You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2014-03-08 18:08:58
- adomas
- Member
- From: Berlin, Germany
- Registered: 2011-01-05
- Posts: 43
Slow graphics on Intel Atom N550
Computer is Netbook by Samsung model NC110/210
CPU: Intel Atom N550
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU N550 @ 1.50GHz
stepping : 10
microcode : 0x107
cpu MHz : 1000.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm
bogomips : 2993.43
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU N550 @ 1.50GHz
stepping : 10
microcode : 0x107
cpu MHz : 1000.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm
bogomips : 2993.43
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU N550 @ 1.50GHz
stepping : 10
microcode : 0x107
cpu MHz : 1000.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm
bogomips : 2993.43
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU N550 @ 1.50GHz
stepping : 10
microcode : 0x107
cpu MHz : 1000.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm
bogomips : 2993.43
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 48 bits virtual
power management:This CPU has integrated graphics. I use this config: /etc/Xorg/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "uxa"
EndSectionNow the problem is that 2D acceleration is very slow. I even can't play videos. It seems that it uses Mesa drivers as libgl says it can't load "i915"... Here is glxinfo:
name of display: :0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_create_context, GLX_ARB_create_context_profile,
GLX_ARB_fbconfig_float, GLX_ARB_framebuffer_sRGB, GLX_ARB_multisample,
GLX_EXT_create_context_es2_profile, GLX_EXT_framebuffer_sRGB,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_SGI_swap_control
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_create_context, GLX_ARB_create_context_profile,
GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float,
GLX_ARB_framebuffer_sRGB, GLX_ARB_get_proc_address, GLX_ARB_multisample,
GLX_EXT_create_context_es2_profile, GLX_EXT_fbconfig_packed_float,
GLX_EXT_framebuffer_sRGB, GLX_EXT_import_context,
GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_SGI_make_current_read,
GLX_SGI_swap_control, GLX_SGI_video_sync
GLX version: 1.4
GLX extensions:
GLX_ARB_create_context, GLX_ARB_create_context_profile,
GLX_ARB_fbconfig_float, GLX_ARB_framebuffer_sRGB,
GLX_ARB_get_proc_address, GLX_ARB_multisample,
GLX_EXT_create_context_es2_profile, GLX_EXT_framebuffer_sRGB,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_MESA_multithread_makecurrent,
GLX_OML_swap_method, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_SGI_make_current_read
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
OpenGL version string: 2.1 Mesa 10.0.3
OpenGL shading language version string: 1.30
OpenGL extensions:
GL_AMD_conservative_depth, GL_AMD_draw_buffers_blend,
GL_AMD_seamless_cubemap_per_texture, GL_ANGLE_texture_compression_dxt3,
GL_ANGLE_texture_compression_dxt5, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_ARB_ES2_compatibility,
GL_ARB_blend_func_extended, GL_ARB_color_buffer_float,
GL_ARB_conservative_depth, GL_ARB_copy_buffer, GL_ARB_debug_output,
GL_ARB_depth_buffer_float, GL_ARB_depth_clamp, GL_ARB_depth_texture,
GL_ARB_draw_buffers, GL_ARB_draw_buffers_blend,
GL_ARB_draw_elements_base_vertex, GL_ARB_draw_instanced,
GL_ARB_explicit_attrib_location, GL_ARB_fragment_coord_conventions,
GL_ARB_fragment_program, GL_ARB_fragment_program_shadow,
GL_ARB_fragment_shader, GL_ARB_framebuffer_object,
GL_ARB_framebuffer_sRGB, GL_ARB_get_program_binary,
GL_ARB_half_float_pixel, GL_ARB_half_float_vertex,
GL_ARB_instanced_arrays, GL_ARB_internalformat_query,
GL_ARB_invalidate_subdata, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_occlusion_query2,
GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite,
GL_ARB_provoking_vertex, GL_ARB_robustness, GL_ARB_sampler_objects,
GL_ARB_seamless_cube_map, GL_ARB_shader_bit_encoding,
GL_ARB_shader_objects, GL_ARB_shader_texture_lod,
GL_ARB_shading_language_100, GL_ARB_shading_language_420pack,
GL_ARB_shading_language_packing, GL_ARB_shadow, GL_ARB_sync,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_compression_rgtc, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_float, GL_ARB_texture_mirror_clamp_to_edge,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_texture_rg, GL_ARB_texture_rgb10_a2ui,
GL_ARB_texture_storage, GL_ARB_texture_swizzle, GL_ARB_timer_query,
GL_ARB_transform_feedback2, GL_ARB_transform_feedback3,
GL_ARB_transform_feedback_instanced, GL_ARB_transpose_matrix,
GL_ARB_uniform_buffer_object, GL_ARB_vertex_array_bgra,
GL_ARB_vertex_array_object, GL_ARB_vertex_attrib_binding,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_vertex_type_10f_11f_11f_rev, GL_ARB_vertex_type_2_10_10_10_rev,
GL_ARB_window_pos, GL_ATI_blend_equation_separate, GL_ATI_draw_buffers,
GL_ATI_separate_stencil, GL_ATI_texture_compression_3dc,
GL_ATI_texture_env_combine3, GL_ATI_texture_float,
GL_ATI_texture_mirror_once, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array,
GL_EXT_copy_texture, GL_EXT_draw_buffers2, GL_EXT_draw_instanced,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_framebuffer_sRGB,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_float, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_array, GL_EXT_texture_compression_dxt1,
GL_EXT_texture_compression_latc, GL_EXT_texture_compression_rgtc,
GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_integer, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_texture_sRGB, GL_EXT_texture_sRGB_decode,
GL_EXT_texture_shared_exponent, GL_EXT_texture_snorm,
GL_EXT_texture_swizzle, GL_EXT_timer_query, GL_EXT_transform_feedback,
GL_EXT_vertex_array, GL_EXT_vertex_array_bgra,
GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_KHR_debug,
GL_MESA_pack_invert, GL_MESA_texture_array, GL_MESA_texture_signed_rgba,
GL_MESA_window_pos, GL_MESA_ycbcr_texture, GL_NV_blend_square,
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_fog_distance,
GL_NV_light_max_exponent, GL_NV_packed_depth_stencil,
GL_NV_primitive_restart, GL_NV_texgen_reflection,
GL_NV_texture_env_combine4, GL_NV_texture_rectangle, GL_NV_vdpau_interop,
GL_OES_EGL_image, GL_OES_read_format, GL_S3_s3tc,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
12 GLX Visuals
visual x bf lv rg d st colorbuffer sr ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a F gb bf th cl r g b a ns b eat
----------------------------------------------------------------------------
[...]
24 GLXFBConfigs:
visual x bf lv rg d st colorbuffer sr ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a F gb bf th cl r g b a ns b eat
----------------------------------------------------------------------------
[...]When running glxinfo I always get:
libGL error: failed to load driver: i915
libGL error: Try again with LIBGL_DEBUG=verbose for more details.How to make graphics work normally? I installed Arch Linux on this netbook today on x86_64
Offline
#2 2014-03-08 18:41:37
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: Slow graphics on Intel Atom N550
Offline
#3 2014-03-08 18:43:46
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,426
- Website
Re: Slow graphics on Intel Atom N550
Moving to Multimedia...
