You are not logged in.

Pages: 1

#1 2014-10-26 02:49:39

ArchChan
Member
Registered: 2014-10-21
Posts: 3

Unable to get wireless to work on Arch linux.

Hey guys I'm in sort of a pickle right now.
I can't get my wireless to work I've read the wiki and It hasn't helped to much.

Here is some more links of stuff I read/tried
https://wiki.archlinux.org/index.php/broadcom_wireless
http://wireless.kernel.org/en/users/Drivers/b43/
https://bbs.archlinux.org/viewtopic.php?id=169847
http://ubuntuforums.org/showthread.php?t=1741776
http://unix.stackexchange.com/questions … alled-arch
http://whoisthj.tistory.com/114



03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)




I did at one point was able to have wireless on arch working on this computer. Then I had to format this labtop and lost everthing.   I forgot the command I did to get it to work.
When I did this It said I was connected to a network under battery right here
The only thing I kind of rembeber is having to do a systemclt command and make it so it starts up when the system boots up.
It's the exact same computer with the exact some Distro,Setup, DE. I don't know what It could be


It would also tell me if I was on a wired network now it doesn't even do that. It still allows me to connect to the internet however.


I also have gotten it to search and scan and connect wirelessly once.
I did this through
wifi-menu
I rebooted the system and I lost it I still have the profile but it says however I'm unable to connect.

Offline

#2 2014-10-26 02:55:46

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,556
Website

Re: Unable to get wireless to work on Arch linux.

Provided that you could connect 'manually' with wifi-menu, then all the hard stuff is out of the way: you have the needed driver, and everything is working.  The icon you no longer have in the taskbar was most likely nm-applet which works with network manager.  You may need to install and will definitely need to configure network manager.  See here.

EDIT: oops - I missed that when you tried to reconnect you got an error.  Perhaps there is more to this.  If there is, we'll need a lot more information.  Some of the pages you link to describe how to get diagnostic information (such as lscpi output).  That output could be useful here if setting up network manager doesn't get you back where you want to be.

Last edited by Trilby (2014-10-26 02:57:44)

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#3 2014-10-26 02:59:43

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: Unable to get wireless to work on Arch linux.

So which driver are you supposed to be using according to that page and what, exactly, did you do to try and make it work?

Don't use wifi menu, or any other tool: attempt a manual setup and connection first as that way you will work out exactly where it is failing (and be able to post informative debugging information here if it doesn't work).



Moving to NC...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#4 2014-10-26 03:08:17

ArchChan
Member
Registered: 2014-10-21
Posts: 3

Re: Unable to get wireless to work on Arch linux.

Trilby wrote:

Provided that you could connect 'manually' with wifi-menu, then all the hard stuff is out of the way: you have the needed driver, and everything is working.  The icon you no longer have in the taskbar was most likely nm-applet which works with network manager.  You may need to install and will definitely need to configure network manager.  See here.



EDIT: oops - I missed that when you tried to reconnect you got an error.  Perhaps there is more to this.  If there is, we'll need a lot more information.  Some of the pages you link to describe how to get diagnostic information (such as lscpi output).  That output could be useful here if setting up network manager doesn't get you back where you want to be.

Alright I started this up and I was able to get it working where it would say I'm connected to wired. Nothing yet about wireless.

Here are some outputs
(Not even sure if this would help)

lscpi

 lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)




