You are not logged in.

#1 2013-09-09 18:04:43

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,330
Website

Booting into linux-3.11-1 causes network to break [solved]

I cherry picked linux-3.11-1 and linux-firmware-20130903 out of [i686 testing] on a 10-year-old machine (nforce2-based motherboard, model Asus A7N8X-E Deluxe).  Upon rebooting, into the new kernel, I am left with a partially functional network.  Downgrading/rebooting fixes the issue. 

What works:
*Netctl successfully bring up the interface
*I can ping internal IP addresses (
*I can resolve domain names; wget can start a download from the aur (aur.archlinux.org gets resolved to a numerical IP but the download never starts).

What doesn't work:
*I cannot ping external addresses (names or numerical)
*I cannot ssh out or into the box
*I cannot receive data via wget which just hangs indefinitely.

Not quite sure where to start since systemd doesn't report any problems with netctl coming up under 3.11-1-ARCH.  Here is the dmesg output under 3.11-1-ARCH but again, I don't see anything obvious pointing to an error.  Thoughts are welcomed.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-1-ARCH (tobias@testing-i686) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Sep 3 09:40:44 CEST 2013
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.2 present.
[    0.000000] DMI: ASUSTeK Computer INC. A7N8X-E/A7N8X-E, BIOS ASUS A7N8X-E Deluxe ACPI BIOS Rev 1013  11/12/2004
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0A0000000 mask FE0000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[    0.000000]  [mem 0x37000000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[    0.000000]  [mem 0x30000000-0x36ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x0177b000, 0x0177bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37840000-0x37c17fff]
[    0.000000] Allocated new RAMDISK: [mem 0x37426000-0x377fd85f]
[    0.000000] Move RAMDISK from [mem 0x37840000-0x37c1785f] to [mem 0x37426000-0x377fd85f]
[    0.000000] ACPI: RSDP 000f75e0 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 3fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 3fff30c0 04561 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 3fff0000 00040
[    0.000000] ACPI: APIC 3fff7640 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x0177c000, 0x0177cfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x3ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x3ffeffff]
[    0.000000] On node 0 totalpages: 262031
[    0.000000] free_area_init_node: node 0, pgdat c15d7680, node_mem_map f6c26020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34802 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f6c11000 s33536 r0 d23808 u57344
[    0.000000] pcpu-alloc: s33536 r0 d23808 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260255
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e44cf5d1-6138-4fcd-9a42-24ea02a17429 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2097016 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[    0.000000] Memory: 1025320K/1048124K available (4259K kernel code, 430K rwdata, 1356K rodata, 608K init, 948K bss, 22804K reserved, 139208K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc15e9000 - 0xc1681000   ( 608 kB)
      .data : 0xc1428f5e - 0xc15e8940   (1790 kB)
      .text : 0xc1000000 - 0xc1428f5e   (4259 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6406000 soft=f6408000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2191.342 MHz processor
[    0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 4384.29 BogoMIPS (lpj=7304473)
[    0.003340] pid_max: default: 32768 minimum: 301
[    0.003404] Security Framework initialized
[    0.003424] AppArmor: AppArmor disabled by boot time parameter
[    0.003442] Mount-cache hash table entries: 512
[    0.003784] Initializing cgroup subsys memory
[    0.003810] Initializing cgroup subsys devices
[    0.003814] Initializing cgroup subsys freezer
[    0.003817] Initializing cgroup subsys net_cls
[    0.003820] Initializing cgroup subsys blkio
[    0.003857] mce: CPU supports 4 MCE banks
[    0.003878] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: -1
[    0.010167] Freeing SMP alternatives memory: 20K (c1681000 - c1686000)
[    0.011045] ACPI: Core revision 20130517
[    0.014805] ACPI: All ACPI Tables successfully acquired
[    0.015605] ftrace: allocating 19083 entries in 38 pages
[    0.023487] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.023931] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.058245] smpboot: CPU0: AMD Athlon(tm) XP 3200+ (fam: 06, model: 0a, stepping: 00)
[    0.059999] Performance Events: AMD PMU driver.
[    0.059999] ... version:                0
[    0.059999] ... bit width:              48
[    0.059999] ... generic registers:      4
[    0.059999] ... value mask:             0000ffffffffffff
[    0.059999] ... max period:             00007fffffffffff
[    0.059999] ... fixed-purpose events:   0
[    0.059999] ... event mask:             000000000000000f
[    0.076672] Brought up 1 CPUs
[    0.076679] smpboot: Total of 1 processors activated (4384.29 BogoMIPS)
