You are not logged in.

#1 2012-12-04 20:58:15

yodaz
Member
Registered: 2011-03-08
Posts: 41

Openchrome and 3D accel

Hi,

I have an old laptop with a via KM400 graphics chipset, and I wonder if I can had 3D acceleration with openchrome driver ?

I have tried both xf86-video-openchrome and xf86-video-openchrome-git with Arch lts kernel, and I still have the following message in Xorg.0.log :

[  1714.481] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory

I think I have forgotten some module, but I can't figure which one is missing. What am I doing wrong ?

Here's lspci ouput :

00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:07.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
00:08.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] (rev 01)
02:00.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Wireless Network Adapter (rev 01)

the full Xorg log :

[  1714.307] 
X.Org X Server 1.13.0
Release Date: 2012-09-05
[  1714.307] X Protocol Version 11, Revision 0
[  1714.307] Build Operating System: Linux 3.6.3-1-ARCH i686 
[  1714.307] Current Operating System: Linux totoro 3.0.53-1-lts #1 SMP Tue Nov 27 08:27:26 CET 2012 i686
[  1714.307] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=d92d476d-ee8a-4155-b644-7aaacfae36b5 ro nomodeset quiet
[  1714.307] Build Date: 08 November 2012  07:12:52PM
[  1714.307]  
[  1714.307] Current version of pixman: 0.28.0
[  1714.307] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1714.307] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1714.308] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  4 21:45:26 2012
[  1714.308] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1714.309] (==) No Layout section.  Using the first Screen section.
[  1714.309] (==) No screen section available. Using defaults.
[  1714.309] (**) |-->Screen "Default Screen Section" (0)
[  1714.309] (**) |   |-->Monitor "<default monitor>"
[  1714.310] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  1714.310] (**) |   |-->Device "ViaKm400"
[  1714.310] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1714.310] (==) Automatically adding devices
[  1714.310] (==) Automatically enabling devices
[  1714.310] (==) Automatically adding GPU devices
[  1714.310] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[  1714.310] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1714.310] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1714.310] (II) Loader magic: 0x825a640
[  1714.310] (II) Module ABI versions:
[  1714.310] 	X.Org ANSI C Emulation: 0.4
[  1714.310] 	X.Org Video Driver: 13.1
[  1714.310] 	X.Org XInput driver : 18.0
[  1714.310] 	X.Org Server Extension : 7.0
[  1714.313] (--) PCI:*(0:1:0:0) 1106:7205:1025:0033 rev 1, Mem @ 0xf0000000/67108864, 0xd1000000/16777216
[  1714.313] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1714.313] Initializing built-in extension Generic Event Extension
[  1714.314] Initializing built-in extension SHAPE
[  1714.314] Initializing built-in extension MIT-SHM
[  1714.314] Initializing built-in extension XInputExtension
[  1714.314] Initializing built-in extension XTEST
[  1714.314] Initializing built-in extension BIG-REQUESTS
[  1714.314] Initializing built-in extension SYNC
[  1714.314] Initializing built-in extension XKEYBOARD
[  1714.314] Initializing built-in extension XC-MISC
[  1714.314] Initializing built-in extension SECURITY
[  1714.314] Initializing built-in extension XINERAMA
[  1714.314] Initializing built-in extension XFIXES
[  1714.314] Initializing built-in extension RENDER
[  1714.314] Initializing built-in extension RANDR
[  1714.314] Initializing built-in extension COMPOSITE
[  1714.314] Initializing built-in extension DAMAGE
[  1714.314] Initializing built-in extension MIT-SCREEN-SAVER
[  1714.314] Initializing built-in extension DOUBLE-BUFFER
[  1714.314] Initializing built-in extension RECORD
[  1714.314] Initializing built-in extension DPMS
[  1714.314] Initializing built-in extension X-Resource
[  1714.314] Initializing built-in extension XVideo
[  1714.314] Initializing built-in extension XVideo-MotionCompensation
[  1714.314] Initializing built-in extension XFree86-VidModeExtension
[  1714.314] Initializing built-in extension XFree86-DGA
[  1714.314] Initializing built-in extension XFree86-DRI
[  1714.315] Initializing built-in extension DRI2
[  1714.315] (II) LoadModule: "glx"
[  1714.315] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1714.316] (II) Module glx: vendor="X.Org Foundation"
[  1714.316] 	compiled for 1.13.0, module version = 1.0.0
[  1714.316] 	ABI class: X.Org Server Extension, version 7.0
[  1714.316] (==) AIGLX enabled
[  1714.316] Loading extension GLX
[  1714.316] (II) LoadModule: "openchrome"
[  1714.317] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[  1714.317] (II) Module openchrome: vendor="http://openchrome.org/"
[  1714.317] 	compiled for 1.13.0, module version = 0.3.1
[  1714.317] 	Module class: X.Org Video Driver
[  1714.317] 	ABI class: X.Org Video Driver, version 13.1
[  1714.317] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
	K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
	CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
	VX855/VX875, VX900
[  1714.318] (++) using VT number 7

