You are not logged in.
I install Arch freshly following the official guide into my old box.
My hardware:
AMD 64 X2 3600+
Biostar TA690G AM2
Gainward GT220 650 MHz 1800 MHz 128MB 128-bit GDDR3
DIMM-0 A: 1GB
DIMM-0 B: 1GB
DIMM-1 A: 2GB
DIMM-1 B: 2GB
Software version:
local/linux 3.12.7-1 (base)
local/xorg-server 1.14.5-2 (xorg)
local/nvidia 331.20-4
The Xorg.0.log:
[ 94.931]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 94.954] X Protocol Version 11, Revision 0
[ 94.962] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 94.969] Current Operating System: Linux agroom 3.12.7-1-ARCH #1 SMP PREEMPT Fri Jan 10 08:50:35 CET 2014 x86_64
[ 94.969] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=91f84671-9c13-41a0-b9cd-fd8d21787d10 rw pci=noacpi
[ 94.984] Build Date: 06 January 2014 10:25:32PM
[ 94.991]
[ 94.998] Current version of pixman: 0.32.4
[ 95.013] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 95.013] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 95.042] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 12 15:55:05 2014
[ 95.070] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 95.084] (==) No Layout section. Using the first Screen section.
[ 95.084] (==) No screen section available. Using defaults.
[ 95.084] (**) |-->Screen "Default Screen Section" (0)
[ 95.084] (**) | |-->Monitor "<default monitor>"
[ 95.084] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 95.084] (==) Automatically adding devices
[ 95.084] (==) Automatically enabling devices
[ 95.084] (==) Automatically adding GPU devices
[ 95.132] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 95.132] Entry deleted from font path.
[ 95.183] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 95.183] Entry deleted from font path.
[ 95.183] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 95.184] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 95.184] Entry deleted from font path.
[ 95.184] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 95.184] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 95.184] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 95.184] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 95.184] (II) Loader magic: 0x7fac20
[ 95.184] (II) Module ABI versions:
[ 95.184] X.Org ANSI C Emulation: 0.4
[ 95.184] X.Org Video Driver: 14.1
[ 95.184] X.Org XInput driver : 19.1
[ 95.184] X.Org Server Extension : 7.0
[ 95.184] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 95.186] (--) PCI:*(0:1:0:0) 10de:0a20:10b0:0401 rev 162, Mem @ 0xfb000000/16777216, 0xb0000000/268435456, 0xce000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/524288
[ 95.204] Initializing built-in extension Generic Event Extension
[ 95.211] Initializing built-in extension SHAPE
[ 95.218] Initializing built-in extension MIT-SHM
[ 95.225] Initializing built-in extension XInputExtension
[ 95.232] Initializing built-in extension XTEST
[ 95.239] Initializing built-in extension BIG-REQUESTS
[ 95.245] Initializing built-in extension SYNC
[ 95.252] Initializing built-in extension XKEYBOARD
[ 95.258] Initializing built-in extension XC-MISC
[ 95.264] Initializing built-in extension SECURITY
[ 95.270] Initializing built-in extension XINERAMA
[ 95.278] Initializing built-in extension XFIXES
[ 95.284] Initializing built-in extension RENDER
[ 95.289] Initializing built-in extension RANDR
[ 95.294] Initializing built-in extension COMPOSITE
[ 95.299] Initializing built-in extension DAMAGE
[ 95.304] Initializing built-in extension MIT-SCREEN-SAVER
[ 95.308] Initializing built-in extension DOUBLE-BUFFER
[ 95.313] Initializing built-in extension RECORD
[ 95.318] Initializing built-in extension DPMS
[ 95.323] Initializing built-in extension X-Resource
[ 95.327] Initializing built-in extension XVideo
[ 95.332] Initializing built-in extension XVideo-MotionCompensation
[ 95.336] Initializing built-in extension XFree86-VidModeExtension
[ 95.341] Initializing built-in extension XFree86-DGA
[ 95.345] Initializing built-in extension XFree86-DRI
[ 95.350] Initializing built-in extension DRI2
[ 95.350] (II) LoadModule: "glx"
[ 95.393] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 96.523] (II) Module glx: vendor="NVIDIA Corporation"
[ 96.523] compiled for 4.0.2, module version = 1.0.0
[ 96.523] Module class: X.Org Server Extension
[ 96.523] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 96.540] Loading extension GLX
[ 96.540] (==) Matched nouveau as autoconfigured driver 0
[ 96.540] (==) Matched nvidia as autoconfigured driver 1