[    0.077080] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.077245] devtmpfs: initialized
[    0.077523] PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes)
[    0.079094] RTC time: 17:00:47, date: 09/09/13
[    0.079157] NET: Registered protocol family 16
[    0.079371] ACPI: bus type PCI registered
[    0.079375] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.111138] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
[    0.111140] PCI: Using configuration type 1 for base access
[    0.112142] bio: create slab <bio-0> at 0
[    0.112302] ACPI: Added _OSI(Module Device)
[    0.112305] ACPI: Added _OSI(Processor Device)
[    0.112307] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.112310] ACPI: Added _OSI(Processor Aggregator Device)
[    0.113217] ACPI: EC: Look up EC in DSDT
[    0.116900] ACPI: Interpreter enabled
[    0.116919] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.116925] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
[    0.116938] ACPI: (supports S0 S1 S4 S5)
[    0.116941] ACPI: Using IOAPIC for interrupt routing
[    0.116978] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.117081] ACPI: No dock devices found.
[    0.125228] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.125323] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.125327] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.125331] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.125334] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.125337] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.125340] PCI: root bus 00: using default resources
[    0.125344] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.125547] PCI host bridge to bus 0000:00
[    0.125553] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.125556] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.125559] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.125574] pci 0000:00:00.0: [10de:01e0] type 00 class 0x060000
[    0.125584] pci 0000:00:00.0: reg 0x10: [mem 0xa0000000-0xbfffffff pref]
[    0.125600] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[    0.125733] pci 0000:00:00.1: [10de:01eb] type 00 class 0x050000
[    0.125874] pci 0000:00:00.2: [10de:01ee] type 00 class 0x050000
[    0.126005] pci 0000:00:00.3: [10de:01ed] type 00 class 0x050000
[    0.126129] pci 0000:00:00.4: [10de:01ec] type 00 class 0x050000
[    0.126258] pci 0000:00:00.5: [10de:01ef] type 00 class 0x050000
[    0.126389] pci 0000:00:01.0: [10de:0060] type 00 class 0x060100
[    0.126569] pci 0000:00:01.1: [10de:0064] type 00 class 0x0c0500
[    0.126584] pci 0000:00:01.1: reg 0x10: [io  0xdc00-0xdc1f]
[    0.126640] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.126778] pci 0000:00:02.0: [10de:0067] type 00 class 0x0c0310
[    0.126793] pci 0000:00:02.0: reg 0x10: [mem 0xd6083000-0xd6083fff]
[    0.126848] pci 0000:00:02.0: supports D1 D2
[    0.126851] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.126930] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.126984] pci 0000:00:02.1: [10de:0067] type 00 class 0x0c0310
[    0.126999] pci 0000:00:02.1: reg 0x10: [mem 0xd6081000-0xd6081fff]
[    0.127053] pci 0000:00:02.1: supports D1 D2
[    0.127056] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.127135] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.127191] pci 0000:00:02.2: [10de:0068] type 00 class 0x0c0320
[    0.127208] pci 0000:00:02.2: reg 0x10: [mem 0xd6082000-0xd60820ff]
[    0.127272] pci 0000:00:02.2: supports D1 D2
[    0.127275] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.127374] pci 0000:00:02.2: System wakeup disabled by ACPI
[    0.127430] pci 0000:00:05.0: [10de:006b] type 00 class 0x040100
[    0.127445] pci 0000:00:05.0: reg 0x10: [mem 0xd6000000-0xd607ffff]
[    0.127500] pci 0000:00:05.0: supports D1 D2
[    0.127623] pci 0000:00:06.0: [10de:006a] type 00 class 0x040100
[    0.127638] pci 0000:00:06.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.127647] pci 0000:00:06.0: reg 0x14: [io  0xd000-0xd07f]
[    0.127656] pci 0000:00:06.0: reg 0x18: [mem 0xd6084000-0xd6084fff]
[    0.127699] pci 0000:00:06.0: supports D1 D2
[    0.127810] pci 0000:00:08.0: [10de:006c] type 01 class 0x060400
[    0.127911] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.127964] pci 0000:00:09.0: [10de:0065] type 00 class 0x01018a
[    0.128001] pci 0000:00:09.0: reg 0x20: [io  0xf000-0xf00f]
[    0.128162] pci 0000:00:1e.0: [10de:01e8] type 01 class 0x060400
[    0.128336] pci 0000:01:04.0: [11ab:4320] type 00 class 0x020000
[    0.128358] pci 0000:01:04.0: reg 0x10: [mem 0xd5000000-0xd5003fff]
[    0.128370] pci 0000:01:04.0: reg 0x14: [io  0xa000-0xa0ff]
[    0.128417] pci 0000:01:04.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.128456] pci 0000:01:04.0: supports D1 D2
[    0.128459] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128533] pci 0000:01:0b.0: [1095:3112] type 00 class 0x010400
[    0.128553] pci 0000:01:0b.0: reg 0x10: [io  0xa400-0xa407]
[    0.128564] pci 0000:01:0b.0: reg 0x14: [io  0xa800-0xa803]
[    0.128576] pci 0000:01:0b.0: reg 0x18: [io  0xac00-0xac07]
[    0.128587] pci 0000:01:0b.0: reg 0x1c: [io  0xb000-0xb003]