[  1714.365] (!!) VIA Technologies does not support this driver in any way.
[  1714.365] (!!) For support, please refer to http://www.openchrome.org/.
[  1714.365] (!!) (development build, branch master at revision fe5ef97)
[  1714.366] (II) CHROME(0): VIAPreInit
[  1714.366] (II) CHROME(0): VIAGetRec
[  1714.366] (--) CHROME(0): Chipset: KM400/KN400
[  1714.366] (--) CHROME(0): Chipset revision: 0
[  1714.481] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[  1714.481] (II) Loading sub module "vgahw"
[  1714.481] (II) LoadModule: "vgahw"
[  1714.482] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  1714.482] (II) Module vgahw: vendor="X.Org Foundation"
[  1714.482] 	compiled for 1.13.0, module version = 0.1.0
[  1714.482] 	ABI class: X.Org Video Driver, version 13.1
[  1714.482] (--) CHROME(0): Probed amount of VideoRAM = 32768 kB
[  1714.482] (II) CHROME(0): VIAMapMMIO
[  1714.482] (--) CHROME(0): mapping MMIO @ 0xd1000000 with size 0xd000
[  1714.483] (--) CHROME(0): mapping BitBlt MMIO @ 0xd1200000 with size 0x200000
[  1714.483] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[  1714.483] (II) CHROME(0): VIAMapFB
[  1714.484] (--) CHROME(0): mapping framebuffer @ 0xf0000000 with size 0x2000000
[  1714.494] (--) CHROME(0): Frame buffer start: 0xb4ffd000, free start: 0x0 end: 0x2000000
[  1714.494] (II) CHROME(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1714.494] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[  1714.494] (==) CHROME(0): RGB weight 888
[  1714.494] (==) CHROME(0): Default visual is TrueColor
[  1714.494] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[  1714.494] (**) CHROME(0): Option "AccelMethod" "EXA"
[  1714.494] (**) CHROME(0): Option "EnableAGPDMA" "false"
[  1714.494] (==) CHROME(0): Shadow framebuffer is disabled.
[  1714.494] (==) CHROME(0): Hardware acceleration is enabled.
[  1714.494] (**) CHROME(0): Using EXA acceleration architecture.
[  1714.494] (==) CHROME(0): EXA composite acceleration enabled.
[  1714.494] (==) CHROME(0): EXA scratch area size is 4096 kB.
[  1714.494] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[  1714.494] (==) CHROME(0): GPU virtual command queue will be enabled.
[  1714.494] (==) CHROME(0): DRI IRQ will be disabled if DRI is enabled.
[  1714.494] (**) CHROME(0): AGP DMA will be disabled if DRI is enabled.
[  1714.494] (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is enabled.
[  1714.495] (==) CHROME(0): Will not enable VBE modes.
[  1714.495] (==) CHROME(0): VBE VGA register save & restore will not be used
	if VBE modes are enabled.
[  1714.495] (==) CHROME(0): Xv Bandwidth check is enabled.
[  1714.495] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[  1714.495] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[  1714.495] (==) CHROME(0): TV dotCrawl is disabled.
[  1714.495] (==) CHROME(0): TV deflicker is set to 0.
[  1714.495] (==) CHROME(0): No default TV type is set.
[  1714.495] (==) CHROME(0): No default TV output signal type is set.
[  1714.495] (==) CHROME(0): No default TV output port is set.
[  1714.495] (==) CHROME(0): Will not print VGA registers.
[  1714.495] (==) CHROME(0): Will not scan I2C buses.
[  1714.495] (II) CHROME(0): ...Finished parsing config file options.
[  1714.495] (--) CHROME(0): Detected Acer Aspire 135x. Card-Ids (1025|  33)
[  1714.495] (II) CHROME(0): Detected MemClk 4
[  1714.495] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 4
[  1714.495] (II) CHROME(0): Detected TV standard: PAL.
[  1714.495] (II) Loading sub module "ramdac"
[  1714.495] (II) LoadModule: "ramdac"
[  1714.495] (II) Module "ramdac" already built-in
[  1714.495] (II) Loading sub module "i2c"
[  1714.495] (II) LoadModule: "i2c"
[  1714.495] (II) Module "i2c" already built-in
[  1714.495] (II) CHROME(0): ViaI2CInit
[  1714.495] (II) CHROME(0): ViaI2CBus1Init
[  1714.495] (II) CHROME(0): I2C bus "I2C bus 1" initialized.
[  1714.496] (II) CHROME(0): ViaI2cBus2Init
[  1714.496] (II) CHROME(0): I2C bus "I2C bus 2" initialized.
[  1714.496] (II) CHROME(0): ViaI2CBus3Init
[  1714.496] (II) CHROME(0): I2C bus "I2C bus 3" initialized.
[  1714.496] (II) Loading sub module "ddc"
[  1714.496] (II) LoadModule: "ddc"
[  1714.496] (II) Module "ddc" already built-in
[  1714.496] (II) CHROME(0): ViaOutputsDetect
[  1714.496] (==) CHROME(0): LVDS-0 : Digital output bus width is 12 bits.
[  1714.496] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
[  1714.496] (==) CHROME(0): LVDS Panel will not be forced.
[  1714.496] (==) CHROME(0): Panel size is not selected from config file.
[  1714.496] (II) CHROME(0): Enabling panel from PCI-subsystem ID information.
[  1714.496] (II) CHROME(0): Output LVDS-1 has no monitor section
[  1714.496] (II) CHROME(0): Output VGA-1 has no monitor section
[  1714.498] (II) CHROME(0): ViaCH7xxxDetect
[  1714.498] (II) CHROME(0): I2C device "I2C bus 3:CH7xxx" registered at address 0xEA.
[  1714.500] (--) CHROME(0): Detected Chrontel CH7019B LVDS Transmitter/TV Encoder
[  1714.501] (II) CHROME(0): ViaCH7xxxInit
[  1714.501] (II) CHROME(0): CH7xxxSave
[  1714.662] (II) CHROME(0): Output TV-1 has no monitor section
[  1714.662] (II) CHROME(0): CH7xxxSave
[  1714.823] (II) CHROME(0): VIAGetPanelSizeFromDDCv1
[  1714.823] (II) CHROME(0): I2C device "I2C bus 2:ddc2" registered at address 0xA0.
[  1714.876] (II) CHROME(0): EDID for output LVDS-1
[  1714.876] (II) CHROME(0): Manufacturer: AUO  Model: f06  Serial#: 23894
[  1714.876] (II) CHROME(0): Year: 2004  Week: 11
[  1714.876] (II) CHROME(0): EDID Version: 1.2
[  1714.876] (II) CHROME(0): Digital Display Input
[  1714.876] (II) CHROME(0): Max Image Size [cm]: horiz.: 30  vert.: 23
[  1714.876] (II) CHROME(0): Gamma: 2.20
[  1714.876] (II) CHROME(0): No DPMS capabilities specified
[  1714.876] (II) CHROME(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1714.876] (II) CHROME(0): First detailed timing is preferred mode
[  1714.876] (II) CHROME(0): redX: 0.566 redY: 0.321   greenX: 0.320 greenY: 0.537
[  1714.877] (II) CHROME(0): blueX: 0.155 blueY: 0.143   whiteX: 0.313 whiteY: 0.329
[  1714.877] (II) CHROME(0): Manufacturer's mask: 0
[  1714.877] (II) CHROME(0): Supported detailed timing:
[  1714.877] (II) CHROME(0): clock: 65.0 MHz   Image Size:  304 x 230 mm
[  1714.877] (II) CHROME(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[  1714.877] (II) CHROME(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[  1714.877] (II) CHROME(0): Unknown vendor-specific block f
[  1714.877] (II) CHROME(0):  AUO
[  1714.877] (II) CHROME(0):  B150XG01V2
[  1714.877] (II) CHROME(0): EDID (in hex):
[  1714.877] (II) CHROME(0): 	00ffffffffffff0006af060f565d0000
[  1714.877] (II) CHROME(0): 	0b0e0102801e17780a12e59152528927
[  1714.877] (II) CHROME(0): 	24505400000001010101010101010101
[  1714.877] (II) CHROME(0): 	01010101010164190040410026301888
[  1714.877] (II) CHROME(0): 	360030e6100000180000000f00067708
[  1714.877] (II) CHROME(0): 	ff010f052e2dff053f01000000fe0041
[  1714.877] (II) CHROME(0): 	554f0a202020202020202020000000fe
[  1714.877] (II) CHROME(0): 	00423135305847303156320a2020001e
[  1714.877] (II) CHROME(0): EDID vendor "AUO", prod id 3846
[  1714.877] (II) CHROME(0): Printing DDC gathered Modelines:
[  1714.877] (II) CHROME(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[  1714.878] (II) CHROME(0): VIAGetPanelSizeFromEDID
[  1714.878] (II) CHROME(0): VIAGetPanelSizeFromDDCv1: (1024x768)
[  1714.878] (II) CHROME(0): ViaPanelLookUpModeIndex, Width 1024, Height 768, NativeModeIndex2
[  1714.878] (II) CHROME(0): NativeMode: 1024 768
[  1714.878] (II) CHROME(0): EDID vendor "AUO", prod id 3846
[  1714.878] (II) CHROME(0): ViaComputeDotClock 65000 : 0d3b : 866d
[  1714.878] (II) CHROME(0): Printing probed modes for output LVDS-1
