You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2014-10-24 14:02:18
- boriscougar
- Member
- From: Guatemala
- Registered: 2008-10-11
- Posts: 30
- Website
HP 13 split x2 won't suspend
Hi,
After a couple of days using arch on my laptop well i've seen the behavior of when i close the lid it starts suspension process and i even got the blinking light on the side like when it is suspended but after well a couple of seconds it wakes up with no reason,
my dmesg while suspending:
[boris@arch ~]$ dmesg
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda6 rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009269efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009269f000-0x0000000092eaefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000092eaf000-0x0000000092faefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000092faf000-0x0000000092ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000092fff000-0x0000000092ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000093000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x70eaf018-0x70ebf057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000070eaf017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070eaf018-0x0000000070ebf057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070ebf058-0x000000009269efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009269f000-0x0000000092eaefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000092eaf000-0x0000000092faefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000092faf000-0x0000000092ffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000092fff000-0x0000000092ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000015f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x92ffe000 ACPI 2.0=0x92ffe014 SMBIOS=0x92eaef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB)
[ 0.000000] efi: mem06: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[ 0.000000] efi: mem07: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem08: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem09: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem10: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x000000000009e000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem12: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem14: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f53000) (15MB)
[ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x0000000001f53000-0x00000000686b0000) (1639MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000686b0000-0x00000000686d0000) (0MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000686d0000-0x0000000070eaf000) (135MB)
[ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x0000000070eaf000-0x0000000070ec0000) (0MB)
[ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x0000000070ec0000-0x0000000072e13000) (31MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x0000000072e13000-0x00000000736a0000) (8MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000736a0000-0x00000000736aa000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000736aa000-0x00000000736af000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000736af000-0x0000000073898000) (1MB)
[ 0.000000] efi: mem24: type=1, attr=0xf, range=[0x0000000073898000-0x00000000738af000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000738af000-0x0000000076b17000) (50MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x0000000076b17000-0x0000000077c9b000) (17MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x0000000077c9b000-0x0000000077d8e000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x0000000077d8e000-0x0000000077dda000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x0000000077dda000-0x0000000077ddc000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x0000000077ddc000-0x000000007838c000) (5MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x000000007838c000-0x000000007838f000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x000000007838f000-0x0000000078394000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x0000000078394000-0x0000000078395000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x0000000078395000-0x000000007853e000) (1MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x000000007853e000-0x0000000078542000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x0000000078542000-0x000000007856c000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x000000007856c000-0x000000007856e000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x000000007856e000-0x000000007856f000) (0MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x000000007856f000-0x0000000078571000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x0000000078571000-0x00000000785b7000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000785b7000-0x00000000785bb000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000785bb000-0x0000000079fcf000) (26MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000079fcf000-0x000000007fcaa000) (92MB)
[ 0.000000] efi: mem44: type=2, attr=0xf, range=[0x000000007fcaa000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x0000000080000000-0x0000000082209000) (34MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x0000000082209000-0x0000000082219000) (0MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x0000000082219000-0x0000000092219000) (256MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000092219000-0x000000009269f000) (4MB)
[ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x000000009269f000-0x000000009289f000) (2MB)
[ 0.000000] efi: mem50: type=6, attr=0x800000000000000f, range=[0x000000009289f000-0x0000000092aaf000) (2MB)
[ 0.000000] efi: mem51: type=0, attr=0xf, range=[0x0000000092aaf000-0x0000000092eaf000) (4MB)
[ 0.000000] efi: mem52: type=10, attr=0xf, range=[0x0000000092eaf000-0x0000000092faf000) (1MB)
[ 0.000000] efi: mem53: type=9, attr=0xf, range=[0x0000000092faf000-0x0000000092fff000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x0000000092fff000-0x0000000093000000) (0MB)
[ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000015f600000) (1526MB)
[ 0.000000] efi: mem56: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem57: type=0, attr=0x0, range=[0x0000000093000000-0x000000009fa00000) (202MB)
[ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem59: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem63: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem65: type=11, attr=0x8000000000000001, range=[0x00000000ffb00000-0x0000000100000000) (5MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Split 13 x2 PC/215B, BIOS F.23 10/07/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0093000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 0094000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 0098000000 mask 7FF8000000 uncachable
[ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x93000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x93000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000028000] 28000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
[ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
[ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9269efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x925fffff] page 2M
[ 0.000000] [mem 0x92600000-0x9269efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x92fff000-0x92ffffff]
[ 0.000000] [mem 0x92fff000-0x92ffffff] page 4k
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7fcaa000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000092FFE014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x0000000092FFE210 0000AC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 0x0000000092FF8000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 0x0000000092FE4000 010EA6 (v01 HPQOEM 215B 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000092FAA000 000040
[ 0.000000] ACPI: UEFI 0x0000000092FFD000 000236 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 0x0000000092FFB000 000044 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 0x0000000092FFA000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 0x0000000092FF9000 0000A5 (v32 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 0x0000000092FF7000 000038 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 0x0000000092FF6000 00008C (v03 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 0x0000000092FF5000 00003C (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FE2000 0010BF (v01 HPQOEM 215B 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x0000000092FE0000 000028 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: LPIT 0x0000000092FDF000 00005C (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: ASPT 0x0000000092FDD000 000034 (v07 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 0x0000000092FDC000 000034 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FDB000 000452 (v01 HPQOEM 215B 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FDA000 000AD8 (v01 HPQOEM 215B 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD7000 002A63 (v01 HPQOEM 215B 00003000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x0000000092FD6000 000038 (v01 HPQOEM 215B 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15f5fffff]
[ 0.000000] NODE_DATA [mem 0x15f5fa000-0x15f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ae00000-ffff88015ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x9269efff]
[ 0.000000] node 0: [mem 0x92fff000-0x92ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
[ 0.000000] On node 0 totalpages: 990246
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 110 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9307 pages used for memmap
[ 0.000000] DMA32 zone: 595616 pages, LIFO batch:31
[ 0.000000] Normal zone: 6104 pages used for memmap
[ 0.000000] Normal zone: 390656 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x70eaf000-0x70eaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x70ebf000-0x70ebffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9269f000-0x92eaefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x92eaf000-0x92faefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x92faf000-0x92ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88015f200000 s86848 r8192 d23744 u262144
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 974661
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda6 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3748312K/3960984K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 212672K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1296.995 MHz processor
[ 0.000093] Calibrating delay loop (skipped), value calculated using timer frequency.. 2595.07 BogoMIPS (lpj=4323316)
[ 0.000101] pid_max: default: 32768 minimum: 301
[ 0.000121] ACPI: Core revision 20140724
[ 0.039971] ACPI: All ACPI Tables successfully acquired
[ 0.093840] Security Framework initialized
[ 0.093857] Yama: becoming mindful.