[    0.128599] pci 0000:01:0b.0: reg 0x20: [io  0xb400-0xb40f]
[    0.128611] pci 0000:01:0b.0: reg 0x24: [mem 0xd5004000-0xd50041ff]
[    0.128622] pci 0000:01:0b.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.128652] pci 0000:01:0b.0: supports D1 D2
[    0.128722] pci 0000:00:08.0: PCI bridge to [bus 01]
[    0.128727] pci 0000:00:08.0:   bridge window [io  0xa000-0xbfff]
[    0.128732] pci 0000:00:08.0:   bridge window [mem 0xd4000000-0xd5ffffff]
[    0.128787] pci 0000:03:00.0: [10de:0221] type 00 class 0x030000
[    0.128803] pci 0000:03:00.0: reg 0x10: [mem 0xd1000000-0xd1ffffff]
[    0.128812] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff pref]
[    0.128821] pci 0000:03:00.0: reg 0x18: [mem 0xd2000000-0xd2ffffff]
[    0.128846] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.128944] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.128950] pci 0000:00:1e.0:   bridge window [mem 0xd1000000-0xd3ffffff]
[    0.128955] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.128965] pci_bus 0000:00: on NUMA node 0
[    0.128969] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.128973] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.129112] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.129191] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.129271] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.129346] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.129420] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.129496] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.129579] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.129784] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.129860] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.129933] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.130016] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.130094] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.130174] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.130253] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.130327] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.130401] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.130480] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[    0.130543] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[    0.130605] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[    0.130667] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[    0.130728] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.130822] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[    0.130917] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[    0.131010] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[    0.131104] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
[    0.131197] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[    0.131290] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[    0.131354] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[    0.131445] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[    0.131539] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[    0.131632] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[    0.131725] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[    0.132431] ACPI: \_SB_.PCI0: notify handler is installed
[    0.132471] Found 1 acpi root devices
[    0.132619] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.132621] vgaarb: loaded
[    0.132623] vgaarb: bridge control possible 0000:03:00.0
[    0.132697] PCI: Using ACPI for IRQ routing
[    0.132724] PCI: pci_cache_line_size set to 32 bytes
[    0.132763] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
[    0.132920] NetLabel: Initializing
[    0.132923] NetLabel:  domain hash size = 128
[    0.132925] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.132944] NetLabel:  unlabeled traffic allowed by default
[    0.132995] Switched to clocksource refined-jiffies
[    0.141261] pnp: PnP ACPI init
[    0.141296] ACPI: bus type PNP registered
[    0.141637] system 00:00: [io  0x4000-0x407f] has been reserved
[    0.141641] system 00:00: [io  0x4080-0x40ff] has been reserved
[    0.141645] system 00:00: [io  0x4400-0x447f] has been reserved
[    0.141648] system 00:00: [io  0x4480-0x44ff] has been reserved
[    0.141652] system 00:00: [io  0x4200-0x427f] has been reserved
[    0.141655] system 00:00: [io  0x4280-0x42ff] has been reserved
[    0.141661] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.141707] system 00:01: [io  0x5000-0x503f] has been reserved
[    0.141712] system 00:01: [io  0x5500-0x553f] has been reserved
[    0.141716] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.141932] system 00:02: [mem 0x000d9800-0x000dbfff] has been reserved
[    0.141937] system 00:02: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.141941] system 00:02: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.141945] system 00:02: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.141948] system 00:02: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.141952] system 00:02: [mem 0xffff0000-0xffffffff] has been reserved
