You are not logged in.
My touchpad completely stopped working. I tried almost every single post on this forum, but none of them was able to solve my issue.
Apparently it's a Elantech
Actually, my touchpad is listed in /proc/bug/input/devices:
I: Bus=0011 Vendor=0002 Product=000e Version=0000
N: Name="ETPS/2 Elantech Touchpad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: PROP=5
B: EV=b
B: KEY=e420 10000 0 0 0 0
B: ABS=661800011000003
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
U: Uniq=
H: Handlers=event5
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
U: Uniq=
H: Handlers=event6
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input8
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input9
U: Uniq=
H: Handlers=sysrq kbd event9
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Asus WMI hotkeys"
P: Phys=asus-nb-wmi/input0
S: Sysfs=/devices/platform/asus-nb-wmi/input/input11
U: Uniq=
H: Handlers=kbd rfkill event11
B: PROP=0
B: EV=100013
B: KEY=80000 0 800000000000 0 0 a1606f00900000 8200027800501000 e000000000000 0
B: MSC=10
I: Bus=0003 Vendor=0d8d Product=0516 Version=0110
N: Name="HID-compliant Mouse HID-compliant Mouse"
P: Phys=usb-0000:00:14.0-3/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0D8D:0516.0001/input/input12
U: Uniq=
H: Handlers=mouse1 event12
B: PROP=0
B: EV=17
B: KEY=1f0000 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0003 Vendor=064e Product=d213 Version=0100
N: Name="USB 2.0 UVC HD Webcam"
P: Phys=usb-0000:00:1a.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
This is not enought to make it. Actually, Xorg.0.log shows absolutely no clue of it:
[ 21.472]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 21.472] X Protocol Version 11, Revision 0
[ 21.472] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 21.472] Current Operating System: Linux georges 3.13.7-1-ARCH #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014 x86_64
[ 21.472] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e62dff5a-8b67-491f-967f-7554fd2a02be rw
[ 21.472] Build Date: 09 January 2014 08:47:24AM
[ 21.472]
[ 21.472] Current version of pixman: 0.32.4
[ 21.472] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.472] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.473] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 1 09:12:40 2014
[ 21.675] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 21.675] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.792] (==) No Layout section. Using the first Screen section.
[ 21.792] (==) No screen section available. Using defaults.
[ 21.792] (**) |-->Screen "Default Screen Section" (0)
[ 21.792] (**) | |-->Monitor "<default monitor>"
[ 21.808] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 21.808] (==) Automatically adding devices
[ 21.808] (==) Automatically enabling devices
[ 21.808] (==) Automatically adding GPU devices
[ 22.010] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 22.010] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.010] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.010] (II) Loader magic: 0x804c80
[ 22.010] (II) Module ABI versions:
[ 22.010] X.Org ANSI C Emulation: 0.4
[ 22.010] X.Org Video Driver: 15.0
[ 22.010] X.Org XInput driver : 20.0
[ 22.010] X.Org Server Extension : 8.0
[ 22.010] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 22.011] (--) PCI:*(0:0:2:0) 8086:0166:1043:10ac rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 22.012] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.025] Initializing built-in extension Generic Event Extension
[ 22.025] Initializing built-in extension SHAPE
[ 22.025] Initializing built-in extension MIT-SHM
[ 22.025] Initializing built-in extension XInputExtension
[ 22.025] Initializing built-in extension XTEST
[ 22.025] Initializing built-in extension BIG-REQUESTS
[ 22.025] Initializing built-in extension SYNC
[ 22.025] Initializing built-in extension XKEYBOARD
[ 22.025] Initializing built-in extension XC-MISC
[ 22.025] Initializing built-in extension SECURITY
[ 22.025] Initializing built-in extension XINERAMA
[ 22.025] Initializing built-in extension XFIXES
[ 22.025] Initializing built-in extension RENDER
[ 22.025] Initializing built-in extension RANDR
[ 22.025] Initializing built-in extension COMPOSITE
[ 22.025] Initializing built-in extension DAMAGE
[ 22.025] Initializing built-in extension MIT-SCREEN-SAVER
[ 22.025] Initializing built-in extension DOUBLE-BUFFER
[ 22.025] Initializing built-in extension RECORD
[ 22.025] Initializing built-in extension DPMS
[ 22.025] Initializing built-in extension Present
[ 22.025] Initializing built-in extension DRI3
[ 22.025] Initializing built-in extension X-Resource
[ 22.025] Initializing built-in extension XVideo
[ 22.025] Initializing built-in extension XVideo-MotionCompensation
[ 22.025] Initializing built-in extension XFree86-VidModeExtension
[ 22.025] Initializing built-in extension XFree86-DGA
[ 22.025] Initializing built-in extension XFree86-DRI
[ 22.025] Initializing built-in extension DRI2
[ 22.026] (II) "glx" will be loaded by default.
