You are not logged in.

#1 2013-06-05 05:17:41

is0lated
Member
Registered: 2013-02-06
Posts: 6

Pulse audio and snd_hda_intel

I'm currently trying to get pulse audio to work after giving up on it a while ago. The problem I'm having is that when watching a video, if I don't move the mouse almost constantly the video stops, the audio loops the last second or so, and I get the following errors

E: [alsa-source] alsa-util.c: snd_pcm_avail() returned a value that is exceptionally large: 2710236 bytes (15364 ms).
E: [alsa-source] alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
E: [alsa-source] alsa-util.c: snd_pcm_dump():
E: [alsa-source] alsa-util.c: Hardware PCM card 0 'HDA ATI SB' device 0 subdevice 0
E: [alsa-source] alsa-util.c: Its setup is:
E: [alsa-source] alsa-util.c:   stream       : CAPTURE
E: [alsa-source] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-source] alsa-util.c:   format       : S16_LE
E: [alsa-source] alsa-util.c:   subformat    : STD
E: [alsa-source] alsa-util.c:   channels     : 2
E: [alsa-source] alsa-util.c:   rate         : 44100
E: [alsa-source] alsa-util.c:   exact rate   : 44100 (44100/1)
E: [alsa-source] alsa-util.c:   msbits       : 16
E: [alsa-source] alsa-util.c:   buffer_size  : 88192
E: [alsa-source] alsa-util.c:   period_size  : 44096
E: [alsa-source] alsa-util.c:   period_time  : 999909
E: [alsa-source] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-source] alsa-util.c:   period_step  : 1
E: [alsa-source] alsa-util.c:   avail_min    : 44096
E: [alsa-source] alsa-util.c:   period_event : 0
E: [alsa-source] alsa-util.c:   start_threshold  : -1
E: [alsa-source] alsa-util.c:   stop_threshold   : 6205960286516543488
E: [alsa-source] alsa-util.c:   silence_threshold: 0
E: [alsa-source] alsa-util.c:   silence_size : 0
E: [alsa-source] alsa-util.c:   boundary     : 6205960286516543488
E: [alsa-source] alsa-util.c:   appl_ptr     : 2239466
E: [alsa-source] alsa-util.c:   hw_ptr       : 2917025
E: [alsa-sink] alsa-util.c: snd_pcm_delay() returned a value that is exceptionally large: -2400992 bytes (-13611 ms).
E: [alsa-sink] alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
E: [alsa-sink] alsa-util.c: snd_pcm_dump():
E: [alsa-sink] alsa-util.c: Hooks PCM
E: [alsa-sink] alsa-util.c: Its setup is:
E: [alsa-sink] alsa-util.c:   stream       : PLAYBACK
E: [alsa-sink] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-sink] alsa-util.c:   format       : S16_LE
E: [alsa-sink] alsa-util.c:   subformat    : STD
E: [alsa-sink] alsa-util.c:   channels     : 2
E: [alsa-sink] alsa-util.c:   rate         : 44100
E: [alsa-sink] alsa-util.c:   exact rate   : 44100 (44100/1)
E: [alsa-sink] alsa-util.c:   msbits       : 16
E: [alsa-sink] alsa-util.c:   buffer_size  : 88192
E: [alsa-sink] alsa-util.c:   period_size  : 44096
E: [alsa-sink] alsa-util.c:   period_time  : 999909
E: [alsa-sink] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-sink] alsa-util.c:   period_step  : 1
E: [alsa-sink] alsa-util.c:   avail_min    : 85283
E: [alsa-sink] alsa-util.c:   period_event : 0
E: [alsa-sink] alsa-util.c:   start_threshold  : -1
E: [alsa-sink] alsa-util.c:   stop_threshold   : 6205960286516543488
E: [alsa-sink] alsa-util.c:   silence_threshold: 0
E: [alsa-sink] alsa-util.c:   silence_size : 0
E: [alsa-sink] alsa-util.c:   boundary     : 6205960286516543488
E: [alsa-sink] alsa-util.c: Slave: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
E: [alsa-sink] alsa-util.c: Its setup is:
E: [alsa-sink] alsa-util.c:   stream       : PLAYBACK
E: [alsa-sink] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-sink] alsa-util.c:   format       : S16_LE
E: [alsa-sink] alsa-util.c:   subformat    : STD
E: [alsa-sink] alsa-util.c:   channels     : 2
E: [alsa-sink] alsa-util.c:   rate         : 44100
E: [alsa-sink] alsa-util.c:   exact rate   : 44100 (44100/1)
E: [alsa-sink] alsa-util.c:   msbits       : 16
E: [alsa-sink] alsa-util.c:   buffer_size  : 88192
E: [alsa-sink] alsa-util.c:   period_size  : 44096
E: [alsa-sink] alsa-util.c:   period_time  : 999909
E: [alsa-sink] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-sink] alsa-util.c:   period_step  : 1
E: [alsa-sink] alsa-util.c:   avail_min    : 85283
E: [alsa-sink] alsa-util.c:   period_event : 0
E: [alsa-sink] alsa-util.c:   start_threshold  : -1
E: [alsa-sink] alsa-util.c:   stop_threshold   : 6205960286516543488
E: [alsa-sink] alsa-util.c:   silence_threshold: 0
E: [alsa-sink] alsa-util.c:   silence_size : 0
E: [alsa-sink] alsa-util.c:   boundary     : 6205960286516543488
E: [alsa-sink] alsa-util.c:   appl_ptr     : 8835939
E: [alsa-sink] alsa-util.c:   hw_ptr       : 9436187
E: [alsa-source] alsa-util.c: snd_pcm_avail() returned a value that is exceptionally large: 7186620 bytes (40740 ms).
E: [alsa-source] alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
E: [alsa-source] alsa-util.c: snd_pcm_dump():
E: [alsa-source] alsa-util.c: Hardware PCM card 0 'HDA ATI SB' device 0 subdevice 0
E: [alsa-source] alsa-util.c: Its setup is:
E: [alsa-source] alsa-util.c:   stream       : CAPTURE
E: [alsa-source] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-source] alsa-util.c:   format       : S16_LE
E: [alsa-source] alsa-util.c:   subformat    : STD
E: [alsa-source] alsa-util.c:   channels     : 2
E: [alsa-source] alsa-util.c:   rate         : 44100
E: [alsa-source] alsa-util.c:   exact rate   : 44100 (44100/1)
E: [alsa-source] alsa-util.c:   msbits       : 16
E: [alsa-source] alsa-util.c:   buffer_size  : 88192
E: [alsa-source] alsa-util.c:   period_size  : 44096
E: [alsa-source] alsa-util.c:   period_time  : 999909
E: [alsa-source] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-source] alsa-util.c:   period_step  : 1
E: [alsa-source] alsa-util.c:   avail_min    : 44096
E: [alsa-source] alsa-util.c:   period_event : 0
E: [alsa-source] alsa-util.c:   start_threshold  : -1
E: [alsa-source] alsa-util.c:   stop_threshold   : 6205960286516543488
E: [alsa-source] alsa-util.c:   silence_threshold: 0
E: [alsa-source] alsa-util.c:   silence_size : 0
E: [alsa-source] alsa-util.c:   boundary     : 6205960286516543488
E: [alsa-source] alsa-util.c:   appl_ptr     : 3799527
E: [alsa-source] alsa-util.c:   hw_ptr       : 5596182
[matthew@Davlin ~]$ pulseaudio 
[matthew@Davlin ~]$ pulseaudio 
[matthew@Davlin ~]$ pulseaudio 
[matthew@Davlin ~]$ pulseaudio 
E: [alsa-sink] alsa-util.c: snd_pcm_avail() returned a value that is exceptionally large: 2636172 bytes (14944 ms).
E: [alsa-sink] alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
E: [alsa-sink] alsa-util.c: snd_pcm_dump():
E: [alsa-sink] alsa-util.c: Soft volume PCM
E: [alsa-sink] alsa-util.c: Control: PCM Playback Volume
E: [alsa-sink] alsa-util.c: min_dB: -51
E: [alsa-sink] alsa-util.c: max_dB: 0
E: [alsa-sink] alsa-util.c: resolution: 256
E: [alsa-sink] alsa-util.c: Its setup is:
E: [alsa-sink] alsa-util.c:   stream       : PLAYBACK
E: [alsa-sink] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-sink] alsa-util.c:   format       : S16_LE
E: [alsa-sink] alsa-util.c:   subformat    : STD
E: [alsa-sink] alsa-util.c:   channels     : 2
E: [alsa-sink] alsa-util.c:   rate         : 44100
E: [alsa-sink] alsa-util.c:   exact rate   : 44100 (44100/1)
E: [alsa-sink] alsa-util.c:   msbits       : 16
E: [alsa-sink] alsa-util.c:   buffer_size  : 88192
E: [alsa-sink] alsa-util.c:   period_size  : 44096
E: [alsa-sink] alsa-util.c:   period_time  : 999909
E: [alsa-sink] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-sink] alsa-util.c:   period_step  : 1
E: [alsa-sink] alsa-util.c:   avail_min    : 81975
E: [alsa-sink] alsa-util.c:   period_event : 0
E: [alsa-sink] alsa-util.c:   start_threshold  : -1
E: [alsa-sink] alsa-util.c:   stop_threshold   : 6205960286516543488
E: [alsa-sink] alsa-util.c:   silence_threshold: 0
E: [alsa-sink] alsa-util.c:   silence_size : 0
E: [alsa-sink] alsa-util.c:   boundary     : 6205960286516543488
E: [alsa-sink] alsa-util.c: Slave: Hardware PCM card 0 'HDA ATI SB' device 0 subdevice 0
E: [alsa-sink] alsa-util.c: Its setup is:
E: [alsa-sink] alsa-util.c:   stream       : PLAYBACK
E: [alsa-sink] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-sink] alsa-util.c:   format       : S16_LE
E: [alsa-sink] alsa-util.c:   subformat    : STD
E: [alsa-sink] alsa-util.c:   channels     : 2
E: [alsa-sink] alsa-util.c:   rate         : 44100
E: [alsa-sink] alsa-util.c:   exact rate   : 44100 (44100/1)
E: [alsa-sink] alsa-util.c:   msbits       : 16
E: [alsa-sink] alsa-util.c:   buffer_size  : 88192
E: [alsa-sink] alsa-util.c:   period_size  : 44096
E: [alsa-sink] alsa-util.c:   period_time  : 999909
E: [alsa-sink] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-sink] alsa-util.c:   period_step  : 1
E: [alsa-sink] alsa-util.c:   avail_min    : 81975
E: [alsa-sink] alsa-util.c:   period_event : 0
E: [alsa-sink] alsa-util.c:   start_threshold  : -1
E: [alsa-sink] alsa-util.c:   stop_threshold   : 6205960286516543488
E: [alsa-sink] alsa-util.c:   silence_threshold: 0
E: [alsa-sink] alsa-util.c:   silence_size : 0
E: [alsa-sink] alsa-util.c:   boundary     : 6205960286516543488
E: [alsa-sink] alsa-util.c:   appl_ptr     : 18310183
E: [alsa-sink] alsa-util.c:   hw_ptr       : 18881034
E: [alsa-sink] alsa-util.c: snd_pcm_delay() returned a value that is exceptionally large: -1918612 bytes (-10876 ms).
E: [alsa-sink] alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
E: [alsa-sink] alsa-util.c: snd_pcm_dump():
E: [alsa-sink] alsa-util.c: Hooks PCM
E: [alsa-sink] alsa-util.c: Its setup is:
E: [alsa-sink] alsa-util.c:   stream       : PLAYBACK
E: [alsa-sink] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-sink] alsa-util.c:   format       : S16_LE
E: [alsa-sink] alsa-util.c:   subformat    : STD
E: [alsa-sink] alsa-util.c:   channels     : 2
E: [alsa-sink] alsa-util.c:   rate         : 44100
E: [alsa-sink] alsa-util.c:   exact rate   : 44100 (44100/1)
E: [alsa-sink] alsa-util.c:   msbits       : 16
E: [alsa-sink] alsa-util.c:   buffer_size  : 88192
E: [alsa-sink] alsa-util.c:   period_size  : 44096
E: [alsa-sink] alsa-util.c:   period_time  : 999909
E: [alsa-sink] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-sink] alsa-util.c:   period_step  : 1
E: [alsa-sink] alsa-util.c:   avail_min    : 79109
E: [alsa-sink] alsa-util.c:   period_event : 0
E: [alsa-sink] alsa-util.c:   start_threshold  : -1
E: [alsa-sink] alsa-util.c:   stop_threshold   : 6205960286516543488
E: [alsa-sink] alsa-util.c:   silence_threshold: 0
E: [alsa-sink] alsa-util.c:   silence_size : 0
E: [alsa-sink] alsa-util.c:   boundary     : 6205960286516543488
E: [alsa-sink] alsa-util.c: Slave: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
E: [alsa-sink] alsa-util.c: Its setup is:
E: [alsa-sink] alsa-util.c:   stream       : PLAYBACK
E: [alsa-sink] alsa-util.c:   access       : MMAP_INTERLEAVED
E: [alsa-sink] alsa-util.c:   format       : S16_LE
E: [alsa-sink] alsa-util.c:   subformat    : STD
E: [alsa-sink] alsa-util.c:   channels     : 2
E: [alsa-sink] alsa-util.c:   rate         : 44100
E: [alsa-sink] alsa-util.c:   exact rate   : 44100 (44100/1)
E: [alsa-sink] alsa-util.c:   msbits       : 16
E: [alsa-sink] alsa-util.c:   buffer_size  : 88192
E: [alsa-sink] alsa-util.c:   period_size  : 44096
E: [alsa-sink] alsa-util.c:   period_time  : 999909
E: [alsa-sink] alsa-util.c:   tstamp_mode  : ENABLE
E: [alsa-sink] alsa-util.c:   period_step  : 1
E: [alsa-sink] alsa-util.c:   avail_min    : 79109
E: [alsa-sink] alsa-util.c:   period_event : 0
E: [alsa-sink] alsa-util.c:   start_threshold  : -1
E: [alsa-sink] alsa-util.c:   stop_threshold   : 6205960286516543488
E: [alsa-sink] alsa-util.c:   silence_threshold: 0
E: [alsa-sink] alsa-util.c:   silence_size : 0
E: [alsa-sink] alsa-util.c:   boundary     : 6205960286516543488
E: [alsa-sink] alsa-util.c:   appl_ptr     : 72105977
E: [alsa-sink] alsa-util.c:   hw_ptr       : 72585630