[    0.141955] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.141959] system 00:02: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.141962] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.141966] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.141970] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.142573] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.142578] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.142596] pnp 00:04: [dma 4]
[    0.142633] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.142692] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.142733] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.142784] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.143142] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.143443] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.143732] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.143982] pnp 00:0b: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.144194] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.144202] pnp: PnP ACPI: found 13 devices
[    0.144205] ACPI: bus type PNP unregistered
[    0.181223] Switched to clocksource acpi_pm
[    0.181259] pci 0000:00:08.0: BAR 15: assigned [mem 0x40000000-0x400fffff pref]
[    0.181264] pci 0000:01:0b.0: BAR 6: assigned [mem 0x40000000-0x4007ffff pref]
[    0.181269] pci 0000:01:04.0: BAR 6: assigned [mem 0x40080000-0x4009ffff pref]
[    0.181273] pci 0000:00:08.0: PCI bridge to [bus 01]
[    0.181277] pci 0000:00:08.0:   bridge window [io  0xa000-0xbfff]
[    0.181283] pci 0000:00:08.0:   bridge window [mem 0xd4000000-0xd5ffffff]
[    0.181288] pci 0000:00:08.0:   bridge window [mem 0x40000000-0x400fffff pref]
[    0.181296] pci 0000:03:00.0: BAR 6: assigned [mem 0xd3000000-0xd301ffff pref]
[    0.181299] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.181304] pci 0000:00:1e.0:   bridge window [mem 0xd1000000-0xd3ffffff]
[    0.181308] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.181322] pci 0000:00:08.0: setting latency timer to 64
[    0.181330] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.181333] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.181336] pci_bus 0000:01: resource 0 [io  0xa000-0xbfff]
[    0.181339] pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd5ffffff]
[    0.181342] pci_bus 0000:01: resource 2 [mem 0x40000000-0x400fffff pref]
[    0.181346] pci_bus 0000:03: resource 1 [mem 0xd1000000-0xd3ffffff]
[    0.181349] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xcfffffff pref]
[    0.181408] NET: Registered protocol family 2
[    0.181638] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.181714] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.181792] TCP: Hash tables configured (established 8192 bind 8192)
[    0.181862] TCP: reno registered
[    0.181866] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.181887] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.181983] NET: Registered protocol family 1
[    0.182282] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[    0.250255] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[    0.326920] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[    0.327032] pci 0000:03:00.0: Boot video device
[    0.327037] PCI: CLS 32 bytes, default 32
[    0.327105] Unpacking initramfs...
[    0.362835] Freeing initrd memory: 3936K (f7426000 - f77fe000)
[    0.362969] apm: BIOS not found.
[    0.363032] Scanning for low memory corruption every 60 seconds
[    0.363495] audit: initializing netlink socket (disabled)
[    0.363516] type=2000 audit(1378746047.363:1): initialized
[    0.376513] bounce pool size: 64 pages
[    0.376536] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.378493] zbud: loaded
[    0.378602] VFS: Disk quotas dquot_6.5.2
[    0.378668] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.378953] msgmni has been set to 1738
[    0.379253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.379293] io scheduler noop registered
[    0.379296] io scheduler deadline registered
[    0.379339] io scheduler cfq registered (default)
[    0.379504] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.379531] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.379633] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.379636] vesafb: scrolling: redraw
[    0.379639] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.379843] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3072k, total 3072k
[    0.435747] Console: switching to colour frame buffer device 128x48
[    0.491469] fb0: VESA VGA frame buffer device
[    0.491537] GHES: HEST is not enabled!
[    0.491556] isapnp: Scanning for PnP cards...
[    0.804800] isapnp: No Plug & Play device found
[    0.804853] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.825495] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.846111] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.846589] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.846591] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.847491] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.847629] mousedev: PS/2 mouse device common for all mice
[    0.847730] rtc_cmos 00:05: RTC can wake from S4
