You are not logged in.
Hello,
I followed this guide to get my "NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)" running via Nouveau:
https://wiki.archlinux.org/index.php/Bumblebee
But when I do a "primusrun glxgears" or "optirun glxgears", I am getting:
[ERROR]Cannot access secondary GPU - error: [XORG] (EE) systemd-logind: failed to get session: PID 695 does not belong to any known session
Restarting didn't solved. Using bumblebee 3.2.1-3.
I once got this card working via Nvidia driver, but then it stopped working, tried to solve but failed.
This time I would like to use the open driver.
Tried to disable my external monitor to check for a double monitor issue, but got same error.
And this is my /var/log/Xorg.0.log (is this the log that I should post?):
[ 78.143]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 78.143] X Protocol Version 11, Revision 0
[ 78.143] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 78.143] Current Operating System: Linux utopos 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
[ 78.143] Kernel command line: initrd=\initramfs-linux.img cryptdevice=PARTUUID=93c1a557-90ad-4d53-b7c7-d036a8910c7b:nevoeiro root=/dev/mapper/nevoeiro resume=/dev/mapper/nevoeiro resume_offset=81389568 add_efi_memmap
[ 78.143] Build Date: 14 April 2014 08:39:09AM
[ 78.143]
[ 78.143] Current version of pixman: 0.32.4
[ 78.143] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 78.143] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 78.144] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 21 16:07:49 2014
[ 78.194] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 78.194] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 78.215] (==) No Layout section. Using the first Screen section.
[ 78.215] (==) No screen section available. Using defaults.
[ 78.215] (**) |-->Screen "Default Screen Section" (0)
[ 78.215] (**) | |-->Monitor "<default monitor>"
[ 78.216] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 78.216] (==) Automatically adding devices
[ 78.216] (==) Automatically enabling devices
[ 78.216] (==) Automatically adding GPU devices
[ 78.258] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 78.258] Entry deleted from font path.
[ 78.258] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 78.258] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 78.258] Entry deleted from font path.
[ 78.258] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 78.258] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 78.258] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 78.258] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 78.258] (II) Loader magic: 0x804c80
[ 78.258] (II) Module ABI versions:
[ 78.258] X.Org ANSI C Emulation: 0.4
[ 78.258] X.Org Video Driver: 15.0
[ 78.258] X.Org XInput driver : 20.0
[ 78.258] X.Org Server Extension : 8.0
[ 78.258] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 78.813] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 78.814] (--) PCI:*(0:0:2:0) 8086:0166:1043:10ac rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 78.814] (--) PCI: (0:1:0:0) 10de:0de9:1043:10ac rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 78.814] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 78.814] Initializing built-in extension Generic Event Extension
[ 78.814] Initializing built-in extension SHAPE
[ 78.814] Initializing built-in extension MIT-SHM
[ 78.814] Initializing built-in extension XInputExtension
[ 78.814] Initializing built-in extension XTEST
[ 78.814] Initializing built-in extension BIG-REQUESTS
[ 78.814] Initializing built-in extension SYNC
[ 78.814] Initializing built-in extension XKEYBOARD
[ 78.814] Initializing built-in extension XC-MISC
[ 78.815] Initializing built-in extension SECURITY
[ 78.815] Initializing built-in extension XINERAMA
[ 78.815] Initializing built-in extension XFIXES
[ 78.815] Initializing built-in extension RENDER
[ 78.815] Initializing built-in extension RANDR
[ 78.815] Initializing built-in extension COMPOSITE
[ 78.815] Initializing built-in extension DAMAGE
[ 78.815] Initializing built-in extension MIT-SCREEN-SAVER
[ 78.815] Initializing built-in extension DOUBLE-BUFFER
[ 78.816] Initializing built-in extension RECORD
[ 78.816] Initializing built-in extension DPMS
[ 78.817] Initializing built-in extension Present
[ 78.817] Initializing built-in extension DRI3
[ 78.818] Initializing built-in extension X-Resource
[ 78.818] Initializing built-in extension XVideo
[ 78.818] Initializing built-in extension XVideo-MotionCompensation
[ 78.819] Initializing built-in extension XFree86-VidModeExtension
[ 78.819] Initializing built-in extension XFree86-DGA
[ 78.820] Initializing built-in extension XFree86-DRI
[ 78.820] Initializing built-in extension DRI2
[ 78.820] (II) "glx" will be loaded by default.
[ 78.820] (II) LoadModule: "dri2"
[ 78.820] (II) Module "dri2" already built-in
[ 78.820] (II) LoadModule: "glamoregl"
[ 78.821] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 78.866] (II) Module glamoregl: vendor="X.Org Foundation"
[ 78.866] compiled for 1.15.0, module version = 0.6.0
[ 78.866] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.866] (II) LoadModule: "glx"
[ 78.867] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 78.883] (II) Module glx: vendor="X.Org Foundation"
[ 78.883] compiled for 1.15.1, module version = 1.0.0
[ 78.883] ABI class: X.Org Server Extension, version 8.0
[ 78.883] (==) AIGLX enabled
[ 78.884] Loading extension GLX
[ 78.884] (==) Matched intel as autoconfigured driver 0
[ 78.884] (==) Matched nouveau as autoconfigured driver 1
[ 78.884] (==) Matched nvidia as autoconfigured driver 2
[ 78.884] (==) Matched nv as autoconfigured driver 3
[ 78.884] (==) Matched intel as autoconfigured driver 4
[ 78.884] (==) Matched modesetting as autoconfigured driver 5
[ 78.884] (==) Matched fbdev as autoconfigured driver 6
[ 78.884] (==) Matched vesa as autoconfigured driver 7
[ 78.884] (==) Assigned the driver to the xf86ConfigLayout
[ 78.884] (II) LoadModule: "intel"
[ 78.885] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 78.946] (II) Module intel: vendor="X.Org Foundation"
[ 78.946] compiled for 1.15.1, module version = 2.99.912
[ 78.946] Module class: X.Org Video Driver
[ 78.946] ABI class: X.Org Video Driver, version 15.0
[ 78.946] (II) LoadModule: "nouveau"
[ 78.947] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 78.977] (II) Module nouveau: vendor="X.Org Foundation"
[ 78.977] compiled for 1.15.0, module version = 1.0.10
[ 78.977] Module class: X.Org Video Driver
[ 78.977] ABI class: X.Org Video Driver, version 15.0
[ 78.977] (II) LoadModule: "nvidia"
[ 78.977] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 79.083] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 79.083] compiled for 4.0.2, module version = 1.0.0
[ 79.083] Module class: X.Org Video Driver
[ 79.089] ================ WARNING WARNING WARNING WARNING ================
[ 79.094] This server has a video driver ABI version of 15.0 that is not
supported by this NVIDIA driver. Please check
http://www.nvidia.com/ for driver updates or downgrade to an X
server with a supported driver ABI.
[ 79.096] =================================================================
[ 79.097] (EE) NVIDIA: Use the -ignoreABI option to override this check.