I tried blacklisting snd_hda_intel, and snd_hda_codec_hdmi (I don't have hdmi on my graphics card and so I decided I didn't need it) but without the snd_hda_intel module loaded pavucontrol only lists dummy output and dummy input.

The output of "lsmod | grep snd" after loading both snd_hda_intel and snd_hda_codec_hdmi is

snd_hda_intel          36136  10 
snd_hda_codec_hdmi     29938  1 
snd_hda_codec_realtek    31213  1 
snd_hda_codec         148200  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep               6492  1 snd_hda_codec
snd_pcm                78428  6 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc          7426  2 snd_pcm,snd_hda_intel
snd_timer              19007  1 snd_pcm
snd                    60141  24 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore               5514  1 snd

Any advice about what to do would be appreciated.

Offline

#2 2013-06-05 05:32:20

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,412

Re: Pulse audio and snd_hda_intel

Uuhhh... did you do what the output told you to do and ask the ALSA developers?

Offline

#3 2013-06-05 06:21:35

is0lated
Member
Registered: 2013-02-06
Posts: 6

Re: Pulse audio and snd_hda_intel

As of right now, no. I've been having this error for a while and have seen other people with the same thing so I naively thought this would have been reported by someone in the past. I'll try report it now.

It seems like the bug tracker at https://bugtrack.alsa-project.org/alsa-bug/ is unavailable to me at the moment, do you know if I have to join their mailing list to access it?

Offline

#4 2013-09-14 22:20:27

eri
Member
Registered: 2013-09-14
Posts: 4

Re: Pulse audio and snd_hda_intel

i have same overflow in pulse, but alsa driver still works, pulse crashes, machine not freezes.

pulse crashes with
E: [alsa-sink-ID 887 Analog] sink.c: Assertion 'max_latency <= (10*((pa_usec_t) 1000000ULL))' failed at pulsecore/sink.c:3196, function pa_sink_set_latency_range_within_thread(). Aborting.


from lspci
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
from lshw
  *-core
       description: Motherboard
       product: F2A55-M
       vendor: ASUSTeK COMPUTER INC.
....
        *-multimedia
             description: Audio device
             product: FCH Azalia Controller
             vendor: Advanced Micro Devices, Inc. [AMD]
             physical id: 14.2
             bus info: pci@0000:00:14.2
             version: 01
             width: 64 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             resources: irq:16 memory:fd200000-fd203fff

Offline

#5 2013-09-15 00:01:50

eri
Member
Registered: 2013-09-14
Posts: 4

Re: Pulse audio and snd_hda_intel

I have workaround for my pulse crashes.

copied from abs
makepkg --nobuild

in source
src/pulseaudio-4.0/src/pulsecore/source.c
src/pulseaudio-4.0/src/pulsecore/sink.c

replaced constant ABSOLUTE_MAX_LATENCY with
#define ABSOLUTE_MAX_LATENCY (50*PA_USEC_PER_SEC)

makepkg --noextract
then pacman -U *.pkg.tar.xz


maybe it breakes something later, but now works.

Offline

#6 2013-11-28 10:01:41

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

I want to try that too since I have the same issues (log output), but after the last step makepkg complains about missing dependencies 
  - >bluez-libs
  -> intltool
  -> lirc-utils
  -> check
Shouldn't these dependencies already be installed (because PA is already installed on my system)? Or am I simply missing something here?

It's really annoying because PA keeps crashing _every time_ now, help would be appreciated smile

Offline

#7 2014-01-15 07:42:08

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

Well, the issue still occurs on my system and I really don't know how to fix it.
Since it used to work with ALSA only (couple of years ago), I'm pretty sure that it's
somehow related to PA.
Nowadays it tends to crash when manually opening pavucontrol, and applications like
skype don't work at all (with a output similar to the OP's output:
alsa-util.c: snd_pcm_avail() returned a value that is exceptionally large: 7186620 bytes (40740 ms). [...]

Anyone ideas how to approach this? It's *really* annoying.

edit: Fyi, I've got this problem since I've installed arch on this system; I didn't have similar problems on gentoo back in the days.
Dunno if that's related though.

Offline

#8 2014-01-15 13:27:07

korn36
Member
Registered: 2014-01-14
Posts: 111

Re: Pulse audio and snd_hda_intel

I also have this issue. Literally, the same one. The cause seems to be pulse assigning a buffer size greater than the one supported. D: [alsa-source-ALC889A Analog] alsa-util.c: Maximum hw buffer size is 11888 ms.
This didn't happen on other distros.
I added this to /etc/pulse/daemon.conf and it seems to work right now, but pulse sometimes crashes or sound is choppy. Well, better than no sound:

default-sample-format = s32le
default-sample-rate = 44100
alternate-sample-rate = 48000
default-fragments = 2
default-fragment-size-msec = 80

As it didn't happen on Debian, I wonder if compiling Pulse from the Debian's source packages would fix it... Or maybe installing pulseaudio-git from AUR would help... I think that some Arch patches broke it.
BTW direct ALSA playback works fine.
EDIT: Yay, pulseaudio-git works... But I'm sure it will crash sooner or later.

