You are not logged in.

#1 2014-04-05 10:57:07

Gulver
Member
Registered: 2013-05-24
Posts: 208

A Microcode Returning Error at Inıt Proc [Solved]

It probably is something harmless since my dmesg is full of errors of unimportance here and there, this one I wonder about it anyway.

[    9.238827] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    9.619484] platform microcode: Direct firmware load failed with error -2
[    9.619488] platform microcode: Falling back to user helper
[   10.284928] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[   10.284941] platform microcode: Direct firmware load failed with error -2
[   10.284941] platform microcode: Falling back to user helper
[   10.329959] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[   10.329973] platform microcode: Direct firmware load failed with error -2
[   10.329974] platform microcode: Falling back to user helper
[   10.330678] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[   10.330689] platform microcode: Direct firmware load failed with error -2
[   10.330690] platform microcode: Falling back to user helper
[   10.331413] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

Last edited by Gulver (2014-04-05 16:35:31)

Offline

#2 2014-04-05 13:26:44

agapito
Member
From: Who cares.
Registered: 2008-11-13
Posts: 641

Re: A Microcode Returning Error at Inıt Proc [Solved]

Install intel-ucodes package.

https://wiki.archlinux.org/index.php/microcode

Last edited by agapito (2014-04-05 13:27:09)


Excuse my poor English.

Offline

#3 2014-04-05 15:46:26

Gulver
Member
Registered: 2013-05-24
Posts: 208

Re: A Microcode Returning Error at Inıt Proc [Solved]

That fixed it. Gracias smile

Offline

#4 2014-04-05 15:54:06

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,414

Re: A Microcode Returning Error at Inıt Proc [Solved]

Gulver wrote:

That fixed it. Gracias smile

Don't forget to mark the thread as [Solved].

Offline

Board footer

Powered by FluxBB