You are not logged in.

Pages: 1

#1 2014-09-06 18:12:12

x-yuri
Member
Registered: 2013-01-06
Posts: 161

[SOLVED] Can't make X Server start

Hi,

I'm trying to make X Server work, apparently. The last time I tried, I installed xorg-server, xorg-xinit and xf86-video-vesa. They say the default graphics driver should suffice. That is, I decided to start with one simple configuration. I take it, X Server can start without GNOME or whatever. So, I ran xstart and here's what X Server said:

[   384.751] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[   384.753] X Protocol Version 11, Revision 0
[   384.753] Build Operating System: Linux 3.15.5-2-ARCH x86_64 
[   384.754] Current Operating System: Linux yuri 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[   384.754] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=UUID=0af04039-1ff7-4c6e-b1ad-9ba5569bd682 rw initrd=../initramfs-linux.img
[   384.755] Build Date: 31 July 2014  11:53:19AM
[   384.756]  
[   384.757] Current version of pixman: 0.32.6
[   384.758] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   384.758] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   384.760] (==) Log file: "/home/yuri/.local/share/xorg/Xorg.0.log", Time: Sat Sep  6 23:33:04 2014
[   384.761] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   384.761] (==) No Layout section.  Using the first Screen section.
[   384.761] (==) No screen section available. Using defaults.
[   384.761] (**) |-->Screen "Default Screen Section" (0)
[   384.761] (**) |   |-->Monitor "<default monitor>"
[   384.761] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   384.761] (==) Automatically adding devices
[   384.761] (==) Automatically enabling devices
[   384.761] (==) Automatically adding GPU devices
[   384.761] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   384.761] 	Entry deleted from font path.
[   384.761] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   384.761] 	Entry deleted from font path.
[   384.761] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   384.761] 	Entry deleted from font path.
[   384.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   384.761] 	Entry deleted from font path.
[   384.761] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   384.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   384.761] 	Entry deleted from font path.
[   384.761] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   384.761] (==) FontPath set to:
	/usr/share/fonts/misc/
[   384.761] (==) ModulePath set to "/usr/lib/xorg/modules"
[   384.761] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   384.761] (II) Loader magic: 0x818d80
[   384.761] (II) Module ABI versions:
[   384.761] 	X.Org ANSI C Emulation: 0.4
[   384.761] 	X.Org Video Driver: 18.0
[   384.761] 	X.Org XInput driver : 21.0
[   384.761] 	X.Org Server Extension : 8.0
[   384.763] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[   384.763] (II) xfree86: Adding drm device (/dev/dri/card0)
[   384.763] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[   384.764] (--) PCI:*(0:1:0:0) 10de:0a65:1043:83f4 rev 162, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   384.764] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   384.764] (II) LoadModule: "glx"
[   384.764] (WW) Warning, couldn't open module glx
[   384.764] (II) UnloadModule: "glx"
[   384.764] (II) Unloading glx
[   384.764] (EE) Failed to load module "glx" (module does not exist, 0)
[   384.764] (==) Matched nouveau as autoconfigured driver 0
[   384.764] (==) Matched nvidia as autoconfigured driver 1
[   384.764] (==) Matched nv as autoconfigured driver 2
[   384.764] (==) Matched nouveau as autoconfigured driver 3
[   384.764] (==) Matched nvidia as autoconfigured driver 4
[   384.764] (==) Matched nv as autoconfigured driver 5
[   384.764] (==) Matched modesetting as autoconfigured driver 6
[   384.764] (==) Matched fbdev as autoconfigured driver 7
[   384.764] (==) Matched vesa as autoconfigured driver 8
[   384.764] (==) Assigned the driver to the xf86ConfigLayout
[   384.764] (II) LoadModule: "nouveau"
[   384.765] (WW) Warning, couldn't open module nouveau
[   384.765] (II) UnloadModule: "nouveau"
[   384.765] (II) Unloading nouveau
[   384.765] (EE) Failed to load module "nouveau" (module does not exist, 0)
[   384.765] (II) LoadModule: "nvidia"
[   384.765] (WW) Warning, couldn't open module nvidia
[   384.765] (II) UnloadModule: "nvidia"
[   384.765] (II) Unloading nvidia
[   384.765] (EE) Failed to load module "nvidia" (module does not exist, 0)
[   384.765] (II) LoadModule: "nv"
[   384.765] (WW) Warning, couldn't open module nv
[   384.765] (II) UnloadModule: "nv"
[   384.765] (II) Unloading nv
[   384.765] (EE) Failed to load module "nv" (module does not exist, 0)
[   384.765] (II) LoadModule: "modesetting"
[   384.765] (WW) Warning, couldn't open module modesetting
[   384.765] (II) UnloadModule: "modesetting"
[   384.765] (II) Unloading modesetting
[   384.765] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   384.765] (II) LoadModule: "fbdev"
[   384.765] (WW) Warning, couldn't open module fbdev
[   384.765] (II) UnloadModule: "fbdev"
[   384.765] (II) Unloading fbdev
[   384.765] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   384.765] (II) LoadModule: "vesa"
[   384.765] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   384.765] (II) Module vesa: vendor="X.Org Foundation"
[   384.765] 	compiled for 1.16.0, module version = 2.3.2
[   384.765] 	Module class: X.Org Video Driver
[   384.765] 	ABI class: X.Org Video Driver, version 18.0
[   384.765] (II) VESA: driver for VESA chipsets: vesa
[   384.765] (++) using VT number 1