[    0.847876] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.847904] rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram
[    0.847939] cpuidle: using governor ladder
[    0.847942] cpuidle: using governor menu
[    0.847999] drop_monitor: Initializing network drop monitor service
[    0.848098] TCP: cubic registered
[    0.848278] NET: Registered protocol family 10
[    0.848507] NET: Registered protocol family 17
[    0.848522] Key type dns_resolver registered
[    0.848652] Using IPI No-Shortcut mode
[    0.848762] PM: Hibernation image not present or could not be loaded.
[    0.848784] registered taskstats version 1
[    0.849195]   Magic number: 13:458:36
[    0.849296] rtc_cmos 00:05: setting system clock to 2013-09-09 17:00:48 UTC (1378746048)
[    0.849972] Freeing unused kernel memory: 608K (c15e9000 - c1681000)
[    0.849996] Write protecting the kernel text: 4260k
[    0.850104] Write protecting the kernel read-only data: 1360k
[    0.863566] systemd-udevd[39]: starting version 204
[    0.874646] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.928667] ACPI: bus type USB registered
[    0.928716] usbcore: registered new interface driver usbfs
[    0.928741] usbcore: registered new interface driver hub
[    0.932214] usbcore: registered new device driver usb
[    0.932890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.933073] ehci-pci: EHCI PCI platform driver
[    0.933236] ehci-pci 0000:00:02.2: setting latency timer to 64
[    0.933250] ehci-pci 0000:00:02.2: EHCI Host Controller
[    0.933260] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[    0.933275] ehci-pci 0000:00:02.2: debug port 1
[    0.933310] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[    0.933405] ehci-pci 0000:00:02.2: irq 20, io mem 0xd6082000
[    0.933923] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.934096] ohci-pci: OHCI PCI platform driver
[    0.938056] SCSI subsystem initialized
[    0.943407] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    0.943620] hub 1-0:1.0: USB hub found
[    0.943628] hub 1-0:1.0: 6 ports detected
[    0.943966] ohci-pci 0000:00:02.0: setting latency timer to 64
[    0.943971] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    0.943979] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.944021] ohci-pci 0000:00:02.0: irq 22, io mem 0xd6083000
[    0.947956] ACPI: bus type ATA registered
[    0.952016] libata version 3.00 loaded.
[    0.952691] sata_sil 0000:01:0b.0: version 2.4
[    0.952976] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    0.956520] scsi0 : sata_sil
[    0.959744] scsi1 : sata_sil
[    0.959823] ata1: SATA max UDMA/100 mmio m512@0xd5004000 tf 0xd5004080 irq 18
[    0.959828] ata2: SATA max UDMA/100 mmio m512@0xd5004000 tf 0xd50040c0 irq 18
[    0.998900] hub 2-0:1.0: USB hub found
[    0.998912] hub 2-0:1.0: 3 ports detected
[    0.999073] pata_amd 0000:00:09.0: version 0.4.1
[    0.999134] pata_amd 0000:00:09.0: setting latency timer to 64
[    0.999815] scsi2 : pata_amd
[    1.000258] scsi3 : pata_amd
[    1.000549] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.000552] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.000684] ohci-pci 0000:00:02.1: setting latency timer to 64
[    1.000689] ohci-pci 0000:00:02.1: OHCI PCI host controller
[    1.000698] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 3
[    1.000739] ohci-pci 0000:00:02.1: irq 21, io mem 0xd6081000
[    1.055635] hub 3-0:1.0: USB hub found
[    1.055645] hub 3-0:1.0: 3 ports detected
[    1.276705] ata1: SATA link down (SStatus 0 SControl 310)
[    1.363357] tsc: Refined TSC clocksource calibration: 2191.226 MHz
[    1.596715] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    1.603799] ata2.00: HPA detected: current 156299375, native 156301488
[    1.603806] ata2.00: ATA-6: ST380013AS, 3.18, max UDMA/133
[    1.603809] ata2.00: 156299375 sectors, multi 16: LBA48 
[    1.617155] ata2.00: configured for UDMA/100
[    1.617321] scsi 1:0:0:0: Direct-Access     ATA      ST380013AS       3.18 PQ: 0 ANSI: 5
[    1.777042] ata4.00: ATAPI: PIONEER DVD-RW  DVR-107D, 1.21, max UDMA/33
[    1.777051] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13)
[    1.790272] ata4.00: configured for UDMA/33
[    1.797187] scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-107D 1.21 PQ: 0 ANSI: 5
[    1.803907] sd 1:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.803995] sd 1:0:0:0: [sda] Write Protect is off
[    1.804000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.804037] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.812982] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.812989] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.813247] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.856419]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    1.857176] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.363410] Switched to clocksource tsc
[    2.637191] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.355776] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.372392] systemd[1]: Set hostname to <sub>.
