You are not logged in.
- Topics: Active | Unanswered
#1 2014-05-29 05:48:25
- subnex
- Member
- Registered: 2009-08-10
- Posts: 15
KDE - keyboard unresponsive when changing tty
Hello
I have a problem with kde. very often (like 80% of the time or so) when i change tty, or suspend and resume, X uses 50 - 100% cpu and the keyboard does not respond. Sometimes keyboard response returns after leaving the system idle for longer periods, other times i have to restart X.
The problem only seems to appear in KDE. Gnome3, LXDE and LXQt don't have any problems. I furthermore tried to use openbox as WM in KDE, but the problem persists. I do not use kwin compositing though.
My pc is a lenovo T500,
#lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)My 20-intel.conf looks like:
/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna" # options: sna, uxa, glamor
#Option "DRI" "False" # disable 3D acceleration
#Option "NoAccel" "True" # True disables gpu usage
#Option "TearFree" "True" # Should work with sna
EndSection% I have played with the different options, but the result does not change.
I can't find any relevant information in my Xorg.0.log, but here it is anyway:
[ 2241.937]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 2241.937] X Protocol Version 11, Revision 0
[ 2241.937] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 2241.937] Current Operating System: Linux mugpahug-laptop 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 2241.937] Kernel command line: root=/dev/sda5 zswap.enabled=1 zswap.compressor=lz4 resume=UUID=f4782f63-1c58-4d36-82f5-fa17d89010a6 rw ipv6.disable=1 logo.nologo quiet
[ 2241.937] Build Date: 14 April 2014 08:39:09AM
[ 2241.937]
[ 2241.937] Current version of pixman: 0.32.4
[ 2241.937] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2241.937] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2241.937] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 29 15:30:02 2014
[ 2241.937] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2241.937] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2241.938] (==) No Layout section. Using the first Screen section.
[ 2241.938] (==) No screen section available. Using defaults.
[ 2241.938] (**) |-->Screen "Default Screen Section" (0)
[ 2241.938] (**) | |-->Monitor "<default monitor>"
[ 2241.938] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2241.938] (**) | |-->Device "Intel Graphics"
[ 2241.938] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2241.938] (==) Automatically adding devices
[ 2241.938] (==) Automatically enabling devices
[ 2241.938] (==) Automatically adding GPU devices
[ 2241.938] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2241.938] Entry deleted from font path.
[ 2241.938] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2241.938] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
[ 2241.938] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2241.938] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2241.938] (II) Loader magic: 0x804c80
[ 2241.938] (II) Module ABI versions:
[ 2241.938] X.Org ANSI C Emulation: 0.4
[ 2241.938] X.Org Video Driver: 15.0
[ 2241.938] X.Org XInput driver : 20.0
[ 2241.938] X.Org Server Extension : 8.0
[ 2241.938] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2241.940] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 2241.940] (--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 rev 7, Mem @ 0xf4200000/1048576
[ 2241.940] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2241.940] Initializing built-in extension Generic Event Extension
[ 2241.940] Initializing built-in extension SHAPE
[ 2241.940] Initializing built-in extension MIT-SHM
[ 2241.940] Initializing built-in extension XInputExtension
[ 2241.940] Initializing built-in extension XTEST
[ 2241.940] Initializing built-in extension BIG-REQUESTS
[ 2241.940] Initializing built-in extension SYNC
[ 2241.940] Initializing built-in extension XKEYBOARD
[ 2241.940] Initializing built-in extension XC-MISC
[ 2241.940] Initializing built-in extension SECURITY
[ 2241.940] Initializing built-in extension XINERAMA
[ 2241.940] Initializing built-in extension XFIXES
[ 2241.940] Initializing built-in extension RENDER
[ 2241.940] Initializing built-in extension RANDR
[ 2241.940] Initializing built-in extension COMPOSITE
[ 2241.940] Initializing built-in extension DAMAGE
[ 2241.940] Initializing built-in extension MIT-SCREEN-SAVER
[ 2241.940] Initializing built-in extension DOUBLE-BUFFER
[ 2241.940] Initializing built-in extension RECORD
[ 2241.940] Initializing built-in extension DPMS
[ 2241.941] Initializing built-in extension Present
[ 2241.941] Initializing built-in extension DRI3
[ 2241.941] Initializing built-in extension X-Resource
[ 2241.941] Initializing built-in extension XVideo
[ 2241.941] Initializing built-in extension XVideo-MotionCompensation
[ 2241.941] Initializing built-in extension XFree86-VidModeExtension
[ 2241.941] Initializing built-in extension XFree86-DGA
[ 2241.941] Initializing built-in extension XFree86-DRI
[ 2241.941] Initializing built-in extension DRI2
[ 2241.941] (II) "glx" will be loaded by default.
