You are not logged in.
Hello,
I fail to use `nvidia` as graphics driver for my xorg on a Thinkpad 530W laptop using Nvidia Quadro 2000M and intel graphics card. Using instead `intel` or `vesa` work. This following logs are with optimus enabled, but I tried the same things with only the nvidia graphics card enabled in the bios and I also fail to load the nvidia driver.
I followed the advice at
https://wiki.archlinux.org/index.php/NV … IA_Optimus
for xorg not to be confused by the presense of two graphics cards.
Do you have any ideas how I get the nvidia card to run? Should I try Bumblebee? But can this even help if already only the nvidia card by itself makes problem? Do you need any more information?
Thanks, for any advice,
Holger
This is a fresh install on a new laptop and I am new to Arch (but with Linux for a long time).
Here are the logs:
XOrg.log
[ 6.236]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 6.236] X Protocol Version 11, Revision 0
[ 6.236] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 6.236] Current Operating System: Linux ho-think 3.12.2-1-ARCH #1 SMP PREEMPT Fri Nov 29 21:14:15 CET 2013 x86_64
[ 6.236] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=267f069c-11da-4d2a-88fa-00cab4e28149 rw quiet resume=/dev/sda6
[ 6.236] Build Date: 01 November 2013 05:10:48PM
[ 6.236]
[ 6.236] Current version of pixman: 0.32.4
[ 6.236] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.236] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.237] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 5 23:50:52 2013
[ 6.239] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.239] (==) No Layout section. Using the first Screen section.
[ 6.239] (==) No screen section available. Using defaults.
[ 6.239] (**) |-->Screen "Default Screen Section" (0)
[ 6.239] (**) | |-->Monitor "<default monitor>"
[ 6.240] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 6.240] (**) | |-->Device "Nvidia Card"
[ 6.240] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 6.240] (==) Automatically adding devices
[ 6.240] (==) Automatically enabling devices
[ 6.240] (==) Automatically adding GPU devices
[ 6.242] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 6.242] Entry deleted from font path.
[ 6.244] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 6.244] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.244] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.244] (II) Loader magic: 0x7fdc20
[ 6.244] (II) Module ABI versions:
[ 6.244] X.Org ANSI C Emulation: 0.4
[ 6.244] X.Org Video Driver: 14.1
[ 6.244] X.Org XInput driver : 19.1
[ 6.244] X.Org Server Extension : 7.0
[ 6.244] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.245] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.246] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 6.246] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 6.246] Initializing built-in extension Generic Event Extension
[ 6.246] Initializing built-in extension SHAPE
[ 6.246] Initializing built-in extension MIT-SHM
[ 6.246] Initializing built-in extension XInputExtension
[ 6.246] Initializing built-in extension XTEST
[ 6.246] Initializing built-in extension BIG-REQUESTS
[ 6.246] Initializing built-in extension SYNC
[ 6.246] Initializing built-in extension XKEYBOARD
[ 6.246] Initializing built-in extension XC-MISC
[ 6.246] Initializing built-in extension SECURITY
[ 6.247] Initializing built-in extension XINERAMA
[ 6.247] Initializing built-in extension XFIXES
[ 6.247] Initializing built-in extension RENDER
[ 6.247] Initializing built-in extension RANDR
[ 6.247] Initializing built-in extension COMPOSITE
[ 6.247] Initializing built-in extension DAMAGE
[ 6.247] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.247] Initializing built-in extension DOUBLE-BUFFER
[ 6.247] Initializing built-in extension RECORD
[ 6.247] Initializing built-in extension DPMS
[ 6.247] Initializing built-in extension X-Resource
[ 6.247] Initializing built-in extension XVideo
[ 6.247] Initializing built-in extension XVideo-MotionCompensation
[ 6.247] Initializing built-in extension XFree86-VidModeExtension
[ 6.247] Initializing built-in extension XFree86-DGA
[ 6.247] Initializing built-in extension XFree86-DRI
[ 6.247] Initializing built-in extension DRI2
[ 6.247] (II) "glx" will be loaded by default.