[ 22.026] (II) LoadModule: "dri2"
[ 22.026] (II) Module "dri2" already built-in
[ 22.026] (II) LoadModule: "glamoregl"
[ 22.103] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 23.022] (II) Module glamoregl: vendor="X.Org Foundation"
[ 23.022] compiled for 1.15.0, module version = 0.6.0
[ 23.022] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.022] (II) LoadModule: "glx"
[ 23.097] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.108] (II) Module glx: vendor="X.Org Foundation"
[ 23.108] compiled for 1.15.0, module version = 1.0.0
[ 23.109] ABI class: X.Org Server Extension, version 8.0
[ 23.109] (==) AIGLX enabled
[ 23.109] Loading extension GLX
[ 23.109] (==) Matched intel as autoconfigured driver 0
[ 23.109] (==) Matched intel as autoconfigured driver 1
[ 23.109] (==) Matched modesetting as autoconfigured driver 2
[ 23.109] (==) Matched fbdev as autoconfigured driver 3
[ 23.109] (==) Matched vesa as autoconfigured driver 4
[ 23.109] (==) Assigned the driver to the xf86ConfigLayout
[ 23.109] (II) LoadModule: "intel"
[ 23.109] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.353] (II) Module intel: vendor="X.Org Foundation"
[ 23.354] compiled for 1.15.0, module version = 2.99.911
[ 23.354] Module class: X.Org Video Driver
[ 23.354] ABI class: X.Org Video Driver, version 15.0
[ 23.354] (II) LoadModule: "modesetting"
[ 23.354] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 23.377] (II) Module modesetting: vendor="X.Org Foundation"
[ 23.377] compiled for 1.15.0, module version = 0.8.1
[ 23.377] Module class: X.Org Video Driver
[ 23.377] ABI class: X.Org Video Driver, version 15.0
[ 23.377] (II) LoadModule: "fbdev"
[ 23.377] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.410] (II) Module fbdev: vendor="X.Org Foundation"
[ 23.410] compiled for 1.15.0, module version = 0.4.4
[ 23.410] Module class: X.Org Video Driver
[ 23.410] ABI class: X.Org Video Driver, version 15.0
[ 23.410] (II) LoadModule: "vesa"
[ 23.410] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.428] (II) Module vesa: vendor="X.Org Foundation"
[ 23.428] compiled for 1.15.0, module version = 2.3.2
[ 23.428] Module class: X.Org Video Driver
[ 23.428] ABI class: X.Org Video Driver, version 15.0
[ 23.428] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 23.443] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 23.443] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 23.443] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 23.443] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 23.443] (II) FBDEV: driver for framebuffer: fbdev
[ 23.443] (II) VESA: driver for VESA chipsets: vesa
[ 23.443] (++) using VT number 1
[ 23.455] (WW) Falling back to old probe method for modesetting
[ 23.455] (WW) Falling back to old probe method for fbdev
[ 23.455] (II) Loading sub module "fbdevhw"
[ 23.455] (II) LoadModule: "fbdevhw"
[ 23.455] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 23.477] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 23.477] compiled for 1.15.0, module version = 0.0.2
[ 23.477] ABI class: X.Org Video Driver, version 15.0
[ 23.477] (WW) Falling back to old probe method for vesa
[ 23.478] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 23.478] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 23.478] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.478] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.478] (==) intel(0): RGB weight 888
[ 23.478] (==) intel(0): Default visual is TrueColor
[ 23.478] (**) intel(0): Framebuffer tiled
[ 23.478] (**) intel(0): Pixmaps tiled
[ 23.478] (**) intel(0): "Tear free" disabled
[ 23.478] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 23.479] (II) intel(0): Output LVDS1 has no monitor section
[ 23.479] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 23.479] (II) intel(0): Output VGA1 has no monitor section
[ 23.479] (II) intel(0): Output HDMI1 has no monitor section
[ 23.479] (II) intel(0): Output DP1 has no monitor section
[ 23.479] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 23.479] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 23.479] (==) intel(0): DPI set to (96, 96)
[ 23.479] (II) Loading sub module "dri2"
[ 23.479] (II) LoadModule: "dri2"
[ 23.479] (II) Module "dri2" already built-in
[ 23.479] (II) UnloadModule: "modesetting"
[ 23.479] (II) Unloading modesetting
[ 23.479] (II) UnloadModule: "fbdev"
[ 23.479] (II) Unloading fbdev
[ 23.479] (II) UnloadSubModule: "fbdevhw"
[ 23.479] (II) Unloading fbdevhw
[ 23.479] (II) UnloadModule: "vesa"
[ 23.479] (II) Unloading vesa
[ 23.479] (==) Depth 24 pixmap format is 32 bpp
[ 23.560] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 23.560] (==) intel(0): Backing store enabled
[ 23.560] (==) intel(0): Silken mouse enabled
[ 23.561] (II) intel(0): HW Cursor enabled
[ 23.561] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.563] (==) intel(0): DPMS enabled
[ 23.564] (II) intel(0): [DRI2] Setup complete
[ 23.564] (II) intel(0): [DRI2] DRI driver: i965
[ 23.564] (II) intel(0): [DRI2] VDPAU driver: i965
[ 23.564] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.564] (==) intel(0): hotplug detection: "enabled"
[ 23.564] (--) RandR disabled
[ 24.153] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 24.153] (II) AIGLX: enabled GLX_ARB_create_context