EDIT2: Pulseaudio-git crashed. I'll try compiling pulseaudio-git with eri's patch.
EDIT3: With eri's patch it doesn't crash anymore. I launched audacity when playing music using deadbeef and it didn't crash. Thanks, Eri! Thens, you can download the patched package from here (It's pulseaudio-git with patched latency thing): http://ge.tt/7LCTIRE1/v/0

Last edited by korn36 (2014-01-15 14:40:17)

Offline

#9 2014-01-15 19:16:20

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

Thanks for the reply.

Well, firstly I've built the package myself.
Steps were basically:updating my ABS tree, copying PA from 'extra/pulseaudio' to home,
ran 'makepkg -o' in order to download the sources, patched the (2) files manually,
ran 'makepkg -e' and installed the 'libpulse' as well as the 'pulseaudio' package.
But apparently this hasn't changed PA's behaviour, it keeps crashing.

In a second attempt I've installed your package, but PA still  keeps crashing (I assume
that you've done more or less exactly the same).

It's really unfortunate, it kinda breaks the desktop for me atm.

edit: And please bear with me, I just recently switched to arch from gentoo and debian. smile

Offline

#10 2014-01-15 19:51:29

korn36
Member
Registered: 2014-01-14
Posts: 111

Re: Pulse audio and snd_hda_intel

thens wrote:

Thanks for the reply.

Well, firstly I've built the package myself.
Steps were basically:updating my ABS tree, copying PA from 'extra/pulseaudio' to home,
ran 'makepkg -o' in order to download the sources, patched the (2) files manually,
ran 'makepkg -e' and installed the 'libpulse' as well as the 'pulseaudio' package.
But apparently this hasn't changed PA's behaviour, it keeps crashing.

In a second attempt I've installed your package, but PA still  keeps crashing (I assume
that you've done more or less exactly the same).

It's really unfortunate, it kinda breaks the desktop for me atm.

edit: And please bear with me, I just recently switched to arch from gentoo and debian. smile

I've switched to Arch three days ago, I'm still a newbie. smile Have you removed libpulse when installing my package and deleting the directories ~/.config/pulse and ~/.pulse? And yes, I've done the same thing as you, but with pulseaudio-git.
You seem to get more latency than me (Yours is 40740ms, mine was around 10480ms, I don't remember exactly.). Try adding in that file not 50*PA_USEC_PER_SEC, but something higher like 150*PA_USEC_PER_SEC or even 300*PA_USEC_PER_SEC.

Last edited by korn36 (2014-01-15 20:05:11)

Offline

#11 2014-01-16 08:19:56

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

Yeah, I've compiled PA with a higher latency now and it seems to work for now smile
Now I have to figure out how to add my custom patch to the ABS, so that the patch will be
applied on every new update/upgrade of PA.
Thanks for the help btw.

edit: Nevermind, PA keeps crashing. Tried a lot of values (150, 300, 1000, 2000) but it keeps crashing (specifically if I start/invoke pavucontrol).
I'm currently appyling the patch to 'pulseaudio-git' from the AUR, like you did before, we'll see how this'll turns out.

Last edited by thens (2014-01-16 11:03:43)

Offline

#12 2014-01-16 13:23:49

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

Well, it still keeps crashing, even with 'pulseaudio-git' with (and without) the patch.
PA's log is not really that helpful, it keeps rewinding like crazy and after a very short while it crashed ("Killed").
Most of the time there's no useful output via journalctly available either.

Dunno really what to do here.

Offline

#13 2014-01-16 13:37:20

korn36
Member
Registered: 2014-01-14
Posts: 111

Re: Pulse audio and snd_hda_intel

Try adding this to /etc/pulse/daemon.conf:

default-fragments = 2
default-fragment-size-msec = 80
default-sample-format = s32le
default-sample-rate = 44100
alternate-sample-rate = 48000

Offline

#14 2014-01-16 14:02:39

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

Nope, already tried these settings (with your package, and the version(s) that I've compiled myself).
Either this 'rewinding' keeps on going indefinitely, or it rewinds and crashes after a couple of seconds (PA that is).
Small excerpt:

D: [alsa-sink-HDMI 0] source.c: Processing rewind...
D: [alsa-sink-HDMI 0] protocol-native.c: Requesting rewind due to rewrite.
D: [alsa-sink-HDMI 0] alsa-sink.c: Requested to rewind 352768 bytes.
D: [alsa-sink-HDMI 0] alsa-sink.c: Limited to 74284 bytes.
D: [alsa-sink-HDMI 0] alsa-sink.c: before: 18571
D: [alsa-sink-HDMI 0] alsa-sink.c: after: 17871
D: [alsa-sink-HDMI 0] alsa-sink.c: Rewound 71484 bytes.
D: [alsa-sink-HDMI 0] sink.c: Processing rewind...
D: [alsa-sink-HDMI 0] sink-input.c: Have to rewind 71484 bytes on render memblockq.
D: [alsa-sink-HDMI 0] sink-input.c: Have to rewind 142968 bytes on implementor.
D: [alsa-sink-HDMI 0] source.c: Processing rewind...
D: [alsa-sink-HDMI 0] protocol-native.c: Requesting rewind due to rewrite.
D: [alsa-sink-HDMI 0] alsa-sink.c: Requested to rewind 352768 bytes.
D: [alsa-sink-HDMI 0] alsa-sink.c: Limited to 76824 bytes.
D: [alsa-sink-HDMI 0] alsa-sink.c: before: 19206
D: [alsa-sink-HDMI 0] alsa-sink.c: after: 18558
D: [alsa-sink-HDMI 0] alsa-sink.c: Rewound 74232 bytes.
D: [alsa-sink-HDMI 0] sink.c: Processing rewind...
D: [alsa-sink-HDMI 0] sink-input.c: Have to rewind 74232 bytes on render memblockq.
D: [alsa-sink-HDMI 0] sink-input.c: Have to rewind 148464 bytes on implementor.
D: [alsa-sink-HDMI 0] source.c: Processing rewind...
Killed

PA will crash most of the time if I start pavucontrol. Here's the output via journalctl:

Jan 16 14:51:47 alpha kernel: pavucontrol[1716]: segfault at 7f4aebfff000 ip 00007f4afdfe8687 sp 00007fff6119c760 error 4 in libpulsecommon-4.0.so[7f4afdfb3000+71000]
Jan 16 14:51:47 alpha systemd-coredump[1719]: Process 1716 (pavucontrol) dumped core.

Offline

#15 2014-01-16 14:05:52

korn36
Member
Registered: 2014-01-14
Posts: 111

Re: Pulse audio and snd_hda_intel

I have no idea sad
D: [alsa-sink-HDMI 0] alsa-sink.c: Requested to rewind 352768 bytes.
D: [alsa-sink-HDMI 0] alsa-sink.c: Limited to 76824 bytes.
It seems that it wants to rewind more, but the buffer is too small to do it.
Try this in /etc/pulse/daemon.conf:

default-fragments = 4
default-fragment-size-msec = 400
default-sample-format = s16le

It will increase the buffer to 4 fragments, each of 400ms, giving you a 1600ms buffer.
If it didn't happen for you in other distros, it's probably a bug somewhere in one of Arch packages.

Last edited by korn36 (2014-01-16 14:12:57)

Offline

#16 2014-01-16 14:11:43

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

Btw. which package should be modified, the vanilla PA package or rather the patched one?

Offline

#17 2014-01-16 14:14:23

korn36
Member
Registered: 2014-01-14
Posts: 111

Re: Pulse audio and snd_hda_intel

Use the patched one (I assume you're talking about editing /etc/pulse/daemon.conf).

Last edited by korn36 (2014-01-16 14:15:14)

Offline

#18 2014-01-16 14:29:02

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

Works for a couple of applications simultaneously, but starting pavucontrol keeps it crashing (pavucontrol core dumps and PA crashes).
Additionally, I cannot listen to VLC and Skype at the same time at the moment for whatever reason, even though PA is running.

: [alsa-sink-ALC889 Analog] source.c: Processing rewind...
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0.500 0.500
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] resampler.c: Using resampler 'peaks'
I: [pulseaudio] resampler.c: Using s16le as working format.
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] source-output.c: Created output 3 "Peak detect" on alsa_output.pci-0000_00_1b.0.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "29"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "2.0"
I: [pulseaudio] source-output.c:     application.process.id = "4464"
I: [pulseaudio] source-output.c:     application.process.user = "thens"
I: [pulseaudio] source-output.c:     application.process.host = "alpha"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_GB.utf8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "08b82db301324170ac395769091f3985"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-ALC889 Analog] alsa-sink.c: hwbuf_unused=349272
D: [alsa-sink-ALC889 Analog] alsa-sink.c: setting avail_min=87760
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-ALC889 Analog] alsa-sink.c: hwbuf_unused=349272
D: [alsa-sink-ALC889 Analog] alsa-sink.c: setting avail_min=87760
Killed

Offline

#19 2014-01-16 14:34:20

korn36
Member
Registered: 2014-01-14
Posts: 111

Re: Pulse audio and snd_hda_intel

Skype mutes other stuff, it's also like this for me. Unmuting other apps in KMix when I'm in a Skype call fixes it.
IDK what to do with the pavucontrol crash.
If you install audacity and run it while VLC is playing, does PA crash?
EDIT: For the skype-mutes-everything, try the solution from the bottom of this wiki page: https://wiki.archlinux.org/index.php/Sk … nd_sources

Last edited by korn36 (2014-01-16 14:40:07)

Offline

#20 2014-01-16 14:41:31

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

Yeh, Skype tends to mute things, but it's deactivated on this machine and it has worked before (on this system).
Dunno about audacity, but I can run VLC and, let's say, flash/youtube video; PA does not crash.

