You are not logged in.
I don't think the instability of ath9k is solved at all. I can't speak for whether the connection is as weak as before (haven't really tested it), but the wifi card still regularly dies on me, reporting to dmesg what I quoted in a previous post:
https://bbs.archlinux.org/viewtopic.php … 8#p1278818
Offline
@AbtZ You may want to start another thread for this issue. This is quite different form the problems I was experiencing. It had weak reception, and frequent disconnection, which were fixed in recent Kernel release.
Last edited by hongster (2013-10-10 03:37:31)
Leong Hean Hong
http://about.me/hongster
Offline
Yeah, I get it. I just didn't know I was alone in experiencing that problem. I have frequent disconnects, like you reported, with the difference being that after a disconnect the wireless chip is dead for me until I reboot.
In any case, it's an upstream issue that's not directly related to Arch, so I'll try to go through other channels solving this issue.
Offline
I'm having this same issue. I recently reinstalled my entire system because of this issue, and it's still happening. I'm honestly not sure what to do about it because it occasionally causes my whole system to crash, especially when I'm on wireless.
EDIT: I managed to get this from dmesg, the issue is at the very end. It seems that this might also be causing Chromium to segfault.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda1 rw acpi_os_name=Linux acpi_backlight=vendor
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ffb0000-0x00000000a13affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a13b0000-0x00000000a9dbefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a9dbf000-0x00000000aaebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable
[ 0.000000] e820: update [mem 0x9ebf7018-0x9ec07057] usable ==> usable
[ 0.000000] e820: update [mem 0x9ebeb018-0x9ebf6057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x000000009ebeb017] usable
[ 0.000000] reserve setup_data: [mem 0x000000009ebeb018-0x000000009ebf6057] usable
[ 0.000000] reserve setup_data: [mem 0x000000009ebf6058-0x000000009ebf7017] usable
[ 0.000000] reserve setup_data: [mem 0x000000009ebf7018-0x000000009ec07057] usable
[ 0.000000] reserve setup_data: [mem 0x000000009ec07058-0x000000009ffaffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009ffb0000-0x00000000a13affff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000a13b0000-0x00000000a9dbefff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a9dbf000-0x00000000aaebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000024f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0xaaffe000 ACPI 2.0=0xaaffe014 SMBIOS=0xaaebef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f61000) (15MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f61000-0x0000000020000000) (480MB)
[ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fcfc000) (1020MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fcfc000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x000000009e3c0000) (483MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x000000009e3c0000-0x000000009e3e0000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009e3e0000-0x000000009ebeb000) (8MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000009ebeb000-0x000000009ec08000) (0MB)
[ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x000000009ec08000-0x000000009efd4000) (3MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000009efd4000-0x000000009ffb0000) (15MB)
[ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x000000009ffb0000-0x00000000a13b0000) (20MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a13b0000-0x00000000a13ba000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000a13ba000-0x00000000a13bb000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a13bb000-0x00000000a13bc000) (0MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000a13bc000-0x00000000a13bf000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000a13bf000-0x00000000a15a8000) (1MB)
[ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x00000000a15a8000-0x00000000a15bf000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000a15bf000-0x00000000a6931000) (83MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000a6931000-0x00000000a7467000) (11MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000a7467000-0x00000000a7468000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000a7468000-0x00000000a74ab000) (0MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000a74ab000-0x00000000a74ac000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000a74ac000-0x00000000a7900000) (4MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000a7900000-0x00000000a7902000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000a7902000-0x00000000a95bf000) (28MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000a95bf000-0x00000000a9a02000) (4MB)
[ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x00000000a9a02000-0x00000000a9dbf000) (3MB)
[ 0.000000] efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000a9dbf000-0x00000000a9f2c000) (1MB)
[ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000a9f2c000-0x00000000a9f2f000) (0MB)
[ 0.000000] efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000a9f2f000-0x00000000aa0b5000) (1MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000aa0b5000-0x00000000aa1bf000) (1MB)
[ 0.000000] efi: mem41: type=6, attr=0x800000000000000f, range=[0x00000000aa1bf000-0x00000000aa2ae000) (0MB)
[ 0.000000] efi: mem42: type=6, attr=0x800000000000000f, range=[0x00000000aa2ae000-0x00000000aa3bf000) (1MB)
[ 0.000000] efi: mem43: type=0, attr=0xf, range=[0x00000000aa3bf000-0x00000000aadf4000) (10MB)
[ 0.000000] efi: mem44: type=0, attr=0xf, range=[0x00000000aadf4000-0x00000000aaebf000) (0MB)
[ 0.000000] efi: mem45: type=10, attr=0xf, range=[0x00000000aaebf000-0x00000000aafa1000) (0MB)
[ 0.000000] efi: mem46: type=10, attr=0xf, range=[0x00000000aafa1000-0x00000000aafbf000) (0MB)
[ 0.000000] efi: mem47: type=9, attr=0xf, range=[0x00000000aafbf000-0x00000000aafe0000) (0MB)
[ 0.000000] efi: mem48: type=9, attr=0xf, range=[0x00000000aafe0000-0x00000000aafff000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x00000000aafff000-0x00000000ab000000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x0000000100000000-0x000000024f600000) (5366MB)
[ 0.000000] efi: mem51: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem52: type=0, attr=0x0, range=[0x00000000ab000000-0x00000000afa00000) (74MB)
[ 0.000000] efi: mem53: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem54: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem55: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem56: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem59: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x00000000ffc00000) (0MB)
[ 0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000ffc00000-0x00000000fff00000) (3MB)
[ 0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fff00000-0x00000000fff40000) (0MB)
[ 0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fff40000-0x0000000100000000) (0MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Inspiron 3521/0010T1, BIOS A09 06/25/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0A8000000 mask FFE000000 write-back
[ 0.000000] 4 base 0AA000000 mask FFF000000 write-back