dmesg

[nickchan@localhost ~]$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=73941395-4c74-4339-9cab-d7d053fd8734 rw quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000157ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP G72 Notebook PC              /1439, BIOS F.48 11/09/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x158000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FE0000000 write-back
[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
[    0.000000]   4 base 09B800000 mask FFF800000 uncachable
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 base 158000000 mask FF8000000 uncachable
[    0.000000]   7 base 160000000 mask FE0000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[    0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[    0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x157e00000-0x157ffffff]
[    0.000000]  [mem 0x157e00000-0x157ffffff] page 2M
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x154000000-0x157dfffff]
[    0.000000]  [mem 0x154000000-0x157dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x153ffffff]
[    0.000000]  [mem 0x100000000-0x153ffffff] page 2M
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x9b5fffff] page 2M
[    0.000000]  [mem 0x9b600000-0x9b63efff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
[    0.000000]  [mem 0x9b7ff000-0x9b7fffff] page 4k
[    0.000000] RAMDISK: [mem 0x379d8000-0x37ce3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000009B7FE120 000074 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009B7FC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x000000009B7ED000 00B80E (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 0x000000009B75E000 000040
[    0.000000] ACPI: ASF! 0x000000009B7FD000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 0x000000009B7FB000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0x000000009B7FA000 00008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x000000009B7F9000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 0x000000009B7EC000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 0x000000009B7E8000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 0x000000009B7E5000 000034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: WDAT 0x000000009B7E4000 000224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x000000009B7E3000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000157ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x157ffffff]
[    0.000000]   NODE_DATA [mem 0x157ff9000-0x157ffcfff]
[    0.000000]  [ffffea0000000000-ffffea00055fffff] PMD -> [ffff880153800000-ffff8801575fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x157ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x9b63efff]
[    0.000000]   node   0: [mem 0x9b7ff000-0x9b7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x157ffffff]
[    0.000000] On node 0 totalpages: 996828
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9881 pages used for memmap
[    0.000000]   DMA32 zone: 632384 pages, LIFO batch:31
[    0.000000]   Normal zone: 5632 pages used for memmap
[    0.000000]   Normal zone: 360448 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x9e000000-0x9fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880157c00000 s86848 r8192 d23744 u262144
[    0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 981230
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=73941395-4c74-4339-9cab-d7d053fd8734 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3841884K/3987312K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 145428K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:488 0
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16252928 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2400.061 MHz processor
[    0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.12 BogoMIPS (lpj=8000203)
[    0.000040] pid_max: default: 32768 minimum: 301
[    0.000048] ACPI: Core revision 20140724
[    0.012562] ACPI: All ACPI Tables successfully acquired
[    0.051256] Security Framework initialized
[    0.051265] Yama: becoming mindful.
[    0.051557] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.052609] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.053056] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.053062] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.053299] Initializing cgroup subsys memory
[    0.053306] Initializing cgroup subsys devices
[    0.053309] Initializing cgroup subsys freezer
[    0.053312] Initializing cgroup subsys net_cls
[    0.053315] Initializing cgroup subsys blkio
[    0.053337] CPU: Physical Processor ID: 0
[    0.053338] CPU: Processor Core ID: 0
[    0.053344] mce: CPU supports 9 MCE banks
[    0.053354] CPU0: Thermal monitoring handled by SMI
[    0.053364] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.053465] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[    0.054434] ftrace: allocating 20674 entries in 81 pages
[    0.066042] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.099075] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz (fam: 06, model: 25, stepping: 05)
[    0.204410] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.204429] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.204432] ... version:                3
[    0.204433] ... bit width:              48
[    0.204434] ... generic registers:      4
[    0.204435] ... value mask:             0000ffffffffffff
[    0.204436] ... max period:             000000007fffffff
[    0.204437] ... fixed-purpose events:   3
[    0.204438] ... event mask:             000000070000000f
[    0.224507] x86: Booting SMP configuration:
[    0.224509] .... node  #0, CPUs:      #1
[    0.235575] CPU1: Thermal monitoring handled by SMI
[    0.237795] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.244481]  #2
[    0.255544] CPU2: Thermal monitoring handled by SMI
[    0.257876]  #3
[    0.269040] CPU3: Thermal monitoring handled by SMI
