You are not logged in.

#1 2013-11-23 11:15:31

Mr. Alex
Member
Registered: 2010-08-26
Posts: 623

New version of IceWM malfunction

Hello all.

Installed new version of IceWM (v1.3.8) and the window of functions stopped working (the one that contains buttons of windows' list, buttons of rebooting and shutting down and exiting IceWM session, etc...). Now when I call this window, it appears. But no matter what button I press, the window just closes doing nothing. No button works. Asked the developer (Marko Macek) and he replied that the version of IceWM compiled for Arch might require the config file be in the system rather than in home dir, so I copied my config to "/usr/local/share/icewm" and it did nothing to the issue. Please help me to fix it.

Offline

#2 2013-11-23 13:19:37

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: New version of IceWM malfunction

Are you sure that's the right directory? System configs usually go in /etc. That also sounds like an odd explanation - is he saying that user configs under $HOME no longer work?

BTW I don't use icewm, just curious.

Offline

#3 2013-11-23 17:08:20

Mr. Alex
Member
Registered: 2010-08-26
Posts: 623

Re: New version of IceWM malfunction

Tomk, I was trying out "/usr/local/share/icewm" because I read about it here: http://www.icewm.org/FAQ/IceWM-FAQ-4.html :

Where are the configuration files?

You could not find the config files? Maybe you were looking in wrong places - the location depends upon the method you used to install IceWM.

In a plain vanilla source install, the global version of the files will be located in /usr/local/share/icewm.

As for Marko Macek, he didn't exactly say $HOME config files don't work (they work, by the way, the only problem is with that window I was talking about). His explaination:

Marko wrote:

Most likelly it's a configuration issue. You most likely had an Arch distribution of icewm which had all the action configured properly to work on Arch. Most likely, the defaults (LogoutCommand, ShutdownCommand, RebootCommand, ...) should be seen in the default (system) icewm preferences file of the original icewm version.

And http://www.icewm.org/FAQ/IceWM-FAQ-4.html suggests that "default (system) icewm preferences file" is "/usr/local/share/icewm".

Does anyone who uses IceWM have the same problem here?

Offline

#4 2013-11-23 17:32:27

metak
Member
Registered: 2009-09-27
Posts: 199

Re: New version of IceWM malfunction

Arch icewm package puts config files in /usr/share/icewm. Here you'll find files -- keys, menu, preferences, toolbar and winoptions.
You should copy those files to your home folder ~/.icewm directory. After that you can edit these files in home directory to suit your needs.

This works for me with new version of icewm as it worked before.

Last edited by metak (2013-11-23 17:34:00)

Offline

#5 2013-11-23 18:22:01

Mr. Alex
Member
Registered: 2010-08-26
Posts: 623

Re: New version of IceWM malfunction

Is it necessary to redo all the setings again? (Any changes there in IceWM?) I already have all those files configured and have been using my config for several years now.

Offline

#6 2013-11-23 21:57:28

metak
Member
Registered: 2009-09-27
Posts: 199

Re: New version of IceWM malfunction

Mr. Alex wrote:

Is it necessary to redo all the setings again? (Any changes there in IceWM?) I already have all those files configured and have been using my config for several years now.

As far as I know changelog for this version 1.3.8 says that there were some minor fixes so I don't see why your config files wouldn't work. Mine work just fine.

 	1.3.8pre1: 2011-11-19
 	- fix focus issues with JDK7

That's all I could find on project website anyway.  :-)

Offline

#7 2013-11-24 03:56:05

Mektub
Member
From: Lisbon /Portugal
Registered: 2008-01-02
Posts: 647

Re: New version of IceWM malfunction

Mr. Alex wrote:

Hello all.

Installed new version of IceWM (v1.3.8) and the window of functions stopped working (the one that contains buttons of windows' list, buttons of rebooting and shutting down and exiting IceWM session, etc...). Now when I call this window, it appears. But no matter what button I press, the window just closes doing nothing. No button works. Asked the developer (Marko Macek) and he replied that the version of IceWM compiled for Arch might require the config file be in the system rather than in home dir, so I copied my config to "/usr/local/share/icewm" and it did nothing to the issue. Please help me to fix it.

