You are not logged in.
- Topics: Active | Unanswered
#1 2014-07-10 22:56:23
- jon.pza
- Member
- Registered: 2014-07-10
- Posts: 10
[SOLVED] Gnome won't boot up after catalyst install
Hello all,
I'm new to Arch, and seem to have been thrown into the deep end here, as it were. I installed the catalyst drivers for my Radeon HD8xxx card in my laptop to try and get some better video performance, and, through the help of the extraordinarily informative wiki, was able to do so. However when it boots now, it stays on the first screen with all the OK's (I removed quiet from my boot options in grub). I have to switch to tty2 (Alt+F2) and log in to start using it. Here's the kicker though: from there I can run startx and work just fine in x with the catalyst drivers. I don't get that, but I'm hoping someone else might. I apologize in advance if this is noobish mistake, but appreciate any pointers I can get.
Here's some relevant technical info:
/var/log/Xorg.0.log (if I understand things correctly, this would be from startx since that's where I'm working now, right?):
[ 49.034]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 49.034] X Protocol Version 11, Revision 0
[ 49.034] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 49.035] Current Operating System: Linux samwise 3.15.4-1-ARCH #1 SMP PREEMPT Mon Jul 7 07:42:54 CEST 2014 x86_64
[ 49.035] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=eb465246-d35b-4dc0-a92a-d948f621ccaa rw nomodeset
[ 49.035] Build Date: 27 June 2014 07:32:26PM
[ 49.035]
[ 49.035] Current version of pixman: 0.32.6
[ 49.035] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 49.035] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 49.036] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 10 16:09:18 2014
[ 49.036] (==) Using config file: "/etc/X11/xorg.conf"
[ 49.037] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 49.037] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 49.037] (==) ServerLayout "aticonfig Layout"
[ 49.037] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 49.037] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 49.037] (**) | |-->Device "aticonfig-Device[0]-0"
[ 49.037] (==) Automatically adding devices
[ 49.037] (==) Automatically enabling devices
[ 49.037] (==) Automatically adding GPU devices
[ 49.037] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 49.037] Entry deleted from font path.
[ 49.037] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 49.037] Entry deleted from font path.
[ 49.037] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 49.037] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 49.037] Entry deleted from font path.
[ 49.037] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 49.037] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 49.037] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 49.037] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 49.037] (II) Loader magic: 0x811cc0
[ 49.037] (II) Module ABI versions:
[ 49.037] X.Org ANSI C Emulation: 0.4
[ 49.037] X.Org Video Driver: 15.0
[ 49.037] X.Org XInput driver : 20.0
[ 49.037] X.Org Server Extension : 8.0
[ 49.038] (--) PCI:*(0:0:1:0) 1002:9995:17aa:510a rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 49.038] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 49.039] Initializing built-in extension Generic Event Extension
[ 49.039] Initializing built-in extension SHAPE
[ 49.039] Initializing built-in extension MIT-SHM
[ 49.039] Initializing built-in extension XInputExtension
[ 49.039] Initializing built-in extension XTEST
[ 49.039] Initializing built-in extension BIG-REQUESTS
[ 49.039] Initializing built-in extension SYNC
[ 49.039] Initializing built-in extension XKEYBOARD
[ 49.039] Initializing built-in extension XC-MISC
[ 49.039] Initializing built-in extension SECURITY
[ 49.039] Initializing built-in extension XINERAMA
[ 49.039] Initializing built-in extension XFIXES
[ 49.040] Initializing built-in extension RENDER
[ 49.040] Initializing built-in extension RANDR
[ 49.040] Initializing built-in extension COMPOSITE
[ 49.040] Initializing built-in extension DAMAGE
[ 49.040] Initializing built-in extension MIT-SCREEN-SAVER
[ 49.040] Initializing built-in extension DOUBLE-BUFFER
[ 49.040] Initializing built-in extension RECORD
[ 49.040] Initializing built-in extension DPMS
[ 49.043] Initializing built-in extension Present
[ 49.045] Initializing built-in extension DRI3
[ 49.048] Initializing built-in extension X-Resource
[ 49.051] Initializing built-in extension XVideo
[ 49.053] Initializing built-in extension XVideo-MotionCompensation
[ 49.056] Initializing built-in extension XFree86-VidModeExtension
[ 49.058] Initializing built-in extension XFree86-DGA
[ 49.061] Initializing built-in extension XFree86-DRI
[ 49.063] Initializing built-in extension DRI2
[ 49.063] (II) "glx" will be loaded by default.
[ 49.063] (II) LoadModule: "glx"
[ 49.064] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 49.064] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 49.064] compiled for 6.9.0, module version = 1.0.0
[ 49.067] Loading extension GLX
[ 49.067] (II) LoadModule: "fglrx"
[ 49.067] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 49.086] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 49.086] compiled for 1.4.99.906, module version = 14.10.2
[ 49.086] Module class: X.Org Video Driver
[ 49.086] (II) Loading sub module "fglrxdrm"
[ 49.086] (II) LoadModule: "fglrxdrm"
[ 49.086] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 49.117] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 49.117] compiled for 1.4.99.906, module version = 14.10.2
[ 49.117] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 49.117] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001
[ 49.117] (II) AMD Proprietary Linux Driver Build Date: May 5 2014 21:38:38
[ 49.117] (++) using VT number 2
[ 49.117] (WW) Falling back to old probe method for fglrx
[ 49.186] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 49.189] ukiDynamicMajor: found major device number 251
[ 49.189] ukiDynamicMajor: found major device number 251
[ 49.189] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 49.189] ukiOpenDevice: node name is /dev/ati/card0
[ 49.189] ukiOpenDevice: open result is 9, (OK)
[ 49.533] ukiOpenByBusid: ukiOpenMinor returns 9
[ 49.533] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 49.629] (--) Chipset Supported AMD Graphics Processor (0x9995) found
[ 49.629] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 49.631] (II) fglrx(0): pEnt->device->identifier=0x12181a0
[ 49.631] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 49.631] (II) Loading sub module "vgahw"
[ 49.631] (II) LoadModule: "vgahw"
[ 49.631] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 49.644] (II) Module vgahw: vendor="X.Org Foundation"
[ 49.644] compiled for 1.15.2, module version = 0.1.0
[ 49.644] ABI class: X.Org Video Driver, version 15.0
[ 49.644] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 49.644] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 49.644] (==) fglrx(0): Default visual is TrueColor
[ 49.645] (**) fglrx(0): Option "DPMS" "true"
[ 49.645] (==) fglrx(0): RGB weight 888
[ 49.645] (II) fglrx(0): Using 8 bits per RGB
[ 49.645] (==) fglrx(0): Buffer Tiling is ON
[ 49.645] (II) Loading sub module "fglrxdrm"
[ 49.645] (II) LoadModule: "fglrxdrm"
[ 49.645] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 49.645] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 49.645] compiled for 1.4.99.906, module version = 14.10.2
[ 49.647] ukiDynamicMajor: found major device number 251
[ 49.647] ukiDynamicMajor: found major device number 251
[ 49.647] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 49.647] ukiOpenDevice: node name is /dev/ati/card0
[ 49.647] ukiOpenDevice: open result is 11, (OK)
[ 49.647] ukiOpenByBusid: ukiOpenMinor returns 11
[ 49.647] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 49.647] (**) fglrx(0): NoAccel = NO
[ 49.647] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 49.647] (--) fglrx(0): Chipset: "AMD Radeon HD 8450G" (Chipset = 0x9995)
[ 49.647] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x510a)
[ 49.647] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 49.647] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 49.647] (--) fglrx(0): MMIO registers at 0xf0300000
[ 49.647] (--) fglrx(0): I/O port at 0x00003000
[ 49.647] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 49.666] (II) fglrx(0): ATIF platform detected
[ 49.670] (II) fglrx(0): AC Adapter is used
[ 49.680] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 49.685] (II) Loading sub module "vbe"
[ 49.685] (II) LoadModule: "vbe"
[ 49.685] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 49.686] (II) Module vbe: vendor="X.Org Foundation"
[ 49.686] compiled for 1.15.2, module version = 1.1.0
[ 49.686] ABI class: X.Org Video Driver, version 15.0
[ 49.690] (II) fglrx(0): VESA BIOS detected
[ 49.690] (II) fglrx(0): VESA VBE Version 3.0
[ 49.690] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 49.690] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 49.690] (II) fglrx(0): VESA VBE OEM Software Rev: 15.31
[ 49.690] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 49.690] (II) fglrx(0): VESA VBE OEM Product: DVST
[ 49.690] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 49.690] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 49.690] (--) fglrx(0): Video RAM: 786432 kByte, Type: DDR3
[ 49.690] (II) fglrx(0): PCIE card detected
[ 49.690] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 49.690] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 49.690] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x30000000)
[ 49.690] (II) fglrx(0): RandR 1.2 support is enabled!