Offline
#4 2014-03-08 18:52:28
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,607
Re: Slow graphics on Intel Atom N550
karol wrote:
The N550 isn't Poulsbo, it's Pineview. The Pineview GPU, also called GMA3150, is a genuine Intel thing. It's supported by i915 and xf86-video-intel and intel-dri.
@adomas: I don't know what you did, cos the thing is, it should work by doing... nothing. Well, you do need to install xf86-video-intel, but that should be kinda obvious. Post the output of dmesg.
Offline
#5 2014-03-09 11:21:07
- adomas
- Member
- From: Berlin, Germany
- Registered: 2011-01-05
- Posts: 43
Re: Slow graphics on Intel Atom N550
@Gusar I have installed xf86-video-intel and intel-dri when I was installing the system. I don't understand what could be the problem. dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c99675fe-cdac-4f3d-ae0c-1d8f75d3bdb4 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f5affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f5b0000-0x000000003f5bffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f5c0000-0x000000003f5c2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f5c3000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. NC210/NC110 /NC210/NC110 , BIOS 00VG.M000.20110105.RHU 01/05/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3f5b0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F600000 mask 0FFE00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f7d90-0x000f7d9f] mapped at [ffff8800000f7d90]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3f200000-0x3f3fffff]
[ 0.000000] [mem 0x3f200000-0x3f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x3c000000-0x3f1fffff]
[ 0.000000] [mem 0x3c000000-0x3f1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x3f400000-0x3f5affff]
[ 0.000000] [mem 0x3f400000-0x3f5affff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37a0c000-0x37cfdfff]
[ 0.000000] ACPI: RSDP 00000000000f7d60 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003f5b808d 00007C (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003f5bfc76 0000F4 (v03 INTEL 06040000 PTL 00000002)
[ 0.000000] ACPI: DSDT 000000003f5b9bfa 005F88 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003f5c2fc0 000040
[ 0.000000] ACPI: MCFG 000000003f5bfd6a 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003f5bfda6 000038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000003f5bfdde 000084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003f5bfe62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 000000003f5bfe8a 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 000000003f5b8cc7 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5b8c21 0000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5b8b7b 0000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5b8ad5 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5b8109 0009CC (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003f5affff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3f5affff]
[ 0.000000] NODE_DATA [mem 0x3f5ab000-0x3f5affff]
[ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003dc00000-ffff88003ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x3f5affff]
[ 0.000000] On node 0 totalpages: 259404
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3991 pages used for memmap
[ 0.000000] DMA32 zone: 255408 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88003f200000 s86336 r8192 d24256 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255328
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c99675fe-cdac-4f3d-ae0c-1d8f75d3bdb4 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1005856K/1037616K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 31760K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1496.415 MHz processor
[ 0.003341] Calibrating delay loop (skipped), value calculated using timer frequency.. 2994.53 BogoMIPS (lpj=4988050)
[ 0.003351] pid_max: default: 32768 minimum: 301
[ 0.003451] Security Framework initialized
[ 0.003471] AppArmor: AppArmor disabled by boot time parameter
[ 0.003475] Yama: becoming mindful.
[ 0.003751] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004802] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.005299] Mount-cache hash table entries: 256
[ 0.006908] Initializing cgroup subsys memory
[ 0.006931] Initializing cgroup subsys devices
[ 0.006938] Initializing cgroup subsys freezer
[ 0.006945] Initializing cgroup subsys net_cls
[ 0.006950] Initializing cgroup subsys blkio
[ 0.007015] CPU: Physical Processor ID: 0
[ 0.007021] CPU: Processor Core ID: 0
[ 0.007026] mce: CPU supports 5 MCE banks
[ 0.007040] CPU0: Thermal monitoring handled by SMI
[ 0.007056] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift: 6
[ 0.007242] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
[ 0.009172] ACPI: Core revision 20131115
[ 0.019618] ACPI: All ACPI Tables successfully acquired
[ 0.020027] ftrace: allocating 21060 entries in 83 pages
[ 0.040699] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077441] smpboot: CPU0: Intel(R) Atom(TM) CPU N550 @ 1.50GHz (fam: 06, model: 1c, stepping: 0a)
[ 0.079999] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.079999] ... version: 3
[ 0.079999] ... bit width: 40
[ 0.079999] ... generic registers: 2
[ 0.079999] ... value mask: 000000ffffffffff
[ 0.079999] ... max period: 000000007fffffff
[ 0.079999] ... fixed-purpose events: 3
[ 0.079999] ... event mask: 0000000700000003
[ 0.103577] x86: Booting SMP configuration:
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.103587] .... node #0, CPUs: #1
[ 0.116666] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.116666] Measured 144 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.116666] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.116963] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.006666] CPU0: Thermal monitoring enabled (TM1)
[ 0.123573] #2 #3
[ 0.148133] x86: Booted up 1 node, 4 CPUs
[ 0.148142] smpboot: Total of 4 processors activated (11976.12 BogoMIPS)
[ 0.150365] devtmpfs: initialized
[ 0.159699] PM: Registering ACPI NVS region [mem 0x3f5c0000-0x3f5c2fff] (12288 bytes)
[ 0.163050] RTC time: 13:08:55, date: 03/09/14
[ 0.163195] NET: Registered protocol family 16
[ 0.163604] cpuidle: using governor ladder
[ 0.163611] cpuidle: using governor menu
[ 0.163702] ACPI: bus type PCI registered
[ 0.163710] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.163894] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
[ 0.163902] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[ 0.165576] PCI: Using configuration type 1 for base access
[ 0.165978] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.165983] mtrr: probably your BIOS does not setup all CPUs.
[ 0.165987] mtrr: corrected configuration.
[ 0.167366] bio: create slab <bio-0> at 0
[ 0.167366] ACPI: Added _OSI(Module Device)
[ 0.167366] ACPI: Added _OSI(Processor Device)
[ 0.167366] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.167366] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.180883] ACPI: SSDT 000000003f5b97bd 0001C1 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.181480] ACPI: Dynamic OEM Table Load:
[ 0.181488] ACPI: SSDT (null) 0001C1 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.181846] ACPI: SSDT 000000003f5b8f26 000708 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.182395] ACPI: Dynamic OEM Table Load:
[ 0.182402] ACPI: SSDT (null) 000708 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.183350] ACPI: SSDT 000000003f5b997e 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.183925] ACPI: Dynamic OEM Table Load:
[ 0.183932] ACPI: SSDT (null) 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.184141] ACPI: SSDT 000000003f5b962e 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.184684] ACPI: Dynamic OEM Table Load:
[ 0.184691] ACPI: SSDT (null) 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.185327] ACPI: SSDT 000000003f5b9a52 0000D4 (v02 PmRef Cpu2Ist 00003000 INTL 20050624)
[ 0.185894] ACPI: Dynamic OEM Table Load:
[ 0.185901] ACPI: SSDT (null) 0000D4 (v02 PmRef Cpu2Ist 00003000 INTL 20050624)
[ 0.186108] ACPI: SSDT 000000003f5b96b3 000085 (v02 PmRef Cpu2Cst 00003000 INTL 20050624)
[ 0.186654] ACPI: Dynamic OEM Table Load:
[ 0.186676] ACPI: SSDT (null) 000085 (v02 PmRef Cpu2Cst 00003000 INTL 20050624)
[ 0.187309] ACPI: SSDT 000000003f5b9b26 0000D4 (v02 PmRef Cpu3Ist 00003000 INTL 20050624)
[ 0.187879] ACPI: Dynamic OEM Table Load:
[ 0.187887] ACPI: SSDT (null) 0000D4 (v02 PmRef Cpu3Ist 00003000 INTL 20050624)
[ 0.188712] ACPI: SSDT 000000003f5b9738 000085 (v02 PmRef Cpu3Cst 00003000 INTL 20050624)
[ 0.189261] ACPI: Dynamic OEM Table Load:
[ 0.189268] ACPI: SSDT (null) 000085 (v02 PmRef Cpu3Cst 00003000 INTL 20050624)
[ 0.190875] ACPI: Interpreter enabled
[ 0.190911] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.190928] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.190987] ACPI: (supports S0 S3 S4 S5)
[ 0.190995] ACPI: Using IOAPIC for interrupt routing
[ 0.191138] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.191623] ACPI: No dock devices found.
