You are not logged in.

#1 2013-09-25 22:03:03

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

[SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi!

I'm having problems with Bumblebee from Kernel 3.10 but I read that Kernel 3.11 solved the problem, I searched and tried possible solutions to my problem unsuccessfully sad

The message shows me when I run "optirun":

[ 5454.262739] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.

[ 5454.262776] [ERROR]Aborting because fallback start is disabled.

I've tried with wiki's solutions, forums solutions...

Configurations files:

/etc/bumblebee/bumblebee.conf:

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=virtualgl
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

/etc/bumblebee/xorg.conf.nvidia

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
   BusID "PCI:01:00.0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

lspci |grep NVIDIA:

01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M] (rev a1)

I hope can help me sad

Thanks! big_smile

Last edited by surrealistic (2013-11-04 18:46:35)

Offline

#2 2013-09-26 13:00:26

jenon
Member
Registered: 2013-09-26
Posts: 1

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Offline

#3 2013-09-27 06:25:58

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi! I've tried wiki's solutions but I don't have the files that show the guide (/etc/X11/xorg.conf.d/20-intel.conf and /etc/X11/xorg.conf.d/10-monitor.conf)

I've tried forums solutions too and I search in Google possible solutions to my problem unsuccessfully. sad

Thanks smile

Offline

#4 2013-09-27 11:42:15

Shawn8901
Member
Registered: 2013-05-07
Posts: 14

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi!
you can run optirun with debug output (-vvv) and attach your dmesg output. maybe acpi is not able to switch on your graphic card or something like this?
Greetz.

Offline

#5 2013-09-28 01:06:59

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi!
The resulto of "optirun -vvv":

[ 1082.890726] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1082.891189] [DEBUG]optirun version 3.2.1 starting...
[ 1082.891204] [DEBUG]Active configuration:
[ 1082.891209] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1082.891214] [DEBUG] X display: :8
[ 1082.891218] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 1082.891222] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1082.891226] [DEBUG] Accel/display bridge: virtualgl
[ 1082.891230] [DEBUG] VGL Compression: proxy
[ 1082.891234] [DEBUG] VGLrun extra options: 
[ 1082.891237] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 1082.891241] [ERROR]Missing argument: application to run
Try `optirun --help' for more information.

Thanks! smile

Offline

#6 2013-09-28 11:20:37

skualito
Member
Registered: 2008-11-19
Posts: 184

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Might be more relevant if you actually launch an application with optirun, try

optirun -vvv glxspheres

Offline

#7 2013-09-28 22:32:48

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Result of "optirun -vvv glxspheres":

[23773.668533] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[23773.668898] [DEBUG]optirun version 3.2.1 starting...
[23773.668918] [DEBUG]Active configuration:
[23773.668923] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[23773.668927] [DEBUG] X display: :8
[23773.668931] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[23773.668935] [DEBUG] Socket path: /var/run/bumblebee.socket
[23773.668939] [DEBUG] Accel/display bridge: virtualgl
[23773.668943] [DEBUG] VGL Compression: proxy
[23773.668946] [DEBUG] VGLrun extra options: 
[23773.668950] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[23773.691430] [INFO]Response: No - error: [XORG] (EE) No devices detected.

[23773.691459] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.

[23773.691465] [DEBUG]Socket closed.
[23773.691483] [ERROR]Aborting because fallback start is disabled.
[23773.691489] [DEBUG]Killing all remaining processes.

Offline

#8 2013-10-01 19:53:09

Shawn8901
Member
Registered: 2013-05-07
Posts: 14

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Do you have a 20-intel.conf in /etc/X11/xorg.conf.d folder?

Offline

#9 2013-10-05 11:50:26

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi!

I don't have 20-intel.conf file in /etc/X11/xorg.conf.d folder, can it be a problem? sad how I can generate the file?

Offline

#10 2013-10-18 16:56:11

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi! I just uninstall, remove and reinstall everything that belongs to Bumblebee, Intel and NVIDIA. When I reboote the system after reinstallation I tried to run optirun glxspheres to check if Bumblebee works right, but when I run optirun glxspheres appears this error sad:

[  818.884164] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X

[  818.884210] [ERROR]Aborting because fallback start is disabled.

This is a new different error that I've never seen sad I don't know that means GLX module.

Can anymore help me please? sad

Thanks!

Offline

#11 2013-10-18 17:04:47

mrunion
Member
From: Jonesborough, TN
Registered: 2007-01-26
Posts: 1,569
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Mine does that after a reboot. But if I run the exact same thing again, it works fine.


Matt

"It is very difficult to educate the educated."