[ 79.097] (II) UnloadModule: "nvidia"
[ 79.097] (II) Unloading nvidia
[ 79.097] (EE) Failed to load module "nvidia" (module requirement mismatch, 0)
[ 79.097] (II) LoadModule: "nv"
[ 79.097] (WW) Warning, couldn't open module nv
[ 79.097] (II) UnloadModule: "nv"
[ 79.097] (II) Unloading nv
[ 79.097] (EE) Failed to load module "nv" (module does not exist, 0)
[ 79.097] (II) LoadModule: "modesetting"
[ 79.098] (WW) Warning, couldn't open module modesetting
[ 79.098] (II) UnloadModule: "modesetting"
[ 79.098] (II) Unloading modesetting
[ 79.098] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 79.098] (II) LoadModule: "fbdev"
[ 79.098] (WW) Warning, couldn't open module fbdev
[ 79.098] (II) UnloadModule: "fbdev"
[ 79.098] (II) Unloading fbdev
[ 79.098] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 79.098] (II) LoadModule: "vesa"
[ 79.098] (WW) Warning, couldn't open module vesa
[ 79.098] (II) UnloadModule: "vesa"
[ 79.098] (II) Unloading vesa
[ 79.098] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 79.098] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 79.100] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 79.100] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 79.100] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 79.100] (II) NOUVEAU driver
[ 79.100] (II) NOUVEAU driver for NVIDIA chipset families :
[ 79.100] RIVA TNT (NV04)
[ 79.100] RIVA TNT2 (NV05)
[ 79.100] GeForce 256 (NV10)
[ 79.100] GeForce 2 (NV11, NV15)
[ 79.100] GeForce 4MX (NV17, NV18)
[ 79.100] GeForce 3 (NV20)
[ 79.100] GeForce 4Ti (NV25, NV28)
[ 79.100] GeForce FX (NV3x)
[ 79.100] GeForce 6 (NV4x)
[ 79.100] GeForce 7 (G7x)
[ 79.100] GeForce 8 (G8x)
[ 79.100] GeForce GTX 200 (NVA0)
[ 79.100] GeForce GTX 400 (NVC0)
[ 79.100] (++) using VT number 1
[ 79.119] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 79.123] (II) [drm] nouveau interface version: 1.1.1
[ 79.124] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 79.124] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 79.124] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 79.124] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 79.124] (==) intel(0): RGB weight 888
[ 79.124] (==) intel(0): Default visual is TrueColor
[ 79.124] (**) intel(0): Framebuffer tiled
[ 79.124] (**) intel(0): Pixmaps tiled
[ 79.124] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 79.125] (II) intel(0): Output LVDS1 has no monitor section
[ 79.125] (--) intel(0): Found backlight control interface acpi_video1 (type 'firmware') for output LVDS1
[ 79.125] (II) intel(0): Output VGA2 has no monitor section
[ 79.125] (II) intel(0): Output HDMI1 has no monitor section
[ 79.125] (II) intel(0): Output DP1 has no monitor section
[ 79.125] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 79.125] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 79.125] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 79.125] (--) intel(0): Output VGA2 using initial mode 1920x1080 on pipe 1
[ 79.125] (**) intel(0): TearFree disabled
[ 79.125] (==) intel(0): DPI set to (96, 96)
[ 79.125] (II) Loading sub module "dri3"
[ 79.125] (II) LoadModule: "dri3"
[ 79.125] (WW) Warning, couldn't open module dri3
[ 79.125] (II) UnloadModule: "dri3"
[ 79.125] (II) Unloading dri3
[ 79.125] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[ 79.125] (II) Loading sub module "dri2"
[ 79.125] (II) LoadModule: "dri2"
[ 79.126] (II) Module "dri2" already built-in
[ 79.126] (II) Loading sub module "present"
[ 79.126] (II) LoadModule: "present"
[ 79.126] (WW) Warning, couldn't open module present
[ 79.126] (II) UnloadModule: "present"
[ 79.126] (II) Unloading present
[ 79.126] (EE) intel: Failed to load module "present" (module does not exist, 0)
[ 79.126] (II) Loading sub module "dri2"
[ 79.126] (II) LoadModule: "dri2"
[ 79.126] (II) Module "dri2" already built-in
[ 79.126] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[ 79.126] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 79.126] (==) NOUVEAU(G0): RGB weight 888
[ 79.126] (==) NOUVEAU(G0): Default visual is TrueColor
[ 79.126] (==) NOUVEAU(G0): Using HW cursor
[ 79.126] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 79.126] (==) NOUVEAU(G0): Page flipping enabled
[ 79.126] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 79.142] (II) NOUVEAU(G0): Output VGA-1-1 has no monitor section
[ 79.153] (II) NOUVEAU(G0): EDID for output VGA-1-1
[ 79.153] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-1
[ 79.153] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 79.153] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 79.153] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 79.153] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 79.153] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 79.153] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 79.153] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 79.153] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 79.153] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 79.153] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 79.153] (**) NOUVEAU(G0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 79.153] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 79.153] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 79.153] (II) Loading sub module "fb"
[ 79.153] (II) LoadModule: "fb"
[ 79.153] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 79.176] (II) Module fb: vendor="X.Org Foundation"
[ 79.176] compiled for 1.15.1, module version = 1.0.0
[ 79.176] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.176] (II) Loading sub module "exa"
[ 79.176] (II) LoadModule: "exa"
[ 79.176] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 79.187] (II) Module exa: vendor="X.Org Foundation"
[ 79.187] compiled for 1.15.1, module version = 2.6.0
[ 79.187] ABI class: X.Org Video Driver, version 15.0
[ 79.187] (II) Loading sub module "shadowfb"
[ 79.187] (II) LoadModule: "shadowfb"
[ 79.187] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 79.195] (II) Module shadowfb: vendor="X.Org Foundation"
[ 79.195] compiled for 1.15.1, module version = 1.0.0
[ 79.195] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.195] (==) Depth 24 pixmap format is 32 bpp
[ 79.197] (II) NOUVEAU(G0): Opened GPU channel 0
[ 79.223] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 79.223] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 79.223] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 79.229] (II) EXA(256): Driver allocated offscreen pixmaps
[ 79.229] (II) EXA(256): Driver registered support for the following operations:
[ 79.229] (II) Solid
[ 79.229] (II) Copy
[ 79.229] (II) Composite (RENDER acceleration)
[ 79.229] (II) UploadToScreen
[ 79.229] (II) DownloadFromScreen
[ 79.230] (==) NOUVEAU(G0): Backing store enabled
[ 79.230] (==) NOUVEAU(G0): Silken mouse enabled
[ 79.231] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 79.231] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 79.231] (==) NOUVEAU(G0): DPMS enabled
[ 79.231] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 79.264] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 79.264] (==) intel(0): Backing store enabled
[ 79.264] (==) intel(0): Silken mouse enabled
[ 79.264] (II) intel(0): HW Cursor enabled
[ 79.264] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 79.264] (==) intel(0): DPMS enabled
[ 79.265] (II) intel(0): [DRI2] Setup complete
[ 79.265] (II) intel(0): [DRI2] DRI driver: i965
[ 79.265] (II) intel(0): [DRI2] VDPAU driver: i965
[ 79.265] (II) intel(0): direct rendering: DRI2 enabled
[ 79.265] (==) intel(0): hotplug detection: "enabled"
[ 79.265] (--) RandR disabled
[ 79.475] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 79.475] (II) AIGLX: enabled GLX_ARB_create_context
[ 79.475] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 79.475] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 79.475] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 79.475] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 79.475] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 79.475] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 79.475] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 79.475] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 79.475] (II) AIGLX: Loaded and initialized i965
[ 79.475] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 79.477] (II) NOUVEAU(G0): NVEnterVT is called.