[ 0.000000] 5 base 0FFA00000 mask FFFE00000 write-protect
[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 7 base 100000000 mask F00000000 write-back
[ 0.000000] 8 base 200000000 mask F80000000 write-back
[ 0.000000] 9 base 24F600000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b3f000, 0x02b3ffff] PGTABLE
[ 0.000000] BRK [0x02b40000, 0x02b40fff] PGTABLE
[ 0.000000] BRK [0x02b41000, 0x02b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24f400000-0x24f5fffff]
[ 0.000000] [mem 0x24f400000-0x24f5fffff] page 2M
[ 0.000000] BRK [0x02b42000, 0x02b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24c000000-0x24f3fffff]
[ 0.000000] [mem 0x24c000000-0x24f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x24bffffff]
[ 0.000000] [mem 0x200000000-0x24bffffff] page 2M
[ 0.000000] BRK [0x02b43000, 0x02b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x02b44000, 0x02b44fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0x9ffaffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0x9fdfffff] page 2M
[ 0.000000] [mem 0x9fe00000-0x9ffaffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa13b0000-0xa9dbefff]
[ 0.000000] [mem 0xa13b0000-0xa13fffff] page 4k
[ 0.000000] [mem 0xa1400000-0xa9bfffff] page 2M
[ 0.000000] [mem 0xa9c00000-0xa9dbefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaafff000-0xaaffffff]
[ 0.000000] [mem 0xaafff000-0xaaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fcfc000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000aaffe014 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000aaffe210 0000AC (v01 DELL CL09 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000aaffa000 00010C (v05 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: DSDT 00000000aafed000 0092F2 (v01 DELL CL09 00000000 ASL 00040000)
[ 0.000000] ACPI: FACS 00000000aafb9000 000040
[ 0.000000] ACPI: SLIC 00000000aaffd000 000176 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: UEFI 00000000aaffc000 000236 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: ASF! 00000000aaffb000 0000A5 (v32 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: HPET 00000000aaff9000 000038 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: APIC 00000000aaff8000 00008C (v03 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: MCFG 00000000aaff7000 00003C (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: SLIC 00000000aafec000 000176 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: SSDT 00000000aafeb000 0006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000aafe9000 000028 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: ASPT 00000000aafe7000 000034 (v07 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: DBGP 00000000aafe6000 000034 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: FPDT 00000000aafe4000 000044 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: SSDT 00000000aafe3000 0008E4 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000aafe2000 000A92 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
[ 0.000000] ACPI: DMAR 00000000aafe1000 0000B8 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: BGRT 00000000aafe0000 000038 (v01 DELL CL09 00000001 ASL 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x24f5fffff]
[ 0.000000] NODE_DATA [mem 0x24f5f1000-0x24f5f5fff]
[ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246c00000-ffff88024ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x24f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x9ffaffff]
[ 0.000000] node 0: [mem 0xa13b0000-0xa9dbefff]
[ 0.000000] node 0: [mem 0xaafff000-0xaaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x24f5fffff]
[ 0.000000] On node 0 totalpages: 2063686
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3975 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10719 pages used for memmap
[ 0.000000] DMA32 zone: 686015 pages, LIFO batch:31
[ 0.000000] Normal zone: 21464 pages used for memmap
[ 0.000000] Normal zone: 1373696 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ebeb000-0x9ebebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ebf6000-0x9ebf6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ebf7000-0x9ebf7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ec07000-0x9ec07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ffb0000-0xa13affff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa9dbf000-0xaaebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaaebf000-0xaafbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaafbf000-0xaaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88024f200000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2031417
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda1 rw acpi_os_name=Linux acpi_backlight=vendor
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7975736K/8254744K available (5271K kernel code, 836K rwdata, 1676K rodata, 1128K init, 1324K bss, 279008K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1795.855 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.36 BogoMIPS (lpj=5986183)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000022] init_memory_mapping: [mem 0xa9dbf000-0xa9f2efff]
[ 0.000025] [mem 0xa9dbf000-0xa9f2efff] page 4k
[ 0.000045] init_memory_mapping: [mem 0xa9f2f000-0xaa0b4fff]
[ 0.000046] [mem 0xa9f2f000-0xaa0b4fff] page 4k
[ 0.000062] init_memory_mapping: [mem 0xaa0b5000-0xaa1befff]
[ 0.000064] [mem 0xaa0b5000-0xaa1befff] page 4k
[ 0.000075] init_memory_mapping: [mem 0xaa1bf000-0xaa3befff]
[ 0.000077] [mem 0xaa1bf000-0xaa3befff] page 4k
[ 0.062881] Security Framework initialized
[ 0.062893] AppArmor: AppArmor disabled by boot time parameter
[ 0.062895] Yama: becoming mindful.
[ 0.063581] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.066475] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.067742] Mount-cache hash table entries: 256
[ 0.067962] Initializing cgroup subsys memory
[ 0.067970] Initializing cgroup subsys devices
[ 0.067972] Initializing cgroup subsys freezer
[ 0.067974] Initializing cgroup subsys net_cls
[ 0.067976] Initializing cgroup subsys blkio
[ 0.068003] CPU: Physical Processor ID: 0
[ 0.068004] CPU: Processor Core ID: 0
[ 0.068010] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.068532] mce: CPU supports 7 MCE banks
[ 0.068547] CPU0: Thermal monitoring enabled (TM1)
[ 0.068558] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
[ 0.068693] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
[ 0.070063] ACPI: Core revision 20131115
[ 0.070091] ACPI: Overriding _OS definition to 'Linux'
[ 0.076567] ACPI: All ACPI Tables successfully acquired
[ 0.093049] ftrace: allocating 21068 entries in 83 pages
[ 0.106314] dmar: Host address width 36
[ 0.106317] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.106325] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.106327] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.106333] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.106335] dmar: RMRR base: 0x000000aae8c000 end: 0x000000aaeabfff
[ 0.106336] dmar: RMRR base: 0x000000ab800000 end: 0x000000af9fffff
[ 0.106412] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.106413] HPET id 0 under DRHD base 0xfed91000
[ 0.106607] Enabled IRQ remapping in x2apic mode
[ 0.106610] Enabling x2apic
[ 0.106611] Enabled x2apic
[ 0.106617] Switched APIC routing to cluster x2apic.
