You are not logged in.
- Topics: Active | Unanswered
#1 2013-10-27 08:49:36
- Silenzium
- Member
- From: Germany
- Registered: 2011-05-03
- Posts: 32
[solved]Laptop battery stays at 0% and doesn't charge (but 99% in Win)
Hi there,
I've a problem with my ThinkPad T410. Since one of the last pacman updates KDE shows permanently 0% battery status and the values does not increase any more. If I boot into Windows 7, however, the battery status is at 99%, So I assume that it's a ACPI problem.
Here's some console output:
# upower --monitor-detail
Monitoring activity from the power daemon. Press Ctrl+C to cancel.
[09:29:05.352] device changed: /org/freedesktop/UPower/devices/battery_BAT0
native-path: BAT0
vendor: LGC
model: 42T4912
power supply: yes
updated: So 27 Okt 2013 09:29:05 CET (0 seconds ago)
has history: yes
has statistics: yes
battery
present: yes
rechargeable: yes
state: fully-charged
energy: 85,2147 Wh
energy-empty: 0 Wh
energy-full: 85,2147 Wh
energy-full-design: 84,2934 Wh
energy-rate: 10,0455 W
voltage: 12,863 V
percentage: 0%
capacity: 89,2678%
technology: lithium-ion
History (charge):
1382865545 0,000 unknown
History (rate):
1382862538 10,046 unknown
1382862736 10,340 charging
1382865545 0,000 unknown# grep . /sys/class/power_supply/BAT0/*
/sys/class/power_supply/BAT0/alarm:376000
/sys/class/power_supply/BAT0/capacity:113
/sys/class/power_supply/BAT0/charge_full:6779000
/sys/class/power_supply/BAT0/charge_full_design:7594000
/sys/class/power_supply/BAT0/charge_now:7691000
/sys/class/power_supply/BAT0/current_now:897000
/sys/class/power_supply/BAT0/cycle_count:0
/sys/class/power_supply/BAT0/manufacturer:LGC
/sys/class/power_supply/BAT0/model_name:42T4912
/sys/class/power_supply/BAT0/present:1
/sys/class/power_supply/BAT0/status:Charging
/sys/class/power_supply/BAT0/technology:Li-ion
/sys/class/power_supply/BAT0/type:Battery
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_NAME=BAT0
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_STATUS=Charging
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_PRESENT=1
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_TECHNOLOGY=Li-ion
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_CYCLE_COUNT=0
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_VOLTAGE_MIN_DESIGN=11100000
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_VOLTAGE_NOW=12638000
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_CURRENT_NOW=897000
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_CHARGE_FULL_DESIGN=7594000
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_CHARGE_FULL=6779000
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_CHARGE_NOW=7691000
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_CAPACITY=113
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_MODEL_NAME=42T4912
/sys/class/power_supply/BAT0/uevent:POWER_SUPPLY_MANUFACTURER=LGC
/sys/class/power_supply/BAT0/voltage_min_design:11100000
/sys/class/power_supply/BAT0/voltage_now:12638000# acpi -i
Battery 0: Charging, 100%, charging at zero rate - will never fully charge.
Battery 0: design capacity 7594 mAh, last full capacity 6779 mAh = 89%# dmesg | grep -i acpi
[ 0.000000] BIOS-e820: [mem 0x00000000bf371000-0x00000000bf3f1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf668000-0x00000000bf6e7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf76b000-0x00000000bf776fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf777000-0x00000000bf779fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf77a000-0x00000000bf780fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf781000-0x00000000bf781fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf782000-0x00000000bf78afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf78b000-0x00000000bf78bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf78c000-0x00000000bf79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7fefff] ACPI data
[ 0.000000] ACPI: RSDP 00000000000f6870 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bf7ef118 0009C (v01 LENOVO TP-6I 00001410 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf7ef200 000F4 (v04 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bf7ef5d1 0F518 (v01 LENOVO TP-6I 00001410 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bf6e7000 00040
[ 0.000000] ACPI: SSDT 00000000bf7ef3b4 0021D (v01 LENOVO TP-6I 00001410 MSFT 03000001)
[ 0.000000] ACPI: ECDT 00000000bf7feae9 00052 (v01 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bf7feb3b 00084 (v01 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bf7febf7 0003C (v01 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bf7fec33 00038 (v01 LENOVO TP-6I 00001410 LNVO 00000001)
[ 0.000000] ACPI: ASF! 00000000bf7fedbe 000A4 (v16 LENOVO TP-6I 00001410 PTL 00000001)
[ 0.000000] ACPI: SLIC 00000000bf7fee62 00176 (v01 LENOVO TP-6I 00001410 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf7fefd8 00028 (v01 LENOVO TP-6I 00001410 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6e591a 0084B (v01 LENOVO TP-6I 00001410 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bf78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 00000000bf781000 00080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bf779000 009F1 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf778000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf777000 0049F (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.002739] ACPI: Core revision 20130517
[ 0.009059] ACPI: All ACPI Tables successfully acquired
[ 0.248089] PM: Registering ACPI NVS region [mem 0xbf371000-0xbf3f1fff] (528384 bytes)
[ 0.248097] PM: Registering ACPI NVS region [mem 0xbf668000-0xbf6e7fff] (524288 bytes)
[ 0.248104] PM: Registering ACPI NVS region [mem 0xbf76b000-0xbf776fff] (49152 bytes)
[ 0.248105] PM: Registering ACPI NVS region [mem 0xbf77a000-0xbf780fff] (28672 bytes)
[ 0.248106] PM: Registering ACPI NVS region [mem 0xbf782000-0xbf78afff] (36864 bytes)
[ 0.248108] PM: Registering ACPI NVS region [mem 0xbf78c000-0xbf79efff] (77824 bytes)
[ 0.249011] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.249013] ACPI: bus type PCI registered
[ 0.249015] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.277761] ACPI: Added _OSI(Module Device)
[ 0.277763] ACPI: Added _OSI(Processor Device)
[ 0.277764] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.277765] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.278940] ACPI: EC: EC description table is found, configuring boot EC
[ 0.282430] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.376814] ACPI: SSDT 00000000bf71a598 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.377094] ACPI: Dynamic OEM Table Load:
[ 0.377096] ACPI: SSDT (null) 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.377180] ACPI: SSDT 00000000bf718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.377469] ACPI: Dynamic OEM Table Load:
[ 0.377470] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.394916] ACPI: SSDT 00000000bf719a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.395231] ACPI: Dynamic OEM Table Load:
[ 0.395233] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.411468] ACPI: SSDT 00000000bf717d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.411757] ACPI: Dynamic OEM Table Load:
[ 0.411759] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.422843] ACPI: Interpreter enabled
[ 0.422848] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.422851] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.422862] ACPI: (supports S0 S3 S4 S5)
[ 0.422864] ACPI: Using IOAPIC for interrupt routing
[ 0.422885] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.423622] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.430927] ACPI: Power Resource [PUBS] (on)
[ 0.435340] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.435412] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.435468] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.435539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.435608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.435678] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.435733] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.435803] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.435835] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.435839] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.435841] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.436102] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.436239] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.436369] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.436371] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.437007] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.437211] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.437403] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.437570] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.437738] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.437906] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.438078] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.438287] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.448166] acpiphp: Slot [1] registered
[ 0.459457] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.459467] ACPI: \_SB_.UNCR: notify handler is installed
[ 0.459470] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.459502] Found 2 acpi root devices
[ 0.459553] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.459673] PCI: Using ACPI for IRQ routing
[ 0.475330] pnp: PnP ACPI init
[ 0.475346] ACPI: bus type PNP registered
[ 0.476245] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.476567] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.476605] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.476625] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.476644] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.476672] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.476695] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.476717] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.476741] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.477009] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.477650] pnp: PnP ACPI: found 10 devices
[ 0.477652] ACPI: bus type PNP unregistered
[ 0.824870] ACPI: bus type USB registered
[ 0.832970] ACPI: bus type ATA registered
[ 1.193065] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.193071] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.193074] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.236211] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.236217] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.236221] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.561353] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.562245] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.567624] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.568388] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 8.018493] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 8.018498] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 8.018501] thinkpad_acpi: ThinkPad BIOS 6IET81WW (1.41 ), EC 6IHT43WW-1.18
[ 8.018503] thinkpad_acpi: Lenovo ThinkPad T410, model 2522W2A
[ 8.019275] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 8.019539] thinkpad_acpi: radio switch found; radios are enabled
[ 8.019680] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 8.019681] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 8.022243] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 8.026351] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 8.026520] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 8.027451] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input3
[ 8.103073] ACPI: Requesting acpi_cpufreq
[ 9.931410] ACPI: Lid Switch [LID]
[ 9.931478] ACPI: Sleep Button [SLPB]
[ 9.931549] ACPI: Power Button [PWRF]
[ 9.974697] acpi device:0c: registered as cooling_device4
[ 9.974821] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[ 10.039423] ACPI: Thermal Zone [THM0] (48 C)
[ 10.062800] ACPI: Battery Slot [BAT0] (battery present)
[ 10.121599] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130517/utaddress-251)
[ 10.121604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.121607] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
[ 10.121609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.121611] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
[ 10.121613] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.121614] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
[ 10.121616] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.146568] ACPI: AC Adapter [AC] (on-line)
[ 26.229871] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 26.230005] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 26.230136] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 26.230242] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 26.230346] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 26.230449] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 26.231139] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 26.231181] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 26.388089] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)Any ideas?