[ 0.214561] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.214590] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.214841] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[ 0.214864] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1988), AE_ALREADY_EXISTS (20131115/psparse-536)
[ 0.214892] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.214917] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.219636] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-10] only partially covers this bridge
[ 0.220246] PCI host bridge to bus 0000:00
[ 0.220262] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.220273] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.220284] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.220294] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.220304] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.220314] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.220325] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.220335] pci_bus 0000:00: root bus resource [mem 0x40000000-0xf7ffffff]
[ 0.220345] pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff]
[ 0.220379] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[ 0.220688] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[ 0.220718] pci 0000:00:02.0: reg 0x10: [mem 0xf0200000-0xf027ffff]
[ 0.220735] pci 0000:00:02.0: reg 0x14: [io 0x18d0-0x18d7]
[ 0.220752] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.220768] pci 0000:00:02.0: reg 0x1c: [mem 0xf0000000-0xf00fffff]
[ 0.221069] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[ 0.221094] pci 0000:00:02.1: reg 0x10: [mem 0xf0280000-0xf02fffff]
[ 0.221472] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.221515] pci 0000:00:1b.0: reg 0x10: [mem 0xf0300000-0xf0303fff 64bit]
[ 0.221667] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.221956] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.222117] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.222290] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.222448] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.222596] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.222766] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.222924] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.223083] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.223262] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.223447] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.223596] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.223769] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.223935] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.224021] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.224317] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.224403] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.224706] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.224792] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.225087] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.225181] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
[ 0.225492] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.225536] pci 0000:00:1d.7: reg 0x10: [mem 0xf0504000-0xf05043ff]
[ 0.225691] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.225980] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.226239] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.226397] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.226526] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.226858] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.226901] pci 0000:00:1f.2: reg 0x10: [io 0x18e8-0x18ef]
[ 0.226925] pci 0000:00:1f.2: reg 0x14: [io 0x18dc-0x18df]
[ 0.226949] pci 0000:00:1f.2: reg 0x18: [io 0x18e0-0x18e7]
[ 0.226971] pci 0000:00:1f.2: reg 0x1c: [io 0x18d8-0x18db]
[ 0.226995] pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18cf]
[ 0.227018] pci 0000:00:1f.2: reg 0x24: [mem 0xf0504400-0xf05047ff]
[ 0.227117] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.227414] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.227503] pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf]
[ 0.228119] pci 0000:05:00.0: [14e4:4727] type 00 class 0x028000
[ 0.228172] pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf0103fff 64bit]
[ 0.228392] pci 0000:05:00.0: supports D1 D2
[ 0.228402] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.236750] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.236771] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.237039] pci 0000:00:1c.1: PCI bridge to [bus 07]
[ 0.237055] pci 0000:00:1c.1: bridge window [io 0x0000-0x0fff]
[ 0.237351] pci 0000:09:00.0: [10ec:8136] type 00 class 0x020000
[ 0.237393] pci 0000:09:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.237448] pci 0000:09:00.0: reg 0x18: [mem 0xf050c000-0xf050cfff 64bit pref]
[ 0.237486] pci 0000:09:00.0: reg 0x20: [mem 0xf0508000-0xf050bfff 64bit pref]
[ 0.237623] pci 0000:09:00.0: supports D1 D2
[ 0.237633] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.246713] pci 0000:00:1c.2: PCI bridge to [bus 09]
[ 0.246729] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.246752] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.246998] pci 0000:00:1c.3: PCI bridge to [bus 0b]
[ 0.247014] pci 0000:00:1c.3: bridge window [io 0x0000-0x0fff]
[ 0.247235] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode)
[ 0.247263] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.247274] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.247284] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.247294] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.247304] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.247314] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.247324] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
[ 0.247335] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
[ 0.250109] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.250291] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.250468] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.250643] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.250828] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.251015] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.251201] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.251385] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.253732] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.253758] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.254225] Found 1 acpi root devices
[ 0.254373] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.254595] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.254595] vgaarb: loaded
[ 0.254595] vgaarb: bridge control possible 0000:00:02.0
[ 0.254595] PCI: Using ACPI for IRQ routing
[ 0.254595] PCI: pci_cache_line_size set to 64 bytes
[ 0.254595] pci 0000:00:1d.7: address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:09 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.254595] pci 0000:00:1f.2: address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:09 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.254595] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.254595] e820: reserve RAM buffer [mem 0x3f5b0000-0x3fffffff]
[ 0.254595] NetLabel: Initializing
[ 0.254595] NetLabel: domain hash size = 128
[ 0.254595] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.254595] NetLabel: unlabeled traffic allowed by default
[ 0.254595] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.254595] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.254595] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.257738] Switched to clocksource hpet
[ 0.272752] pnp: PnP ACPI init
[ 0.272805] ACPI: bus type PNP registered
[ 0.273765] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.273777] system 00:00: [io 0x1000-0x107f] could not be reserved
[ 0.273784] system 00:00: [io 0x1180-0x11bf] has been reserved
[ 0.273792] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.273799] system 00:00: [io 0xfe00] has been reserved
[ 0.273807] system 00:00: [io 0x164e-0x174c] has been reserved
[ 0.273816] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.273824] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.273831] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.273839] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.273851] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.273889] pnp 00:01: [dma 4]
[ 0.273958] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.274061] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.274230] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.274314] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.274467] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.274600] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.275028] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.275551] pnp: PnP ACPI: found 8 devices
[ 0.275565] ACPI: bus type PNP unregistered
[ 0.290989] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.291008] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.291040] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.291053] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
[ 0.291066] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
[ 0.291092] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 400000
[ 0.291121] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
[ 0.291134] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[ 0.291146] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000
[ 0.291206] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.291218] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.291230] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.291241] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.291253] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.291264] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.291276] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.291287] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.291297] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.291319] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.291334] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
[ 0.291349] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.291364] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x409fffff]
[ 0.291378] pci 0000:00:1c.3: BAR 14: assigned [mem 0x40a00000-0x40bfffff]
[ 0.291393] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40c00000-0x40dfffff 64bit pref]
[ 0.291409] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.291423] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.291436] pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.291451] pci 0000:00:1d.7: BAR 0: assigned [mem 0x40e00000-0x40e003ff]
[ 0.291471] pci 0000:00:1f.2: BAR 5: assigned [mem 0x40e00400-0x40e007ff]
[ 0.291494] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.291506] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.291522] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.291536] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.291553] pci 0000:00:1c.1: PCI bridge to [bus 07]
[ 0.291564] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.291580] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff]
[ 0.291594] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.291612] pci 0000:00:1c.2: PCI bridge to [bus 09]
[ 0.291623] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.291638] pci 0000:00:1c.2: bridge window [mem 0x40600000-0x409fffff]
[ 0.291653] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.291669] pci 0000:00:1c.3: PCI bridge to [bus 0b]
[ 0.291681] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.291696] pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff]
[ 0.291711] pci 0000:00:1c.3: bridge window [mem 0x40c00000-0x40dfffff 64bit pref]
[ 0.291728] pci 0000:00:1e.0: PCI bridge to [bus 11]
[ 0.291757] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.291767] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.291777] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.291787] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.291797] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.291807] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.291817] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.291827] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
[ 0.291838] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.291848] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.291859] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.291869] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 0.291879] pci_bus 0000:07: resource 1 [mem 0x40200000-0x403fffff]
[ 0.291890] pci_bus 0000:07: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.291900] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.291910] pci_bus 0000:09: resource 1 [mem 0x40600000-0x409fffff]
[ 0.291920] pci_bus 0000:09: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.291931] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
[ 0.291941] pci_bus 0000:0b: resource 1 [mem 0x40a00000-0x40bfffff]
[ 0.291952] pci_bus 0000:0b: resource 2 [mem 0x40c00000-0x40dfffff 64bit pref]
[ 0.291963] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.291973] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.291983] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.291992] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.292002] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.292012] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.292023] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.292032] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
[ 0.292165] NET: Registered protocol family 2
[ 0.292758] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.292894] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.293020] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.293125] TCP: reno registered
[ 0.293156] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.293192] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.293514] NET: Registered protocol family 1
[ 0.293585] pci 0000:00:02.0: Boot video device
[ 0.295276] PCI: CLS 32 bytes, default 64
[ 0.295522] Unpacking initramfs...