[ 49.690] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 49.691] (II) Loading sub module "fb"
[ 49.691] (II) LoadModule: "fb"
[ 49.691] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 49.692] (II) Module fb: vendor="X.Org Foundation"
[ 49.693] compiled for 1.15.2, module version = 1.0.0
[ 49.693] ABI class: X.Org ANSI C Emulation, version 0.4
[ 49.693] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 49.693] (II) Loading sub module "ddc"
[ 49.693] (II) LoadModule: "ddc"
[ 49.693] (II) Module "ddc" already built-in
[ 49.839] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 49.839] (II) fglrx(0): Output DFP1 has no monitor section
[ 49.839] (II) fglrx(0): Output CRT1 has no monitor section
[ 49.839] (II) Loading sub module "ddc"
[ 49.839] (II) LoadModule: "ddc"
[ 49.839] (II) Module "ddc" already built-in
[ 49.839] (II) fglrx(0): Connected Display0: LVDS
[ 49.839] (II) fglrx(0): Display0 EDID data ---------------------------
[ 49.839] (II) fglrx(0): Manufacturer: LEN Model: 40b0 Serial#: 0
[ 49.839] (II) fglrx(0): Year: 2011 Week: 0
[ 49.839] (II) fglrx(0): EDID Version: 1.3
[ 49.839] (II) fglrx(0): Digital Display Input
[ 49.839] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 49.839] (II) fglrx(0): Gamma: 2.20
[ 49.839] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 49.839] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 49.839] (II) fglrx(0): First detailed timing is preferred mode
[ 49.839] (II) fglrx(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 49.839] (II) fglrx(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 49.839] (II) fglrx(0): Manufacturer's mask: 0
[ 49.839] (II) fglrx(0): Supported detailed timing:
[ 49.839] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 49.839] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 49.839] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 49.839] (II) fglrx(0): Supported detailed timing:
[ 49.839] (II) fglrx(0): clock: 57.8 MHz Image Size: 344 x 193 mm
[ 49.839] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 49.839] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 49.839] (II) fglrx(0): Unknown vendor-specific block f
[ 49.839] (II) fglrx(0): N156BGE-L11
[ 49.839] (II) fglrx(0): EDID (in hex):
[ 49.840] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[ 49.840] (II) fglrx(0): 0015010380231378ea00259e57529929
[ 49.840] (II) fglrx(0): 15505400000001010101010101010101
[ 49.840] (II) fglrx(0): 010101010101121b5664500014301022
[ 49.840] (II) fglrx(0): 260058c1100000189116566450001430
[ 49.840] (II) fglrx(0): 1022260058c1100000180000000f008c
[ 49.840] (II) fglrx(0): 09328c09321609000daea915000000fe
[ 49.840] (II) fglrx(0): 004e3135364247452d4c31310a20007e
[ 49.840] (II) fglrx(0): End of Display0 EDID data --------------------
[ 49.840] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 49.840] (II) fglrx(0): EDID for output LVDS
[ 49.840] (II) fglrx(0): Manufacturer: LEN Model: 40b0 Serial#: 0
[ 49.840] (II) fglrx(0): Year: 2011 Week: 0
[ 49.840] (II) fglrx(0): EDID Version: 1.3
[ 49.840] (II) fglrx(0): Digital Display Input
[ 49.840] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 49.840] (II) fglrx(0): Gamma: 2.20
[ 49.840] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 49.840] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 49.840] (II) fglrx(0): First detailed timing is preferred mode
[ 49.840] (II) fglrx(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 49.840] (II) fglrx(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 49.840] (II) fglrx(0): Manufacturer's mask: 0
[ 49.840] (II) fglrx(0): Supported detailed timing:
[ 49.840] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 49.840] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 49.840] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 49.840] (II) fglrx(0): Supported detailed timing:
[ 49.840] (II) fglrx(0): clock: 57.8 MHz Image Size: 344 x 193 mm
[ 49.840] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 49.840] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 49.840] (II) fglrx(0): Unknown vendor-specific block f
[ 49.840] (II) fglrx(0): N156BGE-L11
[ 49.840] (II) fglrx(0): EDID (in hex):
[ 49.840] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[ 49.840] (II) fglrx(0): 0015010380231378ea00259e57529929
[ 49.840] (II) fglrx(0): 15505400000001010101010101010101
[ 49.840] (II) fglrx(0): 010101010101121b5664500014301022
[ 49.840] (II) fglrx(0): 260058c1100000189116566450001430
[ 49.841] (II) fglrx(0): 1022260058c1100000180000000f008c
[ 49.841] (II) fglrx(0): 09328c09321609000daea915000000fe
[ 49.841] (II) fglrx(0): 004e3135364247452d4c31310a20007e
[ 49.841] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[ 49.841] (II) fglrx(0): Printing DDC gathered Modelines:
[ 49.841] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 49.841] (II) fglrx(0): Modeline "1366x768"x0.0 57.77 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Printing probed modes for output LVDS
[ 49.841] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 49.841] (II) fglrx(0): Modeline "1366x768"x50.0 57.77 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1360x768"x60.0 69.30 1360 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1360x768"x50.0 57.77 1360 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1280x768"x50.0 57.77 1280 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1382 1416 1466 720 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1280x720"x50.0 57.77 1280 1382 1416 1466 720 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1024x768"x50.0 57.77 1024 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1024x600"x60.0 69.30 1024 1382 1416 1466 600 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "1024x600"x50.0 57.77 1024 1382 1416 1466 600 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1382 1416 1466 600 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "800x600"x50.0 57.77 800 1382 1416 1466 600 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "800x480"x60.0 69.30 800 1382 1416 1466 480 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "800x480"x50.0 57.77 800 1382 1416 1466 480 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1382 1416 1466 480 770 776 788 -hsync -vsync (47.3 kHz e)
[ 49.841] (II) fglrx(0): Modeline "640x480"x50.0 57.77 640 1382 1416 1466 480 770 776 788 -hsync -vsync (39.4 kHz e)
[ 49.841] (II) fglrx(0): EDID for output DFP1
[ 49.841] (II) fglrx(0): EDID for output CRT1
[ 49.841] (II) fglrx(0): Output LVDS connected
[ 49.841] (II) fglrx(0): Output DFP1 disconnected
[ 49.841] (II) fglrx(0): Output CRT1 disconnected
[ 49.841] (II) fglrx(0): Using exact sizes for initial modes
[ 49.841] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 49.841] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 49.841] (II) fglrx(0): Display dimensions: (350, 190) mm
[ 49.841] (II) fglrx(0): DPI set to (99, 102)
[ 49.841] (II) fglrx(0): Eyefinity capable adapter detected.
[ 49.841] (II) fglrx(0): Adapter AMD Radeon HD 8450G has 4 configurable heads and 1 displays connected.
[ 49.841] (==) fglrx(0): PseudoColor visuals disabled
[ 49.841] (II) Loading sub module "ramdac"
[ 49.841] (II) LoadModule: "ramdac"
[ 49.841] (II) Module "ramdac" already built-in
[ 49.841] (==) fglrx(0): NoDRI = NO
[ 49.841] (==) fglrx(0): Capabilities: 0x00000000
[ 49.841] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 49.841] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 49.841] (==) fglrx(0): UseFastTLS=0
[ 49.841] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 49.841] (--) Depth 24 pixmap format is 32 bpp
[ 49.841] Loading extension ATIFGLRXDRI
[ 49.841] (II) fglrx(0): doing swlDriScreenInit
[ 49.841] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 49.841] ukiDynamicMajor: found major device number 251
[ 49.841] ukiDynamicMajor: found major device number 251
[ 49.841] ukiDynamicMajor: found major device number 251
[ 49.841] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 49.841] ukiOpenDevice: node name is /dev/ati/card0
[ 49.841] ukiOpenDevice: open result is 12, (OK)
[ 49.841] ukiOpenByBusid: ukiOpenMinor returns 12
[ 49.841] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 49.842] (II) fglrx(0): [uki] DRM interface version 1.0
[ 49.842] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[ 49.842] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 49.842] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f64c6e62000
[ 49.842] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 49.842] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 49.842] (II) fglrx(0): swlDriScreenInit done
[ 49.842] (II) fglrx(0): Kernel Module Version Information:
[ 49.842] (II) fglrx(0): Name: fglrx
[ 49.842] (II) fglrx(0): Version: 14.10.2
[ 49.842] (II) fglrx(0): Date: May 5 2014
[ 49.842] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 49.842] (II) fglrx(0): Kernel Module version matches driver.
[ 49.842] (II) fglrx(0): Kernel Module Build Time Information:
[ 49.842] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.15.4-1-ARCH
[ 49.842] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 49.842] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 49.842] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 49.842] (II) fglrx(0): [uki] register handle = 0x00004000
[ 49.844] (II) fglrx(0): DRI initialization successfull
[ 49.856] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[ 49.862] (==) fglrx(0): Backing store enabled
[ 49.862] Loading extension FGLRXEXTENSION
[ 49.862] (**) fglrx(0): DPMS enabled
[ 49.863] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 49.863] (**) fglrx(0): Textured Video is enabled.
[ 49.863] (II) LoadModule: "glesx"
[ 49.863] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 50.008] (II) Module glesx: vendor="X.Org Foundation"
[ 50.008] compiled for 1.4.99.906, module version = 1.0.0
[ 50.008] Loading extension GLESX
[ 50.008] (II) fglrx(0): GLESX enableFlags = 8784
[ 50.016] (II) fglrx(0): GLESX is enabled
[ 50.017] (II) LoadModule: "amdxmm"
[ 50.017] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 50.035] (II) Module amdxmm: vendor="X.Org Foundation"
[ 50.035] compiled for 1.4.99.906, module version = 2.0.0
[ 50.058] Loading extension AMDXVOPL
[ 50.058] Loading extension AMDXVBA
[ 50.086] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 50.088] (II) fglrx(0): Enable composite support successfully
[ 50.088] (II) fglrx(0): X context handle = 0x1
[ 50.088] (II) fglrx(0): [DRI] installation complete
[ 50.089] (==) fglrx(0): Silken mouse enabled
[ 50.106] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 50.107] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 50.115] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 50.115] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 52.673] (--) RandR disabled
[ 52.679] ukiDynamicMajor: found major device number 251
[ 52.679] ukiDynamicMajor: found major device number 251
[ 52.679] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 52.679] ukiOpenDevice: node name is /dev/ati/card0
[ 52.679] ukiOpenDevice: open result is 13, (OK)
[ 52.679] ukiOpenByBusid: ukiOpenMinor returns 13
[ 52.679] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 52.680] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 52.929] ukiDynamicMajor: found major device number 251
[ 52.929] ukiDynamicMajor: found major device number 251
[ 52.929] ukiDynamicMajor: found major device number 251
[ 52.929] ukiOpenDevice: node name is /dev/ati/card0
[ 52.929] ukiOpenDevice: open result is 14, (OK)
[ 52.929] ukiGetBusid returned 'PCI:0:1:0'
[ 52.929] ukiOpenDevice: node name is /dev/ati/card1
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: Open failed
[ 52.929] ukiOpenDevice: node name is /dev/ati/card2
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: Open failed
[ 52.929] ukiOpenDevice: node name is /dev/ati/card3
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: open result is -1, (No such device)
[ 52.929] ukiOpenDevice: Open failed
[ 52.929] ukiOpenDevice: node name is /dev/ati/card4
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card5
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card6
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card7
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card8
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card9
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.930] ukiOpenDevice: node name is /dev/ati/card10
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: open result is -1, (No such device)
[ 52.930] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card11
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card12
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card13
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card14
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiOpenDevice: node name is /dev/ati/card15
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: open result is -1, (No such device)
[ 52.931] ukiOpenDevice: Open failed
[ 52.931] ukiDynamicMajor: found major device number 251
[ 52.931] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 52.931] ukiOpenDevice: node name is /dev/ati/card0
[ 52.931] ukiOpenDevice: open result is 14, (OK)
[ 52.931] ukiOpenByBusid: ukiOpenMinor returns 14
[ 52.931] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 53.834] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 53.835] ukiDynamicMajor: found major device number 251
[ 53.835] ukiDynamicMajor: found major device number 251
[ 53.835] ukiDynamicMajor: found major device number 251
[ 53.836] ukiOpenDevice: node name is /dev/ati/card0
[ 53.836] ukiOpenDevice: open result is 15, (OK)
[ 53.836] ukiGetBusid returned 'PCI:0:1:0'
[ 53.836] ukiOpenDevice: node name is /dev/ati/card1
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card2
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card3
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card4
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card5
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card6
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card7
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: open result is -1, (No such device)
[ 53.836] ukiOpenDevice: Open failed
[ 53.836] ukiOpenDevice: node name is /dev/ati/card8
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card9
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card10
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card11
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card12
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card13
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card14
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiOpenDevice: node name is /dev/ati/card15
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: open result is -1, (No such device)
[ 53.837] ukiOpenDevice: Open failed
[ 53.837] ukiDynamicMajor: found major device number 251
[ 53.837] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 53.837] ukiOpenDevice: node name is /dev/ati/card0
[ 53.837] ukiOpenDevice: open result is 15, (OK)
[ 53.837] ukiOpenByBusid: ukiOpenMinor returns 15
[ 53.837] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 53.941] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 54.199] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 54.199] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 54.199] (II) LoadModule: "evdev"
[ 54.200] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 54.222] (II) Module evdev: vendor="X.Org Foundation"
[ 54.223] compiled for 1.15.1, module version = 2.9.0
[ 54.223] Module class: X.Org XInput Driver
[ 54.223] ABI class: X.Org XInput driver, version 20.0
[ 54.223] (II) Using input driver 'evdev' for 'Power Button'
[ 54.223] (**) Power Button: always reports core events
[ 54.223] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 54.223] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 54.223] (--) evdev: Power Button: Found keys
[ 54.223] (II) evdev: Power Button: Configuring as keyboard
[ 54.223] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 54.223] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 54.223] (**) Option "xkb_rules" "evdev"
[ 54.223] (**) Option "xkb_model" "pc104"
[ 54.223] (**) Option "xkb_layout" "us"
[ 54.249] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 54.250] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 54.250] (II) Using input driver 'evdev' for 'Video Bus'
[ 54.250] (**) Video Bus: always reports core events
[ 54.250] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 54.250] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 54.250] (--) evdev: Video Bus: Found keys
[ 54.250] (II) evdev: Video Bus: Configuring as keyboard
[ 54.250] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input5/event4"
[ 54.250] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 54.250] (**) Option "xkb_rules" "evdev"
[ 54.250] (**) Option "xkb_model" "pc104"
[ 54.250] (**) Option "xkb_layout" "us"
[ 54.250] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 54.250] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 54.250] (II) Using input driver 'evdev' for 'Power Button'
[ 54.250] (**) Power Button: always reports core events
[ 54.250] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 54.250] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 54.250] (--) evdev: Power Button: Found keys
[ 54.250] (II) evdev: Power Button: Configuring as keyboard
[ 54.250] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[ 54.250] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 54.250] (**) Option "xkb_rules" "evdev"
[ 54.250] (**) Option "xkb_model" "pc104"
[ 54.250] (**) Option "xkb_layout" "us"
[ 54.251] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 54.251] (II) No input driver specified, ignoring this device.
