You are not logged in.

Pages: 1

#1 2014-02-27 07:20:08

Oldmoth
Member
Registered: 2013-01-25
Posts: 24

[Solved] 3.13.5-1 Keymap problems

I updated to 3.13.5-1 and when I rebooted I had the use of my keyboard but not all of the keys, the right side of the letters seems to have rebound to the numpad of a full size keyboard, I have a 13" laptop.
I have done everything as per the 'Linux 3.13 WARNING: PS/2 keyboard support is now modular', announcement.

Output of : dmesg -t | grep '^i8042'

i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

mkinitcpio.conf

MODULES="atkbd"
BINARIES=""
FILES=""
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"

CMD Line in: /etc/default/grub

GRUB_CMDLINE_LINUX_DEFAULT="quiet libata.force=noncq earlymodules=atkbd modules-load=atkbd"

-I have run both 'grub-mkconfig -o /boot/grub/grub.cfg' and 'mkinitcpio -P'.
-External keyboards work no problem.
-I have tried to change the keymap both UK and US are the same.

Suggestions?

Edit: Added more outputs

setxkbmap -print -verbose 10

Setting verbose level to 10
locale is C
Trying to load rules file ./rules/evdev...
Trying to load rules file /usr/share/X11/xkb/rules/evdev...
Success.
Applied rules from evdev:
rules:      evdev
model:      pc104
layout:     us
Trying to build keymap using the following components:
keycodes:   evdev+aliases(qwerty)
types:      complete
compat:     complete
symbols:    pc+us+inet(evdev)
geometry:   pc(pc104)
xkb_keymap {
	xkb_keycodes  { include "evdev+aliases(qwerty)"	};
	xkb_types     { include "complete"	};
	xkb_compat    { include "complete"	};
	xkb_symbols   { include "pc+us+inet(evdev)"	};
	xkb_geometry  { include "pc(pc104)"	};

Last edited by Oldmoth (2014-03-02 04:11:17)

Offline

#2 2014-02-27 18:54:13

Rexilion
Member
Registered: 2013-12-23
Posts: 784

Re: [Solved] 3.13.5-1 Keymap problems

Do you have custom udev rules for this keyboard? If you place those in an external file, it will not be included in the initcpio.

fs/super.c : "Self-destruct in 5 seconds.  Have a nice day...\n",

Offline

#3 2014-02-27 22:16:15

Oldmoth
Member
Registered: 2013-01-25
Posts: 24

Re: [Solved] 3.13.5-1 Keymap problems

nope, the keyboard worked fine out of the box.

Offline

#4 2014-02-28 01:38:30

Oldmoth
Member
Registered: 2013-01-25
Posts: 24

Re: [Solved] 3.13.5-1 Keymap problems

Rolled back to 3,12.9-2 still have the problem.

Offline

#5 2014-02-28 07:53:24

Rexilion
Member
Registered: 2013-12-23
Posts: 784

Re: [Solved] 3.13.5-1 Keymap problems

Rolling back is not going to help. You have to rollback mkinitcpio for that. It's not a direct change in the kernel.

fs/super.c : "Self-destruct in 5 seconds.  Have a nice day...\n",

Offline

#6 2014-02-28 14:30:28

Next7
Member
Registered: 2011-12-07
Posts: 44

Re: [Solved] 3.13.5-1 Keymap problems

Try to add "keymap" hook to HOOKS part of mkinitcpio.conf.

Offline

#7 2014-02-28 22:35:25

Oldmoth
Member
Registered: 2013-01-25
Posts: 24

Re: [Solved] 3.13.5-1 Keymap problems

Added it, built it and rebooted. Didn't fix it.
Using the keymap viewing tool in Gnome it shows the right side of the letter keys being bound the the numpad, which doesn't exist. It seems more like a keyboard detection issue than key mapping. Is there a way to manually select a keyboard type?

Offline

#8 2014-03-01 05:36:03

Rexilion
Member
Registered: 2013-12-23
Posts: 784

Re: [Solved] 3.13.5-1 Keymap problems

Could you post your full dmesg?

fs/super.c : "Self-destruct in 5 seconds.  Have a nice day...\n",

Offline

#9 2014-03-02 01:33:09

Oldmoth
Member
Registered: 2013-01-25
Posts: 24

Re: [Solved] 3.13.5-1 Keymap problems

It is rather long...

Not sure how to make it shrinkable. Never mind, it scrolls.