[ 96.540] (==) Matched nv as autoconfigured driver 2
[ 96.540] (==) Matched nouveau as autoconfigured driver 3
[ 96.540] (==) Matched nvidia as autoconfigured driver 4
[ 96.540] (==) Matched nv as autoconfigured driver 5
[ 96.540] (==) Matched vesa as autoconfigured driver 6
[ 96.540] (==) Matched modesetting as autoconfigured driver 7
[ 96.540] (==) Matched fbdev as autoconfigured driver 8
[ 96.540] (==) Assigned the driver to the xf86ConfigLayout
[ 96.540] (II) LoadModule: "nouveau"
[ 96.559] (WW) Warning, couldn't open module nouveau
[ 96.559] (II) UnloadModule: "nouveau"
[ 96.559] (II) Unloading nouveau
[ 96.559] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 96.559] (II) LoadModule: "nvidia"
[ 96.560] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 96.642] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 96.642] compiled for 4.0.2, module version = 1.0.0
[ 96.642] Module class: X.Org Video Driver
[ 96.647] (II) LoadModule: "nv"
[ 96.648] (WW) Warning, couldn't open module nv
[ 96.648] (II) UnloadModule: "nv"
[ 96.648] (II) Unloading nv
[ 96.648] (EE) Failed to load module "nv" (module does not exist, 0)
[ 96.648] (II) LoadModule: "vesa"
[ 96.648] (WW) Warning, couldn't open module vesa
[ 96.648] (II) UnloadModule: "vesa"
[ 96.648] (II) Unloading vesa
[ 96.648] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 96.648] (II) LoadModule: "modesetting"
[ 96.649] (WW) Warning, couldn't open module modesetting
[ 96.649] (II) UnloadModule: "modesetting"
[ 96.649] (II) Unloading modesetting
[ 96.649] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 96.649] (II) LoadModule: "fbdev"
[ 96.650] (WW) Warning, couldn't open module fbdev
[ 96.650] (II) UnloadModule: "fbdev"
[ 96.650] (II) Unloading fbdev
[ 96.650] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 96.650] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 96.650] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 96.651] (++) using VT number 1
[ 96.659] (II) Loading sub module "fb"
[ 96.659] (II) LoadModule: "fb"
[ 96.659] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 96.675] (II) Module fb: vendor="X.Org Foundation"
[ 96.675] compiled for 1.14.5, module version = 1.0.0
[ 96.675] ABI class: X.Org ANSI C Emulation, version 0.4
[ 96.676] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 96.676] (II) Loading sub module "wfb"
[ 96.676] (II) LoadModule: "wfb"
[ 96.676] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 96.682] (II) Module wfb: vendor="X.Org Foundation"
[ 96.682] compiled for 1.14.5, module version = 1.0.0
[ 96.682] ABI class: X.Org ANSI C Emulation, version 0.4
[ 96.682] (II) Loading sub module "ramdac"
[ 96.682] (II) LoadModule: "ramdac"
[ 96.682] (II) Module "ramdac" already built-in
[ 96.715] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 96.715] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 96.715] (==) NVIDIA(0): RGB weight 888
[ 96.715] (==) NVIDIA(0): Default visual is TrueColor
[ 96.715] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 96.716] (**) NVIDIA(0): Enabling 2D acceleration
[ 97.704] (II) NVIDIA(0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[ 97.704] (II) NVIDIA(0): 3D Vision stereo.
[ 97.704] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 97.706] (II) NVIDIA(0): NVIDIA GPU GeForce GT 220 (GT216) at PCI:1:0:0 (GPU-0)
[ 97.706] (--) NVIDIA(0): Memory: 131072 kBytes
[ 97.706] (--) NVIDIA(0): VideoBIOS: 70.16.2e.00.00
[ 97.706] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 100.708] (--) NVIDIA(0): Valid display device(s) on GeForce GT 220 at PCI:1:0:0
[ 100.708] (--) NVIDIA(0): CRT-0
[ 100.708] (--) NVIDIA(0): CRT-1
[ 100.708] (--) NVIDIA(0): Samsung SyncMaster (DFP-0) (boot, connected)
[ 100.708] (--) NVIDIA(0): DFP-1
[ 100.708] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 100.708] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 100.708] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 100.708] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 100.708] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 100.708] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 100.708] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 100.708] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 100.708] (**) NVIDIA(0): has been enabled on all display devices.)
[ 100.713] (==) NVIDIA(0):
[ 100.714] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 100.714] (==) NVIDIA(0): will be used as the requested mode.
