You are not logged in.
Hi guys.
I have a laptop with an integrated Intel HD4000 graphic card.
Since the gnome 3.8 update, I had problem with GDM, which sometimes got stuck on login, refusing to load gnome-shell. So I since use the SNA acceleration method instead of UXA, which solves this problem.
But then appears an other problem : strange distortion on QT apps menus. Here is an exemple with VLC :
But this wasn't stopping videos to play correctly, so after testing a few parameters available in the wiki and being unable to solve it, I was thinking to just wait for a graphic driver update, as I had read that some problems could be solve by the next update.
Then come the update : problem is still here, and now I have that with firefox:
This is supposed to be the Archlinux logo you can see in the top left corner of the forum…
So my asking is:
- does anyone know what to do to have SNA working properly ?
- OR does anyone know how to make GDM work correctly with UXA acceleration ?
I don't really care about using SNA or UXA, as I didn't see a performance difference, so one or the other will be great.
(off course, if someone know how to fix them both, I will not complain, having choice is always better
)
Thanks in advance !
« En essayant continuellement, on finit par réussir.
Donc plus ça rate, plus ça a de chance de marcher. »
Devise Shadock
Offline
I have intel hd4000 and haven't seen issues like this yet with SNA, although I have yet to try any QT apps (but I do use firefox). Does it happen all the time, or intermittently?
Offline
Not all the time, and seems totaly random… I also have the problem with gnome aisleriot. The same phenomenon appears while moving the cards (and totaly randomly again…).
« En essayant continuellement, on finit par réussir.
Donc plus ça rate, plus ça a de chance de marcher. »
Devise Shadock
Offline
I can confirm the issue but it only happens in firefox here[1], never seen it in Qt apps (and I use mostly Qt apps)
[1] Intel HD4000, sna enabled.
Last edited by Box0 (2013-06-28 15:15:32)
Offline
I have the same error in Firefox on Intel HD2500.
Offline
Since the gnome 3.8 update, I had problem with GDM, which sometimes got stuck on login, refusing to load gnome-shell. So I since use the SNA acceleration method instead of UXA, which solves this problem.
The same problem with gdm and gnome-shell hit my Archlinux system a few days ago. I still have the problem --- none of the "solutions" has helped and I can not run gdm or gnome-shell (not even from slim or kdm). On my Manjaro system everything is fine, for now. Maybe it will break later as part of the delayed-breakage feature of Manjaro ![]()
Does anyone have a (real) fix for the gdm/gnome-shell breakage?
Offline
Not sure if this will help, but try adding the following from comment #1 to /etc/environment
https://bugzilla.gnome.org/show_bug.cgi?id=657071#c1
Probably will at least require a logout and login to take effect.
Offline
Not sure if this will help, but try.....
Wow! A fix from 2011 got my gdm working again! Thank you!
With a couple of reboots I was able to even log into gnome-shell. All of my shell extensions are gone (??) but it's an easy matter to get them back.
Gnome 3.8 is a strange and fragile thing.
You saved me from wiping my Archlinux installation and starting again from scratch...I strongly believe that every problem should be fixed without resorting to the "fresh install" magic but I almost gave up this time.
Offline
David Batson wrote:Not sure if this will help, but try.....
Wow! A fix from 2011 got my gdm working again! Thank you!
With a couple of reboots I was able to even log into gnome-shell. All of my shell extensions are gone (??) but it's an easy matter to get them back.
Gnome 3.8 is a strange and fragile thing.
You saved me from wiping my Archlinux installation and starting again from scratch...I strongly believe that every problem should be fixed without resorting to the "fresh install" magic but I almost gave up this time.
I think Gnome is exposing bugs in the intel driver, mesa or both.
Offline
I think Gnome is exposing bugs in the intel driver, mesa or both.
Then that's a good thing.
Offline
David Batson wrote:Not sure if this will help, but try.....
Wow! A fix from 2011 got my gdm working again! Thank you!
With a couple of reboots I was able to even log into gnome-shell. All of my shell extensions are gone (??) but it's an easy matter to get them back.