[ 6.247] (II) LoadModule: "dri2"
[ 6.247] (II) Module "dri2" already built-in
[ 6.247] (II) LoadModule: "glamoregl"
[ 6.275] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 6.475] (II) Module glamoregl: vendor="X.Org Foundation"
[ 6.475] compiled for 1.14.2, module version = 0.5.1
[ 6.475] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.475] (II) LoadModule: "glx"
[ 6.475] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.517] (II) Module glx: vendor="NVIDIA Corporation"
[ 6.517] compiled for 4.0.2, module version = 1.0.0
[ 6.517] Module class: X.Org Server Extension
[ 6.517] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 6.517] Loading extension GLX
[ 6.517] (II) LoadModule: "nvidia"
[ 6.517] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 6.549] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6.549] compiled for 4.0.2, module version = 1.0.0
[ 6.549] Module class: X.Org Video Driver
[ 6.549] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 6.549] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6.549] (++) using VT number 7
[ 6.553] (II) Loading sub module "fb"
[ 6.554] (II) LoadModule: "fb"
[ 6.554] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.557] (II) Module fb: vendor="X.Org Foundation"
[ 6.557] compiled for 1.14.4, module version = 1.0.0
[ 6.557] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.557] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 6.557] (II) Loading sub module "wfb"
[ 6.557] (II) LoadModule: "wfb"
[ 6.557] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6.559] (II) Module wfb: vendor="X.Org Foundation"
[ 6.559] compiled for 1.14.4, module version = 1.0.0
[ 6.559] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.559] (II) Loading sub module "ramdac"
[ 6.559] (II) LoadModule: "ramdac"
[ 6.559] (II) Module "ramdac" already built-in
[ 6.559] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 6.559] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 6.559] (==) NVIDIA(0): RGB weight 888
[ 6.559] (==) NVIDIA(0): Default visual is TrueColor
[ 6.559] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.559] (**) NVIDIA(0): Enabling 2D acceleration
[ 11.161] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 11.161] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
[ 11.161] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
[ 11.161] (EE) NVIDIA(GPU-0): README for additional information.
[ 11.161] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[ 11.161] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 11.161] (II) UnloadModule: "nvidia"
[ 11.161] (II) UnloadSubModule: "wfb"
[ 11.161] (II) UnloadSubModule: "fb"
[ 11.161] (EE) Screen(s) found, but none have a usable configuration.
[ 11.161] (EE)
Fatal server error:
[ 11.161] (EE) no screens found(EE)
[ 11.161] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 11.161] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 11.162] (EE)
[ 11.167] (EE) Server terminated with error (1). Closing log file.dmesg with the nvidia failure at the end:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Nov 29 21:14:15 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=267f069c-11da-4d2a-88fa-00cab4e28149 rw quiet resume=/dev/sda6
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a6b2ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6b30000-0x00000000bae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000043e600000-0x000000043e7fffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2447DW0/2447DW0, BIOS G5ET93WW (2.53 ) 05/24/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask E00000000 write-back
[ 0.000000] 7 base 400000000 mask FC0000000 write-back
[ 0.000000] 8 base 43F000000 mask FFF000000 uncachable
[ 0.000000] 9 base 43E800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xa6b30 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43e400000-0x43e5fffff]
[ 0.000000] [mem 0x43e400000-0x43e5fffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43e3fffff]
[ 0.000000] [mem 0x43c000000-0x43e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
[ 0.000000] [mem 0x400000000-0x43bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xa6b2ffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xa69fffff] page 2M
[ 0.000000] [mem 0xa6a00000-0xa6b2ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x379be000-0x37cd6fff]
[ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000baffe170 000BC (v01 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: FACP 00000000bafe6000 0010C (v05 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000bafe8000 10A68 (v01 LENOVO TP-G5 00002530 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000baf54000 00040
[ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO TP-G5 00002530 PTL 00000001)
[ 0.000000] ACPI: TCPA 00000000baffc000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 00000000baffb000 00408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000baffa000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000baff9000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 00000000bafe4000 00038 (v01 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000bafe3000 00098 (v01 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000bafe2000 0003C (v01 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: ECDT 00000000bafe1000 00052 (v01 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: FPDT 00000000bafe0000 00064 (v01 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: ASF! 00000000bafe7000 000A5 (v32 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000bafdf000 0003E (v01 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000bafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: MSDM 00000000bafdd000 00055 (v03 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000bafdc000 00D23 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafdb000 00A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bafda000 002A6 (v01 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: DBG2 00000000bafd9000 000E9 (v00 LENOVO TP-G5 00002530 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43e5fffff]
[ 0.000000] NODE_DATA [mem 0x43e5ed000-0x43e5f1fff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e200000-ffff88043dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xa6b2ffff]
[ 0.000000] node 0: [mem 0x100000000-0x43e5fffff]
[ 0.000000] On node 0 totalpages: 4083403
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10597 pages used for memmap
[ 0.000000] DMA32 zone: 678191 pages, LIFO batch:31
[ 0.000000] Normal zone: 53144 pages used for memmap
[ 0.000000] Normal zone: 3401216 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa6b30000-0xbae9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbae9f000-0xbaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043e200000 s86464 r8192 d24128 u262144
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4019577
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=267f069c-11da-4d2a-88fa-00cab4e28149 rw quiet resume=/dev/sda6
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15995556K/16333612K available (5121K kernel code, 807K rwdata, 1708K rodata, 1144K init, 1288K bss, 338056K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 65536000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2694.031 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5390.56 BogoMIPS (lpj=8980103)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000034] AppArmor: AppArmor disabled by boot time parameter
[ 0.000035] Yama: becoming mindful.