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=af821837-dbd4-4a89-a62d-b58a0b018657 rw quiet libata.force=noncq
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca4bcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ca4bd000-0x00000000ca4c3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ca4c4000-0x00000000ca8e5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ca8e6000-0x00000000cac36fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cac37000-0x00000000da898fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da899000-0x00000000dab40fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dab41000-0x00000000dab55fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dab56000-0x00000000dbaaafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dbaab000-0x00000000dbf51fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbf52000-0x00000000dbffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xdab45000  ACPI 2.0=0xdab45000  SMBIOS=0xdbf50498 
[    0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
[    0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[    0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009e000) (0MB)
[    0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001061000) (15MB)
[    0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001061000-0x0000000002000000) (15MB)
[    0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f61000) (15MB)
[    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000002f61000-0x00000000379e0000) (842MB)
[    0.000000] efi: mem08: type=2, attr=0xf, range=[0x00000000379e0000-0x0000000037ce8000) (3MB)
[    0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037ce8000-0x000000009197a000) (1436MB)
[    0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000009197a000-0x00000000c7d54000) (867MB)
[    0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000c7d54000-0x00000000ca4a0000) (39MB)
[    0.000000] efi: mem12: type=1, attr=0xf, range=[0x00000000ca4a0000-0x00000000ca4bd000) (0MB)
[    0.000000] efi: mem13: type=10, attr=0xf, range=[0x00000000ca4bd000-0x00000000ca4c4000) (0MB)
[    0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000ca4c4000-0x00000000ca610000) (1MB)
[    0.000000] efi: mem15: type=3, attr=0xf, range=[0x00000000ca610000-0x00000000ca8a8000) (2MB)
[    0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000ca8a8000-0x00000000ca8c4000) (0MB)
[    0.000000] efi: mem17: type=3, attr=0xf, range=[0x00000000ca8c4000-0x00000000ca8de000) (0MB)
[    0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ca8de000-0x00000000ca8e6000) (0MB)
[    0.000000] efi: mem19: type=6, attr=0x800000000000000f, range=[0x00000000ca8e6000-0x00000000cabbe000) (2MB)
[    0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000cabbe000-0x00000000cac37000) (0MB)
[    0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000cac37000-0x00000000cac44000) (0MB)
[    0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000cac44000-0x00000000d8a9e000) (222MB)
[    0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000d8a9e000-0x00000000d8ac3000) (0MB)
[    0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000d8ac3000-0x00000000d8ad8000) (0MB)
[    0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000d8ad8000-0x00000000d9bf6000) (17MB)
[    0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000d9bf6000-0x00000000da64c000) (10MB)
[    0.000000] efi: mem27: type=2, attr=0xf, range=[0x00000000da64c000-0x00000000da656000) (0MB)
[    0.000000] efi: mem28: type=3, attr=0xf, range=[0x00000000da656000-0x00000000da899000) (2MB)
[    0.000000] efi: mem29: type=0, attr=0xf, range=[0x00000000da899000-0x00000000da9ab000) (1MB)
[    0.000000] efi: mem30: type=0, attr=0xf, range=[0x00000000da9ab000-0x00000000dab41000) (1MB)
[    0.000000] efi: mem31: type=9, attr=0xf, range=[0x00000000dab41000-0x00000000dab45000) (0MB)
[    0.000000] efi: mem32: type=9, attr=0xf, range=[0x00000000dab45000-0x00000000dab56000) (0MB)
[    0.000000] efi: mem33: type=10, attr=0xf, range=[0x00000000dab56000-0x00000000db20f000) (6MB)
[    0.000000] efi: mem34: type=10, attr=0xf, range=[0x00000000db20f000-0x00000000dbaab000) (8MB)
[    0.000000] efi: mem35: type=6, attr=0x800000000000000f, range=[0x00000000dbaab000-0x00000000dbe81000) (3MB)
[    0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000dbe81000-0x00000000dbf52000) (0MB)
[    0.000000] efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000dbf52000-0x00000000dbf96000) (0MB)
[    0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000dbf96000-0x00000000dbfff000) (0MB)
[    0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000dbfff000-0x00000000dc000000) (0MB)
[    0.000000] efi: mem40: type=7, attr=0xf, range=[0x0000000100000000-0x000000011fe00000) (510MB)
[    0.000000] efi: mem41: type=0, attr=0x0, range=[0x00000000dd000000-0x00000000df200000) (34MB)
[    0.000000] efi: mem42: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[    0.000000] efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[    0.000000] efi: mem45: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem47: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Sony Corporation SVP13213CGB/VAIO, BIOS R0280V7 07/11/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F00000000 write-back
[    0.000000]   1 base 0100000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 011FE00000 mask 7FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02b3f000, 0x02b3ffff] PGTABLE
[    0.000000] BRK [0x02b40000, 0x02b40fff] PGTABLE
[    0.000000] BRK [0x02b41000, 0x02b41fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[    0.000000]  [mem 0x11fc00000-0x11fdfffff] page 2M
[    0.000000] BRK [0x02b42000, 0x02b42fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[    0.000000]  [mem 0x11c000000-0x11fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xca4bcfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xca3fffff] page 2M
[    0.000000]  [mem 0xca400000-0xca4bcfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xca4c4000-0xca8e5fff]
[    0.000000]  [mem 0xca4c4000-0xca5fffff] page 4k
[    0.000000]  [mem 0xca600000-0xca7fffff] page 2M
[    0.000000]  [mem 0xca800000-0xca8e5fff] page 4k
[    0.000000] BRK [0x02b43000, 0x02b43fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcac37000-0xda898fff]
[    0.000000]  [mem 0xcac37000-0xcadfffff] page 4k
[    0.000000]  [mem 0xcae00000-0xda7fffff] page 2M
[    0.000000]  [mem 0xda800000-0xda898fff] page 4k
[    0.000000] BRK [0x02b44000, 0x02b44fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdbfff000-0xdbffffff]
[    0.000000]  [mem 0xdbfff000-0xdbffffff] page 4k
[    0.000000] RAMDISK: [mem 0x379e0000-0x37ce7fff]
[    0.000000] ACPI: RSDP 00000000dab45000 000024 (v02   Sony)
[    0.000000] ACPI: XSDT 00000000dab45098 0000AC (v01   Sony     VAIO 20130711 AMI  00010013)