[ 0.513013] Freeing initrd memory: 3016K (ffff880037a0c000 - ffff880037cfe000)
[ 0.513116] Simple Boot Flag at 0x36 set to 0x1
[ 0.513793] Scanning for low memory corruption every 60 seconds
[ 0.515032] audit: initializing netlink socket (disabled)
[ 0.515070] type=2000 audit(1394370534.513:1): initialized
[ 0.564277] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.570214] zbud: loaded
[ 0.570965] VFS: Disk quotas dquot_6.5.2
[ 0.571166] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.571953] msgmni has been set to 1970
[ 0.572206] Key type big_key registered
[ 0.573227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.573437] io scheduler noop registered
[ 0.573449] io scheduler deadline registered
[ 0.573591] io scheduler cfq registered (default)
[ 0.574072] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.574268] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.574490] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.574845] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.575023] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.575233] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.575506] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.575579] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.575800] vesafb: mode is 800x600x32, linelength=3200, pages=0
[ 0.575807] vesafb: scrolling: redraw
[ 0.575816] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.576194] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001380000, using 1920k, total 1920k
[ 0.606920] Console: switching to colour frame buffer device 100x37
[ 0.637107] fb0: VESA VGA frame buffer device
[ 0.637176] intel_idle: MWAIT substates: 0x20220
[ 0.637208] intel_idle: v0.4 model 0x1C
[ 0.637215] intel_idle: lapic_timer_reliable_states 0x2
[ 0.637648] GHES: HEST is not enabled!
[ 0.637918] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.639469] Linux agpgart interface v0.103
[ 0.640109] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.640176] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.640656] drop_monitor: Initializing network drop monitor service
[ 0.640844] TCP: cubic registered
[ 0.641287] NET: Registered protocol family 10
[ 0.641929] NET: Registered protocol family 17
[ 0.641978] Key type dns_resolver registered
[ 0.643274] registered taskstats version 1
[ 0.644710] Magic number: 6:100:129
[ 0.644829] acpi device:04: hash matches
[ 0.644939] rtc_cmos 00:03: setting system clock to 2014-03-09 13:08:55 UTC (1394370535)
[ 0.645112] PM: Hibernation image not present or could not be loaded.
[ 0.650152] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 0.650166] Write protecting the kernel read-only data: 8192k
[ 0.662167] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
[ 0.667268] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
[ 0.692018] random: systemd-tmpfile urandom read with 5 bits of entropy available
[ 0.697516] systemd-udevd[59]: starting version 210
[ 0.785745] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.791279] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.791448] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.814644] ACPI: bus type USB registered
[ 0.814813] usbcore: registered new interface driver usbfs
[ 0.814895] usbcore: registered new interface driver hub
[ 0.815083] usbcore: registered new device driver usb
[ 0.818378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.819993] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.820526] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.820578] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.820716] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.823776] ehci-pci: EHCI PCI platform driver
[ 0.827135] hub 1-0:1.0: USB hub found
[ 0.827216] hub 1-0:1.0: 2 ports detected
[ 0.830173] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.830314] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.830438] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.832276] hub 2-0:1.0: USB hub found
[ 0.832328] hub 2-0:1.0: 2 ports detected
[ 0.832444] SCSI subsystem initialized
[ 0.833823] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.833873] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.834001] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.835187] hub 3-0:1.0: USB hub found
[ 0.835252] hub 3-0:1.0: 2 ports detected
[ 0.839235] libata version 3.00 loaded.
[ 0.839821] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.839858] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 0.839903] ehci-pci 0000:00:1d.7: debug port 1
[ 0.843862] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.843901] ehci-pci 0000:00:1d.7: irq 23, io mem 0x40e00000
[ 0.853473] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.854853] hub 4-0:1.0: USB hub found
[ 0.854920] hub 4-0:1.0: 8 ports detected
[ 0.880449] hub 1-0:1.0: USB hub found
[ 0.880518] hub 1-0:1.0: 2 ports detected
[ 0.903765] hub 2-0:1.0: USB hub found
[ 0.903824] hub 2-0:1.0: 2 ports detected
[ 0.926050] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.927048] hub 3-0:1.0: USB hub found
[ 0.927107] hub 3-0:1.0: 2 ports detected
[ 0.928029] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.928188] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.928313] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.929777] hub 5-0:1.0: USB hub found
[ 0.929849] hub 5-0:1.0: 2 ports detected
[ 0.930848] ahci 0000:00:1f.2: version 3.0
[ 0.931208] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.931409] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.931424] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 0.935736] scsi0 : ahci
[ 0.936734] scsi1 : ahci
[ 0.939580] scsi2 : ahci
[ 0.940048] scsi3 : ahci
[ 0.940802] ata1: SATA max UDMA/133 abar m1024@0x40e00400 port 0x40e00500 irq 44
[ 0.940822] ata2: SATA max UDMA/133 abar m1024@0x40e00400 port 0x40e00580 irq 44
[ 0.940837] ata3: SATA max UDMA/133 abar m1024@0x40e00400 port 0x40e00600 irq 44
[ 0.940850] ata4: SATA max UDMA/133 abar m1024@0x40e00400 port 0x40e00680 irq 44
[ 1.260176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.260251] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.260344] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.260435] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.261164] ata1.00: ATA-8: Hitachi HTS543225A7A384, ESBOA60W, max UDMA/133
[ 1.261176] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.262271] ata1.00: configured for UDMA/133
[ 1.262754] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 ESBO PQ: 0 ANSI: 5
[ 1.273059] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.273591] sd 0:0:0:0: [sda] Write Protect is off
[ 1.273612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.273806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.278286] sda: sda1 sda2
[ 1.279818] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.420155] usb 4-8: new high-speed USB device number 3 using ehci-pci
[ 1.776830] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 2.004472] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.787417] random: nonblocking pool is initialized
[ 3.030092] systemd[1]: systemd 210 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 3.031027] systemd[1]: Detected architecture 'x86-64'.