[ 0.094663] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.097261] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.098365] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.098381] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.098973] Initializing cgroup subsys memory
[ 0.098988] Initializing cgroup subsys devices
[ 0.098994] Initializing cgroup subsys freezer
[ 0.099000] Initializing cgroup subsys net_cls
[ 0.099005] Initializing cgroup subsys blkio
[ 0.099062] CPU: Physical Processor ID: 0
[ 0.099065] CPU: Processor Core ID: 0
[ 0.099078] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.101530] mce: CPU supports 7 MCE banks
[ 0.101566] CPU0: Thermal monitoring enabled (TM1)
[ 0.101597] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.101869] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[ 0.110008] ftrace: allocating 20674 entries in 81 pages
[ 0.136776] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.169811] smpboot: CPU0: Intel(R) Core(TM) i3-4010Y CPU @ 1.30GHz (fam: 06, model: 45, stepping: 01)
[ 0.169829] TSC deadline timer enabled
[ 0.169892] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.169951] ... version: 3
[ 0.169954] ... bit width: 48
[ 0.169956] ... generic registers: 4
[ 0.169960] ... value mask: 0000ffffffffffff
[ 0.169962] ... max period: 0000ffffffffffff
[ 0.169965] ... fixed-purpose events: 3
[ 0.169968] ... event mask: 000000070000000f
[ 0.190065] x86: Booting SMP configuration:
[ 0.190071] .... node #0, CPUs: #1
[ 0.206679] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.213438] #2
[ 0.228072] CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.233464] #3
[ 0.249376] x86: Booted up 1 node, 4 CPUs
[ 0.249383] smpboot: Total of 4 processors activated (10380.29 BogoMIPS)
[ 0.260214] devtmpfs: initialized
[ 0.266296] PM: Registering ACPI NVS region [mem 0x92eaf000-0x92faefff] (1048576 bytes)
[ 0.268698] pinctrl core: initialized pinctrl subsystem
[ 0.268800] RTC time: 7:04:06, date: 10/24/14
[ 0.269058] NET: Registered protocol family 16
[ 0.269368] cpuidle: using governor ladder
[ 0.269376] cpuidle: using governor menu
[ 0.269488] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.269492] ACPI: bus type PCI registered
[ 0.269496] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.269705] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.269711] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.270648] PCI: Using configuration type 1 for base access
[ 0.284067] ACPI: Added _OSI(Module Device)
[ 0.284074] ACPI: Added _OSI(Processor Device)
[ 0.284078] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.284081] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.294232] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.309239] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.323513] ACPI: Dynamic OEM Table Load:
[ 0.323541] ACPI: SSDT 0xFFFF880158CD8C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816)
[ 0.337265] ACPI: Dynamic OEM Table Load:
[ 0.337291] ACPI: SSDT 0xFFFF880158EE8000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816)
[ 0.353601] ACPI: Dynamic OEM Table Load:
[ 0.353627] ACPI: SSDT 0xFFFF880158E8A400 000119 (v01 PmRef ApCst 00003000 INTL 20120816)
[ 0.384659] ACPI: Interpreter enabled
[ 0.384690] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.384711] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.384776] ACPI: (supports S0 S3 S4 S5)
[ 0.384781] ACPI: Using IOAPIC for interrupt routing
[ 0.384871] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388127] acpi HPQC0003:00: ACPI dock station (docks/bays count: 1)
[ 0.403375] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.403390] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.403615] \_SB_.PCI0:_OSC invalid UUID
[ 0.403619] _OSC request data:1 1f 0
[ 0.403630] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.405567] PCI host bridge to bus 0000:00
[ 0.405576] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.405581] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.405586] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.405591] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.405595] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.405617] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.405994] pci 0000:00:02.0: [8086:0a1e] type 00 class 0x030000
[ 0.406028] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[ 0.406048] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.406061] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.406435] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.406462] pci 0000:00:03.0: reg 0x10: [mem 0xb0510000-0xb0513fff 64bit]
[ 0.406932] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.406997] pci 0000:00:14.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit]
[ 0.407203] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.407440] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.407556] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.407622] pci 0000:00:16.0: reg 0x10: [mem 0xb0518000-0xb051801f 64bit]
[ 0.407837] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.408211] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.408263] pci 0000:00:1b.0: reg 0x10: [mem 0xb0514000-0xb0517fff 64bit]
[ 0.408500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.408841] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.409091] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.409337] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.409450] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.409699] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.409944] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.410080] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.410151] pci 0000:00:1d.0: reg 0x10: [mem 0xb051c000-0xb051c3ff]
[ 0.410418] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.410693] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.410806] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.411396] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.411452] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.411478] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.411503] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.411526] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.411551] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.411577] pci 0000:00:1f.2: reg 0x24: [mem 0xb051b000-0xb051b7ff]
[ 0.411712] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.412030] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.412078] pci 0000:00:1f.3: reg 0x10: [mem 0xb0519000-0xb05190ff 64bit]
[ 0.412145] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 0.412665] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.416166] pci 0000:02:00.0: [1814:3290] type 00 class 0x028000
[ 0.417837] pci 0000:02:00.0: reg 0x10: [mem 0xb0410000-0xb041ffff]
[ 0.419662] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.423112] pci 0000:02:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.426422] pci 0000:02:00.1: reg 0x10: [mem 0xb0400000-0xb040ffff]
[ 0.429884] pci 0000:02:00.1: supports D1
[ 0.429889] pci 0000:02:00.1: PME# supported from D0 D1 D3hot
[ 0.443166] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.443178] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff]
[ 0.444673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.444807] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.444925] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.445039] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.445150] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.445264] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.445377] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.445490] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.445921] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.446060] ACPI : EC: GPE = 0x8, I/O: command/status = 0x66, data = 0x62
[ 0.446345] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.446350] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.446358] vgaarb: loaded
[ 0.446361] vgaarb: bridge control possible 0000:00:02.0
[ 0.446605] PCI: Using ACPI for IRQ routing
[ 0.456737] PCI: pci_cache_line_size set to 64 bytes