[ 0.107089] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.140083] smpboot: CPU0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
[ 0.140093] TSC deadline timer enabled
[ 0.140107] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.140115] ... version: 3
[ 0.140116] ... bit width: 48
[ 0.140118] ... generic registers: 4
[ 0.140119] ... value mask: 0000ffffffffffff
[ 0.140120] ... max period: 0000ffffffffffff
[ 0.140121] ... fixed-purpose events: 3
[ 0.140123] ... event mask: 000000070000000f
[ 0.163544] x86: Booting SMP configuration:
[ 0.177341] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.163547] .... node #0, CPUs: #1 #2 #3
[ 0.218005] x86: Booted up 1 node, 4 CPUs
[ 0.218009] smpboot: Total of 4 processors activated (14372.45 BogoMIPS)
[ 0.222376] devtmpfs: initialized
[ 0.226097] PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
[ 0.227095] RTC time: 1:33:13, date: 03/31/14
[ 0.227140] NET: Registered protocol family 16
[ 0.227266] cpuidle: using governor ladder
[ 0.227267] cpuidle: using governor menu
[ 0.227303] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.227305] ACPI: bus type PCI registered
[ 0.227307] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.227389] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.227393] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.272259] PCI: Using configuration type 1 for base access
[ 0.272380] dmi type 0xB1 record - unknown flag
[ 0.273159] bio: create slab <bio-0> at 0
[ 0.273305] ACPI: Added _OSI(Module Device)
[ 0.273308] ACPI: Added _OSI(Processor Device)
[ 0.273309] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.273311] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.276777] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.292671] ACPI: SSDT 00000000aae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.293102] ACPI: Dynamic OEM Table Load:
[ 0.293104] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.302480] ACPI: SSDT 00000000aae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.302947] ACPI: Dynamic OEM Table Load:
[ 0.302950] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.314432] ACPI: SSDT 00000000aae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.314855] ACPI: Dynamic OEM Table Load:
[ 0.314857] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.326341] ACPI: Interpreter enabled
[ 0.326349] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.326355] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.326373] ACPI: (supports S0 S3 S4 S5)
[ 0.326375] ACPI: Using IOAPIC for interrupt routing
[ 0.326412] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.326569] ACPI: No dock devices found.
[ 0.550679] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.550686] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.550833] \_SB_.PCI0:_OSC invalid UUID
[ 0.550834] _OSC request data:1 1f 0
[ 0.550839] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.551346] PCI host bridge to bus 0000:00
[ 0.551350] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.551353] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.551355] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.551357] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.551359] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.551361] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.551364] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.551366] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.551368] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.551370] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.551372] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.551374] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.551376] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.551378] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.551380] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.551382] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.551384] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.551386] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[ 0.551396] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.551507] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.551522] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.551531] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.551537] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.551675] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.551704] pci 0000:00:14.0: reg 0x10: [mem 0xc0600000-0xc060ffff 64bit]
[ 0.551786] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.551852] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.551904] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.551932] pci 0000:00:16.0: reg 0x10: [mem 0xc0614000-0xc061400f 64bit]
[ 0.552020] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.552131] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.552157] pci 0000:00:1a.0: reg 0x10: [mem 0xc0619000-0xc06193ff]
[ 0.552262] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.552374] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.552394] pci 0000:00:1b.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit]
[ 0.552475] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.552566] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.552660] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.552729] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.552772] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.552863] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.552920] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.552975] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.553001] pci 0000:00:1d.0: reg 0x10: [mem 0xc0618000-0xc06183ff]
[ 0.553103] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.553173] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.553217] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.553414] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.553437] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.553448] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.553459] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.553469] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.553480] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.553491] pci 0000:00:1f.2: reg 0x24: [mem 0xc0617000-0xc06177ff]
[ 0.553546] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.553628] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.553649] pci 0000:00:1f.3: reg 0x10: [mem 0xc0615000-0xc06150ff 64bit]
[ 0.553675] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 0.553935] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.554007] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.554134] pci 0000:01:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 0.554213] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.554562] pci 0000:01:00.0: supports D1 D2
[ 0.554564] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.559075] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.559081] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.559090] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.559220] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.559275] pci 0000:02:00.0: reg 0x10: [mem 0xc0500000-0xc057ffff 64bit]
[ 0.559401] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.559517] pci 0000:02:00.0: supports D1 D2
[ 0.559519] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.565717] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.565725] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.636098] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.636163] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.636224] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.636284] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.636345] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.636405] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.636465] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.636525] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.636832] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.636840] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.636900] Found 1 acpi root devices
[ 0.636943] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.637034] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.637038] vgaarb: loaded
[ 0.637039] vgaarb: bridge control possible 0000:00:02.0
[ 0.637078] PCI: Using ACPI for IRQ routing
[ 0.644601] PCI: pci_cache_line_size set to 64 bytes
[ 0.644671] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.644673] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.644675] e820: reserve RAM buffer [mem 0x9ebeb018-0x9fffffff]
[ 0.644677] e820: reserve RAM buffer [mem 0x9ebf7018-0x9fffffff]
[ 0.644679] e820: reserve RAM buffer [mem 0x9ffb0000-0x9fffffff]
[ 0.644680] e820: reserve RAM buffer [mem 0xa9dbf000-0xabffffff]
[ 0.644683] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[ 0.644684] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
[ 0.644781] NetLabel: Initializing
[ 0.644783] NetLabel: domain hash size = 128
[ 0.644784] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.644799] NetLabel: unlabeled traffic allowed by default
[ 0.644823] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.644830] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.646859] Switched to clocksource hpet
[ 0.652039] pnp: PnP ACPI init
[ 0.652056] ACPI: bus type PNP registered
[ 0.652094] pnp 00:00: [dma 4]
[ 0.652121] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.652147] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.652257] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.652299] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.652347] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.652350] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.652352] system 00:04: [io 0xffff] has been reserved
[ 0.652354] system 00:04: [io 0xffff] has been reserved
[ 0.652357] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.652359] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.652362] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.652364] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.652366] system 00:04: [io 0xfd60-0xfd63] has been reserved
[ 0.652370] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.652402] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.652455] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.652459] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.652508] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.652544] pnp 00:08: Plug and Play ACPI device, IDs DLL0597 PNP0f13 (active)
[ 0.720350] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.720353] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.720355] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.720358] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.720360] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.720363] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.720365] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.720368] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[ 0.720370] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.720373] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.720375] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
[ 0.720378] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.720689] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[ 0.720692] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[ 0.720695] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.720714] pnp: PnP ACPI: found 11 devices
[ 0.720716] ACPI: bus type PNP unregistered
[ 0.727426] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.727459] pci 0000:00:1c.1: BAR 15: assigned [mem 0xafb00000-0xafbfffff pref]
[ 0.727462] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.727466] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.727476] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.727485] pci 0000:02:00.0: BAR 6: assigned [mem 0xafb00000-0xafb0ffff pref]
[ 0.727487] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.727494] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.727499] pci 0000:00:1c.1: bridge window [mem 0xafb00000-0xafbfffff pref]
[ 0.727507] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.727510] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.727512] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.727514] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.727516] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.727519] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.727521] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.727523] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.727525] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.727527] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.727529] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.727531] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.727534] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.727536] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.727538] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.727540] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.727542] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfeafffff]
[ 0.727545] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.727547] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.727549] pci_bus 0000:02: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.727552] pci_bus 0000:02: resource 2 [mem 0xafb00000-0xafbfffff pref]
[ 0.727585] NET: Registered protocol family 2
[ 0.727803] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.728001] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.728154] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.728176] TCP: reno registered
[ 0.728191] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.728229] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.728319] NET: Registered protocol family 1
[ 0.728333] pci 0000:00:02.0: Boot video device
[ 0.753634] PCI: CLS 64 bytes, default 64
[ 0.753686] Unpacking initramfs...