[ 3.055193] systemd[1]: Set hostname to <BinaryNet>.
[ 3.818614] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.819785] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.820053] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.820106] systemd[1]: Starting Remote File Systems.
[ 3.820154] systemd[1]: Reached target Remote File Systems.
[ 3.820211] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.820342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.820380] systemd[1]: Starting Paths.
[ 3.820422] systemd[1]: Reached target Paths.
[ 3.820470] systemd[1]: Starting Encrypted Volumes.
[ 3.820512] systemd[1]: Reached target Encrypted Volumes.
[ 3.820589] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.820895] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.820942] systemd[1]: Expecting device dev-sda2.device...
[ 3.820994] systemd[1]: Starting Root Slice.
[ 3.848091] systemd[1]: Created slice Root Slice.
[ 3.848148] systemd[1]: Starting User and Session Slice.
[ 3.848862] systemd[1]: Created slice User and Session Slice.
[ 3.848909] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.849021] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.849061] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.849162] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.849202] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.849299] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.849338] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.849436] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.849489] systemd[1]: Starting udev Control Socket.
[ 3.849572] systemd[1]: Listening on udev Control Socket.
[ 3.849623] systemd[1]: Starting udev Kernel Socket.
[ 3.849698] systemd[1]: Listening on udev Kernel Socket.
[ 3.849751] systemd[1]: Starting Journal Socket.
[ 3.849917] systemd[1]: Listening on Journal Socket.
[ 3.849990] systemd[1]: Starting System Slice.
[ 3.850825] systemd[1]: Created slice System Slice.
[ 3.850905] systemd[1]: Started File System Check on Root Device.
[ 3.850943] systemd[1]: Mounting Temporary Directory...
[ 3.877291] systemd[1]: Starting system-getty.slice.
[ 3.878257] systemd[1]: Created slice system-getty.slice.
[ 3.899333] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.899414] systemd[1]: Starting Setup Virtual Console...
[ 3.931599] systemd[1]: Started Load Kernel Modules.
[ 3.931732] systemd[1]: Mounting Huge Pages File System...
[ 3.933491] systemd[1]: Mounted FUSE Control File System.
[ 3.933623] systemd[1]: Starting udev Coldplug all Devices...
[ 3.935880] systemd[1]: Mounting Debug File System...
[ 3.938335] systemd[1]: Mounting Configuration File System...
[ 3.940243] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.961527] systemd[1]: Starting Apply Kernel Variables...
[ 4.006578] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.009397] systemd[1]: Starting Journal Service...
[ 4.012824] systemd[1]: Started Journal Service.
[ 4.513931] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 4.686501] systemd-udevd[143]: starting version 210
[ 4.925405] systemd-journald[124]: Received request to flush runtime journal from PID 1
[ 6.709049] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 6.709134] ACPI: Lid Switch [LID0]
[ 6.709278] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 6.709292] ACPI: Power Button [PWRB]
[ 6.709436] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 6.709446] ACPI: Sleep Button [SLPB]
[ 6.709580] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.709589] ACPI: Power Button [PWRF]
[ 6.737819] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.737830] ACPI: Thermal Zone [TZ00] (26 C)
[ 6.831884] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 6.831903] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 2 (20131115/utaddress-251)
[ 6.831914] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.831922] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC0.GPOX 1 (20131115/utaddress-251)
[ 6.831933] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.832001] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.928928] ACPI: AC Adapter [ADP1] (on-line)
[ 7.028221] ACPI: Battery Slot [BAT1] (battery present)
[ 7.060988] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.066864] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 7.067022] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 7.067278] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 7.067765] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 7.193147] microcode: CPU0 sig=0x106ca, pf=0x10, revision=0x107
[ 7.230652] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.292676] media: Linux media interface: v0.10
[ 7.340917] platform microcode: Direct firmware load failed with error -2
[ 7.340929] platform microcode: Falling back to user helper
[ 7.342412] Linux video capture interface: v2.00
[ 7.352837] [drm] Initialized drm 1.1.0 20060810
[ 7.416028] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 7.588265] uvcvideo: Found UVC 1.00 device WebCam SCB-0385N (2232:1005)
[ 7.590612] input: WebCam SCB-0385N as /devices/pci0000:00/0000:00:1d.7/usb4/4-8/4-8:1.0/input/input8
[ 7.590929] usbcore: registered new interface driver uvcvideo
[ 7.590936] USB Video Class driver (1.1.1)
[ 7.650495] samsung_laptop: detected SABI interface: SwSmi@
[ 7.650508] samsung_laptop: Backlight controlled by ACPI video driver
[ 7.676459] microcode: CPU1 sig=0x106ca, pf=0x10, revision=0x107
[ 7.676552] platform microcode: Direct firmware load failed with error -2
[ 7.676560] platform microcode: Falling back to user helper
[ 7.688646] [drm] Memory usable by graphics device = 512M
[ 7.688662] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
[ 7.688669] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 7.688723] Console: switching to colour dummy device 80x25
[ 7.730877] microcode: CPU2 sig=0x106ca, pf=0x10, revision=0x107
[ 7.730948] platform microcode: Direct firmware load failed with error -2
[ 7.730963] platform microcode: Falling back to user helper
[ 7.733700] microcode: CPU3 sig=0x106ca, pf=0x10, revision=0x107
[ 7.733779] platform microcode: Direct firmware load failed with error -2
[ 7.733790] platform microcode: Falling back to user helper
[ 7.735949] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.743568] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 7.743598] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.743603] [drm] Driver supports precise vblank timestamp query.
