You are not logged in.

#1 2013-12-29 05:26:02

Slabity
Member
Registered: 2013-12-29
Posts: 40

Unable to start gnome-session or gdm

Sorry for the vague title. I don't really have any specifics to go on for this problem.

When I try to start a gnome-session through startx, I get a screen that says, "Oh no! Something has gone wrong", with no error outputs in xsession-errors.

First off is some system info. I'm running a Thinkpad T540p:

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d4)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK208M [GeForce GT 730M] (rev a1)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83)

Here is my xorg.conf file:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 331.20  (buildmeister@swio-display-x86-rhel47-05)  Wed Oct 30 18:20:53 PDT 2013


Section "ServerLayout"
    Identifier     "layout"
    Screen      0  "nvidia"
    Inactive       "intel"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Device"
    Identifier     "nvidia"
    Driver         "nvidia"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "intel"
    Driver         "modesetting"
    BusID          "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier     "nvidia"
    Device         "nvidia"
    Option         "AllowEmptyInitialConfiguration"
EndSection

Section "Screen"
    Identifier     "intel"
    Device         "intel"
EndSection

Here is my .xinitrc file:

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --setprovideroutputsource 0x46 0x2b4
xrandr --output LVDS-0 --off
xrandr --auto
exec gnome-session

And the Xorg.0.log file:

[  2483.841] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[  2483.844] X Protocol Version 11, Revision 0
[  2483.845] Build Operating System: Linux 3.12.5-1-ARCH x86_64 
[  2483.846] Current Operating System: Linux slabity-laptop 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[  2483.846] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=acc69edd-1cf4-4c10-80de-e8a50d304800 rw quiet
[  2483.848] Build Date: 13 December 2013  03:11:42PM
[  2483.849]  
[  2483.850] Current version of pixman: 0.32.4
[  2483.852] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2483.852] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2483.856] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 28 19:04:26 2013
[  2483.857] (==) Using config file: "/etc/X11/xorg.conf"
[  2483.858] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2483.858] (==) ServerLayout "layout"
[  2483.858] (**) |-->Screen "nvidia" (0)
[  2483.858] (**) |   |-->Monitor "<default monitor>"
[  2483.858] (**) |   |-->Device "nvidia"
[  2483.858] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[  2483.858] (**) |-->Inactive Device "intel"
[  2483.858] (**) |-->Input Device "Keyboard0"
[  2483.858] (**) |-->Input Device "Mouse0"
[  2483.858] (==) Automatically adding devices
[  2483.858] (==) Automatically enabling devices
[  2483.858] (==) Automatically adding GPU devices
[  2483.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  2483.858] 	Entry deleted from font path.
[  2483.858] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  2483.858] 	Entry deleted from font path.
[  2483.858] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  2483.858] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  2483.858] 	Entry deleted from font path.
[  2483.858] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  2483.858] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[  2483.858] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2483.858] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  2483.858] (WW) Disabling Keyboard0
[  2483.858] (WW) Disabling Mouse0
[  2483.858] (II) Loader magic: 0x7fec20
[  2483.858] (II) Module ABI versions:
[  2483.858] 	X.Org ANSI C Emulation: 0.4
[  2483.858] 	X.Org Video Driver: 14.1
[  2483.858] 	X.Org XInput driver : 19.1
[  2483.858] 	X.Org Server Extension : 7.0
[  2483.858] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2483.858] (II) xfree86: Adding drm device (/dev/dri/card1)
[  2483.860] (--) PCI:*(0:0:2:0) 8086:0416:17aa:2211 rev 6, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[  2483.860] (--) PCI: (0:1:0:0) 10de:1290:17aa:2211 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128
[  2483.861] Initializing built-in extension Generic Event Extension
[  2483.862] Initializing built-in extension SHAPE
[  2483.863] Initializing built-in extension MIT-SHM
[  2483.864] Initializing built-in extension XInputExtension
[  2483.865] Initializing built-in extension XTEST
[  2483.866] Initializing built-in extension BIG-REQUESTS
[  2483.867] Initializing built-in extension SYNC
[  2483.867] Initializing built-in extension XKEYBOARD
[  2483.868] Initializing built-in extension XC-MISC
[  2483.869] Initializing built-in extension SECURITY
[  2483.870] Initializing built-in extension XINERAMA
[  2483.871] Initializing built-in extension XFIXES
[  2483.872] Initializing built-in extension RENDER
[  2483.873] Initializing built-in extension RANDR
[  2483.874] Initializing built-in extension COMPOSITE
[  2483.874] Initializing built-in extension DAMAGE
[  2483.875] Initializing built-in extension MIT-SCREEN-SAVER
[  2483.876] Initializing built-in extension DOUBLE-BUFFER
[  2483.877] Initializing built-in extension RECORD
[  2483.878] Initializing built-in extension DPMS
[  2483.879] Initializing built-in extension X-Resource
[  2483.879] Initializing built-in extension XVideo
[  2483.880] Initializing built-in extension XVideo-MotionCompensation
[  2483.881] Initializing built-in extension XFree86-VidModeExtension
[  2483.882] Initializing built-in extension XFree86-DGA
[  2483.883] Initializing built-in extension XFree86-DRI
[  2483.884] Initializing built-in extension DRI2
[  2483.884] (II) LoadModule: "glx"
[  2483.884] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2483.892] (II) Module glx: vendor="NVIDIA Corporation"
[  2483.892] 	compiled for 4.0.2, module version = 1.0.0
[  2483.892] 	Module class: X.Org Server Extension
[  2483.892] (II) NVIDIA GLX Module  331.20  Wed Oct 30 17:36:48 PDT 2013
[  2483.892] Loading extension GLX
[  2483.892] (II) LoadModule: "nvidia"
[  2483.892] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  2483.893] (II) Module nvidia: vendor="NVIDIA Corporation"
[  2483.893] 	compiled for 4.0.2, module version = 1.0.0
[  2483.893] 	Module class: X.Org Video Driver
[  2483.893] (II) LoadModule: "modesetting"
[  2483.893] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  2483.893] (II) Module modesetting: vendor="X.Org Foundation"
[  2483.893] 	compiled for 1.14.4, module version = 0.8.1
[  2483.893] 	Module class: X.Org Video Driver
[  2483.893] 	ABI class: X.Org Video Driver, version 14.1
[  2483.893] (II) NVIDIA dlloader X Driver  331.20  Wed Oct 30 17:16:53 PDT 2013
[  2483.893] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  2483.893] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2483.893] (++) using VT number 1

