Xorg Xv extension not working after recent upgrade

sweisman · 2014-08-30 19:08:15

I upgraded recently for the first time since July.

Besides the normal Xorg behavior change I was aware of, I have another behavior change that is much more frustrating, and I haven't been able to find any other reference to it in the forums, hence this post.

Xv has stopped working. I have xf86-video-intel.

According to the log below, DRI2 "Failed". Nothing specific about Xv, except "Disabling Xv because no adaptors could be initialized".

I have tried various things. Changing the accel method from UXA, which I have had for a long time due to issues with SAA, to SAA. And so forth.

Any help would be greatly appreciated.

Here is the current /etc/X11/xorg.conf.d/20-intel.conf:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "uxa"
EndSection

Here are some bits from the latest startx:
[ 37.566] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 37.598] (II) LoadModule: "intel"
[ 37.598] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 37.605] (II) Module intel: vendor="X.Org Foundation"
[ 37.605] compiled for 1.16.0, module version = 2.99.914
[ 37.605] Module class: X.Org Video Driver
[ 37.605] ABI class: X.Org Video Driver, version 18.0
[ 37.605] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 37.606] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 37.606] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 37.606] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 37.606] (++) using VT number 1
[ 37.606] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 37.606] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 37.608] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 37.608] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 37.608] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 37.608] (==) intel(0): RGB weight 888
[ 37.608] (==) intel(0): Default visual is TrueColor
[ 37.608] (**) intel(0): Option "AccelMethod" "uxa"
[ 37.608] (--) intel(0): Integrated Graphics Chipset: Intel(R) G41
[ 37.608] (**) intel(0): Relaxed fencing enabled
[ 37.608] (**) intel(0): Wait on SwapBuffers? enabled
[ 37.608] (**) intel(0): Triple buffering? enabled
[ 37.608] (**) intel(0): Framebuffer tiled
[ 37.608] (**) intel(0): Pixmaps tiled
[ 37.608] (**) intel(0): 3D buffers tiled
[ 37.608] (**) intel(0): SwapBuffers wait enabled
[ 37.608] (==) intel(0): video overlay key set to 0x101fe
[ 37.710] (II) intel(0): Output VGA1 has no monitor section
[ 37.813] (II) intel(0): EDID for output VGA1
[ 37.813] (II) intel(0): Manufacturer: DEL Model: 4032 Serial#: 1128612163
[ 37.813] (II) intel(0): Year: 2008 Week: 16
[ 37.813] (II) intel(0): EDID Version: 1.3
[ 37.813] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 37.813] (II) intel(0): Sync: Separate
[ 37.813] (II) intel(0): Max Image Size [cm]: horiz.: 43 vert.: 27
[ 37.813] (II) intel(0): Gamma: 2.20
[ 37.813] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 37.813] (II) intel(0): Default color space is primary color space
[ 37.813] (II) intel(0): First detailed timing is preferred mode
[ 37.813] (II) intel(0): redX: 0.651 redY: 0.333 greenX: 0.277 greenY: 0.614
[ 37.813] (II) intel(0): blueX: 0.145 blueY: 0.082 whiteX: 0.313 whiteY: 0.329
[ 37.813] (II) intel(0): Supported established timings:
[ 37.813] (II) intel(0): 720x400@70Hz
[ 37.813] (II) intel(0): 640x480@60Hz
[ 37.813] (II) intel(0): 640x480@75Hz
[ 37.813] (II) intel(0): 800x600@60Hz
[ 37.813] (II) intel(0): 800x600@75Hz
[ 37.813] (II) intel(0): 1024x768@60Hz
[ 37.813] (II) intel(0): 1024x768@75Hz
[ 37.813] (II) intel(0): 1280x1024@75Hz
[ 37.813] (II) intel(0): Manufacturer's mask: 0
[ 37.813] (II) intel(0): Supported standard timings:
[ 37.813] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 37.813] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 37.813] (II) intel(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 37.813] (II) intel(0): Supported detailed timing:
[ 37.813] (II) intel(0): clock: 146.2 MHz Image Size: 433 x 270 mm
[ 37.813] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 37.813] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 37.813] (II) intel(0): Serial No: WK52284ECEAC
[ 37.813] (II) intel(0): Monitor name: DellSP2008WFP
[ 37.813] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 37.814] (II) intel(0): EDID (in hex):
[ 37.814] (II) intel(0): 00ffffffffffff0010ac324043414543
[ 37.814] (II) intel(0): 10120103682b1b78eed105a655479d25
[ 37.814] (II) intel(0): 155054a54b00714f8180b30001010101
[ 37.814] (II) intel(0): 01010101010121399030621a274068b0
[ 37.814] (II) intel(0): 3600b10e1100001c000000ff00574b35
[ 37.814] (II) intel(0): 3232383445434541430a000000fc0044
[ 37.814] (II) intel(0): 656c6c535032303038574650000000fd
[ 37.814] (II) intel(0): 00384c1e5310000a20202020202000b6
[ 37.814] (II) intel(0): Printing probed modes for output VGA1
[ 37.814] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 37.814] (II) intel(0): Output VGA1 connected
[ 37.814] (II) intel(0): Using exact sizes for initial modes
[ 37.814] (II) intel(0): Output VGA1 using initial mode 1680x1050
[ 37.814] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 37.814] (II) intel(0): Kernel page flipping support detected, enabling
[ 37.814] (==) intel(0): DPI set to (96, 96)
[ 37.814] (II) Loading sub module "fb"
[ 37.814] (II) LoadModule: "fb"
[ 37.816] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 37.819] (II) Module fb: vendor="X.Org Foundation"
[ 37.819] compiled for 1.16.0, module version = 1.0.0
[ 37.819] ABI class: X.Org ANSI C Emulation, version 0.4
[ 37.819] (II) Loading sub module "dri2"
[ 37.819] (II) LoadModule: "dri2"
[ 37.819] (II) Module "dri2" already built-in
[ 37.819] (==) Depth 24 pixmap format is 32 bpp
[ 37.819] (II) intel(0): Allocated new frame buffer 1680x1050 stride 6912, untiled
[ 37.837] (II) UXA(0): Driver registered support for the following operations:
[ 37.837] (II) solid
[ 37.837] (II) copy
[ 37.837] (II) composite (RENDER acceleration)
[ 37.837] (II) put_image
[ 37.837] (II) get_image
[ 37.837] (WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks
[ 37.837] (==) intel(0): Backing store enabled
[ 37.837] (==) intel(0): Silken mouse enabled
[ 37.838] (II) intel(0): Initializing HW Cursor
[ 37.838] (II) intel(0): Use legacy UXA acceleration.
[ 37.838] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 37.839] (==) intel(0): DPMS enabled
[ 37.839] (==) intel(0): Intel XvMC decoder enabled
[ 37.839] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
[ 37.839] (II) intel(0): DRI2: Failed
[ 37.839] (II) intel(0): DRI3: Not available
[ 37.839] (==) intel(0): hotplug detection: "enabled"

ewaller · 2014-08-30 19:10:58

Moderator comment: Please use BBCode code tags when posting output. There is also a link under every post box on the forums. Thanks

karol · 2014-08-30 21:02:50

The other acceleration method is called sna, not saa.

sweisman · 2014-08-31 05:56:09

@ewaller, My apologies and I will be mindful for future posts.

@karol, Just a typo, as I used the correct value in my testing. SNA has the same problem.

ewaller · 2014-08-31 06:09:18

sweisman wrote:

@ewaller, My apologies and I will be mindful for future posts.

No apologies necessary. Of course, you might consider editing that first one in this thread.

Arch Linux

#1 2014-08-30 19:08:15

Xorg Xv extension not working after recent upgrade

#2 2014-08-30 19:10:58

Re: Xorg Xv extension not working after recent upgrade

#3 2014-08-30 21:02:50

Re: Xorg Xv extension not working after recent upgrade

#4 2014-08-31 05:56:09

Re: Xorg Xv extension not working after recent upgrade

#5 2014-08-31 06:09:18

Re: Xorg Xv extension not working after recent upgrade

Board footer