[ 54.251] (II) This device may have been added with another device file.
[ 54.251] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[ 54.251] (II) No input driver specified, ignoring this device.
[ 54.251] (II) This device may have been added with another device file.
[ 54.251] (II) config/udev: Adding input device Integrated Camera (/dev/input/event12)
[ 54.251] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 54.251] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 54.251] (**) Integrated Camera: always reports core events
[ 54.251] (**) evdev: Integrated Camera: Device: "/dev/input/event12"
[ 54.251] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb44d
[ 54.251] (--) evdev: Integrated Camera: Found keys
[ 54.251] (II) evdev: Integrated Camera: Configuring as keyboard
[ 54.251] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb7/7-2/7-2:1.0/input/input14/event12"
[ 54.251] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 54.251] (**) Option "xkb_rules" "evdev"
[ 54.251] (**) Option "xkb_model" "pc104"
[ 54.251] (**) Option "xkb_layout" "us"
[ 54.252] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 54.252] (II) No input driver specified, ignoring this device.
[ 54.252] (II) This device may have been added with another device file.
[ 54.252] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event9)
[ 54.252] (II) No input driver specified, ignoring this device.
[ 54.252] (II) This device may have been added with another device file.
[ 54.252] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event8)
[ 54.252] (II) No input driver specified, ignoring this device.
[ 54.252] (II) This device may have been added with another device file.
[ 54.252] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 54.252] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 54.252] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 54.252] (**) AT Translated Set 2 keyboard: always reports core events
[ 54.252] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 54.252] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 54.252] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 54.252] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 54.252] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 54.252] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 54.252] (**) Option "xkb_rules" "evdev"
[ 54.252] (**) Option "xkb_model" "pc104"
[ 54.252] (**) Option "xkb_layout" "us"
[ 54.253] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 54.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 54.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 54.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 54.253] (II) LoadModule: "synaptics"
[ 54.253] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 54.258] (II) Module synaptics: vendor="X.Org Foundation"
[ 54.258] compiled for 1.15.1, module version = 1.8.0
[ 54.258] Module class: X.Org XInput Driver
[ 54.258] ABI class: X.Org XInput driver, version 20.0
[ 54.258] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 54.258] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 54.258] (**) Option "Device" "/dev/input/event11"
[ 54.384] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5702 (res 51)
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4750 (res 67)
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 54.385] (**) Option "TapButton1" "1"
[ 54.385] (**) Option "TapButton2" "2"
[ 54.385] (**) Option "TapButton3" "3"
[ 54.385] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 54.385] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 54.385] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 54.466] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 54.467] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 54.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 54.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 54.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 54.467] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 54.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 54.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 54.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 54.467] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 54.468] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 54.468] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 54.468] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event13)
[ 54.468] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 54.468] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 54.468] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 54.468] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event13"
[ 54.469] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 54.469] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 54.469] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 54.469] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 54.469] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 54.469] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 54.469] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 54.469] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input13/event13"
[ 54.469] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 54.469] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 54.469] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 54.469] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 54.469] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 54.469] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 54.470] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 54.470] (II) No input driver specified, ignoring this device.
[ 54.470] (II) This device may have been added with another device file.
[ 54.470] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 54.470] (II) No input driver specified, ignoring this device.
[ 54.470] (II) This device may have been added with another device file.
[ 54.471] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[ 54.471] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 54.471] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 54.471] (**) ThinkPad Extra Buttons: always reports core events
[ 54.471] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event6"
[ 54.471] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 54.471] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 54.471] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 54.471] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input8/event6"
[ 54.471] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 54.472] (**) Option "xkb_rules" "evdev"
[ 54.472] (**) Option "xkb_model" "pc104"
[ 54.472] (**) Option "xkb_layout" "us"
[ 54.479] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 1453.877] ukiDynamicMajor: found major device number 251
[ 1453.877] ukiDynamicMajor: found major device number 251
[ 1453.878] ukiDynamicMajor: found major device number 251
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card0
[ 1453.878] ukiOpenDevice: open result is 41, (OK)
[ 1453.878] ukiGetBusid returned 'PCI:0:1:0'
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card1
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card2
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card3
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card4
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card5
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card6
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card7
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card8
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card9
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card10
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card11
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card12
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.878] ukiOpenDevice: Open failed
[ 1453.878] ukiOpenDevice: node name is /dev/ati/card13
[ 1453.878] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: Open failed
[ 1453.879] ukiOpenDevice: node name is /dev/ati/card14
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: Open failed
[ 1453.879] ukiOpenDevice: node name is /dev/ati/card15
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: open result is -1, (No such device)
[ 1453.879] ukiOpenDevice: Open failed
[ 1453.879] ukiDynamicMajor: found major device number 251
[ 1453.879] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1453.879] ukiOpenDevice: node name is /dev/ati/card0
[ 1453.879] ukiOpenDevice: open result is 41, (OK)
[ 1453.879] ukiOpenByBusid: ukiOpenMinor returns 41
[ 1453.879] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0/var/log/Xorg.0.log.old:
[ 144.740]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 144.755] X Protocol Version 11, Revision 0
[ 144.759] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 144.764] Current Operating System: Linux samwise 3.15.4-1-ARCH #1 SMP PREEMPT Mon Jul 7 07:42:54 CEST 2014 x86_64
[ 144.765] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=eb465246-d35b-4dc0-a92a-d948f621ccaa rw nomodeset
[ 144.774] Build Date: 27 June 2014 07:32:26PM
[ 144.779]
[ 144.784] Current version of pixman: 0.32.6
[ 144.793] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 144.793] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 144.812] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 10 13:39:10 2014
[ 144.817] (==) Using config file: "/etc/X11/xorg.conf"
[ 144.821] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 144.826] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 144.826] (==) ServerLayout "aticonfig Layout"
[ 144.826] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 144.826] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 144.826] (**) | |-->Device "aticonfig-Device[0]-0"
[ 144.826] (==) Automatically adding devices
[ 144.826] (==) Automatically enabling devices
[ 144.826] (==) Automatically adding GPU devices
[ 144.826] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 144.826] Entry deleted from font path.
[ 144.826] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 144.826] Entry deleted from font path.
[ 144.826] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 144.826] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 144.826] Entry deleted from font path.
[ 144.826] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 144.826] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 144.826] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 144.826] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 144.826] (II) Loader magic: 0x811cc0
[ 144.826] (II) Module ABI versions:
[ 144.826] X.Org ANSI C Emulation: 0.4
[ 144.827] X.Org Video Driver: 15.0
[ 144.827] X.Org XInput driver : 20.0
[ 144.827] X.Org Server Extension : 8.0
[ 144.828] (--) PCI:*(0:0:1:0) 1002:9995:17aa:510a rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 144.828] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 144.833] Initializing built-in extension Generic Event Extension
[ 144.837] Initializing built-in extension SHAPE
[ 144.842] Initializing built-in extension MIT-SHM
[ 144.846] Initializing built-in extension XInputExtension
[ 144.850] Initializing built-in extension XTEST
[ 144.855] Initializing built-in extension BIG-REQUESTS
[ 144.859] Initializing built-in extension SYNC
[ 144.863] Initializing built-in extension XKEYBOARD
[ 144.867] Initializing built-in extension XC-MISC
[ 144.871] Initializing built-in extension SECURITY
[ 144.875] Initializing built-in extension XINERAMA
[ 144.878] Initializing built-in extension XFIXES
[ 144.882] Initializing built-in extension RENDER
[ 144.886] Initializing built-in extension RANDR
[ 144.889] Initializing built-in extension COMPOSITE
[ 144.893] Initializing built-in extension DAMAGE
[ 144.896] Initializing built-in extension MIT-SCREEN-SAVER
[ 144.899] Initializing built-in extension DOUBLE-BUFFER
[ 144.902] Initializing built-in extension RECORD
[ 144.906] Initializing built-in extension DPMS
[ 144.909] Initializing built-in extension Present
[ 144.911] Initializing built-in extension DRI3
[ 144.914] Initializing built-in extension X-Resource
[ 144.917] Initializing built-in extension XVideo
[ 144.920] Initializing built-in extension XVideo-MotionCompensation
[ 144.923] Initializing built-in extension XFree86-VidModeExtension
[ 144.925] Initializing built-in extension XFree86-DGA
[ 144.928] Initializing built-in extension XFree86-DRI
[ 144.930] Initializing built-in extension DRI2
[ 144.930] (II) "glx" will be loaded by default.
[ 144.930] (II) LoadModule: "glx"
[ 144.930] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 144.931] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 144.931] compiled for 6.9.0, module version = 1.0.0
[ 144.933] Loading extension GLX
[ 144.933] (II) LoadModule: "fglrx"
[ 144.933] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 144.953] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 144.953] compiled for 1.4.99.906, module version = 14.10.2
[ 144.953] Module class: X.Org Video Driver
[ 144.953] (II) Loading sub module "fglrxdrm"
[ 144.953] (II) LoadModule: "fglrxdrm"
[ 144.953] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 144.981] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 144.981] compiled for 1.4.99.906, module version = 14.10.2
[ 144.981] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 144.981] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001
[ 144.982] (II) AMD Proprietary Linux Driver Build Date: May 5 2014 21:38:38
[ 144.982] (++) using VT number 2
[ 144.982] (WW) Falling back to old probe method for fglrx
[ 145.046] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 145.049] ukiDynamicMajor: found major device number 251
[ 145.049] ukiDynamicMajor: found major device number 251
[ 145.049] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 145.049] ukiOpenDevice: node name is /dev/ati/card0
[ 145.049] ukiOpenDevice: open result is 9, (OK)
[ 145.406] ukiOpenByBusid: ukiOpenMinor returns 9
[ 145.407] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 145.493] (--) Chipset Supported AMD Graphics Processor (0x9995) found
[ 145.493] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 145.495] (II) fglrx(0): pEnt->device->identifier=0x17b11a0
[ 145.495] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 145.495] (II) Loading sub module "vgahw"
[ 145.495] (II) LoadModule: "vgahw"
[ 145.496] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 145.508] (II) Module vgahw: vendor="X.Org Foundation"
[ 145.508] compiled for 1.15.2, module version = 0.1.0
[ 145.508] ABI class: X.Org Video Driver, version 15.0
[ 145.509] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 145.509] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 145.509] (==) fglrx(0): Default visual is TrueColor
[ 145.509] (**) fglrx(0): Option "DPMS" "true"
[ 145.509] (==) fglrx(0): RGB weight 888
[ 145.509] (II) fglrx(0): Using 8 bits per RGB
[ 145.509] (==) fglrx(0): Buffer Tiling is ON
[ 145.510] (II) Loading sub module "fglrxdrm"
[ 145.510] (II) LoadModule: "fglrxdrm"
[ 145.510] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 145.510] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 145.510] compiled for 1.4.99.906, module version = 14.10.2
[ 145.513] ukiDynamicMajor: found major device number 251
[ 145.513] ukiDynamicMajor: found major device number 251
[ 145.513] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 145.513] ukiOpenDevice: node name is /dev/ati/card0
[ 145.513] ukiOpenDevice: open result is 11, (OK)
[ 145.513] ukiOpenByBusid: ukiOpenMinor returns 11
[ 145.513] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 145.513] (**) fglrx(0): NoAccel = NO
[ 145.513] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 145.513] (--) fglrx(0): Chipset: "AMD Radeon HD 8450G" (Chipset = 0x9995)
[ 145.513] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x510a)
[ 145.513] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 145.514] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 145.514] (--) fglrx(0): MMIO registers at 0xf0300000
[ 145.514] (--) fglrx(0): I/O port at 0x00003000
[ 145.514] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 145.530] (II) fglrx(0): ATIF platform detected
[ 145.536] (II) fglrx(0): AC Adapter is used
[ 145.556] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 145.560] (II) Loading sub module "vbe"
[ 145.560] (II) LoadModule: "vbe"
[ 145.560] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 145.561] (II) Module vbe: vendor="X.Org Foundation"
[ 145.561] compiled for 1.15.2, module version = 1.1.0
[ 145.561] ABI class: X.Org Video Driver, version 15.0
[ 145.565] (II) fglrx(0): VESA BIOS detected
[ 145.565] (II) fglrx(0): VESA VBE Version 3.0
[ 145.565] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 145.565] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 145.565] (II) fglrx(0): VESA VBE OEM Software Rev: 15.31
[ 145.565] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 145.565] (II) fglrx(0): VESA VBE OEM Product: DVST
[ 145.565] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 145.565] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 145.565] (--) fglrx(0): Video RAM: 786432 kByte, Type: DDR3
[ 145.565] (II) fglrx(0): PCIE card detected
[ 145.565] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 145.565] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 145.565] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x30000000)
[ 145.566] (II) fglrx(0): RandR 1.2 support is enabled!
