You are not logged in.
- Topics: Active | Unanswered
#1 2013-11-15 10:42:14
- jrussell
- Member
- From: Cape Town, South Africa
- Registered: 2012-08-16
- Posts: 510
random crash of PC (ata2 errors in journal)
I found this in my journal after my PC froze entirely, bios would not detect any harddrives for a while too.
Nov 14 20:59:17 russell-server kernel: perf samples too long (11101 > 9920), lowering kernel.perf_event_max_sample_rate to 12600
Nov 14 21:00:46 russell-server start_pms[26639]: Error obtaining Plex movie data for 2075315
Nov 14 21:01:01 russell-server crond[2204]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 14 21:01:01 russell-server CROND[2205]: (root) CMD (run-parts /etc/cron.hourly)
Nov 14 21:01:01 russell-server CROND[2204]: pam_unix(crond:session): session closed for user root
Nov 14 21:01:02 russell-server kernel: ata2: lost interrupt (Status 0x50)
Nov 14 21:01:02 russell-server kernel: ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 14 21:01:02 russell-server kernel: ata2.01: failed command: READ DMA EXT
Nov 14 21:01:02 russell-server kernel: ata2.01: cmd 25/00:88:98:a2:b7/00:00:a9:00:00/f0 tag 0 dma 69632 in
res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout)
Nov 14 21:01:02 russell-server kernel: ata2.01: status: { DRDY }
Nov 14 21:01:02 russell-server kernel: ata2: soft resetting link
Nov 14 21:01:03 russell-server kernel: ata2.01: configured for UDMA/133
Nov 14 21:01:03 russell-server kernel: ata2.01: device reported invalid CHS sector 0
Nov 14 21:01:03 russell-server kernel: ata2: EH complete
Nov 14 21:01:31 russell-server start_pms[26639]: Error obtaining Plex movie data for 2302755
Nov 14 21:03:38 russell-server kernel: ata2: lost interrupt (Status 0x50)
Nov 14 21:03:38 russell-server kernel: ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 14 21:03:38 russell-server kernel: ata2.01: failed command: READ DMA EXT
Nov 14 21:03:38 russell-server kernel: ata2.01: cmd 25/00:88:c8:5f:bf/00:00:a9:00:00/f0 tag 0 dma 69632 in
res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout)
Nov 14 21:03:38 russell-server kernel: ata2.01: status: { DRDY }
Nov 14 21:03:38 russell-server kernel: ata2: soft resetting link
Nov 14 21:03:39 russell-server kernel: ata2.01: configured for UDMA/133
Nov 14 21:03:39 russell-server kernel: ata2.01: device reported invalid CHS sector 0
Nov 14 21:03:39 russell-server kernel: ata2: EH complete
Nov 14 21:11:58 russell-server kernel: ata2: lost interrupt (Status 0x50)
Nov 14 21:11:58 russell-server kernel: ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 14 21:11:58 russell-server kernel: ata2.01: failed command: READ DMA EXT
Nov 14 21:11:58 russell-server kernel: ata2.01: cmd 25/00:00:28:f6:c5/00:01:a9:00:00/f0 tag 0 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout)
Nov 14 21:11:58 russell-server kernel: ata2.01: status: { DRDY }
Nov 14 21:11:58 russell-server kernel: ata2: soft resetting link
Nov 14 21:12:03 russell-server kernel: ata2.01: qc timeout (cmd 0x27)
Nov 14 21:12:03 russell-server kernel: ata2.01: failed to read native max address (err_mask=0x4)
Nov 14 21:12:03 russell-server kernel: ata2.01: HPA support seems broken, skipping HPA handling
Nov 14 21:12:03 russell-server kernel: ata2.01: revalidation failed (errno=-5)
Nov 14 21:12:08 russell-server kernel: ata2: link is slow to respond, please be patient (ready=0)