[ 0.825763] Freeing initrd memory: 3088K (ffff88007fcfc000 - ffff880080000000)
[ 0.825775] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.825778] software IO TLB [mem 0xa2931000-0xa6931000] (64MB) mapped at [ffff8800a2931000-ffff8800a6930fff]
[ 0.825810] Simple Boot Flag at 0x44 set to 0x1
[ 0.826025] Scanning for low memory corruption every 60 seconds
[ 0.826377] audit: initializing netlink socket (disabled)
[ 0.826395] type=2000 audit(1396229593.799:1): initialized
[ 0.843564] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.845062] zbud: loaded
[ 0.845269] VFS: Disk quotas dquot_6.5.2
[ 0.845315] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.845500] msgmni has been set to 15712
[ 0.845561] Key type big_key registered
[ 0.845836] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.845887] io scheduler noop registered
[ 0.845890] io scheduler deadline registered
[ 0.845921] io scheduler cfq registered (default)
[ 0.845968] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[ 0.846150] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[ 0.846310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.846329] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.846382] efifb: probing for efifb
[ 0.847165] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90021480000, using 4128k, total 4128k
[ 0.847167] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.847168] efifb: scrolling: redraw
[ 0.847170] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.851280] Console: switching to colour frame buffer device 170x48
[ 0.855171] fb0: EFI VGA frame buffer device
[ 0.855181] intel_idle: MWAIT substates: 0x21120
[ 0.855182] intel_idle: v0.4 model 0x3A
[ 0.855184] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.855335] GHES: HEST is not enabled!
[ 0.855402] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.855909] Linux agpgart interface v0.103
[ 0.855972] rtc_cmos 00:05: RTC can wake from S4
[ 0.856116] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.856150] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.856161] Intel P-state driver initializing.
[ 0.856172] Intel pstate controlling: cpu 0
[ 0.856188] Intel pstate controlling: cpu 1
[ 0.856199] Intel pstate controlling: cpu 2
[ 0.856211] Intel pstate controlling: cpu 3
[ 0.856322] drop_monitor: Initializing network drop monitor service
[ 0.856368] TCP: cubic registered
[ 0.856437] NET: Registered protocol family 10
[ 0.856563] NET: Registered protocol family 17
[ 0.856569] Key type dns_resolver registered
[ 0.856783] registered taskstats version 1
[ 0.857322] Magic number: 6:443:560
[ 0.857390] rtc_cmos 00:05: setting system clock to 2014-03-31 01:33:14 UTC (1396229594)
[ 0.857435] PM: Hibernation image not present or could not be loaded.
[ 0.858076] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 0.858077] Write protecting the kernel read-only data: 8192k
[ 0.859847] Freeing unused kernel memory: 860K (ffff880002529000 - ffff880002600000)
[ 0.860637] Freeing unused kernel memory: 372K (ffff8800027a3000 - ffff880002800000)
[ 0.870467] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.873612] systemd-udevd[56]: starting version 211
[ 0.886184] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.896818] ACPI: bus type USB registered
[ 0.896854] usbcore: registered new interface driver usbfs
[ 0.896867] usbcore: registered new interface driver hub
[ 0.896915] usbcore: registered new device driver usb
[ 0.897852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.898501] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.898508] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.898601] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.898626] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.898802] hub 1-0:1.0: USB hub found
[ 0.898812] hub 1-0:1.0: 4 ports detected
[ 0.899081] ehci-pci: EHCI PCI platform driver
[ 0.899280] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.899283] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.899714] hub 2-0:1.0: USB hub found
[ 0.899752] hub 2-0:1.0: 4 ports detected
[ 0.901328] SCSI subsystem initialized
[ 0.901719] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.901750] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.902433] libata version 3.00 loaded.
[ 0.916976] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.917002] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.917018] ehci-pci 0000:00:1a.0: debug port 2
[ 0.920918] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.920948] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000
[ 0.930205] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.930263] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.930420] hub 3-0:1.0: USB hub found
[ 0.930432] hub 3-0:1.0: 2 ports detected
[ 0.930711] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.930717] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.930731] ehci-pci 0000:00:1d.0: debug port 2
[ 0.934647] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.934672] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000
[ 0.943504] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.943767] hub 4-0:1.0: USB hub found
[ 0.943773] hub 4-0:1.0: 2 ports detected
[ 0.943867] ahci 0000:00:1f.2: version 3.0
[ 0.944006] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.956848] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.956852] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.963971] scsi0 : ahci
[ 0.964079] scsi1 : ahci
[ 0.964239] scsi2 : ahci
[ 0.964355] scsi3 : ahci
[ 0.964476] scsi4 : ahci
[ 0.964583] scsi5 : ahci
[ 0.964629] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 43
[ 0.964631] ata2: DUMMY
[ 0.964635] ata3: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617200 irq 43
[ 0.964637] ata4: DUMMY
[ 0.964638] ata5: DUMMY
[ 0.964640] ata6: DUMMY
[ 1.236812] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.283416] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.283471] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.287640] ata3.00: ATAPI: PLDS DVD+/-RW DU-8A5HH, SD11, max UDMA/100
[ 1.288784] ata3.00: configured for UDMA/100
[ 1.293004] ata1.00: ATA-8: ST500LT012-9WS142, 0002SDM1, max UDMA/133
[ 1.293011] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.333800] ata1.00: configured for UDMA/133
[ 1.334112] scsi 0:0:0:0: Direct-Access ATA ST500LT012-9WS14 0002 PQ: 0 ANSI: 5
[ 1.339879] scsi 2:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5HH SD11 PQ: 0 ANSI: 5
[ 1.345032] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.345038] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.345161] sd 0:0:0:0: [sda] Write Protect is off
[ 1.345167] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.345227] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.355965] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.355971] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.356244] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.360948] hub 3-1:1.0: USB hub found
[ 1.361120] hub 3-1:1.0: 6 ports detected
[ 1.427169] sda: sda1 sda2 sda3
[ 1.428339] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.466699] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.590938] hub 4-1:1.0: USB hub found
[ 1.591054] hub 4-1:1.0: 6 ports detected
[ 1.660016] usb 3-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.823217] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 1.826500] tsc: Refined TSC clocksource calibration: 1795.921 MHz
[ 1.848265] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.973348] usb 3-1.4: new high-speed USB device number 5 using ehci-pci
[ 2.480656] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 2.480909] systemd[1]: Detected architecture 'x86-64'.
