You are not logged in.

#1 2014-07-09 01:50:30

skinney6
Member
From: Oakland, CA
Registered: 2013-05-25
Posts: 46

starting with kernel 3.14 computer resets on boot up.

when arch switched to the 3.13 kernel my computer appears to boot normally then just resets, shuts off and starts rebooting again. Happens still with 3.14 kernel. I have been using lts kernel but that switched to 3.14 just in the last few days. Side note, I really feel that switching the lts kernel from 3.10 to 3.14 is newsworthy.

Anywho, the last thing i notice on the screen is "Automounting fs on demand" or something and something about rfkill.
i removed one of my ssd and one of my gfx cards with same results so i doubt it's a power issue.

Tell me what to do!
Thank you in advance.
You guys have gotten me thru plenty of scrapes in the past.

Here is my boot log http://pastebin.com/1CcFULUr

Last edited by skinney6 (2014-07-09 02:39:27)

Offline

#2 2014-07-09 03:00:56

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 12,975

Re: starting with kernel 3.14 computer resets on boot up.

Could you tell us just a smidgen more about your computer?  Chipset.  Video System. Memory.  Anything?  Did you install x86 or x86_64?


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Like you, I have no idea what you are doing, but I am pretty sure it is wrong...Jasonwryan
----
How to Ask Questions the Smart Way

Offline

#3 2014-07-09 03:08:37

skinney6
Member
From: Oakland, CA
Registered: 2013-05-25
Posts: 46

Re: starting with kernel 3.14 computer resets on boot up.

x86_64
MSI motherboard http://us.msi.com/product/mb/FM2A75IAE53.html
AMD A8-Series A8-5600K Trinity 3.6GHz Socket FM2 Quad-Core 32nm APU, Model: AD560KWOHJBOX.
ssd 60 gig
8 gig ram
additional video card XFX HD-545X-ZQH2 Radeon HD 5450 1GB 64-bit DDR3 PCI Express 2.1 x16 HDCP

also, when this first started i had an old arch usb with an old kernel and i could boot. stupidy i wrote over it so when i made a new arch usb with a new (3.14 kernel) it shuts off durring boot too.

Last edited by skinney6 (2014-07-09 03:32:56)

Offline

#4 2014-07-09 19:21:51

skinney6
Member
From: Oakland, CA
Registered: 2013-05-25
Posts: 46

Re: starting with kernel 3.14 computer resets on boot up.

I have rolled back to kernel 3.10.46-1-lts. i have pacman ignoring packages linux, linux-lts
How long can i hold out like this before stuff starts breaking?

Offline

#5 2014-07-09 20:13:18

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: starting with kernel 3.14 computer resets on boot up.

skinney6 wrote:

How long can i hold out like this before stuff starts breaking?

The problem may not be before stuff starts breaking, but before the system is open to another big vulnerability (like the futex requeue issue a few releases back).

There are the linux-lts310 and linux-lts312 packages available in the AUR if you feel you have to stay with one of those branches.


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#6 2014-07-09 20:23:17

skinney6
Member
From: Oakland, CA
Registered: 2013-05-25
Posts: 46

Re: starting with kernel 3.14 computer resets on boot up.

ah, excellent point.
I will try one of your lts kernels from the aur.
Much appreciated

Last edited by skinney6 (2014-07-09 20:24:52)

Offline

#7 2014-07-11 03:14:01

skinney6
Member
From: Oakland, CA
Registered: 2013-05-25
Posts: 46

Re: starting with kernel 3.14 computer resets on boot up.

There are the linux-lts310 and linux-lts312 packages available in the AUR if you feel you have to stay with one of those branches.

I'm running your lts312. thank you very much.

if i wanted to build again with a custom config do i replace config or config.x86_64?
I am running x86_64 system.

Offline

#8 2014-07-11 08:52:23

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: starting with kernel 3.14 computer resets on boot up.

skinney6 wrote:

There are the linux-lts310 and linux-lts312 packages available in the AUR if you feel you have to stay with one of those branches.

if i wanted to build again with a custom config do i replace config or config.x86_64?
I am running x86_64 system.

You're welcome!

It's probably best to set the _makenconfig= to _makenconfig=y in the PKGBUILD and play around with that to build a custom config (and then unset _makenconfig= after the build if your happy). That'll kick out a nicely created config.x86_64.last file which you can rename to config.x86_64 if you want to use it for future builds.


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#9 2014-07-11 16:18:06

skinney6
Member
From: Oakland, CA
Registered: 2013-05-25
Posts: 46

Re: starting with kernel 3.14 computer resets on boot up.

i want to try make localmodconfig.

Offline

#10 2014-07-11 18:42:33

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: starting with kernel 3.14 computer resets on boot up.

skinney6 wrote:

i want to try make localmodconfig.

Then set the _localmodcfg= option instead of the _makenconfig= in the PKGBUILD.


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#11 2014-07-11 22:55:51

skinney6
Member
From: Oakland, CA
Registered: 2013-05-25
Posts: 46

Re: starting with kernel 3.14 computer resets on boot up.

if i change any of your files the shasums change and validating source fails.
I'll try making my own package this weekend.

Offline

#12 2014-07-12 09:18:48

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: starting with kernel 3.14 computer resets on boot up.

skinney6 wrote:

if i change any of your files the shasums change and validating source fails.
I'll try making my own package this weekend.

You could run makepkg -g to generate your own shasums and replace the ones in the PKGBUILD before running makepkg -s


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#13 2014-07-12 15:40:22

skinney6
Member
From: Oakland, CA
Registered: 2013-05-25
Posts: 46

Re: starting with kernel 3.14 computer resets on boot up.

You could run makepkg -g to generate your own shasums and replace the ones in the PKGBUILD before running makepkg -s

i built my own. i rans sha256sum and put them in one by one. shoulda read the makepkg man page lol.

Where do you find and how do you decide what patches to include?

Thanks for your help btw

actually, since i now know how to change the shasums i might as well use yours

Last edited by skinney6 (2014-07-12 18:24:08)

Offline

#14 2014-07-12 20:02:32

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,162
Website

Re: starting with kernel 3.14 computer resets on boot up.

skinney6 wrote:

Where do you find and how do you decide what patches to include?

For the LTS kernels, the decisions were made by the Arch packagers when the respective kernel first hit [core]. I just took their PKGBUILD and tweaked it into the respective package.


Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

Board footer

Powered by FluxBB