[    0.000000] ACPI: FACP 00000000dab4fa20 00010C (v05   Sony     VAIO 20130711 MSFT 00010013)
[    0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
[    0.000000] ACPI: DSDT 00000000dab451d0 00A84F (v02   Sony     VAIO 20130711 INTL 20120711)
[    0.000000] ACPI: FACS 00000000dbaa9080 000040
[    0.000000] ACPI: APIC 00000000dab4fb30 000072 (v03   Sony     VAIO 20130711 MSFT 00010013)
[    0.000000] ACPI: FPDT 00000000dab4fba8 000044 (v01   Sony     VAIO 20130711 AMI  00010013)
[    0.000000] ACPI: MSDM 00000000dab4fbf0 000055 (v03   Sony     VAIO 20130711 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000dab4fc48 00003C (v01   Sony     VAIO 20130711 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000dab4fc88 000038 (v01   Sony     VAIO 20130711 MSFT 00000005)
[    0.000000] ACPI: SSDT 00000000dab4fcc0 000269 (v01   Sony     VAIO 20130711 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000dab4ff30 000379 (v01   Sony     VAIO 20130711 INTL 20120711)
[    0.000000] ACPI: PCCT 00000000dab502b0 00006E (v05   Sony     VAIO 20130711 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dab50320 000AC4 (v01   Sony     VAIO 20130711 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dab50de8 000473 (v01   Sony     VAIO 20130711 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000dab51260 000AD8 (v01   Sony     VAIO 20130711 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000dab51d38 0004FC (v01   Sony     VAIO 20130711 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000dab52238 003019 (v01   Sony     VAIO 20130711 INTL 20091112)
[    0.000000] ACPI: ECDT 00000000dab55258 0000C1 (v01   Sony     VAIO 20130711 MSFT 00000005)
[    0.000000] ACPI: BGRT 00000000dab55320 000038 (v00   Sony     VAIO 20130711 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000dab55358 0006F8 (v01   Sony     VAIO 20130711 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdf7000-0x11fdfbfff]
[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
[    0.000000]   node   0: [mem 0x00059000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xca4bcfff]
[    0.000000]   node   0: [mem 0xca4c4000-0xca8e5fff]
[    0.000000]   node   0: [mem 0xcac37000-0xda898fff]
[    0.000000]   node   0: [mem 0xdbfff000-0xdbffffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 1024734
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13910 pages used for memmap
[    0.000000]   DMA32 zone: 890178 pages, LIFO batch:31
[    0.000000]   Normal zone: 2040 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 56
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xca4bd000-0xca4c3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xca8e6000-0xcac36fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda899000-0xdab40fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdab41000-0xdab55fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdab56000-0xdbaaafff]
[    0.000000] PM: Registered nosave memory: [mem 0xdbaab000-0xdbf51fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdbf52000-0xdbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86336 r8192 d24256 u524288
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1008698
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=af821837-dbd4-4a89-a62d-b58a0b018657 rw quiet libata.force=noncq
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3927584K/4098936K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 171352K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:8448 nr_irqs:984 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2294.658 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.53 BogoMIPS (lpj=7648860)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000016] init_memory_mapping: [mem 0xca8e6000-0xcabbdfff]
[    0.000017]  [mem 0xca8e6000-0xcabbdfff] page 4k
[    0.000037] init_memory_mapping: [mem 0xdbaab000-0xdbf51fff]
[    0.000038]  [mem 0xdbaab000-0xdbbfffff] page 4k
[    0.000039]  [mem 0xdbc00000-0xdbdfffff] page 2M
[    0.000039]  [mem 0xdbe00000-0xdbf51fff] page 4k
[    0.000061] init_memory_mapping: [mem 0xdbf52000-0xdbffefff]
[    0.000062]  [mem 0xdbf52000-0xdbffefff] page 4k
[    0.009684] Security Framework initialized
[    0.009692] AppArmor: AppArmor disabled by boot time parameter
[    0.009693] Yama: becoming mindful.
[    0.009943] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010701] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011032] Mount-cache hash table entries: 256
[    0.011186] Initializing cgroup subsys memory
[    0.011192] Initializing cgroup subsys devices
[    0.011193] Initializing cgroup subsys freezer
[    0.011194] Initializing cgroup subsys net_cls
[    0.011196] Initializing cgroup subsys blkio
[    0.011217] CPU: Physical Processor ID: 0
[    0.011218] CPU: Processor Core ID: 0
[    0.011221] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.012209] mce: CPU supports 7 MCE banks
[    0.012221] CPU0: Thermal monitoring enabled (TM1)
[    0.012230] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[    0.012313] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
[    0.013082] ACPI: Core revision 20131115
[    0.021550] ACPI: All ACPI Tables successfully acquired
[    0.024343] ftrace: allocating 21057 entries in 83 pages
[    0.033378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.066363] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
[    0.066372] TSC deadline timer enabled
[    0.066380] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.066385] ... version:                3
[    0.066386] ... bit width:              48
[    0.066387] ... generic registers:      4
[    0.066388] ... value mask:             0000ffffffffffff
[    0.066389] ... max period:             0000ffffffffffff
[    0.066390] ... fixed-purpose events:   3
[    0.066391] ... event mask:             000000070000000f
[    0.093135] x86: Booting SMP configuration:
[    0.107407] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.093137] .... node  #0, CPUs:      #1 #2 #3
[    0.149264] x86: Booted up 1 node, 4 CPUs
[    0.149268] smpboot: Total of 4 processors activated (18364.15 BogoMIPS)
[    0.152799] devtmpfs: initialized
[    0.154545] PM: Registering ACPI NVS region [mem 0xca4bd000-0xca4c3fff] (28672 bytes)
[    0.154547] PM: Registering ACPI NVS region [mem 0xdab56000-0xdbaaafff] (16076800 bytes)
[    0.155396] RTC time:  1:24:17, date: 03/02/14
[    0.155426] NET: Registered protocol family 16
[    0.155505] cpuidle: using governor ladder
[    0.155506] cpuidle: using governor menu
[    0.155531] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.155532] ACPI: bus type PCI registered
[    0.155533] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.155579] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.155581] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.162646] PCI: Using configuration type 1 for base access