[   384.765] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   384.765] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   384.765] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   384.765] (II) Loading sub module "vbe"
[   384.765] (II) LoadModule: "vbe"
[   384.766] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   384.766] (II) Module vbe: vendor="X.Org Foundation"
[   384.766] 	compiled for 1.16.0, module version = 1.1.0
[   384.766] 	ABI class: X.Org Video Driver, version 18.0
[   384.766] (II) Loading sub module "int10"
[   384.766] (II) LoadModule: "int10"
[   384.766] (II) Loading /usr/lib/xorg/modules/libint10.so
[   384.766] (II) Module int10: vendor="X.Org Foundation"
[   384.766] 	compiled for 1.16.0, module version = 1.0.0
[   384.766] 	ABI class: X.Org Video Driver, version 18.0
[   384.766] (II) VESA(0): initializing int10
[   384.766] (WW) xf86ReadBIOS: Failed to open /dev/mem (Permission denied)
[   384.766] (EE) VESA(0): Cannot read int vect
[   384.766] (II) UnloadModule: "vesa"
[   384.766] (II) UnloadSubModule: "int10"
[   384.766] (II) Unloading int10
[   384.766] (II) UnloadSubModule: "vbe"
[   384.766] (II) Unloading vbe
[   384.766] (EE) Screen(s) found, but none have a usable configuration.
[   384.766] (EE) 
Fatal server error:
[   384.766] (EE) no screens found(EE) 
[   384.766] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   384.766] (EE) Please also check the log file at "/home/yuri/.local/share/xorg/Xorg.0.log" for additional information.
[   384.766] (EE) 
[   384.771] (EE) Server terminated with error (1). Closing log file.

So, it wants some glx module, but I don't really know where it comes from.

My videocard:

$ lspci -k | grep -A 2 VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device 83f4
	Kernel driver in use: nouveau

Thanks in advance.

Last edited by x-yuri (2014-09-06 23:34:00)

Offline

#2 2014-09-06 18:33:04

CarlD
Member
From: London
Registered: 2013-11-23
Posts: 128

Re: [SOLVED] Can't make X Server start

I've had this problem myself with the vesa driver, albeit using the integrated Intel chipset. Even when adding the xorg=vesa or xforcevesa commands to the syslinux bootloader I get the same error as you. Weird thing is that the vesa driver obviously loads as indicated by the change in resolution when the system boots.

My own suspicion is that a xorg configuration file may be required that specifically states vesa should be used, but I am not certain. Sorry I couldn't be much more help, and am hoping someone more competent / experienced may be able to shed some light on this!

Offline

#3 2014-09-06 18:53:38

Gusar
Member
Registered: 2009-08-25
Posts: 3,607

Re: [SOLVED] Can't make X Server start

Why vesa and not nouveau or the nvidia blob? Yeah in theory vesa should work, but in my experience it tends to not work with KMS drivers. So either install xf86-video-nouveau or nvidia-utils.

Edit: Though looking at the exact error:

[   384.766] (WW) xf86ReadBIOS: Failed to open /dev/mem (Permission denied)

/dev/mem looks like this:

crw-r-----    1 root     kmem        1,   1 Sep  6 20:16 /dev/mem

So if vesa requires access to it, it'll only work when X is run as root, which isn't the case anymore (see the recent news announcement on the main page).

Last edited by Gusar (2014-09-06 18:56:51)

Offline

#4 2014-09-06 19:49:33

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,447
Website

Re: [SOLVED] Can't make X Server start

I also would recommend nouveau or nvidia (personally I'd favor the former) but if for some reason you can't or wont use these, I'd say don't bother with vesa, and use xf86-video-fbdev - it has served me far better in the past than vesa.  But this is quite subjective as I know next to nothing about video drivers.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#5 2014-09-06 19:52:45

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: [SOLVED] Can't make X Server start

Not an Installation issue, moving to Apps and DEs...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#6 2014-09-06 19:56:10

CarlD
Member
From: London
Registered: 2013-11-23
Posts: 128

Re: [SOLVED] Can't make X Server start

I am wondering then if VESA may have had its day as the de-facto fallback driver since x is no longer run as root. If so, then that would have serious implications for users where their primary driver fails for whatever reason (e.g. dodgy update).

I'll give fbdev a crack and see if it has the same issue as VESA before reporting back.

Offline

#7 2014-09-06 20:08:19

Gusar
Member
Registered: 2009-08-25
Posts: 3,607

Re: [SOLVED] Can't make X Server start

Rather than fbdev, modesetting is the modern fallback driver. In fact, one of the X devs wants to put xf86-video-modesetting into the X source tree, then add DRI and glamor support to it. This would eliminate the need for hardware specific X drivers - KMS would take care of modesetting and mesa would take care of 2d accel.

Offline

#8 2014-09-06 20:22:59

CarlD
Member
From: London
Registered: 2013-11-23
Posts: 128

Re: [SOLVED] Can't make X Server start

Interesting! Thanks again, Gusar. Well, guess I'll be playing with KMS too...