[  2483.893] (II) Loading sub module "fb"
[  2483.893] (II) LoadModule: "fb"
[  2483.893] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2483.893] (II) Module fb: vendor="X.Org Foundation"
[  2483.893] 	compiled for 1.14.5, module version = 1.0.0
[  2483.893] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2483.893] (WW) Unresolved symbol: fbGetGCPrivateKey
[  2483.893] (II) Loading sub module "wfb"
[  2483.893] (II) LoadModule: "wfb"
[  2483.893] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  2483.893] (II) Module wfb: vendor="X.Org Foundation"
[  2483.893] 	compiled for 1.14.5, module version = 1.0.0
[  2483.893] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2483.893] (II) Loading sub module "ramdac"
[  2483.893] (II) LoadModule: "ramdac"
[  2483.893] (II) Module "ramdac" already built-in
[  2483.893] (II) modesetting(1): using drv /dev/dri/card1
[  2483.893] (II) modesetting(G0): using drv /dev/dri/card1
[  2483.893] (EE) Screen 1 deleted because of no matching config section.
[  2483.893] (II) UnloadModule: "modesetting"
[  2483.894] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"nvidia" for depth/fbbpp 24/32
[  2483.894] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  2483.894] (==) NVIDIA(0): RGB weight 888
[  2483.894] (==) NVIDIA(0): Default visual is TrueColor
[  2483.894] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  2483.894] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[  2483.894] (**) NVIDIA(0): Enabling 2D acceleration
[  2484.064] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[  2484.065] (II) NVIDIA(0): NVIDIA GPU GeForce GT 730M (GK208) at PCI:1:0:0 (GPU-0)
[  2484.065] (--) NVIDIA(0): Memory: 1048576 kBytes
[  2484.065] (--) NVIDIA(0): VideoBIOS: 80.28.2a.00.30
[  2484.065] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[  2484.065] (--) NVIDIA(0): Valid display device(s) on GeForce GT 730M at PCI:1:0:0
[  2484.065] (--) NVIDIA(0):     none
[  2484.065] (II) NVIDIA(0): Validated MetaModes:
[  2484.065] (II) NVIDIA(0):     "NULL"
[  2484.065] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[  2484.065] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[  2484.065] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[  2484.065] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[  2484.065] (==) modesetting(G0): RGB weight 888
[  2484.065] (==) modesetting(G0): Default visual is TrueColor
[  2484.065] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[  2484.065] (II) modesetting(G0): Output eDP-1-0 has no monitor section
[  2484.067] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[  2484.067] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[  2484.093] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[  2484.093] (II) modesetting(G0): Output DisplayPort-1-1 has no monitor section
[  2484.093] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
[  2484.093] (II) modesetting(G0): EDID for output eDP-1-0
[  2484.093] (II) modesetting(G0): Manufacturer: MEI  Model: 96a2  Serial#: 0
[  2484.093] (II) modesetting(G0): Year: 2013  Week: 255
[  2484.093] (II) modesetting(G0): EDID Version: 1.4
[  2484.093] (II) modesetting(G0): Digital Display Input
[  2484.093] (II) modesetting(G0): 8 bits per channel
[  2484.093] (II) modesetting(G0): Digital interface is DisplayPort
[  2484.093] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[  2484.093] (II) modesetting(G0): Gamma: 2.20
[  2484.093] (II) modesetting(G0): No DPMS capabilities specified
[  2484.093] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 
[  2484.093] (II) modesetting(G0): First detailed timing is preferred mode
[  2484.093] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
[  2484.093] (II) modesetting(G0): redX: 0.652 redY: 0.329   greenX: 0.324 greenY: 0.600
[  2484.093] (II) modesetting(G0): blueX: 0.150 blueY: 0.045   whiteX: 0.312 whiteY: 0.329
[  2484.093] (II) modesetting(G0): Manufacturer's mask: 0
[  2484.093] (II) modesetting(G0): Supported detailed timing:
[  2484.093] (II) modesetting(G0): clock: 302.5 MHz   Image Size:  344 x 193 mm
[  2484.093] (II) modesetting(G0): h_active: 2880  h_sync: 2924  h_sync_end 2928 h_blank_end 3076 h_border: 0
[  2484.093] (II) modesetting(G0): v_active: 1620  v_sync: 1629  v_sync_end 1630 v_blanking: 1640 v_border: 0
[  2484.093] (II) modesetting(G0): Supported detailed timing:
[  2484.093] (II) modesetting(G0): clock: 302.5 MHz   Image Size:  344 x 193 mm
[  2484.093] (II) modesetting(G0): h_active: 2880  h_sync: 2924  h_sync_end 2928 h_blank_end 3076 h_border: 0
[  2484.093] (II) modesetting(G0): v_active: 1620  v_sync: 1629  v_sync_end 1630 v_blanking: 1967 v_border: 0