[ 100.714] (==) NVIDIA(0):
[ 100.714] (II) NVIDIA(0): Validated MetaModes:
[ 100.714] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 100.714] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 100.752] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 100.752] (--) NVIDIA(0): option
[ 100.752] (--) Depth 24 pixmap format is 32 bpp
[ 100.752] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 103.755] (EE) NVIDIA(GPU-0): Failed to initialize DMA.
[ 103.755] (EE) *** Aborting ***
[ 104.129] (EE)
Fatal server error:
[ 104.129] (EE) AddScreen/ScreenInit failed for driver 0
[ 104.129] (EE)
[ 104.129] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 104.129] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 104.129] (EE)
[ 104.151] (EE) Server terminated with error (1). Closing log file.And the output of dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 10 08:50:35 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=91f84671-9c13-41a0-b9cd-fd8d21787d10 rw pci=noacpi
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afedffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afee0000-0x00000000afee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afee3000-0x00000000afeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afef0000-0x00000000afefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cfffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: BIOSTAR Group R690A-M2T/R690A-M2T, BIOS 6.00 PG 06/04/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1d0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 00AFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FF80000000 write-back
[ 0.000000] 5 base 0180000000 mask FFC0000000 write-back
[ 0.000000] 6 base 01C0000000 mask FFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001d0000000 aka 7424M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xafee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f3cd0-0x000f3cdf] mapped at [ffff8800000f3cd0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1cfe00000-0x1cfffffff]
[ 0.000000] [mem 0x1cfe00000-0x1cfffffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1cc000000-0x1cfdfffff]
[ 0.000000] [mem 0x1cc000000-0x1cfdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1cbffffff]
[ 0.000000] [mem 0x180000000-0x1cbffffff] page 2M
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xafedffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xafdfffff] page 2M
[ 0.000000] [mem 0xafe00000-0xafedffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37a18000-0x37d03fff]
[ 0.000000] ACPI: RSDP 00000000000f7e00 00024 (v02 RS690 )
[ 0.000000] ACPI: XSDT 00000000afee30c0 0004C (v01 RS690 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000afee7b80 000F4 (v03 RS690 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000afee3240 048E5 (v01 RS690 AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000afee0000 00040
[ 0.000000] ACPI: SSDT 00000000afee7d80 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000afee7fc0 00038 (v01 RS690 AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000afee8040 0003C (v01 RS690 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000afee7cc0 00068 (v01 RS690 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001cfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1cfffffff]
[ 0.000000] NODE_DATA [mem 0x1cfff7000-0x1cfffbfff]
[ 0.000000] [ffffea0000000000-ffffea00073fffff] PMD -> [ffff8801c9600000-ffff8801cf5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1cfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xafedffff]
[ 0.000000] node 0: [mem 0x100000000-0x1cfffffff]
[ 0.000000] On node 0 totalpages: 1572478
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11196 pages used for memmap
[ 0.000000] DMA32 zone: 716512 pages, LIFO batch:31
[ 0.000000] Normal zone: 13312 pages used for memmap
[ 0.000000] Normal zone: 851968 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 2
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafee0000-0xafee2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafee3000-0xafeeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafef0000-0xafefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xaff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801cfc00000 s86464 r8192 d24128 u1048576
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1547885
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=91f84671-9c13-41a0-b9cd-fd8d21787d10 rw pci=noacpi
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ a4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
[ 0.000000] Memory: 6044940K/6289912K available (5115K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 244972K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:8448 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1895.109 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.006672] Calibrating delay loop (skipped), value calculated using timer frequency.. 3791.14 BogoMIPS (lpj=6317030)
[ 0.006676] pid_max: default: 32768 minimum: 301
[ 0.006722] Security Framework initialized
[ 0.006733] AppArmor: AppArmor disabled by boot time parameter
[ 0.006735] Yama: becoming mindful.
[ 0.007761] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015319] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017976] Mount-cache hash table entries: 256
[ 0.018293] Initializing cgroup subsys memory
[ 0.018315] Initializing cgroup subsys devices
[ 0.018318] Initializing cgroup subsys freezer
[ 0.018320] Initializing cgroup subsys net_cls
[ 0.018323] Initializing cgroup subsys blkio
[ 0.018351] tseg: 00aff00000
[ 0.018354] CPU: Physical Processor ID: 0
[ 0.018355] CPU: Processor Core ID: 0
[ 0.018358] mce: CPU supports 5 MCE banks
[ 0.018365] LVT offset 0 assigned for vector 0xf9
[ 0.018369] process: using AMD E400 aware idle routine
[ 0.018372] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.018483] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.019386] ACPI: Core revision 20130725
[ 0.022342] ACPI: All ACPI Tables successfully acquired
[ 0.023369] ftrace: allocating 20316 entries in 80 pages
[ 0.033571] ExtINT not setup in hardware but reported by MP table
[ 0.034099] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.068401] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
[ 0.069999] Performance Events: AMD PMU driver.