[ 79.503] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 79.516] (II) intel(0): switch to mode 1920x1080@60.0 on VGA2 using pipe 1, position (0, 0), rotation normal, reflection none
[ 79.530] (II) intel(0): Setting screen physical size to 508 x 285
[ 79.927] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 79.927] (**) Power Button: Applying InputClass "system-keyboard"
[ 79.927] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 79.927] (II) LoadModule: "evdev"
[ 79.927] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 79.969] (II) Module evdev: vendor="X.Org Foundation"
[ 79.969] compiled for 1.15.1, module version = 2.9.0
[ 79.969] Module class: X.Org XInput Driver
[ 79.969] ABI class: X.Org XInput driver, version 20.0
[ 79.969] (II) Using input driver 'evdev' for 'Power Button'
[ 79.970] (**) Power Button: always reports core events
[ 79.970] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 79.970] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 79.970] (--) evdev: Power Button: Found keys
[ 79.970] (II) evdev: Power Button: Configuring as keyboard
[ 79.970] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[ 79.970] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 79.970] (**) Option "xkb_rules" "evdev"
[ 79.970] (**) Option "xkb_model" "pc104"
[ 79.970] (**) Option "xkb_layout" "br"
[ 80.055] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[ 80.055] (**) Video Bus: Applying InputClass "system-keyboard"
[ 80.055] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.055] (II) Using input driver 'evdev' for 'Video Bus'
[ 80.055] (**) Video Bus: always reports core events
[ 80.055] (**) evdev: Video Bus: Device: "/dev/input/event16"
[ 80.055] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 80.055] (--) evdev: Video Bus: Found keys
[ 80.055] (II) evdev: Video Bus: Configuring as keyboard
[ 80.055] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input17/event16"
[ 80.055] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 80.055] (**) Option "xkb_rules" "evdev"
[ 80.055] (**) Option "xkb_model" "pc104"
[ 80.055] (**) Option "xkb_layout" "br"
[ 80.056] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 80.056] (**) Video Bus: Applying InputClass "system-keyboard"
[ 80.056] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.056] (II) Using input driver 'evdev' for 'Video Bus'
[ 80.056] (**) Video Bus: always reports core events
[ 80.056] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 80.056] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 80.056] (--) evdev: Video Bus: Found keys
[ 80.056] (II) evdev: Video Bus: Configuring as keyboard
[ 80.056] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input16/event15"
[ 80.056] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 80.056] (**) Option "xkb_rules" "evdev"
[ 80.056] (**) Option "xkb_model" "pc104"
[ 80.056] (**) Option "xkb_layout" "br"
[ 80.056] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 80.057] (**) Power Button: Applying InputClass "system-keyboard"
[ 80.057] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.057] (II) Using input driver 'evdev' for 'Power Button'
[ 80.057] (**) Power Button: always reports core events
[ 80.057] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 80.057] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.057] (--) evdev: Power Button: Found keys
[ 80.057] (II) evdev: Power Button: Configuring as keyboard
[ 80.057] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[ 80.057] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 80.057] (**) Option "xkb_rules" "evdev"
[ 80.057] (**) Option "xkb_model" "pc104"
[ 80.057] (**) Option "xkb_layout" "br"
[ 80.057] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 80.057] (II) No input driver specified, ignoring this device.
[ 80.057] (II) This device may have been added with another device file.
[ 80.058] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 80.058] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 80.058] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 80.058] (II) Using input driver 'evdev' for 'Sleep Button'
[ 80.058] (**) Sleep Button: always reports core events
[ 80.058] (**) evdev: Sleep Button: Device: "/dev/input/event6"
[ 80.058] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 80.058] (--) evdev: Sleep Button: Found keys
[ 80.058] (II) evdev: Sleep Button: Configuring as keyboard
[ 80.058] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event6"
[ 80.058] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 80.058] (**) Option "xkb_rules" "evdev"
[ 80.058] (**) Option "xkb_model" "pc104"
[ 80.058] (**) Option "xkb_layout" "br"
[ 80.059] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 80.059] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 80.059] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 80.059] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 80.059] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 80.059] (**) Logitech USB Optical Mouse: always reports core events
[ 80.059] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 80.060] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 80.060] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 80.060] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 80.060] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 80.060] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C05A.0004/input/input18/event1"
[ 80.060] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 80.060] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 80.060] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 80.060] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 80.060] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 80.060] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 80.061] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 80.061] (II) No input driver specified, ignoring this device.
[ 80.061] (II) This device may have been added with another device file.
[ 80.061] (II) config/udev: Adding input device TrulyErgonomic.com Truly Ergonomic Computer Keyboard (/dev/input/event2)
[ 80.061] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Applying InputClass "system-keyboard"
[ 80.061] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.061] (II) Using input driver 'evdev' for 'TrulyErgonomic.com Truly Ergonomic Computer Keyboard'
[ 80.061] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: always reports core events
[ 80.061] (**) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Device: "/dev/input/event2"
[ 80.061] (--) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Vendor 0xe6a Product 0x30c
[ 80.061] (--) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Found keys
[ 80.061] (II) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Configuring as keyboard
[ 80.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0E6A:030C.0002/input/input3/event2"
[ 80.061] (II) XINPUT: Adding extended input device "TrulyErgonomic.com Truly Ergonomic Computer Keyboard" (type: KEYBOARD, id 12)
[ 80.061] (**) Option "xkb_rules" "evdev"
[ 80.061] (**) Option "xkb_model" "pc104"
[ 80.061] (**) Option "xkb_layout" "br"
[ 80.062] (II) config/udev: Adding input device TrulyErgonomic.com Truly Ergonomic Computer Keyboard (/dev/input/event3)
[ 80.062] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Applying InputClass "system-keyboard"
[ 80.062] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.062] (II) Using input driver 'evdev' for 'TrulyErgonomic.com Truly Ergonomic Computer Keyboard'
[ 80.062] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: always reports core events
[ 80.062] (**) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Device: "/dev/input/event3"
[ 80.062] (--) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Vendor 0xe6a Product 0x30c
[ 80.062] (--) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Found keys
[ 80.062] (II) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Configuring as keyboard
[ 80.062] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:0E6A:030C.0003/input/input4/event3"
[ 80.062] (II) XINPUT: Adding extended input device "TrulyErgonomic.com Truly Ergonomic Computer Keyboard" (type: KEYBOARD, id 13)
[ 80.062] (**) Option "xkb_rules" "evdev"
[ 80.062] (**) Option "xkb_model" "pc104"
[ 80.063] (**) Option "xkb_layout" "br"
[ 80.063] (II) config/udev: Adding input device USB2.0 0.3M UVC WebCam (/dev/input/event14)
[ 80.063] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "system-keyboard"
[ 80.063] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 80.063] (II) Using input driver 'evdev' for 'USB2.0 0.3M UVC WebCam'
[ 80.063] (**) USB2.0 0.3M UVC WebCam: always reports core events
[ 80.063] (**) evdev: USB2.0 0.3M UVC WebCam: Device: "/dev/input/event14"
[ 80.064] (--) evdev: USB2.0 0.3M UVC WebCam: Vendor 0x4f2 Product 0xb2e3
[ 80.064] (--) evdev: USB2.0 0.3M UVC WebCam: Found keys
[ 80.064] (II) evdev: USB2.0 0.3M UVC WebCam: Configuring as keyboard
[ 80.064] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input15/event14"
[ 80.064] (II) XINPUT: Adding extended input device "USB2.0 0.3M UVC WebCam" (type: KEYBOARD, id 14)
[ 80.064] (**) Option "xkb_rules" "evdev"
[ 80.064] (**) Option "xkb_model" "pc104"
[ 80.064] (**) Option "xkb_layout" "br"
[ 80.064] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 80.064] (II) No input driver specified, ignoring this device.
[ 80.064] (II) This device may have been added with another device file.
[ 80.065] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 80.065] (II) No input driver specified, ignoring this device.
[ 80.065] (II) This device may have been added with another device file.
[ 80.065] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 80.065] (II) No input driver specified, ignoring this device.
[ 80.065] (II) This device may have been added with another device file.
[ 80.065] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 80.065] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 80.065] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 80.065] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 80.065] (**) Asus WMI hotkeys: always reports core events
[ 80.065] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event9"
[ 80.066] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 80.066] (--) evdev: Asus WMI hotkeys: Found keys
[ 80.066] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 80.066] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input11/event9"
[ 80.066] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 15)
[ 80.066] (**) Option "xkb_rules" "evdev"
[ 80.066] (**) Option "xkb_model" "pc104"
[ 80.066] (**) Option "xkb_layout" "br"
[ 80.066] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.066] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 80.066] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.066] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 80.066] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.067] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 80.067] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 80.067] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 80.067] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 80.067] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.067] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 80.067] (**) Option "xkb_rules" "evdev"
[ 80.067] (**) Option "xkb_model" "pc104"
[ 80.067] (**) Option "xkb_layout" "br"
[ 80.067] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event13)
[ 80.067] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 80.067] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 80.067] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 80.067] (II) LoadModule: "synaptics"
[ 80.068] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 80.083] (II) Module synaptics: vendor="X.Org Foundation"
[ 80.083] compiled for 1.15.1, module version = 1.8.0
[ 80.083] Module class: X.Org XInput Driver
[ 80.083] ABI class: X.Org XInput driver, version 20.0
[ 80.083] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 80.083] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 80.083] (**) Option "Device" "/dev/input/event13"
[ 80.243] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1793 (res 32)
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 80.243] (**) Option "TapButton1" "1"
[ 80.243] (**) Option "TapButton2" "2"
[ 80.243] (**) Option "TapButton3" "3"
[ 80.243] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 80.243] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 80.330] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event13"
[ 80.330] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 17)
[ 80.330] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 80.330] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 80.330] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.054
[ 80.330] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 80.330] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 80.330] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 80.330] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 80.330] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 80.331] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 80.331] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 80.331] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 80.331] (II) No input driver specified, ignoring this device.