Offline

#9 2014-09-06 22:50:11

x-yuri
Member
Registered: 2013-01-06
Posts: 161

Re: [SOLVED] Can't make X Server start

I'm not really particular about using vesa. I tried different variants, but all of them failed. For now, I just won't to make it work. In any possible way. So, I installed xf86-video-nouveau. And here's what's in the log:

[   222.192] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[   222.192] X Protocol Version 11, Revision 0
[   222.192] Build Operating System: Linux 3.15.5-2-ARCH x86_64 
[   222.192] Current Operating System: Linux yuri 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[   222.192] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=UUID=0af04039-1ff7-4c6e-b1ad-9ba5569bd682 rw initrd=../initramfs-linux.img
[   222.192] Build Date: 31 July 2014  11:53:19AM
[   222.192]  
[   222.192] Current version of pixman: 0.32.6
[   222.192] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   222.192] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   222.192] (==) Log file: "/home/yuri/.local/share/xorg/Xorg.0.log", Time: Sun Sep  7 04:42:24 2014
[   222.202] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   222.206] (==) No Layout section.  Using the first Screen section.
[   222.206] (==) No screen section available. Using defaults.
[   222.206] (**) |-->Screen "Default Screen Section" (0)
[   222.206] (**) |   |-->Monitor "<default monitor>"
[   222.206] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   222.207] (==) Automatically adding devices
[   222.207] (==) Automatically enabling devices
[   222.207] (==) Automatically adding GPU devices
[   222.207] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   222.207] 	Entry deleted from font path.
[   222.207] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   222.207] 	Entry deleted from font path.
[   222.207] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   222.207] 	Entry deleted from font path.
[   222.207] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   222.207] 	Entry deleted from font path.
[   222.207] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   222.207] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   222.207] 	Entry deleted from font path.
[   222.207] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   222.207] (==) FontPath set to:
	/usr/share/fonts/misc/
[   222.207] (==) ModulePath set to "/usr/lib/xorg/modules"
[   222.207] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   222.208] (II) Loader magic: 0x818d80
[   222.208] (II) Module ABI versions:
[   222.208] 	X.Org ANSI C Emulation: 0.4
[   222.208] 	X.Org Video Driver: 18.0
[   222.208] 	X.Org XInput driver : 21.0
[   222.208] 	X.Org Server Extension : 8.0
[   222.209] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   222.209] (II) xfree86: Adding drm device (/dev/dri/card0)
[   222.209] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[   222.211] (--) PCI:*(0:1:0:0) 10de:0a65:1043:83f4 rev 162, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   222.211] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   222.211] (II) LoadModule: "glx"
[   222.211] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   222.228] (II) Module glx: vendor="X.Org Foundation"
[   222.228] 	compiled for 1.16.0, module version = 1.0.0
[   222.228] 	ABI class: X.Org Server Extension, version 8.0
[   222.228] (==) AIGLX enabled
[   222.228] (==) Matched nouveau as autoconfigured driver 0
[   222.228] (==) Matched nvidia as autoconfigured driver 1
[   222.228] (==) Matched nv as autoconfigured driver 2
[   222.228] (==) Matched nouveau as autoconfigured driver 3
[   222.228] (==) Matched nvidia as autoconfigured driver 4
[   222.228] (==) Matched nv as autoconfigured driver 5
[   222.228] (==) Matched modesetting as autoconfigured driver 6
[   222.228] (==) Matched fbdev as autoconfigured driver 7
[   222.228] (==) Matched vesa as autoconfigured driver 8
[   222.228] (==) Assigned the driver to the xf86ConfigLayout
[   222.228] (II) LoadModule: "nouveau"
[   222.228] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   222.228] (II) Module nouveau: vendor="X.Org Foundation"
[   222.229] 	compiled for 1.16.0, module version = 1.0.10
[   222.229] 	Module class: X.Org Video Driver
[   222.229] 	ABI class: X.Org Video Driver, version 18.0
[   222.229] (II) LoadModule: "nvidia"
[   222.229] (WW) Warning, couldn't open module nvidia
[   222.229] (II) UnloadModule: "nvidia"
[   222.229] (II) Unloading nvidia
[   222.229] (EE) Failed to load module "nvidia" (module does not exist, 0)
[   222.229] (II) LoadModule: "nv"
[   222.229] (WW) Warning, couldn't open module nv
[   222.229] (II) UnloadModule: "nv"
[   222.229] (II) Unloading nv
[   222.229] (EE) Failed to load module "nv" (module does not exist, 0)
[   222.229] (II) LoadModule: "modesetting"
[   222.229] (WW) Warning, couldn't open module modesetting
[   222.229] (II) UnloadModule: "modesetting"
[   222.229] (II) Unloading modesetting
[   222.229] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   222.229] (II) LoadModule: "fbdev"
[   222.229] (WW) Warning, couldn't open module fbdev
[   222.229] (II) UnloadModule: "fbdev"
[   222.229] (II) Unloading fbdev
[   222.229] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   222.229] (II) LoadModule: "vesa"
[   222.230] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   222.237] (II) Module vesa: vendor="X.Org Foundation"
[   222.237] 	compiled for 1.16.0, module version = 2.3.2
[   222.237] 	Module class: X.Org Video Driver
[   222.237] 	ABI class: X.Org Video Driver, version 18.0
[   222.237] (II) NOUVEAU driver 
[   222.237] (II) NOUVEAU driver for NVIDIA chipset families :
[   222.237] 	RIVA TNT        (NV04)
[   222.237] 	RIVA TNT2       (NV05)
[   222.237] 	GeForce 256     (NV10)
[   222.237] 	GeForce 2       (NV11, NV15)
[   222.237] 	GeForce 4MX     (NV17, NV18)
[   222.237] 	GeForce 3       (NV20)
[   222.237] 	GeForce 4Ti     (NV25, NV28)
[   222.237] 	GeForce FX      (NV3x)
[   222.237] 	GeForce 6       (NV4x)
[   222.237] 	GeForce 7       (G7x)
[   222.237] 	GeForce 8       (G8x)
[   222.237] 	GeForce GTX 200 (NVA0)
[   222.237] 	GeForce GTX 400 (NVC0)
[   222.237] (II) VESA: driver for VESA chipsets: vesa
[   222.237] (++) using VT number 1