[ 0.069999] ... version: 0
[ 0.069999] ... bit width: 48
[ 0.069999] ... generic registers: 4
[ 0.069999] ... value mask: 0000ffffffffffff
[ 0.069999] ... max period: 00007fffffffffff
[ 0.069999] ... fixed-purpose events: 0
[ 0.069999] ... event mask: 000000000000000f
[ 0.083385] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090096] smpboot: Booting Node 0, Processors # 1 OK
[ 0.183450] Brought up 2 CPUs
[ 0.183454] smpboot: Total of 2 processors activated (7583.58 BogoMIPS)
[ 0.184100] devtmpfs: initialized
[ 0.190361] PM: Registering ACPI NVS region [mem 0xafee0000-0xafee2fff] (12288 bytes)
[ 0.191667] RTC time: 7:53:30, date: 01/12/14
[ 0.191753] NET: Registered protocol family 16
[ 0.191933] cpuidle: using governor ladder
[ 0.191935] cpuidle: using governor menu
[ 0.191941] node 0 link 0: io port [c000, ffff]
[ 0.191944] TOM: 00000000b0000000 aka 2816M
[ 0.191947] node 0 link 0: mmio [a0000, bffff]
[ 0.191950] node 0 link 0: mmio [b0000000, dfffffff]
[ 0.191954] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.191956] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.191958] TOM2: 00000001d0000000 aka 7424M
[ 0.191962] bus: [bus 00-03] on node 0 link 0
[ 0.191964] bus: 00 [io 0x0000-0xffff]
[ 0.191966] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.191968] bus: 00 [mem 0xb0000000-0xefffffff]
[ 0.191970] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.191972] bus: 00 [mem 0x1d0000000-0xfcffffffff]
[ 0.192008] ACPI: bus type PCI registered
[ 0.192011] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.192107] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.192111] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.205846] PCI: Using configuration type 1 for base access
[ 0.206110] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.206112] mtrr: probably your BIOS does not setup all CPUs.
[ 0.206113] mtrr: corrected configuration.
[ 0.206900] bio: create slab <bio-0> at 0
[ 0.206924] ACPI: Added _OSI(Module Device)
[ 0.206924] ACPI: Added _OSI(Processor Device)
[ 0.206924] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.206924] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.207525] ACPI: EC: Look up EC in DSDT
[ 0.208383] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.212550] ACPI: Interpreter enabled
[ 0.212562] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.212569] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.212587] ACPI: (supports S0 S3 S4 S5)
[ 0.212590] ACPI: Using PIC for interrupt routing
[ 0.212744] ACPI: No dock devices found.
[ 0.228831] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.228842] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.228879] Found 1 acpi root devices
[ 0.228981] vgaarb: loaded
[ 0.228981] PCI: Probing PCI hardware
[ 0.228981] PCI: root bus 00: hardware-probed resources
[ 0.228981] PCI: Probing PCI hardware (bus 00)
[ 0.228981] PCI host bridge to bus 0000:00
[ 0.228981] pci_bus 0000:00: root bus resource [bus 00-03]
[ 0.228981] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.228981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.228981] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xefffffff]
[ 0.228981] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.228981] pci_bus 0000:00: root bus resource [mem 0x1d0000000-0xfcffffffff]
[ 0.228981] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
[ 0.228981] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
[ 0.228981] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.228981] pci 0000:00:07.0: [1002:7917] type 01 class 0x060400
[ 0.228981] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.228981] pci 0000:00:12.0: [1002:4380] type 00 class 0x010601
[ 0.228981] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
[ 0.228981] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.228981] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.228981] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.228981] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.228981] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.228981] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.228981] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.228981] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.228981] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.228981] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.228981] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
[ 0.228981] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.228981] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.230105] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.230121] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.230229] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.230251] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.230343] pci 0000:00:13.5: supports D1 D2
[ 0.230346] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.230408] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.230433] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.230444] pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
[ 0.230564] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.230583] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.230594] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.230606] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.230617] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.230628] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.230728] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.230755] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.230839] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.230899] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.231012] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.231095] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.231149] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.231198] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.231248] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.231363] pci 0000:01:00.0: [10de:0a20] type 00 class 0x030000
[ 0.231375] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.231387] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.231399] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.231408] pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f]
[ 0.231418] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.231493] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.231516] pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
[ 0.231527] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
[ 0.236684] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.236689] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.236693] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.236698] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
[ 0.236767] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.236783] pci 0000:02:00.0: reg 0x10: [io 0xee00-0xeeff]
[ 0.236808] pci 0000:02:00.0: reg 0x18: [mem 0xfdeff000-0xfdefffff 64bit]
[ 0.236838] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.236902] pci 0000:02:00.0: supports D1 D2
[ 0.236905] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.236966] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.236974] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.236979] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.236982] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.236987] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.237041] pci 0000:03:05.0: [168c:0029] type 00 class 0x028000