[ 0.000923] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004551] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006146] Mount-cache hash table entries: 256
[ 0.006298] Initializing cgroup subsys memory
[ 0.006306] Initializing cgroup subsys devices
[ 0.006307] Initializing cgroup subsys freezer
[ 0.006309] Initializing cgroup subsys net_cls
[ 0.006310] Initializing cgroup subsys blkio
[ 0.006329] CPU: Physical Processor ID: 0
[ 0.006330] CPU: Processor Core ID: 0
[ 0.006334] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006663] mce: CPU supports 9 MCE banks
[ 0.006675] CPU0: Thermal monitoring enabled (TM1)
[ 0.006685] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.006786] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.007682] ACPI: Core revision 20130725
[ 0.013359] ACPI: All ACPI Tables successfully acquired
[ 0.014627] ftrace: allocating 20311 entries in 80 pages
[ 0.023669] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056667] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09)
[ 0.056673] TSC deadline timer enabled
[ 0.056680] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.056686] ... version: 3
[ 0.056687] ... bit width: 48
[ 0.056688] ... generic registers: 4
[ 0.056689] ... value mask: 0000ffffffffffff
[ 0.056689] ... max period: 0000ffffffffffff
[ 0.056690] ... fixed-purpose events: 3
[ 0.056691] ... event mask: 000000070000000f
[ 0.093731] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080104] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
[ 0.215283] Brought up 8 CPUs
[ 0.215286] smpboot: Total of 8 processors activated (43121.51 BogoMIPS)
[ 0.221817] devtmpfs: initialized
[ 0.225267] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)
[ 0.225908] RTC time: 22:50:45, date: 12/05/13
[ 0.225941] NET: Registered protocol family 16
[ 0.226022] cpuidle: using governor ladder
[ 0.226024] cpuidle: using governor menu
[ 0.226046] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.226048] ACPI: bus type PCI registered
[ 0.226050] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.226221] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.226224] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.230705] PCI: Using configuration type 1 for base access
[ 0.231329] bio: create slab <bio-0> at 0
[ 0.231442] ACPI: Added _OSI(Module Device)
[ 0.231443] ACPI: Added _OSI(Processor Device)
[ 0.231444] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.231445] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.232701] ACPI: EC: EC description table is found, configuring boot EC
[ 0.236337] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.272341] ACPI: SSDT 00000000bae3a018 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.272660] ACPI: Dynamic OEM Table Load:
[ 0.272661] ACPI: SSDT (null) 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.288532] ACPI: SSDT 00000000bae3ba98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.288874] ACPI: Dynamic OEM Table Load:
[ 0.288876] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.301731] ACPI: SSDT 00000000bae39d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.302048] ACPI: Dynamic OEM Table Load:
[ 0.302049] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.316012] ACPI: Interpreter enabled
[ 0.316018] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.316022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.316034] ACPI: (supports S0 S3 S4 S5)
[ 0.316035] ACPI: Using IOAPIC for interrupt routing
[ 0.316057] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.316633] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.328772] ACPI: Power Resource [PUBS] (on)
[ 0.332509] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.332575] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.332638] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.332701] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.332763] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.332812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.332874] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.332936] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.332972] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.333055] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.333132] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.333133] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.333260] PCI host bridge to bus 0000:00
[ 0.333262] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.333264] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.333265] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.333267] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.333268] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff]
[ 0.333270] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.333277] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.333338] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.333365] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.333416] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.333426] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.333432] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.333436] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 0.333514] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.333534] pci 0000:00:14.0: reg 0x10: [mem 0xf3a20000-0xf3a2ffff 64bit]
[ 0.333603] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.333630] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.333664] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.333686] pci 0000:00:16.0: reg 0x10: [mem 0xf3a35000-0xf3a3500f 64bit]
[ 0.333761] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.333815] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 0.333833] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
[ 0.333842] pci 0000:00:16.3: reg 0x14: [mem 0xf3a3c000-0xf3a3cfff]
[ 0.333964] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.333981] pci 0000:00:19.0: reg 0x10: [mem 0xf3a00000-0xf3a1ffff]
[ 0.333989] pci 0000:00:19.0: reg 0x14: [mem 0xf3a3b000-0xf3a3bfff]
[ 0.333997] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
[ 0.334058] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.334085] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.334117] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.334137] pci 0000:00:1a.0: reg 0x10: [mem 0xf3a3a000-0xf3a3a3ff]
[ 0.334226] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.334254] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.334287] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.334302] pci 0000:00:1b.0: reg 0x10: [mem 0xf3a30000-0xf3a33fff 64bit]
[ 0.334368] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.334400] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.334427] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.334502] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.334557] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.334632] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.334687] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.334762] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.334792] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.334829] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.334849] pci 0000:00:1d.0: reg 0x10: [mem 0xf3a39000-0xf3a393ff]
[ 0.334936] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.334965] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.334997] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.335148] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.335165] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
[ 0.335173] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
[ 0.335181] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
[ 0.335188] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
[ 0.335195] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 0.335203] pci 0000:00:1f.2: reg 0x24: [mem 0xf3a38000-0xf3a387ff]
[ 0.335246] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.335294] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.335309] pci 0000:00:1f.3: reg 0x10: [mem 0xf3a34000-0xf3a340ff 64bit]
[ 0.335329] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.335425] pci 0000:01:00.0: [10de:0ffb] type 00 class 0x030000
