You are not logged in.
My guess is that this is a fairly simple configuration issue, but as a fairly inexperienced Arch user, I just haven't been able to put it together.
The problem started after I did a fresh Arch re-install on my laptop, so most of the configurations and settings should have been set to default. I installed MariaDB and ran
# mysql_secure_installationand
# mysql_upgrade -u root -p, but when I try to start Akonadi using Mysql, I get the following error log:
Akonadi Server Self-Test Report
===============================
Test 1: SUCCESS
--------
Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.
File content of '/home/tedro/.config/akonadi/akonadiserverrc':
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=
Options="UNIX_SOCKET=/home/tedro/.local/share/akonadi/socket-tedroarchlaptop/mysql.socket"
ServerPath=/usr/bin/mysqld
StartServer=true
User=
Password=
[QPSQL]
StartServer=true
Name=akonadi
Host=
User=
Password=
Port=5432
[SQLITE]
Name=akonadi
[QSQLITE3]
Name=/home/tedro/.local/share/akonadi/akonadi.db
[Debug]
Tracer=null
Test 2: SUCCESS
--------
Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.
Test 3: SUCCESS
--------
MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/bin/mysqld'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.
Test 4: SUCCESS
--------
MySQL server is executable.
Details: MySQL server found: /usr/bin/mysqld Ver 5.5.31-MariaDB-log for Linux on x86_64 (Source distribution)
Test 5: SUCCESS
--------
No current MySQL error log found.
Details: The MySQL server did not report any errors during this startup. The log can be found in '/home/tedro/.local/share/akonadi/db_data/mysql.err'.
Test 6: SUCCESS
--------
MySQL server default configuration found.
Details: The default configuration for the MySQL server was found and is readable at <a href='/usr/share/config/akonadi/mysql-global.conf'>/usr/share/config/akonadi/mysql-global.conf</a>.
File content of '/usr/share/config/akonadi/mysql-global.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 7: SKIP
--------
MySQL server custom configuration not available.
Details: The custom configuration for the MySQL server was not found but is optional.
Test 8: SUCCESS
--------
MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='/home/tedro/.local/share/akonadi/mysql.conf'>/home/tedro/.local/share/akonadi/mysql.conf</a> and is readable.
File content of '/home/tedro/.local/share/akonadi/mysql.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
#
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Test 9: SUCCESS
--------
akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.9.2
Test 10: ERROR
--------
Akonadi control process not registered at D-Bus.
Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 11: ERROR
--------
Akonadi server process not registered at D-Bus.
Details: The Akonadi server process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.
Test 12: SUCCESS
--------
Nepomuk search service registered at D-Bus.
Details: The Nepomuk search service is registered at D-Bus which typically indicates it is operational.
Test 13: SUCCESS
--------
Nepomuk search service uses an appropriate backend.
Details: The Nepomuk search service uses one of the recommended backends.
Test 14: SKIP
--------
Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.
Test 15: SUCCESS
--------
Resource agents found.
Details: At least one resource agent has been found.
Directory listing of '/usr/share/akonadi/agents':
akonadinepomukfeederagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
invitationsagent.desktop
kabcresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kcalresource.desktop
kdeaccountsresource.desktop
knutresource.desktop
kolabproxyresource.desktop
localbookmarksresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
microblog.desktop
mixedmaildirresource.desktop
mtdummyresource.desktop
nepomuktagresource.desktop
nntpresource.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
vcarddirresource.desktop
vcardresource.desktop
Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/share:/usr/local/share'
Test 16: ERROR
--------
Current Akonadi server error log found.
Details: The Akonadi server reported errors during its current startup. The log can be found in <a href='/home/tedro/.local/share/akonadi/akonadiserver.error'>/home/tedro/.local/share/akonadi/akonadiserver.error</a>.
File content of '/home/tedro/.local/share/akonadi/akonadiserver.error':
Database process exited unexpectedly during initial connection!
executable: "/usr/bin/mysqld"
arguments: ("--defaults-file=/home/tedro/.local/share/akonadi/mysql.conf", "--datadir=/home/tedro/.local/share/akonadi/db_data/", "--socket=/home/tedro/.local/share/akonadi/socket-tedroarchlaptop/mysql.socket")
stdout: ""
stderr: "Warning: World-writable config file '/home/tedro/.local/share/akonadi/mysql.conf' is ignored
130705 8:34:55 InnoDB: The InnoDB memory heap is disabled
130705 8:34:55 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130705 8:34:55 InnoDB: Compressed tables use zlib 1.2.8
130705 8:34:55 InnoDB: Initializing buffer pool, size = 128.0M
130705 8:34:55 InnoDB: Completed initialization of buffer pool
130705 8:34:55 InnoDB: highest supported file format is Barracuda.
