You are not logged in.
Hi everybody,
so I'm trying to setup a multiseat desktop but I'm completely stuck.
I've followed the wiki for the part regarding xorg.conf and tried to grab from the internet the part for lightdm.conf.
Btw what happens is that the computer starts and give me two login screen on both monitor.
In each of the screen the input devices are correct.
The problem is that I cant access, namely if I put the password the screen becomes black and brings me back to the login screen.
So I've tried to start manually with
X -layout seat{0|1}and the screen becomes black.
So I cannot understand if the problem is in xorg.conf or in lightdm.conf.
Here xorg.conf:
Section "ServerFlags"
#Option "AutoAddDevices" "false"
#Option "AutoEnableDevices" "false"
Option "AllowMouseOpenFail" "on"
#Option "AllowEmptyInput" "on"
#Option "ZapWarning" "on"
#Option "HandleSpecialKeys" "off" # Zapping on
#Option "DRI2" "on"
Option "Xinerama" "false"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "evdev"
Option "Device" "/dev/input/by-id/usb-04d9_2517-event-kbd"
Option "XkbRules" "xorg"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "evdev"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/by-id/usb-04d9_2517-if01-event-mouse"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "evdev"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd"
Option "XkbRules" "xorg"
EndSection
Section "InputDevice"
Identifier "mouse0"
Driver "evdev"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse"
EndSection
Section "Device"
Identifier "nvidia0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 210"
BusId "PCI:01:00:0"
Option "NoLogo" "1"
Option "ProbeAllGpus" "false"
EndSection
Section "Device"
Identifier "nvidia1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 650"
BusId "PCI:06:00:0"
Option "NoLogo" "1"
Option "ProbeAllGpus" "false"
EndSection
Section "Device"
Identifier "nvidia1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 650"
BusId "PCI:06:00:0"
Option "NoLogo" "1"
Option "ProbeAllGpus" "false"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Acer AL1916W"
HorizSync 31.0 - 84.0
VertRefresh 56.0 - 76.0
Option "DPMS" "1"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "DELL U2412M"
HorizSync 30.0 - 83.0
VertRefresh 50.0 - 61.0
Option "DPMS" "1"
EndSection
Section "Screen"
Identifier "Screen1"
Device "nvidia1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "nvidia0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "seat0"
Screen "Screen0" 0 0
InputDevice "mouse0" "CorePointer"
InputDevice "keyboard0" "CoreKeyboard"
Option "AutoAddDevices" "off"
Option "Xinerama" "0"
EndSection
Section "ServerLayout"
Identifier "seat1"
Screen "Screen1" 0 0
InputDevice "mouse1" "CorePointer"
InputDevice "keyboard1" "CoreKeyboard"
Option "AutoAddDevices" "off"
Option "Xinerama" "0"
EndSectionand here's lightdm.conf
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
log-directory=/var/log/lightdm
run-directory=/run/lightdm
#cache-directory=/var/cache/lightdm
#xsessions-directory=/usr/share/xsessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#xgreeters-directory=/usr/share/xgreeters
[SeatDefaults]
#type=xlocal
xserver-command=X
#xserver-layout=
#xserver-config=
#xserver-allow-tcp=false
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
greeter-session=lightdm-gtk-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-guest=true
#guest-session=UNIMPLEMENTED
session-wrapper=/etc/lightdm/xsession
#display-setup-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
#autologin-user=
#autologin-user-timeout=0
#autologin-session=UNIMPLEMENTED
pam-service=lightdm-autologin
#exit-on-failure=false
[Seat:0]
xserver-command=/usr/bin/X
xserver-layout=seat0
[Seat:1]
xserver-command=/usr/bin/X :1 -sharevts
xserver-layout=seat1Thanks to who'll be able to help!
Offline
If your lightdm install is a bit older, this can be related to recent changes in lightdm.
See this:
https://bbs.archlinux.org/viewtopic.php?id=169552
In this case you can overwrite your /etc/lightdm.conf with /etc/lightdm.conf.pacnew, and re-configure it as you wish.
If this was not the case, sorry. (But the symptoms are quite familiar to me)
“The future has already arrived. It's just not evenly distributed yet.”
― William Gibson
Offline
If your lightdm install is a bit older, this can be related to recent changes in lightdm.
See this:
https://bbs.archlinux.org/viewtopic.php?id=169552In this case you can overwrite your /etc/lightdm.conf with /etc/lightdm.conf.pacnew, and re-configure it as you wish.
If this was not the case, sorry. (But the symptoms are quite familiar to me)
Thank you for your answer, that was part of the problem. Now I'm able to login but there's only one monitor working!
Before there were two seats and I wasn't able to login, now there's only one and I'm able to login.
Could it be a problem of the VGAs? Seems strange, I really think that I can't configure well lightdm, but if I want to install gdm it pulls all
gnome-shell, and I use xfce..
What a mess..
Offline
I tried getting it working with xdm but so far it was a no-go. It probably doesn't help my video cards are an nvidia 210 and radeon x300. What cards are you using and which drivers?
D:
Offline
I tried getting it working with xdm but so far it was a no-go. It probably doesn't help my video cards are an nvidia 210 and radeon x300. What cards are you using and which drivers?
Hi!
I'm using two nvidia cards, gt210 and gtx650 ti boost.
With xdm it works great, why it doesn't work for you? What happens?
Offline
Second monitor fails to start. I'm thinking a problem between with nouveau and radeon drivers.
D:
Offline
Second monitor fails to start. I'm thinking a problem between with nouveau and radeon drivers.
Maybe there is. Can't to see what is the log of xorg?
Just for being sure you can try to set up a simple multimonitor environment. I mean one seat two screen and see if it works.
Offline