You are not logged in.

#76 2005-12-21 10:32:39

fdac
Member
From: Brisbane, Australia
Registered: 2005-06-19
Posts: 96

Re: INITRD - share your woes

Hi,

Yet another user with a broken system after kernel and mkinitrd upgrade.

The system drops into the busybox shell no matter what I do.  I first tried initrd26.img using mkintrd auto, then initrd26-full.img using mkinitrd full.

Either way I am dropped into the busybox shell with

/bin/sh: can't access tty; job control turned off

When there, using the full initrd, cat /proc/partitions is correct and shows my partitions sda1 ... sda9.  sda6 is the Arch root partition.  The hdd is sata, running on an nForce 4 chipset.  I think sata_nv is the correct module.

Anyway, using the full initrd, cat /proc/modules lists hundreds of modules so not loading a module doesn't appear to be the problem.

But I still can't get anywhere past this shell.  Any suggestions as to how I might fix it?

Thanks
Francis

Offline

#77 2005-12-21 10:35:48

goldfrapper
Member
From: Belgium
Registered: 2005-03-18
Posts: 8

Re: INITRD - share your woes

Yesterday I have pacman -Syu and thus installed the new 'initrd kernel'. When booting just few hours ago system halts when trying to uncompress the kernel.
It says:

invalid compressed  format (err=2).

I don't now wetter  this has anything todo with initrd but I never had this problem before.

Some people say this could  have to do with corrupt packages (but pacman verifies after downloading - doesn't it?).

Can anybody help me with this?

PS: before anybody asks: yes I've put the initrd line in my lilo conf and ran lilo afterwards. (initrd line points to initrd26.img not the full one.) I use the stock kernel.

Offline

#78 2005-12-21 10:48:09

fdac
Member
From: Brisbane, Australia
Registered: 2005-06-19
Posts: 96

Re: INITRD - share your woes

Ok, more info.  I used the 0.7 boot CD and chrooted into my Arch system.  I tried enabling everything in an attempt to get it to work and then mkinitrd'd again.

When doing a mkinitrd auto I get on the screen

/sys/devices is not present -- mount /sys first

3 timesbefore it creates the initrd.

When doing mkinitrd full no such error, but the system still refuses to boot. 

I've wasted about 3 evenings so far working on this - have read through this entire forum thread and the wiki pages and nothing has worked.  I really hope it's something simple I've just missed...

Cheers
Francis

Offline

#79 2005-12-21 11:00:32

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: INITRD - share your woes

come on irc i'll try to help you

Offline

#80 2005-12-21 11:49:21

fdac
Member
From: Brisbane, Australia
Registered: 2005-06-19
Posts: 96

Re: INITRD - share your woes

Thanks to a quick chat with tpowa my problem is solved.

As usual, the error was obvious with a bit of insight:

My GRUB menu.lst entry for Arch was incorrect.. my system has one SATA hard drive and no IDE.

The correct kernel line for Arch on my system is

 kernel /boot/vmlinuz26 root=/dev/sda6

I incorrectly had /dev/hda6 in there. 

I think this must be because I simply copied the new parts of menu.lst.pacnew into my menu.lst and checked all the numbers etc. but not the letter! 

So - completely my fault, not Arch's.  A massive thank you to tpowa for his assistance.

Cheers
Francis

Offline

#81 2006-01-03 14:19:28

kozaki
Member
From: London >. < Paris
Registered: 2005-06-13
Posts: 671
Website

Re: INITRD - share your woes

fdac wrote:

Thanks to a quick chat with tpowa my problem is solved.

As usual, the error was obvious with a bit of insight:

My GRUB menu.lst entry for Arch was incorrect.. my system has one SATA hard drive and no IDE.

The correct kernel line for Arch on my system is

 kernel /boot/vmlinuz26 root=/dev/sda6

I incorrectly had /dev/hda6 in there.

Well that's surprising me,
main system has a single Hitachi SATAII HDD and since it upgraded to kernel >=2.6.14 it always booted fine with

title  Arch Linux 2.6.15 [/boot/vmlinuz26]
root   (hd0,5)
kernel /boot/vmlinuz26 root=/dev/hda6 ro devfs=nomount vga=792
initrd /boot/initrd26.img

Well I just upgraded to 2.6.15 and will reboot just to be sure.