[ 80.331] (II) This device may have been added with another device file.
[ 81.204] (II) intel(0): EDID vendor "LGD", prod id 760
[ 81.204] (II) intel(0): Printing DDC gathered Modelines:
[ 81.204] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 81.219] (II) intel(0): resizing framebuffer to 3286x1080
[ 81.224] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 81.240] (II) intel(0): switch to mode 1920x1080@60.0 on VGA2 using pipe 1, position (0, 0), rotation normal, reflection none
[ 81.247] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (1920, 312), rotation normal, reflection none
Last edited by flecha (2014-07-25 11:23:42)
Offline
Looks like the problem was "nvidia-319-utils" installed. Removing it and restarting seems to have solved it.
Offline
Today, after reboot it reapeard. Any ideas why?
[ 78.143]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 78.143] X Protocol Version 11, Revision 0
[ 78.143] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 78.143] Current Operating System: Linux utopos 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
[ 78.143] Kernel command line: initrd=\initramfs-linux.img cryptdevice=PARTUUID=93c1a557-90ad-4d53-b7c7-d036a8910c7b:nevoeiro root=/dev/mapper/nevoeiro resume=/dev/mapper/nevoeiro resume_offset=81389568 add_efi_memmap
[ 78.143] Build Date: 14 April 2014 08:39:09AM
[ 78.143]
[ 78.143] Current version of pixman: 0.32.4
[ 78.143] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 78.143] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 78.144] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 21 16:07:49 2014
[ 78.194] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 78.194] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 78.215] (==) No Layout section. Using the first Screen section.
[ 78.215] (==) No screen section available. Using defaults.
[ 78.215] (**) |-->Screen "Default Screen Section" (0)
[ 78.215] (**) | |-->Monitor "<default monitor>"
[ 78.216] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 78.216] (==) Automatically adding devices
[ 78.216] (==) Automatically enabling devices
[ 78.216] (==) Automatically adding GPU devices
[ 78.258] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 78.258] Entry deleted from font path.
[ 78.258] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 78.258] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 78.258] Entry deleted from font path.
[ 78.258] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 78.258] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 78.258] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 78.258] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 78.258] (II) Loader magic: 0x804c80
[ 78.258] (II) Module ABI versions:
[ 78.258] X.Org ANSI C Emulation: 0.4
[ 78.258] X.Org Video Driver: 15.0
[ 78.258] X.Org XInput driver : 20.0
[ 78.258] X.Org Server Extension : 8.0
[ 78.258] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 78.813] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 78.814] (--) PCI:*(0:0:2:0) 8086:0166:1043:10ac rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 78.814] (--) PCI: (0:1:0:0) 10de:0de9:1043:10ac rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 78.814] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 78.814] Initializing built-in extension Generic Event Extension
[ 78.814] Initializing built-in extension SHAPE
[ 78.814] Initializing built-in extension MIT-SHM
[ 78.814] Initializing built-in extension XInputExtension
[ 78.814] Initializing built-in extension XTEST
[ 78.814] Initializing built-in extension BIG-REQUESTS
[ 78.814] Initializing built-in extension SYNC
[ 78.814] Initializing built-in extension XKEYBOARD
[ 78.814] Initializing built-in extension XC-MISC
[ 78.815] Initializing built-in extension SECURITY
[ 78.815] Initializing built-in extension XINERAMA
[ 78.815] Initializing built-in extension XFIXES
[ 78.815] Initializing built-in extension RENDER
[ 78.815] Initializing built-in extension RANDR
[ 78.815] Initializing built-in extension COMPOSITE
[ 78.815] Initializing built-in extension DAMAGE
[ 78.815] Initializing built-in extension MIT-SCREEN-SAVER
[ 78.815] Initializing built-in extension DOUBLE-BUFFER
[ 78.816] Initializing built-in extension RECORD
[ 78.816] Initializing built-in extension DPMS
[ 78.817] Initializing built-in extension Present
[ 78.817] Initializing built-in extension DRI3
[ 78.818] Initializing built-in extension X-Resource
[ 78.818] Initializing built-in extension XVideo
[ 78.818] Initializing built-in extension XVideo-MotionCompensation
[ 78.819] Initializing built-in extension XFree86-VidModeExtension
[ 78.819] Initializing built-in extension XFree86-DGA
[ 78.820] Initializing built-in extension XFree86-DRI
[ 78.820] Initializing built-in extension DRI2
[ 78.820] (II) "glx" will be loaded by default.
[ 78.820] (II) LoadModule: "dri2"
[ 78.820] (II) Module "dri2" already built-in
[ 78.820] (II) LoadModule: "glamoregl"
[ 78.821] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 78.866] (II) Module glamoregl: vendor="X.Org Foundation"
[ 78.866] compiled for 1.15.0, module version = 0.6.0
[ 78.866] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.866] (II) LoadModule: "glx"
[ 78.867] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 78.883] (II) Module glx: vendor="X.Org Foundation"
[ 78.883] compiled for 1.15.1, module version = 1.0.0
[ 78.883] ABI class: X.Org Server Extension, version 8.0
[ 78.883] (==) AIGLX enabled
[ 78.884] Loading extension GLX
[ 78.884] (==) Matched intel as autoconfigured driver 0
[ 78.884] (==) Matched nouveau as autoconfigured driver 1
[ 78.884] (==) Matched nvidia as autoconfigured driver 2
[ 78.884] (==) Matched nv as autoconfigured driver 3
[ 78.884] (==) Matched intel as autoconfigured driver 4
[ 78.884] (==) Matched modesetting as autoconfigured driver 5
[ 78.884] (==) Matched fbdev as autoconfigured driver 6
[ 78.884] (==) Matched vesa as autoconfigured driver 7
[ 78.884] (==) Assigned the driver to the xf86ConfigLayout
[ 78.884] (II) LoadModule: "intel"
[ 78.885] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 78.946] (II) Module intel: vendor="X.Org Foundation"
[ 78.946] compiled for 1.15.1, module version = 2.99.912
[ 78.946] Module class: X.Org Video Driver
[ 78.946] ABI class: X.Org Video Driver, version 15.0
[ 78.946] (II) LoadModule: "nouveau"
[ 78.947] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 78.977] (II) Module nouveau: vendor="X.Org Foundation"
[ 78.977] compiled for 1.15.0, module version = 1.0.10
[ 78.977] Module class: X.Org Video Driver
[ 78.977] ABI class: X.Org Video Driver, version 15.0
[ 78.977] (II) LoadModule: "nvidia"
[ 78.977] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 79.083] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 79.083] compiled for 4.0.2, module version = 1.0.0
[ 79.083] Module class: X.Org Video Driver
[ 79.089] ================ WARNING WARNING WARNING WARNING ================
[ 79.094] This server has a video driver ABI version of 15.0 that is not
supported by this NVIDIA driver. Please check
http://www.nvidia.com/ for driver updates or downgrade to an X
server with a supported driver ABI.
[ 79.096] =================================================================
[ 79.097] (EE) NVIDIA: Use the -ignoreABI option to override this check.