[  1714.878] (II) CHROME(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[  1714.878] (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
[  1714.885] (--) CHROME(0): Test for CRT with VSYNC
[  1714.886] (II) CHROME(0): EDID for output VGA-1
[  1714.886] (II) CHROME(0): CH7xxxDACDetect
[  1714.894] (--) CHROME(0): CH7xxx: Nothing connected.
[  1714.894] (II) CHROME(0): EDID for output TV-1
[  1714.894] (II) CHROME(0): Output LVDS-1 connected
[  1714.894] (II) CHROME(0): Output VGA-1 disconnected
[  1714.894] (II) CHROME(0): Output TV-1 disconnected
[  1714.894] (II) CHROME(0): Using exact sizes for initial modes
[  1714.894] (II) CHROME(0): Output LVDS-1 using initial mode 1024x768
[  1714.894] (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1714.894] (**) CHROME(0): Display dimensions: (300, 230) mm
[  1714.894] (**) CHROME(0): DPI set to (86, 84)
[  1714.894] (II) Loading sub module "fb"
[  1714.894] (II) LoadModule: "fb"
[  1714.894] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1714.895] (II) Module fb: vendor="X.Org Foundation"
[  1714.895] 	compiled for 1.13.0, module version = 1.0.0
[  1714.895] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1714.895] (II) Loading sub module "exa"
[  1714.895] (II) LoadModule: "exa"
[  1714.896] (II) Loading /usr/lib/xorg/modules/libexa.so
[  1714.896] (II) Module exa: vendor="X.Org Foundation"
[  1714.896] 	compiled for 1.13.0, module version = 2.6.0
[  1714.896] 	ABI class: X.Org Video Driver, version 13.1
[  1714.896] (--) Depth 24 pixmap format is 32 bpp
[  1714.896] (II) CHROME(0): VIAScreenInit
[  1714.896] (II) CHROME(0): Frame Buffer From (0,0) To (1024,8192)
[  1714.896] (II) CHROME(0): Using 7424 lines for offscreen memory.
[  1714.896] 3145728 bytes of Linear memory allocated at 300000, handle 158182288
[  1714.896] 262144 bytes of Linear memory allocated at 600000, handle 158182416
[  1714.897] 32 bytes of Linear memory allocated at 640000, handle 158182544
[  1714.897] 32 bytes of Linear memory allocated at 640080, handle 158182672
[  1714.897] (II) CHROME(0): - Visuals set up
[  1714.897] (II) CHROME(0): - B & W
[  1714.897] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
[  1714.897] (II) EXA(0): Offscreen pixmap area of 30408704 bytes
[  1714.897] (II) EXA(0): Driver registered support for the following operations:
[  1714.897] (II)         Solid
[  1714.897] (II)         Copy
[  1714.897] (II)         Composite (RENDER acceleration)
[  1714.897] (II) CHROME(0): [EXA] Enabled EXA acceleration.
[  1714.897] (==) CHROME(0): Backing store disabled
[  1714.897] (II) CHROME(0): - Backing store set up
[  1714.897] (II) CHROME(0): - SW cursor set up
[  1714.898] 256 bytes of Linear memory allocated at 640100, handle 158203176
[  1714.898] 256 bytes of Linear memory allocated at 640200, handle 158182760
[  1714.898] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1714.898] (II) CHROME(0): - Def Color map set up
[  1714.898] (II) CHROME(0): - Palette loaded
[  1714.898] (II) CHROME(0): - Color maps etc. set up
[  1714.898] (==) CHROME(0): DPMS enabled
[  1714.898] (II) CHROME(0): - DPMS set up
[  1714.898] (II) CHROME(0): VIAEnterVT
[  1714.898] (II) CHROME(0): VIASave
[  1714.898] (II) CHROME(0): Primary
[  1714.900] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[  1714.900] (II) CHROME(0): Crtc...
[  1714.900] (II) CHROME(0): TVSave...
[  1714.900] (II) CHROME(0): CH7xxxSave
[  1715.061] (II) CHROME(0): VIASave
[  1715.061] (II) CHROME(0): Primary
[  1715.061] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[  1715.062] (II) CHROME(0): Crtc...
[  1715.062] (II) CHROME(0): TVSave...
[  1715.062] (II) CHROME(0): CH7xxxSave
[  1715.223] (II) CHROME(0): CH7xxxSave
[  1715.385] (II) CHROME(0): ViaLCDPower: Off.
[  1715.385] (II) CHROME(0): CH7xxxLCDPower: Off
[  1715.390] (II) CHROME(0): ViaDisplayDisableCRT
[  1715.390] (II) CHROME(0): ViaTVPower: Off.
[  1715.390] (II) CHROME(0): CH7xxxTVPower: Off
[  1715.392] (II) CHROME(0): ViaSecondCRTCModeValid
[  1715.392] (II) CHROME(0): ViaLCDPower: Off.
[  1715.392] (II) CHROME(0): CH7xxxLCDPower: Off
[  1715.397] (II) CHROME(0): ViaModeSecondCRTC
[  1715.397] (II) CHROME(0): mode: 0x96e7db8
[  1715.397] (II) CHROME(0): mode->name: 0x96e7ec0
[  1715.397] (II) CHROME(0): mode->name: 1024x768
[  1715.397] (II) CHROME(0): ViaSecondCRTCSetMode
[  1715.397] (II) CHROME(0): Setting up 1024x768
[  1715.397] (II) CHROME(0): ViaSetSecondaryFIFO
[  1715.398] (II) CHROME(0): ViaComputeDotClock 65000 : 0d3b : 866d
[  1715.398] (II) CHROME(0): ViaSetDotclock to 0x00866d
[  1715.398] (II) CHROME(0): ViaSetUseExternalClock
[  1715.398] (II) CHROME(0): ViaSecondDisplayChannelEnable
[  1715.398] (II) CHROME(0): ViaDisplayDisableSimultaneous
[  1715.398] (II) CHROME(0): VIALoadRgbLut
[  1715.398] (II) CHROME(0): ViaLCDPower: On.
[  1715.398] (II) CHROME(0): CH7xxxLCDPower: On
[  1715.402] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = 4B!
[  1715.403] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = B!
[  1715.404] (--) CHROME(0): CH7xxxLCDPower: [1]CH7019 PLL lock fail!
[  1715.404] (--) CHROME(0): CH7xxxLCDPower: [1]0x66 = 24!
[  1715.406] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = 4B!
[  1715.407] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = B!
[  1715.409] (--) CHROME(0): CH7xxxLCDPower: [2]CH7019 PLL lock fail!
[  1715.409] (--) CHROME(0): CH7xxxLCDPower: [2]0x66 = 24!
[  1715.411] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = 4B!
[  1715.412] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = B!
[  1715.414] (--) CHROME(0): CH7xxxLCDPower: [3]CH7019 PLL lock fail!
[  1715.414] (--) CHROME(0): CH7xxxLCDPower: [3]0x66 = 24!
[  1715.416] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = 4B!
[  1715.417] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = B!
[  1715.418] (--) CHROME(0): CH7xxxLCDPower: [4]CH7019 PLL lock fail!
[  1715.418] (--) CHROME(0): CH7xxxLCDPower: [4]0x66 = 20!
[  1715.421] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = 4B!
[  1715.422] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = B!
[  1715.423] (--) CHROME(0): CH7xxxLCDPower: [5]CH7019 PLL lock fail!
[  1715.423] (--) CHROME(0): CH7xxxLCDPower: [5]0x66 = 20!
[  1715.425] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = 4B!
[  1715.426] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = B!
[  1715.428] (--) CHROME(0): CH7xxxLCDPower: [6]CH7019 PLL lock fail!
[  1715.428] (--) CHROME(0): CH7xxxLCDPower: [6]0x66 = 20!
[  1715.430] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = 4B!
[  1715.431] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = B!
[  1715.433] (--) CHROME(0): CH7xxxLCDPower: [7]CH7019 PLL lock fail!
[  1715.433] (--) CHROME(0): CH7xxxLCDPower: [7]0x66 = 20!
[  1715.435] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = 4B!
[  1715.436] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = B!
[  1715.437] (--) CHROME(0): CH7xxxLCDPower: [8]CH7019 PLL lock fail!
[  1715.437] (--) CHROME(0): CH7xxxLCDPower: [8]0x66 = 20!
[  1715.439] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = 4B!
[  1715.440] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = B!
[  1715.442] (--) CHROME(0): CH7xxxLCDPower: [9]CH7019 PLL lock fail!
[  1715.442] (--) CHROME(0): CH7xxxLCDPower: [9]0x66 = 24!
[  1715.444] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = 4B!
[  1715.445] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = B!
[  1715.448] (--) CHROME(0): CH7xxxLCDPower: CH7019 PLL lock ok!
[  1715.452] (II) CHROME(0): ViaDisplayDisableCRT
[  1715.452] (II) CHROME(0): ViaTVPower: Off.
[  1715.452] (II) CHROME(0): CH7xxxTVPower: Off
[  1715.453] DRM memory allocation failed -6