[EDIT:ON]
yeap! had to edit /boot/grub/menu.lst from
kernel /boot/vmlinuz26 root=/dev/hda6
to
kernel /boot/vmlinuz26 root=/dev/sda6
[EDIT:OFF]


Also have a question about hwdetect.
On 2 of my machines, hwdetect do not print anything. I tried with:
hwdetect --show-modules, ~ --show-all, ~ --show-all, ~ --sata (etc.) both as user and root.
Which makes me unsure on what module to put into /etc/mkinitrd.conf on my old gateway, that i just updated from kernel 2.6.13 to 2.6.15.
This box has no screen/keyboard, it's administred by ssh only. So a single error on initrd configuration will be be uneasilly corrected.


Seeded last month: Arch 50 gig, derivatives 1 gig
Desktop @3.3GHz 8 gig RAM, linux-ck
laptop #1 Atom 2 gig RAM, Arch linux stock i686 (6H w/ 6yrs old battery smile) #2: ARM Tegra K1, 4 gig RAM, ChrOS
Atom Z520 2 gig RAM, OMV (Debian 7) kernel 3.16 bpo on SDHC | PGP Key: 0xFF0157D9

Offline

#82 2006-01-09 01:42:46

rdoggsv
Member
From: /home
Registered: 2005-06-24
Posts: 79
Website

Re: INITRD - share your woes

i just installed a fresh arch 0.7.1 , then did the initrd custom config as it says on the wiki , and my system is working flawlesly big_smile as usual on arch.

I cant belive my machine boots up to the KDM on 20 seconds !!  tongue

Offline

#83 2006-01-11 22:18:37

syg00
Member
Registered: 2006-01-11
Posts: 31

Re: INITRD - share your woes

Folks I may have been asleep at the wheel here, but I just rolled up my Arch, and happened to see the initrd message scroll by.

Mmmm - wonder what that was about, so I checked pacman.log. Nothing of interest. Are these messages saved elsewhere  ???
Whilst a new menu.lst  is saved, it might be nice to be able to get all the messages, even if stored elsewhere, aka Gentoo with portage.log and LOG_PORTDIR.
Is of concern to me as I use this Arch system as kernel patch testing, so it has a lot of kernels, and I chainload in from another (stable) system.
And (obviously) I'm not up-to-date on the announcements.

Offline

#84 2006-01-14 10:57:01

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 11,868

Re: INITRD - share your woes

This is usually caused because a module needed to access your hd or fs is not loaded by initrd.

try this for grub

initrd /boot/initrd26-full.img

and this for lilo

initrd=/boot/initrd26-full.img

This will boot with all available modules loaded. If it works, you can then try to figure out which modules are needed to boot your system.

Check the wiki-entry for initrd for details.


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.


(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Offline

#85 2006-01-18 00:11:10

yak8998
Member
Registered: 2004-03-01
Posts: 143

Re: INITRD - share your woes

i keep getting the

ERROR: All of your loopback devices are in use!

I'm just finally moving ahead to udev and initrd, and its a nightmare. I have the /dev/zero node, whats the problem here? i'm lost, ive been screwing with this all day. i've swapped all manner of kernels and uninstalled and installed every combination i can imagine. HELP


"Ignorance is bliss, for stupid people."
"open-source is [...] programming Darwinism."
Vaughan-Nichols

Offline

#86 2006-01-18 07:45:07

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: INITRD - share your woes

try using root user, normal users cannot build initrd

Offline

#87 2006-01-18 18:59:17

yak8998
Member
Registered: 2004-03-01
Posts: 143

Re: INITRD - share your woes

i am logged in as root


"Ignorance is bliss, for stupid people."
"open-source is [...] programming Darwinism."
Vaughan-Nichols

Offline

#88 2006-01-19 16:57:44

juergen
Developer
From: Frankfurt/Germany
Registered: 2005-04-11
Posts: 48
Website

Re: INITRD - share your woes

Support for loopback block devices is  available?

bash-3.00$ grep  loop /proc/devices 
  7 loop

Also check your device files:

bash-3.00$ ls -l /dev/loop
total 0
brw-rw----  1 root disk 7, 0 2006-01-19 18:46 0
brw-rw----  1 root disk 7, 1 2006-01-19 18:46 1
brw-rw----  1 root disk 7, 2 2006-01-19 18:46 2
brw-rw----  1 root disk 7, 3 2006-01-19 18:46 3
brw-rw----  1 root disk 7, 4 2006-01-19 18:46 4
brw-rw----  1 root disk 7, 5 2006-01-19 18:46 5
brw-rw----  1 root disk 7, 6 2006-01-19 18:46 6
brw-rw----  1 root disk 7, 7 2006-01-19 18:46 7