[ 145.566] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 145.566] (II) Loading sub module "fb"
[ 145.566] (II) LoadModule: "fb"
[ 145.566] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 145.567] (II) Module fb: vendor="X.Org Foundation"
[ 145.567] compiled for 1.15.2, module version = 1.0.0
[ 145.567] ABI class: X.Org ANSI C Emulation, version 0.4
[ 145.567] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 145.567] (II) Loading sub module "ddc"
[ 145.567] (II) LoadModule: "ddc"
[ 145.567] (II) Module "ddc" already built-in
[ 145.714] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 145.714] (II) fglrx(0): Output DFP1 has no monitor section
[ 145.714] (II) fglrx(0): Output CRT1 has no monitor section
[ 145.714] (II) Loading sub module "ddc"
[ 145.714] (II) LoadModule: "ddc"
[ 145.714] (II) Module "ddc" already built-in
[ 145.714] (II) fglrx(0): Connected Display0: LVDS
[ 145.714] (II) fglrx(0): Display0 EDID data ---------------------------
[ 145.714] (II) fglrx(0): Manufacturer: LEN Model: 40b0 Serial#: 0
[ 145.714] (II) fglrx(0): Year: 2011 Week: 0
[ 145.714] (II) fglrx(0): EDID Version: 1.3
[ 145.714] (II) fglrx(0): Digital Display Input
[ 145.714] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 145.714] (II) fglrx(0): Gamma: 2.20
[ 145.714] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 145.714] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 145.714] (II) fglrx(0): First detailed timing is preferred mode
[ 145.714] (II) fglrx(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 145.714] (II) fglrx(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 145.715] (II) fglrx(0): Manufacturer's mask: 0
[ 145.715] (II) fglrx(0): Supported detailed timing:
[ 145.715] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 145.715] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 145.715] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 145.715] (II) fglrx(0): Supported detailed timing:
[ 145.715] (II) fglrx(0): clock: 57.8 MHz Image Size: 344 x 193 mm
[ 145.715] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 145.715] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 145.715] (II) fglrx(0): Unknown vendor-specific block f
[ 145.715] (II) fglrx(0): N156BGE-L11
[ 145.715] (II) fglrx(0): EDID (in hex):
[ 145.715] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[ 145.715] (II) fglrx(0): 0015010380231378ea00259e57529929
[ 145.715] (II) fglrx(0): 15505400000001010101010101010101
[ 145.715] (II) fglrx(0): 010101010101121b5664500014301022
[ 145.715] (II) fglrx(0): 260058c1100000189116566450001430
[ 145.715] (II) fglrx(0): 1022260058c1100000180000000f008c
[ 145.715] (II) fglrx(0): 09328c09321609000daea915000000fe
[ 145.715] (II) fglrx(0): 004e3135364247452d4c31310a20007e
[ 145.715] (II) fglrx(0): End of Display0 EDID data --------------------
[ 145.715] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 145.715] (II) fglrx(0): EDID for output LVDS
[ 145.715] (II) fglrx(0): Manufacturer: LEN Model: 40b0 Serial#: 0
[ 145.715] (II) fglrx(0): Year: 2011 Week: 0
[ 145.715] (II) fglrx(0): EDID Version: 1.3
[ 145.715] (II) fglrx(0): Digital Display Input
[ 145.715] (II) fglrx(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 145.715] (II) fglrx(0): Gamma: 2.20
[ 145.715] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 145.715] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 145.715] (II) fglrx(0): First detailed timing is preferred mode
[ 145.715] (II) fglrx(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 145.715] (II) fglrx(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 145.715] (II) fglrx(0): Manufacturer's mask: 0
[ 145.715] (II) fglrx(0): Supported detailed timing:
[ 145.715] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 145.715] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 145.715] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 145.715] (II) fglrx(0): Supported detailed timing:
[ 145.715] (II) fglrx(0): clock: 57.8 MHz Image Size: 344 x 193 mm
[ 145.715] (II) fglrx(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 145.715] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 145.715] (II) fglrx(0): Unknown vendor-specific block f
[ 145.715] (II) fglrx(0): N156BGE-L11
[ 145.715] (II) fglrx(0): EDID (in hex):
[ 145.715] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[ 145.716] (II) fglrx(0): 0015010380231378ea00259e57529929
[ 145.716] (II) fglrx(0): 15505400000001010101010101010101
[ 145.716] (II) fglrx(0): 010101010101121b5664500014301022
[ 145.716] (II) fglrx(0): 260058c1100000189116566450001430
[ 145.716] (II) fglrx(0): 1022260058c1100000180000000f008c
[ 145.716] (II) fglrx(0): 09328c09321609000daea915000000fe
[ 145.716] (II) fglrx(0): 004e3135364247452d4c31310a20007e
[ 145.716] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[ 145.716] (II) fglrx(0): Printing DDC gathered Modelines:
[ 145.716] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 145.716] (II) fglrx(0): Modeline "1366x768"x0.0 57.77 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Printing probed modes for output LVDS
[ 145.716] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 145.716] (II) fglrx(0): Modeline "1366x768"x50.0 57.77 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1360x768"x60.0 69.30 1360 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1360x768"x50.0 57.77 1360 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1280x768"x50.0 57.77 1280 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1382 1416 1466 720 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1280x720"x50.0 57.77 1280 1382 1416 1466 720 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1024x768"x50.0 57.77 1024 1382 1416 1466 768 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1024x600"x60.0 69.30 1024 1382 1416 1466 600 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "1024x600"x50.0 57.77 1024 1382 1416 1466 600 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1382 1416 1466 600 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "800x600"x50.0 57.77 800 1382 1416 1466 600 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "800x480"x60.0 69.30 800 1382 1416 1466 480 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "800x480"x50.0 57.77 800 1382 1416 1466 480 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1382 1416 1466 480 770 776 788 -hsync -vsync (47.3 kHz e)
[ 145.716] (II) fglrx(0): Modeline "640x480"x50.0 57.77 640 1382 1416 1466 480 770 776 788 -hsync -vsync (39.4 kHz e)
[ 145.716] (II) fglrx(0): EDID for output DFP1
[ 145.716] (II) fglrx(0): EDID for output CRT1
[ 145.716] (II) fglrx(0): Output LVDS connected
[ 145.716] (II) fglrx(0): Output DFP1 disconnected
[ 145.716] (II) fglrx(0): Output CRT1 disconnected
[ 145.716] (II) fglrx(0): Using exact sizes for initial modes
[ 145.716] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 145.716] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 145.716] (II) fglrx(0): Display dimensions: (350, 190) mm
[ 145.716] (II) fglrx(0): DPI set to (99, 102)
[ 145.716] (II) fglrx(0): Eyefinity capable adapter detected.
[ 145.716] (II) fglrx(0): Adapter AMD Radeon HD 8450G has 4 configurable heads and 1 displays connected.
[ 145.716] (==) fglrx(0): PseudoColor visuals disabled
[ 145.716] (II) Loading sub module "ramdac"
[ 145.716] (II) LoadModule: "ramdac"
[ 145.716] (II) Module "ramdac" already built-in
[ 145.716] (==) fglrx(0): NoDRI = NO
[ 145.716] (==) fglrx(0): Capabilities: 0x00000000
[ 145.716] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 145.716] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 145.716] (==) fglrx(0): UseFastTLS=0
[ 145.716] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 145.716] (--) Depth 24 pixmap format is 32 bpp
[ 145.716] Loading extension ATIFGLRXDRI
[ 145.716] (II) fglrx(0): doing swlDriScreenInit
[ 145.716] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 145.717] ukiDynamicMajor: found major device number 251
[ 145.717] ukiDynamicMajor: found major device number 251
[ 145.717] ukiDynamicMajor: found major device number 251
[ 145.717] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 145.717] ukiOpenDevice: node name is /dev/ati/card0
[ 145.717] ukiOpenDevice: open result is 12, (OK)
[ 145.717] ukiOpenByBusid: ukiOpenMinor returns 12
[ 145.717] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 145.717] (II) fglrx(0): [uki] DRM interface version 1.0
[ 145.717] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[ 145.717] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 145.717] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7ff8fab8a000
[ 145.717] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 145.717] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 145.717] (II) fglrx(0): swlDriScreenInit done
[ 145.717] (II) fglrx(0): Kernel Module Version Information:
[ 145.717] (II) fglrx(0): Name: fglrx
[ 145.717] (II) fglrx(0): Version: 14.10.2
[ 145.717] (II) fglrx(0): Date: May 5 2014
[ 145.717] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 145.717] (II) fglrx(0): Kernel Module version matches driver.
[ 145.717] (II) fglrx(0): Kernel Module Build Time Information:
[ 145.717] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.15.4-1-ARCH
[ 145.717] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 145.717] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 145.717] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 145.717] (II) fglrx(0): [uki] register handle = 0x00004000
[ 145.719] (II) fglrx(0): DRI initialization successfull
[ 145.732] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[ 145.737] (==) fglrx(0): Backing store enabled
[ 145.738] Loading extension FGLRXEXTENSION
[ 145.738] (**) fglrx(0): DPMS enabled
[ 145.738] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 145.738] (**) fglrx(0): Textured Video is enabled.