[ 24.153] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 24.153] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 24.153] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 24.153] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 24.153] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 24.153] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 24.153] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 24.153] (II) AIGLX: Loaded and initialized i965
[ 24.153] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 24.172] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 24.180] (II) intel(0): Setting screen physical size to 361 x 203
[ 24.846] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 24.846] (**) Power Button: Applying InputClass "system-keyboard"
[ 24.846] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.846] (II) LoadModule: "evdev"
[ 24.846] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.878] (II) Module evdev: vendor="X.Org Foundation"
[ 24.878] compiled for 1.15.0, module version = 2.8.2
[ 24.878] Module class: X.Org XInput Driver
[ 24.878] ABI class: X.Org XInput driver, version 20.0
[ 24.878] (II) Using input driver 'evdev' for 'Power Button'
[ 24.878] (**) Power Button: always reports core events
[ 24.878] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 24.878] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.878] (--) evdev: Power Button: Found keys
[ 24.878] (II) evdev: Power Button: Configuring as keyboard
[ 24.878] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 24.878] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.878] (**) Option "xkb_rules" "evdev"
[ 24.879] (**) Option "xkb_model" "pc104"
[ 24.879] (**) Option "xkb_layout" "br"
[ 24.916] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 24.916] (**) Video Bus: Applying InputClass "system-keyboard"
[ 24.916] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.916] (II) Using input driver 'evdev' for 'Video Bus'
[ 24.916] (**) Video Bus: always reports core events
[ 24.916] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 24.916] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 24.916] (--) evdev: Video Bus: Found keys
[ 24.916] (II) evdev: Video Bus: Configuring as keyboard
[ 24.916] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
[ 24.916] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 24.916] (**) Option "xkb_rules" "evdev"
[ 24.916] (**) Option "xkb_model" "pc104"
[ 24.916] (**) Option "xkb_layout" "br"
[ 24.917] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24.917] (**) Power Button: Applying InputClass "system-keyboard"
[ 24.917] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.917] (II) Using input driver 'evdev' for 'Power Button'
[ 24.917] (**) Power Button: always reports core events
[ 24.917] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 24.917] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.917] (--) evdev: Power Button: Found keys
[ 24.917] (II) evdev: Power Button: Configuring as keyboard
[ 24.917] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 24.917] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 24.917] (**) Option "xkb_rules" "evdev"
[ 24.917] (**) Option "xkb_model" "pc104"
[ 24.917] (**) Option "xkb_layout" "br"
[ 24.917] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 24.917] (II) No input driver specified, ignoring this device.
[ 24.917] (II) This device may have been added with another device file.
[ 24.918] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 24.918] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 24.918] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 24.918] (II) Using input driver 'evdev' for 'Sleep Button'
[ 24.918] (**) Sleep Button: always reports core events
[ 24.918] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 24.918] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 24.918] (--) evdev: Sleep Button: Found keys
[ 24.918] (II) evdev: Sleep Button: Configuring as keyboard
[ 24.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 24.918] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 24.918] (**) Option "xkb_rules" "evdev"
[ 24.918] (**) Option "xkb_model" "pc104"
[ 24.918] (**) Option "xkb_layout" "br"
[ 24.918] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 24.918] (II) config/udev: Adding input device USB 2.0 UVC HD Webcam (/dev/input/event10)
[ 24.918] (**) USB 2.0 UVC HD Webcam: Applying InputClass "system-keyboard"
[ 24.919] (**) USB 2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[ 24.919] (II) Using input driver 'evdev' for 'USB 2.0 UVC HD Webcam'
[ 24.919] (**) USB 2.0 UVC HD Webcam: always reports core events
[ 24.919] (**) evdev: USB 2.0 UVC HD Webcam: Device: "/dev/input/event10"
[ 24.919] (--) evdev: USB 2.0 UVC HD Webcam: Vendor 0x64e Product 0xd213
[ 24.919] (--) evdev: USB 2.0 UVC HD Webcam: Found keys
[ 24.919] (II) evdev: USB 2.0 UVC HD Webcam: Configuring as keyboard
[ 24.919] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input12/event10"
[ 24.919] (II) XINPUT: Adding extended input device "USB 2.0 UVC HD Webcam" (type: KEYBOARD, id 10)
[ 24.919] (**) Option "xkb_rules" "evdev"
[ 24.919] (**) Option "xkb_model" "pc104"
[ 24.919] (**) Option "xkb_layout" "br"
[ 24.919] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 24.919] (II) No input driver specified, ignoring this device.
