You are not logged in.

Pages: 1 … 263 264 265 266 267 … 307

Topic closed

#6601 2014-05-28 02:05:38

phonky
Member
Registered: 2008-12-19
Posts: 78

Re: The AMD/ATI Bar & Grill

For testing purposes I even removed the xf86-video-ati and ati-dri packages.

I still have that weird
[     8.428175] [drm:radeon_init] *ERROR* No UMS support in radeon module!
at boot!

Where the hell would that come from if I removed the driver????

Offline

#6602 2014-05-28 03:21:02

phonky
Member
Registered: 2008-12-19
Posts: 78

Re: The AMD/ATI Bar & Grill

Excuse my verbosity but this is getting weird.

I reinstalled the driver.
I can manage to load the driver and boot into X from the command line with

modprobe radeon modeset=1

I am now trying to get this to work at boot
which is still failing for some reason.

This is so weird, there is no trace of this parameter in the wiki,
but I found it elsewhere on the web.

And it's weird that I can get into X after booting,
logging in via the command line and entering the above modprobe.

But from boot it's not working....

Last edited by phonky (2014-05-28 03:25:36)

Offline

#6603 2014-05-28 03:36:19

phonky
Member
Registered: 2008-12-19
Posts: 78

Re: The AMD/ATI Bar & Grill

FINALLY!!!!!

I am so sorry for cluttering this long thread, but maybe this could be of help to someone else.

I finally created a
/etc/modprobe.d/radeon.conf

which has an entry

options radeon modeset=1

with this I am now back into my familiar X !!!!!
also no more
[     8.428175] [drm:radeon_init] *ERROR* No UMS support in radeon module!
messages at boot.

If someone wants to shed light of what has happened and why that parameter is needed, would be welcomed,
but it's weird that there is no such mention in the wiki, so I wonder what's going on.

Anyway, happy to have my X back!

AAAANDDDD...the original problem, which triggered this whole mess (slow scrolling in 2D) is GONE thanks to the open source driver.
Now I am happy smile

Offline

#6604 2014-05-28 19:27:25

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

ChemBro wrote:

Thanks again ChemBro smile

catalyst-test(-pxp)@AUR and [catalyst] repo are now armed with this release:
- it gave me better performance in serious sam 3
- phoronix forums user Espionage724 said: "I have a under/overscan option for my laptop's built-in screen now"

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

Offline

#6605 2014-05-30 20:56:28

Lord Aro
Member
Registered: 2013-07-29
Posts: 16

Re: The AMD/ATI Bar & Grill

Whenever I try to debug something with valgrind, I get thousands millions of errors like these:

==29934== 120 bytes in 1 blocks are definitely lost in loss record 106 of 209
==29934==    at 0x4C28730: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29934==    by 0xBBFA838: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0x7CC07FF: ???
==29934==    by 0xB29F98C: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0xD7B871F: ???
==29934== 
==29934== 120 bytes in 1 blocks are definitely lost in loss record 107 of 209
==29934==    at 0x4C28730: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29934==    by 0xBBFA838: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0xCB914EF: ???
==29934==    by 0xB29F98C: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0xD7E182F: ???
==29934== 
==29934== 120 bytes in 1 blocks are definitely lost in loss record 108 of 209
==29934==    at 0x4C28730: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29934==    by 0xBBFA838: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0x7D5072F: ???
==29934==    by 0xB29F98C: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0xD0425BF: ???
==29934== 
==29934== 120 bytes in 1 blocks are definitely lost in loss record 109 of 209
==29934==    at 0x4C28730: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29934==    by 0xBBFA838: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0xCCFDF1F: ???
==29934==    by 0xB29F98C: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0xE7508AF: ???
==29934== 
==29934== 208 bytes in 2 blocks are possibly lost in loss record 124 of 209
==29934==    at 0x4C28730: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29934==    by 0xBBFA848: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0x380000F: ???
==29934==    by 0xB28BC28: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0x7F0E60F: ???
==29934==    by 0x7D54F4F: ???
==29934==    by 0xD96379F: ???
==29934==    by 0x7F0E60F: ???
==29934== 
==29934== 248 bytes in 1 blocks are possibly lost in loss record 129 of 209
==29934==    at 0x4C28730: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29934==    by 0xBBFA838: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0xFFEFFED53: ???
==29934==    by 0xBC6048F: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0xC5EF65F: ???
==29934==    by 0xFFEFFEAFF: ???
==29934==    by 0xFFEFFED53: ???
==29934==    by 0xBAA0B9D: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)
==29934==    by 0xC5EF65F: ???
==29934==    by 0xFFEFFEAFF: ???
==29934==    by 0xFFEFFED53: ???
==29934==    by 0xAF47FFE: ??? (in /usr/lib/xorg/modules/dri/fglrx_dri.so)

They seem to be coming from fglrx, but this wasn't happening a few months ago but obviously i've got no idea what's changed

Failing a fix, has anyone got a working suppressions file? I've tried but with no success (incompetence rather than anything else) it's really impossible to use valgrind like this hmm

Offline

#6606 2014-05-31 22:08:24

causa-prima
Member
Registered: 2013-07-21
Posts: 24

Re: The AMD/ATI Bar & Grill

14.6 gives me some weird issues:

I primarily use a Dell U2711 connected to the DisplayPort of my 7750. Also there's a TV connected to HDMI, which usually is turned off/ should get not signal from my PC.
I have created  a scripts for turning the signal for my TV on or off and adjusting the picture (underscan-issues -_-). You can find the script here.