Nov 14 21:12:10 russell-server kernel: ata2: soft resetting link
Nov 14 21:12:11 russell-server kernel: ata2.01: configured for UDMA/133
Nov 14 21:12:11 russell-server kernel: ata2.01: device reported invalid CHS sector 0
Nov 14 21:12:11 russell-server kernel: ata2: EH complete
Nov 14 21:13:16 russell-server kernel: ata2: drained 7520 bytes to clear DRQ
Nov 14 21:13:16 russell-server kernel: ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 14 21:13:16 russell-server kernel: ata2.01: failed command: READ DMA EXT
Nov 14 21:13:16 russell-server kernel: ata2.01: cmd 25/00:00:50:23:ce/00:01:a9:00:00/f0 tag 0 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout)
Nov 14 21:13:16 russell-server kernel: ata2.01: status: { DRDY }
Nov 14 21:13:19 russell-server kernel: ata2: soft resetting link
Nov 14 21:13:26 russell-server kernel: ata2.01: qc timeout (cmd 0xec)
Nov 14 21:13:26 russell-server kernel: ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
Nov 14 21:13:26 russell-server kernel: ata2.01: revalidation failed (errno=-5)
Nov 14 21:13:31 russell-server kernel: ata2: link is slow to respond, please be patient (ready=0)
Nov 14 21:13:36 russell-server kernel: ata2: device not ready (errno=-16), forcing hardreset
Nov 14 21:13:36 russell-server kernel: ata2: soft resetting link
Nov 14 21:13:37 russell-server kernel: ata2.01: configured for UDMA/133
Nov 14 21:13:37 russell-server kernel: ata2.01: device reported invalid CHS sector 0
Nov 14 21:13:37 russell-server kernel: ata2: EH complete
Nov 14 21:14:23 russell-server kernel: ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 14 21:14:23 russell-server kernel: ata2.01: failed command: READ DMA EXT
Nov 14 21:14:23 russell-server kernel: ata2.01: cmd 25/00:00:50:e7:b3/00:01:a9:00:00/f0 tag 0 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout)
Nov 14 21:14:23 russell-server kernel: ata2.01: status: { DRDY }
Nov 14 21:14:27 russell-server kernel: ata2: soft resetting link
Nov 14 21:14:34 russell-server kernel: ata2.01: qc timeout (cmd 0xec)
Nov 14 21:14:34 russell-server kernel: ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
Nov 14 21:14:34 russell-server kernel: ata2.01: revalidation failed (errno=-5)
Nov 14 21:14:36 russell-server kernel: ata2: soft resetting link
Nov 14 21:14:49 russell-server kernel: ata2.01: qc timeout (cmd 0xec)
Nov 14 21:14:49 russell-server kernel: ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
Nov 14 21:14:49 russell-server kernel: ata2.01: revalidation failed (errno=-5)
Nov 14 21:14:54 russell-server kernel: ata2: link is slow to respond, please be patient (ready=0)
Nov 14 21:14:54 russell-server kernel: ata2: soft resetting link
Nov 14 21:14:55 russell-server kernel: ata2.01: configured for UDMA/133
Nov 14 21:14:55 russell-server kernel: ata2.01: device reported invalid CHS sector 0
Nov 14 21:14:55 russell-server kernel: ata2: EH complete
Nov 14 22:01:01 russell-server crond[3852]: pam_unix(crond:session): session opened for user root by (uid=0)busted motherboard?
edit: found this https://bugzilla.redhat.com/show_bug.cgi?id=549981
Are there any tests I can run?
Last edited by jrussell (2013-11-15 13:56:06)
bitcoin: 1G62YGRFkMDwhGr5T5YGovfsxLx44eZo7U
Offline
#2 2013-11-15 15:54:44
- x33a
- Forum Fellow
- Registered: 2009-08-15
- Posts: 4,587
Re: random crash of PC (ata2 errors in journal)
Try a SMART scan for starters. Either the drive or the cable is going.