Offline

#21 2014-01-16 14:48:55

korn36
Member
Registered: 2014-01-14
Posts: 111

Re: Pulse audio and snd_hda_intel

Did you edit both source.c and sink.c when making a patched package?
What is in the PA's log when you start pavucontrol?

Offline

#22 2014-01-16 14:52:51

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

Yep, edited both (currently at value 150*...).

I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 4.0-400-gc1c1-dirty
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014
D: [pulseaudio] main.c: Found 8 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is 08b82db301324170ac395769091f3985.
I: [pulseaudio] main.c: Session ID is 2.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/thens/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-4.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
W: [pulseaudio] pid.c: Stale PID file, overwriting.
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/thens/.config/pulse/08b82db301324170ac395769091f3985-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/thens/.config/pulse/08b82db301324170ac395769091f3985-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/thens/.config/pulse/08b82db301324170ac395769091f3985-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/thens/.config/pulse/08b82db301324170ac395769091f3985-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/thens/.config/pulse/08b82db301324170ac395769091f3985-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/thens/.config/pulse/08b82db301324170ac395769091f3985-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="1" name="pci-0000_02_00.1" card_name="alsa_card.pci-0000_02_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 5773c2a27bc4e3958f4a718052d7f0b5 as :1.97
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-stereo - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-mono - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-stereo - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-mono - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-mono - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-mono - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-0'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=3 Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x1551b70, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hdmi:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hdmi:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hdmi:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hdmi:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:analog-mono - will not be able to open output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:analog-stereo - will not be able to open output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:iec958-stereo - will not be able to open output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo-extra1)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:analog-mono - will not be able to open output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:analog-stereo - will not be able to open output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround-extra1)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:analog-mono - will not be able to open output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:analog-stereo - will not be able to open output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:iec958-stereo - will not be able to open output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo-extra2)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,2 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,2: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:analog-mono - will not be able to open output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:analog-stereo - will not be able to open output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround-extra2)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,2 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,2: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:analog-mono - will not be able to open output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:analog-stereo - will not be able to open output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:iec958-stereo - will not be able to open output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo-extra3)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,3 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,3: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:analog-mono - will not be able to open output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:analog-stereo - will not be able to open output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround-extra3)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,3 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,3: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:analog-mono - will not be able to open output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:analog-stereo - will not be able to open output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:iec958-stereo - will not be able to open output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Profile set 0x14f4e70, auto_profiles=yes, probed=yes, n_mappings=1, n_profiles=1, n_decibel_fixes=0
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo (Digital Stereo (HDMI)), priority=54, channel_map=front-left,front-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo (Digital Stereo (HDMI) Output), priority=5400, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_02_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_02_00.1"
D: [pulseaudio] module-alsa-card.c: Found 1 jacks.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now plugged in
D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status yes
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio1'
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Added 1 ports
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_02_00.1.hdmi-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_02_00.1.hdmi-stereo: front-left: 65536 / 100%,   front-right: 65536 / 100%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_02_00.1.hdmi-stereo.
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_02_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "16"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = "HDMI 0"
I: [pulseaudio] sink.c:     alsa.id = "HDMI 0"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "3"
I: [pulseaudio] sink.c:     alsa.card = "1"
I: [pulseaudio] sink.c:     alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] sink.c:     alsa.long_card_name = "HD-Audio Generic at 0xfbbbc000 irq 47"
I: [pulseaudio] sink.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c:     device.bus_path = "pci-0000:02:00.1"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1"
I: [pulseaudio] sink.c:     device.bus = "pci"
I: [pulseaudio] sink.c:     device.vendor.id = "1002"
I: [pulseaudio] sink.c:     device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] sink.c:     device.product.id = "aa50"
I: [pulseaudio] sink.c:     device.product.name = "Cypress HDMI Audio [Radeon HD 5800 Series]"
I: [pulseaudio] sink.c:     device.string = "hdmi:1"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c:     device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c:     device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c:     device.description = "Cypress HDMI Audio [Radeon HD 5800 Series] Digital Stereo (HDMI)"
I: [pulseaudio] sink.c:     alsa.mixer_name = "ATI R6xx HDMI"
I: [pulseaudio] sink.c:     alsa.components = "HDA:1002aa01,00aa0100,00100200"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card-pci"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_02_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of Cypress HDMI Audio [Radeon HD 5800 Series] Digital Stereo (HDMI)"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "1"
I: [pulseaudio] source.c:     alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] source.c:     alsa.long_card_name = "HD-Audio Generic at 0xfbbbc000 irq 47"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:02:00.1"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "1002"
I: [pulseaudio] source.c:     device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] source.c:     device.product.id = "aa50"
I: [pulseaudio] source.c:     device.product.name = "Cypress HDMI Audio [Radeon HD 5800 Series]"
I: [pulseaudio] source.c:     device.string = "1"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
D: [pulseaudio] alsa-sink.c: setting avail_min=87310
D: [pulseaudio] alsa-mixer.c: Activating path hdmi-output-0
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hooks PCM
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c:   stream       : PLAYBACK
D: [pulseaudio] alsa-util.c:   access       : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c:   format       : S16_LE
D: [pulseaudio] alsa-util.c:   subformat    : STD
D: [pulseaudio] alsa-util.c:   channels     : 2
D: [pulseaudio] alsa-util.c:   rate         : 44100
D: [pulseaudio] alsa-util.c:   exact rate   : 44100 (44100/1)
D: [pulseaudio] alsa-util.c:   msbits       : 16
D: [pulseaudio] alsa-util.c:   buffer_size  : 88192
D: [pulseaudio] alsa-util.c:   period_size  : 44096
D: [pulseaudio] alsa-util.c:   period_time  : 999909
D: [pulseaudio] alsa-util.c:   tstamp_mode  : ENABLE
D: [pulseaudio] alsa-util.c:   period_step  : 1
D: [pulseaudio] alsa-util.c:   avail_min    : 87310
D: [pulseaudio] alsa-util.c:   period_event : 0
D: [pulseaudio] alsa-util.c:   start_threshold  : -1
D: [pulseaudio] alsa-util.c:   stop_threshold   : 6205960286516543488
D: [pulseaudio] alsa-util.c:   silence_threshold: 0
D: [pulseaudio] alsa-util.c:   silence_size : 0
D: [pulseaudio] alsa-util.c:   boundary     : 6205960286516543488
D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 1 'HD-Audio Generic' device 3 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c:   stream       : PLAYBACK
D: [pulseaudio] alsa-util.c:   access       : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c:   format       : S16_LE
D: [pulseaudio] alsa-util.c:   subformat    : STD
D: [pulseaudio] alsa-util.c:   channels     : 2
D: [pulseaudio] alsa-util.c:   rate         : 44100
D: [pulseaudio] alsa-util.c:   exact rate   : 44100 (44100/1)
D: [pulseaudio] alsa-util.c:   msbits       : 16
D: [pulseaudio] alsa-util.c:   buffer_size  : 88192
D: [pulseaudio] alsa-util.c:   period_size  : 44096
D: [pulseaudio] alsa-util.c:   period_time  : 999909
D: [pulseaudio] alsa-util.c:   tstamp_mode  : ENABLE
D: [pulseaudio] alsa-util.c:   period_step  : 1
D: [pulseaudio] alsa-util.c:   avail_min    : 87310
D: [pulseaudio] alsa-util.c:   period_event : 0
D: [pulseaudio] alsa-util.c:   start_threshold  : -1
D: [pulseaudio] alsa-util.c:   stop_threshold   : 6205960286516543488
D: [pulseaudio] alsa-util.c:   silence_threshold: 0
D: [pulseaudio] alsa-util.c:   silence_size : 0
D: [pulseaudio] alsa-util.c:   boundary     : 6205960286516543488
D: [pulseaudio] alsa-util.c:   appl_ptr     : 0
D: [pulseaudio] alsa-util.c:   hw_ptr       : 0
D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
I: [alsa-sink-HDMI 0] core-util.c: Clamping rlimit-rttime to 200000 for RealtimeKit
D: [alsa-sink-HDMI 0] core-util.c: RealtimeKit worked.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] alsa-util.c: ELD info empty (for device=3)
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_02_00.1" card_name="alsa_card.pci-0000_02_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1 (alsa_card.pci-0000_02_00.1) module loaded.
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA Intel/HDA Intel.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x15354b0, direction=2
D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Microphone), direction=2, priority=82, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Option Rear Mic (analog-input-microphone-rear/analog-input-microphone-rear) index=1, priority=0
D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Rear Mic Phantom, alsa_name='Rear Mic Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-rear (analog-input-microphone-rear) priority=0
D: [pulseaudio] alsa-mixer.c: Path analog-input-linein (Line In), direction=2, priority=81, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Option Line (analog-input-linein/analog-input-linein) index=2, priority=0
D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Line, alsa_name='Line Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Phantom, alsa_name='Line Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Setting analog-input-linein (analog-input-linein) priority=0
D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=3, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-lineout'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=3, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Front Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-speaker', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-desktop-speaker'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=3, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=3, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones-2'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=3, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' failed.
D: [pulseaudio] alsa-mixer.c: Removing path 'analog-output' as it is a subset of 'analog-output-lineout'.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x15a3d10, direction=1
D: [pulseaudio] alsa-mixer.c: Path analog-output-lineout (Line Out), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=64, min_dB=-177, max_dB=2
D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front, alsa_name='Line Out Front Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front Phantom, alsa_name='Line Out Front Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE, alsa_name='Line Out CLFE Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE Phantom, alsa_name='Line Out CLFE Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround, alsa_name='Line Out Surround Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround Phantom, alsa_name='Line Out Surround Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side, alsa_name='Line Out Side Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side Phantom, alsa_name='Line Out Side Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Path analog-output-headphones (Headphones), direction=1, priority=90, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=64, min_dB=-177, max_dB=2
D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Front, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Surround, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Side, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Center, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=no
D: [pulseaudio] alsa-mixer.c: Element LFE, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=no
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Front Headphone, alsa_name='Front Headphone Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Front Headphone Phantom, alsa_name='Front Headphone Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Headphone, alsa_name='Headphone Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Headphone Phantom, alsa_name='Headphone Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Headphone Mic, alsa_name='Headphone Mic Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo supported.
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open surround40:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-40 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround40:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround40:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Removing path 'analog-output' as it is a subset of 'analog-output-lineout'.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x15337d0, direction=1
D: [pulseaudio] alsa-mixer.c: Path analog-output-lineout (Line Out), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=64, min_dB=-177, max_dB=2
D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front, alsa_name='Line Out Front Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front Phantom, alsa_name='Line Out Front Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE, alsa_name='Line Out CLFE Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE Phantom, alsa_name='Line Out CLFE Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround, alsa_name='Line Out Surround Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround Phantom, alsa_name='Line Out Surround Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side, alsa_name='Line Out Side Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side Phantom, alsa_name='Line Out Side Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-40+input:analog-stereo supported.
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open surround41:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 7925 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-41 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround41:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround41:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Removing path 'analog-output' as it is a subset of 'analog-output-lineout'.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x15f7a90, direction=1
D: [pulseaudio] alsa-mixer.c: Path analog-output-lineout (Line Out), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=64, min_dB=-177, max_dB=2