[    0.271150] x86: Booted up 1 node, 4 CPUs
[    0.271154] smpboot: Total of 4 processors activated (19208.50 BogoMIPS)
[    0.273774] devtmpfs: initialized
[    0.276350] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
[    0.277412] pinctrl core: initialized pinctrl subsystem
[    0.277458] RTC time:  2:12:48, date: 10/26/14
[    0.277547] NET: Registered protocol family 16
[    0.277666] cpuidle: using governor ladder
[    0.277669] cpuidle: using governor menu
[    0.277699] ACPI: bus type PCI registered
[    0.277701] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.277790] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.277793] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.278065] PCI: Using configuration type 1 for base access
[    0.288218] ACPI: Added _OSI(Module Device)
[    0.288221] ACPI: Added _OSI(Processor Device)
[    0.288222] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.288223] ACPI: Added _OSI(Processor Aggregator Device)
[    0.291491] ACPI: Executed 1 blocks of module-level executable AML code
[    0.314516] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.314969] ACPI: Dynamic OEM Table Load:
[    0.314977] ACPI: SSDT 0xFFFF880151A50800 000432 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.315558] ACPI: Dynamic OEM Table Load:
[    0.315564] ACPI: SSDT 0xFFFF880151A4C000 000891 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.338122] ACPI: Dynamic OEM Table Load:
[    0.338129] ACPI: SSDT 0xFFFF880151A58C00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.347996] ACPI: Dynamic OEM Table Load:
[    0.348002] ACPI: SSDT 0xFFFF880151A06400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    1.208632] ACPI: Interpreter enabled
[    1.208644] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[    1.208651] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[    1.208674] ACPI: (supports S0 S3 S4 S5)
[    1.208676] ACPI: Using IOAPIC for interrupt routing
[    1.208719] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.253611] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    1.253618] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.253651] \_SB_.PCI0:_OSC invalid UUID
[    1.253652] _OSC request data:1 1f 0 
[    1.253656] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.254366] PCI host bridge to bus 0000:00
[    1.254370] pci_bus 0000:00: root bus resource [bus 00-7e]
[    1.254372] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.254374] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.254376] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.254377] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
[    1.254386] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    1.254404] DMAR: Disabling batched IOTLB flush on Ironlake
[    1.254476] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    1.254488] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[    1.254494] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    1.254499] pci 0000:00:02.0: reg 0x20: [io  0x3050-0x3057]
[    1.254615] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    1.254644] pci 0000:00:16.0: reg 0x10: [mem 0xb4404000-0xb440400f 64bit]
[    1.254737] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.254833] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    1.254858] pci 0000:00:1a.0: reg 0x10: [mem 0xb440a000-0xb440a3ff]
[    1.254969] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.255033] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.255089] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    1.255113] pci 0000:00:1b.0: reg 0x10: [mem 0xb4400000-0xb4403fff 64bit]
[    1.255228] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.255274] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.255319] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    1.255427] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.255471] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.255517] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    1.255621] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.255667] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    1.255720] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    1.255745] pci 0000:00:1d.0: reg 0x10: [mem 0xb4409000-0xb44093ff]
[    1.255855] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.255919] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.255965] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    1.256070] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    1.256113] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    1.256290] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    1.256317] pci 0000:00:1f.2: reg 0x10: [io  0x3048-0x304f]
[    1.256328] pci 0000:00:1f.2: reg 0x14: [io  0x305c-0x305f]
[    1.256340] pci 0000:00:1f.2: reg 0x18: [io  0x3040-0x3047]
[    1.256351] pci 0000:00:1f.2: reg 0x1c: [io  0x3058-0x305b]
[    1.256362] pci 0000:00:1f.2: reg 0x20: [io  0x3020-0x303f]
[    1.256373] pci 0000:00:1f.2: reg 0x24: [mem 0xb4408000-0xb44087ff]
[    1.256439] pci 0000:00:1f.2: PME# supported from D3hot
[    1.256514] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    1.256536] pci 0000:00:1f.3: reg 0x10: [mem 0xb4406000-0xb44060ff 64bit]
[    1.256565] pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]
[    1.257400] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    1.258009] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    1.258216] pci 0000:02:00.0: reg 0x18: [mem 0xb0410000-0xb0410fff 64bit pref]
[    1.258331] pci 0000:02:00.0: reg 0x20: [mem 0xb0400000-0xb040ffff 64bit pref]
[    1.258421] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.259013] pci 0000:02:00.0: supports D1 D2
[    1.259015] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.261318] pci 0000:02:00.0: System wakeup disabled by ACPI
[    1.261578] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.261583] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.261588] pci 0000:00:1c.0:   bridge window [mem 0xb3400000-0xb43fffff]