It used to work like a charm, but since the upgrade to 14.6 there are issues: After using the script the signal to TV is turned on, monitor is turned off, but I get a frozen desktop screen. I can unfreeze it via another script that just executes 'xrandr --output DFP1 --auto'. Also, the picture adjustment (the ati-config-stuff called in the tv-switch script) has no effect, I have to execute those commands again.
If I execute all those commands by hand in the same way the script does it, nothing weird happens! What's going on here? And just to make it even more annoying: After executing the script and shutting off the signal to the TV I get glitches reaching from flickering picture to completely distoreted screen. For some time this goes away if I hit ctrl+alt+del and some KDE-logout-screen is showing, but shortly after that the picture is all glitchy again.

Any ideas what's going on here? The last thing might indicate some connection to KDE, but all the rest doesn't.

Offline

#6607 2014-06-05 00:58:46

DarksideEE7
Member
From: Arkansas, United States
Registered: 2009-06-06
Posts: 356

Re: The AMD/ATI Bar & Grill

Is anyone using Chromium with fglrx?  I get %100 CPU usage with the latest version....when running htop I see this process is the culprit:

/usr/lib/chromium/chromium --type=gpu-process --channel=951.0.478451731 --supports-dual-gpus=false --gpu-driver-bug-workarounds=1,13,20 --disable-accelerated-video-decode --gpu-vendor-id=0x1002 --gpu-device-id=0x67b0 --gpu-driver-vendor=ATI / AMD --gpu-driver-version=14.20

Really annoying...

Offline

#6608 2014-06-05 09:45:41

causa-prima
Member
Registered: 2013-07-21
Posts: 24

Re: The AMD/ATI Bar & Grill

New info:
- if I comment out the aticonfig-lines everything works just fine, but I have underscan / annoying black border
- if I leave them in, use the script to switch between TV and monitor twice and get those glitches/artifacts, not even restarting X fixes the problem - I have to do a reboot (or someone tell me another way I could try)
- if I do all the steps in the script manually (with the aticonfig-lines) there are sporadic glitches, but very short ones and nearly unnoticable, and only on the TV

I hope there is some fix. Or should I report this somewhere? Where?
Alternatively I'd like to know another way of getting rid of those underscan borders. Any ideas (exept via image transformation with xrandr, bad image quality with that)?

Offline

#6609 2014-06-05 12:10:48

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,163
Website

Re: The AMD/ATI Bar & Grill

DarksideEE7 wrote:

Is anyone using Chromium with fglrx?  I get %100 CPU usage with the latest version....when running htop I see this process is the culprit:

/usr/lib/chromium/chromium --type=gpu-process --channel=951.0.478451731 --supports-dual-gpus=false --gpu-driver-bug-workarounds=1,13,20 --disable-accelerated-video-decode --gpu-vendor-id=0x1002 --gpu-device-id=0x67b0 --gpu-driver-vendor=ATI / AMD --gpu-driver-version=14.20

Really annoying...

I get 100% CPU usage more often with Chromium 35, but only when I'm opening a few tabs at the same time.

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#6610 2014-06-05 18:10:18

hippieben
Member
Registered: 2013-10-27
Posts: 218

Re: The AMD/ATI Bar & Grill

After updating to the latest catalyst my second monitor, which is a TV connected via DVI > HDMI cable is seen as an HDMI connected TV, causing the image to be fuzzy.  Previously it was seen as a DVI display.  Is there anyway to fix this?

Last edited by hippieben (2014-06-14 04:10:10)

Offline

#6611 2014-06-05 18:21:42

hippieben
Member
Registered: 2013-10-27
Posts: 218

Re: The AMD/ATI Bar & Grill

Repo seems to be down.  Anyone got a mirror link?  Doesn't seem to be listed in the wiki anymore....

Offline

#6612 2014-06-06 03:02:21

ase1590
Member
Registered: 2013-02-09
Posts: 14

Re: The AMD/ATI Bar & Grill

After updating catalyst, apps such as Lxdm, qbittorent, and google chrome now seem to be crashing. my lxdm log had this in it.
http://sprunge.us/NPMg

Chrome gives me this: http://sprunge.us/XNgY

My xorg logfile had no errors. oddly, cinnamon starts up fine. Only certain apps segfault.

Edit: turns out my issue was actually with Libxcursor. downgraded that and life is all good.

Last edited by ase1590 (2014-06-15 16:18:21)

Offline

#6613 2014-06-06 17:35:13

dRaiser
Member
From: Poland
Registered: 2013-05-20
Posts: 51
Website

Re: The AMD/ATI Bar & Grill

Hi. Could you tell me why my pxp catalyst install cannot load Catalyst? Black screen & freeze on start. Fine on Intel.