[   222.237] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   222.237] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   222.237] (II) systemd-logind: releasing fd for 226:0
[   222.237] (II) [drm] nouveau interface version: 1.1.1
[   222.237] (WW) Falling back to old probe method for vesa
[   222.237] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   222.237] (II) Loading sub module "dri2"
[   222.237] (II) LoadModule: "dri2"
[   222.237] (II) Module "dri2" already built-in
[   222.237] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[   222.237] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   222.237] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[   222.237] (==) NOUVEAU(0): RGB weight 888
[   222.237] (==) NOUVEAU(0): Default visual is TrueColor
[   222.237] (==) NOUVEAU(0): Using HW cursor
[   222.237] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[   222.237] (==) NOUVEAU(0): Page flipping enabled
[   222.237] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[   222.301] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[   222.303] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[   222.324] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[   222.378] (II) NOUVEAU(0): EDID for output DVI-I-1
[   222.378] (II) NOUVEAU(0): Manufacturer: SAM  Model: a7a  Serial#: 0
[   222.378] (II) NOUVEAU(0): Year: 2012  Week: 46
[   222.378] (II) NOUVEAU(0): EDID Version: 1.3
[   222.378] (II) NOUVEAU(0): Digital Display Input
[   222.378] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 70  vert.: 39
[   222.378] (II) NOUVEAU(0): Gamma: 2.20
[   222.378] (II) NOUVEAU(0): No DPMS capabilities specified
[   222.378] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   222.378] (II) NOUVEAU(0): First detailed timing is preferred mode
[   222.378] (II) NOUVEAU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[   222.378] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[   222.378] (II) NOUVEAU(0): Supported established timings:
[   222.378] (II) NOUVEAU(0): 720x400@70Hz
[   222.378] (II) NOUVEAU(0): 640x480@60Hz
[   222.378] (II) NOUVEAU(0): 640x480@67Hz
[   222.378] (II) NOUVEAU(0): 640x480@72Hz
[   222.378] (II) NOUVEAU(0): 640x480@75Hz
[   222.378] (II) NOUVEAU(0): 800x600@60Hz
[   222.378] (II) NOUVEAU(0): 800x600@72Hz
[   222.378] (II) NOUVEAU(0): 800x600@75Hz
[   222.378] (II) NOUVEAU(0): 832x624@75Hz
[   222.378] (II) NOUVEAU(0): 1024x768@60Hz
[   222.378] (II) NOUVEAU(0): 1024x768@70Hz
[   222.378] (II) NOUVEAU(0): 1024x768@75Hz
[   222.378] (II) NOUVEAU(0): 1280x1024@75Hz
[   222.378] (II) NOUVEAU(0): 1152x864@75Hz
[   222.378] (II) NOUVEAU(0): Manufacturer's mask: 0
[   222.378] (II) NOUVEAU(0): Supported standard timings:
[   222.378] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   222.378] (II) NOUVEAU(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   222.378] (II) NOUVEAU(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   222.378] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   222.378] (II) NOUVEAU(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   222.378] (II) NOUVEAU(0): #5: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[   222.378] (II) NOUVEAU(0): #6: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[   222.378] (II) NOUVEAU(0): Supported detailed timing:
[   222.378] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  1060 x 626 mm
[   222.378] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   222.378] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   222.378] (II) NOUVEAU(0): Supported detailed timing:
[   222.378] (II) NOUVEAU(0): clock: 85.5 MHz   Image Size:  1060 x 626 mm
[   222.378] (II) NOUVEAU(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
[   222.378] (II) NOUVEAU(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
[   222.378] (II) NOUVEAU(0): Ranges: V min: 24 V max: 75 Hz, H min: 15 H max: 81 kHz, PixClock max 235 MHz
[   222.378] (II) NOUVEAU(0): Monitor name: SAMSUNG
[   222.378] (II) NOUVEAU(0): Supported detailed timing:
[   222.378] (II) NOUVEAU(0): clock: 74.2 MHz   Image Size:  1060 x 626 mm
[   222.378] (II) NOUVEAU(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[   222.378] (II) NOUVEAU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[   222.378] (II) NOUVEAU(0): Supported detailed timing:
[   222.378] (II) NOUVEAU(0): clock: 74.2 MHz   Image Size:  1060 x 626 mm
[   222.378] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   222.378] (II) NOUVEAU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[   222.378] (II) NOUVEAU(0): Supported detailed timing:
[   222.378] (II) NOUVEAU(0): clock: 74.2 MHz   Image Size:  1060 x 626 mm
[   222.378] (II) NOUVEAU(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[   222.378] (II) NOUVEAU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[   222.378] (II) NOUVEAU(0): Supported detailed timing:
[   222.378] (II) NOUVEAU(0): clock: 74.2 MHz   Image Size:  1060 x 626 mm
[   222.378] (II) NOUVEAU(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[   222.378] (II) NOUVEAU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[   222.378] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[   222.378] (II) NOUVEAU(0): EDID (in hex):
[   222.378] (II) NOUVEAU(0): 	00ffffffffffff004c2d7a0a00000000
[   222.378] (II) NOUVEAU(0): 	2e160103804627780aee91a3544c9926
[   222.378] (II) NOUVEAU(0): 	0f5054bdef80714f81c0810081809500
[   222.378] (II) NOUVEAU(0): 	a9c0b3000101023a801871382d40582c
[   222.378] (II) NOUVEAU(0): 	450024724200001e662156aa51001e30
[   222.378] (II) NOUVEAU(0): 	468f330024724200001e000000fd0018
[   222.379] (II) NOUVEAU(0): 	4b0f5117000a202020202020000000fc
[   222.379] (II) NOUVEAU(0): 	0053414d53554e470a20202020200189
[   222.379] (II) NOUVEAU(0): 	020325f14d901f041305140312202122
[   222.379] (II) NOUVEAU(0): 	07162309070783010000e2000f67030c
[   222.379] (II) NOUVEAU(0): 	002000b82d011d80d0721c1620102c25
[   222.379] (II) NOUVEAU(0): 	8024724200009e011d8018711c162058
[   222.379] (II) NOUVEAU(0): 	2c250024724200009e011d00bc52d01e
[   222.379] (II) NOUVEAU(0): 	20b828554024724200001e011d007251
[   222.379] (II) NOUVEAU(0): 	d01e206e28550024724200001e8c0ad0
[   222.379] (II) NOUVEAU(0): 	90204031200c4055002472420000182c
[   222.379] (--) NOUVEAU(0): HDMI max TMDS frequency 225000KHz
[   222.379] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1600x900"x60.0  118.96  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[   222.379] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1440x576i"x50.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1440x480i"x60.0   27.03  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "1440x480i"x59.9   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   222.379] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   222.381] (II) NOUVEAU(0): EDID for output HDMI-1
[   222.402] (II) NOUVEAU(0): EDID for output VGA-1
[   222.402] (II) NOUVEAU(0): Output DVI-I-1 connected
[   222.402] (II) NOUVEAU(0): Output HDMI-1 disconnected
[   222.402] (II) NOUVEAU(0): Output VGA-1 disconnected
[   222.402] (II) NOUVEAU(0): Using exact sizes for initial modes
[   222.402] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[   222.402] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   222.402] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 56.2 kHz, 50.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.4 MHz (scaled from 0.0 MHz), 67.4 kHz, 59.9 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080i": 74.2 MHz (scaled from 0.0 MHz), 33.8 kHz, 60.0 Hz (I)
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080i": 74.2 MHz (scaled from 0.0 MHz), 28.1 kHz, 50.0 Hz (I)
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080": 74.2 MHz (scaled from 0.0 MHz), 33.8 kHz, 30.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080": 74.2 MHz (scaled from 0.0 MHz), 28.1 kHz, 25.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080": 74.2 MHz (scaled from 0.0 MHz), 27.0 kHz, 24.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080i": 74.2 MHz (scaled from 0.0 MHz), 33.7 kHz, 59.9 Hz (I)