[  2484.093] (II) modesetting(G0): Ranges: V min: 49 V max: 61 Hz, H min: 96 H max: 100 kHz, PixClock max 305 MHz
[  2484.093] (II) modesetting(G0):  VVX16T028J00
[  2484.093] (II) modesetting(G0): EDID (in hex):
[  2484.093] (II) modesetting(G0): 	00ffffffffffff0034a9a29600000000
[  2484.093] (II) modesetting(G0): 	ff170104a52213780212a1a754539926
[  2484.093] (II) modesetting(G0): 	0b505400000001010101010101010101
[  2484.093] (II) modesetting(G0): 	0101010101012a7640c4b05414602c04
[  2484.093] (II) modesetting(G0): 	910058c11000001e2a7640c4b0545b61
[  2484.093] (II) modesetting(G0): 	2c04910058c11000001e000000fd0031
[  2484.093] (II) modesetting(G0): 	3d60641e010a202020202020000000fe
[  2484.093] (II) modesetting(G0): 	005656583136543032384a30300a0050
[  2484.093] (II) modesetting(G0): Printing probed modes for output eDP-1-0
[  2484.093] (II) modesetting(G0): Modeline "2880x1620"x60.0  302.50  2880 2924 2928 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[  2484.093] (II) modesetting(G0): Modeline "2880x1620"x50.0  302.50  2880 2924 2928 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[  2484.093] (II) modesetting(G0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[  2484.093] (II) modesetting(G0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[  2484.093] (II) modesetting(G0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[  2484.093] (II) modesetting(G0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[  2484.093] (II) modesetting(G0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  2484.094] (II) modesetting(G0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  2484.095] (II) modesetting(G0): EDID for output VGA-1-0
[  2484.095] (II) modesetting(G0): EDID for output DisplayPort-1-0
[  2484.119] (II) modesetting(G0): EDID for output HDMI-1-0
[  2484.119] (II) modesetting(G0): EDID for output DisplayPort-1-1
[  2484.120] (II) modesetting(G0): EDID for output HDMI-1-1
[  2484.120] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  2484.120] (==) modesetting(G0): DPI set to (96, 96)
[  2484.120] (II) Loading sub module "fb"
[  2484.120] (II) LoadModule: "fb"
[  2484.120] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2484.120] (II) Module fb: vendor="X.Org Foundation"
[  2484.120] 	compiled for 1.14.5, module version = 1.0.0
[  2484.120] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2484.120] (II) Loading sub module "shadow"
[  2484.120] (II) LoadModule: "shadow"
[  2484.120] (II) Loading /usr/lib/xorg/modules/libshadow.so
[  2484.120] (II) Module shadow: vendor="X.Org Foundation"
[  2484.120] 	compiled for 1.14.5, module version = 1.1.0
[  2484.120] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2484.120] (--) Depth 24 pixmap format is 32 bpp
[  2484.120] (==) modesetting(G0): Backing store disabled
[  2484.120] (==) modesetting(G0): Silken mouse enabled
[  2484.120] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2484.121] (==) modesetting(G0): DPMS enabled
[  2484.121] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
[  2485.183] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[  2485.183] (II) NVIDIA:     access.
[  2485.187] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  2485.187] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  2485.187] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  2485.187] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  2485.187] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  2485.187] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  2485.187] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  2485.187] (II) NVIDIA(0):     Config Options in the README.
[  2485.187] (II) NVIDIA(0): Setting mode "NULL"
[  2485.187] (EE) NVIDIA(0): Failed to initiate mode change.
[  2485.187] (EE) NVIDIA(0): Failed to complete mode change
[  2485.196] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[  2485.196] Loading extension NV-GLX
[  2485.201] (==) NVIDIA(0): Disabling shared memory pixmaps
[  2485.201] (==) NVIDIA(0): Backing store disabled
[  2485.201] (==) NVIDIA(0): Silken mouse enabled
[  2485.201] (==) NVIDIA(0): DPMS enabled
[  2485.201] Loading extension NV-CONTROL
[  2485.201] (II) Loading sub module "dri2"
[  2485.201] (II) LoadModule: "dri2"
[  2485.201] (II) Module "dri2" already built-in
[  2485.201] (II) NVIDIA(0): [DRI2] Setup complete
[  2485.201] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  2485.201] (--) RandR disabled
[  2485.204] (II) Initializing extension GLX
[  2485.205] (II) modesetting(G0): Damage tracking initialized