Xorg log:

(..)
[   172.236] (**) fglrx(0): DPMS enabled
[   172.236] (==) fglrx(0): Intel XvMC decoder enabled
[   172.236] (II) fglrx(0): Set up textured video
[   172.236] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
[   172.236] (II) fglrx(0): direct rendering: DRI2 Enabled
[   172.236] (WW) fglrx(0): Option "VendorName" is not used
[   172.236] (WW) fglrx(0): Option "ModelName" is not used
[   172.236] (WW) fglrx(0): Option "Shadow" is not used
[   172.236] (WW) fglrx(0): Option "Tiling" is not used
[   172.236] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[   172.236] (==) fglrx(0): hotplug detection: "enabled"
[   172.236] (EE) 
[   172.236] (EE) Backtrace:
[   172.236] (EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x584b08]
[   172.236] (EE) 1: /usr/bin/X (0x400000+0x1887f9) [0x5887f9]
[   172.236] (EE) 2: /usr/lib/libpthread.so.0 (0x7f373b819000+0xf4b0) [0x7f373b8284b0]
[   172.236] (EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f3737d25000+0x15c80) [0x7f3737d3ac80]
[   172.236] (EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f3737d25000+0x10d969) [0x7f3737e32969]
[   172.236] (EE) 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f3737d25000+0x10decd) [0x7f3737e32ecd]
[   172.237] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs115_atiddxPxScreenInit+0x72) [0x7f37387a6702]
[   172.237] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs115_atiddxScreenInit+0x1108) [0x7f3738782f98]
[   172.237] (EE) 8: /usr/bin/X (AddScreen+0x71) [0x435f11]
[   172.237] (EE) 9: /usr/bin/X (InitOutput+0x3df) [0x476c9f]
[   172.237] (EE) 10: /usr/bin/X (0x400000+0x398bb) [0x4398bb]
[   172.237] (EE) 11: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f373a486000]
[   172.237] (EE) 12: /usr/bin/X (0x400000+0x2507e) [0x42507e]
[   172.237] (EE) 
[   172.237] (EE) Segmentation fault at address 0x18
[   172.237] (EE) 
Fatal server error:
[   172.237] (EE) Caught signal 11 (Segmentation fault). Server aborting
[   172.237] (EE) 
[   172.237] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   172.237] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   172.237] (EE)

With downgraded intel driver to xf86-video-intel to 2.99.911-1, it's actually different (positive?) output, but still freezes.

(...)
[    36.039] (--) fglrx(0): Chipset: "AMD Radeon HD 7500M/7600M Series" (Chipset = 0x6841)
[    36.039] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x17f4)
[    36.039] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    36.039] (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
[    36.039] (--) fglrx(0): MMIO registers at 0xd0900000
[    36.039] (--) fglrx(0): I/O port at 0x00003000
[    36.039] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    36.055] (II) fglrx(0): AC Adapter is used
[    36.055] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    36.055] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3
[    36.055] (II) fglrx(0): PCIE card detected
[    36.055] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    36.055] (WW) fglrx(0): board is an unknown third party board, chipset is supported

Last edited by dRaiser (2014-06-06 17:41:44)

Offline

#6614 2014-06-07 01:21:43

sokomo
Member
Registered: 2014-06-07
Posts: 2

Re: The AMD/ATI Bar & Grill

It's seem I have a same problem like dRaiser. My screen is hang after running "startx" command. In my case, I used "catalyst-test-pxp" package. I installed xorg-server, intel-dri, xf86-video-intel, and glamor-egl from Arch Linux official repo, and removed ati-dri, libgl, xf86-video-ati.
My kernel version is 3.14.5
Xorg config (generated from aticonfig):

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen1" 0 0
EndSection


Section "Monitor"
	Identifier   "Monitor1"
        VendorName   "ATI Proprietary Driver"
        ModelName    "Generic Autodetecting Monitor"
	Option	     "DPMS" "true"

EndSection

Section "Device"
	Identifier  "Card1"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection


Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Xorg log:

[   848.579] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[   848.579] X Protocol Version 11, Revision 0
[   848.579] Build Operating System: Linux 3.14.0-4-ARCH x86_64 
[   848.579] Current Operating System: Linux clowlegacy 3.14.5-1-ARCH #1 SMP PREEMPT Sun Jun 1 07:36:23 CEST 2014 x86_64
[   848.580] Kernel command line: BOOT_IMAGE=/vmlinuz-linux ccsecurity=off CCS_trigger=/usr/lib/systemd/systemd root=UUID=75a2c4f2-ca78-4fcb-b0c4-13533af5f1a3 rw
[   848.580] Build Date: 14 April 2014  08:39:09AM
[   848.580]  
[   848.580] Current version of pixman: 0.32.4
[   848.581] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   848.581] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   848.582] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun  6 21:21:38 2014
[   848.623] (==) Using config file: "/etc/X11/xorg.conf"
[   848.623] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   848.623] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   848.662] (==) ServerLayout "X.org Configured"
[   848.662] (**) |-->Screen "Screen1" (0)
[   848.662] (**) |   |-->Monitor "Monitor1"
[   848.673] (**) |   |-->Device "Card1"
[   848.673] (==) Automatically adding devices
[   848.673] (==) Automatically enabling devices
[   848.673] (==) Automatically adding GPU devices
[   848.742] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   848.742] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[   848.742] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   848.742] (II) Loader magic: 0x804c80
[   848.742] (II) Module ABI versions:
[   848.742] 	X.Org ANSI C Emulation: 0.4
[   848.742] 	X.Org Video Driver: 15.0
[   848.742] 	X.Org XInput driver : 20.0
[   848.742] 	X.Org Server Extension : 8.0
[   848.743] (II) xfree86: Adding drm device (/dev/dri/card0)
[   848.746] (--) PCI:*(0:0:2:0) 8086:0166:1028:0598 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[   848.746] (--) PCI: (0:1:0:0) 1002:6840:1028:0598 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[   848.746] (II) Open ACPI successful (/var/run/acpid.socket)
[   848.759] Initializing built-in extension Generic Event Extension
[   848.759] Initializing built-in extension SHAPE
[   848.759] Initializing built-in extension MIT-SHM
[   848.759] Initializing built-in extension XInputExtension
[   848.759] Initializing built-in extension XTEST
[   848.759] Initializing built-in extension BIG-REQUESTS
[   848.759] Initializing built-in extension SYNC
[   848.760] Initializing built-in extension XKEYBOARD
[   848.760] Initializing built-in extension XC-MISC
[   848.760] Initializing built-in extension SECURITY
[   848.760] Initializing built-in extension XINERAMA
[   848.760] Initializing built-in extension XFIXES
[   848.760] Initializing built-in extension RENDER
[   848.760] Initializing built-in extension RANDR
[   848.760] Initializing built-in extension COMPOSITE
[   848.760] Initializing built-in extension DAMAGE
[   848.760] Initializing built-in extension MIT-SCREEN-SAVER
[   848.760] Initializing built-in extension DOUBLE-BUFFER
[   848.760] Initializing built-in extension RECORD
[   848.762] Initializing built-in extension DPMS
[   848.764] Initializing built-in extension Present
[   848.766] Initializing built-in extension DRI3
[   848.767] Initializing built-in extension X-Resource
[   848.769] Initializing built-in extension XVideo
[   848.771] Initializing built-in extension XVideo-MotionCompensation
[   848.772] Initializing built-in extension XFree86-VidModeExtension
[   848.774] Initializing built-in extension XFree86-DGA
[   848.775] Initializing built-in extension XFree86-DRI
[   848.777] Initializing built-in extension DRI2
[   848.777] (II) "glx" will be loaded by default.
[   848.777] (II) LoadModule: "dri2"
[   848.778] (II) Module "dri2" already built-in
[   848.778] (II) LoadModule: "glamoregl"
[   848.807] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   848.914] (II) Module glamoregl: vendor="X.Org Foundation"
[   848.914] 	compiled for 1.15.0, module version = 0.6.0
[   848.914] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   848.914] (II) LoadModule: "glx"
[   848.914] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[   848.935] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   848.935] 	compiled for 6.9.0, module version = 1.0.0
[   848.937] Loading extension GLX
[   848.937] (II) LoadModule: "fglrx"
[   848.953] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   849.397] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[   849.397] 	compiled for 1.4.99.906, module version = 14.10.2
[   849.397] 	Module class: X.Org Video Driver
[   849.398] (II) Loading sub module "fglrxdrm"
[   849.398] (II) LoadModule: "fglrxdrm"
[   849.399] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   849.424] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   849.424] 	compiled for 1.4.99.906, module version = 14.10.2
[   849.424] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[   849.424] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001          
[   849.424] (II) AMD Proprietary Linux Driver Build Date: May  5 2014 21:38:38
[   849.424] (++) using VT number 1

[   849.424] (WW) Falling back to old probe method for fglrx
[   849.487] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[   849.491] ukiDynamicMajor: found major device number 251
[   849.491] ukiDynamicMajor: found major device number 251
[   849.491] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   849.491] ukiOpenDevice: node name is /dev/ati/card0
[   849.491] ukiOpenDevice: open result is 10, (OK)
[   856.066] ukiOpenByBusid: ukiOpenMinor returns 10
[   856.067] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   856.149] (--) Chipset Supported AMD Graphics Processor (0x6840) found
[   856.156] (II) fglrx: intel VGA device detected, load intel driver.
[   856.156] (II) LoadModule: "intel"
[   856.157] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   856.197] (II) Module intel: vendor="X.Org Foundation"
[   856.197] 	compiled for 1.15.0, module version = 2.99.911
[   856.197] 	Module class: X.Org Video Driver
[   856.197] 	ABI class: X.Org Video Driver, version 15.0
[   856.198] (II) fglrx(0): pEnt->device->identifier=0xa9bef0
[   856.199] (II) intel(1): pEnt->device->identifier=(nil)
[   856.200] (EE) Screen 1 deleted because of no matching config section.
[   856.200] (II) UnloadModule: "intel"
[   856.200] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[   856.200] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[   857.094] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibGL:
Switch to AMD

