You are not logged in.

Pages: 1

#1 2006-01-25 11:25:44

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

gnome-power-manager

Hello

I am trying to make a package for gnome-power-manager though everytime i try to launch it crashes i am not sure why though
here's my PKGBUILD till this moment

# Maintainer: Wael Nasreddine <wael_nasreddine@hotmail.com>

pkgname=gnome-power-manager
pkgver=0.3.1
pkgrel=1
pkgdesc="Power Manager for gnome"
url="http://www.gnome.org/projects/gnome-power-manager/"
depends=('hal' 'dbus' 'libnotify')
makedepends=()
source=(http://dl.sourceforge.net/sourceforge/gnome-power/$pkgname-$pkgver.tar.gz)
md5sums=('7a36ed3af51fe005dbd12a88f09d7c13')

build() {
  cd $startdir/src/$pkgname-$pkgver
  ./configure --prefix=/opt/gnome --with-gconf-source=xml::/opt/gnome/etc/gconf/ --enable-libnotify
  make || return 1
  make DESTDIR=${startdir}/pkg install || return 1 

  install -D -m644 $startdir/pkg/opt/gnome/etc/dbus-1/system.d/gnome-power-manager.conf 
          $startdir/pkg/etc/dbus-1/system.d/gnome-power-manager.conf || return 1
}

can someone help please?

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#2 2006-01-25 11:38:12

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

is it because arch's hal package is verion 0.5.5.1-5 while version 0.5.6 is needed?
i tried to compile it but unfortunately patches are dedicated to 0.5.5.1, i did notify maintainer though

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#3 2006-01-25 16:32:24

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

Following tomk suggestion at This post didn't change anything, it seems that it ignore the configure option --disable-schemas-install but it still give me warning about not able t create them sad
here's the new files

# Maintainer: Wael Nasreddine <wael_nasreddine@hotmail.com>

pkgname=gnome-power-manager
pkgver=0.3.1
pkgrel=1
pkgdesc="Power Manager for gnome"
url="http://www.gnome.org/projects/gnome-power-manager/"
depends=('hal' 'dbus' 'libnotify')
makedepends=()
source=(http://dl.sourceforge.net/sourceforge/gnome-power/$pkgname-$pkgver.tar.gz)
install=gnome-power-manager.install
md5sums=('7a36ed3af51fe005dbd12a88f09d7c13')

build() {
  cd $startdir/src/$pkgname-$pkgver
  ./configure --prefix=/opt/gnome --disable-schemas-install --enable-libnotify
  make || return 1
  make DESTDIR=${startdir}/pkg install || return 1 

  install -D -m644 $startdir/pkg/opt/gnome/etc/dbus-1/system.d/gnome-power-manager.conf 
          $startdir/pkg/etc/dbus-1/system.d/gnome-power-manager.conf || return 1
}

gnome-power-manager.install

pkgname=gnome-power-manager

post_install() {
  schemas=(`pacman -Ql $pkgname | grep 'gconf/schemas/.*schemas$' | awk '{ print $2 }'`)
  scrolls=(`pacman -Ql $pkgname | grep 'share/omf/.*.omf$' | awk '{ print $2 }'`)

  export GCONF_CONFIG_SOURCE=`opt/gnome/bin/gconftool-2 --get-default-source`
  for schema in "${schemas[@]}" ; do
    opt/gnome/bin/gconftool-2 --makefile-install-rule "$schema" >/dev/null 2>&1
  done

  for scroll in "${scrolls[@]}" ; do
    scrollkeeper-install -q -p var/lib/scrollkeeper "$scroll"
  done

  kill -s HUP `pidof /opt/gnome/bin/gconfd-2` >/dev/null 2>&1
  update-desktop-database -q
}

pre_upgrade() {
  pre_remove $1
}

post_upgrade() {
  post_install $1
}

pre_remove() {
  schemas=(`pacman -Ql $pkgname | grep 'gconf/schemas/.*schemas$' | awk '{ print $2 }'`)
  scrolls=(`pacman -Ql $pkgname | grep 'share/omf/.*.omf$' | awk '{ print $2 }'`)