Offline
#3 2013-11-15 19:02:40
- jrussell
- Member
- From: Cape Town, South Africa
- Registered: 2012-08-16
- Posts: 510
Re: random crash of PC (ata2 errors in journal)
getting a lot of:
Nov 15 16:03:34 russell-server kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
Nov 15 16:03:34 russell-server kernel: ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Nov 15 16:03:34 russell-server kernel: ata2.01: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
Nov 15 16:03:34 russell-server kernel: ata2.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 15 16:03:34 russell-server kernel: ata2.01: configured for UDMA/133
Nov 15 16:03:34 russell-server kernel: usb 5-5: new high-speed USB device number 2 using ehci-pci
Nov 15 16:03:34 russell-server kernel: ata1.00: HPA detected: current 312579695, native 312581808
Nov 15 16:03:34 russell-server kernel: ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
Nov 15 16:03:34 russell-server kernel: ata1.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 15 16:03:34 russell-server kernel: ata1.01: HPA detected: current 1953523055, native 1953525168
Nov 15 16:03:34 russell-server kernel: ata1.01: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
Nov 15 16:03:34 russell-server kernel: ata1.01: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 15 16:03:34 russell-server kernel: ata1.00: configured for UDMA/133
Nov 15 16:03:34 russell-server kernel: ata1.01: configured for UDMA/133
Nov 15 16:03:34 russell-server kernel: scsi 0:0:0:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5
Nov 15 16:03:34 russell-server kernel: scsi 0:0:1:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
Nov 15 16:03:34 russell-server kernel: scsi 1:0:1:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
Nov 15 16:03:34 russell-server kernel: sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
Nov 15 16:03:34 russell-server kernel: sd 0:0:1:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
Nov 15 16:03:34 russell-server kernel: sd 0:0:1:0: [sdb] Write Protect is off
Nov 15 16:03:34 russell-server kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Nov 15 16:03:34 russell-server kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 15 16:03:34 russell-server kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 15 16:03:34 russell-server kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 15 16:03:34 russell-server kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 15 16:03:34 russell-server kernel: sd 1:0:1:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Nov 15 16:03:34 russell-server kernel: sd 1:0:1:0: [sdc] 4096-byte physical blocks
Nov 15 16:03:34 russell-server kernel: sd 1:0:1:0: [sdc] Write Protect is off
Nov 15 16:03:34 russell-server kernel: sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
Nov 15 16:03:34 russell-server kernel: sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 15 16:03:34 russell-server kernel: usb 5-5: device descriptor read/64, error -71
Nov 15 16:03:34 russell-server kernel: sdc: sdc1
Nov 15 16:03:34 russell-server kernel: sd 1:0:1:0: [sdc] Attached SCSI disk
Nov 15 16:03:34 russell-server kernel: sda: sda1 sda2
Nov 15 16:03:34 russell-server kernel: sdb: sdb1
Nov 15 16:03:34 russell-server kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
Nov 15 16:03:34 russell-server kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 15 16:03:34 russell-server kernel: usb 5-5: device descriptor read/64, error -71
Nov 15 16:03:34 russell-server kernel: tsc: Refined TSC clocksource calibration: 1607.727 MHz
Nov 15 16:03:34 russell-server kernel: usb 5-5: new high-speed USB device number 3 using ehci-pci
Nov 15 16:03:34 russell-server kernel: usb 5-5: device descriptor read/64, error -71
Nov 15 16:03:34 russell-server kernel: usb 5-5: device descriptor read/64, error -71
Nov 15 16:03:34 russell-server kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Nov 15 16:03:34 russell-server kernel: usb 5-5: new high-speed USB device number 4 using ehci-pci
Nov 15 16:03:34 russell-server kernel: usb 5-5: device not accepting address 4, error -71
Nov 15 16:03:34 russell-server kernel: Switched to clocksource tsc
Nov 15 16:03:34 russell-server kernel: usb 5-5: new high-speed USB device number 5 using ehci-pci
Nov 15 16:03:34 russell-server systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Nov 15 16:03:34 russell-server systemd[1]: Set hostname to <russell-server>.
Nov 15 16:03:34 russell-server kernel: usb 5-5: device not accepting address 5, error -71
Nov 15 16:03:34 russell-server kernel: hub 5-0:1.0: unable to enumerate USB device on port 5
Nov 15 16:03:34 russell-server kernel: usb 3-1: new full-speed USB device number 2 using uhci_hcd
Nov 15 16:03:34 russell-server systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Nov 15 16:03:34 russell-server systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Nov 15 16:03:34 russell-server systemd[1]: Expecting device sys-subsystem-net-devices-enp2s5.device...
Nov 15 16:03:34 russell-server systemd[1]: Starting Remote File Systems.
