You are not logged in.
Hi, I'm German and new to the Forum :)
I switched from Debian to Arch yesterday and Installation was okay in general.
I installed the Xserver packages mentioned in the Beginner's Guide description .
Installed enlightenment17 (great that arch has a newer version in the official repos than Debian!) and after putting the
starter command in my .xinitrc it worked and started but the "Alt+F(x)" screen changing is very confused( I suppose it's this runlevel thing but I'm not sure)
Alt+F1-F4 switches between my Enlightenment-Desktops, and F7 also to a Enlightenment Desktop.
Now my ttys are not reachable.
I want my Xserver running on F7 and F1-F6 the different ttys.
I appreciate your help :)
Last edited by halimbo (2013-10-24 08:29:42)
Offline
This has nothing to do with runlevels, they don't exist in systemd anymore, you now get different targets.
Maybe X starts on vt1?
What happens if you press Alt-Ctrl-F2? Alt-Ctrl-F7?
When running X you have to use Alt-Ctrl-F#, not just Alt-F#, to go to tty.
Last edited by karol (2013-10-23 15:04:34)
Offline
Okay, thats why I got no clue, I'm totally new to the Sytemd thing :D
Yes i forgot to add Ctrl, but i knew that.
When i press Alt+Ctrl+F2 i get a black screen...
Last edited by halimbo (2013-10-23 15:31:56)
Offline
Yes i suppose X starts on vt1
how can I change this?
Offline
Alt+Ctrl+F7 gives me a black screen too.
When i start X i get some shitty pixels and red hieroglyphs for about a second, don't know if that has anything to do with it
Offline
What's the output of
ps -C X -o args=Offline
When i quit enlightenment i've got some green pixels on vt1 and all other vt's are black and i have to force poweroff because nothing responds...
Offline
the output is:
X :0
while running X
Offline
so after some experiments and googling:
X starts on the vt from which I call it.
It then blocks all other vts and spams some pixel rubbish on them.
( if I call X from vt6 then X starts on 6. Then after Alt+Strg+F1 it shows me green pixels and with Alt+Strg+F2 it shows me white pixels...)
Offline
Sounds like a video card and/or driver issue. Provide some relevant details.
Offline
I don't think it's a driver issue because x and enlightenment works perfect until i quit the x server.
but thats just me, please define relevant details so i know what could be important information
Its an Intel Grpahic card, i installed the mesa and intel driver. Unfortunately i dont know how to switch between them so i could test which works bettere
okay google helped, i will now try the other driver
Last edited by halimbo (2013-10-23 16:31:08)
Offline
the output is:
X :0while running X
That's weird, I get
$ ps -C X -o args=
/usr/bin/X -nolisten tcp :0 -auth /tmp/serverauth.G4T5E0VGIx vt1'vt1' means I'm running on the first tty, the one I started X on. I start X with 'startx' and I'm using just dwm, so my setup it a bit different from yours.
Last edited by karol (2013-10-23 16:37:13)
Offline
now as root in xserver i get a similar output
Offline
could nomodeset have something to do with it? ![]()
Offline
could nomodeset have something to do with it?
Yes.
Please don't bump this thread. Edit your posts instead.
Last edited by karol (2013-10-23 16:43:22)
Offline
okay sorry.
now as normal user i get this similar output from ps, too.
should i install the uvesafb driver for the console?
thats what i did with debian because my laptop screen only works with nomodeset.
but with arch the reolution was okay in console without any changing so i did not instalk the uvesafb driver.
edit: Quoting from the archwiki page of uvesafb: "Warning disabling KMS may break X"
what should i do now?
Last edited by halimbo (2013-10-23 16:56:56)
Offline
https://bbs.archlinux.org/viewtopic.php … 3#p1340653
What exactly is your hardware?
Last edited by karol (2013-10-23 16:58:57)
Offline
yes i suppose X starts on vt1..
how can i change this...
and why is this set as default?!?
If you were wondering what happened to your post, you hit the 'report' function, not the 'reply' function. The post turned into a report to the moderators. It happens ![]()
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
0:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
02:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
02:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
02:06.4 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller
02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
08:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Offline
You don't need uvesafb, install just the intel driver.
What's the output of
pacman -Q linux
pacman -Qqs ^xf86-videoBTW, when posting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
like thisIt makes the code more readable and - in case of longer listings - more convenient to scroll through.
Last edited by karol (2013-10-23 17:10:34)
Offline
pacman -Q linux:
linux 3.11.6-1pacman -Qqs ^xf86-video:
xf86-video-intel
xf86-video-vesaOffline
What's the kernel commandline of your bootlader?
Anything interesting in the logs?
Its an Intel Grpahic card, i installed the mesa and intel driver. Unfortunately i dont know how to switch between them so i could test which works bettere
okay google helped, i will now try the other driver
What exactly did you do here?
Offline
Kernel-Command-Line:
"nomodeset" and currently "i915.modeset=0".
Driver-Switching:
i did not find the configuration file to switch the driver and was not able to do it...
Logs:
Which logs?
Last edited by halimbo (2013-10-23 17:42:01)
Offline
What happens if you remove both i915.modeset=0 and nomodeset?
What driver do you want to switch to? Intel is the correct driver.
Offline
The screen goes black while booting Arch (Debian too)
Okay, so how can I check that the Intel driver is loaded an not the Vesa driver?
Offline