[ 0.237066] pci 0000:03:05.0: reg 0x10: [mem 0xfddf0000-0xfddfffff]
[ 0.237175] pci 0000:03:05.0: PME# supported from D0 D3hot
[ 0.237270] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.237275] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.237281] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.237286] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.237290] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.237293] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.237296] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xefffffff] (subtractive decode)
[ 0.237299] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.237302] pci 0000:00:14.4: bridge window [mem 0x1d0000000-0xfcffffffff] (subtractive decode)
[ 0.246998] PCI: pci_cache_line_size set to 64 bytes
[ 0.247060] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.247063] e820: reserve RAM buffer [mem 0xafee0000-0xafffffff]
[ 0.247199] NetLabel: Initializing
[ 0.247201] NetLabel: domain hash size = 128
[ 0.247203] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.247218] NetLabel: unlabeled traffic allowed by default
[ 0.247252] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.247257] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.249318] Switched to clocksource hpet
[ 0.253935] pnp: PnP ACPI init
[ 0.253960] ACPI: bus type PNP registered
[ 0.254149] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.254359] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.254367] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.254402] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.254405] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.254408] system 00:01: [io 0x040b] has been reserved
[ 0.254411] system 00:01: [io 0x04d6] has been reserved
[ 0.254414] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.254417] system 00:01: [io 0x0c14] has been reserved
[ 0.254420] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.254424] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.254427] system 00:01: [io 0x0c6f] has been reserved
[ 0.254430] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.254433] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.254436] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.254440] system 00:01: [io 0x4000-0x40fe] could not be reserved
[ 0.254443] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.254446] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.254451] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.254456] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.254580] pnp 00:02: [dma 4]
[ 0.254613] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.254717] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.254783] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.254816] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.254853] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.254932] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.255007] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.255010] system 00:08: [io 0x0220-0x0225] has been reserved
[ 0.255014] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.255522] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.255600] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.255604] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.255724] pnp 00:0b: disabling [mem 0xfed00000-0xfed000ff] because it overlaps 0000:00:14.0 BAR 1 [mem 0xfed00000-0xfed003ff]
[ 0.255770] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.255774] system 00:0b: [mem 0xaff00000-0xafffffff] could not be reserved
[ 0.255777] system 00:0b: [mem 0xafee0000-0xafefffff] could not be reserved
[ 0.255781] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.255785] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.255788] system 00:0b: [mem 0x00100000-0xafedffff] could not be reserved
[ 0.255791] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.255795] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.255798] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.255803] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.255813] pnp: PnP ACPI: found 12 devices
[ 0.255815] ACPI: bus type PNP unregistered
[ 0.263737] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0000000-0xc007ffff pref]
[ 0.263743] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.263747] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.263751] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.263755] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
[ 0.263761] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.263764] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.263767] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.263771] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.263775] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.263780] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.263784] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.263791] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.263796] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.263805] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.263808] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.263811] pci_bus 0000:00: resource 6 [mem 0xb0000000-0xefffffff]
[ 0.263814] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.263817] pci_bus 0000:00: resource 8 [mem 0x1d0000000-0xfcffffffff]
[ 0.263821] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.263824] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.263827] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcfffffff 64bit pref]
[ 0.263831] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.263834] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.263837] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.263841] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.263844] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.263848] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.263851] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.263854] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.263857] pci_bus 0000:03: resource 6 [mem 0xb0000000-0xefffffff]
[ 0.263861] pci_bus 0000:03: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.263864] pci_bus 0000:03: resource 8 [mem 0x1d0000000-0xfcffffffff]
[ 0.263918] NET: Registered protocol family 2
[ 0.264241] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.264957] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.265612] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.265695] TCP: reno registered
[ 0.265715] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.265815] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.266002] NET: Registered protocol family 1
[ 0.266050] pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.343378] pci 0000:00:13.1: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 0.420040] pci 0000:00:13.2: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 0.496705] pci 0000:00:13.3: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 0.563371] pci 0000:00:13.4: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 0.630041] pci 0000:00:13.5: PCI->APIC IRQ transform: INT D -> IRQ 19
[ 0.630097] pci 0000:01:00.0: Boot video device
[ 0.630116] PCI: CLS 4 bytes, default 64
[ 0.630184] Unpacking initramfs...