Nov 15 16:03:34 russell-server systemd[1]: Reached target Remote File Systems.
Nov 15 16:03:34 russell-server systemd[1]: Starting Device-mapper event daemon FIFOs.
Nov 15 16:03:34 russell-server systemd[1]: Listening on Device-mapper event daemon FIFOs.
Nov 15 16:03:34 russell-server systemd[1]: Starting Delayed Shutdown Socket.
Nov 15 16:03:34 russell-server systemd[1]: Listening on Delayed Shutdown Socket.More specifically:
Nov 15 16:03:34 russell-server kernel: usb 5-5: device descriptor read/64, error -71
Nov 15 16:03:34 russell-server kernel: sdc: sdc1
Nov 15 16:03:34 russell-server kernel: sd 1:0:1:0: [sdc] Attached SCSI disk
Nov 15 16:03:34 russell-server kernel: sda: sda1 sda2
Nov 15 16:03:34 russell-server kernel: sdb: sdb1
Nov 15 16:03:34 russell-server kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
Nov 15 16:03:34 russell-server kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 15 16:03:34 russell-server kernel: usb 5-5: device descriptor read/64, error -71
Nov 15 16:03:34 russell-server kernel: tsc: Refined TSC clocksource calibration: 1607.727 MHz
Nov 15 16:03:34 russell-server kernel: usb 5-5: new high-speed USB device number 3 using ehci-pci
Nov 15 16:03:34 russell-server kernel: usb 5-5: device descriptor read/64, error -71
Nov 15 16:03:34 russell-server kernel: usb 5-5: device descriptor read/64, error -71
Nov 15 16:03:34 russell-server kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Nov 15 16:03:34 russell-server kernel: usb 5-5: new high-speed USB device number 4 using ehci-pci
Nov 15 16:03:34 russell-server kernel: usb 5-5: device not accepting address 4, error -71
Nov 15 16:03:34 russell-server kernel: Switched to clocksource tsc
Nov 15 16:03:34 russell-server kernel: usb 5-5: new high-speed USB device number 5 using ehci-pci
Nov 15 16:03:34 russell-server systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Nov 15 16:03:34 russell-server systemd[1]: Set hostname to <russell-server>.
Nov 15 16:03:34 russell-server kernel: usb 5-5: device not accepting address 5, error -71
Nov 15 16:03:34 russell-server kernel: hub 5-0:1.0: unable to enumerate USB device on port 5Are these errors related to the ata errors in post one?
Last edited by jrussell (2013-11-15 19:03:41)
bitcoin: 1G62YGRFkMDwhGr5T5YGovfsxLx44eZo7U
Offline
#4 2013-11-16 05:05:07
- x33a
- Forum Fellow
- Registered: 2009-08-15
- Posts: 4,587
Re: random crash of PC (ata2 errors in journal)
As for the usb errors, do you have any external hard drives attached?
Also, as I mentioned earlier, run a SMART scan.
Install smartmontools and first do
# smartctl --all /dev/<device> > smart.outto generate a log. And post its result here.
and then do
# smartctl --test=short /dev/<device>to do a quick scan of the hard drive. And see what result it gives.
Offline
#5 2013-11-16 05:52:35
- WonderWoofy
- Member
- From: Los Gatos, CA
- Registered: 2012-05-19
- Posts: 8,414
Re: random crash of PC (ata2 errors in journal)
If you have important data on the drive, you should probably ensure that your backups of it are current. In the event that the drive is on the way out, you probably want to do that before anything else.
Offline
#6 2013-11-16 11:31:23
- jrussell
- Member
- From: Cape Town, South Africa
- Registered: 2012-08-16
- Posts: 510
Re: random crash of PC (ata2 errors in journal)
Ok thanks for the help so far, USB errors seem to be related to the new USB printer, its the only USB device plugged into the PC.
Everything is backed up.