[ 2.493811] systemd[1]: Set hostname to <Hilbert>.
[ 2.747303] random: nonblocking pool is initialized
[ 2.826357] Switched to clocksource tsc
[ 3.428449] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.428941] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.429032] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.429052] systemd[1]: Starting Remote File Systems.
[ 3.429224] systemd[1]: Reached target Remote File Systems.
[ 3.429242] systemd[1]: Starting Encrypted Volumes.
[ 3.429385] systemd[1]: Reached target Encrypted Volumes.
[ 3.429409] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.429460] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.429491] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.429779] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.429800] systemd[1]: Starting Swap.
[ 3.429914] systemd[1]: Reached target Swap.
[ 3.429929] systemd[1]: Starting EFI System Partition Automount.
[ 3.430149] systemd[1]: Set up automount EFI System Partition Automount.
[ 3.430169] systemd[1]: Expecting device dev-disk-by\x2duuid-48d467cf\x2d024b\x2d498c\x2db5d0\x2d715c3ef60347.device...
[ 3.430323] systemd[1]: Expecting device dev-disk-by\x2duuid-4965\x2d5EE6.device...
[ 3.430444] systemd[1]: Starting Root Slice.
[ 3.439758] systemd[1]: Created slice Root Slice.
[ 3.439778] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.439926] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.439941] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.440086] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.440100] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.440238] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.440253] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.440398] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.440418] systemd[1]: Starting udev Control Socket.
[ 3.440547] systemd[1]: Listening on udev Control Socket.
[ 3.440565] systemd[1]: Starting udev Kernel Socket.
[ 3.440692] systemd[1]: Listening on udev Kernel Socket.
[ 3.440707] systemd[1]: Starting User and Session Slice.
[ 3.441045] systemd[1]: Created slice User and Session Slice.
[ 3.441063] systemd[1]: Starting Journal Socket.
[ 3.441222] systemd[1]: Listening on Journal Socket.
[ 3.441246] systemd[1]: Starting System Slice.
[ 3.441562] systemd[1]: Created slice System Slice.
[ 3.441585] systemd[1]: Started File System Check on Root Device.
[ 3.441597] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.441951] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.441971] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.483042] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.494006] systemd[1]: Starting Apply Kernel Variables...
[ 3.494777] systemd[1]: Mounting Huge Pages File System...
[ 3.575907] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.576598] systemd[1]: Mounting Debug File System...
[ 3.577164] systemd[1]: Starting udev Coldplug all Devices...
[ 3.577891] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.579567] systemd[1]: Started Load Kernel Modules.
[ 3.579602] systemd[1]: Mounting Configuration File System...
[ 3.580058] systemd[1]: Mounted FUSE Control File System.
[ 3.580087] systemd[1]: Starting system-getty.slice.
[ 3.580391] systemd[1]: Created slice system-getty.slice.
[ 3.580419] systemd[1]: Starting Setup Virtual Console...
[ 3.580880] systemd[1]: Starting Journal Service...
[ 3.581513] systemd[1]: Started Journal Service.
[ 3.889255] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 4.033096] systemd-udevd[151]: starting version 212
[ 4.628687] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2
[ 4.628693] ACPI: Power Button [PWRB]
[ 4.628746] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 4.628776] ACPI: Lid Switch [LID0]
[ 4.628811] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.628813] ACPI: Power Button [PWRF]
[ 4.636624] ACPI: AC Adapter [ACAD] (off-line)
[ 4.707387] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 4.707395] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.707400] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.707404] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.707406] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.707409] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.707411] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.737557] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4.763688] wmi: Mapper loaded
[ 4.783639] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.841899] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[ 4.858721] platform microcode: Direct firmware load failed with error -2
[ 4.858724] platform microcode: Falling back to user helper
[ 4.881791] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.881862] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.881911] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.882226] ACPI Warning: 0x0000000000003040-0x000000000000305f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 4.882231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.882382] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 4.888678] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.895575] ACPI: Battery Slot [BAT1] (battery present)
[ 4.959085] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.964146] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[ 4.964160] platform microcode: Direct firmware load failed with error -2
[ 4.964162] platform microcode: Falling back to user helper
[ 4.992977] iTCO_vendor_support: vendor-support=0
[ 5.003187] [drm] Initialized drm 1.1.0 20060810
[ 5.015852] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.015882] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 5.015998] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.018443] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[ 5.018460] platform microcode: Direct firmware load failed with error -2
[ 5.018463] platform microcode: Falling back to user helper
[ 5.019712] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[ 5.019726] platform microcode: Direct firmware load failed with error -2
[ 5.019729] platform microcode: Falling back to user helper
[ 5.020544] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.039254] input: Dell WMI hotkeys as /devices/virtual/input/input10
[ 5.171632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.171641] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.171862] r8169 0000:01:00.0: irq 46 for MSI/MSI-X
[ 5.172002] r8169 0000:01:00.0 eth0: RTL8105e at 0xffffc90022ad6000, 74:86:7a:2c:7e:a5, XID 00c00000 IRQ 46
[ 5.238780] cfg80211: Calling CRDA to update world regulatory domain
[ 5.296529] [drm] Memory usable by graphics device = 2048M
[ 5.296533] checking generic (b0000000 408000) vs hw (b0000000 10000000)
[ 5.296534] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 5.220150] systemd-udevd[157]: renamed network interface eth0 to enp1s0
[ 5.296554] Console: switching
[ 5.296555] to colour dummy device 80x25
[ 5.315669] ath: phy0: Set BT/WLAN RX diversity capability
[ 5.324707] ath: phy0: Enable LNA combining
[ 5.325964] ath: phy0: ASPM enabled: 0x43
[ 5.325966] ath: EEPROM regdomain: 0x60
[ 5.325967] ath: EEPROM indicates we should expect a direct regpair map
[ 5.325968] ath: Country alpha2 being used: 00
[ 5.325969] ath: Regpair used: 0x60
[ 5.347069] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.347280] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90021900000, irq=17
[ 5.352072] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 5.352081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.352082] [drm] Driver supports precise vblank timestamp query.
