You are not logged in.
I have problem whit keyboard typing leaking back to terminal which started x. This causes x to paint 1/3 of screen black whit dot lines that change on typing keyboard. also using ctrl-c will kill x. problem does not exist if I start x as supers user(I know, big security hole). I think it is some sort of file permission problem. This problem came after upgrade of of xserver and kernel.
Any Ideas where to start dig for solution?
I tried to fix this proplems whit:
reinstalling nvidia drivers.
downgrading Xserver and kernel.
using diverent window manager
starting linux whit nomodeset
none of these worked
Machine info
enetlaptop
description: Notebook
product: N51Vf
vendor: ASUSTeK Computer Inc.
version: 1.0
width: 32 bits
capabilities: smbios-2.5 dmi-2.5 smp-1.4 smp
configuration: chassis=notebook cpus=2 uuid=00AB243E-D357-DE81-26C6-002618394628
*-core
description: Motherboard
product: N51Vf
vendor: ASUSTeK Computer Inc.
version: 1.0
slot: MIDDLE
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 301
date: 03/10/2009
size: 64KiB
capacity: 960KiB
capabilities: isa pci pnp upgrade shadowing escd cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb smartbattery biosbootspecification netboot
*-cpu:0
description: CPU
product: Core 2 Duo (To Be Filled By O.E.M.)
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.15.13slot: CPU 1
size: 2200MHz
capacity: 2200MHz
width: 64 bits
clock: 200MHz
capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq
configuration: cores=2 enabledcores=2 id=1 threads=2
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 64KiB
capacity: 64KiB
capabilities: internal write-back data
*-cache:1
description: L2 cache
physical id: 7
slot: L2-Cache
size: 2MiB
capacity: 2MiB
capabilities: internal write-back unified
*-memory
description: System Memory
physical id: 1c
slot: System board or motherboard
size: 4GiB
*-bank:0
description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns)
slot: DIMM0
size: 2GiB
width: 64 bits
clock: 800MHz (1.2ns)
*-bank:1
description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns)
slot: DIMM1
size: 2GiB
width: 64 bits
clock: 800MHz (1.2ns)
*-pci
description: Host bridge
product: Mobile 4 Series Chipset Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 07
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: Mobile 4 Series Chipset PCI Express Graphics Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 07
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:40 ioport:b000(size=4096) memory:fa000000-fdefffff ioport:d0000000(size=268435456)
*-display
description: VGA compatible controller
product: G96M [GeForce GT 130M]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:50 memory:fc000000-fcffffff memory:d0000000-dfffffff memory:fa000000-fbffffff ioport:bc00(size=128) memory:fde80000-fdefffff
*-usb:0
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:ac00(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.12.1-3-ARCH uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 3.12
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:1
...
*-usb:2
...
*-usb:3
...
*-multimedia
description: Audio device
product: 82801I (ICH9 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 03
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:48 memory:f9ff8000-f9ffbfff
*-pci:1
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:41
*-pci:2
...
*-network
...
*-pci:3
...
*-pci:4
...
*-pci:5
...
*-pci:6
...