[    0.163126] bio: create slab <bio-0> at 0
[    0.163215] ACPI: Added _OSI(Module Device)
[    0.163217] ACPI: Added _OSI(Processor Device)
[    0.163218] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.163219] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164883] ACPI : EC: EC description table is found, configuring boot EC
[    0.207171] ACPI: Executed 1 blocks of module-level executable AML code
[    0.209213] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.209717] ACPI: SSDT 00000000dab35c18 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.210114] ACPI: Dynamic OEM Table Load:
[    0.210116] ACPI: SSDT           (null) 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.222993] ACPI: SSDT 00000000dab35618 0005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.223655] ACPI: Dynamic OEM Table Load:
[    0.223658] ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.236120] ACPI: SSDT 00000000dab34d98 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.236686] ACPI: Dynamic OEM Table Load:
[    0.236688] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.253366] ACPI: Interpreter enabled
[    0.253377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.253385] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.253407] ACPI: (supports S0 S3 S4 S5)
[    0.253409] ACPI: Using IOAPIC for interrupt routing
[    0.253444] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.253613] ACPI: No dock devices found.
[    0.321027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.321033] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.321246] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.321352] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.321969] PCI host bridge to bus 0000:00
[    0.321971] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.321973] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.321975] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.321976] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.321977] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.321979] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.321980] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.321981] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.321982] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.321984] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.321985] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.321986] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.321988] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[    0.321995] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.322170] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.322181] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
[    0.322188] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.322192] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.322360] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.322367] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
[    0.322551] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.322567] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.322620] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.322753] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.322784] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.322801] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c01f 64bit]
[    0.322855] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.323020] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.323031] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    0.323078] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.323210] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.323244] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[    0.323311] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.323447] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.323483] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[    0.323550] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.323686] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.323720] pci 0000:00:1c.4: [8086:9c1a] type 01 class 0x060400
[    0.323787] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.323922] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.323956] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.323975] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a3ff]
[    0.324057] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.324202] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.324233] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.324484] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.324497] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit]
[    0.324514] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.324774] pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000
[    0.324809] pci 0000:01:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[    0.324943] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.324987] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.331828] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.331834] pci 0000:00:1c.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.331915] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.331920] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.331923] pci 0000:00:1c.3:   bridge window [mem 0xf7200000-0xf7bfffff]
[    0.331930] pci 0000:00:1c.3:   bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
[    0.332071] pci 0000:03:00.0: [144d:a800] type 00 class 0x010601
[    0.332141] pci 0000:03:00.0: reg 0x24: [mem 0xf6810000-0xf6811fff]
[    0.332157] pci 0000:03:00.0: reg 0x30: [mem 0xf6800000-0xf680ffff pref]
[    0.332220] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.332254] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.338485] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.338489] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.338492] pci 0000:00:1c.4:   bridge window [mem 0xf6800000-0xf71fffff]
[    0.338498] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[    0.338533] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.359247] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.359306] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.359360] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.359417] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.359471] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.359527] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.359584] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.359638] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.360141] ACPI: Enabled 3 GPEs in block 00 to 7F
[    0.360149] ACPI: \_SB_.PCI0: notify handler is installed
[    0.360252] Found 1 acpi root devices
[    0.360444] ACPI : EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