[ 145.738] (II) LoadModule: "glesx"
[ 145.739] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 145.883] (II) Module glesx: vendor="X.Org Foundation"
[ 145.883] compiled for 1.4.99.906, module version = 1.0.0
[ 145.883] Loading extension GLESX
[ 145.883] (II) fglrx(0): GLESX enableFlags = 8784
[ 145.892] (II) fglrx(0): GLESX is enabled
[ 145.892] (II) LoadModule: "amdxmm"
[ 145.892] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 145.910] (II) Module amdxmm: vendor="X.Org Foundation"
[ 145.910] compiled for 1.4.99.906, module version = 2.0.0
[ 145.933] Loading extension AMDXVOPL
[ 145.933] Loading extension AMDXVBA
[ 145.962] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 145.964] (II) fglrx(0): Enable composite support successfully
[ 145.964] (II) fglrx(0): X context handle = 0x1
[ 145.964] (II) fglrx(0): [DRI] installation complete
[ 145.967] (==) fglrx(0): Silken mouse enabled
[ 145.982] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 145.982] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 145.991] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 145.991] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 148.480] (--) RandR disabled
[ 148.487] ukiDynamicMajor: found major device number 251
[ 148.487] ukiDynamicMajor: found major device number 251
[ 148.487] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 148.487] ukiOpenDevice: node name is /dev/ati/card0
[ 148.487] ukiOpenDevice: open result is 13, (OK)
[ 148.487] ukiOpenByBusid: ukiOpenMinor returns 13
[ 148.487] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 148.487] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 148.737] ukiDynamicMajor: found major device number 251
[ 148.737] ukiDynamicMajor: found major device number 251
[ 148.738] ukiDynamicMajor: found major device number 251
[ 148.738] ukiOpenDevice: node name is /dev/ati/card0
[ 148.738] ukiOpenDevice: open result is 14, (OK)
[ 148.738] ukiGetBusid returned 'PCI:0:1:0'
[ 148.738] ukiOpenDevice: node name is /dev/ati/card1
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: Open failed
[ 148.738] ukiOpenDevice: node name is /dev/ati/card2
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: Open failed
[ 148.738] ukiOpenDevice: node name is /dev/ati/card3
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: Open failed
[ 148.738] ukiOpenDevice: node name is /dev/ati/card4
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: Open failed
[ 148.738] ukiOpenDevice: node name is /dev/ati/card5
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.738] ukiOpenDevice: Open failed
[ 148.738] ukiOpenDevice: node name is /dev/ati/card6
[ 148.738] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: Open failed
[ 148.739] ukiOpenDevice: node name is /dev/ati/card7
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: Open failed
[ 148.739] ukiOpenDevice: node name is /dev/ati/card8
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: Open failed
[ 148.739] ukiOpenDevice: node name is /dev/ati/card9
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: Open failed
[ 148.739] ukiOpenDevice: node name is /dev/ati/card10
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: Open failed
[ 148.739] ukiOpenDevice: node name is /dev/ati/card11
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: Open failed
[ 148.739] ukiOpenDevice: node name is /dev/ati/card12
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: Open failed
[ 148.739] ukiOpenDevice: node name is /dev/ati/card13
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.739] ukiOpenDevice: open result is -1, (No such device)
[ 148.740] ukiOpenDevice: Open failed
[ 148.740] ukiOpenDevice: node name is /dev/ati/card14
[ 148.740] ukiOpenDevice: open result is -1, (No such device)
[ 148.740] ukiOpenDevice: open result is -1, (No such device)
[ 148.740] ukiOpenDevice: Open failed
[ 148.740] ukiOpenDevice: node name is /dev/ati/card15
[ 148.740] ukiOpenDevice: open result is -1, (No such device)
[ 148.740] ukiOpenDevice: open result is -1, (No such device)
[ 148.740] ukiOpenDevice: Open failed
[ 148.740] ukiDynamicMajor: found major device number 251
[ 148.740] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 148.740] ukiOpenDevice: node name is /dev/ati/card0
[ 148.740] ukiOpenDevice: open result is 14, (OK)
[ 148.740] ukiOpenByBusid: ukiOpenMinor returns 14
[ 148.740] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 149.676] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 149.678] ukiDynamicMajor: found major device number 251
[ 149.678] ukiDynamicMajor: found major device number 251
[ 149.678] ukiDynamicMajor: found major device number 251
[ 149.678] ukiOpenDevice: node name is /dev/ati/card0
[ 149.678] ukiOpenDevice: open result is 15, (OK)
[ 149.678] ukiGetBusid returned 'PCI:0:1:0'
[ 149.678] ukiOpenDevice: node name is /dev/ati/card1
[ 149.678] ukiOpenDevice: open result is -1, (No such device)
[ 149.678] ukiOpenDevice: open result is -1, (No such device)
[ 149.678] ukiOpenDevice: Open failed
[ 149.678] ukiOpenDevice: node name is /dev/ati/card2
[ 149.678] ukiOpenDevice: open result is -1, (No such device)
[ 149.678] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: Open failed
[ 149.679] ukiOpenDevice: node name is /dev/ati/card3
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: Open failed
[ 149.679] ukiOpenDevice: node name is /dev/ati/card4
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: Open failed
[ 149.679] ukiOpenDevice: node name is /dev/ati/card5
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: Open failed
[ 149.679] ukiOpenDevice: node name is /dev/ati/card6
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: Open failed
[ 149.679] ukiOpenDevice: node name is /dev/ati/card7
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: Open failed
[ 149.679] ukiOpenDevice: node name is /dev/ati/card8
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: Open failed
[ 149.679] ukiOpenDevice: node name is /dev/ati/card9
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.679] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: Open failed
[ 149.680] ukiOpenDevice: node name is /dev/ati/card10
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: Open failed
[ 149.680] ukiOpenDevice: node name is /dev/ati/card11
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: Open failed
[ 149.680] ukiOpenDevice: node name is /dev/ati/card12
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: Open failed
[ 149.680] ukiOpenDevice: node name is /dev/ati/card13
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: Open failed
[ 149.680] ukiOpenDevice: node name is /dev/ati/card14
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: Open failed
[ 149.680] ukiOpenDevice: node name is /dev/ati/card15
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: open result is -1, (No such device)
[ 149.680] ukiOpenDevice: Open failed
[ 149.680] ukiDynamicMajor: found major device number 251
[ 149.680] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 149.680] ukiOpenDevice: node name is /dev/ati/card0
[ 149.680] ukiOpenDevice: open result is 15, (OK)
[ 149.680] ukiOpenByBusid: ukiOpenMinor returns 15
[ 149.680] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 149.857] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 150.119] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 150.119] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 150.119] (II) LoadModule: "evdev"
[ 150.119] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 150.142] (II) Module evdev: vendor="X.Org Foundation"
[ 150.142] compiled for 1.15.1, module version = 2.9.0
[ 150.142] Module class: X.Org XInput Driver
[ 150.142] ABI class: X.Org XInput driver, version 20.0
[ 150.142] (II) Using input driver 'evdev' for 'Power Button'
[ 150.142] (**) Power Button: always reports core events
[ 150.142] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 150.142] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 150.142] (--) evdev: Power Button: Found keys
[ 150.142] (II) evdev: Power Button: Configuring as keyboard
[ 150.142] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 150.142] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 150.143] (**) Option "xkb_rules" "evdev"
[ 150.143] (**) Option "xkb_model" "pc104"
[ 150.143] (**) Option "xkb_layout" "us"
[ 150.174] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 150.174] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 150.174] (II) Using input driver 'evdev' for 'Video Bus'
[ 150.174] (**) Video Bus: always reports core events
[ 150.174] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 150.174] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 150.174] (--) evdev: Video Bus: Found keys
[ 150.174] (II) evdev: Video Bus: Configuring as keyboard
[ 150.174] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input5/event4"
[ 150.174] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 150.174] (**) Option "xkb_rules" "evdev"
[ 150.174] (**) Option "xkb_model" "pc104"
[ 150.174] (**) Option "xkb_layout" "us"
[ 150.175] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 150.175] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 150.175] (II) Using input driver 'evdev' for 'Power Button'
[ 150.175] (**) Power Button: always reports core events
[ 150.175] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 150.175] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 150.175] (--) evdev: Power Button: Found keys
[ 150.175] (II) evdev: Power Button: Configuring as keyboard
[ 150.175] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[ 150.175] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 150.175] (**) Option "xkb_rules" "evdev"
[ 150.175] (**) Option "xkb_model" "pc104"
[ 150.175] (**) Option "xkb_layout" "us"
[ 150.175] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 150.175] (II) No input driver specified, ignoring this device.
[ 150.175] (II) This device may have been added with another device file.
[ 150.175] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[ 150.175] (II) No input driver specified, ignoring this device.
[ 150.175] (II) This device may have been added with another device file.
[ 150.176] (II) config/udev: Adding input device Integrated Camera (/dev/input/event12)
[ 150.176] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 150.176] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 150.176] (**) Integrated Camera: always reports core events
[ 150.176] (**) evdev: Integrated Camera: Device: "/dev/input/event12"
[ 150.176] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb44d
[ 150.176] (--) evdev: Integrated Camera: Found keys
[ 150.176] (II) evdev: Integrated Camera: Configuring as keyboard
[ 150.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb8/8-2/8-2:1.0/input/input14/event12"
[ 150.176] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 150.176] (**) Option "xkb_rules" "evdev"
[ 150.176] (**) Option "xkb_model" "pc104"
[ 150.176] (**) Option "xkb_layout" "us"
[ 150.176] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 150.176] (II) No input driver specified, ignoring this device.
[ 150.176] (II) This device may have been added with another device file.
[ 150.176] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event9)
[ 150.176] (II) No input driver specified, ignoring this device.
[ 150.176] (II) This device may have been added with another device file.
[ 150.177] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event8)
[ 150.177] (II) No input driver specified, ignoring this device.
[ 150.177] (II) This device may have been added with another device file.
[ 150.177] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 150.177] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 150.177] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 150.177] (**) AT Translated Set 2 keyboard: always reports core events
[ 150.177] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 150.177] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 150.177] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 150.177] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 150.177] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 150.177] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 150.177] (**) Option "xkb_rules" "evdev"
[ 150.177] (**) Option "xkb_model" "pc104"
[ 150.177] (**) Option "xkb_layout" "us"
[ 150.177] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 150.177] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 150.177] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 150.177] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 150.177] (II) LoadModule: "synaptics"
[ 150.177] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 150.189] (II) Module synaptics: vendor="X.Org Foundation"
[ 150.189] compiled for 1.15.1, module version = 1.8.0
[ 150.189] Module class: X.Org XInput Driver
[ 150.189] ABI class: X.Org XInput driver, version 20.0
[ 150.189] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 150.189] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 150.189] (**) Option "Device" "/dev/input/event11"
[ 150.360] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 150.360] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5702 (res 51)
[ 150.360] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4750 (res 67)
[ 150.360] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 150.360] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 150.360] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 150.360] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 150.360] (**) Option "TapButton1" "1"
[ 150.360] (**) Option "TapButton2" "2"
[ 150.360] (**) Option "TapButton3" "3"
[ 150.360] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 150.360] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 150.360] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 150.453] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 150.453] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 150.453] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 150.453] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 150.453] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 150.454] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 150.454] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 150.454] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 150.454] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 150.454] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 150.454] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 150.454] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 150.455] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event13)
[ 150.455] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 150.455] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 150.455] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 150.455] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event13"
[ 150.455] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 150.455] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 150.455] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 150.455] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 150.455] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 150.455] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 150.455] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 150.455] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input13/event13"
[ 150.455] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 150.455] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 150.456] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 150.456] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 150.456] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 150.456] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 150.456] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 150.456] (II) No input driver specified, ignoring this device.
[ 150.456] (II) This device may have been added with another device file.
[ 150.457] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 150.457] (II) No input driver specified, ignoring this device.
[ 150.457] (II) This device may have been added with another device file.