*-firewire
description: FireWire (IEEE 1394)
product: R5C832 IEEE 1394 Controller
vendor: Ricoh Co Ltd
physical id: 1
bus info: pci@0000:09:01.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=32 maxlatency=4 mingnt=2
resources: irq:16 memory:febff800-febfffff
*-generic:0
description: SD Host controller
product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
vendor: Ricoh Co Ltd
physical id: 1.1
bus info: pci@0000:09:01.1
version: 22
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=sdhci-pci latency=64
resources: irq:17 memory:febff400-febff4ff
*-generic:1
description: System peripheral
product: R5C592 Memory Stick Bus Host Adapter
vendor: Ricoh Co Ltd
physical id: 1.2
bus info: pci@0000:09:01.2
version: 12
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=r592 latency=64
resources: irq:17 memory:febfec00-febfecff
*-generic:2 UNCLAIMED
description: System peripheral
product: xD-Picture Card Controller
vendor: Ricoh Co Ltd
physical id: 1.3
bus info: pci@0000:09:01.3
version: 12
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=64
resources: memory:febfe800-febfe8ff
*-isa
description: ISA bridge
product: ICH9M LPC Interface Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-storage
description: SATA controller
product: 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 03
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:47 ioport:a000(size=8) ioport:9c00(size=4) ioport:9880(size=8) ioport:9800(size=4) ioport:9480(size=32) memory:f9fff000-f9fff7ff
*-battery
description: Other Battery
product: N50--24
vendor: AS012DJ33E
physical id: 1
version: 09/04/23
serial: 0901
slot: Left side of System
capacity: 4660mWh
configuration: voltage=11.1VXorg.log.0
% sudo cat /var/log/Xorg.0.log !4236
[ 667.318]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 667.318] X Protocol Version 11, Revision 0
[ 667.319] Build Operating System: Linux 3.11.1-1-ARCH i686
[ 667.319] Current Operating System: Linux EnetLaptop 3.12.1-3-ARCH #1 SMP PREEMPT Tue Nov 26 11:40:55 CET 2013 i686
[ 667.319] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/enet_laptop-root ro
[ 667.319] Build Date: 08 October 2013 08:51:37PM
[ 667.319]
[ 667.319] Current version of pixman: 0.32.4
[ 667.319] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 667.319] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 667.319] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 4 16:29:10 2013
[ 667.319] (==) Using config file: "/etc/X11/xorg.conf"
[ 667.319] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 667.319] (==) No Layout section. Using the first Screen section.
[ 667.319] (**) |-->Screen "Screen0" (0)
[ 667.319] (**) | |-->Monitor "Monitor0"
[ 667.319] (**) | |-->Device "Device0"
[ 667.319] (==) Automatically adding devices
[ 667.320] (==) Automatically enabling devices
[ 667.320] (==) Automatically adding GPU devices
[ 667.320] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 667.320] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 667.320] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 667.320] (II) Loader magic: 0x8259620
[ 667.320] (II) Module ABI versions:
[ 667.320] X.Org ANSI C Emulation: 0.4
[ 667.320] X.Org Video Driver: 14.1
[ 667.320] X.Org XInput driver : 19.1
[ 667.320] X.Org Server Extension : 7.0
[ 667.320] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 667.322] (--) PCI:*(0:1:0:0) 10de:0652:1043:1a12 rev 161, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 667.322] Initializing built-in extension Generic Event Extension
[ 667.322] Initializing built-in extension SHAPE
[ 667.322] Initializing built-in extension MIT-SHM
[ 667.322] Initializing built-in extension XInputExtension
[ 667.322] Initializing built-in extension XTEST
[ 667.322] Initializing built-in extension BIG-REQUESTS
[ 667.322] Initializing built-in extension SYNC
[ 667.322] Initializing built-in extension XKEYBOARD
[ 667.322] Initializing built-in extension XC-MISC
[ 667.322] Initializing built-in extension SECURITY
[ 667.322] Initializing built-in extension XINERAMA
[ 667.322] Initializing built-in extension XFIXES
[ 667.322] Initializing built-in extension RENDER
[ 667.322] Initializing built-in extension RANDR
[ 667.322] Initializing built-in extension COMPOSITE
[ 667.322] Initializing built-in extension DAMAGE
[ 667.322] Initializing built-in extension MIT-SCREEN-SAVER
[ 667.322] Initializing built-in extension DOUBLE-BUFFER
[ 667.322] Initializing built-in extension RECORD
[ 667.322] Initializing built-in extension DPMS