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080": 74.2 MHz (scaled from 0.0 MHz), 33.7 kHz, 30.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1920x1080": 74.2 MHz (scaled from 0.0 MHz), 27.0 kHz, 24.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   222.402] (**) NOUVEAU(0):  Mode "1600x900": 119.0 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1600x900"x60.0  118.96  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[   222.402] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1366x768": 85.5 MHz (scaled from 0.0 MHz), 47.7 kHz, 59.8 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 59.9 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1440x576i": 27.0 MHz (scaled from 0.0 MHz), 15.6 kHz, 50.0 Hz (I)
[   222.402] (II) NOUVEAU(0): Modeline "1440x576i"x50.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[   222.402] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   222.402] (**) NOUVEAU(0):  Driver mode "1440x480i": 27.0 MHz (scaled from 0.0 MHz), 15.8 kHz, 60.0 Hz (I)
[   222.402] (II) NOUVEAU(0): Modeline "1440x480i"x60.0   27.03  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "1440x480i": 27.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 59.9 Hz (I)
[   222.403] (II) NOUVEAU(0): Modeline "1440x480i"x59.9   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[   222.403] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[   222.403] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[   222.403] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[   222.403] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "720x576": 27.0 MHz (scaled from 0.0 MHz), 31.2 kHz, 50.0 Hz
[   222.403] (II) NOUVEAU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "720x480": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[   222.403] (II) NOUVEAU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "720x480": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[   222.403] (II) NOUVEAU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[   222.403] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[   222.403] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[   222.403] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[   222.403] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[   222.403] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   222.403] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[   222.403] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   222.403] (==) NOUVEAU(0): DPI set to (96, 96)
[   222.403] (II) Loading sub module "fb"
[   222.403] (II) LoadModule: "fb"
[   222.403] (II) Loading /usr/lib/xorg/modules/libfb.so
[   222.411] (II) Module fb: vendor="X.Org Foundation"
[   222.411] 	compiled for 1.16.0, module version = 1.0.0
[   222.411] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   222.411] (II) Loading sub module "exa"
[   222.411] (II) LoadModule: "exa"
[   222.411] (II) Loading /usr/lib/xorg/modules/libexa.so
[   222.412] (II) Module exa: vendor="X.Org Foundation"
[   222.412] 	compiled for 1.16.0, module version = 2.6.0
[   222.412] 	ABI class: X.Org Video Driver, version 18.0
[   222.412] (II) Loading sub module "shadowfb"
[   222.412] (II) LoadModule: "shadowfb"
[   222.412] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[   222.412] (II) Module shadowfb: vendor="X.Org Foundation"
[   222.412] 	compiled for 1.16.0, module version = 1.0.0
[   222.412] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   222.412] (II) UnloadModule: "vesa"
[   222.412] (II) Unloading vesa
[   222.413] (--) Depth 24 pixmap format is 32 bpp
[   222.413] (II) NOUVEAU(0): Opened GPU channel 0
[   222.416] (II) NOUVEAU(0): [DRI2] Setup complete
[   222.416] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[   222.416] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[   222.418] (II) EXA(0): Driver allocated offscreen pixmaps
[   222.418] (II) EXA(0): Driver registered support for the following operations:
[   222.418] (II)         Solid
[   222.418] (II)         Copy
[   222.418] (II)         Composite (RENDER acceleration)
[   222.418] (II)         UploadToScreen
[   222.418] (II)         DownloadFromScreen
[   222.418] (==) NOUVEAU(0): Backing store enabled
[   222.418] (==) NOUVEAU(0): Silken mouse enabled
[   222.419] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[   222.419] (II) NOUVEAU(0): [XvMC] Extension initialized.
[   222.419] (==) NOUVEAU(0): DPMS enabled
[   222.419] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   222.420] (--) RandR disabled
[   222.460] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   222.460] (II) AIGLX: enabled GLX_ARB_create_context
[   222.460] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   222.460] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   222.460] (II) AIGLX: enabled GLX_INTEL_swap_event
[   222.460] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   222.460] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   222.460] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   222.460] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   222.461] (II) AIGLX: Loaded and initialized nouveau
[   222.461] (II) GLX: Initialized DRI2 GL provider for screen 0
[   222.464] (II) NOUVEAU(0): NVEnterVT is called.
[   222.464] Unable to get master: Permission denied
[   222.482] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[   222.482] resize called 1920 1080
[   222.574] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[   222.574] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   222.574] (II) LoadModule: "evdev"
[   222.574] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   222.578] (II) Module evdev: vendor="X.Org Foundation"
[   222.578] 	compiled for 1.16.0, module version = 2.9.0
[   222.578] 	Module class: X.Org XInput Driver
[   222.578] 	ABI class: X.Org XInput driver, version 21.0
[   222.578] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 12 paused 0
[   222.578] (II) Using input driver 'evdev' for 'Power Button'
[   222.578] (**) Power Button: always reports core events
[   222.578] (**) evdev: Power Button: Device: "/dev/input/event7"
[   222.578] (--) evdev: Power Button: Vendor 0 Product 0x1
[   222.578] (--) evdev: Power Button: Found keys
[   222.578] (II) evdev: Power Button: Configuring as keyboard
[   222.578] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event7"
[   222.578] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   222.578] (**) Option "xkb_rules" "evdev"
[   222.578] (**) Option "xkb_model" "pc104"
[   222.578] (**) Option "xkb_layout" "us"
[   222.601] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[   222.601] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   222.602] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 13 paused 0
[   222.602] (II) Using input driver 'evdev' for 'Power Button'
[   222.602] (**) Power Button: always reports core events
[   222.602] (**) evdev: Power Button: Device: "/dev/input/event6"
[   222.602] (--) evdev: Power Button: Vendor 0 Product 0x1
[   222.602] (--) evdev: Power Button: Found keys
[   222.602] (II) evdev: Power Button: Configuring as keyboard
[   222.602] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8/event6"
[   222.602] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   222.602] (**) Option "xkb_rules" "evdev"
[   222.602] (**) Option "xkb_model" "pc104"
[   222.602] (**) Option "xkb_layout" "us"
[   222.603] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[   222.603] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   222.603] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 14 paused 0
[   222.603] (II) Using input driver 'evdev' for 'Sleep Button'
[   222.603] (**) Sleep Button: always reports core events
[   222.603] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[   222.603] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   222.603] (--) evdev: Sleep Button: Found keys