Here is lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 149.1G 0 disk
├─sda1 8:1 0 1007K 0 part
└─sda2 8:2 0 144G 0 part /
sdb 8:16 0 931.5G 0 disk
└─sdb1 8:17 0 931.5G 0 part
sdc 8:32 0 1.8T 0 disk
└─sdc1 8:33 0 1.8T 0 part /mnt/storageran
smartctl --all /dev/<device> > smart.outper harddrive:
sda:
russell-server% sudo smartctl --all /dev/sda > sda.out
russell-server% cat sda.out
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.12.0-1-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.9
Device Model: ST3160811AS
Serial Number: 6PT5P4WZ
Firmware Version: 3.AAE
User Capacity: 160,040,803,840 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Sat Nov 16 13:32:46 2013 SAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 090 006 Pre-fail Always - 163744227
3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1000
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail Always - 744116533
9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 32820
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1096
187 Reported_Uncorrect 0x0032 092 092 000 Old_age Always - 8
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 065 051 045 Old_age Always - 35 (Min/Max 33/35)
194 Temperature_Celsius 0x0022 035 049 000 Old_age Always - 35 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 069 045 000 Old_age Always - 75074513
197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967295
198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967295
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 4859 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4859 occurred at disk power-on lifetime: 32819 hours (1367 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 6e 96 a1 e2
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 6e 96 a1 e2 00 04:37:49.675 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 6e 96 a1 e0 00 04:37:49.603 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 6e 96 a1 e2 00 04:37:47.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 6e 96 a1 e0 00 04:37:47.079 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 01 6e 96 a1 e2 00 04:37:47.033 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 4858 occurred at disk power-on lifetime: 32819 hours (1367 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 6e 96 a1 e2
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 6e 96 a1 e2 00 04:37:49.675 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 6e 96 a1 e0 00 04:37:49.603 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 6e 96 a1 e2 00 04:37:47.702 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 af 9e a1 e0 00 04:37:47.079 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 01 af 9e a1 e0 00 04:37:47.033 READ MULTIPLE EXT
Error 4857 occurred at disk power-on lifetime: 32806 hours (1366 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 6e 96 a1 e2
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 6e 96 a1 e2 00 04:28:07.943 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 6e 96 a1 e0 00 04:28:07.718 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 6e 96 a1 e2 00 04:28:07.656 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 6e 96 a1 e0 00 04:28:05.574 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 01 6e 96 a1 e2 00 04:28:05.515 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 4856 occurred at disk power-on lifetime: 32806 hours (1366 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 6e 96 a1 e2
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 6e 96 a1 e2 00 04:28:02.150 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 6e 96 a1 e0 00 04:28:01.231 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 6e 96 a1 e2 00 04:28:01.231 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 af 9e a1 e0 00 04:28:05.574 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 01 af 9e a1 e0 00 04:28:05.515 READ MULTIPLE EXT
Error 4855 occurred at disk power-on lifetime: 32801 hours (1366 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 6e 96 a1 e2
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 6e 96 a1 e2 00 08:16:52.078 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 6e 96 a1 e0 00 08:16:52.010 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 6e 96 a1 e2 00 08:16:50.057 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 6e 96 a1 e0 00 08:16:49.290 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 01 6e 96 a1 e2 00 08:16:49.247 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 32802 -
# 2 Short offline Completed without error 00% 32801 -
# 3 Short offline Completed without error 00% 17765 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
russell-server%sdb:
russell-server% sudo smartctl --all /dev/sdb > sdb.out
russell-server% cat sdb.out
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.12.0-1-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE2-GP
Device Model: WDC WD1000FYPS-01ZKB0
Serial Number: WD-WCASJ1172116
LU WWN Device Id: 5 0014ee 2abb9c188
Firmware Version: 02.01B01
User Capacity: 1,000,203,804,160 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Sat Nov 16 13:33:40 2013 SAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (27960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 320) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 253 174 021 Pre-fail Always - 4275
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 170
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5778
10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 146
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 105
193 Load_Cycle_Count 0x0032 188 188 000 Old_age Always - 38003
194 Temperature_Celsius 0x0022 118 100 000 Old_age Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5776 -
# 2 Short offline Completed without error 00% 5771 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
russell-server%sdc:
russell-server% sudo smartctl --all /dev/sdc > sdc.out
russell-server% cat sdc.out
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.12.0-1-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF, SATA 6Gb/s)
Device Model: WDC WD20EARX-00PASB0
Serial Number: WD-WCAZAD562439
LU WWN Device Id: 5 0014ee 05859ce68
Firmware Version: 51.0AB51
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Nov 16 13:34:38 2013 SAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (38880) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 375) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3
3 Spin_Up_Time 0x0027 239 158 021 Pre-fail Always - 3016
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 826
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 12866
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 224
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 141
193 Load_Cycle_Count 0x0032 146 146 000 Old_age Always - 164822
194 Temperature_Celsius 0x0022 117 101 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 12845 2208103368
# 2 Short offline Completed: read failure 90% 12845 2208103368
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
russell-server%Last edited by jrussell (2013-11-16 11:40:13)
bitcoin: 1G62YGRFkMDwhGr5T5YGovfsxLx44eZo7U
Offline
#7 2013-11-16 18:29:08
- jrussell
- Member
- From: Cape Town, South Africa
- Registered: 2012-08-16
- Posts: 510
Re: random crash of PC (ata2 errors in journal)
Here is the journal when it happens
Nov 16 17:52:24 russell-server sshd[3254]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=lt49787.lagserv.info
Nov 16 17:52:27 russell-server sshd[3254]: Failed password for invalid user demo from 88.190.63.53 port 56283 ssh2
Nov 16 17:52:27 russell-server sshd[3254]: Received disconnect from 88.190.63.53: 11: Bye Bye [preauth]
Nov 16 17:52:29 russell-server sshd[3257]: Invalid user oracle from 88.190.63.53
Nov 16 17:52:29 russell-server sshd[3257]: input_userauth_request: invalid user oracle [preauth]
Nov 16 17:52:29 russell-server sshd[3257]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 16 17:52:29 russell-server sshd[3257]: pam_unix(sshd:auth): check pass; user unknown
Nov 16 17:52:29 russell-server sshd[3257]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=lt49787.lagserv.info
Nov 16 17:52:31 russell-server sshd[3257]: Failed password for invalid user oracle from 88.190.63.53 port 56557 ssh2
Nov 16 17:52:31 russell-server sshd[3257]: Received disconnect from 88.190.63.53: 11: Bye Bye [preauth]
Nov 16 17:52:33 russell-server sshd[3259]: Invalid user postgrest from 88.190.63.53
Nov 16 17:52:33 russell-server sshd[3259]: input_userauth_request: invalid user postgrest [preauth]
Nov 16 17:52:33 russell-server sshd[3259]: pam_tally(sshd:auth): pam_get_uid; no such user
Nov 16 17:52:33 russell-server sshd[3259]: pam_unix(sshd:auth): check pass; user unknown
Nov 16 17:52:33 russell-server sshd[3259]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=lt49787.lagserv.info
Nov 16 17:52:35 russell-server sshd[3259]: Failed password for invalid user postgrest from 88.190.63.53 port 56794 ssh2
Nov 16 17:52:35 russell-server sshd[3259]: Received disconnect from 88.190.63.53: 11: Bye Bye [preauth]
Nov 16 17:55:08 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Nov 16 17:55:08 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Offline uncorrectable sectors
Nov 16 18:01:01 russell-server crond[3344]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 16 18:01:01 russell-server CROND[3345]: (root) CMD (run-parts /etc/cron.hourly)