[    0.360517] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.360520] vgaarb: loaded
[    0.360520] vgaarb: bridge control possible 0000:00:02.0
[    0.360548] PCI: Using ACPI for IRQ routing
[    0.361748] PCI: pci_cache_line_size set to 64 bytes
[    0.361782] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.361783] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.361784] e820: reserve RAM buffer [mem 0xca4bd000-0xcbffffff]
[    0.361789] e820: reserve RAM buffer [mem 0xca8e6000-0xcbffffff]
[    0.361790] e820: reserve RAM buffer [mem 0xda899000-0xdbffffff]
[    0.361792] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.361858] NetLabel: Initializing
[    0.361859] NetLabel:  domain hash size = 128
[    0.361860] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.361872] NetLabel:  unlabeled traffic allowed by default
[    0.361886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.361890] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.363906] Switched to clocksource hpet
[    0.367525] pnp: PnP ACPI init
[    0.367538] ACPI: bus type PNP registered
[    0.367637] pnp 00:00: [dma 4]
[    0.367656] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.367675] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.367747] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.367836] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.367838] system 00:03: [io  0x2008-0x200b] has been reserved
[    0.367840] system 00:03: [io  0xffff] has been reserved
[    0.367841] system 00:03: [io  0xffff] has been reserved
[    0.367842] system 00:03: [io  0x1c00-0x1cfe] has been reserved
[    0.367844] system 00:03: [io  0x1d00-0x1dfe] has been reserved
[    0.367845] system 00:03: [io  0x1e00-0x1efe] has been reserved
[    0.367847] system 00:03: [io  0x1f00-0x1ffe] has been reserved
[    0.367848] system 00:03: [io  0x1800-0x18fe] could not be reserved
[    0.367850] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.367852] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367874] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.367908] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.367910] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.367942] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.367944] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367971] pnp 00:07: Plug and Play ACPI device, IDs SNYa009 PNP030b (active)
[    0.368005] pnp 00:08: Plug and Play ACPI device, IDs FOX0015 PNP0f13 (active)
[    0.387790] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.387794] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.387796] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.387798] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.387801] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.387803] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.387805] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.387807] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.387809] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.387812] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.387814] system 00:09: [mem 0xf7fef000-0xf7feffff] has been reserved
[    0.387816] system 00:09: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[    0.387819] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.388072] pnp: PnP ACPI: found 10 devices
[    0.388074] ACPI: bus type PNP unregistered
[    0.394358] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.394361] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.394374] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.394375] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.394380] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf200000-0xdf3fffff 64bit pref]
[    0.394382] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.394384] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.394386] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.394390] pci 0000:00:1c.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.394393] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff 64bit pref]
[    0.394397] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.394399] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.394403] pci 0000:00:1c.3:   bridge window [mem 0xf7200000-0xf7bfffff]
[    0.394406] pci 0000:00:1c.3:   bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
[    0.394410] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.394412] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.394416] pci 0000:00:1c.4:   bridge window [mem 0xf6800000-0xf71fffff]
[    0.394419] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[    0.394424] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.394426] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.394427] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.394428] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.394430] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.394431] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.394432] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.394434] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.394435] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.394436] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.394438] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.394439] pci_bus 0000:00: resource 15 [mem 0xdf200000-0xfeafffff]
[    0.394441] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.394442] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.394443] pci_bus 0000:01: resource 2 [mem 0xdf200000-0xdf3fffff 64bit pref]
[    0.394445] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.394446] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf7bfffff]
[    0.394447] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf13fffff 64bit pref]
[    0.394449] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.394450] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
[    0.394452] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
[    0.394479] NET: Registered protocol family 2
[    0.394606] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.394670] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.394729] TCP: Hash tables configured (established 32768 bind 32768)
[    0.394745] TCP: reno registered
[    0.394752] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.394766] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.394811] NET: Registered protocol family 1
[    0.394820] pci 0000:00:02.0: Boot video device
[    0.395055] PCI: CLS 64 bytes, default 64
[    0.395090] Unpacking initramfs...
[    0.446681] Freeing initrd memory: 3104K (ffff8800379e0000 - ffff880037ce8000)
[    0.446685] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.446687] software IO TLB [mem 0xd4a9e000-0xd8a9e000] (64MB) mapped at [ffff8800d4a9e000-ffff8800d8a9dfff]