[ 667.322] Initializing built-in extension X-Resource
[ 667.322] Initializing built-in extension XVideo
[ 667.322] Initializing built-in extension XVideo-MotionCompensation
[ 667.322] Initializing built-in extension XFree86-VidModeExtension
[ 667.322] Initializing built-in extension XFree86-DGA
[ 667.322] Initializing built-in extension XFree86-DRI
[ 667.322] Initializing built-in extension DRI2
[ 667.322] (II) LoadModule: "glx"
[ 667.323] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 667.355] (II) Module glx: vendor="NVIDIA Corporation"
[ 667.355] compiled for 4.0.2, module version = 1.0.0
[ 667.355] Module class: X.Org Server Extension
[ 667.355] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:53:40 PDT 2013
[ 667.355] Loading extension GLX
[ 667.355] (II) LoadModule: "nvidia"
[ 667.356] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 667.356] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 667.356] compiled for 4.0.2, module version = 1.0.0
[ 667.356] Module class: X.Org Video Driver
[ 667.356] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:32:26 PDT 2013
[ 667.356] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 667.356] (++) using VT number 3
[ 667.356] (II) Loading sub module "fb"
[ 667.356] (II) LoadModule: "fb"
[ 667.356] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 667.357] (II) Module fb: vendor="X.Org Foundation"
[ 667.357] compiled for 1.14.3, module version = 1.0.0
[ 667.357] ABI class: X.Org ANSI C Emulation, version 0.4
[ 667.357] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 667.357] (II) Loading sub module "wfb"
[ 667.357] (II) LoadModule: "wfb"
[ 667.357] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 667.357] (II) Module wfb: vendor="X.Org Foundation"
[ 667.357] compiled for 1.14.3, module version = 1.0.0
[ 667.357] ABI class: X.Org ANSI C Emulation, version 0.4
[ 667.357] (II) Loading sub module "ramdac"
[ 667.357] (II) LoadModule: "ramdac"
[ 667.357] (II) Module "ramdac" already built-in
[ 667.357] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 667.357] (==) NVIDIA(0): RGB weight 888
[ 667.357] (==) NVIDIA(0): Default visual is TrueColor
[ 667.357] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 667.357] (**) NVIDIA(0): Option "Stereo" "0"
[ 667.358] (**) NVIDIA(0): Stereo disabled by request
[ 667.358] (**) NVIDIA(0): Option "MetaModes" "1366x768 +0+0"
[ 667.358] (**) NVIDIA(0): Enabling 2D acceleration
[ 668.166] (II) NVIDIA(0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
[ 668.166] (II) NVIDIA(0): support NVIDIA 3D Vision stereo.
[ 668.166] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 668.168] (II) NVIDIA(0): NVIDIA GPU GeForce GT 130M (G96) at PCI:1:0:0 (GPU-0)
[ 668.168] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 668.168] (--) NVIDIA(0): VideoBIOS: 62.94.6e.00.11
[ 668.168] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 668.169] (--) NVIDIA(0): Valid display device(s) on GeForce GT 130M at PCI:1:0:0
[ 668.169] (--) NVIDIA(0): CRT-0
[ 668.169] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0) (boot, connected)
[ 668.169] (--) NVIDIA(0): DFP-1
[ 668.169] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 668.169] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link LVDS
[ 668.170] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel clock
[ 668.170] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 668.170] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 668.170] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 668.170] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 668.170] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 668.170] (II) NVIDIA(0): Validated MetaModes:
[ 668.170] (II) NVIDIA(0): "1366x768+0+0"
[ 668.170] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 669.220] (--) NVIDIA(0): DPI set to (99, 102); computed from "UseEdidDpi" X config
[ 669.220] (--) NVIDIA(0): option
[ 669.220] (--) Depth 24 pixmap format is 32 bpp
[ 669.220] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 669.224] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 669.224] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 669.224] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 669.224] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 669.224] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 669.224] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 669.224] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 669.224] (II) NVIDIA(0): Config Options in the README.