Gnome 3.8 is a strange and fragile thing.
You saved me from wiping my Archlinux installation and starting again from scratch...I strongly believe that every problem should be fixed without resorting to the "fresh install" magic but I almost gave up this time.
ahh that may be why I wasn't having issues, I always use that workaround, first thing I do on any gnome install on an intel machine, because that workaround is needed to remove video-tearing on intel with gnome-shell (without that work around there may appear to be no visible screen tearing, but when watching fullscreen video you will notice tearing near the top)
Last edited by bwat47 (2013-06-28 23:45:25)
Offline
Sadly, I also already used it to avoid video tearing like bwat47. I tried to remove it, but it didn't change a thing…
« En essayant continuellement, on finit par réussir.
Donc plus ça rate, plus ça a de chance de marcher. »
Devise Shadock
Offline
Have you installed libva and libva-intel-driver and mesa?
# pacman -Ss libva | grep installed
extra/libva 1.1.1-1 [installed]
extra/libva-intel-driver 1.0.20-1 [installed]
extra/libva-vdpau-driver 0.7.4-1 [installed]
# pacman -Ss mesa | grep installed
extra/glu 9.0.0-2 [installed]
extra/intel-dri 9.1.3-1 [installed]
extra/mesa 9.1.3-1 [installed]
extra/mesa-demos 8.1.0-1 [installed]
extra/mesa-libgl 9.1.3-1 [installed]
multilib/lib32-mesa 9.1.3-2 [installed]
multilib/lib32-mesa-libgl 9.1.3-2 [installed][Not sure what vdpau is doing there]
Offline
I was wondering about the vdpau there David Baston. Just as an FYI, instead of grepping a --sync --search (-Ss) for "installed", you can just do "pacman -Qs mesa" and get the same info.
Last edited by WonderWoofy (2013-06-30 08:00:02)
Offline
Thanks for the tip WonderWoofy. FWIW, I just now uninstalled libva-vdpau-driver. Also just performed a system update, so those file versions posted above are out-of-date.
Offline
Thanks for the tip WonderWoofy. FWIW, I just now uninstalled libva-vdpau-driver. Also just performed a system update, so those file versions posted above are out-of-date.
Offline
Both mesa and libva are installed on my system.
$ pacman -Qs mesa
local/glu 9.0.0-2
local/intel-dri 9.1.3-2
local/lib32-intel-dri 9.1.3-3
local/lib32-mesa 9.1.3-3
local/lib32-mesa-libgl 9.1.3-3
local/mesa 9.1.3-2
local/mesa-demos 8.1.0-1
local/mesa-libgl 9.1.3-2pacman -Qs libva
local/libva 1.2.1-1
local/libva-intel-driver 1.2.0-1Last edited by Cthulhu82 (2013-06-30 21:20:15)
« En essayant continuellement, on finit par réussir.
Donc plus ça rate, plus ça a de chance de marcher. »
Devise Shadock
Offline
I just noticed a very strange thing : when SNA is enabled, my nvidia graphic card performance are affected… Running « primusrun glxspheres » lead to a score of 48 fps, when it is 60 fps (syncing with the lcd monitor) with UXA.
I also still have artifacts with Aisleriot when running it with Bumblebee.
I don't know if it can help to find the origin of the problem, but right now, I have no idea what to do more…
« En essayant continuellement, on finit par réussir.
Donc plus ça rate, plus ça a de chance de marcher. »
Devise Shadock
Offline
I am experiencing similar issues. Especially in firefox, often images on websites become corrupted as shown in your first post. And QT apps also behave as you described. My usual setup is XFCE + Compton-WM. However, upon changing my desktop to Openbox, everything is shiny.
The main difference is, that Openbox is not using compositing, whereas Compton does. Maybe you could try this and see if it helps. Then we could narrow it down a bit.
My graphics chip is an Intel Ironlake (Arrandale).
Last edited by toki (2013-07-04 20:58:05)
Offline