[   857.110] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   857.110] (==) fglrx(0): RGB weight 888
[   857.110] (==) fglrx(0): Default visual is TrueColor
[   857.111] (**) fglrx(0): Option "Tiling" "off"
[   857.111] (**) fglrx(0): Option "LinearFramebuffer" "on"
[   857.111] (**) fglrx(0): ChipID override: 0x0166
[   857.111] (**) fglrx(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[   857.111] (**) fglrx(0): Relaxed fencing enabled
[   857.111] (**) fglrx(0): Wait on SwapBuffers? enabled
[   857.111] (**) fglrx(0): Triple buffering? enabled
[   857.111] (**) fglrx(0): Framebuffer linear
[   857.111] (**) fglrx(0): Pixmaps linear
[   857.111] (**) fglrx(0): 3D buffers tiled
[   857.123] (**) fglrx(0): SwapBuffers wait enabled
[   857.123] (==) fglrx(0): video overlay key set to 0x101fe
[   857.123] (II) fglrx(0): Output LVDS1 using monitor section Monitor1
[   857.124] (--) fglrx(0): found backlight control interface acpi_video0
[   857.149] (II) fglrx(0): Output VGA1 has no monitor section
[   857.150] (II) fglrx(0): Output HDMI1 has no monitor section
[   857.150] (II) fglrx(0): Output DP1 has no monitor section
[   857.150] (II) fglrx(0): EDID for output LVDS1
[   857.150] (II) fglrx(0): Manufacturer: SDC  Model: 5441  Serial#: 0
[   857.150] (II) fglrx(0): Year: 2012  Week: 0
[   857.150] (II) fglrx(0): EDID Version: 1.4
[   857.150] (II) fglrx(0): Digital Display Input
[   857.151] (II) fglrx(0): 6 bits per channel
[   857.151] (II) fglrx(0): Digital interface is undefined
[   857.151] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   857.151] (II) fglrx(0): Gamma: 2.20
[   857.151] (II) fglrx(0): No DPMS capabilities specified
[   857.151] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   857.151] (II) fglrx(0): First detailed timing is preferred mode
[   857.151] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[   857.151] (II) fglrx(0): redX: 0.574 redY: 0.339   greenX: 0.333 greenY: 0.576
[   857.151] (II) fglrx(0): blueX: 0.160 blueY: 0.115   whiteX: 0.313 whiteY: 0.329
[   857.151] (II) fglrx(0): Manufacturer's mask: 0
[   857.151] (II) fglrx(0): Supported detailed timing:
[   857.151] (II) fglrx(0): clock: 76.3 MHz   Image Size:  344 x 194 mm
[   857.151] (II) fglrx(0): h_active: 1366  h_sync: 1430  h_sync_end 1478 h_blank_end 1606 h_border: 0
[   857.151] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 792 v_border: 0
[   857.151] (II) fglrx(0): Supported detailed timing:
[   857.151] (II) fglrx(0): clock: 50.8 MHz   Image Size:  344 x 194 mm
[   857.151] (II) fglrx(0): h_active: 1366  h_sync: 1430  h_sync_end 1478 h_blank_end 1606 h_border: 0
[   857.151] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 792 v_border: 0
[   857.151] (II) fglrx(0):  P13XK156AT
[   857.151] (II) fglrx(0): Unknown vendor-specific block 0
[   857.151] (II) fglrx(0): EDID (in hex):
[   857.151] (II) fglrx(0): 	00ffffffffffff004c83415400000000
[   857.151] (II) fglrx(0): 	00160104902213780a36259356559329
[   857.151] (II) fglrx(0): 	1d505400000001010101010101010101
[   857.151] (II) fglrx(0): 	010101010101ce1d56f0500018304030
[   857.151] (II) fglrx(0): 	250058c21000001ad81356f050001830
[   857.151] (II) fglrx(0): 	4030250058c21000001a000000fe0050
[   857.151] (II) fglrx(0): 	3133584b8031353641540a2000000000
[   857.151] (II) fglrx(0): 	00004121940010000001010a20200054
[   857.151] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[   857.151] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[   857.151] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[   857.151] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[   857.151] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[   857.151] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[   857.151] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[   857.151] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[   857.151] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[   857.152] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[   857.152] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[   857.152] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[   857.152] (II) fglrx(0): Printing probed modes for output LVDS1
[   857.152] (II) fglrx(0): Modeline "1366x768"x60.0   76.30  1366 1430 1478 1606  768 770 775 792 +hsync -vsync (47.5 kHz eP)
[   857.152] (II) fglrx(0): Modeline "1366x768"x39.9   50.80  1366 1430 1478 1606  768 770 775 792 +hsync -vsync (31.6 kHz e)
[   857.152] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   857.152] (II) fglrx(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   857.152] (II) fglrx(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   857.152] (II) fglrx(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   857.176] (II) fglrx(0): EDID for output VGA1
[   857.177] (II) fglrx(0): EDID for output HDMI1
[   857.177] (II) fglrx(0): EDID for output DP1
[   857.177] (II) fglrx(0): Output LVDS1 connected
[   857.177] (II) fglrx(0): Output VGA1 disconnected
[   857.177] (II) fglrx(0): Output HDMI1 disconnected
[   857.177] (II) fglrx(0): Output DP1 disconnected
[   857.177] (II) fglrx(0): Using exact sizes for initial modes
[   857.177] (II) fglrx(0): Output LVDS1 using initial mode 1366x768
[   857.177] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   857.177] (II) fglrx(0): Kernel page flipping support detected, enabling
[   857.177] (==) fglrx(0): DPI set to (96, 96)
[   857.177] (II) Loading sub module "fb"
[   857.177] (II) LoadModule: "fb"
[   857.177] (II) Loading /usr/lib/xorg/modules/libfb.so
[   857.189] (II) Module fb: vendor="X.Org Foundation"
[   857.189] 	compiled for 1.15.1, module version = 1.0.0
[   857.189] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   857.189] (II) Loading sub module "dri2"
[   857.189] (II) LoadModule: "dri2"
[   857.189] (II) Module "dri2" already built-in
[   857.189] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   857.189] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   857.189] (==) fglrx(0): Default visual is TrueColor
[   857.189] (**) fglrx(0): Option "DPMS" "true"
[   857.190] (==) fglrx(0): RGB weight 888
[   857.190] (II) fglrx(0): Using 8 bits per RGB 
