Arch Linux

katta

Member

Registered: 2013-09-29

Posts: 3

nvidia-dkms module for GeForce 610M

Hello everybody,
I always use nvidia-dkms package as driver for my GeForce 610M GPU
But recently when I try to load nvidia module modprobe produce this error:

# modprobe nvidia
modprobe: ERROR: could not insert 'nvidia': No such device

so  dmesg | tail :

[ 3898.681700] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
[ 3898.681733] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:1058)
NVRM: installed in this system is not supported by the 331.20
NVRM: NVIDIA Linux driver release.  Please see 'Appendix
NVRM: A - Supported NVIDIA GPU Products' in this release's
NVRM: README, available on the Linux driver download page
NVRM: at www.nvidia.com.
[ 3898.681742] nvidia: probe of 0000:01:00.0 failed with error -1
[ 3898.681924] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 3898.681925] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 3898.681927] [drm] Module unloaded
[ 3898.682019] NVRM: NVIDIA init module failed!

How  can I make works nvidia driver with my GPU ?

Last edited by katta (2013-11-16 08:32:58)

katta

Member

Registered: 2013-09-29

Posts: 3

Re: nvidia-dkms module for GeForce 610M

Also usefull info:

# lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [GeForce 610M] (rev ff)