[ 79.097] (II) UnloadModule: "nvidia"
[ 79.097] (II) Unloading nvidia
[ 79.097] (EE) Failed to load module "nvidia" (module requirement mismatch, 0)
[ 79.097] (II) LoadModule: "nv"
[ 79.097] (WW) Warning, couldn't open module nv
[ 79.097] (II) UnloadModule: "nv"
[ 79.097] (II) Unloading nv
[ 79.097] (EE) Failed to load module "nv" (module does not exist, 0)
[ 79.097] (II) LoadModule: "modesetting"
[ 79.098] (WW) Warning, couldn't open module modesetting
[ 79.098] (II) UnloadModule: "modesetting"
[ 79.098] (II) Unloading modesetting
[ 79.098] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 79.098] (II) LoadModule: "fbdev"
[ 79.098] (WW) Warning, couldn't open module fbdev
[ 79.098] (II) UnloadModule: "fbdev"
[ 79.098] (II) Unloading fbdev
[ 79.098] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 79.098] (II) LoadModule: "vesa"
[ 79.098] (WW) Warning, couldn't open module vesa
[ 79.098] (II) UnloadModule: "vesa"
[ 79.098] (II) Unloading vesa
[ 79.098] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 79.098] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 79.100] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 79.100] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 79.100] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 79.100] (II) NOUVEAU driver
[ 79.100] (II) NOUVEAU driver for NVIDIA chipset families :
[ 79.100] RIVA TNT (NV04)
[ 79.100] RIVA TNT2 (NV05)
[ 79.100] GeForce 256 (NV10)
[ 79.100] GeForce 2 (NV11, NV15)
[ 79.100] GeForce 4MX (NV17, NV18)
[ 79.100] GeForce 3 (NV20)
[ 79.100] GeForce 4Ti (NV25, NV28)
[ 79.100] GeForce FX (NV3x)
[ 79.100] GeForce 6 (NV4x)
[ 79.100] GeForce 7 (G7x)
[ 79.100] GeForce 8 (G8x)
[ 79.100] GeForce GTX 200 (NVA0)
[ 79.100] GeForce GTX 400 (NVC0)
[ 79.100] (++) using VT number 1
[ 79.119] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 79.123] (II) [drm] nouveau interface version: 1.1.1
[ 79.124] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 79.124] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 79.124] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 79.124] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 79.124] (==) intel(0): RGB weight 888
[ 79.124] (==) intel(0): Default visual is TrueColor
[ 79.124] (**) intel(0): Framebuffer tiled
[ 79.124] (**) intel(0): Pixmaps tiled
[ 79.124] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 79.125] (II) intel(0): Output LVDS1 has no monitor section
[ 79.125] (--) intel(0): Found backlight control interface acpi_video1 (type 'firmware') for output LVDS1
[ 79.125] (II) intel(0): Output VGA2 has no monitor section
[ 79.125] (II) intel(0): Output HDMI1 has no monitor section
[ 79.125] (II) intel(0): Output DP1 has no monitor section
[ 79.125] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 79.125] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 79.125] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 79.125] (--) intel(0): Output VGA2 using initial mode 1920x1080 on pipe 1
[ 79.125] (**) intel(0): TearFree disabled
[ 79.125] (==) intel(0): DPI set to (96, 96)
[ 79.125] (II) Loading sub module "dri3"
[ 79.125] (II) LoadModule: "dri3"
[ 79.125] (WW) Warning, couldn't open module dri3
[ 79.125] (II) UnloadModule: "dri3"
[ 79.125] (II) Unloading dri3
[ 79.125] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[ 79.125] (II) Loading sub module "dri2"
[ 79.125] (II) LoadModule: "dri2"
[ 79.126] (II) Module "dri2" already built-in
[ 79.126] (II) Loading sub module "present"
[ 79.126] (II) LoadModule: "present"
[ 79.126] (WW) Warning, couldn't open module present
[ 79.126] (II) UnloadModule: "present"
[ 79.126] (II) Unloading present
[ 79.126] (EE) intel: Failed to load module "present" (module does not exist, 0)
[ 79.126] (II) Loading sub module "dri2"
[ 79.126] (II) LoadModule: "dri2"
[ 79.126] (II) Module "dri2" already built-in
[ 79.126] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[ 79.126] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 79.126] (==) NOUVEAU(G0): RGB weight 888
[ 79.126] (==) NOUVEAU(G0): Default visual is TrueColor
[ 79.126] (==) NOUVEAU(G0): Using HW cursor
[ 79.126] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 79.126] (==) NOUVEAU(G0): Page flipping enabled
[ 79.126] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 79.142] (II) NOUVEAU(G0): Output VGA-1-1 has no monitor section
[ 79.153] (II) NOUVEAU(G0): EDID for output VGA-1-1
[ 79.153] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-1
[ 79.153] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 79.153] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 79.153] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 79.153] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 79.153] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 79.153] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 79.153] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 79.153] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 79.153] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 79.153] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 79.153] (**) NOUVEAU(G0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 79.153] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 79.153] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 79.153] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 79.153] (II) Loading sub module "fb"
[ 79.153] (II) LoadModule: "fb"
[ 79.153] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 79.176] (II) Module fb: vendor="X.Org Foundation"
[ 79.176] compiled for 1.15.1, module version = 1.0.0
[ 79.176] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.176] (II) Loading sub module "exa"
[ 79.176] (II) LoadModule: "exa"
[ 79.176] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 79.187] (II) Module exa: vendor="X.Org Foundation"
[ 79.187] compiled for 1.15.1, module version = 2.6.0
[ 79.187] ABI class: X.Org Video Driver, version 15.0
[ 79.187] (II) Loading sub module "shadowfb"
[ 79.187] (II) LoadModule: "shadowfb"
[ 79.187] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 79.195] (II) Module shadowfb: vendor="X.Org Foundation"
[ 79.195] compiled for 1.15.1, module version = 1.0.0
[ 79.195] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.195] (==) Depth 24 pixmap format is 32 bpp
[ 79.197] (II) NOUVEAU(G0): Opened GPU channel 0
[ 79.223] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 79.223] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 79.223] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 79.229] (II) EXA(256): Driver allocated offscreen pixmaps
[ 79.229] (II) EXA(256): Driver registered support for the following operations:
[ 79.229] (II) Solid
[ 79.229] (II) Copy
[ 79.229] (II) Composite (RENDER acceleration)
[ 79.229] (II) UploadToScreen
[ 79.229] (II) DownloadFromScreen
[ 79.230] (==) NOUVEAU(G0): Backing store enabled
[ 79.230] (==) NOUVEAU(G0): Silken mouse enabled
[ 79.231] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 79.231] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 79.231] (==) NOUVEAU(G0): DPMS enabled
[ 79.231] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 79.264] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 79.264] (==) intel(0): Backing store enabled
[ 79.264] (==) intel(0): Silken mouse enabled
[ 79.264] (II) intel(0): HW Cursor enabled
[ 79.264] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 79.264] (==) intel(0): DPMS enabled
[ 79.265] (II) intel(0): [DRI2] Setup complete
[ 79.265] (II) intel(0): [DRI2] DRI driver: i965
[ 79.265] (II) intel(0): [DRI2] VDPAU driver: i965
[ 79.265] (II) intel(0): direct rendering: DRI2 enabled
[ 79.265] (==) intel(0): hotplug detection: "enabled"
[ 79.265] (--) RandR disabled
[ 79.475] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 79.475] (II) AIGLX: enabled GLX_ARB_create_context
[ 79.475] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 79.475] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 79.475] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 79.475] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 79.475] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 79.475] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 79.475] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 79.475] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 79.475] (II) AIGLX: Loaded and initialized i965
[ 79.475] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 79.477] (II) NOUVEAU(G0): NVEnterVT is called.