[    4.034589] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    4.034668] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.034692] systemd[1]: Expecting device sys-subsystem-net-devices-enp1s4.device...
[    4.034714] systemd[1]: Starting Remote File Systems.
[    4.034733] systemd[1]: Reached target Remote File Systems.
[    4.034751] systemd[1]: Starting Delayed Shutdown Socket.
[    4.034800] systemd[1]: Listening on Delayed Shutdown Socket.
[    4.034817] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    4.034853] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.034870] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    4.034910] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.034933] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    4.034983] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.034999] systemd[1]: Starting Paths.
[    4.035017] systemd[1]: Reached target Paths.
[    4.035035] systemd[1]: Starting Journal Socket.
[    4.035102] systemd[1]: Listening on Journal Socket.
[    4.035126] systemd[1]: Starting Setup Virtual Console...
[    4.073117] systemd[1]: Starting Load Kernel Modules...
[    4.073863] systemd[1]: Starting Journal Service...
[    4.074569] systemd[1]: Started Journal Service.
[    4.074664] systemd[1]: Mounting Debug File System...
[    4.075284] systemd[1]: Starting Encrypted Volumes.
[    4.075313] systemd[1]: Reached target Encrypted Volumes.
[    4.075377] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    4.075555] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.102323] systemd[1]: Started Set Up Additional Binary Formats.
[    4.102460] systemd[1]: Starting udev Kernel Socket.
[    4.102519] systemd[1]: Listening on udev Kernel Socket.
[    4.102611] systemd[1]: Starting udev Control Socket.
[    4.102658] systemd[1]: Listening on udev Control Socket.
[    4.102743] systemd[1]: Starting udev Coldplug all Devices...
[    4.104209] systemd[1]: Mounting Huge Pages File System...
[    4.104909] systemd[1]: Starting Create static device nodes in /dev...
[    4.105595] systemd[1]: Mounting POSIX Message Queue File System...
[    4.128406] systemd[1]: Starting Apply Kernel Variables...
[    4.129193] systemd[1]: Expecting device dev-disk-by\x2dlabel-swap.device...
[    4.129239] systemd[1]: Started File System Check on Root Device.
[    4.129270] systemd[1]: Mounting Temporary Directory...
[    4.150626] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.151333] systemd[1]: Expecting device dev-disk-by\x2dlabel-boot.device...
[    4.151359] systemd[1]: Expecting device dev-disk-by\x2dlabel-homes.device...
[    4.874094] systemd-udevd[109]: starting version 204
[    5.091469] FS-Cache: Loaded
[    5.123824] RPC: Registered named UNIX socket transport module.
[    5.123830] RPC: Registered udp transport module.
[    5.123832] RPC: Registered tcp transport module.
[    5.123834] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.193221] FS-Cache: Netfs 'nfs' registered for caching
[    5.212678] EXT4-fs (sda2): re-mounted. Opts: (null)
[    5.539182] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    5.539194] ACPI: Power Button [PWRB]
[    5.539293] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    5.539297] ACPI: Power Button [PWRF]
[    5.621556] Linux agpgart interface v0.103
[    5.637170] agpgart: Detected NVIDIA nForce2 chipset
[    5.666970] agpgart-nvidia 0000:00:00.0: AGP aperture is 512M @ 0xa0000000
[    5.667026] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.854746] i2c i2c-0: nForce2 SMBus adapter at 0x5000
[    5.854780] i2c i2c-1: nForce2 SMBus adapter at 0x5500
[    5.884663] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[    5.884702] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[    5.916201] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    5.971066] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 701kHz
[    6.020372] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    6.020443] skge: 1.14 addr 0xd5000000 irq 17 chip Yukon-Lite rev 7
[    6.020977] skge 0000:01:04.0 eth0: addr 00:0e:a6:70:b8:12
[    6.080144] systemd-udevd[122]: renamed network interface eth0 to enp1s4
[    6.206695] intel8x0_measure_ac97_clock: measured 52005 usecs (2528 samples)
[    6.206702] intel8x0: clocking to 47397
[    7.463433] Adding 1048572k swap on /dev/sda5.  Priority:-1 extents:1 across:1048572k FS
[    7.938849] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    8.117195] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    9.009004] skge 0000:01:04.0 enp1s4: enabling interface
[    9.012600] IPv6: ADDRCONF(NETDEV_UP): enp1s4: link is not ready
[   11.906824] skge 0000:01:04.0 enp1s4: Link is up at 1000 Mbps, full duplex, flow control both
[   11.906848] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s4: link becomes ready
[   12.093470] skge 0000:01:04.0 enp1s4: disabling interface
[   12.095851] skge 0000:01:04.0 enp1s4: enabling interface
[   15.733743] skge 0000:01:04.0 enp1s4: Link is up at 1000 Mbps, full duplex, flow control both
[   16.197821] NFS: Registering the id_resolver key type
[   16.197847] Key type id_resolver registered
[   16.197849] Key type id_legacy registered