[ 2241.941] (II) LoadModule: "dri2"
[ 2241.941] (II) Module "dri2" already built-in
[ 2241.941] (II) LoadModule: "glamoregl"
[ 2241.941] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 2241.942] (II) Module glamoregl: vendor="X.Org Foundation"
[ 2241.942] compiled for 1.15.0, module version = 0.6.0
[ 2241.942] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2241.942] (II) LoadModule: "glx"
[ 2241.943] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2241.943] (II) Module glx: vendor="X.Org Foundation"
[ 2241.943] compiled for 1.15.1, module version = 1.0.0
[ 2241.943] ABI class: X.Org Server Extension, version 8.0
[ 2241.943] (==) AIGLX enabled
[ 2241.943] Loading extension GLX
[ 2241.943] (II) LoadModule: "intel"
[ 2241.943] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2241.943] (II) Module intel: vendor="X.Org Foundation"
[ 2241.943] compiled for 1.15.0, module version = 2.99.911
[ 2241.943] Module class: X.Org Video Driver
[ 2241.943] ABI class: X.Org Video Driver, version 15.0
[ 2241.943] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 2241.944] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 2241.944] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 2241.944] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 2241.944] (++) using VT number 7
[ 2241.948] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 2241.948] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
[ 2241.948] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2241.948] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2241.948] (==) intel(0): RGB weight 888
[ 2241.948] (==) intel(0): Default visual is TrueColor
[ 2241.948] (**) intel(0): Option "AccelMethod" "sna"
[ 2241.948] (**) intel(0): Framebuffer tiled
[ 2241.948] (**) intel(0): Pixmaps tiled
[ 2241.948] (**) intel(0): "Tear free" disabled
[ 2241.948] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2241.948] (II) intel(0): Output LVDS1 has no monitor section
[ 2241.949] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 2241.949] (II) intel(0): Output VGA1 has no monitor section
[ 2241.949] (II) intel(0): Output HDMI1 has no monitor section
[ 2241.949] (II) intel(0): Output DP1 has no monitor section
[ 2241.949] (II) intel(0): Output HDMI2 has no monitor section
[ 2241.949] (II) intel(0): Output DP2 has no monitor section
[ 2241.949] (II) intel(0): Output DP3 has no monitor section
[ 2241.949] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 2241.949] (--) intel(0): Output LVDS1 using initial mode 1680x1050 on pipe 0
[ 2241.949] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 1
[ 2241.949] (==) intel(0): DPI set to (96, 96)
[ 2241.949] (II) Loading sub module "dri2"
[ 2241.949] (II) LoadModule: "dri2"
[ 2241.949] (II) Module "dri2" already built-in
[ 2241.949] (==) Depth 24 pixmap format is 32 bpp
[ 2241.949] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[ 2241.949] (==) intel(0): Backing store enabled
[ 2241.949] (==) intel(0): Silken mouse enabled
[ 2241.949] (II) intel(0): HW Cursor enabled
[ 2241.950] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2241.950] (==) intel(0): DPMS enabled
[ 2241.950] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 2241.950] (II) intel(0): [DRI2] Setup complete
[ 2241.950] (II) intel(0): [DRI2] DRI driver: i965
[ 2241.950] (II) intel(0): [DRI2] VDPAU driver: i965
[ 2241.950] (II) intel(0): direct rendering: DRI2 Enabled
[ 2241.950] (==) intel(0): hotplug detection: "enabled"
[ 2241.950] (--) RandR disabled
[ 2241.962] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2241.962] (II) AIGLX: enabled GLX_ARB_create_context
[ 2241.962] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2241.962] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2241.962] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2241.962] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2241.962] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2241.962] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2241.962] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2241.962] (II) AIGLX: Loaded and initialized i965
[ 2241.962] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2241.971] (II) intel(0): switch to mode 1680x1050@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 2241.994] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 2242.013] (II) intel(0): Setting screen physical size to 444 x 277
[ 2242.086] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2242.086] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2242.086] (II) LoadModule: "evdev"
[ 2242.087] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2242.087] (II) Module evdev: vendor="X.Org Foundation"
[ 2242.087] compiled for 1.15.1, module version = 2.9.0
[ 2242.087] Module class: X.Org XInput Driver
[ 2242.087] ABI class: X.Org XInput driver, version 20.0
[ 2242.087] (II) Using input driver 'evdev' for 'Power Button'
[ 2242.087] (**) Power Button: always reports core events
[ 2242.087] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2242.087] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2242.087] (--) evdev: Power Button: Found keys
[ 2242.087] (II) evdev: Power Button: Configuring as keyboard
[ 2242.087] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 2242.087] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2242.087] (**) Option "xkb_rules" "evdev"
[ 2242.087] (**) Option "xkb_model" "pc104"
[ 2242.087] (**) Option "xkb_layout" "us"
[ 2242.113] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 2242.113] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2242.113] (II) Using input driver 'evdev' for 'Video Bus'
[ 2242.113] (**) Video Bus: always reports core events
[ 2242.113] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 2242.113] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2242.113] (--) evdev: Video Bus: Found keys
[ 2242.113] (II) evdev: Video Bus: Configuring as keyboard
[ 2242.113] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 2242.113] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 2242.113] (**) Option "xkb_rules" "evdev"
[ 2242.113] (**) Option "xkb_model" "pc104"
[ 2242.113] (**) Option "xkb_layout" "us"
[ 2242.113] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 2242.114] (II) No input driver specified, ignoring this device.