[ 0.712889] Freeing initrd memory: 2992K (ffff880037a18000 - ffff880037d04000)
[ 0.713763] PCI-DMA: Disabling AGP.
[ 0.713856] PCI-DMA: aperture base @ a4000000 size 65536 KB
[ 0.713858] PCI-DMA: using GART IOMMU.
[ 0.713863] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.718379] Scanning for low memory corruption every 60 seconds
[ 0.718763] audit: initializing netlink socket (disabled)
[ 0.718781] type=2000 audit(1389513210.716:1): initialized
[ 0.734379] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.736579] zbud: loaded
[ 0.736859] VFS: Disk quotas dquot_6.5.2
[ 0.736928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.737201] msgmni has been set to 11941
[ 0.737658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.737718] io scheduler noop registered
[ 0.737720] io scheduler deadline registered
[ 0.737762] io scheduler cfq registered (default)
[ 0.737905] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.737995] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 0.738084] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.738106] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.738181] vesafb: mode is 1440x900x32, linelength=5760, pages=0
[ 0.738182] vesafb: scrolling: redraw
[ 0.738185] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.738470] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010f00000, using 5120k, total 5120k
[ 0.760940] Console: switching to colour frame buffer device 180x56
[ 0.783188] fb0: VESA VGA frame buffer device
[ 0.783242] GHES: HEST is not enabled!
[ 0.783319] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.783999] Linux agpgart interface v0.103
[ 0.784069] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.784071] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.784227] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.784389] mousedev: PS/2 mouse device common for all mice
[ 0.784464] rtc_cmos 00:04: RTC can wake from S4
[ 0.784629] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.784669] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.784775] drop_monitor: Initializing network drop monitor service
[ 0.784859] TCP: cubic registered
[ 0.785005] NET: Registered protocol family 10
[ 0.785258] NET: Registered protocol family 17
[ 0.785269] Key type dns_resolver registered
[ 0.785626] registered taskstats version 1
[ 0.786316] Magic number: 14:947:874
[ 0.786429] rtc_cmos 00:04: setting system clock to 2014-01-12 07:53:31 UTC (1389513211)
[ 0.786480] PM: Hibernation image not present or could not be loaded.
[ 0.788543] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.788548] Write protecting the kernel read-only data: 8192k
[ 0.792737] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
[ 0.794474] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[ 0.809022] systemd-udevd[47]: starting version 208
[ 0.810263] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.848268] ACPI: bus type USB registered
[ 0.848308] usbcore: registered new interface driver usbfs
[ 0.848323] usbcore: registered new interface driver hub
[ 0.850758] SCSI subsystem initialized
[ 0.853068] usbcore: registered new device driver usb
[ 0.855173] libata version 3.00 loaded.
[ 0.855368] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.855522] pata_atiixp 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.855961] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.856023] scsi0 : pata_atiixp
[ 0.856185] ehci-pci: EHCI PCI platform driver
[ 0.856371] ohci-pci: OHCI PCI platform driver
[ 0.856716] scsi1 : pata_atiixp
[ 0.856769] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 0.856771] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 0.856844] ehci-pci 0000:00:13.5: PCI->APIC IRQ transform: INT D -> IRQ 19
[ 0.856884] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 0.856894] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 0.856904] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 0.856921] ehci-pci 0000:00:13.5: debug port 1
[ 0.856976] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[ 0.866698] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 0.866939] hub 1-0:1.0: USB hub found
[ 0.866952] hub 1-0:1.0: 10 ports detected
[ 0.867447] ohci-pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.867475] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.867484] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.867520] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 0.924283] hub 2-0:1.0: USB hub found
[ 0.924300] hub 2-0:1.0: 2 ports detected
[ 0.924496] ohci-pci 0000:00:13.1: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 0.924523] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.924531] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.924566] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 0.980890] hub 3-0:1.0: USB hub found
[ 0.980903] hub 3-0:1.0: 2 ports detected
[ 0.981068] ohci-pci 0000:00:13.2: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 0.981083] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 0.981091] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.981118] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.037897] ata1.00: ATAPI: BENQ DVD DC DW1800, ZB35, max UDMA/66
[ 1.037990] hub 4-0:1.0: USB hub found
[ 1.038002] hub 4-0:1.0: 2 ports detected
[ 1.038159] ohci-pci 0000:00:13.3: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 1.038178] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 1.038188] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.038205] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.067148] ata1.00: configured for UDMA/66
[ 1.068957] scsi 0:0:0:0: CD-ROM BENQ DVD DC DW1800 ZB35 PQ: 0 ANSI: 5
[ 1.094213] hub 5-0:1.0: USB hub found
[ 1.094226] hub 5-0:1.0: 2 ports detected
[ 1.094390] ohci-pci 0000:00:13.4: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 1.094412] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 1.094422] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.094442] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.150877] hub 6-0:1.0: USB hub found