D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front, alsa_name='Line Out Front Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front Phantom, alsa_name='Line Out Front Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE, alsa_name='Line Out CLFE Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE Phantom, alsa_name='Line Out CLFE Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround, alsa_name='Line Out Surround Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround Phantom, alsa_name='Line Out Surround Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side, alsa_name='Line Out Side Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side Phantom, alsa_name='Line Out Side Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-41+input:analog-stereo supported.
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open surround50:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 7925 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-50 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround50:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround50:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Removing path 'analog-output' as it is a subset of 'analog-output-lineout'.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x15a7e00, direction=1
D: [pulseaudio] alsa-mixer.c: Path analog-output-lineout (Line Out), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=64, min_dB=-177, max_dB=2
D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front, alsa_name='Line Out Front Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front Phantom, alsa_name='Line Out Front Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE, alsa_name='Line Out CLFE Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE Phantom, alsa_name='Line Out CLFE Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround, alsa_name='Line Out Surround Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround Phantom, alsa_name='Line Out Surround Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side, alsa_name='Line Out Side Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side Phantom, alsa_name='Line Out Side Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-50+input:analog-stereo supported.
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open surround51:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 7925 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-51 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround51:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround51:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Removing path 'analog-output' as it is a subset of 'analog-output-lineout'.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x15a45f0, direction=1
D: [pulseaudio] alsa-mixer.c: Path analog-output-lineout (Line Out), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=64, min_dB=-177, max_dB=2
D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front, alsa_name='Line Out Front Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front Phantom, alsa_name='Line Out Front Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE, alsa_name='Line Out CLFE Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE Phantom, alsa_name='Line Out CLFE Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround, alsa_name='Line Out Surround Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround Phantom, alsa_name='Line Out Surround Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side, alsa_name='Line Out Side Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side Phantom, alsa_name='Line Out Side Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-51+input:analog-stereo supported.
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open surround71:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 5944 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-71 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround71:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround71:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Removing path 'analog-output' as it is a subset of 'analog-output-lineout'.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x153e4d0, direction=1
D: [pulseaudio] alsa-mixer.c: Path analog-output-lineout (Line Out), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=64, min_dB=-177, max_dB=2
D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front, alsa_name='Line Out Front Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front Phantom, alsa_name='Line Out Front Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE, alsa_name='Line Out CLFE Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE Phantom, alsa_name='Line Out CLFE Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround, alsa_name='Line Out Surround Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround Phantom, alsa_name='Line Out Surround Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side, alsa_name='Line Out Side Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side Phantom, alsa_name='Line Out Side Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-71+input:analog-stereo supported.
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open iec958:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:iec958-stereo supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'iec958-stereo-output'
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x15c06d0, direction=1
D: [pulseaudio] alsa-mixer.c: Path iec958-stereo-output (Digital Output (S/PDIF)), direction=1, priority=0, probed=yes, supported=yes, has_mute=yes, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=1, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 70560 samples), period size second (to 17640 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:iec958-stereo+input:analog-stereo supported.
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-mono - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-mono - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-mono - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-mono - will not be able to open output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-stereo - will not be able to open output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround)
D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:analog-mono - will not be able to open output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:analog-stereo - will not be able to open output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:iec958-stereo - will not be able to open output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo-extra1)
D: [pulseaudio] alsa-util.c: Trying hdmi:0,1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:analog-mono - will not be able to open output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:analog-stereo - will not be able to open output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround-extra1)
D: [pulseaudio] alsa-util.c: Trying hdmi:0,1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:analog-mono - will not be able to open output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:analog-stereo - will not be able to open output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:iec958-stereo - will not be able to open output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo-extra2)
D: [pulseaudio] alsa-util.c: Trying hdmi:0,2 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:analog-mono - will not be able to open output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:analog-stereo - will not be able to open output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround-extra2)
D: [pulseaudio] alsa-util.c: Trying hdmi:0,2 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:analog-mono - will not be able to open output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:analog-stereo - will not be able to open output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:iec958-stereo - will not be able to open output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo-extra3)
D: [pulseaudio] alsa-util.c: Trying hdmi:0,3 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:analog-mono - will not be able to open output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:analog-stereo - will not be able to open output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround-extra3)
D: [pulseaudio] alsa-util.c: Trying hdmi:0,3 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:analog-mono - will not be able to open output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:analog-stereo - will not be able to open output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:iec958-stereo - will not be able to open output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Profile set 0x1519460, auto_profiles=yes, probed=yes, n_mappings=7, n_profiles=15, n_decibel_fixes=0
D: [pulseaudio] alsa-mixer.c: Mapping analog-stereo (Analog Stereo), priority=60, channel_map=front-left,front-right, supported=yes, direction=0
D: [pulseaudio] alsa-mixer.c: Mapping analog-surround-40 (Analog Surround 4.0), priority=7, channel_map=front-left,front-right,rear-left,rear-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping analog-surround-41 (Analog Surround 4.1), priority=8, channel_map=front-left,front-right,rear-left,rear-right,lfe, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping analog-surround-50 (Analog Surround 5.0), priority=7, channel_map=front-left,front-right,rear-left,rear-right,front-center, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping analog-surround-51 (Analog Surround 5.1), priority=8, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping analog-surround-71 (Analog Surround 7.1), priority=7, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping iec958-stereo (Digital Stereo (IEC958)), priority=55, channel_map=front-left,front-right, supported=yes, direction=0
D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo (Analog Stereo Input), priority=60, supported=yes n_input_mappings=1, n_output_mappings=0
D: [pulseaudio] alsa-mixer.c: Input analog-stereo
D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo (Analog Stereo Output), priority=6000, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output analog-stereo
D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo (Analog Stereo Duplex), priority=6060, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input analog-stereo
D: [pulseaudio] alsa-mixer.c: Output analog-stereo
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-40 (Analog Surround 4.0 Output), priority=700, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output analog-surround-40
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-40+input:analog-stereo (Analog Surround 4.0 Output + Analog Stereo Input), priority=760, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input analog-stereo
D: [pulseaudio] alsa-mixer.c: Output analog-surround-40
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-41 (Analog Surround 4.1 Output), priority=800, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output analog-surround-41
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-41+input:analog-stereo (Analog Surround 4.1 Output + Analog Stereo Input), priority=860, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input analog-stereo
D: [pulseaudio] alsa-mixer.c: Output analog-surround-41
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-50 (Analog Surround 5.0 Output), priority=700, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output analog-surround-50
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-50+input:analog-stereo (Analog Surround 5.0 Output + Analog Stereo Input), priority=760, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input analog-stereo
D: [pulseaudio] alsa-mixer.c: Output analog-surround-50
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-51 (Analog Surround 5.1 Output), priority=800, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output analog-surround-51
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-51+input:analog-stereo (Analog Surround 5.1 Output + Analog Stereo Input), priority=860, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input analog-stereo
D: [pulseaudio] alsa-mixer.c: Output analog-surround-51
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-71 (Analog Surround 7.1 Output), priority=700, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output analog-surround-71
D: [pulseaudio] alsa-mixer.c: Profile output:analog-surround-71+input:analog-stereo (Analog Surround 7.1 Output + Analog Stereo Input), priority=760, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input analog-stereo
D: [pulseaudio] alsa-mixer.c: Output analog-surround-71
D: [pulseaudio] alsa-mixer.c: Profile output:iec958-stereo (Digital Stereo (IEC958) Output), priority=5500, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output iec958-stereo
D: [pulseaudio] alsa-mixer.c: Profile output:iec958-stereo+input:analog-stereo (Digital Stereo (IEC958) Output + Analog Stereo Input), priority=5560, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input analog-stereo
D: [pulseaudio] alsa-mixer.c: Output iec958-stereo
I: [pulseaudio] module-card-restore.c: Restored profile 'output:analog-stereo+input:analog-stereo' for card alsa_card.pci-0000_00_1b.0.
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1b.0.
I: [pulseaudio] card.c: Created 1 "alsa_card.pci-0000_00_1b.0"
D: [pulseaudio] module-alsa-card.c: Found 8 jacks.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] module-alsa-card.c: Jack 'Line Out Front Jack' is now plugged in
D: [pulseaudio] device-port.c: Setting port analog-output-lineout to status yes
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-lineout
D: [pulseaudio] module-alsa-card.c: Jack 'Line Out CLFE Jack' is now unplugged
D: [pulseaudio] module-alsa-card.c: Jack 'Line Out Surround Jack' is now unplugged
D: [pulseaudio] module-alsa-card.c: Jack 'Line Out Side Jack' is now unplugged
D: [pulseaudio] module-alsa-card.c: Jack 'Front Headphone Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port analog-output-headphones to status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-headphones
D: [pulseaudio] module-alsa-card.c: Jack 'Front Mic Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port analog-input-front-mic to status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-input-front-mic
D: [pulseaudio] module-alsa-card.c: Jack 'Rear Mic Jack' is now plugged in
D: [pulseaudio] device-port.c: Setting port analog-input-rear-mic to status yes
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-input-rear-mic
D: [pulseaudio] module-alsa-card.c: Jack 'Line Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port analog-input-linein to status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-input-linein
D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0'
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Added 2 ports
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_1b.0.analog-stereo: front-left: 82524 / 126%,   front-right: 82524 / 126%
I: [pulseaudio] sink.c: Created sink 1 "alsa_output.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "16"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = "ALC889 Analog"
I: [pulseaudio] sink.c:     alsa.id = "ALC889 Analog"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "0"
I: [pulseaudio] sink.c:     alsa.card = "0"
I: [pulseaudio] sink.c:     alsa.card_name = "HDA Intel"
I: [pulseaudio] sink.c:     alsa.long_card_name = "HDA Intel at 0xfbaf8000 irq 45"
I: [pulseaudio] sink.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c:     device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] sink.c:     device.bus = "pci"
I: [pulseaudio] sink.c:     device.vendor.id = "8086"
I: [pulseaudio] sink.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] sink.c:     device.product.id = "3a3e"
I: [pulseaudio] sink.c:     device.product.name = "82801JI (ICH10 Family) HD Audio Controller"
I: [pulseaudio] sink.c:     device.form_factor = "internal"
I: [pulseaudio] sink.c:     device.string = "front:0"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "176400"
I: [pulseaudio] sink.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c:     device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] sink.c:     alsa.mixer_name = "Realtek ALC889"
I: [pulseaudio] sink.c:     alsa.components = "HDA:10ec0889,14627593,00100004"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card-pci"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] source.c: Created source 1 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of Built-in Audio Analog Stereo"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "HDA Intel"
I: [pulseaudio] source.c:     alsa.long_card_name = "HDA Intel at 0xfbaf8000 irq 45"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "8086"
I: [pulseaudio] source.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c:     device.product.id = "3a3e"
I: [pulseaudio] source.c:     device.product.name = "82801JI (ICH10 Family) HD Audio Controller"
I: [pulseaudio] source.c:     device.form_factor = "internal"
I: [pulseaudio] source.c:     device.string = "0"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
D: [pulseaudio] alsa-sink.c: setting avail_min=87319
D: [pulseaudio] alsa-mixer.c: Activating path analog-output-lineout
D: [pulseaudio] alsa-mixer.c: Path analog-output-lineout (Line Out), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=64, min_dB=-177, max_dB=2
D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front, alsa_name='Line Out Front Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Front Phantom, alsa_name='Line Out Front Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE, alsa_name='Line Out CLFE Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out CLFE Phantom, alsa_name='Line Out CLFE Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround, alsa_name='Line Out Surround Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Surround Phantom, alsa_name='Line Out Surround Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side, alsa_name='Line Out Side Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Out Side Phantom, alsa_name='Line Out Side Phantom Jack', detection unavailable