[ 24.919] (II) This device may have been added with another device file.
[ 24.919] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 24.919] (II) No input driver specified, ignoring this device.
[ 24.919] (II) This device may have been added with another device file.
[ 24.920] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 24.920] (II) No input driver specified, ignoring this device.
[ 24.920] (II) This device may have been added with another device file.
[ 24.920] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event5)
[ 24.920] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 24.920] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 24.920] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 24.920] (**) Asus WMI hotkeys: always reports core events
[ 24.920] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event5"
[ 24.920] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 24.920] (--) evdev: Asus WMI hotkeys: Found keys
[ 24.920] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 24.920] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input5/event5"
[ 24.920] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[ 24.920] (**) Option "xkb_rules" "evdev"
[ 24.920] (**) Option "xkb_model" "pc104"
[ 24.920] (**) Option "xkb_layout" "br"
[ 24.920] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 24.920] (II) No input driver specified, ignoring this device.
[ 24.920] (II) This device may have been added with another device file.
[ 34.293] (II) intel(0): EDID vendor "CMN", prod id 5232
[ 34.293] (II) intel(0): Printing DDC gathered Modelines:
[ 34.293] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1480 768 770 776 780 -hsync -vsync (46.8 kHz eP)
[ 47.387] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event11)
[ 47.387] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 47.387] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 47.387] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 47.387] (**) AT Translated Set 2 keyboard: always reports core events
[ 47.387] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event11"
[ 47.387] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 47.387] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 47.387] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 47.387] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input13/event11"
[ 47.387] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 47.387] (**) Option "xkb_rules" "evdev"
[ 47.387] (**) Option "xkb_model" "pc104"
[ 47.387] (**) Option "xkb_layout" "br"
[ 1159.156] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1160.516] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1160.516] (II) UnloadModule: "evdev"
[ 1160.516] (II) evdev: Asus WMI hotkeys: Close
[ 1160.516] (II) UnloadModule: "evdev"
[ 1160.516] (II) evdev: USB 2.0 UVC HD Webcam: Close
[ 1160.516] (II) UnloadModule: "evdev"
[ 1160.516] (II) evdev: Sleep Button: Close
[ 1160.516] (II) UnloadModule: "evdev"
[ 1160.516] (II) evdev: Power Button: Close
[ 1160.516] (II) UnloadModule: "evdev"
[ 1160.516] (II) evdev: Video Bus: Close
[ 1160.516] (II) UnloadModule: "evdev"
[ 1160.516] (II) evdev: Power Button: Close
[ 1160.516] (II) UnloadModule: "evdev"
When I see dmesg log (dmesg | grep i8042, I find always the following:
[ 0.661351] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.673906] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.673919] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.900753] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input0
[ 11.257184] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input9
which is similar to this thread, specifically the 'good boot' section.
It gets attached correctly (I guess) is sysfs:
ls /sys/devices/platform/i8042/serio*
(KEYBOARD) /sys/devices/platform/i8042/serio0:
bind_mode description driver drvctl err_count extra firmware_id force_release id input modalias power scroll set softraw softrepeat subsystem uevent
(TOUCHPAD) /sys/devices/platform/i8042/serio1:
bind_mode description drvctl id modalias power rate reg_10 reg_20 reg_22 reg_24 reg_26 resolution subsystem
debug driver firmware_id input paritycheck protocol reg_07 reg_11 reg_21 reg_23 reg_25 resetafter resync_time uevent
I also tried i8042.nomux=1 and i8042.reset parameters, but no results.
The package elantech-psmouse is also installed.
Somenone has any ideia of how to fix it? What is happening here?
Thanks in advance
Offline
Actually, I was able to solve *some* issues. Still not working though.
I removed every conf file from /etc/X11/xorg.conf.d (except 00-keyboard.conf). It is now listed as a device from xinput --list.
Offline
I also had touchpad issues this past week after an upgrade. Only had left click responded but no cursor movement or right click.
I checked /var/log/Xorg.0.log and saw that the device was detected but no drivers. Have you tried:
# pacman -S xf86-input-synaptics
That took care of my issue...
Offline