[   222.603] (II) evdev: Sleep Button: Configuring as keyboard
[   222.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event5"
[   222.603] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   222.603] (**) Option "xkb_rules" "evdev"
[   222.603] (**) Option "xkb_model" "pc104"
[   222.603] (**) Option "xkb_layout" "us"
[   222.604] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[   222.604] (II) No input driver specified, ignoring this device.
[   222.604] (II) This device may have been added with another device file.
[   222.604] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[   222.604] (II) No input driver specified, ignoring this device.
[   222.604] (II) This device may have been added with another device file.
[   222.605] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[   222.605] (II) No input driver specified, ignoring this device.
[   222.605] (II) This device may have been added with another device file.
[   222.605] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[   222.605] (II) No input driver specified, ignoring this device.
[   222.605] (II) This device may have been added with another device file.
[   222.605] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
[   222.605] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[   222.606] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 15 paused 0
[   222.606] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[   222.606] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[   222.606] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
[   222.606] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[   222.606] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[   222.606] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[   222.606] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[   222.606] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[   222.606] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[   222.606] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[   222.606] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[   222.606] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   222.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input2/event0"
[   222.606] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 9)
[   222.606] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[   222.606] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[   222.606] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[   222.606] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[   222.606] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[   222.607] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
[   222.607] (II) No input driver specified, ignoring this device.
[   222.607] (II) This device may have been added with another device file.
[   222.607] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4002 (/dev/input/event1)
[   222.607] (**) Logitech Unifying Device. Wireless PID:4002: Applying InputClass "evdev keyboard catchall"
[   222.607] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 16 paused 0
[   222.607] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4002'
[   222.607] (**) Logitech Unifying Device. Wireless PID:4002: always reports core events
[   222.607] (**) evdev: Logitech Unifying Device. Wireless PID:4002: Device: "/dev/input/event1"
[   222.608] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Vendor 0x46d Product 0xc52b
[   222.608] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found 1 mouse buttons
[   222.608] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found scroll wheel(s)
[   222.608] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found relative axes
[   222.608] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing relative x/y axes to exist.
[   222.608] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found absolute axes
[   222.608] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing absolute x/y axes to exist.
[   222.608] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found keys
[   222.608] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as mouse
[   222.608] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as keyboard
[   222.608] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Adding scrollwheel support
[   222.608] (**) evdev: Logitech Unifying Device. Wireless PID:4002: YAxisMapping: buttons 4 and 5
[   222.608] (**) evdev: Logitech Unifying Device. Wireless PID:4002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   222.608] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input3/event1"
[   222.608] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4002" (type: KEYBOARD, id 10)
[   222.608] (**) Option "xkb_rules" "evdev"
[   222.608] (**) Option "xkb_model" "pc104"
[   222.608] (**) Option "xkb_layout" "us"
[   222.608] (II) evdev: Logitech Unifying Device. Wireless PID:4002: initialized for relative axes.
[   222.608] (WW) evdev: Logitech Unifying Device. Wireless PID:4002: ignoring absolute axes.
[   222.608] (**) Logitech Unifying Device. Wireless PID:4002: (accel) keeping acceleration scheme 1
[   222.608] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration profile 0
[   222.608] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration factor: 2.000
[   222.608] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration threshold: 4
[   222.609] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4002 (/dev/input/event2)
[   222.609] (**) Logitech Unifying Device. Wireless PID:4002: Applying InputClass "evdev keyboard catchall"
[   222.609] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 17 paused 0
[   222.609] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4002'
[   222.609] (**) Logitech Unifying Device. Wireless PID:4002: always reports core events
[   222.609] (**) evdev: Logitech Unifying Device. Wireless PID:4002: Device: "/dev/input/event2"
[   222.609] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Vendor 0x46d Product 0xc52b
[   222.609] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found 1 mouse buttons
[   222.609] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found scroll wheel(s)
[   222.609] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found relative axes
[   222.609] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing relative x/y axes to exist.
[   222.609] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found absolute axes
[   222.609] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing absolute x/y axes to exist.
[   222.609] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found keys
[   222.609] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as mouse
[   222.609] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as keyboard
[   222.609] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Adding scrollwheel support
[   222.609] (**) evdev: Logitech Unifying Device. Wireless PID:4002: YAxisMapping: buttons 4 and 5
[   222.609] (**) evdev: Logitech Unifying Device. Wireless PID:4002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   222.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input4/event2"
[   222.609] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4002" (type: KEYBOARD, id 11)
[   222.609] (**) Option "xkb_rules" "evdev"
[   222.609] (**) Option "xkb_model" "pc104"
[   222.609] (**) Option "xkb_layout" "us"
[   222.610] (II) evdev: Logitech Unifying Device. Wireless PID:4002: initialized for relative axes.
[   222.610] (WW) evdev: Logitech Unifying Device. Wireless PID:4002: ignoring absolute axes.
[   222.610] (**) Logitech Unifying Device. Wireless PID:4002: (accel) keeping acceleration scheme 1
[   222.610] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration profile 0
[   222.610] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration factor: 2.000
[   222.610] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration threshold: 4
[   222.610] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4002 (/dev/input/event3)
