You are not logged in.

#1 2013-12-16 07:04:31

cyb3rick
Member
From: Puerto Rico
Registered: 2010-12-14
Posts: 7

Post installation: can't start X server

Hi, there.

My problem is I can't seem to start X. I have an ASUS G46VW with nvidia card. I installed both mesa and nvidia drivers, and ran nvidia-xconfig as suggested in wiki but still get an error message when executing startx. Here's what's logged:

[  1285.882] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1285.882] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 16 02:38:17 2013
[  1285.882] (==) Using config file: "/etc/X11/xorg.conf"
[  1285.882] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1285.883] (==) ServerLayout "Layout0"
[  1285.883] (**) |-->Screen "Screen0" (0)
[  1285.883] (**) |   |-->Monitor "Monitor0"
[  1285.883] (**) |   |-->Device "Device0"
[  1285.883] (**) |-->Input Device "Keyboard0"
[  1285.883] (**) |-->Input Device "Mouse0"
[  1285.883] (==) Automatically adding devices
[  1285.883] (==) Automatically enabling devices
[  1285.883] (==) Automatically adding GPU devices
[  1285.883] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1285.883] 	Entry deleted from font path.
[  1285.883] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1285.883] 	Entry deleted from font path.
[  1285.883] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1285.883] 	Entry deleted from font path.
[  1285.883] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1285.883] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1285.883] 	Entry deleted from font path.
[  1285.883] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1285.883] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[  1285.883] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1285.883] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  1285.883] (WW) Disabling Keyboard0
[  1285.883] (WW) Disabling Mouse0
[  1285.883] (II) Loader magic: 0x7fec20
[  1285.883] (II) Module ABI versions:
[  1285.883] 	X.Org ANSI C Emulation: 0.4
[  1285.883] 	X.Org Video Driver: 14.1
[  1285.883] 	X.Org XInput driver : 19.1
[  1285.883] 	X.Org Server Extension : 7.0
[  1285.883] (II) xfree86: Adding drm device (/dev/dri/card1)
[  1285.883] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1285.885] (--) PCI:*(0:0:2:0) 8086:0166:1043:102d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[  1285.885] (--) PCI: (0:1:0:0) 10de:0fd4:1043:102d rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  1285.885] Initializing built-in extension Generic Event Extension
[  1285.885] Initializing built-in extension SHAPE
[  1285.885] Initializing built-in extension MIT-SHM
[  1285.885] Initializing built-in extension XInputExtension
[  1285.885] Initializing built-in extension XTEST
[  1285.885] Initializing built-in extension BIG-REQUESTS
[  1285.885] Initializing built-in extension SYNC
[  1285.885] Initializing built-in extension XKEYBOARD
[  1285.886] Initializing built-in extension XC-MISC
[  1285.887] Initializing built-in extension SECURITY
[  1285.888] Initializing built-in extension XINERAMA
[  1285.889] Initializing built-in extension XFIXES
[  1285.890] Initializing built-in extension RENDER
[  1285.890] Initializing built-in extension RANDR
[  1285.891] Initializing built-in extension COMPOSITE
[  1285.892] Initializing built-in extension DAMAGE
[  1285.893] Initializing built-in extension MIT-SCREEN-SAVER
[  1285.894] Initializing built-in extension DOUBLE-BUFFER
[  1285.894] Initializing built-in extension RECORD
[  1285.895] Initializing built-in extension DPMS
[  1285.896] Initializing built-in extension X-Resource
[  1285.896] Initializing built-in extension XVideo
[  1285.897] Initializing built-in extension XVideo-MotionCompensation
[  1285.898] Initializing built-in extension XFree86-VidModeExtension
[  1285.898] Initializing built-in extension XFree86-DGA
[  1285.899] Initializing built-in extension XFree86-DRI
[  1285.900] Initializing built-in extension DRI2
[  1285.900] (II) LoadModule: "glx"
[  1285.900] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1285.910] (II) Module glx: vendor="NVIDIA Corporation"
[  1285.910] 	compiled for 4.0.2, module version = 1.0.0
[  1285.910] 	Module class: X.Org Server Extension
[  1285.910] (II) NVIDIA GLX Module  331.20  Wed Oct 30 17:36:48 PDT 2013
[  1285.910] Loading extension GLX
[  1285.911] (II) LoadModule: "nvidia"
[  1285.911] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1285.911] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1285.911] 	compiled for 4.0.2, module version = 1.0.0
[  1285.911] 	Module class: X.Org Video Driver
[  1285.911] (II) NVIDIA dlloader X Driver  331.20  Wed Oct 30 17:16:53 PDT 2013
[  1285.911] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1285.911] (++) using VT number 3