Nov 16 18:01:01 russell-server CROND[3344]: pam_unix(crond:session): session closed for user root
Nov 16 18:25:07 russell-server smartd[169]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 64 to 63
Nov 16 18:25:07 russell-server smartd[169]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 36 to 37
Nov 16 18:25:07 russell-server smartd[169]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 55 to 53
Nov 16 18:25:08 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Nov 16 18:25:08 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Offline uncorrectable sectors
Nov 16 18:55:07 russell-server smartd[169]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 63 to 64
Nov 16 18:55:07 russell-server smartd[169]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 37 to 36
Nov 16 18:55:07 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Nov 16 18:55:07 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Offline uncorrectable sectors
Nov 16 19:01:01 russell-server crond[3889]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 16 19:01:01 russell-server CROND[3890]: (root) CMD (run-parts /etc/cron.hourly)
Nov 16 19:01:01 russell-server CROND[3889]: pam_unix(crond:session): session closed for user root
Nov 16 19:25:07 russell-server smartd[169]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 64 to 63
Nov 16 19:25:07 russell-server smartd[169]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 36 to 37
Nov 16 19:25:08 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Nov 16 19:25:08 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Offline uncorrectable sectors
Nov 16 19:35:46 russell-server murmurd[255]: <W>2013-11-16 19:35:46.915 1 => <9:avoided(-1)> Connection closed: The remote host closed the connection [1]
Nov 16 19:35:49 russell-server murmurd[255]: <W>2013-11-16 19:35:49.064 1 => <13:(-1)> New connection: 105.236.150.144:54958
Nov 16 19:35:49 russell-server murmurd[255]: <W>2013-11-16 19:35:49.347 1 => <13:(-1)> Client version 1.2.4 (Win: 1.2.4)
Nov 16 19:35:49 russell-server murmurd[255]: <W>2013-11-16 19:35:49.399 1 => <13:avoided(-1)> Authenticated
Nov 16 19:53:33 russell-server murmurd[255]: <W>2013-11-16 19:53:33.536 1 => <12:baden(-1)> Connection closed: The remote host closed the connection [1]
Nov 16 19:54:00 russell-server murmurd[255]: <W>2013-11-16 19:54:00.049 1 => <11:Jason-iPad(-1)> Connection closed: The remote host closed the connection [1]
Nov 16 19:54:00 russell-server murmurd[255]: <W>2013-11-16 19:54:00.101 1 => CELT codec switch ffffffff8000000b ffffffff80000010 (prefer ffffffff80000010) (Opus 1)
Nov 16 19:55:07 russell-server smartd[169]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 118 to 113
Nov 16 19:55:07 russell-server smartd[169]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 53 to 52
Nov 16 19:55:07 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Nov 16 19:55:07 russell-server smartd[169]: Device: /dev/sdc [SAT], 1 Offline uncorrectable sectors
Nov 16 19:55:07 russell-server smartd[169]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 109 to 107
Nov 16 19:56:31 russell-server murmurd[255]: <W>2013-11-16 19:56:31.625 1 => <8:Jason(-1)> Connection closed: The remote host closed the connection [1]
Nov 16 19:57:02 russell-server murmurd[255]: <W>2013-11-16 19:57:02.629 1 => <14:(-1)> New connection: 41.13.208.60:35279
Nov 16 19:57:02 russell-server murmurd[255]: <W>2013-11-16 19:57:02.929 1 => <14:(-1)> Connection closed: The remote host closed the connection [1]
Nov 16 19:57:03 russell-server murmurd[255]: <W>2013-11-16 19:57:03.087 1 => <15:(-1)> New connection: 41.13.208.60:35281
Nov 16 19:57:03 russell-server murmurd[255]: <W>2013-11-16 19:57:03.470 1 => <15:(-1)> Client version 1.2.4 (iPhone OS: Mumble for iOS 1.2.2)
Nov 16 19:57:03 russell-server murmurd[255]: <W>2013-11-16 19:57:03.522 1 => <15:Rob iPhone(-1)> Rejected connection: Invalid username
Nov 16 19:57:03 russell-server murmurd[255]: <W>2013-11-16 19:57:03.574 1 => <15:Rob iPhone(-1)> Connection closed: [-1]
Nov 16 20:01:01 russell-server crond[4520]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 16 20:01:01 russell-server CROND[4521]: (root) CMD (run-parts /etc/cron.hourly)
Nov 16 20:01:01 russell-server CROND[4520]: pam_unix(crond:session): session closed for user root
-- Reboot --
Nov 16 20:22:20 russell-server systemd-journal[94]: Runtime journal is using 544.0K (max 150.7M, leaving 226.0M of free 1.4G, current limit 150.7M).
Nov 16 20:22:20 russell-server systemd-journal[94]: Runtime journal is using 548.0K (max 150.7M, leaving 226.0M of free 1.4G, current limit 150.7M).