[ 0.456805] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.456809] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.456813] e820: reserve RAM buffer [mem 0x70eaf018-0x73ffffff]
[ 0.456816] e820: reserve RAM buffer [mem 0x9269f000-0x93ffffff]
[ 0.456821] e820: reserve RAM buffer [mem 0x93000000-0x93ffffff]
[ 0.456825] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[ 0.457100] NetLabel: Initializing
[ 0.457103] NetLabel: domain hash size = 128
[ 0.457106] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.457139] NetLabel: unlabeled traffic allowed by default
[ 0.457194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.457209] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.459274] Switched to clocksource hpet
[ 0.472929] pnp: PnP ACPI init
[ 0.474219] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.474227] system 00:00: [io 0xffff] has been reserved
[ 0.474232] system 00:00: [io 0xffff] has been reserved
[ 0.474237] system 00:00: [io 0xffff] has been reserved
[ 0.474243] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.474248] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.474253] system 00:00: [io 0x0454-0x0457] has been reserved
[ 0.474258] system 00:00: [io 0x0380-0x0387] has been reserved
[ 0.474268] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.474386] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.474462] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.475136] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.475143] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.475148] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.475153] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.475158] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.475163] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.475168] system 00:03: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.475174] system 00:03: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.475179] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.475185] system 00:03: [mem 0x9fa22000-0x9fa22fff] has been reserved
[ 0.475190] system 00:03: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.475196] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.475726] pnp 00:04: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active)
[ 0.475937] pnp: PnP ACPI: found 5 devices
[ 0.484895] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.484905] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.484911] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.484934] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.484939] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.484944] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.484957] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
[ 0.484970] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.484978] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.484984] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.484990] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.485000] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff]
[ 0.485009] pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.485020] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.485030] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff]
[ 0.485046] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.485051] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.485056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.485060] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.485066] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.485070] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fcfffff]
[ 0.485074] pci_bus 0000:01: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.485080] pci_bus 0000:02: resource 1 [mem 0xb0400000-0xb04fffff]
[ 0.485158] NET: Registered protocol family 2
[ 0.485648] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.485865] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.486253] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.486299] TCP: reno registered
[ 0.486319] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.486381] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.486530] NET: Registered protocol family 1
[ 0.486567] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.499562] PCI: CLS 64 bytes, default 64
[ 0.499669] Unpacking initramfs...
[ 0.649024] Freeing initrd memory: 3416K (ffff88007fcaa000 - ffff880080000000)
[ 0.649044] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.649051] software IO TLB [mem 0x8e219000-0x92219000] (64MB) mapped at [ffff88008e219000-ffff880092218fff]
[ 0.649134] Simple Boot Flag at 0x44 set to 0x1
[ 0.649594] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.649712] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 0.649728] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 0.649749] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 0.649768] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 0.649884] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.649952] Scanning for low memory corruption every 60 seconds
[ 0.650697] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.650782] Initialise system trusted keyring
[ 0.651669] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.655384] zpool: loaded
[ 0.655393] zbud: loaded
[ 0.655893] VFS: Disk quotas dquot_6.5.2
[ 0.655996] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.656341] msgmni has been set to 7458
[ 0.656501] Key type big_key registered
[ 0.656855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.656946] io scheduler noop registered
[ 0.656956] io scheduler deadline registered
[ 0.657036] io scheduler cfq registered (default)
[ 0.657826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.657867] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.657963] efifb: probing for efifb
[ 0.658004] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010800000, using 4128k, total 4128k
[ 0.658008] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.658011] efifb: scrolling: redraw
[ 0.658015] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.666393] Console: switching to colour frame buffer device 170x48
[ 0.674486] fb0: EFI VGA frame buffer device
[ 0.674511] intel_idle: MWAIT substates: 0x11142120
[ 0.674515] intel_idle: v0.4 model 0x45
[ 0.674518] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.675181] GHES: HEST is not enabled!
[ 0.675382] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.676419] Linux agpgart interface v0.103
[ 0.676571] rtc_cmos 00:01: RTC can wake from S4
[ 0.676800] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.676844] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.676874] Intel P-state driver initializing.
[ 0.677112] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.677437] TCP: cubic registered
[ 0.677735] NET: Registered protocol family 10
[ 0.678411] NET: Registered protocol family 17
[ 0.679218] Loading compiled-in X.509 certificates
[ 0.679258] registered taskstats version 1
[ 0.680405] Magic number: 2:83:67
[ 0.680575] rtc_cmos 00:01: setting system clock to 2014-10-24 07:04:07 UTC (1414134247)
[ 0.680809] PM: Hibernation image not present or could not be loaded.
[ 0.683366] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[ 0.683370] Write protecting the kernel read-only data: 8192k
[ 0.689484] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
[ 0.691814] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 0.704282] random: systemd-tmpfile urandom read with 5 bits of entropy available
[ 0.706172] systemd-udevd[57]: starting version 216
[ 0.726322] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.726328] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.728588] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.732754] ACPI: bus type USB registered
[ 0.732823] usbcore: registered new interface driver usbfs
[ 0.732847] usbcore: registered new interface driver hub
[ 0.733123] usbcore: registered new device driver usb
[ 0.733995] SCSI subsystem initialized
[ 0.734348] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.734673] ehci-pci: EHCI PCI platform driver
[ 0.734943] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.734959] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.734979] ehci-pci 0000:00:1d.0: debug port 2
[ 0.737131] libata version 3.00 loaded.