[  1715.454] 635904 bytes of Linear memory allocated at 641000, handle 158183400
[  1715.474] (II) CHROME(0): Benchmarking video copy.  Less time is better.
[  1715.519] (--) CHROME(0): Timed   libc YUV420 copy... 15927229. Throughput: 29.7 MiB/s.
[  1715.563] (--) CHROME(0): Timed kernel YUV420 copy... 15921138. Throughput: 29.7 MiB/s.
[  1715.611] (--) CHROME(0): Timed    SSE YUV420 copy... 17950194. Throughput: 26.3 MiB/s.
[  1715.660] (--) CHROME(0): Timed    MMX YUV420 copy... 17952634. Throughput: 26.3 MiB/s.
[  1715.708] (--) CHROME(0): Timed 3DNow! YUV420 copy... 17927484. Throughput: 26.3 MiB/s.
[  1715.757] (--) CHROME(0): Timed   MMX2 YUV420 copy... 17950962. Throughput: 26.3 MiB/s.
[  1715.757] Freed 6557696 (pool 4)
[  1715.757] (--) CHROME(0): Using kernel YUV42X copy for video.
[  1715.758] (WW) CHROME(0): [XvMC] XvMC is not supported on this chipset.
[  1715.758] (II) CHROME(0): - Done
[  1715.758] (--) RandR disabled
[  1715.789] (II) AIGLX: Screen 0 is not DRI2 capable
[  1715.789] (II) AIGLX: Screen 0 is not DRI capable
[  1715.801] (II) AIGLX: Loaded and initialized swrast
[  1715.802] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[  1715.803] (II) CHROME(0): Setting screen physical size to 270 x 203
[  1716.489] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[  1716.489] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1716.489] (**) Power Button: Applying InputClass "Keyboard Defaults"
[  1716.489] (II) LoadModule: "evdev"
[  1716.490] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1716.491] (II) Module evdev: vendor="X.Org Foundation"
[  1716.491] 	compiled for 1.13.0, module version = 2.7.3
[  1716.491] 	Module class: X.Org XInput Driver
[  1716.491] 	ABI class: X.Org XInput driver, version 18.0
[  1716.491] (II) Using input driver 'evdev' for 'Power Button'
[  1716.491] (**) Power Button: always reports core events
[  1716.491] (**) evdev: Power Button: Device: "/dev/input/event5"
[  1716.492] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1716.492] (--) evdev: Power Button: Found keys
[  1716.492] (II) evdev: Power Button: Configuring as keyboard
[  1716.492] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[  1716.492] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1716.492] (**) Option "xkb_rules" "evdev"
[  1716.492] (**) Option "xkb_model" "evdev"
[  1716.492] (**) Option "xkb_layout" "fr"
[  1716.492] (**) Option "xkb_variant" "latin9"
[  1716.616] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[  1716.616] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1716.616] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[  1716.616] (II) Using input driver 'evdev' for 'Video Bus'
[  1716.616] (**) Video Bus: always reports core events
[  1716.616] (**) evdev: Video Bus: Device: "/dev/input/event6"
[  1716.616] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1716.616] (--) evdev: Video Bus: Found keys
[  1716.616] (II) evdev: Video Bus: Configuring as keyboard
[  1716.616] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input6/event6"
[  1716.616] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1716.616] (**) Option "xkb_rules" "evdev"
[  1716.616] (**) Option "xkb_model" "evdev"
[  1716.616] (**) Option "xkb_layout" "fr"
[  1716.617] (**) Option "xkb_variant" "latin9"
[  1716.618] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1716.618] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1716.618] (**) Power Button: Applying InputClass "Keyboard Defaults"
[  1716.618] (II) Using input driver 'evdev' for 'Power Button'
[  1716.619] (**) Power Button: always reports core events
[  1716.619] (**) evdev: Power Button: Device: "/dev/input/event2"
[  1716.619] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1716.619] (--) evdev: Power Button: Found keys
[  1716.619] (II) evdev: Power Button: Configuring as keyboard
[  1716.619] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[  1716.619] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1716.619] (**) Option "xkb_rules" "evdev"
[  1716.619] (**) Option "xkb_model" "evdev"
[  1716.619] (**) Option "xkb_layout" "fr"
[  1716.619] (**) Option "xkb_variant" "latin9"
[  1716.621] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[  1716.621] (II) No input driver specified, ignoring this device.
[  1716.621] (II) This device may have been added with another device file.
[  1716.622] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[  1716.622] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1716.622] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[  1716.622] (II) Using input driver 'evdev' for 'Sleep Button'
[  1716.622] (**) Sleep Button: always reports core events
[  1716.622] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[  1716.623] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  1716.623] (--) evdev: Sleep Button: Found keys
[  1716.623] (II) evdev: Sleep Button: Configuring as keyboard
[  1716.623] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[  1716.623] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  1716.623] (**) Option "xkb_rules" "evdev"
[  1716.623] (**) Option "xkb_model" "evdev"
[  1716.623] (**) Option "xkb_layout" "fr"
[  1716.623] (**) Option "xkb_variant" "latin9"
[  1716.625] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[  1716.625] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[  1716.625] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[  1716.625] (**) Logitech USB Optical Mouse: always reports core events
[  1716.625] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[  1716.625] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc06c
[  1716.626] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[  1716.626] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[  1716.626] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[  1716.626] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[  1716.626] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[  1716.626] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[  1716.626] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[  1716.626] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1716.626] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input1/event1"
[  1716.626] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[  1716.626] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[  1716.627] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[  1716.627] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[  1716.627] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[  1716.627] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[  1716.628] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[  1716.628] (II) No input driver specified, ignoring this device.
[  1716.628] (II) This device may have been added with another device file.
[  1716.629] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1716.629] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1716.629] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[  1716.629] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1716.629] (**) AT Translated Set 2 keyboard: always reports core events
[  1716.629] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1716.629] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1716.630] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1716.630] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1716.630] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1716.630] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[  1716.630] (**) Option "xkb_rules" "evdev"
[  1716.630] (**) Option "xkb_model" "evdev"
[  1716.630] (**) Option "xkb_layout" "fr"
[  1716.630] (**) Option "xkb_variant" "latin9"