[   857.190] (==) fglrx(0): Buffer Tiling is ON
[   857.190] (II) Loading sub module "fglrxdrm"
[   857.190] (II) LoadModule: "fglrxdrm"
[   857.190] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   857.190] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   857.190] 	compiled for 1.4.99.906, module version = 14.10.2
[   857.193] ukiDynamicMajor: found major device number 251
[   857.194] ukiDynamicMajor: found major device number 251
[   857.194] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   857.194] ukiOpenDevice: node name is /dev/ati/card0
[   857.194] ukiOpenDevice: open result is 14, (OK)
[   857.194] ukiOpenByBusid: ukiOpenMinor returns 14
[   857.194] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   857.194] (**) fglrx(0): NoAccel = NO
[   857.194] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[   857.194] (--) fglrx(0): Chipset: "AMD Radeon HD 7600M Series" (Chipset = 0x6840)
[   857.194] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x0598)
[   857.194] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[   857.194] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[   857.194] (--) fglrx(0): MMIO registers at 0xc0000000
[   857.194] (--) fglrx(0): I/O port at 0x00003000
[   857.194] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   857.210] (II) fglrx(0): AC Adapter is used
[   857.210] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[   857.211] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[   857.211] (II) fglrx(0): PCIE card detected
[   857.211] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   857.211] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   857.235] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[   857.235] (II) fglrx(0): RandR 1.2 support is enabled!
[   857.235] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[   857.235] (II) Loading sub module "fb"
[   857.235] (II) LoadModule: "fb"
[   857.236] (II) Loading /usr/lib/xorg/modules/libfb.so
[   857.236] (II) Module fb: vendor="X.Org Foundation"
[   857.236] 	compiled for 1.15.1, module version = 1.0.0
[   857.236] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   857.236] (II) fglrx(0): EDID Management option: EDID Management is enabled
[   857.236] (II) Loading sub module "ddc"
[   857.236] (II) LoadModule: "ddc"
[   857.236] (II) Module "ddc" already built-in
[   857.319] (II) fglrx(0): Eyefinity capable adapter detected.
[   857.319] (II) fglrx(0): Adapter AMD Radeon HD 7600M Series has 6 configurable heads and 0 displays connected.
[   857.319] (==) fglrx(0):  PseudoColor visuals disabled
[   857.319] (II) Loading sub module "ramdac"
[   857.319] (II) LoadModule: "ramdac"
[   857.320] (II) Module "ramdac" already built-in
[   857.320] (==) fglrx(0): NoDRI = NO
[   857.320] (==) fglrx(0): Capabilities: 0x00000000
[   857.320] (==) fglrx(0): CapabilitiesEx: 0x00000000
[   857.320] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[   857.320] (==) fglrx(0): UseFastTLS=0
[   857.320] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[   857.320] (--) Depth 24 pixmap format is 32 bpp
[   857.320] (II) LoadModule: "glesx"
[   857.333] (II) Loading /usr/lib/xorg/modules/glesx.so
[   857.468] (II) Module glesx: vendor="X.Org Foundation"
[   857.468] 	compiled for 1.4.99.906, module version = 1.0.0
[   857.468] Loading extension GLESX
[   857.479] (II) fglrx(0): [DRI2] Setup complete
[   857.479] (II) fglrx(0): [DRI2]   DRI driver: i965
[   857.479] (II) fglrx(0): [DRI2]   VDPAU driver: i965
[   857.479] (II) fglrx(0): Allocated new frame buffer 1408x768 stride 5632, untiled
[   857.483] (II) UXA(0): Driver registered support for the following operations:
[   857.483] (II)         solid
[   857.483] (II)         copy
[   857.483] (II)         composite (RENDER acceleration)
[   857.483] (II)         put_image
[   857.483] (II)         get_image
[   857.483] (==) fglrx(0): Backing store enabled
[   857.483] (==) fglrx(0): Silken mouse enabled
[   857.483] (II) fglrx(0): Initializing HW Cursor
[   857.483] (II) fglrx(0): Use standard UXA acceleration.
[   857.483] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   857.484] (**) fglrx(0): DPMS enabled
[   857.484] (==) fglrx(0): Intel XvMC decoder enabled
[   857.484] (II) fglrx(0): Set up textured video
[   857.484] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
[   857.484] (II) fglrx(0): direct rendering: DRI2 Enabled
[   857.484] (WW) fglrx(0): Option "Shadow" is not used
[   857.484] (WW) fglrx(0): Option "Tiling" is not used
[   857.484] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[   857.484] (==) fglrx(0): hotplug detection: "enabled"
[   857.484] (EE) 
[   857.484] (EE) Backtrace:
[   857.506] (EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x584b08]
[   857.506] (EE) 1: /usr/bin/X (0x400000+0x1887f9) [0x5887f9]
[   857.506] (EE) 2: /usr/lib/libpthread.so.0 (0x7f888e9ff000+0xf4b0) [0x7f888ea0e4b0]
[   857.507] (EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f8886fe1000+0x15c80) [0x7f8886ff6c80]
[   857.507] (EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f8886fe1000+0x10d969) [0x7f88870ee969]
[   857.507] (EE) 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f8886fe1000+0x10decd) [0x7f88870eeecd]
[   857.507] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs115_atiddxPxScreenInit+0x72) [0x7f8887a62702]
[   857.508] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs115_atiddxScreenInit+0x1108) [0x7f8887a3ef98]
[   857.508] (EE) 8: /usr/bin/X (AddScreen+0x71) [0x435f11]
[   857.508] (EE) 9: /usr/bin/X (InitOutput+0x3df) [0x476c9f]
[   857.508] (EE) 10: /usr/bin/X (0x400000+0x398bb) [0x4398bb]
[   857.508] (EE) 11: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f888d66c000]
[   857.508] (EE) 12: /usr/bin/X (0x400000+0x2507e) [0x42507e]
[   857.508] (EE) 
[   857.508] (EE) Segmentation fault at address 0x18
[   857.508] (EE) 
Fatal server error:
[   857.508] (EE) Caught signal 11 (Segmentation fault). Server aborting
[   857.508] (EE) 
[   857.509] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   857.509] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   857.509] (EE)