[ 669.226] (II) NVIDIA(0): Setting mode "1366x768+0+0"
[ 669.530] Loading extension NV-GLX
[ 669.555] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 669.555] (==) NVIDIA(0): Backing store disabled
[ 669.555] (==) NVIDIA(0): Silken mouse enabled
[ 669.555] (**) NVIDIA(0): DPMS enabled
[ 669.555] Loading extension NV-CONTROL
[ 669.556] Loading extension XINERAMA
[ 669.556] (II) Loading sub module "dri2"
[ 669.556] (II) LoadModule: "dri2"
[ 669.556] (II) Module "dri2" already built-in
[ 669.556] (II) NVIDIA(0): [DRI2] Setup complete
[ 669.556] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 669.556] (--) RandR disabled
[ 669.565] (II) Initializing extension GLX
[ 669.683] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 669.683] (**) Power Button: Applying InputClass "system-keyboard"
[ 669.684] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 669.684] (II) LoadModule: "evdev"
[ 669.684] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 669.684] (II) Module evdev: vendor="X.Org Foundation"
[ 669.684] compiled for 1.14.3, module version = 2.8.2
[ 669.684] Module class: X.Org XInput Driver
[ 669.684] ABI class: X.Org XInput driver, version 19.1
[ 669.684] (II) Using input driver 'evdev' for 'Power Button'
[ 669.684] (**) Power Button: always reports core events
[ 669.684] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 669.684] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 669.684] (--) evdev: Power Button: Found keys
[ 669.684] (II) evdev: Power Button: Configuring as keyboard
[ 669.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 669.684] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 669.684] (**) Option "xkb_rules" "evdev"
[ 669.684] (**) Option "xkb_model" "pc104"
[ 669.684] (**) Option "xkb_layout" "fi"
[ 669.709] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 669.709] (**) Video Bus: Applying InputClass "system-keyboard"
[ 669.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 669.709] (II) Using input driver 'evdev' for 'Video Bus'
[ 669.709] (**) Video Bus: always reports core events
[ 669.709] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 669.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 669.709] (--) evdev: Video Bus: Found keys
[ 669.709] (II) evdev: Video Bus: Configuring as keyboard
[ 669.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input9/event5"
[ 669.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 669.709] (**) Option "xkb_rules" "evdev"
[ 669.709] (**) Option "xkb_model" "pc104"
[ 669.709] (**) Option "xkb_layout" "fi"
[ 669.710] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 669.710] (II) No input driver specified, ignoring this device.
[ 669.710] (II) This device may have been added with another device file.
[ 669.710] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 669.710] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 669.710] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 669.710] (II) Using input driver 'evdev' for 'Sleep Button'
[ 669.710] (**) Sleep Button: always reports core events
[ 669.710] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 669.710] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 669.710] (--) evdev: Sleep Button: Found keys
[ 669.710] (II) evdev: Sleep Button: Configuring as keyboard
[ 669.710] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event1"
[ 669.710] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 669.710] (**) Option "xkb_rules" "evdev"
[ 669.710] (**) Option "xkb_model" "pc104"
[ 669.710] (**) Option "xkb_layout" "fi"
[ 669.711] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 669.711] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 669.711] (II) No input driver specified, ignoring this device.
[ 669.711] (II) This device may have been added with another device file.
[ 669.711] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 669.711] (II) No input driver specified, ignoring this device.
[ 669.711] (II) This device may have been added with another device file.
[ 669.711] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[ 669.711] (II) No input driver specified, ignoring this device.
[ 669.711] (II) This device may have been added with another device file.
[ 669.712] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 Phantom (/dev/input/event7)
[ 669.712] (II) No input driver specified, ignoring this device.
[ 669.712] (II) This device may have been added with another device file.