[ 0.738884] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.738915] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb051c000
[ 0.746148] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.746520] hub 1-0:1.0: USB hub found
[ 0.746539] hub 1-0:1.0: 2 ports detected
[ 0.747228] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.747238] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.747328] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.747351] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
[ 0.747702] hub 2-0:1.0: USB hub found
[ 0.747726] hub 2-0:1.0: 9 ports detected
[ 0.749655] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.749666] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.750213] hub 3-0:1.0: USB hub found
[ 0.750342] hub 3-0:1.0: 4 ports detected
[ 0.750863] ahci 0000:00:1f.2: version 3.0
[ 0.751113] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.751162] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.751167] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
[ 0.752116] scsi host0: ahci
[ 0.752300] scsi host1: ahci
[ 0.752463] scsi host2: ahci
[ 0.752623] scsi host3: ahci
[ 0.752719] ata1: SATA max UDMA/133 abar m2048@0xb051b000 port 0xb051b100 irq 41
[ 0.752724] ata2: SATA max UDMA/133 abar m2048@0xb051b000 port 0xb051b180 irq 41
[ 0.752727] ata3: DUMMY
[ 0.752730] ata4: DUMMY
[ 0.757365] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.053134] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.069773] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.071009] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.071018] ata1.00: ATA-9: SAMSUNG MZMTD128HAFV-000H1, DXT41H0Q, max UDMA/133
[ 1.071023] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.071642] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.071770] ata1.00: configured for UDMA/133
[ 1.072152] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD128 1H0Q PQ: 0 ANSI: 5
[ 1.073048] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.078560] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.078694] sd 0:0:0:0: [sda] Write Protect is off
[ 1.078700] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.078734] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.080795] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.081841] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.177544] hub 1-1:1.0: USB hub found
[ 1.177670] hub 1-1:1.0: 8 ports detected
[ 1.340064] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 1.396999] systemd[1]: RTC configured in localtime, applying delta of -360 minutes to system time.
[ 1.488568] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 1.488899] systemd[1]: Detected architecture 'x86-64'.
[ 1.490760] systemd[1]: Set hostname to <arch>.
[ 1.631505] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.631634] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.631649] systemd[1]: Starting Login Prompts.
[ 1.631769] systemd[1]: Reached target Login Prompts.
[ 1.631782] systemd[1]: Starting Remote File Systems.
[ 1.631872] systemd[1]: Reached target Remote File Systems.
[ 1.631897] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.631937] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.631948] systemd[1]: Starting Paths.
[ 1.632030] systemd[1]: Reached target Paths.
[ 1.632042] systemd[1]: Starting Encrypted Volumes.
[ 1.632126] systemd[1]: Reached target Encrypted Volumes.
[ 1.632151] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.632355] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.632372] systemd[1]: Starting Swap.
[ 1.632449] systemd[1]: Reached target Swap.
[ 1.632460] systemd[1]: Starting EFI System Partition Automount.
[ 1.632610] systemd[1]: Set up automount EFI System Partition Automount.
[ 1.632626] systemd[1]: Expecting device dev-disk-by\x2duuid-FED3\x2d8397.device...
[ 1.632716] systemd[1]: Starting Root Slice.
[ 1.638864] systemd[1]: Created slice Root Slice.
[ 1.638880] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.639014] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.639028] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.639136] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.639148] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.639258] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.639270] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.639384] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.639401] systemd[1]: Starting udev Kernel Socket.
[ 1.639499] systemd[1]: Listening on udev Kernel Socket.
[ 1.639514] systemd[1]: Starting udev Control Socket.
[ 1.639614] systemd[1]: Listening on udev Control Socket.
[ 1.639627] systemd[1]: Starting User and Session Slice.
[ 1.639900] systemd[1]: Created slice User and Session Slice.
[ 1.639914] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.640045] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.640061] systemd[1]: Starting Journal Socket.
[ 1.640172] systemd[1]: Listening on Journal Socket.
[ 1.640193] systemd[1]: Starting System Slice.
[ 1.640451] systemd[1]: Created slice System Slice.
[ 1.640468] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.640743] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.640759] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.642735] systemd[1]: Started Load Kernel Modules.
[ 1.644186] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.645002] systemd[1]: Starting udev Coldplug all Devices...
[ 1.647297] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.647326] systemd[1]: Starting Setup Virtual Console...
[ 1.648020] systemd[1]: Mounting Huge Pages File System...
[ 1.649127] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.650023] tsc: Refined TSC clocksource calibration: 1296.997 MHz
[ 1.650082] systemd[1]: Mounting Configuration File System...
[ 1.650921] systemd[1]: Mounting Debug File System...
[ 1.651762] systemd[1]: Mounted FUSE Control File System.
[ 1.651817] systemd[1]: Starting system-getty.slice.
[ 1.652333] systemd[1]: Created slice system-getty.slice.
[ 1.652379] systemd[1]: Starting Apply Kernel Variables...
[ 1.653047] systemd[1]: Starting Journal Service...
[ 1.655378] systemd[1]: Started Journal Service.
[ 1.706891] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 1.989034] systemd-udevd[156]: starting version 216
[ 2.050317] usb 2-5: new full-speed USB device number 4 using xhci_hcd
[ 2.249287] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.251537] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.252239] ACPI: Lid Switch [LID0]
[ 2.252373] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.252382] ACPI: Power Button [PWRB]
[ 2.252517] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.252523] ACPI: Power Button [PWRF]
[ 2.257840] ACPI: AC Adapter [ACAD] (off-line)
[ 2.259699] Initializing HPQ6001 module
[ 2.260686] input: HP Wireless hotkeys as /devices/virtual/input/input4
[ 2.272414] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 2.288667] [Firmware Bug]: Invalid critical threshold (0)
[ 2.292305] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.292312] ACPI: Thermal Zone [TZ01] (29 C)
[ 2.295284] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 2.295298] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.298816] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc1
[ 2.300745] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 2.307673] [drm] Initialized drm 1.1.0 20060810
[ 2.308590] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.312854] ACPI: Battery Slot [BAT0] (battery present)
[ 2.334721] sound hdaudioC1D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 2.334730] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.334735] sound hdaudioC1D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 2.334738] sound hdaudioC1D0: mono: mono_out=0x0
[ 2.334741] sound hdaudioC1D0: inputs:
[ 2.334746] sound hdaudioC1D0: Internal Mic=0xe
[ 2.334750] sound hdaudioC1D0: Mic=0xb
[ 2.343639] AVX2 version of gcm_enc/dec engaged.