[ 7.743726] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.786388] iTCO_vendor_support: vendor-support=0
[ 7.815905] [drm] initialized overlay support
[ 7.831080] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 7.831168] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
[ 7.831622] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.995246] Bluetooth: Core ver 2.17
[ 7.995307] NET: Registered protocol family 31
[ 7.995312] Bluetooth: HCI device and connection manager initialized
[ 7.995335] Bluetooth: HCI socket layer initialized
[ 7.995344] Bluetooth: L2CAP socket layer initialized
[ 7.995361] Bluetooth: SCO socket layer initialized
[ 8.022853] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 8.022899] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 8.022931] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 8.022987] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 8.033872] bcma: bus0: Bus registered
[ 8.050134] usbcore: registered new interface driver btusb
[ 8.109066] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xd00033/0x240000/0xa0400, board id: 1748, fw id: 755386
[ 8.150754] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 8.158545] fbcon: inteldrmfb (fb0) is primary device
[ 8.527898] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.527934] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.528344] r8169 0000:09:00.0: irq 46 for MSI/MSI-X
[ 8.528972] r8169 0000:09:00.0 eth0: RTL8105e at 0xffffc9000193a000, e8:11:32:56:ef:87, XID 00900000 IRQ 46
[ 8.566882] mousedev: PS/2 mouse device common for all mice
[ 8.576884] systemd-udevd[156]: renamed network interface eth0 to enp9s0
[ 8.576888] Console: switching to colour frame buffer device 128x37
[ 8.585031] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.585037] i915 0000:00:02.0: registered panic notifier
[ 8.585647] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 8.587524] acpi device:04: registered as cooling_device4
[ 8.587890] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 8.588386] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.588829] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 8.930211] cfg80211: Calling CRDA to update world regulatory domain
[ 9.314835] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 9.315099] b43: probe of bcma0:0 failed with error -524
[ 9.315158] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 9.383125] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[ 9.405283] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.406164] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
[ 9.710152] Adding 3025076k swap on /dev/sda2. Priority:-1 extents:1 across:3025076k FS
[ 10.836824] hda-codec: out of range cmd 0:20:400:ffffffff
[ 10.841537] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.842055] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 21.056588] type=1006 audit(1394370555.906:2): pid=211 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
[ 21.171673] type=1006 audit(1394370556.023:3): pid=213 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
[ 24.946310] r8169 0000:09:00.0 enp9s0: link down
[ 24.946402] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
[ 25.262474] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 25.262669] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 25.263045] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 62.233461] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 62.519337] hidraw: raw HID events driver (C) Jiri Kosina
[ 62.545487] usbcore: registered new interface driver usbhid
[ 62.545496] usbhid: USB HID core driver
[ 62.582301] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input12
[ 62.582991] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1/input0
[ 62.588402] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input13
[ 62.589398] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-1/input1
[ 69.663207] type=1006 audit(1394370604.512:4): pid=369 uid=0 old auid=0 new auid=1000 old ses=1 new ses=3 res=1
[ 218.262668] r8169 0000:09:00.0 enp9s0: link up
[ 218.262704] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes readyOffline
#6 2014-03-09 11:29:36
- graysky
- Wiki Maintainer
- From: :wq
- Registered: 2008-12-01
- Posts: 10,729
- Website
Re: Slow graphics on Intel Atom N550
@op - If it can't load the i915 module something is not right... do you have "i915" in the MODULES array of /etc/mkinitcpio.conf and have you regenerated kernel images with it there? You have the correct drivers installed per your last post. If all this is true, consider the git driver as a test, https://aur.archlinux.org/packages/xf86 … intel-git/
Offline
#7 2014-03-09 12:26:23
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,607
Re: Slow graphics on Intel Atom N550
That dmesg output looks fine, agpgart-intel and i915 recognize your GMA3150 and load properly. Post /var/log/Xorg.0.log
Hmm, maybe you got hit by the current issues with the mesa package. Update you machine, it should give you mesa-10.1.0-2, mesa-libgl-10.1.0-2 and intel-dri-10.1.0-2, then check glxinfo again.
PS. Is there a reason you're using AccelMethod uxa? sna works just fine on this thing.
Offline
#8 2014-03-09 12:36:52
- adomas
- Member
- From: Berlin, Germany
- Registered: 2011-01-05
- Posts: 43
Re: Slow graphics on Intel Atom N550
I updated the system with mesa-10.1.0-2, mesa-libgl-10.1.0-2 and intel-dri-10.1.0-2. Now in glxinfo I get
"
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: i915
"
maybe I need to add myself to somekind of opengl group?
/var/log/Xorg.0.log
[ 69.420]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 69.420] X Protocol Version 11, Revision 0
[ 69.420] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 69.420] Current Operating System: Linux BinaryNet 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 69.420] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c99675fe-cdac-4f3d-ae0c-1d8f75d3bdb4 rw quiet
[ 69.420] Build Date: 09 January 2014 08:47:24AM
[ 69.420]
[ 69.420] Current version of pixman: 0.32.4
[ 69.420] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.420] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 69.421] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 9 16:31:26 2014
[ 69.492] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 69.492] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 69.539] (==) No Layout section. Using the first Screen section.
[ 69.539] (==) No screen section available. Using defaults.
[ 69.539] (**) |-->Screen "Default Screen Section" (0)
[ 69.539] (**) | |-->Monitor "<default monitor>"
[ 69.556] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 69.556] (**) | |-->Device "Intel Graphics"
[ 69.556] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 69.556] (==) Automatically adding devices
[ 69.557] (==) Automatically enabling devices
[ 69.557] (==) Automatically adding GPU devices
[ 69.632] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 69.632] Entry deleted from font path.
[ 69.632] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 69.632] Entry deleted from font path.
[ 69.641] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 69.641] Entry deleted from font path.
[ 69.641] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 69.642] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 69.642] Entry deleted from font path.
[ 69.642] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 69.642] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 69.642] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 69.642] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 69.642] (II) Loader magic: 0x804c80
[ 69.642] (II) Module ABI versions:
[ 69.642] X.Org ANSI C Emulation: 0.4
[ 69.642] X.Org Video Driver: 15.0
[ 69.642] X.Org XInput driver : 20.0
[ 69.642] X.Org Server Extension : 8.0
[ 69.643] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 69.647] (--) PCI:*(0:0:2:0) 8086:a011:144d:c0a8 rev 2, Mem @ 0xf0200000/524288, 0xd0000000/268435456, 0xf0000000/1048576, I/O @ 0x000018d0/8
[ 69.647] (--) PCI: (0:0:2:1) 8086:a012:144d:c0a8 rev 2, Mem @ 0xf0280000/524288
[ 69.647] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 69.685] Initializing built-in extension Generic Event Extension
[ 69.685] Initializing built-in extension SHAPE
[ 69.685] Initializing built-in extension MIT-SHM
[ 69.685] Initializing built-in extension XInputExtension
[ 69.685] Initializing built-in extension XTEST
[ 69.685] Initializing built-in extension BIG-REQUESTS
[ 69.685] Initializing built-in extension SYNC
[ 69.685] Initializing built-in extension XKEYBOARD
[ 69.685] Initializing built-in extension XC-MISC
[ 69.685] Initializing built-in extension SECURITY
[ 69.686] Initializing built-in extension XINERAMA
[ 69.686] Initializing built-in extension XFIXES
[ 69.686] Initializing built-in extension RENDER
[ 69.686] Initializing built-in extension RANDR
[ 69.686] Initializing built-in extension COMPOSITE
[ 69.686] Initializing built-in extension DAMAGE
[ 69.686] Initializing built-in extension MIT-SCREEN-SAVER
[ 69.686] Initializing built-in extension DOUBLE-BUFFER
[ 69.686] Initializing built-in extension RECORD
[ 69.686] Initializing built-in extension DPMS
[ 69.686] Initializing built-in extension Present
[ 69.686] Initializing built-in extension DRI3
[ 69.686] Initializing built-in extension X-Resource
[ 69.686] Initializing built-in extension XVideo
[ 69.687] Initializing built-in extension XVideo-MotionCompensation
[ 69.687] Initializing built-in extension XFree86-VidModeExtension
[ 69.687] Initializing built-in extension XFree86-DGA
[ 69.687] Initializing built-in extension XFree86-DRI
[ 69.687] Initializing built-in extension DRI2
[ 69.687] (II) "glx" will be loaded by default.