  export GCONF_CONFIG_SOURCE=`opt/gnome/bin/gconftool-2 --get-default-source`
  for schema in "${schemas[@]}" ; do
    opt/gnome/bin/gconftool-2 --makefile-uninstall-rule "$schema" >/dev/null 2>&1
  done

  for scroll in "${scrolls[@]}" ; do
    scrollkeeper-uninstall -q -p var/lib/scrollkeeper "$scroll"
  done

  kill -s HUP `pidof /opt/gnome/bin/gconfd-2` >/dev/null 2>&1
}

post_remove() {
  update-desktop-database -q
}

op=$1
shift

$op $*

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#4 2006-01-25 17:48:31

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: gnome-power-manager

You need to look at ./configure --help to see if that's a valid option for power-manager. It is valid for ekiga, but that doesn't mean it will apply for every gnome app.

Have a look at some official gnome PKGBUILDs - there may be other ways of doing the same thing ( there usually is with Linux smile ).

Offline

#5 2006-01-25 19:27:31

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

yeah tomk i know that smile, configure already accept that option, but it doesnt seem to be working sad

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#6 2006-01-25 21:20:47

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: gnome-power-manager

OK, I'l have another look.

In the meantime, have a look at the gnomemeeting PKGBUILD in [extra] - in that case, JGC handles it by setting

GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1

at the 'make install' stage.

Offline

#7 2006-01-26 00:41:50

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

Great! that solved the compilation problem i had another problem with libnotify but for the moment i've disabled it to see if at least it work for the moment or not and NO! sad
Reading gnome-power-manager F.A.Q http://www.gnome.org/projects/gnome-pow … nd_failure i think it will never work with the hal version we have here, it require HAL >= 0.5.6 while arch's Hal is Version 0.5.5.1 So we won't eb able to hibernate/suspend untill we have new Hal if i am not mistaken, Gnome power manager is launched and it does display battery level/time remaining but when i click on hibernate/suspend nothing happens sad

oh well i notified hal maintainer hopefully he can get the new version, i'll try my best to have hal 0.5.6 but i have to edit patches because they don't work, i tried

anyway here's the current PKGBUILD and install file

PKGBUILD 

# Maintainer: Wael Nasreddine <wael_nasreddine@hotmail.com>

pkgname=gnome-power-manager
pkgver=0.3.1
pkgrel=1
pkgdesc="Power Manager for gnome"
url="http://www.gnome.org/projects/gnome-power-manager/"
depends=('hal' 'dbus' 'libnotify')
makedepends=()
source=(http://dl.sourceforge.net/sourceforge/gnome-power/$pkgname-$pkgver.tar.gz)
install=gnome-power-manager.install
md5sums=('7a36ed3af51fe005dbd12a88f09d7c13')

build() {
  cd $startdir/src/$pkgname-$pkgver
  ./configure --prefix=/opt/gnome --disable-schemas-install --disable-libnotify # --enable-libnotify
  make || return 1
  make GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 DESTDIR=${startdir}/pkg install || return 1 

  install -D -m644 $startdir/pkg/opt/gnome/etc/dbus-1/system.d/gnome-power-manager.conf 
          $startdir/pkg/etc/dbus-1/system.d/gnome-power-manager.conf || return 1
}

gnome-power-manager.install 

pkgname=gnome-power-manager

post_install() {
  schemas=(`pacman -Ql $pkgname | grep 'gconf/schemas/.*schemas$' | awk '{ print $2 }'`)
  scrolls=(`pacman -Ql $pkgname | grep 'share/omf/.*.omf$' | awk '{ print $2 }'`)

  export GCONF_CONFIG_SOURCE=`opt/gnome/bin/gconftool-2 --get-default-source`
  for schema in "${schemas[@]}" ; do
    opt/gnome/bin/gconftool-2 --makefile-install-rule "$schema" >/dev/null 2>&1
  done