Last edited by graysky (2013-09-10 19:41:43)


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#2 2013-09-09 23:12:40

czubek
Member
From: Alliance College
Registered: 2012-03-08
Posts: 137

Re: Booting into linux-3.11-1 causes network to break [solved]

Message deleted.

Last edited by czubek (2013-09-10 13:26:28)


Arch Linux is suited to the competent user.
Which ranks me right up there at highly incompetent.

Offline

#3 2013-09-09 23:16:17

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,330
Website

Re: Booting into linux-3.11-1 causes network to break [solved]

Ip links as in the coninical name of your NICs?  Mine stayed regardless.


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#4 2013-09-09 23:33:27

czubek
Member
From: Alliance College
Registered: 2012-03-08
Posts: 137

Re: Booting into linux-3.11-1 causes network to break [solved]

Message deleted.

Last edited by czubek (2013-09-10 13:26:54)


Arch Linux is suited to the competent user.
Which ranks me right up there at highly incompetent.

Offline

#5 2013-09-10 08:50:46

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,330
Website

Re: Booting into linux-3.11-1 causes network to break [solved]

I don't observe that when I boot into linux-ck.  For me both ARCH or ck give the same names but broken functionality. The common thread is kernel version 3.11.

Last edited by graysky (2013-09-10 08:52:45)


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#6 2013-09-10 11:13:04

czubek
Member
From: Alliance College
Registered: 2012-03-08
Posts: 137

Re: Booting into linux-3.11-1 causes network to break [solved]

Message deleted.