Offline

#12 2013-10-18 17:30:56

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Thank you. I'll to reinstall againt to see if this time works right sad

Offline

#13 2013-10-22 13:44:29

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hi! I tried to re-install again Bumblebee, Intel, NVIDIA, Bbswitch... and still show an error:

[  508.783571] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.

[  508.783626] [ERROR]Aborting because fallback start is disabled.

I'm thinking that the only solution will be reinstall ArchLinux and install everything from scratch sad

Offline

#14 2013-11-04 00:49:58

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

I just re-install ArchLinux and when I run optirun still showing the same error sad Does anyone know a solution for my problen? I hope someone can help me, because I don't know what I can to do to solve the problem.

Thanks! smile

Offline

#15 2013-11-04 07:58:12

skualito
Member
Registered: 2008-11-19
Posts: 184

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

What if you boot with

rcutree.rcu_idle_gp_delay=1

appended to the kernel line?

Last edited by skualito (2013-11-04 07:58:28)

Offline

#16 2013-11-04 09:16:15

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

I used sudo cat /sys/module/rcutree/parameters/rcu_idle_gp_delay and show 4.

Sorry, I don't know what is rcutree and I don't know how to use it sad

How do I know if appended to the kernel line?

Thanks and I'm sorry to be a nuisance! smile

EDIT:

I just installed linux-headers and  now bumblebee work without problems!! big_smile

Thanks for help and I'm sorry for the incoveniences! smile

Last edited by surrealistic (2013-11-04 09:27:40)

Offline

#17 2013-11-04 09:35:34

skualito
Member
Registered: 2008-11-19
Posts: 184

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Have a look at this thread: https://bbs.archlinux.org/viewtopic.php … 0#p1326090
Basically you edit your bootlaoder config file (grub.cfg, or syslinux.cfg e.g).
This parameter did the trick for me... On a fresh install without this parameter bumblebee would not work as intended on my laptop.

Offline

#18 2013-11-04 10:21:57

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

I'll try your solution, because install linux-headers only work one time sad

Offline

#19 2013-11-04 10:38:57

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

I install xf86-input-mouse, try your solution, and reboot. When I try to run optirun first time after reboot, bumblebee work right, but i try a second time and not run sad

[  464.973471] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Server terminated successfully (0). Closing log file.

[  464.973523] [ERROR]Aborting because fallback start is disabled.

Offline

#20 2013-11-04 12:29:32

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

I edited the changes I've made to use default configurations.

Now shows this error:

[  448.716151] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  448.716208] [ERROR]Aborting because fallback start is disabled.

optirun -vvv glxspheres:

[  478.567800] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  478.568034] [INFO]Configured driver: nvidia
[  478.568186] [DEBUG]optirun version 3.2.1 starting...
[  478.568195] [DEBUG]Active configuration:
[  478.568199] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  478.568203] [DEBUG] X display: :8
[  478.568207] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[  478.568211] [DEBUG] Socket path: /var/run/bumblebee.socket
[  478.568214] [DEBUG] Accel/display bridge: auto
[  478.568218] [DEBUG] VGL Compression: proxy
[  478.568222] [DEBUG] VGLrun extra options: 
[  478.568226] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[  478.568247] [DEBUG]Using auto-detected bridge virtualgl
[  478.580196] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  478.580230] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[  478.580238] [DEBUG]Socket closed.
[  478.580261] [ERROR]Aborting because fallback start is disabled.
[  478.580268] [DEBUG]Killing all remaining processes.

Offline

#21 2013-11-04 13:12:17

skualito
Member
Registered: 2008-11-19
Posts: 184

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Hmm, could you post you /var/log/Xorg.8.log? What's the ouput of dmesg|grep bbswitch? You used the "rcutree" option posted above in kernel parameter?

Offline

#22 2013-11-04 13:32:11

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

My /var/log/Xorg.8.log:

[   337.161] 
X.Org X Server 1.14.4
Release Date: 2013-10-31
[   337.161] X Protocol Version 11, Revision 0
[   337.161] Build Operating System: Linux 3.11.6-1-ARCH x86_64 
[   337.161] Current Operating System: Linux h131h-laptop 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[   337.161] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4eb69984-2228-4aba-9863-28a7fa854e51 rw quiet
[   337.161] Build Date: 01 November 2013  05:10:48PM
[   337.161]  
[   337.161] Current version of pixman: 0.30.2
[   337.161] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   337.161] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   337.161] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov  4 14:20:04 2013
[   337.161] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[   337.161] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[   337.161] (==) ServerLayout "Layout0"
[   337.161] (==) No screen section available. Using defaults.
[   337.161] (**) |-->Screen "Default Screen Section" (0)
[   337.161] (**) |   |-->Monitor "<default monitor>"
[   337.161] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   337.161] (**) |   |-->Device "DiscreteNvidia"
[   337.161] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   337.161] (**) Option "AutoAddDevices" "false"
[   337.161] (**) Option "AutoAddGPU" "false"
[   337.161] (**) Not automatically adding devices
[   337.161] (==) Automatically enabling devices
[   337.161] (**) Not automatically adding GPU devices
[   337.161] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   337.162] 	Entry deleted from font path.
[   337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   337.162] 	Entry deleted from font path.
[   337.162] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   337.162] 	Entry deleted from font path.
[   337.162] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   337.162] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[   337.162] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[   337.162] (==) |-->Input Device "<default pointer>"
[   337.162] (==) |-->Input Device "<default keyboard>"
[   337.162] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[   337.162] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[   337.162] (II) Loader magic: 0x7fdc20
[   337.162] (II) Module ABI versions:
[   337.162] 	X.Org ANSI C Emulation: 0.4
[   337.162] 	X.Org Video Driver: 14.1
[   337.162] 	X.Org XInput driver : 19.1
[   337.162] 	X.Org Server Extension : 7.0
[   337.162] (II) xfree86: Adding drm device (/dev/dri/card1)
[   337.162] (II) xfree86: Adding drm device (/dev/dri/card0)
[   337.162] setversion 1.4 failed
[   337.163] (--) PCI:*(0:1:0:0) 10de:0fd2:1025:0648 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128
[   337.163] Initializing built-in extension Generic Event Extension
[   337.163] Initializing built-in extension SHAPE
[   337.163] Initializing built-in extension MIT-SHM
[   337.163] Initializing built-in extension XInputExtension
[   337.163] Initializing built-in extension XTEST
[   337.163] Initializing built-in extension BIG-REQUESTS
[   337.163] Initializing built-in extension SYNC
[   337.163] Initializing built-in extension XKEYBOARD
[   337.163] Initializing built-in extension XC-MISC
[   337.163] Initializing built-in extension SECURITY
[   337.163] Initializing built-in extension XINERAMA
[   337.163] Initializing built-in extension XFIXES
[   337.163] Initializing built-in extension RENDER
[   337.163] Initializing built-in extension RANDR
[   337.164] Initializing built-in extension COMPOSITE
[   337.164] Initializing built-in extension DAMAGE
[   337.164] Initializing built-in extension MIT-SCREEN-SAVER
[   337.164] Initializing built-in extension DOUBLE-BUFFER
[   337.164] Initializing built-in extension RECORD
[   337.164] Initializing built-in extension DPMS
[   337.164] Initializing built-in extension X-Resource
[   337.164] Initializing built-in extension XVideo
[   337.164] Initializing built-in extension XVideo-MotionCompensation
[   337.164] Initializing built-in extension XFree86-VidModeExtension
[   337.164] Initializing built-in extension XFree86-DGA
[   337.164] Initializing built-in extension XFree86-DRI
[   337.164] Initializing built-in extension DRI2
[   337.164] (II) LoadModule: "glx"
[   337.164] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[   337.172] (II) Module glx: vendor="NVIDIA Corporation"
[   337.172] 	compiled for 4.0.2, module version = 1.0.0
[   337.172] 	Module class: X.Org Server Extension
[   337.172] (II) NVIDIA GLX Module  325.15  Wed Jul 31 18:12:00 PDT 2013
[   337.172] Loading extension GLX
[   337.172] (II) LoadModule: "nvidia"
[   337.172] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   337.172] (II) Module nvidia: vendor="NVIDIA Corporation"
[   337.172] 	compiled for 4.0.2, module version = 1.0.0
[   337.172] 	Module class: X.Org Video Driver
[   337.172] (II) LoadModule: "mouse"
[   337.172] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[   337.172] (II) Module mouse: vendor="X.Org Foundation"
[   337.172] 	compiled for 1.14.0, module version = 1.9.0
[   337.172] 	Module class: X.Org XInput Driver
[   337.172] 	ABI class: X.Org XInput driver, version 19.1
[   337.172] (II) LoadModule: "kbd"
[   337.173] (WW) Warning, couldn't open module kbd
[   337.173] (II) UnloadModule: "kbd"
[   337.173] (II) Unloading kbd
[   337.173] (EE) Failed to load module "kbd" (module does not exist, 0)
[   337.173] (II) NVIDIA dlloader X Driver  325.15  Wed Jul 31 17:50:57 PDT 2013
[   337.173] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   337.173] (--) using VT number 1