  for scroll in "${scrolls[@]}" ; do
    scrollkeeper-install -q -p var/lib/scrollkeeper "$scroll"
  done

  kill -s HUP `pidof /opt/gnome/bin/gconfd-2` >/dev/null 2>&1
  update-desktop-database -q
}

pre_upgrade() {
  pre_remove $1
}

post_upgrade() {
  post_install $1
}

pre_remove() {
  schemas=(`pacman -Ql $pkgname | grep 'gconf/schemas/.*schemas$' | awk '{ print $2 }'`)
  scrolls=(`pacman -Ql $pkgname | grep 'share/omf/.*.omf$' | awk '{ print $2 }'`)

  export GCONF_CONFIG_SOURCE=`opt/gnome/bin/gconftool-2 --get-default-source`
  for schema in "${schemas[@]}" ; do
    opt/gnome/bin/gconftool-2 --makefile-uninstall-rule "$schema" >/dev/null 2>&1
  done

  for scroll in "${scrolls[@]}" ; do
    scrollkeeper-uninstall -q -p var/lib/scrollkeeper "$scroll"
  done

  kill -s HUP `pidof /opt/gnome/bin/gconfd-2` >/dev/null 2>&1
}

post_remove() {
  update-desktop-database -q
}

op=$1
shift

$op $*

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#8 2006-01-26 02:18:09

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

Ok i managed my way to update hal to the latest version, patches aren't all needed, they are already applied though one patch is applied though, i changed it in a way to patch 0.5.6, Everything seem to work fine with the new hal but gnomr-power-manager does not appear in notification area, donno why  :cry:
[EDIT]
look at this i think i missed some kind of configure option ok ill dig into it smile 

[wael@nasreddine gnome-power-manager]$ gnome-power-manager  --no-daemon

** (gnome-power-manager:10225): CRITICAL **: HAL does not have PowerManagement capability

[/EDIT]
Here's the new hal Files, hope someone will notify maintainer so he don't have to re-do what i already done (maybe verify them)

PKGBUILD 

# $Id: PKGBUILD,v 1.28 2006/01/05 11:39:44 tpowa Exp $
# Maintainer: Arjan Timmerman <arjan@soulfly.nl>
# Contributor: Link Dupont <link@subpop.net>

pkgname=hal
pkgver=0.5.6
pkgrel=1
pkgdesc="Hardware Abstraction Layer"
url="http://www.freedesktop.org/Software/hal"
depends=('dbus>=0.50' 'libusb' 'popt' 'udev>=062')
makedepends=('pkgconfig')
install=hal.install
source=(http://freedesktop.org/~david/dist/${pkgname}-${pkgver}.tar.gz
    hal
    storage-policy.fdi.patch
    hal.udev.rules)
md5sums=('1e494b4319bbdfeb25224f914e34d0d3' 'efa2f0e34b828a1fff9c1ba374d1ae5d'
         '084f9dfb4d9f95969595ddcd8f135795' '9f0f79f6d03730a437cdd1811d1ddddf')
          
build() {
  cd ${startdir}/src/${pkgname}-${pkgver}
  patch -Np0 -i ${startdir}/src/storage-policy.fdi.patch || return 1
  #patch -Np1 -i ${startdir}/src/hal-0.5.4-match-on-capabilities.patch || return 1  #No longer Needed!
  #patch -Np1 -i ${startdir}/src/udev-socket.patch || return 1 #No longer Needed!
  
  ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var 
              --disable-docbook-docs --disable-doxygen-docs 
          --enable-pcmcia-support --with-stab-file=/var/lib/pcmcia/stab 
          --with-hal-user=hal --with-hal-group=hal 
          --with-pid-file=/var/run/hald.pid || return 1

  sed -e 's/device-manager//' -i tools/Makefile || return 1
  make || return 1
  make DESTDIR=${startdir}/pkg install || return 1
  install -D -m 755 ${startdir}/src/hal ${startdir}/pkg/etc/rc.d/hal || return 1
  install -D -m 644 ${startdir}/src/hal.udev.rules ${startdir}/pkg/etc/udev/rules.d/hal.rules
  mkdir -p $startdir/pkg/media
  # remove unneeded symlink to hotplug dir, it's not needed anymore 
  rm -r ${startdir}/pkg/etc/hotplug.d/
  find ${startdir}/pkg -name '*.la' -exec rm {} ;
}