Nov 16 20:22:20 russell-server kernel: Initializing cgroup subsys cpuset
Nov 16 20:22:20 russell-server kernel: Initializing cgroup subsys cpu
Nov 16 20:22:20 russell-server kernel: Initializing cgroup subsys cpuacct
Nov 16 20:22:20 russell-server kernel: Linux version 3.12.0-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Wed Nov 6 09:06:27 CET 2013
Nov 16 20:22:20 russell-server kernel: Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda2 rw initrd=../initramfs-linux.img
Nov 16 20:22:20 russell-server kernel: e820: BIOS-provided physical RAM map:
Nov 16 20:22:20 russell-server kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
Nov 16 20:22:20 russell-server kernel: BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
Nov 16 20:22:20 russell-server kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Nov 16 20:22:20 russell-server kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bffeffff] usable
Nov 16 20:22:20 russell-server kernel: BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfff2fff] ACPI NVS
Nov 16 20:22:20 russell-server kernel: BIOS-e820: [mem 0x00000000bfff3000-0x00000000bfffffff] ACPI data
Nov 16 20:22:20 russell-server kernel: BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
Nov 16 20:22:20 russell-server kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reservedhad to hold down power button, no keyboard lights respond, no signal from monitor. help 
bitcoin: 1G62YGRFkMDwhGr5T5YGovfsxLx44eZo7U
Offline
#8 2013-11-17 00:09:55
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,178
Re: random crash of PC (ata2 errors in journal)
I wouldn't trust sda or sdc. sdb looks OK. [Note: Could be cable or could be disks. Probably the disk for sdc since it can't complete the tests which, as far as I know, run autonomously once started? Not sure about this.]
Last edited by cfr (2013-11-17 00:11:30)
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
#9 2013-11-17 05:07:30
- x33a
- Forum Fellow
- Registered: 2009-08-15
- Posts: 4,587
Re: random crash of PC (ata2 errors in journal)
Wow, your sda is the oldest working drive I have seen. 32800 hours!!
While the scans passed for sda, the logs show some errors just a few hours earlier. So it was most likely this drive giving the errors. Also, it is super old, so you might want to replace it on time.
As cfr said, sdb looks fine.
As for sdc, while it is old, and the scans failed in its case, you might want to try a new cable for that drive, and run the scans again to see what happens. If the scans still fail, it might be on its way out too.
Offline
#10 2013-11-17 12:56:28
- jrussell
- Member
- From: Cape Town, South Africa
- Registered: 2012-08-16
- Posts: 510
Re: random crash of PC (ata2 errors in journal)
haha, I guess Ill replace sda then 
any chance ata2 is referring to the sata port used on the motherborad? or is it ata version 2 or something?
Also, considering that my whole PC locks up, could I assume that its sda or sda's cable (which is root) causing the problem? (ie would any other drive cause a complete lockup?) I could try mounting everything else with noauto perhaps?
And thanks a lot for the help
bitcoin: 1G62YGRFkMDwhGr5T5YGovfsxLx44eZo7U
Offline
#11 2013-11-17 23:05:03
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,178
Re: random crash of PC (ata2 errors in journal)
Well there's a problem with both sda and sdc (whether the drive itself or the cable). The tests smart runs should complete without issue. I'm not certain how the tests work but I thought they pretty much ran independently once triggered and so wouldn't rely on the cable connection. But I could very well be wrong about that.
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
#12 2013-11-18 08:57:05
- x33a
- Forum Fellow
- Registered: 2009-08-15
- Posts: 4,587
Re: random crash of PC (ata2 errors in journal)
jrussell wrote:
haha, I guess Ill replace sda then
Yeah, ata2 refers to the sata port.
Also, considering that my whole PC locks up, could I assume that its sda or sda's cable (which is root) causing the problem? (ie would any other drive cause a complete lockup?) I could try mounting everything else with noauto perhaps?
Since root was installed on sda, the lockups were probably due to this.
Also, do try changing the cables for sdc (or try changing the port), and run the test again on that drive. If it still fails, then you have a problem.
Offline
#13 2013-11-26 15:58:16
- jrussell
- Member
- From: Cape Town, South Africa
- Registered: 2012-08-16
- Posts: 510
Re: random crash of PC (ata2 errors in journal)
Well I replaced the cable for sdb which was plugged into sata2 on the motherboard and haven't had any problems since. I think it was the cable then.
Thanks for the help
bitcoin: 1G62YGRFkMDwhGr5T5YGovfsxLx44eZo7U
Offline