lspci -vv output (VGA only):

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Dell Device 0598
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at c1000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 4000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4142
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [a4] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: i915
	Kernel modules: i915

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (prog-if 00 [VGA controller])
	Subsystem: Dell Radeon HD 7670M
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 47
	Region 0: Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at c0000000 (64-bit, non-prefetchable) [size=128K]
	Region 4: I/O ports at 3000 [size=256]
	Expansion ROM at c0020000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 256 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 4152
	Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [150 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap+ ChkEn-
	Kernel driver in use: fglrx_pci
	Kernel modules: radeon, fglrx

Offline

#6615 2014-06-07 11:00:09

sokomo
Member
Registered: 2014-06-07
Posts: 2

Re: The AMD/ATI Bar & Grill

I have solved the problem. Just downgrade the xf86-video-intel package to 2.99.910-1 version. It works great in both catalyst-total-pxp and catalyst-test-pxp. Thanks Vi0L0 for supporting the package.

Offline

#6616 2014-06-07 13:09:57

dRaiser
Member
From: Poland
Registered: 2013-05-20
Posts: 51
Website

Re: The AMD/ATI Bar & Grill

Thanks, sokomo! So I've downgraded not low enough. It's definitely working now!

Offline

#6617 2014-06-08 20:05:54

Kuci
Member
Registered: 2013-03-29
Posts: 38
Website

Re: The AMD/ATI Bar & Grill

I would like to ask whether problems with GDM 3.12 are still present with Catalyst 14.6 Beta. Thank you.

Notebook: ASUS U38DT + Samsung SSD 840 EVO 250GB + Intel Dual Band Wireless AC 7260

GitHub

Offline

#6618 2014-06-10 15:16:05

TheNumb
Member
Registered: 2013-10-01
Posts: 4

Re: The AMD/ATI Bar & Grill

Kuci wrote:

I would like to ask whether problems with GDM 3.12 are still present with Catalyst 14.6 Beta. Thank you.

Yup.