130705 8:34:55 InnoDB: Waiting for the background threads to start
130705 8:34:56 Percona XtraDB (http://www.percona.com) 5.5.31-MariaDB-30.2 started; log sequence number 1597945
130705 8:34:56 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it.
130705 8:34:56 [Note] Server socket created on IP: '0.0.0.0'.
130705 8:34:56 [ERROR] Can't start server: Bind on TCP/IP port. Got error: 98: Address already in use
130705 8:34:56 [ERROR] Do you already have another mysqld server running on port: 3306 ?
130705 8:34:56 [ERROR] Aborting
130705 8:34:56 InnoDB: Starting shutdown...
130705 8:34:56 InnoDB: Shutdown completed; log sequence number 1597945
130705 8:34:56 [Note] /usr/bin/mysqld: Shutdown complete
"
exit code: 1
process error: "Process operation timed out"
"[
0: akonadiserver(_Z11akBacktracev+0x38) [0x450008]
1: akonadiserver() [0x45027d]
2: /usr/lib/libc.so.6(+0x35240) [0x7f01f67ba240]
3: /usr/lib/libc.so.6(gsignal+0x39) [0x7f01f67ba1c9]
4: /usr/lib/libc.so.6(abort+0x148) [0x7f01f67bb5c8]
5: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x5f) [0x7f01f829e90f]
6: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0x9d) [0x45249d]
7: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb0) [0x7f01f8339530]
8: /usr/lib/libQtCore.so.4(+0x11893d) [0x7f01f834693d]
9: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x33) [0x7f01f834f523]
10: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1be2) [0x4ce412]
11: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xc7) [0x453037]
12: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xb2) [0x454dc2]
13: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x2d) [0x45645d]
14: akonadiserver(main+0x1b7) [0x448177]
15: /usr/lib/libc.so.6(__libc_start_main+0xf5) [0x7f01f67a6a15]
16: akonadiserver() [0x4489b9]
]
"
Test 17: ERROR
--------
Previous Akonadi server error log found.
Details: The Akonadi server reported errors during its previous startup. The log can be found in <a href='/home/tedro/.local/share/akonadi/akonadiserver.error.old'>/home/tedro/.local/share/akonadi/akonadiserver.error.old</a>.
File content of '/home/tedro/.local/share/akonadi/akonadiserver.error.old':
Database process exited unexpectedly during initial connection!
executable: "/usr/bin/mysqld"
arguments: ("--defaults-file=/home/tedro/.local/share/akonadi/mysql.conf", "--datadir=/home/tedro/.local/share/akonadi/db_data/", "--socket=/home/tedro/.local/share/akonadi/socket-tedroarchlaptop/mysql.socket")
stdout: ""
stderr: "Warning: World-writable config file '/home/tedro/.local/share/akonadi/mysql.conf' is ignored
130705 8:34:52 InnoDB: The InnoDB memory heap is disabled
130705 8:34:52 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130705 8:34:52 InnoDB: Compressed tables use zlib 1.2.8
130705 8:34:52 InnoDB: Initializing buffer pool, size = 128.0M
130705 8:34:52 InnoDB: Completed initialization of buffer pool
130705 8:34:52 InnoDB: highest supported file format is Barracuda.
130705 8:34:53 InnoDB: Waiting for the background threads to start
130705 8:34:54 Percona XtraDB (http://www.percona.com) 5.5.31-MariaDB-30.2 started; log sequence number 1597945
130705 8:34:54 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it.
130705 8:34:54 [Note] Server socket created on IP: '0.0.0.0'.
130705 8:34:54 [ERROR] Can't start server: Bind on TCP/IP port. Got error: 98: Address already in use
130705 8:34:54 [ERROR] Do you already have another mysqld server running on port: 3306 ?
130705 8:34:54 [ERROR] Aborting
130705 8:34:54 InnoDB: Starting shutdown...