[ 0.335432] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[ 0.335439] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.335445] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.335450] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 0.335454] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.341690] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.341695] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.341700] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.341706] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.341865] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
[ 0.341884] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.341910] pci 0000:02:00.0: reg 0x10: [mem 0xf3101000-0xf31010ff]
[ 0.342112] pci 0000:02:00.0: supports D1 D2
[ 0.342113] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.342242] pci 0000:02:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.342268] pci 0000:02:00.3: reg 0x10: [mem 0xf3100000-0xf31007ff]
[ 0.342472] pci 0000:02:00.3: supports D1 D2
[ 0.342474] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.348460] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.348465] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.348469] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf39fffff]
[ 0.348475] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
[ 0.348567] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
[ 0.348614] pci 0000:03:00.0: reg 0x10: [mem 0xf3000000-0xf3001fff 64bit]
[ 0.348839] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.355042] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.355054] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.355151] acpiphp: Slot [1] registered
[ 0.355157] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.355162] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.355165] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
[ 0.355171] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.356013] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.356023] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.356059] Found 1 acpi root devices
[ 0.356106] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.356165] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.356169] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.356170] vgaarb: loaded
[ 0.356171] vgaarb: bridge control possible 0000:01:00.0
[ 0.356172] vgaarb: no bridge control possible 0000:00:02.0
[ 0.356199] PCI: Using ACPI for IRQ routing
[ 0.357682] PCI: pci_cache_line_size set to 64 bytes
[ 0.357820] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.357822] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.357823] e820: reserve RAM buffer [mem 0xa6b30000-0xa7ffffff]
[ 0.357824] e820: reserve RAM buffer [mem 0x43e600000-0x43fffffff]
[ 0.357892] NetLabel: Initializing
[ 0.357893] NetLabel: domain hash size = 128
[ 0.357894] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.357904] NetLabel: unlabeled traffic allowed by default
[ 0.357921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.357925] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.360952] Switched to clocksource hpet
[ 0.364213] pnp: PnP ACPI init
[ 0.364226] ACPI: bus type PNP registered
[ 0.364530] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.364532] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.364534] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.364535] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.364537] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.364538] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.364540] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.364541] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.364545] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.364546] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.364548] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.364549] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.364551] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.364552] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.364554] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
[ 0.364555] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.364557] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.364560] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.364624] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.364643] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 0.364644] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.364646] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.364647] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.364649] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.364651] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.364652] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.364654] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.364655] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.364657] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.364658] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.364661] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364703] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.364710] pnp 00:03: [dma 4]
[ 0.364723] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.364738] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.364763] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.364782] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.364803] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.364824] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.364860] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.365288] pnp: PnP ACPI: found 10 devices
[ 0.365290] ACPI: bus type PNP unregistered
[ 0.371588] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.371620] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[ 0.371622] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.371624] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.371627] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.371629] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.371632] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.371635] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.371640] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf39fffff]
[ 0.371644] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
[ 0.371650] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.371655] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.371663] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.371666] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.371671] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
[ 0.371675] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.371681] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.371683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.371684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.371686] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff]
[ 0.371687] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.371688] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.371690] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[ 0.371691] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.371693] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.371694] pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf39fffff]
[ 0.371695] pci_bus 0000:02: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref]
[ 0.371697] pci_bus 0000:03: resource 1 [mem 0xf3000000-0xf30fffff]
[ 0.371698] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.371700] pci_bus 0000:04: resource 1 [mem 0xf2800000-0xf2ffffff]
[ 0.371701] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.371726] NET: Registered protocol family 2
[ 0.371936] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.372200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.372304] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.372320] TCP: reno registered
[ 0.372335] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.372381] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.372455] NET: Registered protocol family 1
[ 0.372464] pci 0000:00:02.0: Boot video device
[ 0.372838] PCI: CLS 64 bytes, default 64
[ 0.372874] Unpacking initramfs...