Last edited by czubek (2013-09-10 13:27:20)


Arch Linux is suited to the competent user.
Which ranks me right up there at highly incompetent.

Offline

#7 2013-09-10 11:52:12

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,330
Website

Re: Booting into linux-3.11-1 causes network to break [solved]

Again, I do not see a name change from 3.10.11 to 3.11.  Something downstream of the NIC is broken.  Please reread my original post to avoid diluting out the thread.  It is not related to NIC name changing.  The NIC's name does not change.

Last edited by graysky (2013-09-10 11:54:55)


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#8 2013-09-10 12:54:49

WorMzy
Forum Moderator
From: England
Registered: 2010-06-16
Posts: 4,843

Re: Booting into linux-3.11-1 causes network to break [solved]

At a guess, there's a problem with the skge module. The latest commit was a month ago: https://github.com/torvalds/linux/commi … 29ccaa5d74

You could try reverting it and see if that resolves your problem.


EDIT: There were three commits: https://github.com/torvalds/linux/commi … ell/skge.c

Last edited by WorMzy (2013-09-10 12:56:25)


Sakura:-
Mobo: ASUS P8Z77-V PRO // Processor: Intel Core i7-3770K 3.4GHz // GFX: nVidia GeForce GTX 970 Ti // RAM: 32GB (4x 8GB) Corsair DDR3 (@ 2133MHz) // Storage: 1x 3TB Seagate SATAII 5x 1TB Samsung SATAII, 2x 120GB Corsair SSD

Online

#9 2013-09-10 19:28:34

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,330
Website

Re: Booting into linux-3.11-1 causes network to break [solved]

WorMzy wrote:

At a guess, there's a problem with the skge module. The latest commit was a month ago: https://github.com/torvalds/linux/commi … 29ccaa5d74

You could try reverting it and see if that resolves your problem.


EDIT: There were three commits: https://github.com/torvalds/linux/commi … ell/skge.c

Excellent suggestion and spot on!  Reverting those three commits gives me a completely functional network again!  Need to report this upstream.  Thank you very much for the idea.

Upstream report: http://marc.info/?l=linux-netdev&m=137884262727796&w=2
Arch report: https://bugs.archlinux.org/task/36865

Last edited by graysky (2013-09-10 19:58:17)


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#10 2013-09-10 21:34:45

jasonwryan
Forum & Wiki Admin
From: .nz
Registered: 2009-05-09
Posts: 18,056
Website

Re: Booting into linux-3.11-1 causes network to break [solved]

czubek don't delete your posts again: https://wiki.archlinux.org/index.php/Fo … way_Street


Arch + dwm   •   Mercurial repos  •   Github

Registered Linux User #482438

Offline

#11 2013-09-10 21:52:46

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,330
Website

Re: Booting into linux-3.11-1 causes network to break [solved]

jasonwryan wrote:

czubek don't delete your posts again: https://wiki.archlinux.org/index.php/Fo … way_Street

I feel kinda bad since I more or less told him or her to stop posting off topic.  I think he/she just wanted to rectify that.  Anyway, lesson learned I trust and time marches on smile

Last edited by graysky (2013-09-10 21:53:23)


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#12 2013-09-20 13:51:32

Mr Green
Forum Fellow
From: U.K.
Registered: 2003-12-21
Posts: 5,745

Re: Booting into linux-3.11-1 causes network to break [solved]

@graysky might be a bit off topic but has linux-ck in aur been patched with a fix?


Mr Green

Offline

#13 2013-09-20 14:26:44

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,330
Website

Re: Booting into linux-3.11-1 causes network to break [solved]

Yes, since v3.11.1-2-ck.


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#14 2013-09-20 14:30:53

Mr Green
Forum Fellow
From: U.K.
Registered: 2003-12-21
Posts: 5,745

Re: Booting into linux-3.11-1 causes network to break [solved]

Thanks wink


Mr Green

Offline

Board footer

Powered by FluxBB