[    1.261595] pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[    1.261750] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
[    1.261807] pci 0000:03:00.0: reg 0x10: [mem 0xb2400000-0xb2403fff 64bit]
[    1.262084] pci 0000:03:00.0: supports D1 D2
[    1.262139] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.271843] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.271848] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    1.271853] pci 0000:00:1c.2:   bridge window [mem 0xb2400000-0xb33fffff]
[    1.271862] pci 0000:00:1c.2:   bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[    1.271948] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    1.271961] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.271963] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.271965] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.271966] pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[    1.272461] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    1.272512] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.272563] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.272613] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.272662] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.272712] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.272761] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.272811] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    1.296406] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[    1.296411] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.296415] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.296487] PCI host bridge to bus 0000:7f
[    1.296490] pci_bus 0000:7f: root bus resource [bus 7f]
[    1.296495] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[    1.296542] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[    1.296591] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[    1.296634] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[    1.296677] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[    1.296719] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[    1.296832] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.296880] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.296998] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.297001] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.297004] vgaarb: loaded
[    1.297005] vgaarb: bridge control possible 0000:00:02.0
[    1.297053] PCI: Using ACPI for IRQ routing
[    1.301891] PCI: pci_cache_line_size set to 64 bytes
[    1.301975] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    1.301977] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
[    1.301978] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
[    1.302096] NetLabel: Initializing
[    1.302097] NetLabel:  domain hash size = 128
[    1.302098] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.302113] NetLabel:  unlabeled traffic allowed by default
[    1.302148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.302153] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.304187] Switched to clocksource hpet
[    1.309628] pnp: PnP ACPI init
[    1.309804] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io  0x1000-0x1fff]
[    1.309851] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.309854] system 00:00: [io  0x0800-0x080f] has been reserved
[    1.309856] system 00:00: [io  0x0810-0x0813] has been reserved
[    1.309858] system 00:00: [io  0xffff] has been reserved
[    1.309860] system 00:00: [io  0x0400-0x047f] could not be reserved
[    1.309862] system 00:00: [io  0x0500-0x057f] has been reserved
[    1.309866] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.309903] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.309933] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.309962] pnp 00:03: Plug and Play ACPI device, IDs SYN1e2c SYN1e00 SYN0002 PNP0f13 (active)
[    1.310264] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.310266] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.310268] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.310270] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.310273] system 00:04: [mem 0xf0000000-0xf1ffffff] has been reserved
[    1.310275] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.310277] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.310279] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    1.310281] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.310283] system 00:04: [mem 0xb4500000-0xb4500fff] has been reserved
[    1.310286] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.328395] pnp: PnP ACPI: found 5 devices
[    1.335275] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    1.335314] pci 0000:02:00.0: BAR 6: assigned [mem 0xb3400000-0xb341ffff pref]
[    1.335317] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.335321] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.335327] pci 0000:00:1c.0:   bridge window [mem 0xb3400000-0xb43fffff]
[    1.335332] pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[    1.335340] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.335343] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    1.335349] pci 0000:00:1c.2:   bridge window [mem 0xb2400000-0xb33fffff]
[    1.335354] pci 0000:00:1c.2:   bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[    1.335362] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    1.335377] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.335379] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.335380] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.335382] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[    1.335385] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.335386] pci_bus 0000:02: resource 1 [mem 0xb3400000-0xb43fffff]
[    1.335388] pci_bus 0000:02: resource 2 [mem 0xb0400000-0xb13fffff 64bit pref]
