You are not logged in.
I am running XFCE 4.10 on my desktop/testing system on a clean install of Arch. Everything seems to work just fine, but I get these two messages when I log in to XFCE (this happens when logging in through SLiM and the command line)...
First Message:
Modifying the panel is not allowed: Because the panel is running in kiosk mode, you are not allowed to make changes to the panel configuration as a regular user.
(after clicking close, this box brings up the preferences window for the panel)
Second Message (appears regardless if I click close on the first message box):
Failed to show the preferences dialog: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(after clicking close, depending on how long I wait to click close, I may have to close out numerous dialog boxes)
Now, it is worth noting that the panel did not load the first time I used XFCE on this installation (it's the only desktop environment I've installed since I installed Arch on this system), so I went to the right click menu on the desktop (then went to Applications -> Settings -> Panel Settings) and configured the panel. I screwed up the installation of graphics on this system (there's some issue with the Intel driver that required me to install something or change some configuration file somewhere), so when the first dialog box asked about the panel, I think I said I wanted one empty panel, but I was preoccupied with fonts not loading correctly (but I fixed that), so I didn't configure the panel until later.
Anyways, even though the first message says I cannot make changes to the panel, I have always been able to on this system (changes persist after log out, reboot, etc.). I have done some research into this error message, but it seems like there are only guides to enable the kiosk mode in XFCE, but none to disable it.
Any help on this is appreciated.
Last edited by ipeters61 (2013-07-01 20:26:13)
My Arch Systems:
Dell Studio 1555, Intel Core 2 Duo 2.2 GHz, 4 GB DDR2 Memory, 500 GB Hard Drive, Intel 4 Series Graphics
HP Pavilion 742c, Intel Pentium 4 2.0 GHz, 1.25 GB DDR Memory, 40 GB Hard Drive, Intel 845 Graphics
HP Omnibook XE3, Intel Pentium III-M 1.06 GHz, 640 MB PC133 Memory, 20 GB Hard Drive, Intel 830 Graphics
Offline
I tried clearing the Saved Sessions in the Session and Startup preferences panel. Now, it's asking me if I want to Execute the xfce4-panel whenever I log on (it doesn't complain about not being able to open a dialog box anymore). I click Execute in the first dialog box and it gives me the kiosk error, I click it the second time (either execute or cancel) and the preferences panel loads.
My Arch Systems:
Dell Studio 1555, Intel Core 2 Duo 2.2 GHz, 4 GB DDR2 Memory, 500 GB Hard Drive, Intel 4 Series Graphics
HP Pavilion 742c, Intel Pentium 4 2.0 GHz, 1.25 GB DDR Memory, 40 GB Hard Drive, Intel 845 Graphics
HP Omnibook XE3, Intel Pentium III-M 1.06 GHz, 640 MB PC133 Memory, 20 GB Hard Drive, Intel 830 Graphics
Offline
Take a look at this. You could try to either edit /etc/xdg/xfce4/kiosk/kioskrc if it is present, or rename it
(deleting is a bit extreme) and see what happens.
Offline
Take a look at this. You could try to either edit /etc/xdg/xfce4/kiosk/kioskrc if it is present, or rename it
(deleting is a bit extreme) and see what happens.
Yeah, I already tried that (I actually went so far as to delete the kiosk directory), tried rebooting a few times, and while the file never was regenerated, but nothing happened.
I'd kept coming across that page but it didn't provide me with anything helpful. I may try to remake the file and just set CustomizePanel to equal ALL and see what happens.
Last edited by ipeters61 (2013-06-30 04:28:50)
My Arch Systems:
Dell Studio 1555, Intel Core 2 Duo 2.2 GHz, 4 GB DDR2 Memory, 500 GB Hard Drive, Intel 4 Series Graphics
HP Pavilion 742c, Intel Pentium 4 2.0 GHz, 1.25 GB DDR Memory, 40 GB Hard Drive, Intel 845 Graphics
HP Omnibook XE3, Intel Pentium III-M 1.06 GHz, 640 MB PC133 Memory, 20 GB Hard Drive, Intel 830 Graphics
Offline
Check /home/<your username>/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml for something like
<channel name="xfce4-panel" version="1.0" locked="*" unlocked="root;@wheel">
Normally it should look like this
<channel name="xfce4-panel" version="1.0">
Should also look at /etc/xdg/xfce4/panel/default.xml
Last edited by henk (2013-06-30 07:52:18)
Offline
Both look clean to me. This is my ~/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml: click here
My Arch Systems:
Dell Studio 1555, Intel Core 2 Duo 2.2 GHz, 4 GB DDR2 Memory, 500 GB Hard Drive, Intel 4 Series Graphics
HP Pavilion 742c, Intel Pentium 4 2.0 GHz, 1.25 GB DDR Memory, 40 GB Hard Drive, Intel 845 Graphics
HP Omnibook XE3, Intel Pentium III-M 1.06 GHz, 640 MB PC133 Memory, 20 GB Hard Drive, Intel 830 Graphics
Offline
Found this on the mentioned website:
Undo panel lockdown (reverse the kiosk mode)
8.1. Reversing the panel lockdown is easy: simply remove the file xfce4-panel.xml from the system folder in which you placed it earlier on.
Removal by terminal command is easiest:
- Open a terminal:
Copy and paste the following magical incantation into the terminal (this is one line):
sudo rm -v /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
Press Enter.
- Reboot your computer.
The panel lockdown has now been undone, for all user accounts.
Offline
See what happens with a new clean user, then you can see if its a global or user problem
bitcoin: 1G62YGRFkMDwhGr5T5YGovfsxLx44eZo7U
Offline
Apparently the /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml file didn't even exist.
jrussel, you were right, it was a user issue, I created a test account and it worked fine. Luckily this is a fresh install, so I didn't worry about having to remove my account without having problems, but I'm still just wondering how this even happened in the first place.
I deleted and recreated my user account and now it's working.
My Arch Systems:
Dell Studio 1555, Intel Core 2 Duo 2.2 GHz, 4 GB DDR2 Memory, 500 GB Hard Drive, Intel 4 Series Graphics
HP Pavilion 742c, Intel Pentium 4 2.0 GHz, 1.25 GB DDR Memory, 40 GB Hard Drive, Intel 845 Graphics
HP Omnibook XE3, Intel Pentium III-M 1.06 GHz, 640 MB PC133 Memory, 20 GB Hard Drive, Intel 830 Graphics
Offline