[   337.173] (II) Loading sub module "fb"
[   337.173] (II) LoadModule: "fb"
[   337.173] (II) Loading /usr/lib/xorg/modules/libfb.so
[   337.173] (II) Module fb: vendor="X.Org Foundation"
[   337.173] 	compiled for 1.14.4, module version = 1.0.0
[   337.173] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   337.173] (WW) Unresolved symbol: fbGetGCPrivateKey
[   337.173] (II) Loading sub module "wfb"
[   337.173] (II) LoadModule: "wfb"
[   337.173] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   337.173] (II) Module wfb: vendor="X.Org Foundation"
[   337.173] 	compiled for 1.14.4, module version = 1.0.0
[   337.173] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   337.173] (II) Loading sub module "shadow"
[   337.173] (II) LoadModule: "shadow"
[   337.173] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   337.173] (II) Module shadow: vendor="X.Org Foundation"
[   337.173] 	compiled for 1.14.4, module version = 1.1.0
[   337.173] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   337.173] (II) Loading sub module "ramdac"
[   337.173] (II) LoadModule: "ramdac"
[   337.173] (II) Module "ramdac" already built-in
[   337.174] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   337.174] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   337.174] (==) NVIDIA(0): RGB weight 888
[   337.174] (==) NVIDIA(0): Default visual is TrueColor
[   337.174] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   337.174] (**) NVIDIA(0): Option "NoLogo" "true"
[   337.174] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[   337.174] (**) NVIDIA(0): Option "UseEDID" "false"
[   337.174] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[   337.174] (**) NVIDIA(0): Enabling 2D acceleration
[   337.174] (**) NVIDIA(0): Ignoring EDIDs
[   337.174] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[   337.174] (**) NVIDIA(0):     mode
[   341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[   341.309] (EE) NVIDIA(0):     check your system's kernel log for additional error
[   341.309] (EE) NVIDIA(0):     messages and refer to Chapter 8: Common Problems in the
[   341.309] (EE) NVIDIA(0):     README for additional information.
[   341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[   341.309] (EE) NVIDIA(0): Failing initialization of X screen 0
[   341.309] (II) UnloadModule: "nvidia"
[   341.309] (II) UnloadSubModule: "shadow"
[   341.309] (II) UnloadSubModule: "wfb"
[   341.309] (II) UnloadSubModule: "fb"
[   341.309] (EE) Screen(s) found, but none have a usable configuration.
[   341.309] (EE) 
Fatal server error:
[   341.309] (EE) no screens found(EE) 
[   341.309] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   341.309] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[   341.309] (EE) 
[   341.309] (EE) Server terminated with error (1). Closing log file.

dmesg |grep bbswitch:

[   13.570577] bbswitch: version 0.7
[   13.570585] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   13.570591] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   13.570687] bbswitch: detected an Optimus _DSM function
[   13.570741] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   13.572354] bbswitch: disabling discrete graphics
[  261.419114] bbswitch: enabling discrete graphics
[  278.445698] bbswitch: disabling discrete graphics
[  279.055257] bbswitch: enabling discrete graphics
[  286.292315] bbswitch: disabling discrete graphics
[  291.911052] bbswitch: enabling discrete graphics
[  310.011289] bbswitch: disabling discrete graphics
[  336.982794] bbswitch: enabling discrete graphics
[  349.526470] bbswitch: enabling discrete graphics

I used "rcutree" option as shown in the post that you put, but I've deleted all changes made to use default configurations, because the solution of the post didn't work sad

Offline

#23 2013-11-04 13:44:47

skualito
Member
Registered: 2008-11-19
Posts: 184

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

surrealistic wrote:

My /var/log/Xorg.8.log:

[   337.161] 
...
[   337.161] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4eb69984-2228-4aba-9863-28a7fa854e51 rw quiet
...

I used "rcutree" option as shown in the post that you put, but I've deleted all changes made to use default configurations, because the solution of the post didn't work sad

What I see is that you boot without the kernel parameter rcutree.rcu_idle_gp_delay=1, are you using grub? if so run grub-mkconfig after appending option to kernel line so grub actually updates the boot command. Or you can also edit the boot command from within grub to test.

Offline

#24 2013-11-04 14:49:12

surrealistic
Member
Registered: 2011-07-24
Posts: 67
Website

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Thank you very much!! big_smile I tried to run glxspheres with optirun and a game with WINE with optirun and work right! big_smile

I followed again the steps of the post and this time it seems to work smile the other time I don't added i915 to MODULES in /etc/mkinitcpio.conf, this time I added it and work now! big_smile

Thank you very much!! I'll try more times to check for problems, but it seems that finally I got it working smile

Thanks!! smile

Offline

#25 2013-11-04 15:14:56

skualito
Member
Registered: 2008-11-19
Posts: 184

Re: [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

Great, if it's solved remember to edit the thread's title to mention it wink

Offline

Board footer

Powered by FluxBB