In the sense above, I don't see any difference  using 1.3.8. My configuration files reside at $HOME/.icewm. There are some at /usr/share/icewm, but I didn't touch them.

Mr.Alex, I suggest you open a brand new user just for testing purposes.

The problem I have with all the icewm versions above 1.7.1, I reported it here:

https://bbs.archlinux.org/viewtopic.php?id=173222

It must be a strange problem indeed. It doesn't show up in version icewm 1.3.7 in debian, but I compiled the debian version and it shows up under Arch. Well, it's a minor problem.


Mektub


Follow me on twitter: https://twitter.com/johnbina

Offline

#8 2013-11-24 06:03:19

Mr. Alex
Member
Registered: 2010-08-26
Posts: 623

Re: New version of IceWM malfunction

Mektub, created new user, copied my IceWM config there and started it. Firefox runs with GTK3 now (what a change...). But IceWM window of functions still doesn't work. No changes there.

Offline

#9 2013-11-24 07:02:26

Mektub
Member
From: Lisbon /Portugal
Registered: 2008-01-02
Posts: 647

Re: New version of IceWM malfunction

Mr. Alex,

let me double check, by "and the window of functions stopped working" do you mean the menu bar on the left ?

http://i1237.photobucket.com/albums/ff4 … enshot.png

Mektub

Last edited by Mektub (2013-11-24 07:02:50)


Follow me on twitter: https://twitter.com/johnbina

Offline

#10 2013-11-24 08:26:22

Mr. Alex
Member
Registered: 2010-08-26
Posts: 623

Re: New version of IceWM malfunction

No. Open your "preferences" file and look for "KeySysDialog" option. For me it's

KeySysDialog="Super+Del"

Pops up a window with eight buttons. When I click any button in this window, the window closes with no action.

Offline

#11 2013-11-24 08:54:30

Mektub
Member
From: Lisbon /Portugal
Registered: 2008-01-02
Posts: 647

Re: New version of IceWM malfunction

I have been using icewm since ages now, and I had never noticed the "KeySysDialog" option.

Well, I do now.

I have my desktop with icewm 1.7.1 and a VirtualBox with Arch and icewm 1.8.1.

In both "KeySysDialog" works, (I tried 'about', 'Windows List'  and 'restart').

Lock, Reboot and Shutdown are greyed out on both icewm versions, but possibly that's normal.

My Arch distributions are fully updated.

Sorry I can't help you.

Mektub


Follow me on twitter: https://twitter.com/johnbina

Offline

#12 2013-11-24 09:43:29

Mr. Alex
Member
Registered: 2010-08-26
Posts: 623

Re: New version of IceWM malfunction

Mektub wrote:

Lock, Reboot and Shutdown are greyed out on both icewm versions, but possibly that's normal.

That is. You just gotta set commands for those actions in "preferences" file. Most of the times I use this window to lock screen. But sometimes for shutting down and rebooting.

[whine]Every single piece of software these days updates for worse.[/whine]

Offline

#13 2013-11-24 12:38:42

Mr. Alex
Member
Registered: 2010-08-26
Posts: 623

Re: New version of IceWM malfunction

Mektub wrote:

I have my desktop with icewm 1.7.1 and a VirtualBox with Arch and icewm 1.8.1.

In both "KeySysDialog" works, (I tried 'about', 'Windows List'  and 'restart').

What about the very recent v1.3.8? Have you tried it in this version?

P. S. What's this v1.8.1? IceWM hasn't yet come to such a number...

Offline

#14 2013-11-24 13:43:43

Mektub
Member
From: Lisbon /Portugal
Registered: 2008-01-02
Posts: 647

Re: New version of IceWM malfunction

Sorry, mistyped:

extra/icewm 1.3.8-1 [installed: 1.3.7-1] 

Mektub


Follow me on twitter: https://twitter.com/johnbina

Offline

Board footer

Powered by FluxBB