You are not logged in.
I'm configuring xmobar to my needs as shown in my configuration file:
Config { font = "-*-Fixed-Bold-R-Normal-*-13-*-*-*-*-*-*-*"
, bgColor = "black"
, fgColor = "grey"
, position = Static{xpos=0, ypos=0, width=1905, height=16}
, lowerOnStart = True
, commands = [ Run Cpu ["-L","3","-H","50","--normal","green","--high","red"] 10
, Run Memory ["-t","<usedratio>%"] 10
, Run Date "%a %b %_d %Y %H:%M:%S" 10
, Run Com "/home/josealejandro93/scripts/volume.sh" [] "volume" 10
, Run Com "/home/josealejandro93/scripts/bstatus.sh" [] "bstatus" 10
, Run Battery ["-t","<left>%","-L","50","-H","75","-h","green","-n","yell","-l","red"] "battery" 10
, Run Com "/home/josealejandro93/scripts/brightness.sh" [] "bright" 10
, Run Com "/home/josealejandro93/scripts/user.sh" [] "user" 500
, Run StdinReader
]
, sepChar = "%"
, alignSep = "}{"
, template = "%StdinReader%}<fc=#ee9a00>%date%</fc>{Vol: <fc=green>%volume%</fc> | [Bat: %battery% | Status: %bstatus%] | Brightness: <fc=green>%bright%</fc> | [%cpu% | Mem: <fc=green>%memory%</fc>] | <fc=#ff0000>%user%</fc> "I can't see anything wrong in that code but Xmobar is not starting (previously it was, after a reboot my battery indicator was not working so I tried to mess around with the configuration file and broke it). When I run
xmobar config.file I get:
configuration file contains errors at:
"Config" (line 16, column 10):
unexpected "s"
expecting space or "Run"But I don't see why it should be asking for a space or a
Runsince I'm closing the commands list one line above.
This file was made with emacs and I also ran dos2unix on it since I thought that maybe the new-line character was causing this problem but still got the same result.
Do you think that maybe I should try another editor like nano? I have never had this kind of problems with emacs before so it's quite strange.
Thanks in advance for your help!
Last edited by josealejandro93 (2013-12-14 19:25:42)
Offline
On the Battery line, remove "battery":
Run Battery ["-t","<left>%","-L","50","-H","75","-h","green","-n","yell","-l","red"] 10On the Date line, add "date":
Run Date "%a %b %_d %Y %H:%M:%S" "date" 10Without having your scripts, this is all that I can check.
Last edited by skottish (2013-12-14 18:18:58)
Offline
On the Battery line, remove "battery":
Run Battery ["-t","<left>%","-L","50","-H","75","-h","green","-n","yell","-l","red"] 10On the Date line, add "date":
Run Date "%a %b %_d %Y %H:%M:%S" "date" 10Without having your scripts, this is all that I can check.
Did those changes, still same issue.
I didn't think my scripts would be the problem since I saw them working previously but here they are:
brightness.sh
#! /bin/bash
max=`cat /sys/class/backlight/acpi_video0/max_brightness`
act=`cat /sys/class/backlight/acpi_video0/actual_brightness`
echo "${act}/${max}"bstatus.sh
#! /bin/bash
str=`cat /sys/class/power_supply/BAT1/status`
echo $strusername.sh
#!/bin/bash
user=`whoami`
str=`getent passwd $user`
IFS=:
ary=($str)
echo ${ary[4]}volume.sh
#! /usr/bin/bash
str=`amixer sget Master`
str1=${str#Simple*\[}
v1=${str1%%]*]}
echo $v1Also, as a side question. Is it possible to run python scripts like
Run Com "/bin/bash /home/user/scripts/script.py" [] "doStuff"Last edited by josealejandro93 (2013-12-14 18:32:45)
Offline
I was able to run your xmobarrc with the changes that I posted locally without your scripts. The scripts themselves shouldn't matter as xmobar just complains about them in the status bar itself. There is some inconsistency with spacing when I pasted your code into vim, but it still runs if I don't fix it. Please post your updated config file.
Offline
I was able to run your xmobarrc with the changes that I posted locally without your scripts. The scripts themselves shouldn't matter as xmobar just complains about them in the status bar itself. There is some inconsistency with spacing when I pasted your code into vim, but it still runs if I don't fix it. Please post your updated config file.
Here it is:
Config { font = "-*-Fixed-Bold-R-Normal-*-13-*-*-*-*-*-*-*"
, bgColor = "black"
, fgColor = "grey"
, position = Static{xpos=0, ypos=0, width=1905, height=16}
, lowerOnStart = True
, commands = [ Run Cpu ["-L","3","-H","50","--normal","green","--high","red"] 10
, Run Memory ["-t","<usedratio>%"] 10
, Run Date "%a %b %_d %Y %H:%M:%S" "date" 10"
, Run Com "/home/josealejandro93/scripts/volume.sh" [] "volume" 10
, Run Com "/home/josealejandro93/scripts/bstatus.sh" [] "bstatus" 10
, Run Battery ["-t","<left>%","-L","50","-H","75","-h","green","-n","yell","-l","red"] 10
, Run Com "/home/josealejandro93/scripts/brightness.sh" [] "bright" 10
, Run Com "/home/josealejandro93/scripts/user.sh" [] "user" 500
, Run StdinReader
]
, sepChar = "%"
, alignSep = "}{"
, template = "%StdinReader%}<fc=#ee9a00>%date%</fc>{Vol: <fc=green>%volume%</fc> | [Bat: %battery% | Status: %bstatus%] | Brightness: <fc=green>%bright%</fc> | [%cpu% | Mem: <fc=green>%memory%</fc>] | <fc=#ff0000>%user%</fc> "
}I tried deleting those lines where I call my script but I get the same error about expecting space or Run
Offline
You have an extra " at the end of the Date line after the 10.
Offline
You have an extra " at the end of the Date line after the 10.
Damn I feel so embarassed!!
Fixed it by removing that extra ".
Thanks a lot for your help!
As a side question, is it possible to run python scripts from xmobar?
Maybe calling something like "Run Com "/bin/bash /path/to/script/script.py" [] 0" ??
Once again, thanks a lot!
Offline
You're welcome and I have no idea about your python question. But I'm sure that it would be easy enough to test.
Offline
Thanks a lot, will be marking this as solved!
Offline