[    1.335391] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    1.335392] pci_bus 0000:03: resource 1 [mem 0xb2400000-0xb33fffff]
[    1.335394] pci_bus 0000:03: resource 2 [mem 0xb1400000-0xb23fffff 64bit pref]
[    1.335396] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    1.335398] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    1.335400] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    1.335402] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
[    1.335435] NET: Registered protocol family 2
[    1.335654] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.335746] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.335856] TCP: Hash tables configured (established 32768 bind 32768)
[    1.335886] TCP: reno registered
[    1.335894] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.335913] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.335975] NET: Registered protocol family 1
[    1.335992] pci 0000:00:02.0: Video device with shadowed ROM
[    1.336650] PCI: CLS 64 bytes, default 64
[    1.336702] Unpacking initramfs...
[    1.394717] Freeing initrd memory: 3120K (ffff8800379d8000 - ffff880037ce4000)
[    1.394730] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.394732] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
[    1.394776] Simple Boot Flag at 0x44 set to 0x1
[    1.395007] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    1.395014] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    1.395021] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    1.395028] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    1.395098] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.395125] Scanning for low memory corruption every 60 seconds
[    1.395460] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.395496] Initialise system trusted keyring
[    1.395869] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.397250] zpool: loaded
[    1.397253] zbud: loaded
[    1.397442] VFS: Disk quotas dquot_6.5.2
[    1.397484] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.397645] msgmni has been set to 7509
[    1.397711] Key type big_key registered
[    1.397933] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.397996] io scheduler noop registered
[    1.398000] io scheduler deadline registered
[    1.398033] io scheduler cfq registered (default)
[    1.398460] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.398475] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.398507] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.398508] vesafb: scrolling: redraw
[    1.398510] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.398531] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90008780000, using 3072k, total 3072k
[    1.523507] Console: switching to colour frame buffer device 128x48
[    1.648366] fb0: VESA VGA frame buffer device
[    1.648386] intel_idle: MWAIT substates: 0x1120
[    1.648387] intel_idle: v0.4 model 0x25
[    1.648388] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.648593] GHES: HEST is not enabled!
[    1.648670] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.649153] Linux agpgart interface v0.103
[    1.649207] rtc_cmos 00:01: RTC can wake from S4
[    1.649355] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.649389] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.649405] ledtrig-cpu: registered to indicate activity on CPUs
[    1.649514] TCP: cubic registered
[    1.649610] NET: Registered protocol family 10
[    1.649892] NET: Registered protocol family 17
[    1.650220] Loading compiled-in X.509 certificates
[    1.650233] registered taskstats version 1
[    1.650782]   Magic number: 2:356:208
[    1.650807] vc vcsa: hash matches
[    1.650929] rtc_cmos 00:01: setting system clock to 2014-10-26 02:12:49 UTC (1414289569)
[    1.651090] PM: Hibernation image not present or could not be loaded.
[    1.652988] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[    1.652993] Write protecting the kernel read-only data: 8192k
[    1.658319] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
[    1.660564] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[    1.675111] random: systemd-tmpfile urandom read with 6 bits of entropy available
[    1.678127] systemd-udevd[58]: starting version 216
[    1.694831] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.702495] i8042: Detected active multiplexing controller, rev 1.1
[    1.705433] ACPI: bus type USB registered
[    1.705470] usbcore: registered new interface driver usbfs
[    1.705484] usbcore: registered new interface driver hub
[    1.705652] usbcore: registered new device driver usb
[    1.706380] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.706445] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.706491] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.706534] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.706545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.706576] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.706773] ehci-pci: EHCI PCI platform driver
[    1.706978] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.706985] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.707002] ehci-pci 0000:00:1a.0: debug port 2
[    1.710955] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.710978] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb440a000
[    1.714912] SCSI subsystem initialized
[    1.717883] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.718024] libata version 3.00 loaded.
[    1.718166] hub 1-0:1.0: USB hub found
[    1.718178] hub 1-0:1.0: 3 ports detected
[    1.718620] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.718629] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.718650] ehci-pci 0000:00:1d.0: debug port 2
[    1.722591] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.722612] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb4409000