[ 2.346073] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input6
[ 2.346417] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 2.346548] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 2.347670] [drm] Memory usable by graphics device = 2048M
[ 2.347675] [drm] Replacing VGA console driver
[ 2.347682] checking generic (a0000000 408000) vs hw (a0000000 10000000)
[ 2.347685] fb: switching to inteldrmfb from EFI VGA
[ 2.347718] Console: switching to colour dummy device 80x25
[ 2.370388] ACPI: Battery Slot [BAT1] (battery present)
[ 2.371570] wmi: Mapper loaded
[ 2.376417] cfg80211: Calling CRDA to update world regulatory domain
[ 2.377640] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.377659] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.377662] [drm] Driver supports precise vblank timestamp query.
[ 2.377706] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.383911] usb 2-6: new full-speed USB device number 5 using xhci_hcd
[ 2.397539] iTCO_vendor_support: vendor-support=0
[ 2.410921] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.410973] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 2.411151] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.426321] kvm: disabled by bios
[ 2.437514] [drm] VBT doesn't support DRRS
[ 2.439440] kvm: disabled by bios
[ 2.440843] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 2.447108] intel_rapl: Found RAPL domain package
[ 2.447116] intel_rapl: Found RAPL domain core
[ 2.447121] intel_rapl: Found RAPL domain uncore
[ 2.447126] intel_rapl: Found RAPL domain dram
[ 2.462944] kvm: disabled by bios
[ 2.463133] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[ 2.471845] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 2.480439] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.482758] fbcon: inteldrmfb (fb0) is primary device
[ 2.484682] rt2800pci 0000:02:00.0 wlo1: renamed from wlan0
[ 2.502573] systemd-udevd[160]: renamed network interface wlan0 to wlo1
[ 2.519239] Non-volatile memory driver v1.3
[ 2.650946] Switched to clocksource tsc
[ 2.717370] usb 2-8: new full-speed USB device number 6 using xhci_hcd
[ 3.554547] Console: switching to colour frame buffer device 170x48
[ 3.562573] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.562578] i915 0000:00:02.0: registered panic notifier
[ 3.583777] systemd-journald[137]: Received request to flush runtime journal from PID 1
[ 3.585481] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.585631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 3.585766] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 3.591250] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X
[ 3.707251] random: nonblocking pool is initialized
[ 3.715655] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 3.715944] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 3.718182] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 3.751363] ahci 0000:00:1f.2: port does not support device sleep
[ 4.190043] zram: Created 4 device(s) ...
[ 4.190551] zram0: detected capacity change from 0 to 195629056
[ 4.224561] zram1: detected capacity change from 0 to 195629056
[ 4.234640] zram2: detected capacity change from 0 to 195629056
[ 4.244540] zram3: detected capacity change from 0 to 195629056
[ 4.277387] Adding 191040k swap on /dev/zram0. Priority:100 extents:1 across:191040k SSFS
[ 4.277684] Adding 191040k swap on /dev/zram1. Priority:100 extents:1 across:191040k SSFS
[ 4.277937] Adding 191040k swap on /dev/zram2. Priority:100 extents:1 across:191040k SSFS
[ 4.278128] Adding 191040k swap on /dev/zram3. Priority:100 extents:1 across:191040k SSFS
[ 4.526229] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 4.528638] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 4.635398] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 5.816582] wlo1: authenticate with f8:8e:85:b1:4c:a7
[ 5.822688] wlo1: direct probe to f8:8e:85:b1:4c:a7 (try 1/3)
[ 6.026041] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 2/3)
[ 6.027550] wlo1: authenticated
[ 6.027825] rt2800pci 0000:02:00.0 wlo1: disabling HT/VHT due to WEP/TKIP use
[ 6.029388] wlo1: associate with f8:8e:85:b1:4c:a7 (try 1/3)
[ 6.032814] wlo1: RX AssocResp from f8:8e:85:b1:4c:a7 (capab=0x411 status=0 aid=3)
[ 6.032921] wlo1: associated
[ 6.032965] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 6.642440] IPv6: wlo1: IPv6 duplicate address fe80::8256:f2ff:fe28:616d detected!