[ 79.503] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 79.516] (II) intel(0): switch to mode 1920x1080@60.0 on VGA2 using pipe 1, position (0, 0), rotation normal, reflection none
[ 79.530] (II) intel(0): Setting screen physical size to 508 x 285
[ 79.927] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 79.927] (**) Power Button: Applying InputClass "system-keyboard"
[ 79.927] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 79.927] (II) LoadModule: "evdev"
[ 79.927] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 79.969] (II) Module evdev: vendor="X.Org Foundation"
[ 79.969] compiled for 1.15.1, module version = 2.9.0
[ 79.969] Module class: X.Org XInput Driver
[ 79.969] ABI class: X.Org XInput driver, version 20.0
[ 79.969] (II) Using input driver 'evdev' for 'Power Button'
[ 79.970] (**) Power Button: always reports core events
[ 79.970] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 79.970] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 79.970] (--) evdev: Power Button: Found keys
[ 79.970] (II) evdev: Power Button: Configuring as keyboard
[ 79.970] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[ 79.970] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 79.970] (**) Option "xkb_rules" "evdev"
[ 79.970] (**) Option "xkb_model" "pc104"
[ 79.970] (**) Option "xkb_layout" "br"
[ 80.055] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[ 80.055] (**) Video Bus: Applying InputClass "system-keyboard"
[ 80.055] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.055] (II) Using input driver 'evdev' for 'Video Bus'
[ 80.055] (**) Video Bus: always reports core events
[ 80.055] (**) evdev: Video Bus: Device: "/dev/input/event16"
[ 80.055] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 80.055] (--) evdev: Video Bus: Found keys
[ 80.055] (II) evdev: Video Bus: Configuring as keyboard
[ 80.055] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input17/event16"
[ 80.055] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 80.055] (**) Option "xkb_rules" "evdev"
[ 80.055] (**) Option "xkb_model" "pc104"
[ 80.055] (**) Option "xkb_layout" "br"
[ 80.056] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 80.056] (**) Video Bus: Applying InputClass "system-keyboard"
[ 80.056] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.056] (II) Using input driver 'evdev' for 'Video Bus'
[ 80.056] (**) Video Bus: always reports core events
[ 80.056] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 80.056] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 80.056] (--) evdev: Video Bus: Found keys
[ 80.056] (II) evdev: Video Bus: Configuring as keyboard
[ 80.056] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input16/event15"
[ 80.056] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 80.056] (**) Option "xkb_rules" "evdev"
[ 80.056] (**) Option "xkb_model" "pc104"
[ 80.056] (**) Option "xkb_layout" "br"
[ 80.056] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 80.057] (**) Power Button: Applying InputClass "system-keyboard"
[ 80.057] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.057] (II) Using input driver 'evdev' for 'Power Button'
[ 80.057] (**) Power Button: always reports core events
[ 80.057] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 80.057] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.057] (--) evdev: Power Button: Found keys
[ 80.057] (II) evdev: Power Button: Configuring as keyboard
[ 80.057] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[ 80.057] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 80.057] (**) Option "xkb_rules" "evdev"
[ 80.057] (**) Option "xkb_model" "pc104"
[ 80.057] (**) Option "xkb_layout" "br"
[ 80.057] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 80.057] (II) No input driver specified, ignoring this device.
[ 80.057] (II) This device may have been added with another device file.
[ 80.058] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 80.058] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 80.058] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 80.058] (II) Using input driver 'evdev' for 'Sleep Button'
[ 80.058] (**) Sleep Button: always reports core events
[ 80.058] (**) evdev: Sleep Button: Device: "/dev/input/event6"
[ 80.058] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 80.058] (--) evdev: Sleep Button: Found keys
[ 80.058] (II) evdev: Sleep Button: Configuring as keyboard
[ 80.058] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event6"
[ 80.058] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 80.058] (**) Option "xkb_rules" "evdev"
[ 80.058] (**) Option "xkb_model" "pc104"
[ 80.058] (**) Option "xkb_layout" "br"
[ 80.059] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 80.059] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 80.059] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 80.059] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 80.059] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 80.059] (**) Logitech USB Optical Mouse: always reports core events
[ 80.059] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 80.060] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 80.060] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 80.060] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 80.060] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 80.060] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 80.060] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C05A.0004/input/input18/event1"
[ 80.060] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 80.060] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 80.060] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 80.060] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 80.060] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 80.060] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 80.061] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 80.061] (II) No input driver specified, ignoring this device.
[ 80.061] (II) This device may have been added with another device file.
[ 80.061] (II) config/udev: Adding input device TrulyErgonomic.com Truly Ergonomic Computer Keyboard (/dev/input/event2)
[ 80.061] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Applying InputClass "system-keyboard"
[ 80.061] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.061] (II) Using input driver 'evdev' for 'TrulyErgonomic.com Truly Ergonomic Computer Keyboard'
[ 80.061] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: always reports core events
[ 80.061] (**) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Device: "/dev/input/event2"
[ 80.061] (--) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Vendor 0xe6a Product 0x30c
[ 80.061] (--) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Found keys
[ 80.061] (II) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Configuring as keyboard
[ 80.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0E6A:030C.0002/input/input3/event2"
[ 80.061] (II) XINPUT: Adding extended input device "TrulyErgonomic.com Truly Ergonomic Computer Keyboard" (type: KEYBOARD, id 12)
[ 80.061] (**) Option "xkb_rules" "evdev"
[ 80.061] (**) Option "xkb_model" "pc104"
[ 80.061] (**) Option "xkb_layout" "br"
[ 80.062] (II) config/udev: Adding input device TrulyErgonomic.com Truly Ergonomic Computer Keyboard (/dev/input/event3)
[ 80.062] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Applying InputClass "system-keyboard"
[ 80.062] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.062] (II) Using input driver 'evdev' for 'TrulyErgonomic.com Truly Ergonomic Computer Keyboard'
[ 80.062] (**) TrulyErgonomic.com Truly Ergonomic Computer Keyboard: always reports core events
[ 80.062] (**) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Device: "/dev/input/event3"
[ 80.062] (--) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Vendor 0xe6a Product 0x30c
[ 80.062] (--) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Found keys
[ 80.062] (II) evdev: TrulyErgonomic.com Truly Ergonomic Computer Keyboard: Configuring as keyboard
[ 80.062] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:0E6A:030C.0003/input/input4/event3"
[ 80.062] (II) XINPUT: Adding extended input device "TrulyErgonomic.com Truly Ergonomic Computer Keyboard" (type: KEYBOARD, id 13)
[ 80.062] (**) Option "xkb_rules" "evdev"
[ 80.062] (**) Option "xkb_model" "pc104"
[ 80.063] (**) Option "xkb_layout" "br"
[ 80.063] (II) config/udev: Adding input device USB2.0 0.3M UVC WebCam (/dev/input/event14)
[ 80.063] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "system-keyboard"
[ 80.063] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 80.063] (II) Using input driver 'evdev' for 'USB2.0 0.3M UVC WebCam'
[ 80.063] (**) USB2.0 0.3M UVC WebCam: always reports core events
[ 80.063] (**) evdev: USB2.0 0.3M UVC WebCam: Device: "/dev/input/event14"
[ 80.064] (--) evdev: USB2.0 0.3M UVC WebCam: Vendor 0x4f2 Product 0xb2e3
[ 80.064] (--) evdev: USB2.0 0.3M UVC WebCam: Found keys
[ 80.064] (II) evdev: USB2.0 0.3M UVC WebCam: Configuring as keyboard
[ 80.064] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input15/event14"
[ 80.064] (II) XINPUT: Adding extended input device "USB2.0 0.3M UVC WebCam" (type: KEYBOARD, id 14)
[ 80.064] (**) Option "xkb_rules" "evdev"
[ 80.064] (**) Option "xkb_model" "pc104"
[ 80.064] (**) Option "xkb_layout" "br"
[ 80.064] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 80.064] (II) No input driver specified, ignoring this device.
[ 80.064] (II) This device may have been added with another device file.
[ 80.065] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 80.065] (II) No input driver specified, ignoring this device.
[ 80.065] (II) This device may have been added with another device file.
[ 80.065] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 80.065] (II) No input driver specified, ignoring this device.
[ 80.065] (II) This device may have been added with another device file.
[ 80.065] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 80.065] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 80.065] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 80.065] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 80.065] (**) Asus WMI hotkeys: always reports core events
[ 80.065] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event9"
[ 80.066] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 80.066] (--) evdev: Asus WMI hotkeys: Found keys
[ 80.066] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 80.066] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input11/event9"
[ 80.066] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 15)
[ 80.066] (**) Option "xkb_rules" "evdev"
[ 80.066] (**) Option "xkb_model" "pc104"
[ 80.066] (**) Option "xkb_layout" "br"
[ 80.066] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.066] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 80.066] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.066] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 80.066] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.067] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 80.067] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 80.067] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 80.067] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 80.067] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.067] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 80.067] (**) Option "xkb_rules" "evdev"
[ 80.067] (**) Option "xkb_model" "pc104"
[ 80.067] (**) Option "xkb_layout" "br"
[ 80.067] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event13)
[ 80.067] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 80.067] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 80.067] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 80.067] (II) LoadModule: "synaptics"
[ 80.068] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 80.083] (II) Module synaptics: vendor="X.Org Foundation"
[ 80.083] compiled for 1.15.1, module version = 1.8.0
[ 80.083] Module class: X.Org XInput Driver
[ 80.083] ABI class: X.Org XInput driver, version 20.0
[ 80.083] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 80.083] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 80.083] (**) Option "Device" "/dev/input/event13"
[ 80.243] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1793 (res 32)
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 80.243] (**) Option "TapButton1" "1"
[ 80.243] (**) Option "TapButton2" "2"
[ 80.243] (**) Option "TapButton3" "3"
[ 80.243] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 80.243] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 80.243] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 80.330] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event13"
[ 80.330] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 17)
[ 80.330] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 80.330] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 80.330] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.054
[ 80.330] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 80.330] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 80.330] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 80.330] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 80.330] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 80.331] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 80.331] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 80.331] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 80.331] (II) No input driver specified, ignoring this device.