[ 0.419708] Freeing initrd memory: 3172K (ffff8800379be000 - ffff880037cd7000)
[ 0.419712] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.419714] software IO TLB [mem 0xa2b30000-0xa6b30000] (64MB) mapped at [ffff8800a2b30000-ffff8800a6b2ffff]
[ 0.419965] Scanning for low memory corruption every 60 seconds
[ 0.420184] audit: initializing netlink socket (disabled)
[ 0.420191] type=2000 audit(1386283845.413:1): initialized
[ 0.430696] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.431915] zbud: loaded
[ 0.432021] VFS: Disk quotas dquot_6.5.2
[ 0.432054] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.432181] msgmni has been set to 31247
[ 0.432413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.432453] io scheduler noop registered
[ 0.432454] io scheduler deadline registered
[ 0.432473] io scheduler cfq registered (default)
[ 0.432595] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.432864] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.432875] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.432907] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.432908] vesafb: scrolling: redraw
[ 0.432909] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.433568] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c80000, using 8128k, total 8128k
[ 0.566342] Console: switching to colour frame buffer device 240x67
[ 0.698577] fb0: VESA VGA frame buffer device
[ 0.698590] intel_idle: MWAIT substates: 0x21120
[ 0.698591] intel_idle: v0.4 model 0x3A
[ 0.698592] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.698765] GHES: HEST is not enabled!
[ 0.698809] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.719500] 0000:00:16.3: ttyS0 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.719641] Linux agpgart interface v0.103
[ 0.719702] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.721201] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.721210] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.721298] mousedev: PS/2 mouse device common for all mice
[ 0.721324] rtc_cmos 00:06: RTC can wake from S4
[ 0.721444] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.721474] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.721482] Intel P-state driver initializing.
[ 0.721492] Intel pstate controlling: cpu 0
[ 0.721502] Intel pstate controlling: cpu 1
[ 0.721510] Intel pstate controlling: cpu 2
[ 0.721520] Intel pstate controlling: cpu 3
[ 0.721532] Intel pstate controlling: cpu 4
[ 0.721541] Intel pstate controlling: cpu 5
[ 0.721549] Intel pstate controlling: cpu 6
[ 0.721558] Intel pstate controlling: cpu 7
[ 0.721630] drop_monitor: Initializing network drop monitor service
[ 0.721685] TCP: cubic registered
[ 0.721757] NET: Registered protocol family 10
[ 0.721886] NET: Registered protocol family 17
[ 0.721894] Key type dns_resolver registered
[ 0.722224] registered taskstats version 1
[ 0.722596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.723178] Magic number: 9:534:855
[ 0.723283] rtc_cmos 00:06: setting system clock to 2013-12-05 22:50:46 UTC (1386283846)
[ 0.723323] PM: Checking hibernation image partition /dev/sda6
[ 0.726752] PM: Hibernation image not present or could not be loaded.
[ 0.727429] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.727431] Write protecting the kernel read-only data: 8192k
[ 0.729430] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
[ 0.730122] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
[ 0.737327] systemd-udevd[79]: starting version 208
[ 0.753625] ACPI: bus type USB registered
[ 0.753654] usbcore: registered new interface driver usbfs
[ 0.753672] usbcore: registered new interface driver hub
[ 0.753762] usbcore: registered new device driver usb
[ 0.754364] sdhci: Secure Digital Host Controller Interface driver
[ 0.754367] sdhci: Copyright(c) Pierre Ossman
[ 0.754471] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
[ 0.754490] SCSI subsystem initialized
[ 0.754718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.755262] ehci-pci: EHCI PCI platform driver
[ 0.755386] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.755406] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.755414] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.755427] ehci-pci 0000:00:1a.0: debug port 2
[ 0.756165] libata version 3.00 loaded.