[ 7.895266] usb 2-8: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 8.514062] fuse init (API version 7.23)
[ 8.952128] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.973685] usbcore: registered new interface driver usbhid
[ 8.973692] usbhid: USB HID core driver
[ 8.978093] input: Synaptics Touch Pad V 103S as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/0003:06CB:5710.0002/input/input14
[ 8.978346] hid-generic 0003:06CB:5710.0002: input,hiddev0,hidraw0: USB HID v1.11 Pointer [Synaptics Touch Pad V 103S ] on usb-0000:00:14.0-6/input0
[ 8.983875] mousedev: PS/2 mouse device common for all mice
[ 8.985670] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:04F3:0117.0003/input/input15
[ 8.987067] hid-multitouch 0003:04F3:0117.0003: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-8/input0
[ 8.995126] media: Linux media interface: v0.10
[ 9.009942] Linux video capture interface: v2.00
[ 9.043371] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 9.043482] scsi host4: usb-storage 2-4:1.0
[ 9.043700] usbcore: registered new interface driver usb-storage
[ 9.049077] usbcore: registered new interface driver uas
[ 9.078605] Bluetooth: Core ver 2.19
[ 9.078728] NET: Registered protocol family 31
[ 9.078733] Bluetooth: HCI device and connection manager initialized
[ 9.078744] Bluetooth: HCI socket layer initialized
[ 9.078749] Bluetooth: L2CAP socket layer initialized
[ 9.078762] Bluetooth: SCO socket layer initialized
[ 9.086763] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.086769] Bluetooth: BNEP filters: protocol multicast
[ 9.086781] Bluetooth: BNEP socket layer initialized
[ 9.105154] uvcvideo: Found UVC 1.00 device HP TrueVision Full HD (0bda:5742)
[ 9.109804] input: HP TrueVision Full HD as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input17
[ 9.110054] usbcore: registered new interface driver uvcvideo
[ 9.110058] USB Video Class driver (1.1.1)
[ 10.047188] scsi 4:0:0:0: Direct-Access Generic- SD/MMC/MS PRO 1.00 PQ: 0 ANSI: 4
[ 10.735202] sd 4:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[ 10.735526] sd 4:0:0:0: [sdb] Write Protect is off
[ 10.735534] sd 4:0:0:0: [sdb] Mode Sense: 2f 00 00 00
[ 10.735867] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 10.740259] sdb: sdb1 sdb2
[ 10.741636] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 15.067002] systemd-journald[137]: File /var/log/journal/c074ddfe1e034c63ba32f9b452472afe/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 18.173474] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 18.181547] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 31.264942] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 161.668287] cfg80211: Calling CRDA to update world regulatory domain
[ 162.806526] wlo1: authenticate with f8:8e:85:b1:4c:a7
[ 162.819003] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 1/3)
[ 162.820425] wlo1: authenticated
[ 162.820734] rt2800pci 0000:02:00.0 wlo1: disabling HT/VHT due to WEP/TKIP use
[ 162.822157] wlo1: associate with f8:8e:85:b1:4c:a7 (try 1/3)
[ 162.825114] wlo1: RX AssocResp from f8:8e:85:b1:4c:a7 (capab=0x411 status=0 aid=3)
[ 162.825298] wlo1: associated
[ 221.024477] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 227.682025] cfg80211: Calling CRDA to update world regulatory domain
[ 228.800429] wlo1: authenticate with f8:8e:85:b1:4c:a7
[ 228.812714] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 1/3)
[ 228.817565] wlo1: authenticated
[ 228.817963] rt2800pci 0000:02:00.0 wlo1: disabling HT/VHT due to WEP/TKIP use
[ 228.819256] wlo1: associate with f8:8e:85:b1:4c:a7 (try 1/3)
[ 228.828368] wlo1: RX AssocResp from f8:8e:85:b1:4c:a7 (capab=0x411 status=0 aid=3)
[ 228.828555] wlo1: associated
[ 264.677126] cfg80211: Calling CRDA to update world regulatory domain
[ 271.913937] wlo1: authenticate with f8:8e:85:b1:4c:a7
[ 271.925811] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 1/3)
[ 271.974553] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 2/3)
[ 271.976170] wlo1: authenticated
[ 271.976499] rt2800pci 0000:02:00.0 wlo1: disabling HT/VHT due to WEP/TKIP use
[ 271.979006] wlo1: associate with f8:8e:85:b1:4c:a7 (try 1/3)
[ 271.993917] wlo1: RX AssocResp from f8:8e:85:b1:4c:a7 (capab=0x411 status=0 aid=3)
[ 271.994112] wlo1: associated
[ 308.758338] cfg80211: Calling CRDA to update world regulatory domain
[ 309.883272] wlo1: authenticate with f8:8e:85:b1:4c:a7
[ 309.895703] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 1/3)
[ 309.954381] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 2/3)
[ 310.016925] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 3/3)
[ 310.044074] wlo1: authentication with f8:8e:85:b1:4c:a7 timed out
[ 311.654812] wlo1: authenticate with f8:8e:85:b1:4c:a7
[ 311.666819] wlo1: direct probe to f8:8e:85:b1:4c:a7 (try 1/3)
[ 311.870075] wlo1: direct probe to f8:8e:85:b1:4c:a7 (try 2/3)
[ 312.073544] wlo1: direct probe to f8:8e:85:b1:4c:a7 (try 3/3)
[ 312.276998] wlo1: authentication with f8:8e:85:b1:4c:a7 timed out
[ 320.476609] wlo1: authenticate with f8:8e:85:b1:4c:a7
[ 320.488883] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 1/3)
[ 320.490398] wlo1: authenticated
[ 320.490762] rt2800pci 0000:02:00.0 wlo1: disabling HT/VHT due to WEP/TKIP use
[ 320.492063] wlo1: associate with f8:8e:85:b1:4c:a7 (try 1/3)
[ 320.495453] wlo1: RX AssocResp from f8:8e:85:b1:4c:a7 (capab=0x411 status=0 aid=3)
[ 320.496153] wlo1: associated
[ 921.076366] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 921.496637] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 921.916855] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 922.337157] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 922.757499] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 923.177746] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 923.598017] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 924.018257] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 924.711945] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 925.132267] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 925.925999] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 1093.698972] usb 2-4: USB disconnect, device number 3
[ 1118.672843] usb 2-6: USB disconnect, device number 5
[ 1124.026414] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1177.149904] usb 2-6: new full-speed USB device number 7 using xhci_hcd
[ 1177.327208] input: Synaptics Touch Pad V 103S as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/0003:06CB:5710.0004/input/input18
[ 1177.327763] hid-generic 0003:06CB:5710.0004: input,hiddev0,hidraw0: USB HID v1.11 Pointer [Synaptics Touch Pad V 103S ] on usb-0000:00:14.0-6/input0
[ 1177.607278] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1283.758515] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 1284.502325] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 1284.972514] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 1644.576044] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 1645.046343] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2362.232157] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2363.472980] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2365.634268] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2482.579247] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2483.272952] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2483.693260] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2484.660519] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2485.080717] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2485.501036] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2485.971289] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2602.926270] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2603.346432] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 2697.967800] wlo1: deauthenticating from f8:8e:85:b1:4c:a7 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2697.987954] cfg80211: Calling CRDA to update world regulatory domain
[ 2698.060306] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 2698.808991] PM: Syncing filesystems ... done.