[ 1.150889] hub 6-0:1.0: 2 ports detected
[ 1.151069] ahci 0000:00:12.0: version 3.0
[ 1.151089] ahci 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 1.151117] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.151216] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.151221] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.155088] scsi2 : ahci
[ 1.155206] scsi3 : ahci
[ 1.155302] scsi4 : ahci
[ 1.155398] scsi5 : ahci
[ 1.155468] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.155472] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.155475] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.155479] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.162857] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.162864] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.163171] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.370046] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 1.473389] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.473444] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.473526] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.532206] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.537136] usbcore: registered new interface driver usbhid
[ 1.537141] usbhid: USB HID core driver
[ 1.538214] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input1
[ 1.538846] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-2/input0
[ 1.640028] ata3: softreset failed (device not ready)
[ 1.640170] ata3: applying PMP SRST workaround and retrying
[ 1.806702] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.849522] ata3.00: ATA-7: ST3250824SV, 3.ACP, max UDMA/133
[ 1.849525] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.849529] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.907817] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.907820] ata3.00: configured for UDMA/133
[ 1.908023] scsi 2:0:0:0: Direct-Access ATA ST3250824SV 3.AC PQ: 0 ANSI: 5
[ 1.909351] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.909476] sd 2:0:0:0: [sda] Write Protect is off
[ 1.909483] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.909516] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.990212] sda: sda1 sda2 sda3 sda4
[ 1.990877] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.960194] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.578155] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.579087] systemd[1]: Set hostname to <agroom>.
[ 4.164301] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.164714] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.164829] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.164852] systemd[1]: Starting Remote File Systems.
[ 4.165104] systemd[1]: Reached target Remote File Systems.
[ 4.165125] systemd[1]: Expecting device sys-subsystem-net-devices-wlp3s5.device...
[ 4.165361] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.165614] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.165631] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.165883] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.165900] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.166147] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.166163] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.166381] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.166439] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.166909] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.166936] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.167000] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.167016] systemd[1]: Starting Paths.
[ 4.167181] systemd[1]: Reached target Paths.
[ 4.167203] systemd[1]: Starting udev Kernel Socket.
[ 4.167409] systemd[1]: Listening on udev Kernel Socket.
[ 4.167430] systemd[1]: Starting udev Control Socket.
[ 4.167640] systemd[1]: Listening on udev Control Socket.
[ 4.167664] systemd[1]: Starting Journal Socket.
[ 4.167895] systemd[1]: Listening on Journal Socket.
[ 4.189777] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.191049] systemd[1]: Starting udev Coldplug all Devices...
[ 4.217499] systemd[1]: Starting Apply Kernel Variables...
[ 4.218467] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.219504] systemd[1]: Starting Setup Virtual Console...
[ 4.220709] systemd[1]: Mounting Debug File System...
[ 4.230615] systemd[1]: Started Load Kernel Modules.
[ 4.230667] systemd[1]: Mounting Huge Pages File System...
[ 4.231556] systemd[1]: Mounting Configuration File System...
[ 4.242031] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.242075] systemd[1]: Starting Journal Service...
[ 4.243252] systemd[1]: Started Journal Service.
[ 4.614089] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 4.829439] systemd-journald[116]: Vacuuming done, freed 0 bytes
[ 5.122801] systemd-udevd[142]: starting version 208
[ 5.713973] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.721131] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.721143] ACPI: Power Button [PWRB]
[ 5.721230] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.721234] ACPI: Sleep Button [SLPB]
[ 5.721322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.721325] ACPI: Power Button [PWRF]
[ 5.722284] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.722290] ACPI: Thermal Zone [THRM] (40 C)
[ 5.732719] ACPI: Fan [FAN] (on)
[ 5.869728] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.869769] r8169 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 19
[ 5.869947] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 5.870237] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xffffc90011b1a000, 00:e0:4d:1b:7b:a0, XID 18000000 IRQ 42
[ 5.870241] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 5.882496] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.882601] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
[ 5.886005] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 5.886074] sp5100_tco: PCI Revision ID: 0x13
[ 5.886096] sp5100_tco: failed to find MMIO address, giving up.