[ 150.458] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[ 150.458] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 150.458] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 150.458] (**) ThinkPad Extra Buttons: always reports core events
[ 150.458] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event6"
[ 150.458] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 150.458] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 150.458] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 150.458] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event6"
[ 150.458] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 150.458] (**) Option "xkb_rules" "evdev"
[ 150.458] (**) Option "xkb_model" "pc104"
[ 150.458] (**) Option "xkb_layout" "us"
[ 150.467] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 6189.309] ukiDynamicMajor: found major device number 251
[ 6189.309] ukiDynamicMajor: found major device number 251
[ 6189.309] ukiDynamicMajor: found major device number 251
[ 6189.309] ukiOpenDevice: node name is /dev/ati/card0
[ 6189.309] ukiOpenDevice: open result is 40, (OK)
[ 6189.309] ukiGetBusid returned 'PCI:0:1:0'
[ 6189.309] ukiOpenDevice: node name is /dev/ati/card1
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: Open failed
[ 6189.309] ukiOpenDevice: node name is /dev/ati/card2
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: Open failed
[ 6189.309] ukiOpenDevice: node name is /dev/ati/card3
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: Open failed
[ 6189.309] ukiOpenDevice: node name is /dev/ati/card4
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: Open failed
[ 6189.309] ukiOpenDevice: node name is /dev/ati/card5
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: open result is -1, (No such device)
[ 6189.309] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card6
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card7
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card8
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card9
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card10
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card11
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card12
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card13
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card14
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card15
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: open result is -1, (No such device)
[ 6189.310] ukiOpenDevice: Open failed
[ 6189.310] ukiDynamicMajor: found major device number 251
[ 6189.310] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 6189.310] ukiOpenDevice: node name is /dev/ati/card0
[ 6189.310] ukiOpenDevice: open result is 40, (OK)
[ 6189.310] ukiOpenByBusid: ukiOpenMinor returns 40
[ 6189.310] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0output from dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 7 07:42:54 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=eb465246-d35b-4dc0-a92a-d948f621ccaa rw nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aa0d9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aa0da000-0x00000000aea12fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aea13000-0x00000000aeb32fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aeb33000-0x00000000aebb2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000aebb3000-0x00000000aebc9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aebca000-0x00000000aefccfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aefcd000-0x00000000af7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20B20011US/20B20011US, BIOS HRET21WW (1.09) 07/03/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 4 base 0000FED80000 mask FFFFFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[ 0.000000] [mem 0x11c000000-0x11edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xaa0d9fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xa9ffffff] page 2M
[ 0.000000] [mem 0xaa000000-0xaa0d9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaebb3000-0xaebc9fff]
[ 0.000000] [mem 0xaebb3000-0xaebc9fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xaefcd000-0xaf7fffff]
[ 0.000000] [mem 0xaefcd000-0xaeffffff] page 4k
[ 0.000000] [mem 0xaf000000-0xaf7fffff] page 2M
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37978000-0x37cb3fff]
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000AEBB2170 0000AC (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: FACP 0x00000000AEB9B000 00010C (v05 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000AEB9D000 011ECB (v02 LENOVO TP-HR 00000210 PTL 00000210)
[ 0.000000] ACPI: FACS 0x00000000AEAFB000 000040
[ 0.000000] ACPI: SLIC 0x00000000AEBB1000 000176 (v01 LENOVO TP-HR 00000210 PTL 00000001)
[ 0.000000] ACPI: ODD8 0x00000000AEBB0000 000109 (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: ODDZ 0x00000000AEBAF000 00037C (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: HPET 0x00000000AEB9A000 000038 (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000AEB99000 00007A (v02 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000AEB98000 00003C (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: SBST 0x00000000AEB97000 000030 (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: FPDT 0x00000000AEB96000 000064 (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000AEB95000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: MSDM 0x00000000AEAFA000 000055 (v03 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000AEB94000 00003E (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000AEB93000 00050E (v02 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000AEB91000 001F6E (v02 AMD AGESA 00000001 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x00000000AEB90000 000180 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: UEFI 0x00000000AEB8F000 0002BA (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: DBG2 0x00000000AEB8E000 00009F (v00 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff]
[ 0.000000] NODE_DATA [mem 0x11eff9000-0x11effdfff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b200000-ffff88011e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xaa0d9fff]
[ 0.000000] node 0: [mem 0xaebb3000-0xaebc9fff]
[ 0.000000] node 0: [mem 0xaefcd000-0xaf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x11effffff]
[ 0.000000] On node 0 totalpages: 825537
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10853 pages used for memmap
[ 0.000000] DMA32 zone: 694564 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaa0da000-0xaea12fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaea13000-0xaeb32fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaeb33000-0xaebb2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaebca000-0xaefccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xb0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 812615
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=eb465246-d35b-4dc0-a92a-d948f621ccaa rw nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a0000000
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xa3ffffff]
[ 0.000000] Memory: 3101632K/3302148K available (5224K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 200516K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 13631488 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2894.443 MHz processor
[ 0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 5791.08 BogoMIPS (lpj=9648143)
[ 0.000029] pid_max: default: 32768 minimum: 301
[ 0.000038] ACPI: Core revision 20140214
[ 0.011535] ACPI: All ACPI Tables successfully acquired
[ 0.034499] Security Framework initialized
[ 0.034508] Yama: becoming mindful.
[ 0.034802] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.036014] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.036567] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.036575] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.036795] Initializing cgroup subsys memory
[ 0.036802] Initializing cgroup subsys devices
[ 0.036805] Initializing cgroup subsys freezer
[ 0.036806] Initializing cgroup subsys net_cls
[ 0.036808] Initializing cgroup subsys blkio
[ 0.036824] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.036828] tseg: 00af800000
[ 0.036830] CPU: Physical Processor ID: 0
[ 0.036831] CPU: Processor Core ID: 0
[ 0.036833] mce: CPU supports 7 MCE banks
[ 0.036844] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
[ 0.036916] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.037600] ftrace: allocating 20226 entries in 80 pages
[ 0.044753] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.288672] smpboot: CPU0: AMD A6-5350M APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
[ 0.394296] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.394301] ... version: 0
[ 0.394303] ... bit width: 48
[ 0.394304] ... generic registers: 6
[ 0.394305] ... value mask: 0000ffffffffffff
[ 0.394306] ... max period: 00007fffffffffff
[ 0.394307] ... fixed-purpose events: 0
[ 0.394307] ... event mask: 000000000000003f
[ 0.411131] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.417826] x86: Booting SMP configuration:
[ 0.417830] .... node #0, CPUs: #1
[ 0.428918] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.431144] x86: Booted up 1 node, 2 CPUs
[ 0.431149] smpboot: Total of 2 processors activated (11582.17 BogoMIPS)
[ 0.431652] devtmpfs: initialized
[ 0.434365] PM: Registering ACPI NVS region [mem 0xaea13000-0xaeb32fff] (1179648 bytes)
[ 0.435218] pinctrl core: initialized pinctrl subsystem
[ 0.435310] RTC time: 22:08:30, date: 07/10/14
[ 0.435357] NET: Registered protocol family 16
[ 0.435462] cpuidle: using governor ladder
[ 0.435464] cpuidle: using governor menu
[ 0.435539] ACPI: bus type PCI registered
[ 0.435541] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.435652] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.435654] PCI: not using MMCONFIG
[ 0.435656] PCI: Using configuration type 1 for base access
[ 0.435657] PCI: Using configuration type 1 for extended access
[ 0.436571] ACPI: Added _OSI(Module Device)
[ 0.436573] ACPI: Added _OSI(Processor Device)
[ 0.436575] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.436576] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.445976] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.558777] ACPI: Dynamic OEM Table Load:
[ 0.558781] ACPI: ODDZ 0x0000000000000000 00037C (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.559362] ACPI: Dynamic OEM Table Load:
[ 0.559364] ACPI: ODD8 0x0000000000000000 000109 (v01 LENOVO TP-HR 00000210 PTL 00000002)
[ 0.561352] ACPI: Interpreter enabled
[ 0.561358] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.561363] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.561381] ACPI: (supports S0 S3 S4 S5)
[ 0.561383] ACPI: Using IOAPIC for interrupt routing
[ 0.561578] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.561943] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.565365] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.565870] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.566110] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.574479] ACPI: Power Resource [FAN0] (on)
[ 0.574584] ACPI: Power Resource [FAN3] (off)
[ 0.675601] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.675609] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.675614] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.676621] acpi PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.676627] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.676914] PCI host bridge to bus 0000:00
[ 0.676917] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.676919] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.676921] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
[ 0.676922] pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
[ 0.676924] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
[ 0.676925] pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
[ 0.676927] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
[ 0.676928] pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
[ 0.676930] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
[ 0.676931] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
[ 0.676933] pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
[ 0.676934] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
[ 0.676936] pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
[ 0.676937] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
[ 0.676939] pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
[ 0.676940] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
[ 0.676941] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
[ 0.676943] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
[ 0.676944] pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
[ 0.676946] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
[ 0.676947] pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
[ 0.676949] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
[ 0.676950] pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
[ 0.676952] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
[ 0.676953] pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff]
[ 0.676955] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[ 0.676956] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfdffffff]
[ 0.676958] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.676959] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.676966] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.677112] pci 0000:00:01.0: [1002:9995] type 00 class 0x030000
[ 0.677120] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.677126] pci 0000:00:01.0: reg 0x14: [io 0x3000-0x30ff]
[ 0.677131] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
[ 0.677165] pci 0000:00:01.0: supports D1 D2
[ 0.677243] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.677250] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
[ 0.677290] pci 0000:00:01.1: supports D1 D2
[ 0.677368] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.677408] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.681423] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.681492] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.681539] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.681602] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.681691] pci 0000:00:07.0: [1022:1417] type 01 class 0x060400
[ 0.681730] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.681780] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.681889] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.681912] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
[ 0.682017] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.682076] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.682176] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[ 0.682197] pci 0000:00:10.1: reg 0x10: [mem 0xf034a000-0xf034bfff 64bit]
[ 0.682302] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.682360] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.682445] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[ 0.682463] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
[ 0.682473] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
[ 0.682483] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
[ 0.682492] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
[ 0.682502] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
[ 0.682512] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
[ 0.682674] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.682688] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
[ 0.682783] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.682876] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.682895] pci 0000:00:12.2: reg 0x10: [mem 0xf034e900-0xf034e9ff]
[ 0.682973] pci 0000:00:12.2: supports D1 D2
[ 0.682975] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.683115] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.683128] pci 0000:00:13.0: reg 0x10: [mem 0xf034c000-0xf034cfff]
[ 0.683222] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.683305] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.683323] pci 0000:00:13.2: reg 0x10: [mem 0xf034e800-0xf034e8ff]
[ 0.683402] pci 0000:00:13.2: supports D1 D2
[ 0.683403] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.683540] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.683721] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.683741] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
[ 0.683804] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.683853] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.683937] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.684116] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.684189] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.684276] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.684352] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.684427] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.684502] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.684580] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.684655] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.684861] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.684879] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.684904] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.684922] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.685000] pci 0000:01:00.0: supports D1 D2
[ 0.685002] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.691313] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.691321] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.691326] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.691487] pci 0000:02:00.0: [10ec:8179] type 00 class 0x028000
[ 0.691566] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.691592] pci 0000:02:00.0: reg 0x18: [mem 0xf0200000-0xf0203fff 64bit]
[ 0.691684] pci 0000:02:00.0: supports D1 D2
[ 0.691685] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.698032] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.698040] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
[ 0.698043] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.698160] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[ 0.698181] pci 0000:03:00.0: reg 0x10: [mem 0xf0100000-0xf0100fff]
[ 0.698293] pci 0000:03:00.0: supports D1 D2
[ 0.698295] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.704657] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.704666] pci 0000:00:07.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.704813] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.704822] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.704824] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
[ 0.704826] pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
[ 0.704828] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
[ 0.704829] pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
[ 0.704831] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
[ 0.704833] pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
[ 0.704834] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
[ 0.704836] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
[ 0.704837] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
[ 0.704839] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
[ 0.704840] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
[ 0.704842] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
[ 0.704844] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
[ 0.704845] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
[ 0.704847] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
[ 0.704848] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
[ 0.704850] pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
[ 0.704852] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