[ 69.687] (II) LoadModule: "dri2"
[ 69.687] (II) Module "dri2" already built-in
[ 69.687] (II) LoadModule: "glamoregl"
[ 69.719] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 69.951] (II) Module glamoregl: vendor="X.Org Foundation"
[ 69.951] compiled for 1.15.0, module version = 0.6.0
[ 69.951] ABI class: X.Org ANSI C Emulation, version 0.4
[ 69.951] (II) LoadModule: "glx"
[ 69.951] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 69.978] (II) Module glx: vendor="X.Org Foundation"
[ 69.978] compiled for 1.15.0, module version = 1.0.0
[ 69.978] ABI class: X.Org Server Extension, version 8.0
[ 69.978] (==) AIGLX enabled
[ 69.978] Loading extension GLX
[ 69.978] (II) LoadModule: "intel"
[ 69.979] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 70.075] (II) Module intel: vendor="X.Org Foundation"
[ 70.075] compiled for 1.15.0, module version = 2.99.910
[ 70.075] Module class: X.Org Video Driver
[ 70.075] ABI class: X.Org Video Driver, version 15.0
[ 70.075] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 70.077] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 70.077] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 70.077] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 70.077] (++) using VT number 7
[ 70.088] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 70.089] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 70.089] (==) intel(0): RGB weight 888
[ 70.089] (==) intel(0): Default visual is TrueColor
[ 70.089] (**) intel(0): Option "AccelMethod" "uxa"
[ 70.089] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[ 70.089] (**) intel(0): Relaxed fencing enabled
[ 70.089] (**) intel(0): Wait on SwapBuffers? enabled
[ 70.089] (**) intel(0): Triple buffering? enabled
[ 70.089] (**) intel(0): Framebuffer tiled
[ 70.089] (**) intel(0): Pixmaps tiled
[ 70.089] (**) intel(0): 3D buffers tiled
[ 70.089] (**) intel(0): SwapBuffers wait enabled
[ 70.089] (==) intel(0): video overlay key set to 0x101fe
[ 70.090] (II) intel(0): Output LVDS1 has no monitor section
[ 70.091] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 70.130] (II) intel(0): Output VGA1 has no monitor section
[ 70.130] (II) intel(0): EDID for output LVDS1
[ 70.130] (II) intel(0): Manufacturer: SEC Model: 3242 Serial#: 0
[ 70.130] (II) intel(0): Year: 2011 Week: 0
[ 70.131] (II) intel(0): EDID Version: 1.3
[ 70.131] (II) intel(0): Digital Display Input
[ 70.131] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 70.131] (II) intel(0): Gamma: 2.20
[ 70.131] (II) intel(0): No DPMS capabilities specified
[ 70.131] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 70.131] (II) intel(0): First detailed timing is preferred mode
[ 70.131] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.310 greenY: 0.560
[ 70.131] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 70.131] (II) intel(0): Manufacturer's mask: 0
[ 70.131] (II) intel(0): Supported detailed timing:
[ 70.131] (II) intel(0): clock: 57.6 MHz Image Size: 223 x 125 mm
[ 70.131] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1352 h_border: 0
[ 70.131] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 609 v_blanking: 710 v_border: 0
[ 70.132] (II) intel(0): Unknown vendor-specific block f
[ 70.132] (II) intel(0): SAMSUNG
[ 70.132] (II) intel(0): 101NT08-805
[ 70.132] (II) intel(0): EDID (in hex):
[ 70.132] (II) intel(0): 00ffffffffffff004ca3423200000000
[ 70.132] (II) intel(0): 0015010380160d780a859599574f8f26
[ 70.132] (II) intel(0): 21505400000001010101010101010101
[ 70.132] (II) intel(0): 0101010101018016004841586e201888
[ 70.132] (II) intel(0): 3600df7d000000190000000f00000000
[ 70.132] (II) intel(0): 000000000058d20a5500000000fe0053
[ 70.132] (II) intel(0): 414d53554e470a2020202020000000fe
[ 70.132] (II) intel(0): 003130314e5430382d3830350a200046
[ 70.133] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 70.133] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 70.133] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 70.133] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 70.133] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 70.133] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 70.133] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 70.133] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 70.133] (II) intel(0): Printing probed modes for output LVDS1
[ 70.133] (II) intel(0): Modeline "1024x600"x60.0 57.60 1024 1048 1184 1352 600 603 609 710 -hsync -vsync (42.6 kHz eP)
[ 70.133] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 70.133] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 70.134] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 70.167] (II) intel(0): EDID for output VGA1
[ 70.167] (II) intel(0): Output LVDS1 connected
[ 70.167] (II) intel(0): Output VGA1 disconnected
[ 70.167] (II) intel(0): Using exact sizes for initial modes
[ 70.167] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 70.167] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 70.167] (II) intel(0): Kernel page flipping support detected, enabling
[ 70.167] (==) intel(0): DPI set to (96, 96)
[ 70.167] (II) Loading sub module "fb"
[ 70.167] (II) LoadModule: "fb"
[ 70.168] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 70.183] (II) Module fb: vendor="X.Org Foundation"
[ 70.183] compiled for 1.15.0, module version = 1.0.0
[ 70.183] ABI class: X.Org ANSI C Emulation, version 0.4
[ 70.183] (II) Loading sub module "dri2"
[ 70.183] (II) LoadModule: "dri2"
[ 70.183] (II) Module "dri2" already built-in
[ 70.183] (==) Depth 24 pixmap format is 32 bpp
[ 70.184] (II) intel(0): [DRI2] Setup complete
[ 70.184] (II) intel(0): [DRI2] DRI driver: i915
[ 70.184] (II) intel(0): [DRI2] VDPAU driver: i915
[ 70.185] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 70.186] (II) UXA(0): Driver registered support for the following operations:
[ 70.186] (II) solid
[ 70.186] (II) copy
[ 70.186] (II) composite (RENDER acceleration)
[ 70.186] (II) put_image
[ 70.186] (II) get_image
[ 70.186] (==) intel(0): Backing store enabled
[ 70.186] (==) intel(0): Silken mouse enabled
[ 70.187] (II) intel(0): Initializing HW Cursor
[ 70.187] (II) intel(0): Use standard UXA acceleration.
[ 70.187] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 70.188] (==) intel(0): DPMS enabled
[ 70.188] (==) intel(0): Intel XvMC decoder disabled
[ 70.188] (II) intel(0): Set up textured video
[ 70.188] (II) intel(0): Set up overlay video
[ 70.189] (II) intel(0): direct rendering: DRI2 Enabled
[ 70.189] (==) intel(0): hotplug detection: "enabled"
[ 70.226] (--) RandR disabled
[ 70.456] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 70.456] (II) AIGLX: enabled GLX_ARB_create_context
[ 70.456] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 70.456] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 70.456] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 70.456] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 70.456] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 70.456] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 70.456] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 70.456] (II) AIGLX: Loaded and initialized i915
[ 70.456] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 70.458] (II) intel(0): Setting screen physical size to 270 x 158
[ 71.508] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 71.508] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 71.508] (II) LoadModule: "evdev"
[ 71.523] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 71.546] (II) Module evdev: vendor="X.Org Foundation"
[ 71.546] compiled for 1.15.0, module version = 2.8.2
[ 71.546] Module class: X.Org XInput Driver
[ 71.546] ABI class: X.Org XInput driver, version 20.0
[ 71.546] (II) Using input driver 'evdev' for 'Power Button'
[ 71.546] (**) Power Button: always reports core events
[ 71.546] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 71.546] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 71.546] (--) evdev: Power Button: Found keys
[ 71.546] (II) evdev: Power Button: Configuring as keyboard
[ 71.546] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 71.547] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 71.547] (**) Option "xkb_rules" "evdev"
[ 71.547] (**) Option "xkb_model" "pc104"
[ 71.547] (**) Option "xkb_layout" "us"
[ 71.645] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 71.645] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 71.645] (II) Using input driver 'evdev' for 'Video Bus'
[ 71.645] (**) Video Bus: always reports core events
[ 71.645] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 71.645] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 71.645] (--) evdev: Video Bus: Found keys
[ 71.645] (II) evdev: Video Bus: Configuring as keyboard
[ 71.645] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 71.645] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 71.645] (**) Option "xkb_rules" "evdev"
[ 71.645] (**) Option "xkb_model" "pc104"
[ 71.645] (**) Option "xkb_layout" "us"
[ 71.647] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 71.647] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 71.647] (II) Using input driver 'evdev' for 'Power Button'
[ 71.647] (**) Power Button: always reports core events
[ 71.647] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 71.647] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 71.647] (--) evdev: Power Button: Found keys
[ 71.647] (II) evdev: Power Button: Configuring as keyboard
[ 71.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 71.648] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 71.648] (**) Option "xkb_rules" "evdev"
[ 71.648] (**) Option "xkb_model" "pc104"
[ 71.648] (**) Option "xkb_layout" "us"
[ 71.649] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 71.649] (II) No input driver specified, ignoring this device.
