[SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

chaoxifer · 2014-07-13 12:50:47

Hi~
I have a problem with using my usb mouse.
Well.. I'm using laptop and there are two usb-3.0 ports.
One of them is worked correctly, but other is worked only with usb storage device.
When I try to connect usb mouse and keyboard, it won't work at all. ( nothing is printed out with dmesg )

I googled about this issue, but I couldn't find o.O...

Is it problem with kernel ? or hardware!? How can I fix this ?

[    1.176616] ACPI: bus type USB registered
[    1.176646] usbcore: registered new interface driver usbfs
[    1.176658] usbcore: registered new interface driver hub
[    1.177628] usbcore: registered new device driver usb
[    1.178550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.189661] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.189925] hub 1-0:1.0: USB hub found
[    1.192041] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.192239] hub 2-0:1.0: USB hub found
[    1.195303] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.208760] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.208951] hub 3-0:1.0: USB hub found
[    1.548583] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    1.741222] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.741228] usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.901718] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    2.234848] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[    2.568121] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[    2.840667] usbcore: registered new interface driver btusb
[    2.844649] input: LG HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input16
[    2.844722] usbcore: registered new interface driver uvcvideo
[    2.844723] USB Video Class driver (1.1.1)
[    2.860601] usbcore: registered new interface driver usbhid
[    2.860602] usbhid: USB HID core driver
[    2.861624] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:045E:00DD.0001/input/input17
[    2.861727] hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-1/input0
[    2.862942] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:045E:00DD.0002/input/input18
[    2.863039] hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-1/input1
[    2.907910] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    3.031829] hub 3-1:1.0: USB hub found
[    3.048394] scsi4 : SCSI emulation for RTS5139 USB card reader
[    3.048528] usbcore: registered new interface driver rts5139
[  216.214721] usb 1-1: USB disconnect, device number 2
[  216.927102] usb 1-1: new low-speed USB device number 6 using xhci_hcd
[  217.119883] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[  217.119887] usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[  217.127966] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:045E:00DD.0003/input/input23
[  217.128101] hid-generic 0003:045E:00DD.0003: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-1/input0
[  217.138871] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:045E:00DD.0004/input/input24
[  217.139016] hid-generic 0003:045E:00DD.0004: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-1/input1

Last edited by chaoxifer (2014-07-16 08:49:12)

clfarron4 · 2014-07-13 17:02:04

Have you tried downgrading to 3.15.4 to see whether it's that kernel update?

chaoxifer · 2014-07-13 22:13:40

I found some errors from boot:

[   54.955273] USB Video Class driver (1.1.1)
[   55.070710] usbcore: registered new interface driver r8152
[   55.077227] usbcore: registered new interface driver cdc_ether
[   55.230063] usb 2-5: reset high-speed USB device number 7 using xhci_hcd
[   55.230082] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6.
[   55.230085] usb 2-5: hub failed to enable device, error -22
[   55.389868] usb 2-5: reset high-speed USB device number 7 using xhci_hcd
[   55.389894] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6.
[   55.389964] usb 2-5: hub failed to enable device, error -22
[   55.549827] usb 2-5: reset high-speed USB device number 7 using xhci_hcd
[   55.563566] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005f3e1200
[   55.563573] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005f3e1248
[   55.563576] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005f3e1290
[   55.567361] r8152 2-5:1.0 eth0: v1.06.0 (2014/03/03)

I'd tried to rollback to previous kernel version, but it sill won't work at all.

is it hardware problem!?

Last edited by chaoxifer (2014-07-13 22:17:07)

clfarron4 · 2014-07-14 10:31:56

What other updates where performed when your kernel was upgraded to 3.15.5?

chaoxifer · 2014-07-14 14:13:16

Well.. I executed pacman -Syu, so most system packages have been updated.
Anyway, I got new dmesg when It pasted few minutes after booting system.

[  228.041923] usb 1-2: new low-speed USB device number 6 using xhci_hcd
[  228.216510] usb 1-2: device descriptor read/all, error -71
[  228.375078] usb 1-2: new low-speed USB device number 7 using xhci_hcd
[  228.534966] usb 1-2: device descriptor read/64, error -71
[  228.638302] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6.
[  228.638315] usb 1-2: hub failed to enable device, error -22
[  228.798196] usb 1-2: new low-speed USB device number 8 using xhci_hcd
[  228.812966] usb 1-2: device descriptor read/8, error -71
[  228.929432] usb 1-2: device descriptor read/8, error -71
[  229.191283] usb 1-2: new low-speed USB device number 9 using xhci_hcd
[  229.205938] usb 1-2: device descriptor read/8, error -71
[  229.322657] usb 1-2: device descriptor read/8, error -71
[  229.424542] hub 1-0:1.0: unable to enumerate USB device on port 2

I found some articles from ubuntu and they said it caused by usbcore because it tries to use 'new' usbcore scheme.
And the solution in there is

echo Y > /sys/module/usbcore/parameters/old_scheme_first

but it won't work. ;(..

clfarron4 · 2014-07-14 14:47:18

chaoxifer wrote:

clfarron4 wrote:
What other updates where performed when your kernel was upgraded to 3.15.5?
Well.. I executed pacman -Syu, so most system packages have been updated.

Please post the contents of /var/log/pacman.log. Just saying most system packages were updated doesn't really help us.

chaoxifer wrote:

I found some articles from ubuntu and they said it caused by usbcore because it tries to use 'new' usbcore scheme.
And the solution in there is
echo Y > /sys/module/usbcore/parameters/old_scheme_first
but it won't work. ;(..

Maybe the case for Ubuntu, but arch is quite different, so I'm not surprised that didn't work.

allencch · 2014-07-15 07:43:06

May be caused by USB autosuspend. Try this solution http://askubuntu.com/questions/80638/ho … wer-301416

chaoxifer · 2014-07-16 08:47:41

Thanks for every reply.

That wasn't problem of kernel and autosuspend(I tried, but it doesn't have any effect.)
I installed other OS, but it was same. ;( .. I decided to change motherboard .

Arch Linux

#1 2014-07-13 12:50:47

[SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

#2 2014-07-13 17:02:04

Re: [SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

#3 2014-07-13 22:13:40

Re: [SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

#4 2014-07-14 10:31:56

Re: [SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

#5 2014-07-14 14:13:16

Re: [SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

#6 2014-07-14 14:47:18

Re: [SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

#7 2014-07-15 07:43:06

Re: [SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

#8 2014-07-16 08:47:41

Re: [SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

Board footer