[ 0.704853] pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
[ 0.704855] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
[ 0.704856] pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
[ 0.704858] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
[ 0.704859] pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
[ 0.704861] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.704863] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfdffffff] (subtractive decode)
[ 0.704864] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.704866] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.705294] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
[ 0.705367] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
[ 0.705445] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
[ 0.705522] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[ 0.705584] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[ 0.705633] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[ 0.705682] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[ 0.705730] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[ 0.708201] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.708279] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.708395] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.708403] vgaarb: loaded
[ 0.708404] vgaarb: bridge control possible 0000:00:01.0
[ 0.708429] PCI: Using ACPI for IRQ routing
[ 0.710355] PCI: pci_cache_line_size set to 64 bytes
[ 0.710467] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.710469] e820: reserve RAM buffer [mem 0xaa0da000-0xabffffff]
[ 0.710470] e820: reserve RAM buffer [mem 0xaebca000-0xafffffff]
[ 0.710471] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[ 0.710472] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.710574] NetLabel: Initializing
[ 0.710575] NetLabel: domain hash size = 128
[ 0.710576] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.710587] NetLabel: unlabeled traffic allowed by default
[ 0.710648] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.710652] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.713699] Switched to clocksource hpet
[ 0.720295] pnp: PnP ACPI init
[ 0.720316] ACPI: bus type PNP registered
[ 0.720487] system 00:00: [io 0x0f50-0x0f51] has been reserved
[ 0.720491] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.720493] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.720495] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.720499] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.720857] pnp 00:01: [dma 4]
[ 0.720893] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.720981] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.721018] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.721049] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.721133] pnp 00:05: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.721205] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.721207] system 00:06: [io 0x0530-0x0537] has been reserved
[ 0.721212] system 00:06: [io 0x0700-0x0707] has been reserved
[ 0.721214] system 00:06: [io 0x0800-0x0827] could not be reserved
[ 0.721216] system 00:06: [io 0x0830] has been reserved
[ 0.721218] system 00:06: [io 0x0840-0x0847] has been reserved
[ 0.721219] system 00:06: [io 0x0b00-0x0b1f] has been reserved
[ 0.721221] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.721223] system 00:06: [io 0x0c14] has been reserved
[ 0.721225] system 00:06: [io 0x0c50-0x0c52] has been reserved
[ 0.721226] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.721228] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.721230] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.721232] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.721234] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.721235] system 00:06: [io 0x0cf9] could not be reserved
[ 0.721237] system 00:06: [io 0x8100-0x81ff window] has been reserved
[ 0.721239] system 00:06: [io 0x8200-0x82ff window] has been reserved
[ 0.721242] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.721381] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.721383] system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.721385] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.721387] system 00:07: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.721389] system 00:07: [mem 0xfed61000-0xfed613ff] has been reserved
[ 0.721391] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.721393] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.724020] pnp 00:08: Plug and Play ACPI device, IDs LEN0032 PNP0f13 (active)
[ 0.724058] ACPI: IRQ 7 override to edge, high
[ 0.724136] pnp 00:09: Plug and Play ACPI device, IDs SMB0001 (active)
[ 0.724146] pnp: PnP ACPI: found 10 devices
[ 0.724148] ACPI: bus type PNP unregistered
[ 0.731532] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.731535] pci 0000:00:07.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.731544] pci 0000:00:07.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.731547] pci 0000:00:07.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.731563] pci 0000:00:07.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.731568] pci 0000:00:07.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.731571] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.731573] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.731578] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.731581] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.731583] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
[ 0.731586] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.731590] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.731592] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
[ 0.731595] pci 0000:00:07.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.731598] pci 0000:00:07.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.731601] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.731659] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.731661] pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.731662] pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.731664] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.731666] pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.731667] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.731669] pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.731670] pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.731672] pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.731673] pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.731675] pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.731676] pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.731678] pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.731679] pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.731681] pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.731682] pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
[ 0.731684] pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.731685] pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.731687] pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.731688] pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.731690] pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.731692] pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.731693] pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.731695] pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
[ 0.731696] pci_bus 0000:00: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.731698] pci_bus 0000:00: resource 29 [mem 0xfc000000-0xfdffffff]
[ 0.731699] pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
[ 0.731701] pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
[ 0.731703] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.731705] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.731706] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.731708] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.731710] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.731711] pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.731713] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.731715] pci_bus 0000:04: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.731716] pci_bus 0000:04: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.731718] pci_bus 0000:04: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.731719] pci_bus 0000:04: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.731721] pci_bus 0000:04: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.731722] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.731724] pci_bus 0000:04: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.731725] pci_bus 0000:04: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.731727] pci_bus 0000:04: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.731728] pci_bus 0000:04: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.731730] pci_bus 0000:04: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.731732] pci_bus 0000:04: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.731733] pci_bus 0000:04: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.731735] pci_bus 0000:04: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.731736] pci_bus 0000:04: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.731738] pci_bus 0000:04: resource 19 [mem 0x000de000-0x000dffff]
[ 0.731739] pci_bus 0000:04: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.731741] pci_bus 0000:04: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.731742] pci_bus 0000:04: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.731744] pci_bus 0000:04: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.731745] pci_bus 0000:04: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.731747] pci_bus 0000:04: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.731748] pci_bus 0000:04: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.731750] pci_bus 0000:04: resource 27 [mem 0x000ee000-0x000effff]
[ 0.731751] pci_bus 0000:04: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.731753] pci_bus 0000:04: resource 29 [mem 0xfc000000-0xfdffffff]
[ 0.731754] pci_bus 0000:04: resource 30 [io 0x0000-0x0cf7]
[ 0.731756] pci_bus 0000:04: resource 31 [io 0x0d00-0xffff]
[ 0.731779] NET: Registered protocol family 2
[ 0.731951] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.732053] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.732174] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.732213] TCP: reno registered
[ 0.732223] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.732246] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.732320] NET: Registered protocol family 1
[ 0.732336] pci 0000:00:01.0: Boot video device
[ 0.868135] PCI: CLS 32 bytes, default 64
[ 0.868189] Unpacking initramfs...
[ 0.921832] Freeing initrd memory: 3312K (ffff880037978000 - ffff880037cb4000)
[ 0.921838] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.921841] software IO TLB [mem 0xa60da000-0xaa0da000] (64MB) mapped at [ffff8800a60da000-ffff8800aa0d9fff]
[ 0.922009] perf: AMD NB counters detected
[ 0.922066] LVT offset 0 assigned for vector 0x400
[ 0.922077] perf: AMD IBS detected (0x000000ff)
[ 0.922110] Scanning for low memory corruption every 60 seconds
[ 0.922483] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.933034] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.934741] zbud: loaded
[ 0.934942] VFS: Disk quotas dquot_6.5.2
[ 0.934980] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.935144] msgmni has been set to 6064
[ 0.935194] Key type big_key registered
[ 0.935384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.935455] io scheduler noop registered
[ 0.935456] io scheduler deadline registered
[ 0.935490] io scheduler cfq registered (default)
[ 0.936370] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.936386] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.936419] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[ 0.936420] vesafb: scrolling: redraw
[ 0.936422] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.936675] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 4224k, total 4224k
[ 0.950300] Console: switching to colour frame buffer device 170x48
[ 0.963748] fb0: VESA VGA frame buffer device
[ 0.963790] GHES: HEST is not enabled!
[ 0.963894] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.964371] Linux agpgart interface v0.103
[ 0.964453] rtc_cmos 00:03: RTC can wake from S4
[ 0.964569] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.964599] rtc_cmos 00:03: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.964609] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.964699] TCP: cubic registered
[ 0.964814] NET: Registered protocol family 10
[ 0.965068] NET: Registered protocol family 17
[ 0.965441] registered taskstats version 1
[ 0.965974] Magic number: 6:157:148
[ 0.966003] acpi device:19: hash matches
[ 0.966042] rtc_cmos 00:03: setting system clock to 2014-07-10 22:08:30 UTC (1405030110)
[ 0.966099] PM: Hibernation image not present or could not be loaded.
[ 0.967067] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.967070] Write protecting the kernel read-only data: 8192k
[ 0.970447] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
[ 0.971947] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.980088] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.981815] systemd-udevd[47]: starting version 214
[ 1.001303] rtsx_pci 0000:03:00.0: irq 40 for MSI/MSI-X
[ 1.001320] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 40
[ 1.006015] ACPI: bus type USB registered
[ 1.006044] usbcore: registered new interface driver usbfs
[ 1.006055] usbcore: registered new interface driver hub
[ 1.006701] usbcore: registered new device driver usb
[ 1.008613] QUIRK: Enable AMD PLL fix
[ 1.008636] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.008642] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.008866] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[ 1.008871] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.008874] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.011150] hub 1-0:1.0: USB hub found
[ 1.011347] hub 1-0:1.0: 2 ports detected
[ 1.012055] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.012061] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.013372] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.013752] hub 2-0:1.0: USB hub found
[ 1.013953] hub 2-0:1.0: 2 ports detected
[ 1.015315] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.015326] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.015561] xhci_hcd 0000:00:10.1: irq 44 for MSI/MSI-X
[ 1.015566] xhci_hcd 0000:00:10.1: irq 45 for MSI/MSI-X
[ 1.015571] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
[ 1.018045] SCSI subsystem initialized
[ 1.021269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.021678] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.021892] ohci-pci: OHCI PCI platform driver
[ 1.022610] ehci-pci: EHCI PCI platform driver
[ 1.027324] libata version 3.00 loaded.
[ 1.027860] hub 3-0:1.0: USB hub found
[ 1.027919] hub 3-0:1.0: 2 ports detected
[ 1.028164] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.028170] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 1.036553] hub 4-0:1.0: USB hub found
[ 1.036933] hub 4-0:1.0: 2 ports detected
[ 1.039457] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.039468] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.039508] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
[ 1.043360] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.043404] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.061170] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.095090] hub 5-0:1.0: USB hub found
[ 1.095101] hub 5-0:1.0: 5 ports detected
[ 1.095778] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.095785] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 6
[ 1.095789] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.095801] ehci-pci 0000:00:12.2: debug port 1
[ 1.095845] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034e900
[ 1.104120] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.104385] hub 6-0:1.0: USB hub found
[ 1.104393] hub 6-0:1.0: 5 ports detected
[ 1.160905] hub 5-0:1.0: USB hub found
[ 1.160949] hub 5-0:1.0: 5 ports detected
[ 1.161452] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.161458] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 7
[ 1.161462] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.161474] ehci-pci 0000:00:13.2: debug port 1
[ 1.161505] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034e800
[ 1.170827] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.171111] hub 7-0:1.0: USB hub found
[ 1.171118] hub 7-0:1.0: 5 ports detected
[ 1.171453] ahci 0000:00:11.0: version 3.0
[ 1.171856] ahci 0000:00:11.0: irq 47 for MSI/MSI-X
[ 1.171907] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.171910] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.172459] scsi0 : ahci
[ 1.172623] scsi1 : ahci
[ 1.172755] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 47
[ 1.172759] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 47
[ 1.173281] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.173288] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[ 1.173312] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034c000
[ 1.228532] hub 8-0:1.0: USB hub found
[ 1.228545] hub 8-0:1.0: 5 ports detected
[ 1.477723] usb 7-2: new high-speed USB device number 2 using ehci-pci
[ 1.657788] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.657809] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.658510] ata1.00: ATA-9: WDC WD3200LPVX-08V0TT2, 03.01A03, max UDMA/133
[ 1.658513] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.659130] ata1.00: configured for UDMA/133
[ 1.659238] scsi 0:0:0:0: Direct-Access ATA WDC WD3200LPVX-0 03.0 PQ: 0 ANSI: 5
[ 1.661118] ata2.00: ATAPI: HL-DT-ST DVDRAM GT80N, LN85, max UDMA/133
[ 1.663337] ata2.00: configured for UDMA/133
[ 1.665895] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N LN85 PQ: 0 ANSI: 5
[ 1.679612] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.679617] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.679696] sd 0:0:0:0: [sda] Write Protect is off
[ 1.679699] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.679729] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.691405] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.691410] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.691585] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.780755] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.781398] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.924662] tsc: Refined TSC clocksource calibration: 2894.590 MHz
[ 2.925375] Switched to clocksource tsc
[ 3.023219] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.107494] random: nonblocking pool is initialized
[ 3.515288] systemd[1]: systemd 214 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 3.515435] systemd[1]: Detected architecture 'x86-64'.
[ 3.527589] systemd[1]: Set hostname to <samwise>.
[ 4.305077] systemd[1]: Starting Login Prompts.
[ 4.305235] systemd[1]: Reached target Login Prompts.
[ 4.305245] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.305299] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.305307] systemd[1]: Starting Remote File Systems.
[ 4.305436] systemd[1]: Reached target Remote File Systems.
[ 4.305445] systemd[1]: Starting Encrypted Volumes.
[ 4.305567] systemd[1]: Reached target Encrypted Volumes.
[ 4.305587] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.305855] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.305869] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.305896] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.305903] systemd[1]: Starting Paths.
[ 4.306005] systemd[1]: Reached target Paths.