[  2485.227] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  2485.227] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2485.227] (II) LoadModule: "evdev"
[  2485.227] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2485.227] (II) Module evdev: vendor="X.Org Foundation"
[  2485.227] 	compiled for 1.14.3, module version = 2.8.2
[  2485.227] 	Module class: X.Org XInput Driver
[  2485.228] 	ABI class: X.Org XInput driver, version 19.1
[  2485.228] (II) Using input driver 'evdev' for 'Power Button'
[  2485.228] (**) Power Button: always reports core events
[  2485.228] (**) evdev: Power Button: Device: "/dev/input/event2"
[  2485.228] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2485.228] (--) evdev: Power Button: Found keys
[  2485.228] (II) evdev: Power Button: Configuring as keyboard
[  2485.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[  2485.228] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2485.228] (**) Option "xkb_rules" "evdev"
[  2485.228] (**) Option "xkb_model" "pc104"
[  2485.228] (**) Option "xkb_layout" "us"
[  2485.240] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[  2485.240] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2485.240] (II) Using input driver 'evdev' for 'Video Bus'
[  2485.240] (**) Video Bus: always reports core events
[  2485.240] (**) evdev: Video Bus: Device: "/dev/input/event10"
[  2485.240] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  2485.240] (--) evdev: Video Bus: Found keys
[  2485.240] (II) evdev: Video Bus: Configuring as keyboard
[  2485.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10"
[  2485.240] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  2485.240] (**) Option "xkb_rules" "evdev"
[  2485.240] (**) Option "xkb_model" "pc104"
[  2485.241] (**) Option "xkb_layout" "us"
[  2485.241] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[  2485.241] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2485.241] (II) Using input driver 'evdev' for 'Video Bus'
[  2485.241] (**) Video Bus: always reports core events
[  2485.241] (**) evdev: Video Bus: Device: "/dev/input/event11"
[  2485.241] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  2485.241] (--) evdev: Video Bus: Found keys
[  2485.241] (II) evdev: Video Bus: Configuring as keyboard
[  2485.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input13/event11"
[  2485.241] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  2485.241] (**) Option "xkb_rules" "evdev"
[  2485.241] (**) Option "xkb_model" "pc104"
[  2485.241] (**) Option "xkb_layout" "us"
[  2485.241] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  2485.241] (II) No input driver specified, ignoring this device.
[  2485.241] (II) This device may have been added with another device file.
[  2485.241] (II) config/udev: Adding drm device (/dev/dri/card0)
[  2485.241] (II) config/udev: Adding drm device (/dev/dri/card1)
[  2485.241] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event14)
[  2485.241] (II) No input driver specified, ignoring this device.
[  2485.241] (II) This device may have been added with another device file.
[  2485.241] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event13)
[  2485.241] (II) No input driver specified, ignoring this device.
[  2485.241] (II) This device may have been added with another device file.
[  2485.241] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event12)
[  2485.241] (II) No input driver specified, ignoring this device.
[  2485.241] (II) This device may have been added with another device file.
[  2485.242] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[  2485.242] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[  2485.242] (II) Using input driver 'evdev' for 'Integrated Camera'
[  2485.242] (**) Integrated Camera: always reports core events
[  2485.242] (**) evdev: Integrated Camera: Device: "/dev/input/event8"
[  2485.242] (--) evdev: Integrated Camera: Vendor 0x4ca Product 0x7035
[  2485.242] (--) evdev: Integrated Camera: Found keys
[  2485.242] (II) evdev: Integrated Camera: Configuring as keyboard
[  2485.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input10/event8"
[  2485.242] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[  2485.242] (**) Option "xkb_rules" "evdev"
[  2485.242] (**) Option "xkb_model" "pc104"
[  2485.242] (**) Option "xkb_layout" "us"
[  2485.242] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[  2485.242] (II) No input driver specified, ignoring this device.
[  2485.242] (II) This device may have been added with another device file.
[  2485.242] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[  2485.242] (II) No input driver specified, ignoring this device.