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -177.00 dB to 2.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to -2.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Soft volume PCM
D: [pulseaudio] alsa-util.c: Control: PCM Playback Volume
D: [pulseaudio] alsa-util.c: min_dB: -51
D: [pulseaudio] alsa-util.c: max_dB: 0
D: [pulseaudio] alsa-util.c: resolution: 256
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c:   stream       : PLAYBACK
D: [pulseaudio] alsa-util.c:   access       : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c:   format       : S16_LE
D: [pulseaudio] alsa-util.c:   subformat    : STD
D: [pulseaudio] alsa-util.c:   channels     : 2
D: [pulseaudio] alsa-util.c:   rate         : 44100
D: [pulseaudio] alsa-util.c:   exact rate   : 44100 (44100/1)
D: [pulseaudio] alsa-util.c:   msbits       : 16
D: [pulseaudio] alsa-util.c:   buffer_size  : 88200
D: [pulseaudio] alsa-util.c:   period_size  : 44100
D: [pulseaudio] alsa-util.c:   period_time  : 1000000
D: [pulseaudio] alsa-util.c:   tstamp_mode  : ENABLE
D: [pulseaudio] alsa-util.c:   period_step  : 1
D: [pulseaudio] alsa-util.c:   avail_min    : 87319
D: [pulseaudio] alsa-util.c:   period_event : 0
D: [pulseaudio] alsa-util.c:   start_threshold  : -1
D: [pulseaudio] alsa-util.c:   stop_threshold   : 6206523236469964800
D: [pulseaudio] alsa-util.c:   silence_threshold: 0
D: [pulseaudio] alsa-util.c:   silence_size : 0
D: [pulseaudio] alsa-util.c:   boundary     : 6206523236469964800
D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c:   stream       : PLAYBACK
D: [pulseaudio] alsa-util.c:   access       : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c:   format       : S16_LE
D: [pulseaudio] alsa-util.c:   subformat    : STD
D: [pulseaudio] alsa-util.c:   channels     : 2
D: [pulseaudio] alsa-util.c:   rate         : 44100
D: [pulseaudio] alsa-util.c:   exact rate   : 44100 (44100/1)
D: [pulseaudio] alsa-util.c:   msbits       : 16
D: [pulseaudio] alsa-util.c:   buffer_size  : 88200
D: [pulseaudio] alsa-util.c:   period_size  : 44100
D: [pulseaudio] alsa-util.c:   period_time  : 1000000
D: [pulseaudio] alsa-util.c:   tstamp_mode  : ENABLE
D: [pulseaudio] alsa-util.c:   period_step  : 1
D: [pulseaudio] alsa-util.c:   avail_min    : 87319
D: [pulseaudio] alsa-util.c:   period_event : 0
D: [pulseaudio] alsa-util.c:   start_threshold  : -1
D: [pulseaudio] alsa-util.c:   stop_threshold   : 6206523236469964800
D: [pulseaudio] alsa-util.c:   silence_threshold: 0
D: [pulseaudio] alsa-util.c:   silence_size : 0
D: [pulseaudio] alsa-util.c:   boundary     : 6206523236469964800
D: [pulseaudio] alsa-util.c:   appl_ptr     : 0
D: [pulseaudio] alsa-util.c:   hw_ptr       : 0
D: [pulseaudio] alsa-sink.c: Requested volume: front-left: 82524 / 126% / 6.01 dB,   front-right: 82524 / 126% / 6.01 dB
D: [pulseaudio] alsa-sink.c: Got hardware volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Thread starting up
D: [pulseaudio] alsa-sink.c: Calculated software volume: front-left: 82524 / 126% / 6.01 dB,   front-right: 82524 / 126% / 6.01 dB (accurate-enough=no)
D: [pulseaudio] alsa-sink.c: Written HW volume did not match with the request: front-left: 82524 / 126% / 6.01 dB,   front-right: 82524 / 126% / 6.01 dB (request) != front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
D: [alsa-sink-ALC889 Analog] core-util.c: RealtimeKit worked.
I: [alsa-sink-ALC889 Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-ALC889 Analog] alsa-sink.c: Starting playback.
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] module-device-restore.c: Could not set format on sink alsa_output.pci-0000_00_1b.0.analog-stereo
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Added 3 ports
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.pci-0000_00_1b.0.analog-stereo: front-left: 19194 /  29%,   front-right: 19194 /  29%
I: [pulseaudio] source.c: Created source 2 "alsa_input.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     alsa.resolution_bits = "16"
I: [pulseaudio] source.c:     device.api = "alsa"
I: [pulseaudio] source.c:     device.class = "sound"
I: [pulseaudio] source.c:     alsa.class = "generic"
I: [pulseaudio] source.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] source.c:     alsa.name = "ALC889 Analog"
I: [pulseaudio] source.c:     alsa.id = "ALC889 Analog"
I: [pulseaudio] source.c:     alsa.subdevice = "0"
I: [pulseaudio] source.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c:     alsa.device = "0"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "HDA Intel"
I: [pulseaudio] source.c:     alsa.long_card_name = "HDA Intel at 0xfbaf8000 irq 45"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "8086"
I: [pulseaudio] source.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c:     device.product.id = "3a3e"
I: [pulseaudio] source.c:     device.product.name = "82801JI (ICH10 Family) HD Audio Controller"
I: [pulseaudio] source.c:     device.form_factor = "internal"
I: [pulseaudio] source.c:     device.string = "front:0"
I: [pulseaudio] source.c:     device.buffering.buffer_size = "352800"
I: [pulseaudio] source.c:     device.buffering.fragment_size = "176400"
I: [pulseaudio] source.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] source.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] source.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c:     device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] source.c:     alsa.mixer_name = "Realtek ALC889"
I: [pulseaudio] source.c:     alsa.components = "HDA:10ec0889,14627593,00100004"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
D: [pulseaudio] alsa-source.c: hwbuf_unused=0
D: [pulseaudio] alsa-source.c: setting avail_min=87319
D: [pulseaudio] alsa-mixer.c: Activating path analog-input-rear-mic
D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Microphone), direction=2, priority=82, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Option Rear Mic (analog-input-microphone-rear/analog-input-microphone-rear) index=1, priority=0
D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Rear Mic Phantom, alsa_name='Rear Mic Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-rear (analog-input-microphone-rear) priority=0
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -16.00 dB to 60.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -60.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c:   stream       : CAPTURE
D: [pulseaudio] alsa-util.c:   access       : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c:   format       : S16_LE
D: [pulseaudio] alsa-util.c:   subformat    : STD
D: [pulseaudio] alsa-util.c:   channels     : 2
D: [pulseaudio] alsa-util.c:   rate         : 44100
D: [pulseaudio] alsa-util.c:   exact rate   : 44100 (44100/1)
D: [pulseaudio] alsa-util.c:   msbits       : 16
D: [pulseaudio] alsa-util.c:   buffer_size  : 88200
D: [pulseaudio] alsa-util.c:   period_size  : 44100
D: [pulseaudio] alsa-util.c:   period_time  : 1000000
D: [pulseaudio] alsa-util.c:   tstamp_mode  : ENABLE
D: [pulseaudio] alsa-util.c:   period_step  : 1
D: [pulseaudio] alsa-util.c:   avail_min    : 87319
D: [pulseaudio] alsa-util.c:   period_event : 0
D: [pulseaudio] alsa-util.c:   start_threshold  : -1
D: [pulseaudio] alsa-util.c:   stop_threshold   : 6206523236469964800
D: [pulseaudio] alsa-util.c:   silence_threshold: 0
D: [pulseaudio] alsa-util.c:   silence_size : 0
D: [pulseaudio] alsa-util.c:   boundary     : 6206523236469964800
D: [pulseaudio] alsa-util.c:   appl_ptr     : 0
D: [pulseaudio] alsa-util.c:   hw_ptr       : 0
D: [pulseaudio] alsa-source.c: Requested volume: front-left: 19194 /  29% / -32.00 dB,   front-right: 19194 /  29% / -32.00 dB
D: [pulseaudio] alsa-source.c: Got hardware volume: front-left: 18472 /  28% / -33.00 dB,   front-right: 18472 /  28% / -33.00 dB
D: [pulseaudio] alsa-source.c: Calculated software volume: front-left: 68098 / 104% / 1.00 dB,   front-right: 68098 / 104% / 1.00 dB (accurate-enough=no)
D: [alsa-source-ALC889 Analog] alsa-source.c: Thread starting up
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-source-ALC889 Analog] core-util.c: RealtimeKit worked.
I: [alsa-source-ALC889 Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-ALC889 Analog] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1b.0/sound/card0 (alsa_card.pci-0000_00_1b.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 2 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-jackdbus-detect.so': success
D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #8; argument: "channels=2").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-bluetooth-policy.so': success
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #9; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-bluetooth-discover.so': success
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-bluez5-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 8471cbc287a34ea4dc42096c52d7f02a as :1.70
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #11; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-bluez4-discover.so': success
I: [pulseaudio] module.c: Loaded "module-bluez4-discover" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #10; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #14; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #15; argument: "").
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo'.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #19; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_02_00.1.hdmi-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #20; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-console-kit.so': success
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #21; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-4.0/modules/module-systemd-login.so': success
I: [pulseaudio] client.c: Created 0 "Login Session 2"
D: [pulseaudio] module-systemd-login.c: Added new session 2
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #23; argument: "").
D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #24; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #25; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #26; argument: "").
D: [pulseaudio] main.c: Got org.PulseAudio1!
D: [pulseaudio] main.c: Got org.pulseaudio.Server!
I: [pulseaudio] main.c: Daemon startup complete.
D: [pulseaudio] bluez4-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_02_00.1.
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0.
E: [pulseaudio] bluez4-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
I: [alsa-sink-HDMI 0] alsa-sink.c: Underrun!
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 30.00 ms
I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
D: [pulseaudio] protocol-native.c: SHM possible: yes
D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pavucontrol
D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/pavucontrol.desktop.
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_02_00.1.hdmi-stereo becomes busy, resuming.
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0.500 0.500
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] resampler.c: Using resampler 'peaks'
I: [pulseaudio] resampler.c: Using s16le as working format.
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] source-output.c: Created output 0 "Peak detect" on alsa_output.pci-0000_02_00.1.hdmi-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "29"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "2.0"
I: [pulseaudio] source-output.c:     application.process.id = "1802"
I: [pulseaudio] source-output.c:     application.process.user = "thens"
I: [pulseaudio] source-output.c:     application.process.host = "alpha"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_GB.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "08b82db301324170ac395769091f3985"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [alsa-sink-HDMI 0] alsa-sink.c: Underrun!
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 40.00 ms
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
D: [alsa-sink-HDMI 0] alsa-sink.c: Requesting rewind due to latency change.
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
D: [alsa-sink-HDMI 0] alsa-sink.c: Requested to rewind 352768 bytes.
D: [alsa-sink-HDMI 0] alsa-sink.c: Limited to 238332 bytes.
D: [alsa-sink-HDMI 0] alsa-sink.c: before: 59583
D: [alsa-sink-HDMI 0] alsa-sink.c: after: 58560
D: [alsa-sink-HDMI 0] alsa-sink.c: Rewound 234240 bytes.
D: [alsa-sink-HDMI 0] sink.c: Processing rewind...
D: [alsa-sink-HDMI 0] source.c: Processing rewind...
I: [alsa-sink-HDMI 0] alsa-sink.c: Underrun!
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 1.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
I: [alsa-sink-HDMI 0] alsa-sink.c: Underrun!
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 2.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
I: [pulseaudio] source-output.c: Trying to change sample rate
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
I: [alsa-sink-HDMI 0] alsa-sink.c: Underrun!
D: [pulseaudio] resampler.c: Channel matrix:
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 4.00 ms
D: [pulseaudio] resampler.c:        I00   I01 
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [pulseaudio] resampler.c:     +------------
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [pulseaudio] resampler.c: O00 | 0.500 0.500
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
I: [pulseaudio] remap.c: Using generic matrix remapping
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
I: [pulseaudio] resampler.c: Using resampler 'peaks'
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
I: [pulseaudio] resampler.c: Using s16le as working format.
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 8.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
I: [pulseaudio] source-output.c: Created output 1 "Peak detect" on alsa_output.pci-0000_00_1b.0.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "29"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "2.0"
I: [pulseaudio] source-output.c:     application.process.id = "1802"
I: [pulseaudio] source-output.c:     application.process.user = "thens"
I: [pulseaudio] source-output.c:     application.process.host = "alpha"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_GB.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "08b82db301324170ac395769091f3985"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 16.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 20.00ms
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=349240
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-ALC889 Analog] alsa-sink.c: hwbuf_unused=349272
D: [alsa-sink-ALC889 Analog] alsa-sink.c: setting avail_min=87760
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Requesting rewind due to latency change.
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-ALC889 Analog] alsa-sink.c: hwbuf_unused=349272
D: [alsa-sink-ALC889 Analog] alsa-sink.c: setting avail_min=87760
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Requested to rewind 352800 bytes.
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Limited to 339040 bytes.
D: [alsa-sink-ALC889 Analog] alsa-sink.c: before: 84760
D: [alsa-sink-ALC889 Analog] alsa-sink.c: after: 84760
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Rewound 339040 bytes.
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 26.00 ms
D: [alsa-sink-ALC889 Analog] sink.c: Processing rewind...
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 26.00ms
D: [alsa-sink-ALC889 Analog] sink.c: latency = 1399
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=348184
D: [alsa-sink-ALC889 Analog] source.c: Processing rewind...
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 26.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=348184
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87752
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 15.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 36.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 36.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=346420
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87488
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 36.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=346420
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87488
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 25.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 46.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 46.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=344656
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87047
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 46.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=344656
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=87047
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 35.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 56.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 56.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=342892
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=86606
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 56.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=342892
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=86606
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 45.99 ms
I: [pulseaudio] source-output.c: Trying to change sample rate
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0.500 0.500
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 66.00 ms
I: [pulseaudio] resampler.c: Using resampler 'peaks'
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 66.00ms
I: [pulseaudio] resampler.c: Using s16le as working format.
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=341128
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=86165
