Default audio device resets to HDMI

johane · 2014-10-16 14:12:18

I have recently installed arch (again) and this time I used Pulseaudio. I have always used ALSA before. Now I cant get my system to remember Internal analog audio as my default audio device. It resets to HDMI at every boot/login.
I have followed the pulse audio examples guide. Defaulting to an analog output source But that results in no sound at all.
I am clearly doing something wrong but cant figure out what.

$ aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Gives card 1 subdevice 0 => load-module module-alsa-sink device=hw:1,0 (when I add this line, pulse audio wont even start)

$ pacmd list-sinks

1 sink(s) available.
  * index: 0
        name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE 
        priority: 9959
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 0,00 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 0
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
        card: 2 <alsa_card.pci-0000_00_1b.0>
        module: 8
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC892 Analog"
                alsa.id = "ALC892 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xdb910000 irq 49"
                alsa.driver_name = "snd_hda_intel"                                                                                                                                     
                device.bus_path = "pci-0000:00:1b.0"                                                                                                                                   
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"                                                                                                            
                device.bus = "pci"                                                                                                                                                     
                device.vendor.id = "8086"                                                                                                                                              
                device.vendor.name = "Intel Corporation"                                                                                                                               
                device.product.id = "8c20"                                                                                                                                             
                device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "front:1"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Built-in Audio Analog Stereo"
                alsa.mixer_name = "Realtek ALC892"
                alsa.components = "HDA:10ec0892,1458a002,00100302"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
                        properties:

                analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-headphones"
        active port: <analog-output-lineout>

Gives index 0
My index changes now and then so I have tried with the name "alsa_output.pci-0000_00_1b.0.analog-stereo" but it does not work either.

I have disabled every HDMI device in pavucontrol but it still resets to HDMI in systemsettings/multimedia.

Last edited by johane (2014-10-16 14:18:18)

smudge · 2014-10-18 20:58:52

I don't use pulse so can't be sure but you might need: https://wiki.archlinux.org/index.php/Al … sound_card.

johane · 2014-10-21 14:03:12

It looks like the right card already is default. :\

"
sysdefault:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
"

$ aplay -L

null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
default
    Default ALSA Output (currently PulseAudio Sound Server)
hdmi:CARD=HDMI,DEV=0
    HDA Intel HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA Intel HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA Intel HDMI, HDMI 2
    HDMI Audio Output
sysdefault:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Digital
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 2
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 3
    HDMI Audio Output

Arch Linux

#1 2014-10-16 14:12:18

Default audio device resets to HDMI

#2 2014-10-18 20:58:52

Re: Default audio device resets to HDMI

#3 2014-10-21 14:03:12

Re: Default audio device resets to HDMI

Board footer