[ 80.331] (II) This device may have been added with another device file.
[ 81.204] (II) intel(0): EDID vendor "LGD", prod id 760
[ 81.204] (II) intel(0): Printing DDC gathered Modelines:
[ 81.204] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 81.219] (II) intel(0): resizing framebuffer to 3286x1080
[ 81.224] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 81.240] (II) intel(0): switch to mode 1920x1080@60.0 on VGA2 using pipe 1, position (0, 0), rotation normal, reflection none
[ 81.247] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (1920, 312), rotation normal, reflection none
Offline
Could you post your /var/log/Xorg.8.log file? (The main Intel card runs on :0 and the the Nvidia card runs on :8)
Offline
Sure!
[ 27044.790]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 27044.790] X Protocol Version 11, Revision 0
[ 27044.790] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 27044.790] Current Operating System: Linux utopos 3.15.6-1-ARCH #1 SMP PREEMPT Fri Jul 18 07:06:42 CEST 2014 x86_64
[ 27044.790] Kernel command line: initrd=\initramfs-linux.img cryptdevice=PARTUUID=93c1a557-90ad-4d53-b7c7-d036a8910c7b:nevoeiro root=/dev/mapper/nevoeiro resume=/dev/mapper/nevoeiro resume_offset=81389568 add_efi_memmap
[ 27044.790] Build Date: 18 July 2014 07:12:40PM
[ 27044.790]
[ 27044.790] Current version of pixman: 0.32.6
[ 27044.790] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27044.790] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27044.790] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Jul 24 15:52:15 2014
[ 27044.812] (++) Using config file: "/etc/bumblebee/xorg.conf.nouveau"
[ 27044.812] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 27044.825] (==) ServerLayout "Layout0"
[ 27044.825] (==) No screen section available. Using defaults.
[ 27044.825] (**) |-->Screen "Default Screen Section" (0)
[ 27044.825] (**) | |-->Monitor "<default monitor>"
[ 27044.825] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 27044.825] (**) | |-->Device "DiscreteNvidia"
[ 27044.825] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27044.825] (**) Option "AutoAddDevices" "false"
[ 27044.825] (**) Option "AutoAddGPU" "false"
[ 27044.825] (**) Not automatically adding devices
[ 27044.825] (==) Automatically enabling devices
[ 27044.825] (**) Not automatically adding GPU devices
[ 27044.825] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 27044.825] Entry deleted from font path.
[ 27044.825] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 27044.825] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 27044.825] Entry deleted from font path.
[ 27044.825] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 27044.825] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 27044.825] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27044.825] (==) |-->Input Device "<default pointer>"
[ 27044.825] (==) |-->Input Device "<default keyboard>"
[ 27044.825] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 27044.825] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 27044.825] (II) Loader magic: 0x818d80
[ 27044.825] (II) Module ABI versions:
[ 27044.825] X.Org ANSI C Emulation: 0.4
[ 27044.825] X.Org Video Driver: 18.0
[ 27044.825] X.Org XInput driver : 21.0
[ 27044.825] X.Org Server Extension : 8.0
[ 27044.827] (EE) systemd-logind: failed to get session: PID 13761 does not belong to any known session
[ 27044.828] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 27044.828] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
[ 27044.828] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27044.828] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 27044.828] (--) PCI:*(0:1:0:0) 10de:0de9:1043:10ac rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 27044.828] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 27044.828] (II) LoadModule: "glx"
[ 27044.829] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27044.829] (II) Module glx: vendor="X.Org Foundation"
[ 27044.829] compiled for 1.16.0, module version = 1.0.0
[ 27044.829] ABI class: X.Org Server Extension, version 8.0
[ 27044.829] (==) AIGLX enabled
[ 27044.829] (II) LoadModule: "nouveau"
[ 27044.829] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 27044.830] (II) Module nouveau: vendor="X.Org Foundation"
[ 27044.830] compiled for 1.16.0, module version = 1.0.10
[ 27044.830] Module class: X.Org Video Driver
[ 27044.830] ABI class: X.Org Video Driver, version 18.0
[ 27044.830] (II) LoadModule: "mouse"
[ 27044.830] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 27044.854] (II) Module mouse: vendor="X.Org Foundation"
[ 27044.854] compiled for 1.16.0, module version = 1.9.0
[ 27044.854] Module class: X.Org XInput Driver
[ 27044.854] ABI class: X.Org XInput driver, version 21.0
[ 27044.854] (II) LoadModule: "kbd"
[ 27044.854] (WW) Warning, couldn't open module kbd
[ 27044.854] (II) UnloadModule: "kbd"
[ 27044.854] (II) Unloading kbd
[ 27044.854] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 27044.854] (II) NOUVEAU driver
[ 27044.854] (II) NOUVEAU driver for NVIDIA chipset families :
[ 27044.854] RIVA TNT (NV04)
[ 27044.854] RIVA TNT2 (NV05)
[ 27044.854] GeForce 256 (NV10)
[ 27044.854] GeForce 2 (NV11, NV15)
[ 27044.854] GeForce 4MX (NV17, NV18)
[ 27044.854] GeForce 3 (NV20)
[ 27044.854] GeForce 4Ti (NV25, NV28)
[ 27044.854] GeForce FX (NV3x)
[ 27044.854] GeForce 6 (NV4x)
[ 27044.855] GeForce 7 (G7x)
[ 27044.855] GeForce 8 (G8x)
[ 27044.855] GeForce GTX 200 (NVA0)
[ 27044.855] GeForce GTX 400 (NVC0)
[ 27044.855] (--) using VT number 1
[ 27044.855] (II) [drm] nouveau interface version: 1.1.1
[ 27044.855] (II) Loading sub module "dri2"
[ 27044.855] (II) LoadModule: "dri2"
[ 27044.855] (II) Module "dri2" already built-in
[ 27044.855] (EE) NOUVEAU(0): [drm] failed to set drm interface version.
[ 27044.855] (EE) NOUVEAU(0): [drm] error opening the drm
[ 27044.855] (EE) NOUVEAU(0): 836:
[ 27044.855] (II) UnloadModule: "nouveau"
[ 27044.855] (EE) Screen(s) found, but none have a usable configuration.
[ 27044.855] (EE)
Fatal server error:
[ 27044.855] (EE) no screens found(EE)
[ 27044.855] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 27044.855] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 27044.855] (EE)
[ 27044.856] (EE) Server terminated with error (1). Closing log file.
Offline
Sure!