[ 5.352183] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.445354] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 5.460007] fbcon: inteldrmfb (fb0) is primary device
[ 5.655065] Bluetooth: Core ver 2.17
[ 5.655077] NET: Registered protocol family 31
[ 5.655077] Bluetooth: HCI device and connection manager initialized
[ 5.655083] Bluetooth: HCI socket layer initialized
[ 5.655084] Bluetooth: L2CAP socket layer initialized
[ 5.655087] Bluetooth: SCO socket layer initialized
[ 5.662433] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2382, fw id: 1238635
[ 5.733384] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 5.797582] media: Linux media interface: v0.10
[ 5.808078] usbcore: registered new interface driver btusb
[ 5.827190] systemd-udevd[165]: renamed network interface wlan0 to wlp2s0
[ 5.827190] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.830805] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 5.830972] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 5.830977] usbcore: registered new interface driver rts5139
[ 5.913580] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5.913639] usbcore: registered new interface driver ath3k
[ 5.931291] mousedev: PS/2 mouse device common for all mice
[ 6.040873] usb 3-1.1: USB disconnect, device number 3
[ 6.131904] Console: switching to colour frame buffer device 170x48
[ 6.139557] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.139563] i915 0000:00:02.0: registered panic notifier
[ 6.152632] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.152737] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 6.152843] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.176551] Linux video capture interface: v2.00
[ 6.225291] usb 3-1.1: new full-speed USB device number 6 using ehci-pci
[ 6.385188] intel_rapl: domain uncore energy ctr 216760:216760 not working, skip
[ 6.623049] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (064e:8132)
[ 6.648704] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input12
[ 6.648780] usbcore: registered new interface driver uvcvideo
[ 6.648782] USB Video Class driver (1.1.1)
[ 7.358443] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 7.472685] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 7.632779] systemd-journald[132]: Received request to flush runtime journal from PID 1
[ 12.109661] r8169 0000:01:00.0 enp1s0: link down
[ 12.109692] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 12.124055] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 13.254807] wlp2s0: authenticate with ec:1a:59:34:7a:ee
[ 13.270254] wlp2s0: send auth to ec:1a:59:34:7a:ee (try 1/3)
[ 13.272391] wlp2s0: authenticated
[ 13.272912] wlp2s0: associate with ec:1a:59:34:7a:ee (try 1/3)
[ 13.275867] wlp2s0: RX AssocResp from ec:1a:59:34:7a:ee (capab=0x411 status=0 aid=1)
[ 13.276043] wlp2s0: associated
[ 13.276072] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 33.643515] fuse init (API version 7.22)
[ 876.152565] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 876.164074] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 876.195998] ath: phy0: Failed to wakeup in 500us
[ 876.311767] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 876.323336] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 876.334293] ath: phy0: Failed to wakeup in 500us
[ 876.399051] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 876.410640] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 876.410661] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 876.525482] ath: phy0: Chip reset failed
[ 876.525485] ath: phy0: Unable to reset channel, reset status -22
[ 876.525553] ath: phy0: Unable to set channel
[ 876.525686] cfg80211: Calling CRDA to update world regulatory domain
[ 876.590790] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 876.602318] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 876.602325] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 876.717778] ath: phy0: Chip reset failed
[ 876.717780] ath: phy0: Unable to reset channel, reset status -22
[ 876.782608] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 876.794138] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 876.794146] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 876.908917] ath: phy0: Chip reset failed
[ 876.908920] ath: phy0: Unable to reset channel, reset status -22
[ 876.908943] ath: phy0: Unable to set channel
[ 876.974007] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 876.985551] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 876.985558] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 877.100812] ath: phy0: Chip reset failed
[ 877.100815] ath: phy0: Unable to reset channel, reset status -22
[ 877.100843] ath: phy0: Unable to set channel
[ 877.165563] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 877.177105] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 877.177112] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 877.291957] ath: phy0: Chip reset failed
[ 877.291962] ath: phy0: Unable to reset channel, reset status -22
[ 877.291971] ath: phy0: Unable to set channel
[ 877.356839] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 877.368382] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 877.368389] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 877.483241] ath: phy0: Chip reset failed
[ 877.483244] ath: phy0: Unable to reset channel, reset status -22
[ 877.483269] ath: phy0: Unable to set channel
[ 877.548158] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 877.559726] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 877.559733] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 877.674620] ath: phy0: Chip reset failed
[ 877.674622] ath: phy0: Unable to reset channel, reset status -22
[ 877.674636] ath: phy0: Unable to set channel
[ 877.739371] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 877.750908] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 877.750916] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 877.865613] ath: phy0: Chip reset failed
[ 877.865615] ath: phy0: Unable to reset channel, reset status -22
[ 877.865632] ath: phy0: Unable to set channel
[ 877.930380] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 877.941901] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 877.941908] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 878.056684] ath: phy0: Chip reset failed
[ 878.056688] ath: phy0: Unable to reset channel, reset status -22
[ 878.056698] ath: phy0: Unable to set channel
[ 878.121416] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 878.132947] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 878.132954] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 878.247572] ath: phy0: Chip reset failed
[ 878.247574] ath: phy0: Unable to reset channel, reset status -22
[ 878.247593] ath: phy0: Unable to set channel
[ 878.312387] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 878.323917] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 878.323924] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 878.909046] wlp2s0: authenticate with ec:1a:59:34:7a:ee
[ 878.924000] wlp2s0: send auth to ec:1a:59:34:7a:ee (try 1/3)
[ 878.926183] wlp2s0: authenticated
[ 878.927938] wlp2s0: associate with ec:1a:59:34:7a:ee (try 1/3)
[ 878.930946] wlp2s0: RX AssocResp from ec:1a:59:34:7a:ee (capab=0x411 status=0 aid=1)
[ 878.931424] wlp2s0: associated
[ 907.530560] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 907.542110] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 907.542144] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 907.657451] ath: phy0: Chip reset failed
[ 907.657455] ath: phy0: Unable to reset channel, reset status -22
[ 907.722570] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 907.734097] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 907.734105] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 907.849444] ath: phy0: Chip reset failed
[ 907.849455] ath: phy0: Unable to reset channel, reset status -22
[ 907.914429] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 907.925935] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 907.925943] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 908.041077] ath: phy0: Chip reset failed
[ 908.041082] ath: phy0: Unable to reset channel, reset status -22
[ 908.106654] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 908.118236] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 908.118245] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 908.233565] ath: phy0: Chip reset failed
[ 908.233568] ath: phy0: Unable to reset channel, reset status -22
[ 908.348192] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 908.359591] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 908.370421] ath: phy0: Failed to wakeup in 500us
[ 908.484307] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 908.495702] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 908.495922] cfg80211: Calling CRDA to update world regulatory domain