[    1.731216] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.731878] hub 2-0:1.0: USB hub found
[    1.731892] hub 2-0:1.0: 3 ports detected
[    1.732721] ahci 0000:00:1f.2: version 3.0
[    1.733158] ahci 0000:00:1f.2: irq 24 for MSI/MSI-X
[    1.733292] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.733297] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst 
[    1.739040] scsi host0: ahci
[    1.739405] scsi host1: ahci
[    1.739678] scsi host2: ahci
[    1.739892] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.740206] scsi host3: ahci
[    1.740284] ata1: SATA max UDMA/133 abar m2048@0xb4408000 port 0xb4408100 irq 24
[    1.740290] ata2: SATA max UDMA/133 abar m2048@0xb4408000 port 0xb4408180 irq 24
[    1.740292] ata3: DUMMY
[    1.740294] ata4: DUMMY
[    2.024948] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.058228] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.058267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.059506] ata1.00: ATA-8: WDC WD5000BPVT-22A1YT0, 01.01A01, max UDMA/133
[    2.059512] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.060125] ata2.00: ATAPI: hp      DVD RW AD-7701H, 2.86, max UDMA/100
[    2.060906] ata1.00: configured for UDMA/133
[    2.061212] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 1A01 PQ: 0 ANSI: 5
[    2.066971] ata2.00: configured for UDMA/100
[    2.083227] scsi 1:0:0:0: CD-ROM            hp       DVD RW AD-7701H  2.86 PQ: 0 ANSI: 5
[    2.110593] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.110597] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.110708] sd 0:0:0:0: [sda] Write Protect is off
[    2.110710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.110750] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.133060] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.133067] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.133405] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.149528] hub 1-1:1.0: USB hub found
[    2.149625] hub 1-1:1.0: 6 ports detected
[    2.171047]  sda: sda1 sda2 sda3
[    2.172312] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.255000] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.379291] hub 2-1:1.0: USB hub found
[    2.379477] hub 2-1:1.0: 8 ports detected
[    2.398450] tsc: Refined TSC clocksource calibration: 2399.999 MHz
[    2.448786] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    2.691878] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.399407] Switched to clocksource tsc
[    3.602227] random: nonblocking pool is initialized
[    5.127401] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    5.470275] systemd-udevd[160]: starting version 216
[    6.156587] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[    6.157382] ACPI: Lid Switch [LID0]
[    6.157436] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[    6.157440] ACPI: Power Button [PWRB]
[    6.157486] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[    6.157488] ACPI: Power Button [PWRF]
[    6.191800] ACPI: AC Adapter [ADP1] (on-line)
[    6.240189] thermal LNXTHERM:00: registered as thermal_zone0
[    6.240194] ACPI: Thermal Zone [TSZ0] (40 C)
[    6.332463] ACPI: Battery Slot [BAT0] (battery present)
[    6.332642] wmi: Mapper loaded
[    6.374395] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    6.374424] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    6.374976] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    6.375121] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
[    6.437417] ACPI Warning: SystemIO range 0x0000000000003000-0x000000000000301f conflicts with OpRegion 0x0000000000003000-0x000000000000300f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[    6.437425] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.490391] [drm] Initialized drm 1.1.0 20060810
[    6.494309] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
[    6.494317] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.494320] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[    6.494324] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_GPE.GPIO) (20140724/utaddress-258)
[    6.494327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.494328] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[    6.494331] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_GPE.GPIO) (20140724/utaddress-258)
[    6.494334] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.494336] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[    6.494338] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_GPE.GPIO) (20140724/utaddress-258)
[    6.494342] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.494343] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.504293] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.580962] [drm] Memory usable by graphics device = 2048M
[    6.580966] [drm] Replacing VGA console driver
[    6.580971] checking generic (a0000000 300000) vs hw (a0000000 10000000)
[    6.580972] fb: switching to inteldrmfb from VESA VGA
[    6.580995] Console: switching to colour dummy device 80x25
[    6.601720] i915 0000:00:02.0: irq 25 for MSI/MSI-X
[    6.601730] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.601731] [drm] Driver supports precise vblank timestamp query.
[    6.601808] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.611497] iTCO_vendor_support: vendor-support=0
[    6.613652] media: Linux media interface: v0.10
[    6.622387] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.622421] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[    6.622533] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.633984] fbcon: inteldrmfb (fb0) is primary device
[    6.677470] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    6.782643] kvm: disabled by bios
[    6.825886] Linux video capture interface: v2.00
[    6.916466] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.916475] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    6.916740] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
