You are not logged in.
Pages: 1
hello
i have problem with Nvidia Geforce GT635M driver on my laptop (Asus A46C i5), and i use vanilla kernel 3.12.8(continue upgrade), nvidia-dkms 331.38, nvidia-hook, bbswitch-dkms, bbswitch-hook
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 635M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 100d
Flags: fast devsel, IRQ 11
Memory at f6000000 (32-bit, non-prefetchable) [disabled] [size=16M]
Memory at e0000000 (64-bit, prefetchable) [disabled] [size=256M]
Memory at f0000000 (64-bit, prefetchable) [disabled] [size=32M]
I/O ports at e000 [disabled] [size=128]
Expansion ROM at f7000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel modules: nouveau, nvidia# dkms status
bbswitch, 0.8, 3.12.8-ARCH, x86_64: installed
nvidia, 331.38, 3.12.8-ARCH, x86_64: installed# bumblebeed
modprobe: ERROR: could not insert 'bbswitch': Required key not available
[10552.968815] [ERROR]Module bbswitch could not be loaded (timeout?)
[10552.968852] [WARN]No switching method available. The dedicated card will always be on.
[10552.970320] [INFO]bumblebeed 3.2.1 started# optirun -vvv glxgears
[10637.753099] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[10637.753418] [INFO]Configured driver: nvidia
[10637.753504] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[10637.753532] [DEBUG]Socket closed.
[10637.753563] [ERROR]Could not connect to bumblebee daemon - is it running?
any idea?
sorry for my bad english
Last edited by slackbuntu (2014-01-25 02:09:23)
Offline
did you enabled the bumblebee daemon?
thy using
sudo systemctl enable bumblebeed
and you also need to add your user to the bumblebee group
sudo usermod -a -G bumblebee YOUR_USER_NAME
Last edited by pspkzar (2014-01-25 16:46:04)
Offline
did you enabled the bumblebee daemon?
thy usingsudo systemctl enable bumblebeed
and you also need to add your user to the bumblebee group
sudo usermod -a -G bumblebee YOUR_USER_NAME
ok bumblebee running now
but optirun still failed
optirun -vvv glxgears
[ 759.117247] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 759.117556] [INFO]Configured driver: nvidia
[ 759.117693] [DEBUG]optirun version 3.2.1 starting...
[ 759.117713] [DEBUG]Active configuration:
[ 759.117725] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 759.117737] [DEBUG] X display: :8
[ 759.117750] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 759.117762] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 759.117774] [DEBUG] Accel/display bridge: auto
[ 759.117785] [DEBUG] VGL Compression: proxy
[ 759.117799] [DEBUG] VGLrun extra options:
[ 759.117810] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 759.117841] [DEBUG]Using auto-detected bridge virtualgl
[ 759.124709] [INFO]Response: No - error: Could not load GPU driver[ 759.124728] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 759.124734] [DEBUG]Socket closed.
[ 759.124751] [ERROR]Aborting because fallback start is disabled.
[ 759.124756] [DEBUG]Killing all remaining processes.
Offline
Pages: 1