[ 0.759355] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.759370] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3a3a000
[ 0.767505] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.767646] hub 1-0:1.0: USB hub found
[ 0.767652] hub 1-0:1.0: 3 ports detected
[ 0.767804] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.767809] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.767812] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.767823] ehci-pci 0000:00:1d.0: debug port 2
[ 0.771708] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.771720] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3a39000
[ 0.780896] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.780996] hub 2-0:1.0: USB hub found
[ 0.781000] hub 2-0:1.0: 3 ports detected
[ 0.781193] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.781197] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.781202] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.781297] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.781317] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 0.781456] hub 3-0:1.0: USB hub found
[ 0.781467] hub 3-0:1.0: 4 ports detected
[ 0.781705] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.781708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.781799] hub 4-0:1.0: USB hub found
[ 0.781807] hub 4-0:1.0: 4 ports detected
[ 0.791001] ahci 0000:00:1f.2: version 3.0
[ 0.791067] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.791088] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.804224] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 0.804231] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
[ 0.804239] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.820938] firewire_ohci 0000:02:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 0.820989] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 5)
[ 0.821107] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.824627] scsi0 : ahci
[ 0.824773] scsi1 : ahci
[ 0.824907] scsi2 : ahci
[ 0.825041] scsi3 : ahci
[ 0.825234] scsi4 : ahci
[ 0.825350] scsi5 : ahci
[ 0.825384] ata1: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38100 irq 42
[ 0.825387] ata2: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38180 irq 42
[ 0.825390] ata3: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38200 irq 42
[ 0.825391] ata4: DUMMY
[ 0.825406] ata5: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38300 irq 42
[ 0.825406] ata6: DUMMY
[ 1.074138] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.144102] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.145449] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.145455] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.146823] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133
[ 1.146827] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.148298] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.148304] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.149813] ata1.00: configured for UDMA/133
[ 1.150087] scsi 0:0:0:0: Direct-Access ATA HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5
[ 1.198525] hub 1-1:1.0: USB hub found
[ 1.198715] hub 1-1:1.0: 6 ports detected
[ 1.307453] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.320895] firewire_core 0000:02:00.3: created device fw0: GUID 3c970effbe0ba2ff, S400
[ 1.420670] tsc: Refined TSC clocksource calibration: 2693.881 MHz
[ 1.431513] hub 2-1:1.0: USB hub found
[ 1.431588] hub 2-1:1.0: 8 ports detected
[ 1.467351] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.471615] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.473091] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.476312] ata2.00: ATAPI: HL-DT-ST DVDRAM GT80N, LT20, max UDMA/133
[ 1.480154] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.481633] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.484853] ata2.00: configured for UDMA/133
[ 1.493873] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N LT20 PQ: 0 ANSI: 5
[ 1.590645] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[ 1.611303] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.611311] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.613287] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.623187] usbcore: registered new interface driver usbhid
[ 1.623191] usbhid: USB HID core driver
[ 1.623948] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input2
[ 1.624086] hid-generic 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
[ 1.624501] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input3
[ 1.624758] hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
[ 1.677468] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.813904] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.814517] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.814523] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.814902] ata3.00: ATA-8: SAMSUNG MZMPC032HBCD-000L1, CXM13L1Q, max UDMA/133
[ 1.814908] ata3.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.815417] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.815424] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.815843] ata3.00: configured for UDMA/133
[ 1.815996] scsi 2:0:0:0: Direct-Access ATA SAMSUNG MZMPC032 CXM1 PQ: 0 ANSI: 5
[ 1.827413] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.980746] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.133788] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.138079] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.138084] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.138107] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.138214] sd 0:0:0:0: [sda] Write Protect is off
[ 2.138218] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.138263] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.138291] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.138294] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.138365] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.139366] sdb: sdb1
[ 2.139583] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.140832] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.140834] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.140984] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.150609] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
[ 2.217042] raid6: sse2x1 6045 MB/s
[ 2.222964] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.224086] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.242780] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4
[ 2.242927] hid-generic 0003:046D:C051.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 2.273683] raid6: sse2x2 9288 MB/s
[ 2.330330] raid6: sse2x4 13180 MB/s
[ 2.330331] raid6: using algorithm sse2x4 (13180 MB/s)
[ 2.330332] raid6: using ssse3x2 recovery algorithm
[ 2.330416] xor: automatically using best checksumming function:
[ 2.363659] avx : 27280.800 MB/sec
[ 2.365888] bio: create slab <bio-1> at 1
[ 2.366416] Btrfs loaded
[ 2.366872] btrfs: device fsid 267f069c-11da-4d2a-88fa-00cab4e28149 devid 1 transid 2746 /dev/sdb1
[ 2.420417] Switched to clocksource tsc
[ 2.749348] btrfs: device fsid f6907d81-f46f-4911-8600-858e8b6bd1a0 devid 1 transid 3707 /dev/sda5
[ 3.007064] PM: Starting manual resume from disk
[ 3.007067] PM: Hibernation image partition 8:6 present
[ 3.007068] PM: Looking for hibernation image.
