You are not logged in.

#1 2013-11-20 23:00:26

halimbo
Member
From: Krefeld, Germany
Registered: 2013-10-23
Posts: 74

Dual Monitor Setup

Hi,
I'm a bit confused about xrandr.
I've got a Laptop and a Monitor which I plug in vie VGA.
I want to have a "logical screen" which contains both physical displays.
The clue is that the screens have different resolutins.

VGA1 ; 1920x1080
LVDS1 : 1024x768

The command lines i try look this way:

 xrandr --output LVDS --mode 1024x768 --output VGA1 --mode 1920x1080 --left-of LVDS1 

It worked with Openbox an hour or so, but since then xrandr gives me this error:

xrandr: Configure crtc 1 failed

When I set the VGA output to 1024x768 it works, but it's very ugly that way.
Hope you can help me

My xrandr output:

Screen 0: minimum 320 x 200, current 2048 x 1080, maximum 32767 x 32767
LVDS1 connected 1024x768+1024+0 (normal left inverted right x axis y axis) 30 x 228mm
   1024x768       60.0*+
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm268mm
   1920x1080      60.0*+
   1600x1200      60.0  
   1680x1050      60.0  
   1280x1024      60.0  
   1440x900       59.9  
   1280x960       60.0  
   1280x720       60.0  
   1024x768       60.0  
   800x600        60.3  
   640x480        60.0  
   720x400        70.1  
TV1 unknown connection (normal left inverted right x axis y axis)
   848x480        59.9 +
   640x480        59.9 +
   1024x768       59.9  
   800x600        59.9  

Offline

#2 2013-11-24 02:43:15

halimbo
Member
From: Krefeld, Germany
Registered: 2013-10-23
Posts: 74

Re: Dual Monitor Setup

It works now, when one screen is below the other but not side by side...
I guess it has something to do with the virtual screen, but I'm no sure how to set it up right, my try did'nt work:
I tried it with this configuration file:

/etc/X11/xorg.conf.d/20-screen.conf
Section "Screen"
       Identifier "Default Screen"
       Device "Intel Graphics"
       Monitor "LVDS1"
       Subsection "Display"
               Virtual 4000 4000
       EndSubsection
EndSection

"Intel Graphics" is initialized in another conf-file and the name for the monitor matches, too.

Offline

Board footer

Powered by FluxBB