[ 5.940942] [drm] Initialized drm 1.1.0 20060810
[ 6.085796] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 6.118108] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.121133] MCE: In-kernel MCE decoding enabled.
[ 6.251072] systemd-udevd[145]: renamed network interface eth0 to enp2s0
[ 6.251720] microcode: AMD CPU family 0xf not supported
[ 6.535784] snd_hda_intel 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 6.535851] snd_hda_intel 0000:00:14.2: irq 43 for MSI/MSI-X
[ 6.536499] kvm: Nested Virtualization enabled
[ 6.579895] powernow-k8: fid 0xb (1900 MHz), vid 0xa
[ 6.579901] powernow-k8: fid 0xa (1800 MHz), vid 0xb
[ 6.579903] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 6.580045] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
[ 6.716023] EDAC MC: Ver: 3.0.0
[ 6.718997] AMD64 EDAC driver v3.4.0
[ 6.758005] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 6.778148] cfg80211: Calling CRDA to update world regulatory domain
[ 6.796250] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 6.796478] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 6.796653] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 6.797286] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 6.797497] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 6.797717] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 6.797929] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 6.803049] snd_hda_intel 0000:01:00.1: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 6.803061] hda_intel: Disabling MSI
[ 6.803087] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 6.803239] EDAC amd64: DRAM ECC disabled.
[ 6.803253] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 7.153881] ath9k 0000:03:05.0: PCI->APIC IRQ transform: INT A -> IRQ 20
[ 7.566904] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 7.567130] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 7.567328] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 7.567498] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 7.915346] nvidia: module license 'NVIDIA' taints kernel.
[ 7.915359] Disabling lock debugging due to kernel taint
[ 8.180310] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.247842] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.356497] systemd-journald[116]: Received request to flush runtime journal from PID 1
[ 8.779576] ath: EEPROM regdomain: 0x809c
[ 8.779587] ath: EEPROM indicates we should expect a country code
[ 8.779591] ath: doing EEPROM country->regdmn map search
[ 8.779595] ath: country maps to regdmn code: 0x52
[ 8.779598] ath: Country alpha2 being used: CN
[ 8.779601] ath: Regpair used: 0x52
[ 8.786104] nvidia 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 8.786118] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 8.787134] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 8.787152] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
[ 8.831973] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.832301] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90013620000, irq=20
[ 9.000289] systemd-udevd[146]: renamed network interface wlan0 to wlp3s5
[ 10.719577] IPv6: ADDRCONF(NETDEV_UP): wlp3s5: link is not ready
[ 11.574745] wlp3s5: authenticate with 00:24:a5:f0:1e:2c
[ 11.598185] wlp3s5: send auth to 00:24:a5:f0:1e:2c (try 1/3)
[ 11.600609] wlp3s5: authenticated
[ 11.603383] wlp3s5: associate with 00:24:a5:f0:1e:2c (try 1/3)
[ 11.607108] wlp3s5: RX AssocResp from 00:24:a5:f0:1e:2c (capab=0x411 status=0 aid=2)
[ 11.607212] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s5: link becomes ready
[ 11.607311] wlp3s5: associated
[ 96.746439] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
[ 97.623093] NVRM: Your system is not currently configured to drive a VGA console
[ 97.623100] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 97.623103] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 97.623106] NVRM: drivers including, but not limited to, vesafb, may result in
[ 97.623108] NVRM: corruption and stability problems, and is not supported.
[ 97.708200] NVRM: GPU at 0000:01:00: GPU-76cb2a8f-762a-5e0c-6629-8e6f4fa10a6d
[ 97.708210] NVRM: Xid (0000:01:00): 56, CMDre 00000000 00000000 00000000 00000001 00000001
[ 100.754766] NVRM: Xid (0000:01:00): 6, PE0001
[ 141.963843] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
[ 142.112677] NVRM: Xid (0000:01:00): 62, !20bf(3ffc)
[ 162.638436] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
[ 163.355894] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
[ 163.478398] NVRM: Xid (0000:01:00): 62, !20bf(3ffc)The kernel parameter pci=noacpi is passed in grub, or the system couldn't be booted without it.
If I remove the memory banks from DIMM-1 A and DIMM-1 B, totally 2GB RAM remained, it works.
I googled it, found some clues: IOMMU, and tried many kernel parameters as iommu=noaperture, iommu=noapg, ..., it did not work.
Windows XP works very well, Linux (Ubuntu/Arch/Fedora/) has this problem.
I don't know it's the bug of BIOS of mother board, or conflict between AMD690G chipsets and Nvidia GT220, or even fault of this Video Card.
Last edited by cantoraz (2014-01-12 08:53:15)
Offline