130705 8:34:54 InnoDB: Shutdown completed; log sequence number 1597945
130705 8:34:54 [Note] /usr/bin/mysqld: Shutdown complete
"
exit code: 1
process error: "Process operation timed out"
"[
0: akonadiserver(_Z11akBacktracev+0x38) [0x450008]
1: akonadiserver() [0x45027d]
2: /usr/lib/libc.so.6(+0x35240) [0x7f28f0a0e240]
3: /usr/lib/libc.so.6(gsignal+0x39) [0x7f28f0a0e1c9]
4: /usr/lib/libc.so.6(abort+0x148) [0x7f28f0a0f5c8]
5: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x5f) [0x7f28f24f290f]
6: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0x9d) [0x45249d]
7: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0xb0) [0x7f28f258d530]
8: /usr/lib/libQtCore.so.4(+0x11893d) [0x7f28f259a93d]
9: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x33) [0x7f28f25a3523]
10: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1be2) [0x4ce412]
11: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xc7) [0x453037]
12: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xb2) [0x454dc2]
13: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x2d) [0x45645d]
14: akonadiserver(main+0x1b7) [0x448177]
15: /usr/lib/libc.so.6(__libc_start_main+0xf5) [0x7f28f09faa15]
16: akonadiserver() [0x4489b9]
]
"
Test 18: SUCCESS
--------
No current Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its current startup.
Test 19: SUCCESS
--------
No previous Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its previous startup.The output of systemctl status is:
# systemctl status mysqld.service
mysqld.service - MariaDB database server
Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled)
Active: active (running) since Fri 2013-07-05 08:34:12 CEST; 2s ago
Process: 1595 ExecStartPost=/usr/bin/mysqld-post (code=exited, status=0/SUCCESS)
Main PID: 1594 (mysqld)
CGroup: name=systemd:/system/mysqld.service
ââ1594 /usr/bin/mysqld --pid-file=/run/mysqld/mysqld.pid
Jul 05 08:34:10 tedroarchlaptop mysqld[1594]: 130705 8:34:10 InnoDB: Initializing buffer pool, size = 128.0M
Jul 05 08:34:10 tedroarchlaptop mysqld[1594]: 130705 8:34:10 InnoDB: Completed initialization of buffer pool
Jul 05 08:34:10 tedroarchlaptop mysqld[1594]: 130705 8:34:10 InnoDB: highest supported file format is Barracuda.
Jul 05 08:34:10 tedroarchlaptop mysqld[1594]: 130705 8:34:10 InnoDB: Waiting for the background threads to start
Jul 05 08:34:11 tedroarchlaptop mysqld[1594]: 130705 8:34:11 Percona XtraDB (http://www.percona.com) 5.5.31-MariaDB-30.2 started; log sequence number 1597991
Jul 05 08:34:11 tedroarchlaptop mysqld[1594]: 130705 8:34:11 [Note] Server socket created on IP: '0.0.0.0'.
Jul 05 08:34:11 tedroarchlaptop mysqld[1594]: 130705 8:34:11 [Note] Event Scheduler: Loaded 0 events
Jul 05 08:34:11 tedroarchlaptop mysqld[1594]: 130705 8:34:11 [Note] /usr/bin/mysqld: ready for connections.
Jul 05 08:34:11 tedroarchlaptop mysqld[1594]: Version: '5.5.31-MariaDB-log' socket: '/run/mysqld/mysqld.sock' port: 3306 Source distribution
Jul 05 08:34:12 tedroarchlaptop systemd[1]: Started MariaDB database server.On a related note (I think), Amaork does not start at all. Given the dependency on Mysql, I'm guessing that the problems are related (please let me know if this belongs on a different thread). Here is the debugging output:
$ amarok
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 14: reading configurations from ~/.fonts.conf is deprecated.
Warning: World-writable config file '/home/tedro/.kde4/share/apps/amarok/my.cnf' is ignored
130705 10:37:58 InnoDB: The InnoDB memory heap is disabled
130705 10:37:58 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130705 10:37:58 InnoDB: Compressed tables use zlib 1.2.8
130705 10:37:58 InnoDB: Initializing buffer pool, size = 128.0M
130705 10:37:58 InnoDB: Completed initialization of buffer pool
130705 10:37:58 InnoDB: Operating system error number 13 in a file operation.
InnoDB: The error means mysqld does not have the access rights to
InnoDB: the directory.
InnoDB: File name /var/lib/mysql/ibdata1
InnoDB: File operation call: 'create'.
InnoDB: Cannot continue operation.
unnamed app(2346): Communication problem with "amarok" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Message did not receive a reply (timeout by message bus)" "Please let me know if I need to post any additional configuration files or outputs. After running Arch for over a year, this is the first issue that I have not been able to resolve on my own by researching the forums.
Thanks!
Offline