hal 

#!/bin/bash

# general config
. /etc/rc.conf
. /etc/rc.d/functions

case "$1" in
    start)
        #Check for running dbus, start when not running
        ck_daemon dbus && /etc/rc.d/dbus start
        stat_busy "Starting Hardware Abstraction Layer"
    /usr/sbin/hald
    if [ $? -gt 0 ]; then
        stat_fail
    else
        add_daemon hal
        stat_done
    fi
        ;;
    stop)
    stat_busy "Stopping Hardware Abstraction Layer"
    [ -f /var/run/hald.pid ] && kill `cat /var/run/hald.pid` &> /dev/null
    if [ $? -gt 0 ]; then
        stat_fail
    else
        rm_daemon hal
        stat_done
    fi
    ;;
    restart)
        $0 stop
    sleep 1
        $0 start
        ;;
    *)
        echo "usage: $0 {start|stop|restart}"
    ;;
esac
exit 0

hal.install 

post_install() {
  getent group hal >/dev/null || usr/sbin/groupadd -g 82 hal
  getent group optical >/dev/null || usr/sbin/groupadd -g 93 optical
  getent group floppy >/dev/null || usr/sbin/groupadd -g 94 floppy
  getent group storage >/dev/null || usr/sbin/groupadd -g 95 storage
  getent passwd hal >/dev/null || usr/sbin/useradd -c 'HAL daemon' -u 82 -g hal -G optical,floppy,storage -d '/' -s /bin/false hal
  usr/bin/passwd -l hal &>/dev/null
}

# arg 1:  the new package version
# arg 2:  the old package version
post_upgrade() {
  post_install $1
}

# arg 1:  the old package version
pre_remove() {
  usr/sbin/userdel hal &>/dev/null
  usr/sbin/groupdel hal &>/dev/null
}

op=$1
shift

$op $*

hal.udev.rules 

# send all events to HAL
RUN+="socket:/org/freedesktop/hal/udev_event"

storage-policy.fdi.patch 

--- fdi/policy/10osvendor/10-storage-policy.fdi    2006-01-17 01:25:33.000000000 +0100
+++ fdi/policy/10osvendor/10-storage-policy.fdi    2006-01-26 03:59:04.000000000 +0100
@@ -7,9 +7,10 @@
     <match key="info.udi" string="/org/freedesktop/Hal/devices/computer">
       <merge key="storage.policy.default.mount_root" type="string">/media</merge>
       <merge key="storage.policy.default.use_managed_keyword" type="bool">true</merge>
-      <merge key="storage.policy.default.managed_keyword.primary" type="string">managed</merge>
+      <merge key="storage.policy.default.managed_keyword.primary" type="string">comment=managed</merge>
       <merge key="storage.policy.default.managed_keyword.secondary" type="string">kudzu</merge>
-      <merge key="storage.policy.default.mount_option.noauto" type="bool">true</merge>
+      <merge key="storage.policy.default.mount_option.pamconsole" type="bool">false</merge>
+      <merge key="storage.policy.default.mount_option.user" type="bool">true</merge>
       <merge key="storage.policy.default.mount_option.pamconsole" type="bool">true</merge>
       <merge key="storage.policy.default.mount_option.exec" type="bool">true</merge>
     </match>
@@ -51,7 +52,7 @@
     <merge key="storage.policy.mount_filesystem" type="string">auto</merge>
     <merge key="storage.policy.desired_mount_point" type="string">cdrom</merge>
     <match key="storage.cdrom.cdr" bool="true">
-      <merge key="storage.policy.desired_mount_point" type="string">cdrecorder</merge>
+      <merge key="storage.policy.desired_mount_point" type="string">cdwriter</merge>
     </match>
     <match key="storage.cdrom.cdrw" bool="true">
       <merge key="storage.policy.desired_mount_point" type="string">cdrecorder</merge>
@@ -60,16 +61,16 @@
       <merge key="storage.policy.desired_mount_point" type="string">dvdrecorder</merge>
     </match>
     <match key="storage.cdrom.dvdplusrw" bool="true">
-      <merge key="storage.policy.desired_mount_point" type="string">dvdrecorder</merge>
+      <merge key="storage.policy.desired_mount_point" type="string">dvdwriter</merge>
     </match>
     <match key="storage.cdrom.dvdram" bool="true">
-      <merge key="storage.policy.desired_mount_point" type="string">dvdrecorder</merge>
+      <merge key="storage.policy.desired_mount_point" type="string">dvdwriter</merge>
     </match>
     <match key="storage.cdrom.dvdr" bool="true">
-      <merge key="storage.policy.desired_mount_point" type="string">dvdrecorder</merge>
+      <merge key="storage.policy.desired_mount_point" type="string">dvdwriter</merge>
     </match>
     <match key="storage.cdrom.dvdrw" bool="true">
-      <merge key="storage.policy.desired_mount_point" type="string">dvdrecorder</merge>
+      <merge key="storage.policy.desired_mount_point" type="string">dvdwriter</merge>
     </match>
       </match>
 