[  2485.242] (II) This device may have been added with another device file.
[  2485.242] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[  2485.242] (II) No input driver specified, ignoring this device.
[  2485.242] (II) This device may have been added with another device file.
[  2485.242] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  2485.242] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2485.242] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  2485.242] (**) AT Translated Set 2 keyboard: always reports core events
[  2485.242] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  2485.242] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  2485.242] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  2485.242] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  2485.242] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  2485.242] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[  2485.242] (**) Option "xkb_rules" "evdev"
[  2485.242] (**) Option "xkb_model" "pc104"
[  2485.242] (**) Option "xkb_layout" "us"
[  2485.242] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[  2485.242] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  2485.242] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  2485.242] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  2485.242] (II) LoadModule: "synaptics"
[  2485.242] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  2485.242] (II) Module synaptics: vendor="X.Org Foundation"
[  2485.242] 	compiled for 1.14.4, module version = 1.7.2
[  2485.242] 	Module class: X.Org XInput Driver
[  2485.242] 	ABI class: X.Org XInput driver, version 19.1
[  2485.242] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  2485.242] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  2485.242] (**) Option "Device" "/dev/input/event9"
[  2485.356] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[  2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5112 (res 42)
[  2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 3834 (res 42)
[  2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[  2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  2485.356] (**) Option "TapButton1" "1"
[  2485.356] (**) Option "TapButton2" "2"
[  2485.356] (**) Option "TapButton3" "3"
[  2485.356] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[  2485.356] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2485.356] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  2485.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event9"
[  2485.383] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[  2485.383] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  2485.383] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[  2485.383] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.046
[  2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  2485.383] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  2485.383] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2485.383] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  2485.383] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  2485.383] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[  2485.383] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[  2485.383] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[  2485.383] (**) TPPS/2 IBM TrackPoint: always reports core events
[  2485.383] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[  2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[  2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[  2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[  2485.383] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[  2485.383] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[  2485.383] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[  2485.383] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2485.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input11/event15"
[  2485.383] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[  2485.383] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[  2485.384] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[  2485.384] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[  2485.384] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[  2485.384] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[  2485.384] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[  2485.384] (II) No input driver specified, ignoring this device.
[  2485.384] (II) This device may have been added with another device file.
[  2485.384] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[  2485.384] (II) No input driver specified, ignoring this device.