[ 2698.853439] PM: Preparing system for mem sleep
[ 2698.853684] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2698.855660] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2698.856924] PM: Entering mem sleep
[ 2698.856964] Suspending console(s) (use no_console_suspend to debug)
[ 2698.857693] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2698.858902] sd 0:0:0:0: [sda] Stopping disk
[ 2698.860301] i8042 kbd 00:02: System wakeup enabled by ACPI
[ 2699.145280] PM: suspend of devices complete after 287.837 msecs
[ 2699.158673] PM: late suspend of devices complete after 13.361 msecs
[ 2699.159625] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2699.159754] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2699.171818] PM: noirq suspend of devices complete after 13.131 msecs
[ 2699.172556] ACPI: Preparing to enter system sleep state S3
[ 2699.174138] PM: Saving platform NVS memory
[ 2699.174149] Disabling non-boot CPUs ...
[ 2699.174210] intel_pstate CPU 1 exiting
[ 2699.175670] smpboot: CPU 1 is now offline
[ 2699.176492] intel_pstate CPU 2 exiting
[ 2699.278496] smpboot: CPU 2 is now offline
[ 2699.279191] intel_pstate CPU 3 exiting
[ 2699.381891] smpboot: CPU 3 is now offline
[ 2699.385949] ACPI: Low-level resume complete
[ 2699.386074] PM: Restoring platform NVS memory
[ 2699.386626] Enabling non-boot CPUs ...
[ 2699.386705] x86: Booting SMP configuration:
[ 2699.386708] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2699.403876] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 2699.408627] CPU1 is up
[ 2699.408662] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2699.421121] CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[ 2699.425212] CPU2 is up
[ 2699.425251] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2699.440624] CPU3 is up
[ 2699.446357] ACPI: Waking up from system sleep state S3
[ 2699.562887] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2699.563059] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2699.566098] PM: noirq resume of devices complete after 13.653 msecs
[ 2699.566892] PM: early resume of devices complete after 0.750 msecs
[ 2699.567043] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 2699.567350] snd_hda_intel 0000:00:03.0: irq 43 for MSI/MSI-X
[ 2699.567669] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 2699.569805] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 2699.569860] i8042 kbd 00:02: System wakeup disabled by ACPI
[ 2699.572763] sd 0:0:0:0: [sda] Starting disk
[ 2699.889530] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2699.889548] ata2: SATA link down (SStatus 0 SControl 300)
[ 2699.890569] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2699.944970] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2699.945085] ata1.00: configured for UDMA/133
[ 2699.956232] ahci 0000:00:1f.2: port does not support device sleep
[ 2699.983163] usb 2-8: reset full-speed USB device number 6 using xhci_hcd
[ 2699.983297] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
[ 2699.983300] usb 2-8: hub failed to enable device, error -22
[ 2700.143150] usb 2-8: reset full-speed USB device number 6 using xhci_hcd
[ 2700.143285] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
[ 2700.143289] usb 2-8: hub failed to enable device, error -22
[ 2700.303247] usb 2-8: reset full-speed USB device number 6 using xhci_hcd
[ 2700.317572] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079dd3d80
[ 2700.317574] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079dd3dc8
[ 2700.317582] usb 2-8: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2700.476742] usb 2-6: reset full-speed USB device number 7 using xhci_hcd
[ 2700.476753] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6.
[ 2700.476755] usb 2-6: hub failed to enable device, error -22
[ 2700.636671] usb 2-6: reset full-speed USB device number 7 using xhci_hcd
[ 2700.636696] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6.
[ 2700.636700] usb 2-6: hub failed to enable device, error -22
[ 2700.796727] usb 2-6: reset full-speed USB device number 7 using xhci_hcd
[ 2700.810406] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880156083480
[ 2700.810410] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801560834c8
[ 2700.970380] usb 2-5: reset full-speed USB device number 4 using xhci_hcd
[ 2700.970396] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[ 2700.970400] usb 2-5: hub failed to enable device, error -22
[ 2701.130441] usb 2-5: reset full-speed USB device number 4 using xhci_hcd
[ 2701.130567] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[ 2701.130571] usb 2-5: hub failed to enable device, error -22
[ 2701.290458] usb 2-5: reset full-speed USB device number 4 using xhci_hcd
[ 2701.304422] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800794b8b40
[ 2701.464175] usb 2-3: reset high-speed USB device number 2 using xhci_hcd
[ 2701.464258] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[ 2701.464263] usb 2-3: hub failed to enable device, error -22
[ 2701.624059] usb 2-3: reset high-speed USB device number 2 using xhci_hcd
[ 2701.624141] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[ 2701.624145] usb 2-3: hub failed to enable device, error -22
[ 2701.784156] usb 2-3: reset high-speed USB device number 2 using xhci_hcd
[ 2701.823018] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007943b5a0
[ 2701.827213] PM: resume of devices complete after 2258.930 msecs
[ 2701.827522] PM: Finishing wakeup.
[ 2701.827524] Restarting tasks ...
[ 2701.828791] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 2701.830963] done.
[ 2702.001064] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 2702.107565] mce: [Hardware Error]: Machine check events logged
[ 2703.185189] wlo1: authenticate with f8:8e:85:b1:4c:a7
[ 2703.191606] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 1/3)
[ 2703.192991] wlo1: authenticated
[ 2703.193141] rt2800pci 0000:02:00.0 wlo1: disabling HT/VHT due to WEP/TKIP use
[ 2703.194853] wlo1: associate with f8:8e:85:b1:4c:a7 (try 1/3)
[ 2703.198060] wlo1: RX AssocResp from f8:8e:85:b1:4c:a7 (capab=0x411 status=0 aid=2)
[ 2703.198140] wlo1: associated
[ 2703.198186] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 2703.483672] IPv6: wlo1: IPv6 duplicate address fe80::896c:e6c9:dad6:5bd8 detected!Well actually the interesting parts of dmesg are:
[ 2698.808991] PM: Syncing filesystems ... done.