@@ -96,6 +97,9 @@
     <match key="block.is_volume" bool="true">
       <match key="volume.fsusage" string="filesystem">
     <!-- skip for drives with the no partitions hint (they are handled above) -->
+        <match key="@block.storage_device:storage.no_partitions_hint" bool="true">
+          <merge key="volume.policy.desired_mount_point" type="copy_property">@block.storage_device:storage.policy.desired_mount_point</merge>
+        </match>
     <match key="@block.storage_device:storage.no_partitions_hint" bool="false">
 
       <merge key="volume.policy.should_mount" type="bool">true</merge>

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#9 2006-01-26 08:02:01

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: gnome-power-manager

Nice one, Gandalf. Two suggestions - if you add 

--with-dbus-sys=/etc/dbus-1/system.d --with-dbus-services=/usr/share/dbus-1/services

to the power-manager ./configure, you can get rid of that install command at the end of your PKGBUILD. Also, you only need hal and libnotify in the depends line - hal depends on dbus.

Offline

#10 2006-01-26 12:47:54

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

Thx for the suggestion smile
anyway i'm working since yesterday on it and i still have the same thing, when i click on sleep nothing happens it's driving me nuts sad I even tried using powersave from unstable but it didnt work, now i will continue my research on their mailing list smile

[EDIT]

Richard Hughes wrote:

- We now depend on HAL 0.5.6 for the new suspend, hibernate and shutdown
functionality. HAL 0.5.6 is available in my repo for FC4.

from http://mail.gnome.org/archives/gnome-po … 00058.html
so i guess there is no use for me to continue on hal 0.5.5.1 i have to get 0.5.6 working!!
[/EDIT]

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#11 2006-01-26 13:50:04

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

News: yesterday they have released version 2.13.5 i installed Hal 0.5.6 and it runs on it, but it still doesnt work sad:(:(

New Files
PKGBUILD 

# Maintainer: Wael Nasreddine <wael_nasreddine@hotmail.com>

pkgname=gnome-power-manager
pkgver=2.13.5
pkgrel=1
pkgdesc="Power Manager for gnome"
url="http://www.gnome.org/projects/gnome-power-manager/"
depends=('hal' 'libnotify')
makedepends=()
source=(http://ftp.gnome.org/pub/GNOME/sources/gnome-power-manager/2.13/$pkgname-$pkgver.tar.gz)
install=gnome-power-manager.install
md5sums=('fd9bf98f404dd774e3fd80430843cba2')

build() {
  cd $startdir/src/$pkgname-$pkgver
  ./configure --prefix=/opt/gnome --disable-schemas-install --disable-libnotify --disable-scrollkeeper 
           --with-dbus-sys=/etc/dbus-1/system.d --with-dbus-services=/usr/share/dbus-1/services
  make || return 1
  make GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 DESTDIR=${startdir}/pkg install || return 1 