[ 908.506643] ath: phy0: Failed to wakeup in 500us
[ 908.571142] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 908.582667] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 908.582674] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 908.697349] ath: phy0: Chip reset failed
[ 908.697351] ath: phy0: Unable to reset channel, reset status -22
[ 908.697369] ath: phy0: Unable to set channel
[ 908.762171] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 908.773706] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 908.773714] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 908.888314] ath: phy0: Chip reset failed
[ 908.888320] ath: phy0: Unable to reset channel, reset status -22
[ 908.953207] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 908.964746] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 908.964753] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 909.079606] ath: phy0: Chip reset failed
[ 909.079610] ath: phy0: Unable to reset channel, reset status -22
[ 909.079635] ath: phy0: Unable to set channel
[ 909.144409] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 909.155942] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 909.155949] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 909.270719] ath: phy0: Chip reset failed
[ 909.270724] ath: phy0: Unable to reset channel, reset status -22
[ 909.270735] ath: phy0: Unable to set channel
[ 909.335604] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 909.347130] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 909.347137] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 909.461987] ath: phy0: Chip reset failed
[ 909.461991] ath: phy0: Unable to reset channel, reset status -22
[ 909.462001] ath: phy0: Unable to set channel
[ 909.526830] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 909.538372] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 909.538379] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 909.653116] ath: phy0: Chip reset failed
[ 909.653119] ath: phy0: Unable to reset channel, reset status -22
[ 909.653129] ath: phy0: Unable to set channel
[ 909.717900] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 909.729430] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 909.729437] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 909.844098] ath: phy0: Chip reset failed
[ 909.844101] ath: phy0: Unable to reset channel, reset status -22
[ 909.844109] ath: phy0: Unable to set channel
[ 909.909003] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 909.920558] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 909.920565] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 910.035337] ath: phy0: Chip reset failed
[ 910.035341] ath: phy0: Unable to reset channel, reset status -22
[ 910.035349] ath: phy0: Unable to set channel
[ 910.100157] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 910.111683] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 910.111690] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 910.226354] ath: phy0: Chip reset failed
[ 910.226356] ath: phy0: Unable to reset channel, reset status -22
[ 910.226378] ath: phy0: Unable to set channel
[ 910.291355] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 910.302885] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 910.302892] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 910.417617] ath: phy0: Chip reset failed
[ 910.417620] ath: phy0: Unable to reset channel, reset status -22
[ 910.417628] ath: phy0: Unable to set channel
[ 910.482381] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 910.493904] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 910.493911] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 910.608787] ath: phy0: Chip reset failed
[ 910.608791] ath: phy0: Unable to reset channel, reset status -22
[ 910.608800] ath: phy0: Unable to set channel
[ 910.673770] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 910.685318] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 910.685325] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 910.800169] ath: phy0: Chip reset failed
[ 910.800173] ath: phy0: Unable to reset channel, reset status -22
[ 910.800181] ath: phy0: Unable to set channel
[ 910.865107] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 910.876725] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 910.876740] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 910.991533] ath: phy0: Chip reset failed
[ 910.991536] ath: phy0: Unable to reset channel, reset status -22
[ 910.991545] ath: phy0: Unable to set channel
[ 911.056430] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 911.067976] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 911.067983] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 911.182764] ath: phy0: Chip reset failed
[ 911.182766] ath: phy0: Unable to reset channel, reset status -22
[ 911.182777] ath: phy0: Unable to set channel
[ 911.247539] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 911.259076] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 911.259083] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 911.373792] ath: phy0: Chip reset failed
[ 911.373795] ath: phy0: Unable to reset channel, reset status -22
[ 911.373804] ath: phy0: Unable to set channel
[ 911.438665] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 911.450197] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 911.450205] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 911.565061] ath: phy0: Chip reset failed
[ 911.565065] ath: phy0: Unable to reset channel, reset status -22
[ 911.565075] ath: phy0: Unable to set channel
[ 911.629994] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 911.641543] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 911.641550] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 911.756319] ath: phy0: Chip reset failed
[ 911.756324] ath: phy0: Unable to reset channel, reset status -22
[ 911.756334] ath: phy0: Unable to set channel
[ 911.870649] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 911.882042] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 911.892684] ath: phy0: Failed to wakeup in 500us
[ 912.006627] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 912.018029] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 917.570633] wlp2s0: authenticate with ec:1a:59:34:7a:ee
[ 917.587965] wlp2s0: send auth to ec:1a:59:34:7a:ee (try 1/3)
[ 917.590410] wlp2s0: authenticated
[ 917.592249] wlp2s0: associate with ec:1a:59:34:7a:ee (try 1/3)
[ 917.595193] wlp2s0: RX AssocResp from ec:1a:59:34:7a:ee (capab=0x411 status=0 aid=1)
[ 917.595606] wlp2s0: associated
[ 997.506517] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 997.518104] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 997.518125] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 997.633234] ath: phy0: Chip reset failed
[ 997.633238] ath: phy0: Unable to reset channel, reset status -22
[ 997.698607] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 997.710159] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 997.710167] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 997.825560] ath: phy0: Chip reset failed
[ 997.825564] ath: phy0: Unable to reset channel, reset status -22
[ 997.890470] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 997.902026] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 997.902033] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 998.016903] ath: phy0: Chip reset failed
[ 998.016908] ath: phy0: Unable to reset channel, reset status -22
[ 998.081712] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 998.093237] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 998.093244] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 998.208117] ath: phy0: Chip reset failed
[ 998.208120] ath: phy0: Unable to reset channel, reset status -22
[ 998.273293] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 998.284856] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 998.284864] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 998.399890] ath: phy0: Chip reset failed
[ 998.399895] ath: phy0: Unable to reset channel, reset status -22
[ 998.465170] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 998.476699] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 998.476706] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 998.592091] ath: phy0: Chip reset failed
[ 998.592095] ath: phy0: Unable to reset channel, reset status -22
[ 998.657031] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 998.668574] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 998.668582] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1000.070257] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 1000.081653] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1000.092266] ath: phy0: Failed to wakeup in 500us