[  1285.911] (EE) No devices detected.
[  1285.911] (EE) 
Fatal server error:
[  1285.911] (EE) no screens found(EE) 
[  1285.911] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  1285.911] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  1285.911] (EE)

Appreciate you taking of your time to help me out.

Offline

#2 2013-12-16 10:35:36

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: Post installation: can't start X server

It looks similar to https://bbs.archlinux.org/viewtopic.php … 7#p1358897
Remove xorg.conf file and reboot.

Offline

#3 2013-12-16 14:03:59

fsckd
Forum Fellow
Registered: 2009-06-15
Posts: 4,173

Re: Post installation: can't start X server

Moving from Installation to Applications & Desktop Environments.


aur S & M :: forum rules :: Community Ethos
Resources for Women, POC, LGBT*, and allies

Offline

#4 2013-12-16 19:17:50

cyb3rick
Member
From: Puerto Rico
Registered: 2010-12-14
Posts: 7

Re: Post installation: can't start X server

@karol : That didn't do it for me; still seeing the same errors.

Here's the output of several commands I think might be helpful.

First, I verified system recognizes my graphic card and corroborated its model.

# lspci -k | grep -A 2 -i "VGA"
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GTX 660M] (rev a1)

According to the wiki:

"For GeForce 8 series and newer [NVC0 and newer] cards, install nvidia package, available in the official repositories."

So I installed nvidia package from official repo.

It is possible that after installing the driver it may not be needed to create an Xorg server configuration file.

But it didn't run, so I ran nvidia-xconfig as suggested:

#nvidia-xconfig
New X configuration file written to '/etc/X11/xorg.conf'

However, I noticed something strange when trying to list GPU devices:

#nvidia-debugdump --list
Error: nvmlInit(): Driver Not Loaded

Also:

#nvidia-xconfig --query-gpu-info
ERROR: Unable to query GPU information

And:

#nvidia-smi
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

Any ideas or pointers are really appreciated as I'm growing really frustrated over this.

Thanks a bunch in advance.


--Edit--

I should also add, that I don't have a "10-nvidia.conf" file under /etc/X11/xorg.conf.d/ which I thought was automatically generated by nvidia-xconfig along with xorg.conf file.

Last edited by cyb3rick (2013-12-16 19:25:51)

Offline

#5 2013-12-16 19:28:29

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: Post installation: can't start X server

What's the output of 'lsmod'?

In the first post you said

cyb3rick wrote:

My problem is I can't seem to start X. I have an ASUS G46VW with nvidia card.

which is not exactly true, as you have an Intel graphics card too.

Offline

#6 2013-12-16 19:42:32

cyb3rick
Member
From: Puerto Rico
Registered: 2010-12-14
Posts: 7

Re: Post installation: can't start X server

karol wrote:

What's the output of 'lsmod'?

In the first post you said

cyb3rick wrote:

My problem is I can't seem to start X. I have an ASUS G46VW with nvidia card.

which is not exactly true, as you have an Intel graphics card too.

Oh, my apologies for that. Here is lsmod's output: http://pastebin.com/gnW8qEFt

Offline

Board footer

Powered by FluxBB