[    0.446817] Scanning for low memory corruption every 60 seconds
[    0.447027] audit: initializing netlink socket (disabled)
[    0.447035] type=2000 audit(1393723457.443:1): initialized
[    0.458588] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.459550] zbud: loaded
[    0.459686] VFS: Disk quotas dquot_6.5.2
[    0.459717] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.459838] msgmni has been set to 7724
[    0.459878] Key type big_key registered
[    0.460027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.460053] io scheduler noop registered
[    0.460055] io scheduler deadline registered
[    0.460077] io scheduler cfq registered (default)
[    0.460365] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.460378] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.460417] efifb: probing for efifb
[    0.461479] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90009880000, using 8128k, total 8128k
[    0.461480] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.461481] efifb: scrolling: redraw
[    0.461483] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.466321] Console: switching to colour frame buffer device 240x67
[    0.471097] fb0: EFI VGA frame buffer device
[    0.471103] intel_idle: MWAIT substates: 0x11142120
[    0.471105] intel_idle: v0.4 model 0x45
[    0.471106] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.471254] GHES: HEST is not enabled!
[    0.471291] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.471584] Linux agpgart interface v0.103
[    0.471628] rtc_cmos 00:04: RTC can wake from S4
[    0.471739] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.471766] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.471774] Intel P-state driver initializing.
[    0.471782] Intel pstate controlling: cpu 0
[    0.471793] Intel pstate controlling: cpu 1
[    0.471802] Intel pstate controlling: cpu 2
[    0.471815] Intel pstate controlling: cpu 3
[    0.471930] drop_monitor: Initializing network drop monitor service
[    0.471973] TCP: cubic registered
[    0.472042] NET: Registered protocol family 10
[    0.472157] NET: Registered protocol family 17
[    0.472163] Key type dns_resolver registered
[    0.472334] registered taskstats version 1
[    0.472718]   Magic number: 6:606:406
[    0.472779] rtc_cmos 00:04: setting system clock to 2014-03-02 01:24:17 UTC (1393723457)
[    0.472822] PM: Hibernation image not present or could not be loaded.
[    0.473475] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[    0.473476] Write protecting the kernel read-only data: 8192k
[    0.475421] Freeing unused kernel memory: 864K (ffff880002528000 - ffff880002600000)
[    0.476185] Freeing unused kernel memory: 376K (ffff8800027a2000 - ffff880002800000)
[    0.483994] systemd-udevd[58]: starting version 208
[    0.498053] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.499991] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.500007] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.503379] SCSI subsystem initialized
[    0.504070] ACPI: bus type USB registered
[    0.504091] usbcore: registered new interface driver usbfs
[    0.504106] usbcore: registered new interface driver hub
[    0.504203] usbcore: registered new device driver usb
[    0.504919] libata version 3.00 loaded.
[    0.505417] ahci 0000:03:00.0: version 3.0
[    0.505515] ahci 0000:03:00.0: irq 56 for MSI/MSI-X
[    0.505881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.505991] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.505999] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.506064] ehci-pci: EHCI PCI platform driver
[    0.506083] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.506100] xhci_hcd 0000:00:14.0: irq 57 for MSI/MSI-X
[    0.506703] hub 1-0:1.0: USB hub found
[    0.506717] hub 1-0:1.0: 9 ports detected
[    0.507703] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.507709] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.507899] hub 2-0:1.0: USB hub found
[    0.507907] hub 2-0:1.0: 4 ports detected
[    0.517178] ahci 0000:03:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.517182] ahci 0000:03:00.0: flags: 64bit ncq led clo only pio ccc 
[    0.517384] scsi0 : ahci
[    0.517461] ata1: SATA max UDMA/133 abar m8192@0xf6810000 port 0xf6810100 irq 56
[    0.524457] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.524468] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.524485] ehci-pci 0000:00:1d.0: debug port 2
[    0.528376] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.528389] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1a000
[    0.531406] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.537226] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.537491] hub 3-0:1.0: USB hub found
[    0.537499] hub 3-0:1.0: 2 ports detected
[    0.564569] pci_bus 0000:01: Allocating resources
[    0.564588] pci_bus 0000:02: Allocating resources
[    0.564599] pci_bus 0000:03: Allocating resources
[    0.564612] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    0.564621] pci 0000:00:00.0: no hotplug settings from platform
[    0.564623] pci 0000:00:00.0: using default PCI settings
[    0.564629] pci 0000:00:02.0: no hotplug settings from platform
[    0.564631] pci 0000:00:02.0: using default PCI settings
[    0.564636] pci 0000:00:03.0: no hotplug settings from platform
[    0.564640] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[    0.564642] xhci_hcd 0000:00:14.0: using default PCI settings
[    0.564650] pci 0000:00:16.0: no hotplug settings from platform
[    0.564651] pci 0000:00:16.0: using default PCI settings
[    0.564658] pci 0000:00:1b.0: no hotplug settings from platform
[    0.564662] pcieport 0000:00:1c.0: no hotplug settings from platform
[    0.564671] pci 0000:01:00.0: no hotplug settings from platform
[    0.564675] pcieport 0000:00:1c.3: no hotplug settings from platform
[    0.564678] pcieport 0000:00:1c.4: no hotplug settings from platform
[    0.564686] ahci 0000:03:00.0: no hotplug settings from platform
[    0.564689] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[    0.564691] ehci-pci 0000:00:1d.0: using default PCI settings
[    0.564699] pci 0000:00:1f.0: no hotplug settings from platform
[    0.564701] pci 0000:00:1f.0: using default PCI settings
[    0.564710] pci 0000:00:1f.3: no hotplug settings from platform
[    0.564712] pci 0000:00:1f.3: using default PCI settings
[    0.843738] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.843913] ata1.00: FORCE: horkage modified (noncq)
[    0.843982] ata1.00: ATA-9: SAMSUNG MZHPU128HCGM-00000, UXM6401Q, max UDMA/133
[    0.843985] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (not used)
[    0.849245] ata1.00: configured for UDMA/133
[    0.849436] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZHPU128 UXM6 PQ: 0 ANSI: 5