[   222.610] (**) Logitech Unifying Device. Wireless PID:4002: Applying InputClass "evdev keyboard catchall"
[   222.611] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 18 paused 0
[   222.611] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4002'
[   222.611] (**) Logitech Unifying Device. Wireless PID:4002: always reports core events
[   222.611] (**) evdev: Logitech Unifying Device. Wireless PID:4002: Device: "/dev/input/event3"
[   222.611] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Vendor 0x46d Product 0xc52b
[   222.611] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found 1 mouse buttons
[   222.611] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found scroll wheel(s)
[   222.611] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found relative axes
[   222.611] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing relative x/y axes to exist.
[   222.611] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found absolute axes
[   222.611] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing absolute x/y axes to exist.
[   222.611] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found keys
[   222.611] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as mouse
[   222.611] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as keyboard
[   222.611] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Adding scrollwheel support
[   222.611] (**) evdev: Logitech Unifying Device. Wireless PID:4002: YAxisMapping: buttons 4 and 5
[   222.611] (**) evdev: Logitech Unifying Device. Wireless PID:4002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   222.611] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0007/input/input5/event3"
[   222.611] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4002" (type: KEYBOARD, id 12)
[   222.611] (**) Option "xkb_rules" "evdev"
[   222.611] (**) Option "xkb_model" "pc104"
[   222.611] (**) Option "xkb_layout" "us"
[   222.611] (II) evdev: Logitech Unifying Device. Wireless PID:4002: initialized for relative axes.
[   222.611] (WW) evdev: Logitech Unifying Device. Wireless PID:4002: ignoring absolute axes.
[   222.611] (**) Logitech Unifying Device. Wireless PID:4002: (accel) keeping acceleration scheme 1
[   222.611] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration profile 0
[   222.612] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration factor: 2.000
[   222.612] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration threshold: 4
[   222.612] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event4)
[   222.612] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[   222.612] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 19 paused 0
[   222.612] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[   222.612] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[   222.612] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event4"
[   222.612] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[   222.612] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[   222.612] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[   222.612] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[   222.612] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[   222.613] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[   222.613] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[   222.613] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[   222.613] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   222.613] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0008/input/input6/event4"
[   222.613] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 13)
[   222.613] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[   222.613] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[   222.613] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[   222.613] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[   222.613] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[   222.613] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse1)
[   222.613] (II) No input driver specified, ignoring this device.
[   222.613] (II) This device may have been added with another device file.
[   222.613] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event9)
[   222.613] (II) No input driver specified, ignoring this device.
[   222.613] (II) This device may have been added with another device file.
[   222.614] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event10)
[   222.614] (II) No input driver specified, ignoring this device.
[   222.614] (II) This device may have been added with another device file.
[   222.614] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event11)
[   222.614] (II) No input driver specified, ignoring this device.
[   222.614] (II) This device may have been added with another device file.
[   222.614] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event12)
[   222.614] (II) No input driver specified, ignoring this device.
[   222.614] (II) This device may have been added with another device file.
[   222.614] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event13)
[   222.614] (II) No input driver specified, ignoring this device.
[   222.614] (II) This device may have been added with another device file.
[   222.614] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event18)
[   222.614] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[   222.615] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 20 paused 0
[   222.615] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[   222.615] (**) UVC Camera (046d:0825): always reports core events
[   222.615] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event18"
[   222.615] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[   222.615] (--) evdev: UVC Camera (046d:0825): Found keys
[   222.615] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[   222.615] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input21/event18"
[   222.615] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 14)
[   222.615] (**) Option "xkb_rules" "evdev"
[   222.615] (**) Option "xkb_model" "pc104"
[   222.615] (**) Option "xkb_layout" "us"
[   222.615] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[   222.615] (II) No input driver specified, ignoring this device.
[   222.615] (II) This device may have been added with another device file.
[   222.634] (II) evdev: UVC Camera (046d:0825): Close
[   222.634] (II) UnloadModule: "evdev"
[   222.634] (II) systemd-logind: releasing fd for 13:82
[   222.686] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Close
[   222.686] (II) UnloadModule: "evdev"
[   222.686] (II) systemd-logind: releasing fd for 13:68
[   222.743] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Close
[   222.743] (II) UnloadModule: "evdev"
[   222.743] (II) systemd-logind: releasing fd for 13:67
[   222.796] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Close
[   222.796] (II) UnloadModule: "evdev"
[   222.796] (II) systemd-logind: releasing fd for 13:66
[   222.850] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Close
[   222.850] (II) UnloadModule: "evdev"
[   222.850] (II) systemd-logind: releasing fd for 13:65
[   222.903] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Close
[   222.903] (II) UnloadModule: "evdev"
[   222.903] (II) systemd-logind: releasing fd for 13:64
[   222.956] (II) evdev: Sleep Button: Close
[   222.956] (II) UnloadModule: "evdev"
[   222.956] (II) systemd-logind: releasing fd for 13:69
[   222.983] (II) evdev: Power Button: Close
[   222.983] (II) UnloadModule: "evdev"
[   222.983] (II) systemd-logind: releasing fd for 13:70
[   223.010] (II) evdev: Power Button: Close
[   223.010] (II) UnloadModule: "evdev"
[   223.010] (II) systemd-logind: releasing fd for 13:71
[   223.038] (II) NOUVEAU(0): NVLeaveVT is called.
[   223.038] Error dropping master: -13(Permission denied)
[   223.038] (II) NOUVEAU(0): Closed GPU channel 0
[   223.153] (EE) Server terminated successfully (0). Closing log file.

