You are not logged in.

#1 2013-11-15 18:36:41

Otherbuns
Member
Registered: 2013-11-15
Posts: 5

[SOLVED]A very defying Tint2 system tray

Hi there!

I'm having some serious problems with my tint2-configuration. Or rather, the configuration should be fine, but the panel seems not to agree.

I cannot get the system tray to work. It just isn't there. I have first of all tried basic configuration through the standard graphical configuration tool, where it responds to all my changes except activating the system tray. Here is the tray part of my configuration file:

#System Tray
systray = 1
systray_padding = 0 3 2
systray_sort = ascending
systray_background_id = 0
systray_icon_size = 0

So far, so good. The background is the same as for the other panels, and the icon size to automatic. It is clearly enabled, both in the graphical interface and in the config file itself. I have tried with two different icon sets, thinking that perhaps it was just the icons that didn't load, but to no avail. Here is the output when I fire up tint2 through the terminal:

$ tint2
real transparency off.... depth: 24
xRandr: Found crtc's: 1
xRandr: Linking output VBOX0 with crtc 0
tint2 : nb monitor 1, nb monitor used 1, nb desktop 4

I fail to see anything here that would explain the total absence of the system tray. There is no other systray in the way, and I'm running Openbox as a stand-alone WM. Is there anything obvious I have missed?

Thanks,
Otherbuns

Last edited by Otherbuns (2013-11-15 19:06:08)

Offline

#2 2013-11-15 18:41:35

K ³
Member
Registered: 2013-11-12
Posts: 15

Re: [SOLVED]A very defying Tint2 system tray

$ cat ~/.config/tint2/tint2rc

Offline

#3 2013-11-15 18:43:45

2ManyDogs
Forum Fellow
Registered: 2012-01-15
Posts: 4,648

Re: [SOLVED]A very defying Tint2 system tray

Otherbuns, welcome to Arch, and thank you for using code tags. As K ³ suggests, we need to see your entire tint2rc file, not just the tray portion.

Offline

#4 2013-11-15 18:45:20

Otherbuns
Member
Registered: 2013-11-15
Posts: 5

Re: [SOLVED]A very defying Tint2 system tray

Of course:

# Tint2 config file


# Background definitions
# ID 1
rounded = 3
border_width = 2
background_color = #000000 60
border_color = #FFFFFF 87

# ID 2
rounded = 3
border_width = 0
background_color = #FFFFFF 40
border_color = #0DF91A 60

# ID 3
rounded = 3
border_width = 0
background_color = #FFFFFF 8
border_color = #27FD0E 60

# Panel
panel_monitor = 1
panel_position = bottom center horizontal
panel_size = 99% 30
panel_margin = 0 0
panel_padding = 7 0 7
panel_dock = 0
wm_menu = 1
panel_layer = top
panel_background_id = 1

# Panel Autohide
autohide = 0
autohide_show_timeout = 10
autohide_hide_timeout = 2
autohide_height = 2
strut_policy = follow_size

# Taskbar
taskbar_mode = single_desktop
taskbar_padding = 2 3 2
taskbar_background_id = 0
taskbar_active_background_id = 0

# Tasks
urgent_nb_of_blink = 8
task_icon = 1
task_text = 1
task_centered = 1
task_maximum_size = 140 35
task_padding = 6 2
task_background_id = 3
task_active_background_id = 2
task_urgent_background_id = 2
task_iconified_background_id = 3

# Task Icons
task_icon_asb = 70 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 70 0 0

# Fonts
task_font = sans 7
task_font_color = #FFFFFF 60
task_active_font_color = #FFFFFF 80
task_urgent_font_color = #FFFFFF 80
task_iconified_font_color = #FFFFFF 60
font_shadow = 0

# System Tray
systray = 1
systray_padding = 0 3 2
systray_sort = ascending
systray_background_id = 0
systray_icon_size = 0

# Clock
time1_format = %H:%M
time1_font = sans 8
time2_format = %A %d %B
time2_font = sans 6
clock_font_color = #FFFFFF 66
clock_padding = 1 0
clock_background_id = 0
clock_rclick_command = orage

# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.7
tooltip_hide_timeout = 0.3
tooltip_background_id = 1
tooltip_font = sans 10
tooltip_font_color = #000000 80

# Mouse
mouse_middle = none
mouse_right = close
mouse_scroll_up = toggle
mouse_scroll_down = iconify

# Battery
battery = 1
battery_low_status = 10
battery_low_cmd = notify-send "battery low"
battery_hide = 98
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #FFFFFF 66
battery_padding = 1 0
battery_background_id = 0

# End of config

Last edited by Otherbuns (2013-11-15 18:46:09)

Offline

#5 2013-11-15 18:48:47

K ³
Member
Registered: 2013-11-12
Posts: 15

Re: [SOLVED]A very defying Tint2 system tray

Which version of tint2 are you trying to use? Can you name a few applications you are currently running and not seeing there?