[ 27044.790] X.Org X Server 1.16.0 Release Date: 2014-07-16 [ 27044.790] X Protocol Version 11, Revision 0 [ 27044.790] Build Operating System: Linux 3.15.1-1-ARCH x86_64 [ 27044.790] Current Operating System: Linux utopos 3.15.6-1-ARCH #1 SMP PREEMPT Fri Jul 18 07:06:42 CEST 2014 x86_64 [ 27044.790] Kernel command line: initrd=\initramfs-linux.img cryptdevice=PARTUUID=93c1a557-90ad-4d53-b7c7-d036a8910c7b:nevoeiro root=/dev/mapper/nevoeiro resume=/dev/mapper/nevoeiro resume_offset=81389568 add_efi_memmap [ 27044.790] Build Date: 18 July 2014 07:12:40PM [ 27044.790] [ 27044.790] Current version of pixman: 0.32.6 [ 27044.790] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 27044.790] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 27044.790] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Jul 24 15:52:15 2014 [ 27044.812] (++) Using config file: "/etc/bumblebee/xorg.conf.nouveau" [ 27044.812] (++) Using config directory: "/etc/bumblebee/xorg.conf.d" [ 27044.825] (==) ServerLayout "Layout0" [ 27044.825] (==) No screen section available. Using defaults. [ 27044.825] (**) |-->Screen "Default Screen Section" (0) [ 27044.825] (**) | |-->Monitor "<default monitor>" [ 27044.825] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 27044.825] (**) | |-->Device "DiscreteNvidia" [ 27044.825] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 27044.825] (**) Option "AutoAddDevices" "false" [ 27044.825] (**) Option "AutoAddGPU" "false" [ 27044.825] (**) Not automatically adding devices [ 27044.825] (==) Automatically enabling devices [ 27044.825] (**) Not automatically adding GPU devices [ 27044.825] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 27044.825] Entry deleted from font path. [ 27044.825] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 27044.825] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 27044.825] Entry deleted from font path. [ 27044.825] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 27044.825] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/ [ 27044.825] (==) ModulePath set to "/usr/lib/xorg/modules" [ 27044.825] (==) |-->Input Device "<default pointer>" [ 27044.825] (==) |-->Input Device "<default keyboard>" [ 27044.825] (==) The core pointer device wasn't specified explicitly in the layout. Using the default mouse configuration. [ 27044.825] (==) The core keyboard device wasn't specified explicitly in the layout. Using the default keyboard configuration. [ 27044.825] (II) Loader magic: 0x818d80 [ 27044.825] (II) Module ABI versions: [ 27044.825] X.Org ANSI C Emulation: 0.4 [ 27044.825] X.Org Video Driver: 18.0 [ 27044.825] X.Org XInput driver : 21.0 [ 27044.825] X.Org Server Extension : 8.0 [ 27044.827] (EE) systemd-logind: failed to get session: PID 13761 does not belong to any known session [ 27044.828] (II) xfree86: Adding drm device (/dev/dri/card1) [ 27044.828] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied [ 27044.828] (II) xfree86: Adding drm device (/dev/dri/card0) [ 27044.828] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied [ 27044.828] (--) PCI:*(0:1:0:0) 10de:0de9:1043:10ac rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 27044.828] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 27044.828] (II) LoadModule: "glx" [ 27044.829] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 27044.829] (II) Module glx: vendor="X.Org Foundation" [ 27044.829] compiled for 1.16.0, module version = 1.0.0 [ 27044.829] ABI class: X.Org Server Extension, version 8.0 [ 27044.829] (==) AIGLX enabled [ 27044.829] (II) LoadModule: "nouveau" [ 27044.829] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 27044.830] (II) Module nouveau: vendor="X.Org Foundation" [ 27044.830] compiled for 1.16.0, module version = 1.0.10 [ 27044.830] Module class: X.Org Video Driver [ 27044.830] ABI class: X.Org Video Driver, version 18.0 [ 27044.830] (II) LoadModule: "mouse" [ 27044.830] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so [ 27044.854] (II) Module mouse: vendor="X.Org Foundation" [ 27044.854] compiled for 1.16.0, module version = 1.9.0 [ 27044.854] Module class: X.Org XInput Driver [ 27044.854] ABI class: X.Org XInput driver, version 21.0 [ 27044.854] (II) LoadModule: "kbd" [ 27044.854] (WW) Warning, couldn't open module kbd [ 27044.854] (II) UnloadModule: "kbd" [ 27044.854] (II) Unloading kbd [ 27044.854] (EE) Failed to load module "kbd" (module does not exist, 0) [ 27044.854] (II) NOUVEAU driver [ 27044.854] (II) NOUVEAU driver for NVIDIA chipset families : [ 27044.854] RIVA TNT (NV04) [ 27044.854] RIVA TNT2 (NV05) [ 27044.854] GeForce 256 (NV10) [ 27044.854] GeForce 2 (NV11, NV15) [ 27044.854] GeForce 4MX (NV17, NV18) [ 27044.854] GeForce 3 (NV20) [ 27044.854] GeForce 4Ti (NV25, NV28) [ 27044.854] GeForce FX (NV3x) [ 27044.854] GeForce 6 (NV4x) [ 27044.855] GeForce 7 (G7x) [ 27044.855] GeForce 8 (G8x) [ 27044.855] GeForce GTX 200 (NVA0) [ 27044.855] GeForce GTX 400 (NVC0) [ 27044.855] (--) using VT number 1 [ 27044.855] (II) [drm] nouveau interface version: 1.1.1 [ 27044.855] (II) Loading sub module "dri2" [ 27044.855] (II) LoadModule: "dri2" [ 27044.855] (II) Module "dri2" already built-in [ 27044.855] (EE) NOUVEAU(0): [drm] failed to set drm interface version. [ 27044.855] (EE) NOUVEAU(0): [drm] error opening the drm [ 27044.855] (EE) NOUVEAU(0): 836: [ 27044.855] (II) UnloadModule: "nouveau" [ 27044.855] (EE) Screen(s) found, but none have a usable configuration. [ 27044.855] (EE) Fatal server error: [ 27044.855] (EE) no screens found(EE) [ 27044.855] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 27044.855] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information. [ 27044.855] (EE) [ 27044.856] (EE) Server terminated with error (1). Closing log file.
Thanks! That looks really similar to the error I recently got. Have you, by chance, edited the /etc/bumblebee/xorg.conf.{nvidia,nouveau} files for an external monitor? If you have, try the following configurations instead:
For the nvidia driver (xorg.conf.nvidia):
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
# Option "UseEDID" "false"
# Option "UseDisplayDevice" "none"
EndSection
For the nouveau driver (xorg.conf.nouveau):
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nouveau"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting is needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
EndSection
Offline
No, I didn't... My "nouveau" file is same as you posted.
But do use 2 monitors.
Edit: I restarted using only one monitor, but the problem persisted. =/
Edit2: Found a workaround here: https://bugzilla.redhat.com/show_bug.cgi?id=964012
In my experience, bumblebee hasn't worked with nouveau since PRIME was in the kernel, around kernel 3.5 or 3.6. I don't think there's any way around that. Kernel 3.12 has added in-kernel power management, replacing bbswitch (it's pretty rough still, but works) and instead of optirun you'd run 'DRI_PRIME=1 program' after running xrandr --setprovideroffloadsink nouveau Intel and a compositor (xcompmgr would do).
It works for me. I am just not sure if the power saving works too...
Last edited by flecha (2014-07-25 02:18:50)
Offline
No, I didn't... My "nouveau" file is same as you posted.
But do use 2 monitors.Edit: I restarted using only one monitor, but the problem persisted. =/
Edit2: Found a workaround here: https://bugzilla.redhat.com/show_bug.cgi?id=964012
tod.jackson wrote:In my experience, bumblebee hasn't worked with nouveau since PRIME was in the kernel, around kernel 3.5 or 3.6. I don't think there's any way around that. Kernel 3.12 has added in-kernel power management, replacing bbswitch (it's pretty rough still, but works) and instead of optirun you'd run 'DRI_PRIME=1 program' after running xrandr --setprovideroffloadsink nouveau Intel and a compositor (xcompmgr would do).
It works for me. I am just not sure if the power saving works too...
Hmm, maybe you could try the proprietary driver again? (Though it doesn't work as well as it used to...)
If I don't have any monitor connected, I have to uncomment in xorg.conf.nvidia:
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
If I connect a second monitor, I have to comment those out again. When I forget to do that, I get the same "Failed to get session: PID ..." error message.
Offline
Thanks for the help, chenxiaolong, but I would rather not install the proprietary driver... The configuration of these drivers is far from predictable, so I am afraid of not being able to fallback to nouveau after installing the proprietary one.
Anyway, doing a cat /proc/acpi/bbswitch I can see that this workaround is turning of the GPU after use.
So I just did a function to use it:
function use_gpu { xrandr --setprovideroffloadsink nouveau Intel; xcompmgr -c &; DRI_PRIME=1 $@; killall xcompmgr; }
Test with: use_gpu glxgears -info
I will consider this thread as "~solved".
Offline