Last edited by Silenzium (2013-10-31 11:02:40)
Offline
#2 2013-10-29 15:26:43
- mcloaked
- Member
- From: Yorkshire, UK
- Registered: 2012-02-02
- Posts: 1,238
Re: [solved]Laptop battery stays at 0% and doesn't charge (but 99% in Win)
I had a very similar problem and it turned out that it was a problem where upower was incorrectly reporting the battery level when it was overfull - this has now been fixed in upower version 0.9.23-2 which was released to the repos yesterday. If you update you will likely find the issue is resolved?
Mike C
Offline
#3 2013-10-31 10:52:38
- Silenzium
- Member
- From: Germany
- Registered: 2011-05-03
- Posts: 32
Re: [solved]Laptop battery stays at 0% and doesn't charge (but 99% in Win)
It's solved, but not by upgrading upower (although it might be the cause because I updated that package some days ago). I don't know which package solved it, but it has to be one of these:
[2013-10-27 10:07] [PACMAN] Running 'pacman --color auto -Sy'
[2013-10-27 10:07] [PACMAN] synchronizing package lists
[2013-10-27 10:07] [PACMAN] starting full system upgrade
[2013-10-27 10:07] [PACMAN] Running 'pacman --color auto -S -u'
[2013-10-27 10:07] [PACMAN] starting full system upgrade
[2013-10-27 10:09] [PACMAN] upgraded ucommon (6.0.7-1 -> 6.0.7-2)
[2013-10-27 10:09] [PACMAN] upgraded ccrtp (2.0.5-1 -> 2.0.6-1)
[2013-10-27 10:09] [PACMAN] upgraded e2fsprogs (1.42.8-1 -> 1.42.8-2)
[2013-10-27 10:09] [PACMAN] upgraded handbrake (0.9.9-3 -> 0.9.9-4)
[2013-10-27 10:09] [PACMAN] upgraded libevent (2.0.21-2 -> 2.0.21-3)
[2013-10-27 10:09] [PACMAN] upgraded libimobiledevice (1.1.5-1 -> 1.1.5-2)
[2013-10-27 10:09] [PACMAN] upgraded liblrdf (0.5.0-1 -> 0.5.0-2)
[2013-10-27 10:09] [PACMAN] upgraded recode (3.6-7 -> 3.6-8)
[2013-10-27 10:10] [PACMAN] upgraded shared-mime-info (1.1-1 -> 1.2-1)
[2013-10-27 10:10] [PACMAN] upgraded spandsp (0.0.6pre21-1 -> 0.0.6pre21-2)
[2013-10-27 10:10] [PACMAN] upgraded speech-dispatcher (0.8-1 -> 0.8-2)
[2013-10-27 10:10] [PACMAN] upgraded vigra (1.9.0-6 -> 1.9.0-7)
[2013-10-27 10:10] [PACMAN] upgraded wavpack (4.60.1-2 -> 4.70.0-1)
[2013-10-27 10:10] [PACMAN] upgraded wine (1.7.4-1 -> 1.7.5-1)
[2013-10-27 10:10] [PACMAN] upgraded zziplib (0.13.62-1 -> 0.13.62-2)Offline
#4 2013-10-31 17:50:00
- mcloaked
- Member
- From: Yorkshire, UK
- Registered: 2012-02-02
- Posts: 1,238
Re: [solved]Laptop battery stays at 0% and doesn't charge (but 99% in Win)
Silenzium wrote:
It's solved, but not by upgrading upower (although it might be the cause because I updated that package some days ago). I don't know which package solved it, but it has to be one of these:
There were two upower updates - one was 0.9.23-1 and the one that really fixed it was 0.9.23-2
Mike C
Offline
#5 2013-11-01 09:41:08
- Silenzium
- Member
- From: Germany
- Registered: 2011-05-03
- Posts: 32
Re: [solved]Laptop battery stays at 0% and doesn't charge (but 99% in Win)
Yes, but I didn't install that one:
#tail -n 1000 /var/log/pacman.log | grep upower
[2013-10-20 22:10] [PACMAN] upgraded upower (0.9.20-2 -> 0.9.22-1)
[2013-10-31 12:23] [PACMAN] upgraded upower (0.9.22-1 -> 0.9.23-2)Nice side effect of the upower upgrade: Resume in KDE, which was broken for some months, works again.
Thanks for your help.
Offline