Offline

#89 2006-01-19 20:52:13

yak8998
Member
Registered: 2004-03-01
Posts: 143

Re: INITRD - share your woes

juergen wrote:

Support for loopback block devices is  available?

bash-3.00$ grep  loop /proc/devices 
  7 loop

Also check your device files:

bash-3.00$ ls -l /dev/loop
total 0
brw-rw----  1 root disk 7, 0 2006-01-19 18:46 0
brw-rw----  1 root disk 7, 1 2006-01-19 18:46 1
brw-rw----  1 root disk 7, 2 2006-01-19 18:46 2
brw-rw----  1 root disk 7, 3 2006-01-19 18:46 3
brw-rw----  1 root disk 7, 4 2006-01-19 18:46 4
brw-rw----  1 root disk 7, 5 2006-01-19 18:46 5
brw-rw----  1 root disk 7, 6 2006-01-19 18:46 6
brw-rw----  1 root disk 7, 7 2006-01-19 18:46 7

its all there, still no dice


"Ignorance is bliss, for stupid people."
"open-source is [...] programming Darwinism."
Vaughan-Nichols

Offline

#90 2006-01-19 21:22:58

juergen
Developer
From: Frankfurt/Germany
Registered: 2005-04-11
Posts: 48
Website

Re: INITRD - share your woes

Hmm... Unfortunately losetup's stderr gets lost in /dev/null in mkinitrd, so try to setup a loopback device manually:

# touch /tmp/test.img
# losetup /dev/loop/0 /tmp/test.img 

Jürgen

Offline

#91 2006-01-19 21:41:07

yak8998
Member
Registered: 2004-03-01
Posts: 143

Re: INITRD - share your woes

[root@thebeast linux-2.6.3]# touch /tmp/test.img 
[root@thebeast linux-2.6.3]# losetup /dev/loop/0 /tmp/test.img
memlock: Cannot allocate memory
Couldn't lock into memory, exiting.

aaaaack. WTF? why won't this ever work for me? this is going to be the 3rd time ive crashed a box because of this.  :oops:

BTW, i appreciate the useful replies everyone


"Ignorance is bliss, for stupid people."
"open-source is [...] programming Darwinism."
Vaughan-Nichols

Offline

#92 2006-01-19 21:58:37

juergen
Developer
From: Frankfurt/Germany
Registered: 2005-04-11
Posts: 48
Website

Re: INITRD - share your woes

Your memory lock resource limit is exeeded? losetup works fine here with defaults:

# ulimit -l
40000

Try to increase:

# ulimit -l YOURLIMIT

Offline

#93 2006-01-19 23:04:59

yak8998
Member
Registered: 2004-03-01
Posts: 143

Re: INITRD - share your woes

juergen wrote:

Your memory lock resource limit is exeeded? losetup works fine here with defaults:

# ulimit -l
40000

Try to increase:

# ulimit -l YOURLIMIT

none of that is doing anything...no response, its like i didnt even type anything...? GAWD MY BOX IS BROKEN  :oops:


"Ignorance is bliss, for stupid people."
"open-source is [...] programming Darwinism."
Vaughan-Nichols

Offline

#94 2006-01-20 07:01:52

elasticdog
Member
From: Washington, USA
Registered: 2005-05-02
Posts: 995
Website

Re: INITRD - share your woes

Possibly a stupid question, but...do we have to add <code>etc/mkinitrd.conf</code> to the <code>NoUpgrade</code> option of <code>pacman.conf</code> in order to not have to re-customize it everytime there's a new kernel?

--==EDIT==--
DOH!  Wrong file name...

Offline

#95 2006-01-20 16:35:58

Snowman
Developer/Forum Fellow
From: Montreal, Canada
Registered: 2004-08-20
Posts: 5,212

Re: INITRD - share your woes

elasticdog wrote:

Possibly a stupid question, but...do we have to add <code>etc/initrd.conf</code> to the <code>NoUpgrade</code> option of <code>pacman.conf</code> in order to not have to re-customize it everytime there's a new kernel?

Yes, but the filename is etc/mkinitrd.conf

Offline

#96 2006-01-21 10:03:39

Michiel
Member
From: Westkapelle, Zeeland, NL
Registered: 2005-02-13
Posts: 34
Website

Re: INITRD - share your woes

I have:

michiel@vanessa ~$ grep FS /etc/mkinitrd.conf 
# REMOVE_FS:            removes the complete Filesystems
REMOVE_FS="xfs jfs reiserfs"

But this doesn't seem to help.. A cut from `lsmod`:

xfs                   615552  0 
reiserfs              269424  0 
jfs                   192636  0 

All you got to do, is tell the story right...