[ 2242.114] (II) This device may have been added with another device file.
[ 2242.114] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 2242.114] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2242.114] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2242.114] (**) Sleep Button: always reports core events
[ 2242.114] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 2242.114] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2242.114] (--) evdev: Sleep Button: Found keys
[ 2242.114] (II) evdev: Sleep Button: Configuring as keyboard
[ 2242.114] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 2242.114] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2242.114] (**) Option "xkb_rules" "evdev"
[ 2242.114] (**) Option "xkb_model" "pc104"
[ 2242.114] (**) Option "xkb_layout" "us"
[ 2242.114] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2242.115] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 2242.115] (II) No input driver specified, ignoring this device.
[ 2242.115] (II) This device may have been added with another device file.
[ 2242.115] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event9)
[ 2242.115] (II) No input driver specified, ignoring this device.
[ 2242.115] (II) This device may have been added with another device file.
[ 2242.115] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event8)
[ 2242.115] (II) No input driver specified, ignoring this device.
[ 2242.115] (II) This device may have been added with another device file.
[ 2242.116] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
[ 2242.116] (II) No input driver specified, ignoring this device.
[ 2242.116] (II) This device may have been added with another device file.
[ 2242.116] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[ 2242.116] (II) No input driver specified, ignoring this device.
[ 2242.116] (II) This device may have been added with another device file.
[ 2242.116] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 2242.116] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2242.116] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2242.116] (**) AT Translated Set 2 keyboard: always reports core events
[ 2242.116] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 2242.116] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2242.116] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2242.116] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2242.116] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 2242.116] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2242.116] (**) Option "xkb_rules" "evdev"
[ 2242.116] (**) Option "xkb_model" "pc104"
[ 2242.116] (**) Option "xkb_layout" "us"
[ 2242.117] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 2242.117] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2242.117] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 2242.117] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 2242.117] (II) LoadModule: "synaptics"
[ 2242.117] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2242.117] (II) Module synaptics: vendor="X.Org Foundation"
[ 2242.117] compiled for 1.15.1, module version = 1.8.0
[ 2242.117] Module class: X.Org XInput Driver
[ 2242.117] ABI class: X.Org XInput driver, version 20.0
[ 2242.117] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2242.117] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2242.117] (**) Option "Device" "/dev/input/event11"
[ 2242.220] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5598 (res 67)
[ 2242.372] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4670 (res 111)
[ 2242.372] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2242.372] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2242.372] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 2242.372] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2242.372] (**) Option "TapButton1" "1"
[ 2242.372] (**) Option "TapButton2" "2"
[ 2242.372] (**) Option "TapButton3" "3"
[ 2242.372] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2242.372] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2242.408] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event11"
[ 2242.408] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 2242.408] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2242.408] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 2242.408] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 2242.408] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2242.408] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2242.408] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2242.408] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2242.408] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2242.409] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2242.409] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2242.409] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event12)
[ 2242.409] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 2242.409] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 2242.409] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 2242.409] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event12"
[ 2242.409] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 2242.409] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 2242.409] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 2242.409] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 2242.409] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 2242.409] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 2242.409] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2242.409] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input13/event12"
[ 2242.409] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 11)
[ 2242.409] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 2242.410] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 2242.410] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 2242.410] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 2242.410] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 2242.410] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 2242.410] (II) No input driver specified, ignoring this device.