[  1716.632] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[  1716.632] (II) No input driver specified, ignoring this device.
[  1716.632] (II) This device may have been added with another device file.
[  1716.646] (II) CHROME(0): ViaLCDPower: On.
[  1716.646] (II) CHROME(0): CH7xxxLCDPower: On
[  1716.650] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = 4B!
[  1716.651] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = B!
[  1716.653] (--) CHROME(0): CH7xxxLCDPower: [1]CH7019 PLL lock fail!
[  1716.653] (--) CHROME(0): CH7xxxLCDPower: [1]0x66 = 24!
[  1716.655] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = 4B!
[  1716.656] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = B!
[  1716.657] (--) CHROME(0): CH7xxxLCDPower: [2]CH7019 PLL lock fail!
[  1716.657] (--) CHROME(0): CH7xxxLCDPower: [2]0x66 = 24!
[  1716.659] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = 4B!
[  1716.660] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = B!
[  1716.662] (--) CHROME(0): CH7xxxLCDPower: [3]CH7019 PLL lock fail!
[  1716.662] (--) CHROME(0): CH7xxxLCDPower: [3]0x66 = 24!
[  1716.664] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = 4B!
[  1716.665] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = B!
[  1716.666] (--) CHROME(0): CH7xxxLCDPower: [4]CH7019 PLL lock fail!
[  1716.666] (--) CHROME(0): CH7xxxLCDPower: [4]0x66 = 20!
[  1716.669] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = 4B!
[  1716.670] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = B!
[  1716.671] (--) CHROME(0): CH7xxxLCDPower: [5]CH7019 PLL lock fail!
[  1716.671] (--) CHROME(0): CH7xxxLCDPower: [5]0x66 = 24!
[  1716.673] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = 4B!
[  1716.674] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = B!
[  1716.676] (--) CHROME(0): CH7xxxLCDPower: [6]CH7019 PLL lock fail!
[  1716.676] (--) CHROME(0): CH7xxxLCDPower: [6]0x66 = 24!
[  1716.678] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = 4B!
[  1716.679] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = B!
[  1716.680] (--) CHROME(0): CH7xxxLCDPower: [7]CH7019 PLL lock fail!
[  1716.680] (--) CHROME(0): CH7xxxLCDPower: [7]0x66 = 24!
[  1716.683] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = 4B!
[  1716.683] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = B!
[  1716.685] (--) CHROME(0): CH7xxxLCDPower: [8]CH7019 PLL lock fail!
[  1716.685] (--) CHROME(0): CH7xxxLCDPower: [8]0x66 = 24!
[  1716.687] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = 4B!
[  1716.688] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = B!
[  1716.690] (--) CHROME(0): CH7xxxLCDPower: [9]CH7019 PLL lock fail!
[  1716.690] (--) CHROME(0): CH7xxxLCDPower: [9]0x66 = 24!
[  1716.692] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = 4B!
[  1716.693] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = B!
[  1716.696] (--) CHROME(0): CH7xxxLCDPower: CH7019 PLL lock ok!
[  1720.139] (II) CHROME(0): VIALeaveVT
[  1720.139] (II) CHROME(0): ViaLCDPower: On.
[  1720.139] (II) CHROME(0): CH7xxxLCDPower: On
[  1720.143] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = 4B!
[  1720.144] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = B!
[  1720.145] (--) CHROME(0): CH7xxxLCDPower: [1]CH7019 PLL lock fail!
[  1720.145] (--) CHROME(0): CH7xxxLCDPower: [1]0x66 = 24!
[  1720.147] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = 4B!
[  1720.148] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = B!
[  1720.150] (--) CHROME(0): CH7xxxLCDPower: [2]CH7019 PLL lock fail!
[  1720.150] (--) CHROME(0): CH7xxxLCDPower: [2]0x66 = 24!
[  1720.152] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = 4B!
[  1720.153] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = B!
[  1720.154] (--) CHROME(0): CH7xxxLCDPower: [3]CH7019 PLL lock fail!
[  1720.155] (--) CHROME(0): CH7xxxLCDPower: [3]0x66 = 24!
[  1720.157] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = 4B!
[  1720.158] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = B!
[  1720.159] (--) CHROME(0): CH7xxxLCDPower: [4]CH7019 PLL lock fail!
[  1720.159] (--) CHROME(0): CH7xxxLCDPower: [4]0x66 = 24!
[  1720.161] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = 4B!
[  1720.162] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = B!
[  1720.164] (--) CHROME(0): CH7xxxLCDPower: [5]CH7019 PLL lock fail!
[  1720.164] (--) CHROME(0): CH7xxxLCDPower: [5]0x66 = 24!
[  1720.166] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = 4B!
[  1720.167] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = B!
[  1720.168] (--) CHROME(0): CH7xxxLCDPower: [6]CH7019 PLL lock fail!
[  1720.168] (--) CHROME(0): CH7xxxLCDPower: [6]0x66 = 24!
[  1720.171] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = 4B!
[  1720.172] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = B!
[  1720.173] (--) CHROME(0): CH7xxxLCDPower: [7]CH7019 PLL lock fail!
[  1720.173] (--) CHROME(0): CH7xxxLCDPower: [7]0x66 = 24!
[  1720.175] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = 4B!
[  1720.176] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = B!
[  1720.178] (--) CHROME(0): CH7xxxLCDPower: [8]CH7019 PLL lock fail!
[  1720.178] (--) CHROME(0): CH7xxxLCDPower: [8]0x66 = 24!
[  1720.180] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = 4B!
[  1720.181] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = B!
[  1720.183] (--) CHROME(0): CH7xxxLCDPower: [9]CH7019 PLL lock fail!
[  1720.183] (--) CHROME(0): CH7xxxLCDPower: [9]0x66 = 24!
[  1720.185] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = 4B!
[  1720.186] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = B!
[  1720.189] (--) CHROME(0): CH7xxxLCDPower: CH7019 PLL lock ok!
[  1720.193] (II) CHROME(0): CH7xxxRestore
[  1720.289] (II) CHROME(0): VIARestore
[  1720.289] (II) CHROME(0): ViaDisplayInit
[  1720.289] (II) CHROME(0): ViaSecondDisplayChannelDisable
[  1720.289] (II) CHROME(0): CH7xxxRestore
[  1720.385] (II) CHROME(0): ViaDisablePrimaryFIFO
[  1720.385] (II) CHROME(0): VIARestore
[  1720.385] (II) CHROME(0): ViaDisplayInit
[  1720.385] (II) CHROME(0): ViaSecondDisplayChannelDisable
[  1720.385] (II) CHROME(0): CH7xxxRestore
[  1720.481] (II) CHROME(0): ViaDisablePrimaryFIFO
[  1780.257] (II) config/udev: removing device Logitech USB Optical Mouse
[  1780.257] (II) evdev: Logitech USB Optical Mouse: Close
[  1780.257] (II) UnloadModule: "evdev"
[  1782.014] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[  1782.014] (II) No input driver specified, ignoring this device.
[  1782.014] (II) This device may have been added with another device file.
[  1782.015] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[  1782.015] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[  1782.015] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[  1782.015] (**) Logitech USB Optical Mouse: always reports core events
[  1782.015] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[  1782.016] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc06c
[  1782.016] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[  1782.016] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[  1782.016] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[  1782.016] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[  1782.016] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[  1782.016] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[  1782.016] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[  1782.016] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1782.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input8/event1"