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 66.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=341128
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=86165
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] source-output.c: Created output 2 "Peak detect" on alsa_input.pci-0000_00_1b.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "29"
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 55.99 ms
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "2.0"
I: [pulseaudio] source-output.c:     application.process.id = "1802"
I: [pulseaudio] source-output.c:     application.process.user = "thens"
I: [pulseaudio] source-output.c:     application.process.host = "alpha"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_GB.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "08b82db301324170ac395769091f3985"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 76.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 76.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=339364
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=85724
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 76.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=339364
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=85724
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 65.99 ms
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: [alsa-source-ALC889 Analog] alsa-source.c: latency set to 20.00ms
D: [alsa-source-ALC889 Analog] alsa-source.c: hwbuf_unused=349272
D: [alsa-source-ALC889 Analog] alsa-source.c: setting avail_min=442
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 86.00 ms
D: [alsa-source-ALC889 Analog] alsa-source.c: latency set to 20.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 86.00ms
D: [alsa-source-ALC889 Analog] alsa-source.c: hwbuf_unused=349272
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=337600
D: [alsa-source-ALC889 Analog] alsa-source.c: setting avail_min=442
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=85283
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 86.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=337600
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=85283
D: [alsa-source-ALC889 Analog] alsa-source.c: Requested volume: front-left: 19194 /  29% / -32.00 dB,   front-right: 19194 /  29% / -32.00 dB
D: [alsa-source-ALC889 Analog] alsa-source.c: Got hardware volume: front-left: 18472 /  28% / -33.00 dB,   front-right: 18472 /  28% / -33.00 dB
D: [alsa-source-ALC889 Analog] alsa-source.c: Calculated software volume: front-left: 68098 / 104% / 1.00 dB,   front-right: 68098 / 104% / 1.00 dB (accurate-enough=no)
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 75.99 ms
D: [alsa-source-ALC889 Analog] source.c: Volume going down to 18472 at 339703977
D: [alsa-source-ALC889 Analog] source.c: Volume change to 18472 at 339703977 was written 7587 usec late
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 96.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 96.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=335836
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=84842
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 96.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=335836
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=84842
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 85.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 106.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 106.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=334072
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=84401
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 106.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=334072
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=84401
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 95.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 116.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 116.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=332308
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=83960
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 116.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=332308
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=83960
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 105.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 126.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 126.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=330544
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=83519
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 126.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=330544
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=83519
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 115.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 136.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 136.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=328780
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=83078
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 136.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=328780
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=83078
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 125.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 146.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 146.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=327016
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=82637
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 146.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=327016
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=82637
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 135.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 156.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 156.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=325252
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=82196
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 156.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=325252
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=82196
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 145.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 166.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 166.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=323488
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=81755
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 166.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=323488
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=81755
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 155.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 176.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 176.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=321724
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=81314
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 176.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=321724
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=81314
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 165.99 ms
I: [alsa-sink-HDMI 0] ratelimit.c: 126 events suppressed
I: [alsa-sink-HDMI 0] alsa-sink.c: Underrun!
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 186.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 186.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=319960
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=80873
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 186.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=319960
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=80873
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink-HDMI 0] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 175.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 196.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 196.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=318196
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=80432
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 196.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=318196
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=80432
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 185.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 206.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 206.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=316432
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=79991
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 206.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=316432
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=79991
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 195.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 216.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 216.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=314668
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=79550
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 216.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=314668
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=79550
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 205.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 226.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 226.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=312904
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=79109
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 226.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=312904
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=79109
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 215.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing minimal latency to 236.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 236.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=311140
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=78668
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 236.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=311140
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=78668
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=0
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=78667
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 225.99 ms
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_02_00.1.hdmi-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] source-output.c: Freeing output 0 "Peak detect"
D: [alsa-sink-ALC889 Analog] alsa-sink.c: hwbuf_unused=0
D: [alsa-sink-ALC889 Analog] alsa-sink.c: setting avail_min=87760
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] source-output.c: Freeing output 1 "Peak detect"
D: [alsa-source-ALC889 Analog] alsa-source.c: hwbuf_unused=0
D: [alsa-source-ALC889 Analog] alsa-source.c: setting avail_min=87760
D: [alsa-source-ALC889 Analog] alsa-source.c: Requested volume: front-left: 19194 /  29% / -32.00 dB,   front-right: 19194 /  29% / -32.00 dB
D: [alsa-source-ALC889 Analog] alsa-source.c: Got hardware volume: front-left: 18472 /  28% / -33.00 dB,   front-right: 18472 /  28% / -33.00 dB
D: [alsa-source-ALC889 Analog] alsa-source.c: Calculated software volume: front-left: 68098 / 104% / 1.00 dB,   front-right: 68098 / 104% / 1.00 dB (accurate-enough=no)
D: [alsa-source-ALC889 Analog] source.c: Volume not changing
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
I: [pulseaudio] source-output.c: Freeing output 2 "Peak detect"
I: [pulseaudio] client.c: Freed 1 "PulseAudio Volume Control"
I: [pulseaudio] protocol-native.c: Connection died.
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 235.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 245.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 255.99 ms
I: [alsa-sink-HDMI 0] alsa-sink.c: Increasing wakeup watermark to 265.99 ms
I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
D: [pulseaudio] protocol-native.c: SHM possible: yes
D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pavucontrol
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_02_00.1.hdmi-stereo becomes busy, resuming.
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0.500 0.500
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] resampler.c: Using resampler 'peaks'
I: [pulseaudio] resampler.c: Using s16le as working format.
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] source-output.c: Created output 3 "Peak detect" on alsa_output.pci-0000_02_00.1.hdmi-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "29"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "2.0"
I: [pulseaudio] source-output.c:     application.process.id = "1809"
I: [pulseaudio] source-output.c:     application.process.user = "thens"
I: [pulseaudio] source-output.c:     application.process.host = "alpha"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_GB.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "08b82db301324170ac395769091f3985"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 436.00 ms = 200.00 ms + 236.00 ms
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 236.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=311140
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=78227
D: [alsa-sink-HDMI 0] alsa-sink.c: Requesting rewind due to latency change.
D: [alsa-sink-HDMI 0] alsa-sink.c: Latency set to 236.00ms
D: [alsa-sink-HDMI 0] alsa-sink.c: hwbuf_unused=311140
D: [alsa-sink-HDMI 0] alsa-sink.c: setting avail_min=78227
D: [alsa-sink-HDMI 0] alsa-sink.c: Requested to rewind 352768 bytes.
D: [alsa-sink-HDMI 0] alsa-sink.c: Limited to 320920 bytes.
D: [alsa-sink-HDMI 0] alsa-sink.c: before: 80230
D: [alsa-sink-HDMI 0] alsa-sink.c: after: 79190
D: [alsa-sink-HDMI 0] alsa-sink.c: Rewound 316760 bytes.
D: [alsa-sink-HDMI 0] sink.c: Processing rewind...
D: [alsa-sink-HDMI 0] source.c: Processing rewind...
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0.500 0.500
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] resampler.c: Using resampler 'peaks'
I: [pulseaudio] resampler.c: Using s16le as working format.
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] source-output.c: Created output 4 "Peak detect" on alsa_output.pci-0000_00_1b.0.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "29"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "2.0"
I: [pulseaudio] source-output.c:     application.process.id = "1809"
I: [pulseaudio] source-output.c:     application.process.user = "thens"
I: [pulseaudio] source-output.c:     application.process.host = "alpha"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_GB.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "08b82db301324170ac395769091f3985"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-ALC889 Analog] alsa-sink.c: hwbuf_unused=349272
D: [alsa-sink-ALC889 Analog] alsa-sink.c: setting avail_min=87760
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Requesting rewind due to latency change.
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Latency set to 20.00ms
D: [alsa-sink-ALC889 Analog] alsa-sink.c: hwbuf_unused=349272
D: [alsa-sink-ALC889 Analog] alsa-sink.c: setting avail_min=87760
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Requested to rewind 352800 bytes.
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Limited to 181632 bytes.
D: [alsa-sink-ALC889 Analog] alsa-sink.c: before: 45408
D: [alsa-sink-ALC889 Analog] alsa-sink.c: after: 45408
D: [alsa-sink-ALC889 Analog] alsa-sink.c: Rewound 181632 bytes.
D: [alsa-sink-ALC889 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC889 Analog] sink.c: latency = 1454
D: [alsa-sink-ALC889 Analog] source.c: Processing rewind...
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes busy, resuming.
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0.500 0.500
I: [pulseaudio] remap.c: Using generic matrix remapping
I: [pulseaudio] resampler.c: Using resampler 'peaks'
I: [pulseaudio] resampler.c: Using s16le as working format.
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] source-output.c: Created output 5 "Peak detect" on alsa_input.pci-0000_00_1b.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "29"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "2.0"
I: [pulseaudio] source-output.c:     application.process.id = "1809"
I: [pulseaudio] source-output.c:     application.process.user = "thens"
I: [pulseaudio] source-output.c:     application.process.host = "alpha"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_GB.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "08b82db301324170ac395769091f3985"
I: [pulseaudio] source-output.c:     application.process.session_id = "2"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
D: [alsa-source-ALC889 Analog] alsa-source.c: latency set to 20.00ms
D: [alsa-source-ALC889 Analog] alsa-source.c: hwbuf_unused=349272
D: [alsa-source-ALC889 Analog] alsa-source.c: setting avail_min=442
D: [alsa-source-ALC889 Analog] alsa-source.c: latency set to 20.00ms
D: [alsa-source-ALC889 Analog] alsa-source.c: hwbuf_unused=349272
D: [alsa-source-ALC889 Analog] alsa-source.c: setting avail_min=442
D: [alsa-source-ALC889 Analog] alsa-source.c: Requested volume: front-left: 19194 /  29% / -32.00 dB,   front-right: 19194 /  29% / -32.00 dB
D: [alsa-source-ALC889 Analog] alsa-source.c: Got hardware volume: front-left: 18472 /  28% / -33.00 dB,   front-right: 18472 /  28% / -33.00 dB
D: [alsa-source-ALC889 Analog] alsa-source.c: Calculated software volume: front-left: 68098 / 104% / 1.00 dB,   front-right: 68098 / 104% / 1.00 dB (accurate-enough=no)
D: [alsa-source-ALC889 Analog] source.c: Volume not changing
I: [alsa-source-ALC889 Analog] alsa-source.c: Increasing minimal latency to 1.00 ms
D: [alsa-source-ALC889 Analog] alsa-source.c: latency set to 20.00ms
D: [alsa-source-ALC889 Analog] alsa-source.c: hwbuf_unused=349272
D: [alsa-source-ALC889 Analog] alsa-source.c: setting avail_min=442