#  install -D -m644 $startdir/pkg/opt/gnome/etc/dbus-1/system.d/gnome-power-manager.conf 
#          $startdir/pkg/etc/dbus-1/system.d/gnome-power-manager.conf || return 1
}

gnome-power-manager.install 

pkgname=gnome-power-manager

post_install() {
  schemas=(`pacman -Ql $pkgname | grep 'gconf/schemas/.*schemas$' | awk '{ print $2 }'`)
  scrolls=(`pacman -Ql $pkgname | grep 'share/omf/.*.omf$' | awk '{ print $2 }'`)

  export GCONF_CONFIG_SOURCE=`opt/gnome/bin/gconftool-2 --get-default-source`
  for schema in "${schemas[@]}" ; do
    opt/gnome/bin/gconftool-2 --makefile-install-rule "$schema" >/dev/null 2>&1
  done

  for scroll in "${scrolls[@]}" ; do
    scrollkeeper-install -q -p var/lib/scrollkeeper "$scroll"
  done

  kill -s HUP `pidof /opt/gnome/bin/gconfd-2` >/dev/null 2>&1
  update-desktop-database -q
}

pre_upgrade() {
  pre_remove $1
}

post_upgrade() {
  post_install $1
}

pre_remove() {
  schemas=(`pacman -Ql $pkgname | grep 'gconf/schemas/.*schemas$' | awk '{ print $2 }'`)
  scrolls=(`pacman -Ql $pkgname | grep 'share/omf/.*.omf$' | awk '{ print $2 }'`)

  export GCONF_CONFIG_SOURCE=`opt/gnome/bin/gconftool-2 --get-default-source`
  for schema in "${schemas[@]}" ; do
    opt/gnome/bin/gconftool-2 --makefile-uninstall-rule "$schema" >/dev/null 2>&1
  done

  for scroll in "${scrolls[@]}" ; do
    scrollkeeper-uninstall -q -p var/lib/scrollkeeper "$scroll"
  done

  kill -s HUP `pidof /opt/gnome/bin/gconfd-2` >/dev/null 2>&1
}

post_remove() {
  update-desktop-database -q
}

op=$1
shift

$op $*

Please if soneone know what can be the reason why it's not working please tell me, i have suspend2 working and i also have powersave from unstable working!

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#12 2006-01-26 14:02:01

Blaasvis
Member
Registered: 2003-01-17
Posts: 467

Re: gnome-power-manager

well you won't have to continue this...
as soon a JGC releases hal 0.5.6 it will have all the support i need, and it will be added to unstable because it will depens on powersave..

Freedom is what i love

Offline

#13 2006-01-26 14:06:07

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

so for the moment i freeze gnome-power-manager untill hal 0.5.6 will be released?

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#14 2006-01-29 18:27:58

wiremore
Member
Registered: 2005-08-23
Posts: 43

Re: gnome-power-manager

hal .56 is out. maro made a package (its in the aur) which seems to work ok, but is a little out of date.

Offline

#15 2006-01-30 08:41:53

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

wiremore wrote:

hal .56 is out. maro made a package (its in the aur) which seems to work ok, but is a little out of date.

hmm i don't see any gnome-power-manager in AUR roll and i know that hal has been updated but it ain't working i have tried i am not sure why, but after i installed the new hal i have lost all hal-system-power-* scripts yikes

[My Blog] | [My Repo] | [My AUR Packages]

Offline

#16 2006-01-30 09:31:50

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: gnome-power-manager

It's here, Gandalf.

Offline

#17 2006-01-30 14:06:20

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: gnome-power-manager

hmmm it's weird, searching AUR for power-manager didn't work yikes
anyway thanks tomk smile

[My Blog] | [My Repo] | [My AUR Packages]

Offline

Pages: 1

Board footer

Powered by FluxBB