FYI, I just replaced my config file with yours, restarted tint2 and everything (including system tray) looks normal.

Last edited by K ³ (2013-11-15 18:48:58)

Offline

#6 2013-11-15 18:55:38

Otherbuns
Member
Registered: 2013-11-15
Posts: 5

Re: [SOLVED]A very defying Tint2 system tray

Should be version 0.11-6, fresh from the community repos. It's also a fresh install, so not many other utilities running:

$ ps -A
  PID TTY          TIME CMD
    1 ?        00:00:00 systemd
    2 ?        00:00:00 kthreadd
    3 ?        00:00:00 ksoftirqd/0
    5 ?        00:00:00 kworker/0:0H
    7 ?        00:00:00 migration/0
    8 ?        00:00:00 rcu_preempt
    9 ?        00:00:00 rcu_bh
   10 ?        00:00:00 rcu_sched
   11 ?        00:00:00 watchdog/0
   12 ?        00:00:00 khelper
   13 ?        00:00:00 kdevtmpfs
   14 ?        00:00:00 netns
   15 ?        00:00:00 writeback
   16 ?        00:00:00 bioset
   17 ?        00:00:00 kworker/u3:0
   18 ?        00:00:00 kblockd
   19 ?        00:00:00 kworker/0:1
   20 ?        00:00:00 khungtaskd
   21 ?        00:00:00 kswapd0
   22 ?        00:00:00 ksmd
   23 ?        00:00:00 fsnotify_mark
   24 ?        00:00:00 crypto
   29 ?        00:00:00 kthrotld
   31 ?        00:00:00 deferwq
   54 ?        00:00:00 ata_sff
   55 ?        00:00:00 khubd
   56 ?        00:00:00 scsi_eh_0
   57 ?        00:00:00 scsi_eh_1
   59 ?        00:00:00 kworker/u2:3
   60 ?        00:00:00 scsi_eh_2
   73 ?        00:00:00 jbd2/sda1-8
   74 ?        00:00:00 ext4-rsv-conver
   90 ?        00:00:00 systemd-journal
  101 ?        00:00:00 kworker/0:2
  118 ?        00:00:00 systemd-udevd
  136 ?        00:00:00 iprt
  139 ?        00:00:00 kworker/u3:2
  140 ?        00:00:00 systemd-logind
  141 ?        00:00:00 dbus-daemon
  144 tty1     00:00:00 agetty
  145 ?        00:00:00 slim
  146 ?        00:00:00 kpsmoused
  151 tty7     00:00:12 X
  245 ?        00:00:00 systemd
  246 ?        00:00:00 openbox
  248 ?        00:00:00 (sd-pam)
  284 ?        00:00:00 dhcpcd
  292 ?        00:00:01 tilda
  298 ?        00:00:00 dbus-launch
  299 ?        00:00:00 dbus-daemon
  301 ?        00:00:00 at-spi-bus-laun
  305 ?        00:00:00 dbus-daemon
  308 ?        00:00:00 at-spi2-registr
  310 ?        00:00:00 gnome-pty-helpe
  311 pts/0    00:00:00 bash
  366 ?        00:00:00 tint2
  419 ?        00:00:00 kworker/u2:1
  434 ?        00:00:26 firefox
  479 ?        00:00:00 terminator
  494 ?        00:00:00 gnome-pty-helpe
  495 pts/1    00:00:00 bash
  504 ?        00:00:00 dconf-service
  532 pts/1    00:00:00 ps

Offline

#7 2013-11-15 18:58:36

K ³
Member
Registered: 2013-11-12
Posts: 15

Re: [SOLVED]A very defying Tint2 system tray

I fail to see anything that should be displayed in your tray. Is there any specific application you expect to be there?

Offline

#8 2013-11-15 19:04:14

Otherbuns
Member
Registered: 2013-11-15
Posts: 5

Re: [SOLVED]A very defying Tint2 system tray

Tilda, for instance has a system tray icon which doesn't display. I also just installed Gvolwheel and Skype, neither of which show up.

Offline

#9 2013-11-15 19:05:42

Otherbuns
Member
Registered: 2013-11-15
Posts: 5

Re: [SOLVED]A very defying Tint2 system tray

Seems I just stumbled upon a solution anyway. A third reinstallation when not running X seemed to do the trick, and now all the icons are showing. Will mark as solved, and many thanks for your help. smile

Offline

Board footer

Powered by FluxBB