[  2485.384] (II) This device may have been added with another device file.
[  2485.384] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event3)
[  2485.384] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[  2485.384] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[  2485.384] (**) ThinkPad Extra Buttons: always reports core events
[  2485.384] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event3"
[  2485.384] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[  2485.384] (--) evdev: ThinkPad Extra Buttons: Found keys
[  2485.384] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[  2485.384] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input4/event3"
[  2485.384] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[  2485.384] (**) Option "xkb_rules" "evdev"
[  2485.384] (**) Option "xkb_model" "pc104"
[  2485.384] (**) Option "xkb_layout" "us"
[  2485.391] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[  2485.391] (II) modesetting(G0): Using EDID range info for horizontal sync
[  2485.391] (II) modesetting(G0): Using EDID range info for vertical refresh
[  2485.391] (II) modesetting(G0): Printing DDC gathered Modelines:
[  2485.391] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[  2485.391] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[  2485.420] reporting 3 6 26 203
[  2485.421] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[  2485.421] (II) modesetting(G0): Using hsync ranges from config file
[  2485.421] (II) modesetting(G0): Using vrefresh ranges from config file
[  2485.421] (II) modesetting(G0): Printing DDC gathered Modelines:
[  2485.421] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[  2485.421] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[  2485.450] reporting 3 6 26 203
[  2485.467] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[  2485.467] (II) modesetting(G0): Using hsync ranges from config file
[  2485.467] (II) modesetting(G0): Using vrefresh ranges from config file
[  2485.467] (II) modesetting(G0): Printing DDC gathered Modelines:
[  2485.467] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[  2485.467] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[  2485.493] reporting 3 6 26 203
[  2485.510] have a master to look out for
[  2485.510] adjust shatters 0 2880
[  2485.515] need to create shared pixmap 1reporting 3 6 26 203
[  2486.236] reporting 3 6 26 203
[  2486.345] reporting 3 6 26 203
[  2486.373] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[  2486.373] (II) modesetting(G0): Using hsync ranges from config file
[  2486.373] (II) modesetting(G0): Using vrefresh ranges from config file
[  2486.373] (II) modesetting(G0): Printing DDC gathered Modelines:
[  2486.373] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[  2486.373] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[  2486.400] reporting 3 6 26 203
[  2486.463] reporting 3 6 26 203
[  2486.483] reporting 3 6 26 203
[  2486.605] reporting 3 6 26 203
[  2486.636] (II) modesetting(G0): EDID vendor "MEI", prod id 38562
[  2486.636] (II) modesetting(G0): Using hsync ranges from config file
[  2486.636] (II) modesetting(G0): Using vrefresh ranges from config file
[  2486.636] (II) modesetting(G0): Printing DDC gathered Modelines:
[  2486.636] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[  2486.636] (II) modesetting(G0): Modeline "2880x1620"x0.0  302.50  2880 2924 2928 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[  2486.663] reporting 3 6 26 203
[  2486.724] reporting 3 6 26 203
[  2486.840] reporting 3 6 26 203
[  2486.844] reporting 3 6 26 203
[  2486.868] reporting 3 6 26 203
[  2493.841] (II) evdev: ThinkPad Extra Buttons: Close
[  2493.841] (II) UnloadModule: "evdev"
[  2493.841] (II) evdev: TPPS/2 IBM TrackPoint: Close
[  2493.841] (II) UnloadModule: "evdev"
[  2493.841] (II) UnloadModule: "synaptics"
[  2493.841] (II) evdev: AT Translated Set 2 keyboard: Close
[  2493.841] (II) UnloadModule: "evdev"
[  2493.841] (II) evdev: Integrated Camera: Close
[  2493.841] (II) UnloadModule: "evdev"
[  2493.841] (II) evdev: Video Bus: Close
[  2493.841] (II) UnloadModule: "evdev"
[  2493.841] (II) evdev: Video Bus: Close
[  2493.841] (II) UnloadModule: "evdev"
[  2493.841] (II) evdev: Power Button: Close
[  2493.841] (II) UnloadModule: "evdev"
[  2493.863] (II) NVIDIA(GPU-0): Deleting GPU-0
[  2494.409] (EE) Server terminated successfully (0). Closing log file.

I'm pretty lost now. I finally managed to get X working on my Nvidia/Intel combination with twm, but it refuses to work with gnome-session.

Any ideas?

Offline

Board footer

Powered by FluxBB