[ 71.649] (II) This device may have been added with another device file.
[ 71.650] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 71.650] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 71.650] (II) Using input driver 'evdev' for 'Sleep Button'
[ 71.650] (**) Sleep Button: always reports core events
[ 71.651] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 71.651] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 71.651] (--) evdev: Sleep Button: Found keys
[ 71.651] (II) evdev: Sleep Button: Configuring as keyboard
[ 71.651] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 71.651] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 71.651] (**) Option "xkb_rules" "evdev"
[ 71.651] (**) Option "xkb_model" "pc104"
[ 71.651] (**) Option "xkb_layout" "us"
[ 71.652] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 71.653] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[ 71.653] (II) No input driver specified, ignoring this device.
[ 71.653] (II) This device may have been added with another device file.
[ 71.654] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[ 71.654] (II) No input driver specified, ignoring this device.
[ 71.654] (II) This device may have been added with another device file.
[ 71.655] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[ 71.655] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 71.655] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 71.655] (**) Logitech USB Receiver: always reports core events
[ 71.655] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
[ 71.656] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 71.656] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 71.656] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 71.656] (--) evdev: Logitech USB Receiver: Found relative axes
[ 71.656] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 71.656] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 71.656] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 71.656] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 71.656] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 71.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input9/event7"
[ 71.656] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 71.656] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 71.657] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 71.657] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 71.657] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 71.657] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 71.658] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 71.658] (II) No input driver specified, ignoring this device.
[ 71.658] (II) This device may have been added with another device file.
[ 71.659] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[ 71.660] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 71.660] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 71.660] (**) Logitech USB Receiver: always reports core events
[ 71.660] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[ 71.660] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 71.660] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 71.660] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 71.660] (--) evdev: Logitech USB Receiver: Found relative axes
[ 71.660] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 71.660] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 71.660] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 71.660] (--) evdev: Logitech USB Receiver: Found keys
[ 71.660] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 71.660] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 71.660] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 71.660] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 71.661] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 71.661] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input10/event8"
[ 71.661] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 71.661] (**) Option "xkb_rules" "evdev"
[ 71.661] (**) Option "xkb_model" "pc104"
[ 71.661] (**) Option "xkb_layout" "us"
[ 71.662] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 71.662] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 71.662] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 71.662] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 71.662] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 71.662] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 71.664] (II) config/udev: Adding input device WebCam SCB-0385N (/dev/input/event9)
[ 71.664] (**) WebCam SCB-0385N: Applying InputClass "evdev keyboard catchall"
[ 71.664] (II) Using input driver 'evdev' for 'WebCam SCB-0385N'
[ 71.664] (**) WebCam SCB-0385N: always reports core events
[ 71.664] (**) evdev: WebCam SCB-0385N: Device: "/dev/input/event9"
[ 71.664] (--) evdev: WebCam SCB-0385N: Vendor 0x2232 Product 0x1005
[ 71.664] (--) evdev: WebCam SCB-0385N: Found keys
[ 71.664] (II) evdev: WebCam SCB-0385N: Configuring as keyboard
[ 71.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-8/5-8:1.0/input/input11/event9"
[ 71.664] (II) XINPUT: Adding extended input device "WebCam SCB-0385N" (type: KEYBOARD, id 12)
[ 71.664] (**) Option "xkb_rules" "evdev"
[ 71.664] (**) Option "xkb_model" "pc104"
[ 71.664] (**) Option "xkb_layout" "us"
[ 71.666] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 71.666] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 71.666] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 71.666] (**) AT Translated Set 2 keyboard: always reports core events
[ 71.666] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[ 71.666] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 71.666] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 71.666] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 71.667] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 71.667] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 71.667] (**) Option "xkb_rules" "evdev"
[ 71.667] (**) Option "xkb_model" "pc104"
[ 71.667] (**) Option "xkb_layout" "us"
[ 71.668] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 71.669] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 71.669] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 71.669] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 71.669] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
[ 71.669] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
[ 71.669] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 71.669] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 71.669] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 71.669] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 71.669] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 71.669] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 71.669] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 71.669] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 71.669] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 71.669] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event10"
[ 71.670] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 71.670] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 71.671] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 71.671] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 71.671] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 71.671] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 71.672] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 71.672] (II) No input driver specified, ignoring this device.
[ 71.672] (II) This device may have been added with another device file.
[ 71.672] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 71.672] (II) No input driver specified, ignoring this device.
[ 71.672] (II) This device may have been added with another device file.
[ 118.001] (II) intel(0): EDID vendor "SEC", prod id 12866
[ 118.002] (II) intel(0): Printing DDC gathered Modelines:
[ 118.002] (II) intel(0): Modeline "1024x600"x0.0 57.60 1024 1048 1184 1352 600 603 609 710 -hsync -vsync (42.6 kHz eP)
[ 121.025] (II) intel(0): EDID vendor "SEC", prod id 12866
[ 121.025] (II) intel(0): Printing DDC gathered Modelines:
[ 121.025] (II) intel(0): Modeline "1024x600"x0.0 57.60 1024 1048 1184 1352 600 603 609 710 -hsync -vsync (42.6 kHz eP)
[ 133.698] (II) intel(0): EDID vendor "SEC", prod id 12866
[ 133.698] (II) intel(0): Printing DDC gathered Modelines:
[ 133.698] (II) intel(0): Modeline "1024x600"x0.0 57.60 1024 1048 1184 1352 600 603 609 710 -hsync -vsync (42.6 kHz eP)Offline
#9 2014-03-09 12:48:56
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,607
Re: Slow graphics on Intel Atom N550
adomas wrote:
I updated the system with mesa-10.1.0-2, mesa-libgl-10.1.0-2 and intel-dri-10.1.0-2. Now in glxinfo I get
"
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: i915
"
maybe I need to add myself to somekind of opengl group?
logind should take care of that. So you must be starting your X session in a way that it isn't tracked by logind. Without logind, you need to be in the video group.
Offline
Pages: 1