Arch Linux

bond

Member

From: Melbourne, Australia

Registered: 2009-05-05

Posts: 62

Intel NUC DN2820 Power Hang

Roughly ever second poweroff the NUC runs through the power down procedure then hangs - device sits there and doesn't fully halt.

I have a smart powerboard that switches off the rest of the equipment - which isn't work because the NUC isn't powering off correctly ...

~$ uname -r
3.16.1-1-ARCH

Bios version: FY0038.BIO (latest at time of posting)

any tips?

jpp17

Member

Registered: 2014-09-09

Posts: 1

Re: Intel NUC DN2820 Power Hang

With same NUC, debian 7.6, I can not power off the box, same messages,
ACPI ?
jpp:~$ uname -r
3.2.0-4-amd64

At power off time I got in /var/log/kern.log
...
Sep  8 22:06:33 nuc-jpp kernel: [    0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/t
bfadt-288)
...

At  boot time I got (last 5 lines)
jpp:/# grep acpi /var/log/kern.log
...
Sep  9 18:54:43 nuc-jpp kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  9 18:54:43 nuc-jpp kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Sep  9 18:54:43 nuc-jpp kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  9 18:54:43 nuc-jpp kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  9 18:54:43 nuc-jpp kernel: [    0.441770] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

???

bonneville

Member

Registered: 2014-09-26

Posts: 2

Re: Intel NUC DN2820 Power Hang

I had the same problem.

You need to go into the virtual BIOS and change under

Boot Order - Advanced - Boot Configuaration - UEFI Boot

the OS Selection from "Windows 8.x" to "Windows 7"

Then your Linux system will shutdown properly.

Greetinx

bonneville

bond

Member

From: Melbourne, Australia

Registered: 2009-05-05

Posts: 62

Re: Intel NUC DN2820 Power Hang

Had that setting already set to 'Windows 7' - no dice, have updated to bios 39, still an issue

bonneville

Member

Registered: 2014-09-26

Posts: 2

Re: Intel NUC DN2820 Power Hang

Sorry to hear that. It worked for me on Debian Wheezy with Bios 39 ...