[ 4.306015] systemd[1]: Expecting device dev-sda7.device...
[ 4.306155] systemd[1]: Expecting device dev-disk-by\x2duuid-f4205c7f\x2d8c30\x2d4694\x2d877b\x2d340bbe747628.device...
[ 4.306374] systemd[1]: Starting Root Slice.
[ 4.310423] systemd[1]: Created slice Root Slice.
[ 4.310436] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.310606] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.310614] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.310761] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.310770] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.310947] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.310955] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.311106] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.311114] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.311266] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.311279] systemd[1]: Starting udev Control Socket.
[ 4.311410] systemd[1]: Listening on udev Control Socket.
[ 4.311421] systemd[1]: Starting udev Kernel Socket.
[ 4.311551] systemd[1]: Listening on udev Kernel Socket.
[ 4.311559] systemd[1]: Starting User and Session Slice.
[ 4.311877] systemd[1]: Created slice User and Session Slice.
[ 4.311892] systemd[1]: Starting Journal Socket.
[ 4.312026] systemd[1]: Listening on Journal Socket.
[ 4.312049] systemd[1]: Starting System Slice.
[ 4.312324] systemd[1]: Created slice System Slice.
[ 4.312338] systemd[1]: Started File System Check on Root Device.
[ 4.312345] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 4.312663] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.312672] systemd[1]: Mounting Temporary Directory...
[ 4.333696] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.343900] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.344673] systemd[1]: Mounting Debug File System...
[ 4.367465] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.367494] systemd[1]: Starting Setup Virtual Console...
[ 4.368608] systemd[1]: Starting Apply Kernel Variables...
[ 4.369295] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.370056] systemd[1]: Mounting Huge Pages File System...
[ 4.371293] systemd[1]: Starting Load Kernel Modules...
[ 4.371983] systemd[1]: Starting udev Coldplug all Devices...
[ 4.372748] systemd[1]: Starting system-getty.slice.
[ 4.373215] systemd[1]: Created slice system-getty.slice.
[ 4.373238] systemd[1]: Starting Journal Service...
[ 4.374034] systemd[1]: Started Journal Service.
[ 4.906998] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 4.963082] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.963088] ACPI: Power Button [PWRB]
[ 4.963158] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 4.989671] systemd-udevd[123]: starting version 214
[ 4.990040] ACPI: Lid Switch [LID0]
[ 4.990120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.990123] ACPI: Power Button [PWRF]
[ 5.094839] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 5.094843] AMD IOMMUv2 functionality not available on this system
[ 5.224557] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.224562] Disabling lock debugging due to kernel taint
[ 5.237842] <6>[fglrx] Maximum main memory to use for locked dma buffers: 2888 MBytes.
[ 5.237938] <6>[fglrx] vendor: 1002 device: 9995 count: 1
[ 5.238364] <6>[fglrx] ioport: bar 1, base 0x3000, size: 0x100
[ 5.239009] <6>[fglrx] Kernel PAT support is enabled
[ 5.239029] <6>[fglrx] module loaded - fglrx 14.10.2 [May 5 2014] with 1 minors
[ 5.597602] ACPI: acpi_idle registered with cpuidle
[ 5.629003] acpi-cpufreq: overriding BIOS provided _PSD data
[ 5.726781] wmi: Mapper loaded
[ 5.798526] ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no)
[ 5.815011] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.822682] acpi device:49: registered as cooling_device2
[ 5.822749] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input5
[ 5.857028] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 5.857083] snd_hda_intel 0000:00:01.1: irq 48 for MSI/MSI-X
[ 5.873252] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
[ 5.892369] sound hdaudioC1D0: CX20590: BIOS auto-probing.
[ 5.892903] sound hdaudioC1D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 5.892908] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.892917] sound hdaudioC1D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 5.892920] sound hdaudioC1D0: mono: mono_out=0x0
[ 5.892923] sound hdaudioC1D0: inputs:
[ 5.892927] sound hdaudioC1D0: Internal Mic=0x23
[ 5.892930] sound hdaudioC1D0: Mic=0x1a
[ 6.012953] Non-volatile memory driver v1.3
[ 6.133892] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.133911] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.134881] r8169 0000:01:00.0: irq 49 for MSI/MSI-X
[ 6.135269] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000654000, 20:1a:06:5e:d4:78, XID 0c900800 IRQ 49
[ 6.135276] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.195175] cfg80211: Calling CRDA to update world regulatory domain
[ 6.297927] ACPI: Battery Slot [BAT0] (battery present)
[ 6.311038] ACPI: AC Adapter [AC] (on-line)
[ 6.468083] rtl8188ee: Using firmware rtlwifi/rtl8188efw.bin
[ 6.468209] rtl8188ee 0000:02:00.0: irq 50 for MSI/MSI-X
[ 6.534999] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 6.535462] rtlwifi: wireless switch is on
[ 6.651592] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 6.651596] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.651598] thinkpad_acpi: ThinkPad BIOS HRET21WW (1.09), EC unknown
[ 6.651599] thinkpad_acpi: Lenovo ThinkPad Edge E545, model 20B20011US
[ 6.652730] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
[ 6.656326] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.656328] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.668215] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 6.675161] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 6.686721] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input7
[ 6.686948] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 6.688382] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 7.625658] Adding 2148348k swap on /dev/sda7. Priority:-1 extents:1 across:2148348k FS
[ 7.732884] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 7.738969] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\_SB_.PCI0.SMB_.SMB0) (20140214/utaddress-258)
[ 7.738977] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.824070] microcode: CPU0: patch_level=0x06001119
[ 7.962046] systemd-udevd[138]: renamed network interface eth0 to enp1s0
[ 8.009273] microcode: CPU1: patch_level=0x06001119
[ 8.009437] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.235355] systemd-udevd[138]: renamed network interface wlan0 to wlp2s0
[ 8.277333] AVX version of gcm_enc/dec engaged.
[ 8.363576] kvm: Nested Virtualization enabled
[ 8.363582] kvm: Nested Paging enabled
[ 8.589191] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x126c00, board id: 2274, fw id: 1214803
[ 8.589212] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 8.660093] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 8.684962] mousedev: PS/2 mouse device common for all mice
[ 8.738307] media: Linux media interface: v0.10
[ 8.746424] Linux video capture interface: v2.00
[ 8.840258] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b44d)
[ 8.849380] input: Integrated Camera as /devices/pci0000:00/0000:00:13.2/usb7/7-2/7-2:1.0/input/input14
[ 8.849724] usbcore: registered new interface driver uvcvideo
[ 8.849729] USB Video Class driver (1.1.1)
[ 8.952496] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 9.044768] systemd-journald[114]: Received request to flush runtime journal from PID 1
[ 12.783909] r8169 0000:01:00.0 enp1s0: link down
[ 12.783917] r8169 0000:01:00.0 enp1s0: link down
[ 12.783953] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 12.985829] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 13.381529] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 14.457728] r8169 0000:01:00.0 enp1s0: link up
[ 14.457741] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 15.085882] wlp2s0: authenticate with c8:d7:19:90:b7:87
[ 15.105355] wlp2s0: send auth to c8:d7:19:90:b7:87 (try 1/3)
[ 15.107098] wlp2s0: authenticated
[ 15.110193] wlp2s0: associate with c8:d7:19:90:b7:87 (try 1/3)
[ 15.115255] wlp2s0: RX AssocResp from c8:d7:19:90:b7:87 (capab=0x401 status=0 aid=2)
[ 15.115383] wlp2s0: associated
[ 15.115479] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 15.115860] wlp2s0: deauthenticating from c8:d7:19:90:b7:87 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 15.147324] cfg80211: Calling CRDA to update world regulatory domain
[ 15.147507] wlp2s0: authenticate with c8:d7:19:90:b7:87
[ 15.157708] wlp2s0: send auth to c8:d7:19:90:b7:87 (try 1/3)
[ 15.159870] wlp2s0: authenticated
[ 15.163503] wlp2s0: associate with c8:d7:19:90:b7:87 (try 1/3)
[ 15.166605] wlp2s0: RX AssocResp from c8:d7:19:90:b7:87 (capab=0x401 status=0 aid=2)
[ 15.166730] wlp2s0: associated
[ 15.367466] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 15.709225] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
[ 25.176057] wlp2s0: deauthenticating from c8:d7:19:90:b7:87 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 25.207183] cfg80211: Calling CRDA to update world regulatory domain
[ 26.408943] wlp2s0: authenticate with c8:d7:19:90:b7:87
[ 26.428068] wlp2s0: send auth to c8:d7:19:90:b7:87 (try 1/3)
[ 26.429671] wlp2s0: authenticated
[ 26.430982] wlp2s0: associate with c8:d7:19:90:b7:87 (try 1/3)
[ 26.434379] wlp2s0: RX AssocResp from c8:d7:19:90:b7:87 (capab=0x401 status=0 aid=2)
[ 26.434490] wlp2s0: associated
[ 49.867659] fglrx_pci 0000:00:01.0: irq 51 for MSI/MSI-X
[ 49.868441] <6>[fglrx] Firegl kernel thread PID: 384
[ 49.868560] <6>[fglrx] Firegl kernel thread PID: 385
[ 49.868670] <6>[fglrx] Firegl kernel thread PID: 386
[ 49.868757] <6>[fglrx] IRQ 51 Enabled
[ 49.872516] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 49.872519] <6>[fglrx] Reserved FB block: Unshared offset:fc63000, size:3000
[ 49.872520] <6>[fglrx] Reserved FB block: Unshared offset:fc66000, size:39a000
[ 49.872522] <6>[fglrx] Reserved FB block: Unshared offset:2ffee000, size:12000
[ 50.029445] <6>[fglrx] ATIF platform detected with notification ID: 0xd0and here's my xorg.conf file (generated with aticonfigure --initial) (I copied this file into xorg.conf.d as 00-server.conf as well, in case gdm was relying solely on new convention, but to no avail):
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:0:1:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection(I don't think that last DRI section is doing anything for me. It's just another thing in a long list that I've tried thus far.)
So what have I missed?
Best Regards,
Jon
Last edited by jon.pza (2014-07-11 20:05:03)
Offline
#2 2014-07-10 23:25:24
- ConnorBehan
- Package Maintainer (PM)
- From: Long Island NY
- Registered: 2007-07-05
- Posts: 1,359
- Website
Re: [SOLVED] Gnome won't boot up after catalyst install
So you can't get to a login screen on tty1, only tty2? Maybe this would change if you tried different framebuffer consoles like vesafb or uvesafb.
6EA3 F3F3 B908 2632 A9CB E931 D53A 0445 B47A 0DAB
Great things come in tar.xz packages.
Offline
#3 2014-07-10 23:48:20
- jon.pza
- Member
- Registered: 2014-07-10
- Posts: 10
Re: [SOLVED] Gnome won't boot up after catalyst install
I guess I should clarify that `startx` is starting Xwindows... it's not starting up gnome. I have enabled gdm.service with systemctl.
Offline
#4 2014-07-11 00:40:58
- jon.pza
- Member
- Registered: 2014-07-10
- Posts: 10
Re: [SOLVED] Gnome won't boot up after catalyst install
... and gnome is starting up just fine with "exec gnome-session" in my .xinitrc file... still no gdm log in on boot though... and I still don't get it. I tried re-installing gnome, even. At least I'm back in gnome now with catalyst drivers... video's a lot nicer!
Last edited by jon.pza (2014-07-11 00:41:26)
Offline
#5 2014-07-11 20:07:42
- jon.pza
- Member
- Registered: 2014-07-10
- Posts: 10
Re: [SOLVED] Gnome won't boot up after catalyst install
The short answer here is this: https://bbs.archlinux.org/viewtopic.php … 9#p1404629 ... some weird incompatibility w/ the catalyst drivers w/ latest gnome... had I really been paying attention to the wiki, I'd have known this. Oh well, it's worth the extra performance to me to use startx. Thanks all for watching. Nothing more to see here. 
Offline