[ 3.007178] PM: Image not found (code -22)
[ 3.007183] PM: Hibernation image not present or could not be loaded.
[ 3.014955] btrfs: device fsid 267f069c-11da-4d2a-88fa-00cab4e28149 devid 1 transid 2746 /dev/sdb1
[ 3.015285] btrfs: disk space caching is enabled
[ 3.028402] Btrfs detected SSD devices, enabling SSD mode
[ 3.211825] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.212136] systemd[1]: Set hostname to <ho-think>.
[ 3.252550] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.252605] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.252618] systemd[1]: Starting Remote File Systems.
[ 3.252629] systemd[1]: Reached target Remote File Systems.
[ 3.252638] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.252667] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.252675] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.252701] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.252709] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.252724] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.252731] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.252748] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.252758] systemd[1]: Starting Journal Socket.
[ 3.252795] systemd[1]: Listening on Journal Socket.
[ 3.253090] systemd[1]: Starting Apply Kernel Variables...
[ 3.253532] systemd[1]: Starting Journal Service...
[ 3.253811] systemd[1]: Started Journal Service.
[ 3.287546] systemd-journald[182]: Vacuuming done, freed 0 bytes
[ 3.390618] btrfs: use ssd allocation scheme
[ 3.390622] btrfs: disk space caching is enabled
[ 3.400329] systemd-udevd[218]: starting version 208
[ 3.490322] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.491089] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.491746] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 3.491865] ACPI: Lid Switch [LID]
[ 3.492466] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130725/utaddress-251)
[ 3.492471] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.492475] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 3.492490] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.492491] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 3.492494] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.492495] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.493000] pps_core: LinuxPPS API ver. 1 registered
[ 3.493002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.493659] ACPI: Requesting acpi_cpufreq
[ 3.493823] PTP clock support registered
[ 3.494020] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[ 3.494025] ACPI: Sleep Button [SLPB]
[ 3.494069] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 3.494071] ACPI: Power Button [PWRF]
[ 3.494675] mei_me 0000:00:16.0: setting latency timer to 64
[ 3.494714] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 3.494990] ACPI: AC Adapter [AC] (on-line)
[ 3.495691] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[ 3.498616] Non-volatile memory driver v1.3
[ 3.498683] [drm] Initialized drm 1.1.0 20060810
[ 3.499437] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 3.502565] ACPI: Battery Slot [BAT0] (battery present)
[ 3.502633] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 3.502635] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.502636] thinkpad_acpi: ThinkPad BIOS G5ET93WW (2.53 ), EC unknown
[ 3.502637] thinkpad_acpi: Lenovo ThinkPad W530, model 2447DW0
[ 3.504741] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.504742] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 3.504806] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.504855] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.504869] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3.505719] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 3.505814] thinkpad_acpi: radio switch found; radios are enabled
[ 3.507612] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.507614] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.508991] wmi: Mapper loaded
[ 3.510574] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 3.512202] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 3.512859] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.512862] ACPI: Thermal Zone [THM0] (51 C)
[ 3.512964] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.513826] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[ 3.519211] cfg80211: Calling CRDA to update world regulatory domain
[ 3.529719] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 3.529721] Copyright(c) 2003-2013 Intel Corporation
[ 3.529746] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[ 3.529786] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.529839] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[ 3.541982] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[ 3.557020] media: Linux media interface: v0.10
[ 3.559314] Bluetooth: Core ver 2.16
[ 3.559324] NET: Registered protocol family 31
[ 3.559325] Bluetooth: HCI device and connection manager initialized
[ 3.559331] Bluetooth: HCI socket layer initialized
[ 3.559332] Bluetooth: L2CAP socket layer initialized
[ 3.559338] Bluetooth: SCO socket layer initialized
[ 3.559760] Linux video capture interface: v2.00
[ 3.561090] btrfs: device fsid 267f069c-11da-4d2a-88fa-00cab4e28149 devid 1 transid 2747 /dev/sdb1
[ 3.563306] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 3.565201] usbcore: registered new interface driver btusb
[ 3.565757] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 3.567801] iTCO_vendor_support: vendor-support=0
[ 3.568229] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11
[ 3.568341] usbcore: registered new interface driver uvcvideo
[ 3.568342] USB Video Class driver (1.1.1)
[ 3.568802] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 3.568825] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.568884] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.575973] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[ 3.579387] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[ 3.580314] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[ 3.580610] nvidia: module license 'NVIDIA' taints kernel.