Weird thing now is that PA crashes occasionally when starting VLC files. (similar output to the one posted above in this post).
I cannot really narrow it down, it's getting really annoying. Meh.

Offline

#23 2014-01-16 15:32:28

thens
Member
Registered: 2013-10-29
Posts: 14

Re: Pulse audio and snd_hda_intel

"Workaround" at the moment:
Reinstalled pulseaudio (and libpulse) from the official repository (with default configs) and not using 'pavucontrol' at all. Meh.
Instead I'm currently using gnome's sound application.
Well, seems to work for now, I guess it's only a matter of time, though.

Offline

#24 2014-01-16 20:03:46

korn36
Member
Registered: 2014-01-14
Posts: 111

Re: Pulse audio and snd_hda_intel

As it didn't happen for you on other distros, file a bug report on the Arch Linux Bugtracker: https://bugs.archlinux.org/

Offline

#25 2014-01-18 14:54:38

korn36
Member
Registered: 2014-01-14
Posts: 111

Re: Pulse audio and snd_hda_intel

Grr.
At first, PA seemed to work fine, but I just noticed some playback glitches such as dropping out audio or loud bursts of something that was played around 2 seconds before.
I'll have to use ALSA for now...

Last edited by korn36 (2014-01-18 15:17:06)

Offline

Board footer

Powered by FluxBB