Offline

#6619 2014-06-14 04:10:20

hippieben
Member
Registered: 2013-10-27
Posts: 218

Re: The AMD/ATI Bar & Grill

hippieben wrote:

After updating to the latest catalyst my second monitor, which is a TV connected via DVI > HDMI cable is seen as an HDMI connected TV, causing the image to be fuzzy.  Previously it was seen as a DVI display.  Is there anyway to fix this?


bump?  this thread is unusually dead.... whats going on guys?

Offline

#6620 2014-06-16 11:47:41

whaler
Member
From: Oslo, Norway
Registered: 2008-03-25
Posts: 324

Re: The AMD/ATI Bar & Grill

For some of the problems here, please be aware of bug in the latest version of libva.

See this thread:

https://bbs.archlinux.org/viewtopic.php … 0#p1426100

Offline

#6621 2014-06-18 13:23:28

causa-prima
Member
Registered: 2013-07-21
Posts: 24

Re: The AMD/ATI Bar & Grill

causa-prima wrote:

Alternatively I'd like to know another way of getting rid of those underscan borders. Any ideas (exept via image transformation with xrandr, bad image quality with that)?

I had another look into the wiki, and "Not using full screen resolution at 1920x1080 (underscanning, black borders around the screen)" was exactly my problem. Last time I looked there (some month ago) it was not there, so my bad.

Still, the problem I had might be a bug.

Offline

#6622 2014-06-20 23:15:46

OramahMaalhur
Member
From: Kiev, Ukraine
Registered: 2012-02-14
Posts: 15
Website

Re: The AMD/ATI Bar & Grill

Hello.
I face very annoying problem, which leads to X crash. I have Dell Inspiron 7520 laptop with Radeon HD 7730M and Arch Linux x86_64 with the latest catalyst pxp 14.6, linux-ck 3.14.8, Xorg 1.14.5  and all other packages are up to date  (actualy, for the first time I've faced this issue long time ago and still able to reproduce it through different versions of kernel, X and catalyst).

So, my steps to reproduce:

1. open Firefox (by some reason this cannot be reproduced in chrome/chromium)
2. go to https://www.google.com.ua/search?q=arch … S:official  or any other google link with youtube in search results
3. try to drag and drop any youtube preview image on this page

Expected xorg crash with segfault.

Well, it's not hardly linked to youtube preview image, X server could crash in other cases when some "heavy" image with link is dragged in FF, but I haven't discovered any dependency between html tag and segfault.

Could anybody reproduce this? Is it a known issue?  If so, is there a workaround (except not dragging such kind of content in FF, because it could be done by accident) ?

Слава Україні!

Offline

#6623 2014-06-21 10:59:37

Aldur
Member
Registered: 2013-06-19
Posts: 15

Re: The AMD/ATI Bar & Grill

That's strange, I tried to reproduce it and used Firefox but I can happily drag around all preview images and nothing happens.

For reference: I'm using the latest catalyst beta, too on a Radeon HD 7950.

Just a quick thought: did you force enable webgl or anything like that in Firefox?

Last edited by Aldur (2014-06-21 11:01:40)

Offline

#6624 2014-06-25 03:57:06

zeroone
Member
Registered: 2014-04-23
Posts: 8

Re: The AMD/ATI Bar & Grill

I wanted to know what the major diferences between Glamor and EXA are. I was using EXA with the radeon drivers but there was massive tearing when whatching videos with mpv, so I switched to Glamor. Now this fixed the tearing but brought a new problem with the composite manager + Steam (which I don't think is relevant for this thread). So I would like to go back to EXA, but does anyone know how to reduce tearing? Or if there are some performance or features that I would be missing from using one or the other?

This is my 20-radeon.conf:

Old (using EXA):

Section "Device"
	Identifier  "Radeon 6670"
	Driver	    "radeon"
	Option      "SWcursor"              "off"
        Option      "EnablePageFlip"        "on"
        Option      "AccelMethod"           "EXA"
        Option      "RenderAccel"           "on"
        Option      "ColorTiling"           "on"
        Option      "EXAVSync"              "off"
        Option      "EXAPixmaps"            "on"
        Option      "AccelDFS"              "on"
EndSection

New (using glamor):

Section "Module"
	Load 	    "dri2"
	Load 	    "glamoregl"
Endsection

Section "Device"
	Identifier  "Radeon 6670"
	Driver	    "radeon"
	Option      "SWcursor"              "off"
        Option      "EnablePageFlip"        "on"
        Option      "AccelMethod"           "glamor"
        Option      "RenderAccel"           "on"
        Option      "ColorTiling"           "on"
        Option      "AccelDFS"              "on"
EndSection

Offline

#6625 2014-06-26 12:13:46

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 12,936

Re: The AMD/ATI Bar & Grill

check 'man radeon' for EXAVSync and try running with it set to "on" .

Edit :

oops, man radeon is the manpage for the open driver, not sure what it's called for the proprietary driver.

https://wiki.archlinux.org/index.php/AM … _Rendering might help.

Last edited by Lone_Wolf (2014-06-26 13:14:28)

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

Pages: 1 … 263 264 265 266 267 … 307

Topic closed

Board footer

Powered by FluxBB