[ 3.580612] Disabling lock debugging due to kernel taint
[ 3.580964] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x17
[ 3.581262] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x17
[ 3.581662] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x17
[ 3.581969] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x17
[ 3.582235] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.585585] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 3.585626] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 3.585753] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 3.585756] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
[ 3.590299] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 3.604935] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 3.604939] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 3.604940] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 3.604942] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 3.604991] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 3.611807] kvm: disabled by bios
[ 3.622449] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.643289] systemd-udevd[222]: renamed network interface wlan0 to wlp3s0
[ 3.699041] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 3.699043] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:be:0b:a2
[ 3.699045] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.699088] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 3.699268] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 3.710237] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 3.713994] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 3.714087] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 3.714189] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 3.714267] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 3.715362] [drm] Memory usable by graphics device = 2048M
[ 3.715365] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 3.715366] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.715377] Console: switching to colour dummy device 80x25
[ 3.715649] i915 0000:00:02.0: setting latency timer to 64
[ 3.729949] systemd-udevd[222]: renamed network interface eth0 to enp0s25
[ 3.732501] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 3.732509] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.732510] [drm] Driver supports precise vblank timestamp query.
[ 3.819873] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 3.834766] fbcon: inteldrmfb (fb0) is primary device
[ 4.010110] Adding 19791892k swap on /dev/sda6. Priority:-1 extents:1 across:19791892k FS
[ 4.049143] btrfs: device fsid f6907d81-f46f-4911-8600-858e8b6bd1a0 devid 1 transid 3707 /dev/sda5
[ 4.051716] btrfs: device fsid f6907d81-f46f-4911-8600-858e8b6bd1a0 devid 1 transid 3707 /dev/sda5
[ 4.052121] btrfs: disk space caching is enabled
[ 4.321118] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
[ 4.321124] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 4.360011] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 4.693049] Console: switching to colour frame buffer device 240x67
[ 4.701433] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.701436] i915 0000:00:02.0: registered panic notifier
[ 4.733613] acpi device:01: registered as cooling_device9
[ 4.733720] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.733800] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input18
[ 4.735322] acpi device:0b: registered as cooling_device10
[ 4.735443] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[ 4.735613] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input19
[ 4.735774] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[ 5.349702] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 5.885751] systemd-journald[182]: Received request to flush runtime journal from PID 1
[ 6.387466] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.489072] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.489318] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6.491213] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 6.497839] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 6.562460] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[ 6.567737] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 6.567820] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 6.567879] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 6.567936] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 6.567992] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 6.568200] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 6.568403] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 6.568461] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 6.717420] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 6.724113] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 6.817316] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7.218443] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 8.524298] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.725509] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
[ 9.854318] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 9.854359] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 11.111145] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 11.137094] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 11.137100] NVRM: os_pci_init_handle: invalid context!
[ 11.137102] NVRM: os_pci_init_handle: invalid context!
[ 11.137106] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 11.137108] NVRM: os_pci_init_handle: invalid context!
[ 11.137109] NVRM: os_pci_init_handle: invalid context!
[ 11.162561] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
[ 11.162570] NVRM: rm_init_adapter failed for device bearing minor number 0
[ 11.162590] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5/etc/X11/xorg.conf.d/20-nvidia.conf
Section "Device"
Identifier "Nvidia Card"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
EndSectionlspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K2000M] (rev ff)
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 08)
02:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 3e)I did try to set `rcutree.rcu_idle_gp_delay=1` as kernel parameter as mentioned in some posts for older nvidia / kernel versions, but this did not change the situation of the error messages.
Last edited by brandsmeier (2013-12-06 17:45:44)
Offline
I decided to use nouveau instead of nvidia and now I got my external an internal display working.
Offline