Pulseaudio not recognizing input device as normal user

tgsb · 2014-07-29 17:15:44

Hello, I just have a question on pulseaudio.

I have been running Arch for a while and its been working fine, but I recently installed skype to communicate with someone and I noticed my microphone wasn't working. After some fiddling I got that to work outside of skype.

To fix the skype I looked around and checked the wiki which told me that I could downmix the input to mono and fix it.

I did the

 $ pacmd list-sources

that the wiki said and it gave me a source list that didn't show an input device

1 source(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: 
	priority: 1950
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 344 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 2000.00 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 0
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 6
	properties:
		device.description = "Monitor of Built-in Audio Analog Stereo"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7410000 irq 45"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
[tgsb@dankmemes ~]$

I tried this with root and it showed what I needed

3 source(s) available.
    index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1950
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 0
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 6
	properties:
		device.description = "Monitor of Built-in Audio Analog Stereo"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7410000 irq 45"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
  * index: 1
	name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9959
	volume: front-left: 63068 /  96% / -1.00 dB,   front-right: 63068 /  96% / -1.00 dB
	        balance 0.00
	base volume: 20724 /  32% / -30.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC892 Analog"
		alsa.id = "ALC892 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7410000 irq 45"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Intel PantherPoint HDMI"
		alsa.components = "HDA:10ec0892,146210d1,00100302 HDA:80862806,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
			properties:
				
	active port: <analog-input-internal-mic>
    index: 2
	name: <alsa_input.pci-0000_00_1b.0.analog-stereo.remapped>
	driver: <module-remap-source.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1000
	volume: mono: 65536 / 100% / 0.00 dB,   mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: mono,mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	module: 25
	properties:
		device.master_device = "alsa_input.pci-0000_00_1b.0.analog-stereo"
		device.class = "filter"
		device.description = "Remapped Built-in Audio Analog Stereo"
		device.icon_name = "audio-input-microphone"

I thought this was odd but shrugged it off and added the necessary

 ### Remap microphone to mono
load-module module-remap-source master=alsa_input.pci-0000_00_1b.0.analog-stereo master_channel_map=front-left,front-right channels=2 channel_map=mono,mono

like the wiki said to the default.pa

But when I restart it shows that the pulseaudio daemon wont, which I assume is because of the user showing different sources than the root.

 pulseaudio -v

gives me

I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 9421c9d43c0d49d785504c1b93c43826.
I: [pulseaudio] main.c: Session ID is c2.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/tgsb/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/tgsb/.config/pulse/9421c9d43c0d49d785504c1b93c43826-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/tgsb/.config/pulse/9421c9d43c0d49d785504c1b93c43826-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/tgsb/.config/pulse/9421c9d43c0d49d785504c1b93c43826-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA Intel PCH/HDA Intel PCH.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel PCH
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel PCH use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel PCH
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D7p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D8p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: No such file or directory
I: [pulseaudio] module-card-restore.c: Restored profile 'output:analog-stereo' for card alsa_card.pci-0000_00_1b.0.
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1b.0.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_00_1b.0"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_1b.0.analog-stereo: front-left: 22704 /  35%,   front-right: 22704 /  35%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "16"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = "ALC892 Analog"
I: [pulseaudio] sink.c:     alsa.id = "ALC892 Analog"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "0"
I: [pulseaudio] sink.c:     alsa.card = "0"
I: [pulseaudio] sink.c:     alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] sink.c:     alsa.long_card_name = "HDA Intel PCH at 0xf7410000 irq 45"
I: [pulseaudio] sink.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c:     device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] sink.c:     device.bus = "pci"
I: [pulseaudio] sink.c:     device.vendor.id = "8086"
I: [pulseaudio] sink.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] sink.c:     device.product.id = "1e20"
I: [pulseaudio] sink.c:     device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
I: [pulseaudio] sink.c:     device.form_factor = "internal"
I: [pulseaudio] sink.c:     device.string = "front:0"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "176400"
I: [pulseaudio] sink.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c:     device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c:     device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c:     device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] sink.c:     alsa.mixer_name = "Intel PantherPoint HDMI"
I: [pulseaudio] sink.c:     alsa.components = "HDA:10ec0892,146210d1,00100302 HDA:80862806,80860101,00100000"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_output.pci-0000_00_1b.0.analog-stereo.monitor: front-left: 65536 / 100%,   front-right: 65536 / 100%
I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_output.pci-0000_00_1b.0.analog-stereo.monitor.
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of Built-in Audio Analog Stereo"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "HDA Intel PCH"
I: [pulseaudio] source.c:     alsa.long_card_name = "HDA Intel PCH at 0xf7410000 irq 45"
I: [pulseaudio] source.c:     alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "8086"
I: [pulseaudio] source.c:     device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c:     device.product.id = "1e20"
I: [pulseaudio] source.c:     device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
I: [pulseaudio] source.c:     device.form_factor = "internal"
I: [pulseaudio] source.c:     device.string = "0"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -179.00 dB to 0.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-ALC892 Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-ALC892 Analog] alsa-sink.c: Starting playback.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1b.0/sound/card0 (alsa_card.pci-0000_00_1b.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #7; argument: "channels=2").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #13; argument: "").
I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_output.pci-0000_00_1b.0.analog-stereo.monitor'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session c2"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
E: [pulseaudio] module-remap-source.c: Master source not found.
E: [pulseaudio] module.c: Failed to load module "module-remap-source" (argument: "master=alsa_input.pci-0000_00_1b.0.analog-stereo master_channel_map=front-left,front-right channels=2 channel_map=mono,mono"): initialization failed.
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #24).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #24).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #23).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #23).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #22).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #22).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #21).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #21).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #20).
I: [pulseaudio] client.c: Freed 0 "Login Session c2"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #20).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #19).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #18).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #17).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #16).
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #15).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #14).
I: [pulseaudio] module.c: Unloading "module-gconf" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #13).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #12).
I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #11).
I: [pulseaudio] module.c: Unloading "module-bluez5-discover" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-bluez5-discover" (index: #10).
I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #9).
I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #8).
I: [pulseaudio] module.c: Unloading "module-jackdbus-detect" (index: #7).
I: [pulseaudio] module.c: Unloaded "module-jackdbus-detect" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_00_1b.0.analog-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_00_1b.0"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon terminated.

which shows that the master isn't found that I added to the default.pa couldn't be found.

My question is, how do I get a normal user to show pulseaudio that device?

Last edited by tgsb (2014-07-29 21:01:04)

ewaller · 2014-07-29 20:51:23

Moved, by request.

Arch Linux

#1 2014-07-29 17:15:44

Pulseaudio not recognizing input device as normal user

#2 2014-07-29 20:51:23

Re: Pulseaudio not recognizing input device as normal user

Board footer