[    6.916942] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000877e000, 68:b5:99:5b:f9:ce, XID 04e00000 IRQ 26
[    6.930509] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    6.945422] systemd-udevd[167]: renamed network interface eth0 to enp2s0
[    7.032305] uvcvideo: Found UVC 1.00 device HP Webcam-101 (5986:0149)
[    7.035722] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input12
[    7.035799] usbcore: registered new interface driver uvcvideo
[    7.035799] USB Video Class driver (1.1.1)
[    7.040951] input: HP WMI hotkeys as /devices/virtual/input/input13
[    7.094739] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400, board id: 3655, fw id: 639092
[    7.140946] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[    7.142709] mousedev: PS/2 mouse device common for all mice
[    7.362441] Console: switching to colour frame buffer device 200x56
[    7.370051] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.370054] i915 0000:00:02.0: registered panic notifier
[    7.420104] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.420738] acpi device:01: registered as cooling_device5
[    7.420878] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[    7.421106] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[    7.421329] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
[    7.423885] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[    7.737227] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.737232] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.737234] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.737236] sound hdaudioC0D0:    mono: mono_out=0x0
[    7.737237] sound hdaudioC0D0:    inputs:
[    7.737240] sound hdaudioC0D0:      Internal Mic=0x19
[    7.737242] sound hdaudioC0D0:      Mic=0x18
[    7.819546] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input19
[    7.819850] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    7.819925] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    7.821664] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    7.868487] Adding 5242876k swap on /dev/sda2.  Priority:-1 extents:1 across:5242876k FS
[    8.519770] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[    8.582314] systemd-journald[141]: Received request to flush runtime journal from PID 1
[   10.487810] cfg80211: Calling CRDA to update world regulatory domain
[   14.112219] r8169 0000:02:00.0 enp2s0: link down
[   14.112252] r8169 0000:02:00.0 enp2s0: link down
[   14.112260] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   15.836661] r8169 0000:02:00.0 enp2s0: link up
[   15.836678] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   19.377620] fuse init (API version 7.23)
[  495.817148] r8169 0000:02:00.0 enp2s0: link down
[  502.278688] r8169 0000:02:00.0 enp2s0: link up
[ 1555.514254] r8169 0000:02:00.0 enp2s0: link down
[ 1556.500950] r8169 0000:02:00.0 enp2s0: link down
[ 1556.500996] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1611.501356] perf interrupt took too long (2504 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
[ 1635.358365] r8169 0000:02:00.0 enp2s0: link up
[ 1635.358379] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 2708.829234] r8169 0000:02:00.0 enp2s0: link down
[ 2712.401378] r8169 0000:02:00.0 enp2s0: link down
[ 2712.401433] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2719.967902] r8169 0000:02:00.0 enp2s0: link up
[ 2719.967920] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 2722.398997] r8169 0000:02:00.0 enp2s0: link down
[ 2722.399006] r8169 0000:02:00.0 enp2s0: link down
[ 2722.399044] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2722.445772] r8169 0000:02:00.0 enp2s0: link down
[ 2722.445807] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2724.070931] r8169 0000:02:00.0 enp2s0: link up
[ 2724.070945] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 2729.414392] r8169 0000:02:00.0 enp2s0: link down
[ 2729.414401] r8169 0000:02:00.0 enp2s0: link down
[ 2729.414453] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2731.049144] r8169 0000:02:00.0 enp2s0: link up
[ 2731.049161] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 2901.334775] r8169 0000:02:00.0 enp2s0: link down
[ 2904.552005] r8169 0000:02:00.0 enp2s0: link down
[ 2904.552046] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2917.678130] r8169 0000:02:00.0 enp2s0: link up
[ 2917.678144] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 2979.599658] r8169 0000:02:00.0 enp2s0: link down
[ 2979.599681] r8169 0000:02:00.0 enp2s0: link down
[ 2979.599724] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2981.206433] r8169 0000:02:00.0 enp2s0: link up
[ 2981.206448] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 2994.601128] r8169 0000:02:00.0 enp2s0: link down
[ 2994.601140] r8169 0000:02:00.0 enp2s0: link down
[ 2994.601187] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2996.222839] r8169 0000:02:00.0 enp2s0: link up
[ 2996.222852] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
jasonwryan wrote:

So which driver are you supposed to be using according to that page and what, exactly, did you do to try and make it work?

Don't use wifi menu, or any other tool: attempt a manual setup and connection first as that way you will work out exactly where it is failing (and be able to post informative debugging information here if it doesn't work).



Moving to NC...

According to the wireless.kernerl.org I should be using brcm80211
http://wireless.kernel.org/en/users/Drivers/brcm80211

Sorry for posting in the wrong section.

Last edited by ArchChan (2014-10-26 03:42:53)

Offline

#5 2014-10-26 05:53:00

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: Unable to get wireless to work on Arch linux.

So, now you know what driver to use, you can attempt to connect manually.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

Pages: 1

Board footer

Powered by FluxBB