[  1782.016] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[  1782.016] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[  1782.017] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[  1782.017] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[  1782.017] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[  1782.017] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[  1811.859] (II) CHROME(0): VIAEnterVT
[  1811.859] (II) CHROME(0): VIASave
[  1811.859] (II) CHROME(0): Primary
[  1811.859] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[  1811.860] (II) CHROME(0): Crtc...
[  1811.860] (II) CHROME(0): TVSave...
[  1811.860] (II) CHROME(0): CH7xxxSave
[  1812.046] (II) CHROME(0): VIASave
[  1812.046] (II) CHROME(0): Primary
[  1812.046] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[  1812.046] (II) CHROME(0): Crtc...
[  1812.046] (II) CHROME(0): TVSave...
[  1812.046] (II) CHROME(0): CH7xxxSave
[  1812.208] (II) CHROME(0): CH7xxxSave
[  1812.369] (II) CHROME(0): ViaLCDPower: Off.
[  1812.369] (II) CHROME(0): CH7xxxLCDPower: Off
[  1812.374] (II) CHROME(0): ViaDisplayDisableCRT
[  1812.374] (II) CHROME(0): ViaTVPower: Off.
[  1812.374] (II) CHROME(0): CH7xxxTVPower: Off
[  1812.376] (II) CHROME(0): ViaSecondCRTCModeValid
[  1812.376] (II) CHROME(0): ViaLCDPower: Off.
[  1812.376] (II) CHROME(0): CH7xxxLCDPower: Off
[  1812.381] (II) CHROME(0): ViaModeSecondCRTC
[  1812.381] (II) CHROME(0): mode: 0x9a0b198
[  1812.381] (II) CHROME(0): mode->name: 0x9a55fe8
[  1812.381] (II) CHROME(0): mode->name: 1024x768
[  1812.381] (II) CHROME(0): ViaSecondCRTCSetMode
[  1812.381] (II) CHROME(0): Setting up 1024x768
[  1812.381] (II) CHROME(0): ViaSetSecondaryFIFO
[  1812.382] (II) CHROME(0): ViaComputeDotClock 65000 : 0d3b : 866d
[  1812.382] (II) CHROME(0): ViaSetDotclock to 0x00866d
[  1812.382] (II) CHROME(0): ViaSetUseExternalClock
[  1812.382] (II) CHROME(0): ViaSecondDisplayChannelEnable
[  1812.382] (II) CHROME(0): ViaDisplayDisableSimultaneous
[  1812.382] (II) CHROME(0): ViaLCDPower: On.
[  1812.382] (II) CHROME(0): CH7xxxLCDPower: On
[  1812.386] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = 4B!
[  1812.386] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = B!
[  1812.388] (--) CHROME(0): CH7xxxLCDPower: [1]CH7019 PLL lock fail!
[  1812.388] (--) CHROME(0): CH7xxxLCDPower: [1]0x66 = 24!
[  1812.390] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = 4B!
[  1812.391] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = B!
[  1812.393] (--) CHROME(0): CH7xxxLCDPower: [2]CH7019 PLL lock fail!
[  1812.393] (--) CHROME(0): CH7xxxLCDPower: [2]0x66 = 24!
[  1812.395] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = 4B!
[  1812.396] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = B!
[  1812.398] (--) CHROME(0): CH7xxxLCDPower: [3]CH7019 PLL lock fail!
[  1812.398] (--) CHROME(0): CH7xxxLCDPower: [3]0x66 = 24!
[  1812.400] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = 4B!
[  1812.401] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = B!
[  1812.402] (--) CHROME(0): CH7xxxLCDPower: [4]CH7019 PLL lock fail!
[  1812.402] (--) CHROME(0): CH7xxxLCDPower: [4]0x66 = 24!
[  1812.405] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = 4B!
[  1812.405] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = B!
[  1812.407] (--) CHROME(0): CH7xxxLCDPower: [5]CH7019 PLL lock fail!
[  1812.407] (--) CHROME(0): CH7xxxLCDPower: [5]0x66 = 24!
[  1812.409] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = 4B!
[  1812.410] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = B!
[  1812.412] (--) CHROME(0): CH7xxxLCDPower: [6]CH7019 PLL lock fail!
[  1812.412] (--) CHROME(0): CH7xxxLCDPower: [6]0x66 = 24!
[  1812.414] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = 4B!
[  1812.415] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = B!
[  1812.416] (--) CHROME(0): CH7xxxLCDPower: [7]CH7019 PLL lock fail!
[  1812.416] (--) CHROME(0): CH7xxxLCDPower: [7]0x66 = 20!
[  1812.419] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = 4B!
[  1812.420] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = B!
[  1812.421] (--) CHROME(0): CH7xxxLCDPower: [8]CH7019 PLL lock fail!
[  1812.421] (--) CHROME(0): CH7xxxLCDPower: [8]0x66 = 20!
[  1812.423] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = 4B!
[  1812.424] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = B!
[  1812.426] (--) CHROME(0): CH7xxxLCDPower: [9]CH7019 PLL lock fail!
[  1812.426] (--) CHROME(0): CH7xxxLCDPower: [9]0x66 = 20!
[  1812.428] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = 4B!
[  1812.429] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = B!
[  1812.432] (--) CHROME(0): CH7xxxLCDPower: CH7019 PLL lock ok!
[  1812.436] (II) CHROME(0): ViaDisplayDisableCRT
[  1812.436] (II) CHROME(0): ViaTVPower: Off.
[  1812.436] (II) CHROME(0): CH7xxxTVPower: Off
[  1812.437] (II) CHROME(0): VIALoadRgbLut
[  1812.438] (II) CHROME(0): EDID vendor "AUO", prod id 3846
[  1812.438] (II) CHROME(0): ViaComputeDotClock 65000 : 0d3b : 866d
[  1812.445] (--) CHROME(0): Test for CRT with VSYNC
[  1812.445] (II) CHROME(0): CH7xxxDACDetect
[  1812.453] (--) CHROME(0): CH7xxx: Nothing connected.
[  1812.570] (II) CHROME(0): ViaLCDPower: On.
[  1812.570] (II) CHROME(0): CH7xxxLCDPower: On
[  1812.573] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = 4B!
[  1812.574] (--) CHROME(0): CH7xxxLCDPower: [1]write 0x63 = B!
[  1812.576] (--) CHROME(0): CH7xxxLCDPower: [1]CH7019 PLL lock fail!
[  1812.576] (--) CHROME(0): CH7xxxLCDPower: [1]0x66 = 20!
[  1812.578] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = 4B!
[  1812.579] (--) CHROME(0): CH7xxxLCDPower: [2]write 0x63 = B!
[  1812.581] (--) CHROME(0): CH7xxxLCDPower: [2]CH7019 PLL lock fail!
[  1812.581] (--) CHROME(0): CH7xxxLCDPower: [2]0x66 = 20!
[  1812.583] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = 4B!
[  1812.584] (--) CHROME(0): CH7xxxLCDPower: [3]write 0x63 = B!
[  1812.585] (--) CHROME(0): CH7xxxLCDPower: [3]CH7019 PLL lock fail!
[  1812.585] (--) CHROME(0): CH7xxxLCDPower: [3]0x66 = 24!
[  1812.587] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = 4B!
[  1812.588] (--) CHROME(0): CH7xxxLCDPower: [4]write 0x63 = B!
[  1812.590] (--) CHROME(0): CH7xxxLCDPower: [4]CH7019 PLL lock fail!
[  1812.590] (--) CHROME(0): CH7xxxLCDPower: [4]0x66 = 24!
[  1812.592] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = 4B!
[  1812.593] (--) CHROME(0): CH7xxxLCDPower: [5]write 0x63 = B!
[  1812.595] (--) CHROME(0): CH7xxxLCDPower: [5]CH7019 PLL lock fail!
[  1812.595] (--) CHROME(0): CH7xxxLCDPower: [5]0x66 = 24!
[  1812.597] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = 4B!
[  1812.598] (--) CHROME(0): CH7xxxLCDPower: [6]write 0x63 = B!
[  1812.600] (--) CHROME(0): CH7xxxLCDPower: [6]CH7019 PLL lock fail!
[  1812.600] (--) CHROME(0): CH7xxxLCDPower: [6]0x66 = 20!
[  1812.602] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = 4B!
[  1812.603] (--) CHROME(0): CH7xxxLCDPower: [7]write 0x63 = B!
[  1812.604] (--) CHROME(0): CH7xxxLCDPower: [7]CH7019 PLL lock fail!
[  1812.604] (--) CHROME(0): CH7xxxLCDPower: [7]0x66 = 20!
[  1812.607] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = 4B!
[  1812.607] (--) CHROME(0): CH7xxxLCDPower: [8]write 0x63 = B!
[  1812.609] (--) CHROME(0): CH7xxxLCDPower: [8]CH7019 PLL lock fail!
[  1812.609] (--) CHROME(0): CH7xxxLCDPower: [8]0x66 = 20!
[  1812.611] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = 4B!
[  1812.612] (--) CHROME(0): CH7xxxLCDPower: [9]write 0x63 = B!
[  1812.614] (--) CHROME(0): CH7xxxLCDPower: [9]CH7019 PLL lock fail!
[  1812.614] (--) CHROME(0): CH7xxxLCDPower: [9]0x66 = 20!
[  1812.616] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = 4B!
[  1812.617] (--) CHROME(0): CH7xxxLCDPower: [10]write 0x63 = B!
[  1812.620] (--) CHROME(0): CH7xxxLCDPower: CH7019 PLL lock ok!