Offline

#97 2006-01-21 11:26:32

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,322

Re: INITRD - share your woes

argh wrong syntax, just specify your fs
eg:
FILESYSTEMS="reiserfs"

Offline

#98 2006-01-22 14:24:16

jesus franco
Member
From: PA, USA
Registered: 2005-05-17
Posts: 68

Re: INITRD - share your woes

I reinstalled Arch and it got a horrible error...

/bin/sh: can't access tty; job control turned off

I get dropped into busybox.
I tried booting the kernel with initrd26-full.img, still no go. I tried mounting my drive on my main machine chrooted into it, and tried mkinitrd auto. It builds it, but when I reboot same error.

Initrds internal..

[root@RoXoR media]# ls -R /mnt/initrd
/mnt/initrd:
bin  dev  etc  lib  linuxrc  new_root  proc  sbin  sys

/mnt/initrd/bin:
awk      chroot  fsck    mkdir      mount       rm   sleep
busybox  cp      insmod  mknod      pivot_root  sed  test
cat      echo    ls      mkrootdev  reboot      sh   umount

/mnt/initrd/dev:
console  tty

/mnt/initrd/etc:
fstab

/mnt/initrd/lib:
aec62xx.ko   cy82c693.ko  ide-disk.ko      pdc202xx_old.ko  sis5513.ko
alim15x3.ko  ext3.ko      ide-floppy.ko    piix.ko          slc90e66.ko
amd74xx.ko   generic.ko   it821x.ko        reiserfs.ko      triflex.ko
atiixp.ko    hpt34x.ko    jbd.ko           rz1000.ko        trm290.ko
cdrom.ko     hpt366.ko    jfs.ko           sc1200.ko        via82cxxx.ko
cmd64x.ko    ide-cd.ko    ns87415.ko       serverworks.ko   xfs.ko
cs5530.ko    ide-core.ko  pdc202xx_new.ko  siimage.ko

/mnt/initrd/new_root:

/mnt/initrd/proc:

/mnt/initrd/sbin:
fsck.ext2  fsck.ext3  fsck.jfs  fsck.reiserfs  fsck.xfs

/mnt/initrd/sys:

I did a ftp install as I always do, I used auto partition as I always do. I used the official arch mirror so it's fully up to date.

The first harddrive is /dev/hda1 (ext2 for boot)
the second is /dev/hda2 (swap)
the third is the root partition /dev/hda3 (ext3 for /)

this is my menu.lst

[root@RoXoR ~]# cat /mnt/arch/boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
#
#  Linux           Grub
# -------------------------
#  /dev/fd0        (fd0)
#  /dev/hda        (hd0)
#  /dev/hdb2       (hd1,1)
#  /dev/hda3       (hd0,2)
#

# general configuration:
timeout   5
default   0
color light-blue/black light-cyan/blue

# (0) Arch Linux
title  Arch Linux
root   (hd0,0)
kernel (hd0,0)/vmlinuz26 root=/dev/hda3 ro vga=773
initrd /initrd26.img

I'm now on my primary system that never seems to have problems with arch.  :shock:

Offline

#99 2006-01-22 17:25:43

elasticdog
Member
From: Washington, USA
Registered: 2005-05-02
Posts: 995
Website

Re: INITRD - share your woes

I just updated the wiki's initrd page a bit, and had a couple of things to note...

<code>hwdetect</code> doesn't show the proper format for the mkinitrd.conf file when using the hostcontroller flags.  For example:

$ hwdetect --ide
HOSTCONTROLLER_IDE: generic piix

...is what you get, but it should show:

HOSTCONTROLLER_IDE="generic piix"

Also, what is the downside of disabling cdrom support?  I noticed that the one person who had done it said his cdrom was no longer was accessible even after bootup, but shouldn't it be okay as long as they're not trying to boot from a kernel on a cd?

Offline

#100 2006-01-22 17:44:25

elasticdog
Member
From: Washington, USA
Registered: 2005-05-02
Posts: 995
Website

Re: INITRD - share your woes

One last thing...I too have not been able to remove <code>ide-floppy</code> from loading.

Offline

Board footer

Powered by FluxBB