[    0.851122] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    0.851400] sd 0:0:0:0: [sda] Write Protect is off
[    0.851404] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.851463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.852979]  sda: sda1 sda2
[    0.853648] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.867018] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    0.886194] hidraw: raw HID events driver (C) Jiri Kosina
[    0.893113] usbcore: registered new interface driver usbhid
[    0.893116] usbhid: USB HID core driver
[    0.896156] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[    0.899083] input: Logitech Unifying Device. Wireless PID:400d as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/input/input2
[    0.899142] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400d] on usb-0000:00:14.0-1:2
[    1.043579] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    1.045028] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.096217] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    1.096610] systemd[1]: Set hostname to <sam-laptop>.
[    1.097588] random: systemd urandom read with 34 bits of entropy available
[    1.151423] systemd[1]: Starting Login Prompts.
[    1.151442] systemd[1]: Reached target Login Prompts.
[    1.151455] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    1.151514] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.151524] systemd[1]: Starting Remote File Systems.
[    1.151533] systemd[1]: Reached target Remote File Systems.
[    1.151542] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    1.151568] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.151576] systemd[1]: Starting Delayed Shutdown Socket.
[    1.151598] systemd[1]: Listening on Delayed Shutdown Socket.
[    1.151607] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    1.151622] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.151633] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    1.151661] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.151669] systemd[1]: Starting Paths.
[    1.151678] systemd[1]: Reached target Paths.
[    1.151686] systemd[1]: Starting LVM2 metadata daemon socket.
[    1.151707] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.151717] systemd[1]: Starting Journal Socket.
[    1.151753] systemd[1]: Listening on Journal Socket.
[    1.152067] systemd[1]: Starting Apply Kernel Variables...
[    1.152559] systemd[1]: Mounting Huge Pages File System...
[    1.152866] systemd[1]: Starting Setup Virtual Console...
[    1.153418] systemd[1]: Mounting POSIX Message Queue File System...
[    1.155781] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    1.156482] systemd[1]: Started Load Kernel Modules.
[    1.156509] systemd[1]: Mounting Configuration File System...
[    1.156794] systemd[1]: Mounted FUSE Control File System.
[    1.156827] systemd[1]: Starting Journal Service...
[    1.157200] systemd[1]: Started Journal Service.
[    1.214372] systemd-journald[116]: Vacuuming done, freed 0 bytes
[    1.216800] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    1.251984] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    1.259226] systemd-udevd[144]: starting version 208
[    1.312099] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[    1.313373] ACPI: AC Adapter [ADP1] (off-line)
[    1.327228] sony_laptop: Sony Notebook Control Driver v0.6
[    1.327341] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input3
[    1.327402] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input4
[    1.327912] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[    1.331165] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[    1.331173] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.335589] [drm] Initialized drm 1.1.0 20060810
[    1.338163] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[    1.344172] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[    1.344178] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.344181] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    1.344183] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    1.344185] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.344186] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    1.344188] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    1.344190] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.344191] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.351335] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[    1.356881] thermal LNXTHERM:00: registered as thermal_zone0
[    1.356883] ACPI: Thermal Zone [TZ00] (39 C)
[    1.357032] ACPI: Lid Switch [LID0]
[    1.357092] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[    1.357133] ACPI: Power Button [PWRB]
[    1.358000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.359698] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    1.366710] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.371880] cfg80211: Calling CRDA to update world regulatory domain
[    1.378008] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    1.378010] Copyright(c) 2003-2013 Intel Corporation
[    1.378038] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[    1.378186] iwlwifi 0000:01:00.0: irq 59 for MSI/MSI-X
[    1.383292] iwlwifi 0000:01:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm
[    1.387785] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    1.387890] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    1.387979] snd_hda_intel 0000:00:1b.0: irq 60 for MSI/MSI-X
[    1.399549] microcode: CPU0 sig=0x40651, pf=0x40, revision=0xa
[    1.399568] platform microcode: Direct firmware load failed with error -2
[    1.399570] platform microcode: Falling back to user helper
[    1.405139] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    1.405165] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[    1.405217] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[    1.405435] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[    1.419816] [drm] Memory usable by graphics device = 2048M
[    1.419821] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    1.419824] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    1.419839] Console: switching to colour dummy device 80x25
[    1.425698] mousedev: PS/2 mouse device common for all mice
[    1.431669] iTCO_vendor_support: vendor-support=0
[    1.432350] nfc: nfc_init: NFC Core ver 0.1
[    1.432372] NET: Registered protocol family 39
[    1.434509] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    1.434542] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    1.434988] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.439010] Probing NFC pn544
[    1.444200] microcode: CPU1 sig=0x40651, pf=0x40, revision=0xa
[    1.444218] platform microcode: Direct firmware load failed with error -2