and lsmod output :

Module                  Size  Used by
drm                   147591  0 
fuse                   58964  9 
xts                     1961  1 
gf128mul                5886  1 xts
sha256_generic         11777  2 
cryptd                  6992  0 
aes_i586                6940  6 
aes_generic            26054  1 aes_i586
cbc                     2084  1 
dm_crypt               13340  2 
dm_mod                 57051  5 dm_crypt
arc4                    1118  2 
ath5k                 129860  0 
ath                    12022  1 ath5k
mac80211              190844  1 ath5k
cfg80211              139342  3 mac80211,ath,ath5k
rfkill                 12568  2 cfg80211
via_camera             11558  0 
videobuf_dma_sg         7136  1 via_camera
videobuf_core          13807  2 videobuf_dma_sg,via_camera
v4l2_common             4502  1 via_camera
videodev               70770  2 v4l2_common,via_camera
media                   8321  1 videodev
viafb                  70073  1 via_camera
snd_via82xx            17430  2 
snd_via82xx_modem       7415  0 
snd_mpu401_uart         4975  1 snd_via82xx
i2c_viapro              4623  0 
snd_ac97_codec         89932  2 snd_via82xx_modem,snd_via82xx
gameport                6424  1 snd_via82xx
i2c_algo_bit            4519  1 viafb
snd_rawmidi            15388  1 snd_mpu401_uart
i2c_core               16685  6 i2c_algo_bit,i2c_viapro,viafb,videodev,v4l2_common,drm
pcmcia                 31278  0 
snd_seq_device          4316  1 snd_rawmidi
ac97_bus                 874  1 snd_ac97_codec
snd_pcm                60657  3 snd_ac97_codec,snd_via82xx_modem,snd_via82xx
snd_page_alloc          5901  3 snd_pcm,snd_via82xx_modem,snd_via82xx
snd_timer              15062  1 snd_pcm
snd                    43516  12 snd_timer,snd_pcm,snd_seq_device,snd_rawmidi,snd_ac97_codec,snd_mpu401_uart,snd_via82xx_modem,snd_via82xx
via_ircc               13619  0 
ppdev                   4718  0 
soundcore               4634  1 snd
parport_pc             27881  0 
firewire_ohci          25720  0 
via_agp                 4942  1 
shpchp                 22529  0 
psmouse                56409  0 
yenta_socket           18812  0 
irda                   91406  1 via_ircc
pci_hotplug            21360  1 shpchp
firewire_core          43813  1 firewire_ohci
parport                26063  2 parport_pc,ppdev
agpgart                22031  2 via_agp,drm
pcmcia_rsrc             8840  1 yenta_socket
via_rhine              19259  0 
pcmcia_core            10209  3 pcmcia_rsrc,yenta_socket,pcmcia
crc_itu_t               1095  1 firewire_core
crc_ccitt               1095  1 irda
pcspkr                  1407  0 
processor              21839  1 
serio_raw               3390  0 
mii                     3375  1 via_rhine
video                   9915  0 
container               1929  0 
thermal                 6627  0 
ac                      1828  0 
button                  3646  0 
battery                 4921  0 
evdev                   7246  12 
ext4                  338412  6 
crc16                   1091  1 ext4
jbd2                   56909  1 ext4
mbcache                 4249  1 ext4
usbhid                 31222  0 
hid                    65084  1 usbhid
sd_mod                 25803  8 
sr_mod                 13020  0 
cdrom                  30444  1 sr_mod
ata_generic             2455  0 
pata_acpi               2388  0 
pata_via                7466  7 
libata                153450  3 pata_via,pata_acpi,ata_generic
uhci_hcd               19648  0 
scsi_mod              111992  3 libata,sr_mod,sd_mod
ehci_hcd               35303  0 
usbcore               120378  4 ehci_hcd,uhci_hcd,usbhid
floppy                 48517  0 