[ 2242.410] (II) This device may have been added with another device file.
[ 2242.410] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 2242.410] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 2242.410] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 2242.410] (**) ThinkPad Extra Buttons: always reports core events
[ 2242.410] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 2242.410] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 2242.410] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 2242.410] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 2242.410] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event5"
[ 2242.410] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[ 2242.410] (**) Option "xkb_rules" "evdev"
[ 2242.410] (**) Option "xkb_model" "pc104"
[ 2242.410] (**) Option "xkb_layout" "us"
[ 2242.411] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/event13)
[ 2242.411] (II) No input driver specified, ignoring this device.
[ 2242.411] (II) This device may have been added with another device file.
[ 2242.411] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/js0)
[ 2242.411] (II) No input driver specified, ignoring this device.
[ 2242.411] (II) This device may have been added with another device file.
[ 2242.411] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/event14)
[ 2242.411] (II) No input driver specified, ignoring this device.
[ 2242.411] (II) This device may have been added with another device file.
[ 2242.411] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/js1)
[ 2242.411] (II) No input driver specified, ignoring this device.
[ 2242.412] (II) This device may have been added with another device file.
[ 2255.346] (II) intel(0): EDID vendor "DEL", prod id 16419
[ 2255.377] (II) intel(0): Using EDID range info for horizontal sync
[ 2255.378] (II) intel(0): Using EDID range info for vertical refresh
[ 2255.378] (II) intel(0): Printing DDC gathered Modelines:
[ 2255.378] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 2255.378] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2255.378] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2255.378] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2255.378] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2255.378] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2255.378] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2255.378] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2255.378] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2255.378] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2255.546] (II) intel(0): resizing framebuffer to 2960x1050
[ 2255.561] (II) intel(0): switch to mode 1680x1050@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 2255.579] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 2255.593] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 1, position (1680, 0), rotation normal, reflection noneI furthermore tried to delete ~/.kde4 and recreate it, but it did not solve the problem.
Does anyone have an idea, what might be the issue that causes this behaviour?
Thanks
Offline
#2 2014-05-29 12:23:56
- drcouzelis
- Member
- From: Connecticut, USA
- Registered: 2009-11-09
- Posts: 4,092
- Website
Re: KDE - keyboard unresponsive when changing tty
What display manager are you useng? (KDM, GDM, SLiM...)
How are you starting X?
Last edited by drcouzelis (2014-05-29 12:24:10)
Offline
#3 2014-05-29 22:09:02
- subnex
- Member
- Registered: 2009-08-10
- Posts: 15
Re: KDE - keyboard unresponsive when changing tty
I use KDM. Also when i tried the other desktops i mentioned.
I start X through systemd using kdm.service
#systemctl status kdm.service
* kdm.service - K Display Manager
Loaded: loaded (/usr/lib/systemd/system/kdm.service; enabled)
Active: active (running) since Thu 2014-05-29 16:09:25 EST; 15h ago
Main PID: 480 (kdm)
CGroup: /system.slice/kdm.service
|- 480 /usr/bin/kdm -nodaemon
`-6588 /usr/bin/X :0 vt7 -nolisten tcp -auth /var/run/xauth/A:0-58rbna
May 29 16:09:25 mugpahug-laptop systemd[1]: Starting K Display Manager...
May 29 16:09:25 mugpahug-laptop systemd[1]: Started K Display Manager.
May 29 16:09:34 mugpahug-laptop kdm_greet[1306]: Cannot set locale. Translations will not work.
May 29 16:09:42 mugpahug-laptop kdm[1304]: :0[1304]: pam_unix(kde:session): session opened for user mugpahug by (uid=0)
May 29 16:19:19 mugpahug-laptop kdm[480]: X server for display :0 terminated unexpectedly
May 29 16:19:19 mugpahug-laptop kdm_greet[6595]: Cannot set locale. Translations will not work.
May 29 16:19:21 mugpahug-laptop kdm[6594]: :0[6594]: pam_unix(kde:session): session opened for user mugpahug by (uid=0)The unexpected termination is because i restarted X there.
Offline