Last edited by x-yuri (2014-09-06 22:51:10)

Offline

#10 2014-09-06 23:05:52

Gusar
Member
Registered: 2009-08-25
Posts: 3,607

Re: [SOLVED] Can't make X Server start

Server terminated successfully (0)

It works. But it had nothing to do, so it shut down. Give it something to run.

PS. This is quite common, some people install only X and nothing else, then say it doesn't work. But it's a display server. If you don't give it apps to display, what do you expect X to do by itself?

Last edited by Gusar (2014-09-06 23:09:25)

Offline

#11 2014-09-06 23:33:25

x-yuri
Member
Registered: 2013-01-06
Posts: 161

Re: [SOLVED] Can't make X Server start

Indeed, I installed gnome group, added `exec gnome-session` to ~/.xinitrc and am writing this post from inside GNOME's web browser. Thanks guys smile

Offline

#12 2014-09-06 23:42:12

x-yuri
Member
Registered: 2013-01-06
Posts: 161

Re: [SOLVED] Can't make X Server start

Gusar wrote:

It works. But it had nothing to do, so it shut down. Give it something to run.

PS. This is quite common, some people install only X and nothing else, then say it doesn't work. But it's a display server. If you don't give it apps to display, what do you expect X to do by itself?

Speaking of which, the wiki says: "To determine which client to run, startx will first look for ~/.xinitrc to run as a shell script. In case the user file does not exist, the system default at /etc/X11/xinit/xinitrc will be used. This will start a basic environment with Twm, xclock and Xterm (assuming that the necessary packages are installed). See xinitrc for configuration details." It made me think, something should run even if I didn't install any desktop environment.

Last edited by x-yuri (2014-09-06 23:44:42)

Offline

Pages: 1

Board footer

Powered by FluxBB