Thanks for your help.

Last edited by yodaz (2012-12-04 20:59:04)

Offline

#2 2012-12-09 10:04:38

yodaz
Member
Registered: 2011-03-08
Posts: 41

Re: Openchrome and 3D accel

After inserting via module and blacklisting viafb, the message disappears, but I had another error :

[   493.764] (EE) CHROME(0): [drm] drmAgpAcquire failed 19
[   494.304] (EE) CHROME(0): [drm] Failed to initialize DMA ring-buffer: 14
[   494.532] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/unichrome_dri.so failed (/usr/lib/xorg/modules/dri/unichrome_dri.so: cannot open shared object file: No such file or directory)
[   494.532] (EE) AIGLX: reverting to software rendering

So I tried to install missing unichrome-dri package, but I still get this

[   927.146] (EE) CHROME(0): [drm] drmAgpAcquire failed 19
[   927.916] (EE) AIGLX error: Calling driver entry point failed
[   927.916] (EE) AIGLX: reverting to software rendering

I've also tried with the following options, as suggested in the wiki, but no effect :

    Option     "EnableAGPDMA"   "false"
    Option     "AccelMethod"    "XAA"

Am I still missing something ? Is there someone with working Openchrome 3D Accel here ?

Offline

#3 2013-11-09 00:51:33

moebius_eye
Member
Registered: 2013-02-24
Posts: 6

Re: Openchrome and 3D accel

Hi.

I have very similar hardware and I'm trying to figure out what didn't go well with my driver (openchrome) install too.

I though, since you've had this problem a year ago, maybe you have a solution to share?

Here's my /etc/X11/xorg.conf.d/10-openchrome.conf:

Section "Device"
    Identifier "Via Device"
    Driver     "openchrome"
EndSection

Here's the output of Xorg: http://ix.io/8Xw

an lsmod output:

Module                  Size  Used by
drm                   186437  0 
snd_via82xx            17843  0 
snd_mpu401_uart         4815  1 snd_via82xx
snd_ac97_codec         89368  1 snd_via82xx
ac97_bus                 874  1 snd_ac97_codec
gameport                6164  1 snd_via82xx
snd_rawmidi            14892  1 snd_mpu401_uart
snd_seq_device          4252  1 snd_rawmidi
snd_pcm                64196  2 snd_via82xx,snd_ac97_codec
snd_page_alloc          5942  2 snd_via82xx,snd_pcm
snd_timer              15070  1 snd_pcm
snd                    44479  7 snd_via82xx,snd_ac97_codec,snd_timer,snd_pcm,snd_rawmidi,snd_mpu401_uart,snd_seq_device
padlock_sha             6347  0 
soundcore               4354  1 snd
padlock_aes             4987  0 
joydev                  7371  0 
mperf                    959  0 
evdev                   7496  3 
i2c_viapro              5295  0 
via_cputemp             2547  0 
serio_raw               4033  0 
hwmon_vid               2376  1 via_cputemp
i2c_core               19967  2 drm,i2c_viapro
via_agp                 4974  1 
agpgart                22015  2 drm,via_agp
shpchp                 22005  0 
fan                     2133  0 
thermal                 7112  0 
button                  3685  0 
processor              24787  1 
ext4                  408158  3 
crc16                   1091  1 ext4
mbcache                 4290  1 ext4
jbd2                   65856  1 ext4
hid_generic              749  0 
usbhid                 36609  0 
hid                    71271  2 hid_generic,usbhid
sd_mod                 28118  5 
ata_generic             2434  0 
pata_acpi               2367  0 
ehci_pci                3404  0 
uhci_hcd               21800  0 
ehci_hcd               42872  1 ehci_pci
pata_via                7186  0 
sata_via                6371  4 
usbcore               152569  4 uhci_hcd,ehci_hcd,ehci_pci,usbhid
usb_common              1172  1 usbcore
libata                149163  4 pata_acpi,sata_via,pata_via,ata_generic
scsi_mod              108195  2 libata,sd_mod
via_rhine              20009  0 
mii                     3375  1 via_rhine

an lspci output:

00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] (rev 01)

Offline

#4 2013-11-09 22:07:13

yodaz
Member
Registered: 2011-03-08
Posts: 41

Re: Openchrome and 3D accel

Hi,

I'm sorry, I forgot to update this thread.

According to this post http://lists.freedesktop.org/archives/o … 07079.html

It seems there are no way to get 3D accel for Via chipset.

But it was last year, perhaps things have changed. I don't know because I'm not using this chipset anymore.

Offline

Board footer

Powered by FluxBB