[    1.444222] platform microcode: Falling back to user helper
[    1.446653] tsc: Refined TSC clocksource calibration: 2294.688 MHz
[    1.450537] microcode: CPU2 sig=0x40651, pf=0x40, revision=0xa
[    1.450549] platform microcode: Direct firmware load failed with error -2
[    1.450551] platform microcode: Falling back to user helper
[    1.451614] microcode: CPU3 sig=0x40651, pf=0x40, revision=0xa
[    1.451630] platform microcode: Direct firmware load failed with error -2
[    1.451634] platform microcode: Falling back to user helper
[    1.452143] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.470408] ACPI: Battery Slot [BAT0] (battery present)
[    1.474081] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    1.479806] input: eGalax Inc. eGalaxTouch EXC7910-1031-12.00.03 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input10
[    1.480758] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[    1.480767] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.480768] [drm] Driver supports precise vblank timestamp query.
[    1.480829] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.481385] ACPI: Battery Slot [BAT1] (battery absent)
[    1.481984] systemd-journald[116]: Received request to flush runtime journal from PID 1
[    1.482004] hid-multitouch 0003:0EEF:A108.0005: input,hiddev0,hidraw2: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC7910-1031-12.00.03] on usb-0000:00:14.0-3/input0
[    1.490589] hub 3-1:1.0: USB hub found
[    1.490643] hub 3-1:1.0: 8 ports detected
[    1.494969] media: Linux media interface: v0.10
[    1.499524] systemd-journald[116]: File /var/log/journal/59ac8d341d344e9285e4f0f2eca5bc98/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    1.503489] Linux video capture interface: v2.00
[    1.517436] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b3be)
[    1.520564] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
[    1.520640] usbcore: registered new interface driver uvcvideo
[    1.520642] USB Video Class driver (1.1.1)
[    1.533631] kvm: disabled by bios
[    1.549377] fbcon: inteldrmfb (fb0) is primary device
[    1.596422] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    1.624349] systemd-udevd[148]: renamed network interface wlan0 to wlp1s0
[    1.712079] intel_rapl: domain uncore energy ctr 6673:6673 not working, skip
[    1.756203] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2699, fw id: 1401224
[    1.756637] usb 3-1.6: new full-speed USB device number 3 using ehci-pci
[    1.789681] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    2.446252] Switched to clocksource tsc
[    3.329033] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.488890] Console: switching to colour frame buffer device 240x67
[    3.495342] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.495343] i915 0000:00:02.0: registered panic notifier
[    3.513317] Bluetooth: Core ver 2.17
[    3.513342] NET: Registered protocol family 31
[    3.513343] Bluetooth: HCI device and connection manager initialized
[    3.513359] Bluetooth: HCI socket layer initialized
[    3.513361] Bluetooth: L2CAP socket layer initialized
[    3.513364] Bluetooth: SCO socket layer initialized
[    3.521281] usbcore: registered new interface driver btusb
[    3.521831] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.525380] acpi device:29: registered as cooling_device5
[    3.525448] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[    3.525550] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.532209] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[    3.535031] Bluetooth: hci0: read Intel version: 370710018002030d00
[    3.535501] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[    3.542688] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[    3.542909] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[    3.551325] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    3.551420] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    3.551500] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    3.553866] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    3.665595] random: nonblocking pool is initialized
[    3.694943] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    4.164669] type=1006 audit(1393723461.187:2): pid=350 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
[    4.180905] systemd-journald[116]: File /var/log/journal/59ac8d341d344e9285e4f0f2eca5bc98/user-120.journal corrupted or uncleanly shut down, renaming and replacing.
[    7.413969] wlp1s0: authenticate with e0:46:9a:0c:a5:21
[    7.416259] wlp1s0: send auth to e0:46:9a:0c:a5:21 (try 1/3)
[    7.418109] wlp1s0: authenticated
[    7.419997] wlp1s0: associate with e0:46:9a:0c:a5:21 (try 1/3)
[    7.423776] wlp1s0: RX AssocResp from e0:46:9a:0c:a5:21 (capab=0x411 status=0 aid=7)
[    7.424701] wlp1s0: associated
[    7.424739] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[   11.931685] type=1006 audit(1393723468.961:3): pid=477 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[   11.942575] type=1006 audit(1393723468.971:4): pid=482 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=3 res=1
[   11.973899] systemd-journald[116]: File /var/log/journal/59ac8d341d344e9285e4f0f2eca5bc98/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   12.473771] fuse init (API version 7.22)
[  139.919859] cfg80211: Calling CRDA to update world regulatory domain
[  143.644785] wlp1s0: authenticate with e0:46:9a:0c:a5:21
[  143.646447] wlp1s0: send auth to e0:46:9a:0c:a5:21 (try 1/3)
[  143.709204] wlp1s0: send auth to e0:46:9a:0c:a5:21 (try 2/3)
[  143.841588] wlp1s0: send auth to e0:46:9a:0c:a5:21 (try 3/3)
[  143.904910] wlp1s0: authentication with e0:46:9a:0c:a5:21 timed out
[  217.540867] wlp1s0: authenticate with e0:46:9a:0c:a5:21
[  217.542503] wlp1s0: send auth to e0:46:9a:0c:a5:21 (try 1/3)
[  217.544279] wlp1s0: authenticated
[  217.546419] wlp1s0: associate with e0:46:9a:0c:a5:21 (try 1/3)
[  217.552420] wlp1s0: RX AssocResp from e0:46:9a:0c:a5:21 (capab=0x411 status=0 aid=9)
[  217.554172] wlp1s0: associated

Last edited by Oldmoth (2014-03-02 01:35:10)

Offline

#10 2014-03-02 04:10:36

Oldmoth
Member
Registered: 2013-01-25
Posts: 24

Re: [Solved] 3.13.5-1 Keymap problems

FIXED

Booted into the most recent live CD - Keyboard worked fine
Rebooted into system and the keyboard was working again, not sure why. Would like to know if anyone does.

Thanks for your help and suggestions.

Offline

#11 2014-03-02 06:40:49

Rexilion
Member
Registered: 2013-12-23
Posts: 784

Re: [Solved] 3.13.5-1 Keymap problems

Maybe it remembers it scroll-lock settings? Some keyboards can use scroll-lock (or something like that) for it.

fs/super.c : "Self-destruct in 5 seconds.  Have a nice day...\n",

Offline

Pages: 1

Board footer

Powered by FluxBB