[ 1000.206023] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 1000.217402] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1000.228022] ath: phy0: Failed to wakeup in 500us
[ 1000.341872] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 1000.353290] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1000.363999] ath: phy0: Failed to wakeup in 500us
[ 1000.429013] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1000.440599] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1000.440623] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1000.556002] ath: phy0: Chip reset failed
[ 1000.556006] ath: phy0: Unable to reset channel, reset status -22
[ 1000.556035] ath: phy0: Unable to set channel
[ 1000.556172] cfg80211: Calling CRDA to update world regulatory domain
[ 1000.620972] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1000.632526] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1000.632533] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1000.747458] ath: phy0: Chip reset failed
[ 1000.747463] ath: phy0: Unable to reset channel, reset status -22
[ 1000.812503] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1000.824027] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1000.824036] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1000.939009] ath: phy0: Chip reset failed
[ 1000.939013] ath: phy0: Unable to reset channel, reset status -22
[ 1000.939023] ath: phy0: Unable to set channel
[ 1001.003962] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1001.015469] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1001.015477] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1001.130527] ath: phy0: Chip reset failed
[ 1001.130532] ath: phy0: Unable to reset channel, reset status -22
[ 1001.130548] ath: phy0: Unable to set channel
[ 1001.195450] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1001.206958] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1001.206965] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1001.321874] ath: phy0: Chip reset failed
[ 1001.321878] ath: phy0: Unable to reset channel, reset status -22
[ 1001.321898] ath: phy0: Unable to set channel
[ 1001.386939] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1001.398454] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1001.398461] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1001.513459] ath: phy0: Chip reset failed
[ 1001.513464] ath: phy0: Unable to reset channel, reset status -22
[ 1001.513473] ath: phy0: Unable to set channel
[ 1001.578356] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1001.589885] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1001.589893] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1001.704829] ath: phy0: Chip reset failed
[ 1001.704833] ath: phy0: Unable to reset channel, reset status -22
[ 1001.704842] ath: phy0: Unable to set channel
[ 1001.769813] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1001.781309] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1001.781317] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1001.896287] ath: phy0: Chip reset failed
[ 1001.896291] ath: phy0: Unable to reset channel, reset status -22
[ 1001.896299] ath: phy0: Unable to set channel
[ 1001.961149] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1001.972674] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1001.972682] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1002.087636] ath: phy0: Chip reset failed
[ 1002.087641] ath: phy0: Unable to reset channel, reset status -22
[ 1002.087669] ath: phy0: Unable to set channel
[ 1002.152507] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1002.164020] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1002.164028] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1002.278971] ath: phy0: Chip reset failed
[ 1002.278974] ath: phy0: Unable to reset channel, reset status -22
[ 1002.278981] ath: phy0: Unable to set channel
[ 1002.343874] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1002.355401] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1002.355410] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1002.470308] ath: phy0: Chip reset failed
[ 1002.470313] ath: phy0: Unable to reset channel, reset status -22
[ 1002.470322] ath: phy0: Unable to set channel
[ 1002.535157] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1002.546626] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1002.546634] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1002.661621] ath: phy0: Chip reset failed
[ 1002.661625] ath: phy0: Unable to reset channel, reset status -22
[ 1002.661635] ath: phy0: Unable to set channel
[ 1002.726553] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1002.737995] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1002.738002] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1002.853012] ath: phy0: Chip reset failed
[ 1002.853015] ath: phy0: Unable to reset channel, reset status -22
[ 1002.853025] ath: phy0: Unable to set channel
[ 1002.918114] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1002.929565] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1002.929575] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1003.044723] ath: phy0: Chip reset failed
[ 1003.044727] ath: phy0: Unable to reset channel, reset status -22
[ 1003.044743] ath: phy0: Unable to set channel
[ 1003.110001] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1003.121548] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1003.121555] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1003.236986] ath: phy0: Chip reset failed
[ 1003.236990] ath: phy0: Unable to reset channel, reset status -22
[ 1003.237026] ath: phy0: Unable to set channel
[ 1003.302067] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1003.313524] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1003.313532] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1003.428468] ath: phy0: Chip reset failed
[ 1003.428472] ath: phy0: Unable to reset channel, reset status -22
[ 1003.428491] ath: phy0: Unable to set channel
[ 1003.493420] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1003.504874] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1003.504881] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1003.619843] ath: phy0: Chip reset failed
[ 1003.619846] ath: phy0: Unable to reset channel, reset status -22
[ 1003.619856] ath: phy0: Unable to set channel
[ 1003.733977] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 1003.745387] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1003.756005] ath: phy0: Failed to wakeup in 500us
[ 1003.870053] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[ 1003.881444] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1005.044968] ath: phy0: Failed to wakeup in 500us
[ 1009.430470] wlp2s0: authenticate with ec:1a:59:34:7a:ee
[ 1009.446430] wlp2s0: send auth to ec:1a:59:34:7a:ee (try 1/3)
[ 1009.448516] wlp2s0: authenticated
[ 1009.449720] wlp2s0: associate with ec:1a:59:34:7a:ee (try 1/3)
[ 1009.452615] wlp2s0: RX AssocResp from ec:1a:59:34:7a:ee (capab=0x411 status=0 aid=1)
[ 1009.452848] wlp2s0: associated
[ 1183.373556] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[ 1183.486940] ath: phy0: Unable to reset channel, reset status -5
[ 1183.487087] ath: phy0: Unable to set channel
[ 1183.551594] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1183.563137] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1183.563147] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1183.677829] ath: phy0: Chip reset failed
[ 1183.677833] ath: phy0: Unable to reset channel, reset status -22
[ 1183.742618] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1183.754150] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1183.754158] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1183.868896] ath: phy0: Chip reset failed
[ 1183.868900] ath: phy0: Unable to reset channel, reset status -22
[ 1183.892941] psmouse serio1: resync failed, issuing reconnect request
[ 1183.934118] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1183.945669] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1183.945676] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1184.061186] ath: phy0: Chip reset failed
[ 1184.061190] ath: phy0: Unable to reset channel, reset status -22
[ 1184.126157] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[ 1184.137689] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[ 1184.137698] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 1195.374606] Watchdog[776]: segfault at 0 ip 00007f669d7b1ed8 sp 00007f66881517d0 error 6 in chromium[7f6699f96000+535e000]
[ 1196.529598] systemd-journald[132]: Failed to write entry (26 items, 329081748 bytes) despite vacuuming, ignoring: Argument list too long
[ 1205.742550] Watchdog[4408]: segfault at 0 ip 00007f1666595ed8 sp 00007f1650f357d0 error 6 in chromium[7f1662d7a000+535e000]Last edited by chrisp1090 (2014-03-31 02:00:53)
Offline