[ 2698.853439] PM: Preparing system for mem sleep
[ 2698.853684] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2698.855660] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2698.856924] PM: Entering mem sleep
[ 2698.856964] Suspending console(s) (use no_console_suspend to debug)
[ 2698.857693] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2698.858902] sd 0:0:0:0: [sda] Stopping disk
[ 2698.860301] i8042 kbd 00:02: System wakeup enabled by ACPI
[ 2699.145280] PM: suspend of devices complete after 287.837 msecs
[ 2699.158673] PM: late suspend of devices complete after 13.361 msecs
[ 2699.159625] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2699.159754] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2699.171818] PM: noirq suspend of devices complete after 13.131 msecs
[ 2699.172556] ACPI: Preparing to enter system sleep state S3
[ 2699.174138] PM: Saving platform NVS memory
[ 2699.174149] Disabling non-boot CPUs ...
[ 2699.174210] intel_pstate CPU 1 exiting
[ 2699.175670] smpboot: CPU 1 is now offline
[ 2699.176492] intel_pstate CPU 2 exiting
[ 2699.278496] smpboot: CPU 2 is now offline
[ 2699.279191] intel_pstate CPU 3 exiting
[ 2699.381891] smpboot: CPU 3 is now offline
[ 2699.385949] ACPI: Low-level resume complete
[ 2699.386074] PM: Restoring platform NVS memory
[ 2699.386626] Enabling non-boot CPUs ...
[ 2699.386705] x86: Booting SMP configuration:
[ 2699.386708] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2699.403876] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 2699.408627] CPU1 is up
[ 2699.408662] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2699.421121] CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[ 2699.425212] CPU2 is up
[ 2699.425251] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2699.440624] CPU3 is up
[ 2699.446357] ACPI: Waking up from system sleep state S3
[ 2699.562887] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2699.563059] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2699.566098] PM: noirq resume of devices complete after 13.653 msecs
[ 2699.566892] PM: early resume of devices complete after 0.750 msecs
[ 2699.567043] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 2699.567350] snd_hda_intel 0000:00:03.0: irq 43 for MSI/MSI-X
[ 2699.567669] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 2699.569805] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 2699.569860] i8042 kbd 00:02: System wakeup disabled by ACPI
[ 2699.572763] sd 0:0:0:0: [sda] Starting disk
[ 2699.889530] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2699.889548] ata2: SATA link down (SStatus 0 SControl 300)
[ 2699.890569] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2699.944970] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2699.945085] ata1.00: configured for UDMA/133
[ 2699.956232] ahci 0000:00:1f.2: port does not support device sleep
[ 2699.983163] usb 2-8: reset full-speed USB device number 6 using xhci_hcd
[ 2699.983297] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
[ 2699.983300] usb 2-8: hub failed to enable device, error -22
[ 2700.143150] usb 2-8: reset full-speed USB device number 6 using xhci_hcd
[ 2700.143285] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
[ 2700.143289] usb 2-8: hub failed to enable device, error -22
[ 2700.303247] usb 2-8: reset full-speed USB device number 6 using xhci_hcd
[ 2700.317572] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079dd3d80
[ 2700.317574] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079dd3dc8
[ 2700.317582] usb 2-8: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2700.476742] usb 2-6: reset full-speed USB device number 7 using xhci_hcd
[ 2700.476753] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6.
[ 2700.476755] usb 2-6: hub failed to enable device, error -22
[ 2700.636671] usb 2-6: reset full-speed USB device number 7 using xhci_hcd
[ 2700.636696] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6.
[ 2700.636700] usb 2-6: hub failed to enable device, error -22
[ 2700.796727] usb 2-6: reset full-speed USB device number 7 using xhci_hcd
[ 2700.810406] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880156083480
[ 2700.810410] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801560834c8
[ 2700.970380] usb 2-5: reset full-speed USB device number 4 using xhci_hcd
[ 2700.970396] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[ 2700.970400] usb 2-5: hub failed to enable device, error -22
[ 2701.130441] usb 2-5: reset full-speed USB device number 4 using xhci_hcd
[ 2701.130567] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[ 2701.130571] usb 2-5: hub failed to enable device, error -22
[ 2701.290458] usb 2-5: reset full-speed USB device number 4 using xhci_hcd
[ 2701.304422] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800794b8b40
[ 2701.464175] usb 2-3: reset high-speed USB device number 2 using xhci_hcd
[ 2701.464258] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[ 2701.464263] usb 2-3: hub failed to enable device, error -22
[ 2701.624059] usb 2-3: reset high-speed USB device number 2 using xhci_hcd
[ 2701.624141] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[ 2701.624145] usb 2-3: hub failed to enable device, error -22
[ 2701.784156] usb 2-3: reset high-speed USB device number 2 using xhci_hcd
[ 2701.823018] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007943b5a0
[ 2701.827213] PM: resume of devices complete after 2258.930 msecs
[ 2701.827522] PM: Finishing wakeup.
[ 2701.827524] Restarting tasks ...
[ 2701.828791] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 2701.830963] done.
[ 2702.001064] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 2702.107565] mce: [Hardware Error]: Machine check events logged
[ 2703.185189] wlo1: authenticate with f8:8e:85:b1:4c:a7
[ 2703.191606] wlo1: send auth to f8:8e:85:b1:4c:a7 (try 1/3)
[ 2703.192991] wlo1: authenticated
[ 2703.193141] rt2800pci 0000:02:00.0 wlo1: disabling HT/VHT due to WEP/TKIP use
[ 2703.194853] wlo1: associate with f8:8e:85:b1:4c:a7 (try 1/3)
[ 2703.198060] wlo1: RX AssocResp from f8:8e:85:b1:4c:a7 (capab=0x411 status=0 aid=2)
[ 2703.198140] wlo1: associated
[ 2703.198186] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 2703.483672] IPv6: wlo1: IPv6 duplicate address fe80::896c:e6c9:dad6:5bd8 detected!Well I'm also not sure about where to search or what to try after this, so any hints will be gladly welcome 
Offline
Pages: 1