[ 669.712] (II) config/udev: Adding input device CNF7246 (/dev/input/event12)
[ 669.712] (**) CNF7246: Applying InputClass "system-keyboard"
[ 669.712] (**) CNF7246: Applying InputClass "evdev keyboard catchall"
[ 669.712] (II) Using input driver 'evdev' for 'CNF7246'
[ 669.712] (**) CNF7246: always reports core events
[ 669.712] (**) evdev: CNF7246: Device: "/dev/input/event12"
[ 669.712] (--) evdev: CNF7246: Vendor 0x4f2 Product 0xb106
[ 669.712] (--) evdev: CNF7246: Found keys
[ 669.712] (II) evdev: CNF7246: Configuring as keyboard
[ 669.712] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input19/event12"
[ 669.712] (II) XINPUT: Adding extended input device "CNF7246" (type: KEYBOARD, id 9)
[ 669.712] (**) Option "xkb_rules" "evdev"
[ 669.712] (**) Option "xkb_model" "pc104"
[ 669.712] (**) Option "xkb_layout" "fi"
[ 669.713] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event4)
[ 669.713] (**) Asus Laptop extra buttons: Applying InputClass "system-keyboard"
[ 669.713] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 669.713] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 669.713] (**) Asus Laptop extra buttons: always reports core events
[ 669.713] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event4"
[ 669.713] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[ 669.713] (--) evdev: Asus Laptop extra buttons: Found keys
[ 669.713] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[ 669.713] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input8/event4"
[ 669.713] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 10)
[ 669.713] (**) Option "xkb_rules" "evdev"
[ 669.713] (**) Option "xkb_model" "pc104"
[ 669.713] (**) Option "xkb_layout" "fi"
[ 669.713] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 669.713] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 669.713] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 669.713] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 669.713] (**) AT Translated Set 2 keyboard: always reports core events
[ 669.713] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 669.714] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 669.714] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 669.714] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 669.714] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 669.714] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 669.714] (**) Option "xkb_rules" "evdev"
[ 669.714] (**) Option "xkb_model" "pc104"
[ 669.714] (**) Option "xkb_layout" "fi"
[ 669.714] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 669.714] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 669.714] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 669.714] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 669.714] (II) LoadModule: "synaptics"
[ 669.714] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 669.714] (II) Module synaptics: vendor="X.Org Foundation"
[ 669.714] compiled for 1.14.1, module version = 1.7.1
[ 669.714] Module class: X.Org XInput Driver
[ 669.714] ABI class: X.Org XInput driver, version 19.1
[ 669.715] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 669.715] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 669.715] (**) Option "Device" "/dev/input/event11"
[ 669.786] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 72)
[ 669.787] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5046 (res 107)
[ 669.787] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 669.787] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 669.787] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 669.787] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 669.787] (**) Option "VertEdgeScroll" "on"
[ 669.787] (**) Option "HorizEdgeScroll" "on"
[ 669.787] (**) Option "VertTwoFingerScroll" "on"
[ 669.787] (**) Option "HorizTwoFingerScroll" "on"
[ 669.787] (**) Option "TapButton1" "1"
[ 669.787] (**) Option "TapButton2" "-1"
[ 669.787] (**) Option "TapButton3" "2"
[ 669.787] (**) Option "PalmDetect" "1"
[ 669.787] (**) Option "PalmMinWidth" "8"
[ 669.787] (**) Option "PalmMinZ" "150"
[ 669.787] (**) Option "CoastingSpeed" "1"
[ 669.787] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 669.787] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 669.840] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input18/event11"
[ 669.840] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 669.840] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 669.840] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 669.840] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 669.840] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 669.840] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 669.840] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 669.840] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 669.841] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 669.841] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 669.841] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 669.842] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 669.842] (II) No input driver specified, ignoring this device.
[ 669.842] (II) This device may have been added with another device file.
[ 669.925] (II) NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
[ 669.925] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.kernel
Linux version 3.12.1-3-ARCH (tobias@testing-i686) (gcc version 4.8.2 (GCC) ) SMP PREEMPT Tue Nov 26 11:40:55 CET 2013ATM using latest updates and newest packages.
Last edited by esa-petri (2013-12-11 19:58:20)
Offline
for some mystical reason hibernation/susbend sometimes stops artifacts till next reboot or hibernation/susbend
Offline
I have kmsconvt installed and running(i like it :-) ) instead getty and maybe that is proplem since all TTY's behave bad after x is running. whit bad I mean that input from one tty leaks to another, and image does also leak. I gota try if swithing back to getty and see if it helps.
and as wiki tells kmscon uses kms(kernel mode set ) which doesn't have good reputation whit closed source Nvidia(or AMD) drivers
https://wiki.archlinux.org/index.php/KMSCON
Starting X from getty seems to work just nice, so I asume it is KMSCON bug.
I reported bug on KMSCON git hub page: https://github.com/dvdhrm/kmscon/issues/105
Last edited by esa-petri (2013-12-11 19:57:40)
Offline