You are not logged in.
I am trying to get X working without using xf86-input-evdev. I have been successful except for the keyboard. Touchpad and mouse are working. When I launch X (with startx), my keyboard is not responding. I can't change tty either.
/etc/X11/xorg.conf.d/10-keyboard.conf
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "InputDevice"
Identifier "keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "AutoServerLayout" "on"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
EndSection
Xorg.1.log
[ 894.096]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 894.097] X Protocol Version 11, Revision 0
[ 894.097] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 894.098] Current Operating System: Linux arch 3.14.22-1-lts #1 SMP Wed Oct 15 08:30:13 UTC 2014 x86_64
[ 894.098] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=/dev/sda3 rw init=/usr/lib/systemd/systemd net.ifnames=0
[ 894.099] Build Date: 21 September 2014 10:53:13AM
[ 894.099]
[ 894.100] Current version of pixman: 0.32.6
[ 894.101] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 894.101] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 894.104] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Oct 29 16:42:45 2014
[ 894.105] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 894.105] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 894.106] (==) No Layout section. Using the first Screen section.
[ 894.106] (==) No screen section available. Using defaults.
[ 894.106] (**) |-->Screen "Default Screen Section" (0)
[ 894.106] (**) | |-->Monitor "<default monitor>"
[ 894.106] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 894.106] (**) | |-->Device "Intel Graphics"
[ 894.106] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 894.106] (**) |-->Input Device "keyboard0"
[ 894.106] (**) |-->Input Device "Mouse0"
[ 894.106] (**) Option "AutoAddDevices" "False"
[ 894.106] (**) Not automatically adding devices
[ 894.106] (==) Automatically enabling devices
[ 894.106] (==) Automatically adding GPU devices
[ 894.106] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 894.106] Entry deleted from font path.
[ 894.106] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 894.106] Entry deleted from font path.
[ 894.106] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 894.106] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 894.106] Entry deleted from font path.
[ 894.106] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 894.106] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 894.106] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 894.106] (==) |-->Input Device "Mouse0"
[ 894.106] (==) No Layout section. Using the first mouse device.
[ 894.106] (II) Loader magic: 0x818d80
[ 894.106] (II) Module ABI versions:
[ 894.106] X.Org ANSI C Emulation: 0.4
[ 894.106] X.Org Video Driver: 18.0
[ 894.106] X.Org XInput driver : 21.0
[ 894.106] X.Org Server Extension : 8.0
[ 894.108] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 894.109] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 894.109] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 894.110] (--) PCI:*(0:0:2:0) 8086:0156:1043:145d rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 894.110] (II) Open ACPI successful (/var/run/acpid.socket)
[ 894.110] (II) LoadModule: "glx"
[ 894.111] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 894.112] (II) Module glx: vendor="X.Org Foundation"
[ 894.112] compiled for 1.16.1, module version = 1.0.0
[ 894.112] ABI class: X.Org Server Extension, version 8.0
[ 894.112] (==) AIGLX enabled
[ 894.112] (II) LoadModule: "intel"
[ 894.112] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 894.113] (II) Module intel: vendor="X.Org Foundation"
[ 894.113] compiled for 1.16.1, module version = 2.99.916
[ 894.113] Module class: X.Org Video Driver
[ 894.113] ABI class: X.Org Video Driver, version 18.0
[ 894.113] (II) LoadModule: "kbd"
[ 894.113] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 894.159] (II) Module kbd: vendor="X.Org Foundation"
[ 894.159] compiled for 1.16.0, module version = 1.8.0
[ 894.159] Module class: X.Org XInput Driver
[ 894.159] ABI class: X.Org XInput driver, version 21.0
[ 894.159] (II) LoadModule: "mouse"
[ 894.159] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 894.160] (II) Module mouse: vendor="X.Org Foundation"
[ 894.160] compiled for 1.16.0, module version = 1.9.1
[ 894.160] Module class: X.Org XInput Driver
[ 894.160] ABI class: X.Org XInput driver, version 21.0
[ 894.160] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 894.161] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 894.161] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 894.161] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 894.161] (++) using VT number 1
[ 894.161] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 894.161] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 894.161] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 894.161] (==) intel(0): RGB weight 888
[ 894.161] (==) intel(0): Default visual is TrueColor
[ 894.161] (**) intel(0): Option "AccelMethod" "uxa"
[ 894.161] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2500
[ 894.162] (**) intel(0): Relaxed fencing enabled
[ 894.162] (**) intel(0): Wait on SwapBuffers? enabled
[ 894.162] (**) intel(0): Triple buffering? enabled
[ 894.162] (**) intel(0): Framebuffer tiled
[ 894.162] (**) intel(0): Pixmaps tiled
[ 894.162] (**) intel(0): 3D buffers tiled
[ 894.162] (**) intel(0): SwapBuffers wait enabled
[ 894.162] (==) intel(0): video overlay key set to 0x101fe
[ 894.162] (II) intel(0): Output LVDS1 has no monitor section
[ 894.162] (--) intel(0): found backlight control interface acpi_video0
[ 894.164] (II) intel(0): Output VGA1 has no monitor section
[ 894.164] (II) intel(0): Output HDMI1 has no monitor section
[ 894.164] (II) intel(0): Output DP1 has no monitor section
[ 894.165] (II) intel(0): EDID for output LVDS1
[ 894.165] (II) intel(0): Manufacturer: CMO Model: 15a7 Serial#: 0
[ 894.165] (II) intel(0): Year: 2010 Week: 31
[ 894.165] (II) intel(0): EDID Version: 1.3
[ 894.165] (II) intel(0): Digital Display Input
[ 894.165] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 894.165] (II) intel(0): Gamma: 2.20
[ 894.165] (II) intel(0): No DPMS capabilities specified
[ 894.165] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 894.165] (II) intel(0): First detailed timing is preferred mode
[ 894.165] (II) intel(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 894.165] (II) intel(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 894.165] (II) intel(0): Manufacturer's mask: 0
[ 894.165] (II) intel(0): Supported detailed timing:
[ 894.165] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 894.165] (II) intel(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 894.165] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 894.165] (II) intel(0): N156BGE-L21
[ 894.165] (II) intel(0): CMO
[ 894.165] (II) intel(0): N156BGE-L21
[ 894.165] (II) intel(0): EDID (in hex):
[ 894.165] (II) intel(0): 00ffffffffffff000dafa71500000000
[ 894.165] (II) intel(0): 1f140103802313780a00259e57529929
[ 894.165] (II) intel(0): 15505400000001010101010101010101
[ 894.165] (II) intel(0): 010101010101121b5664500014301022
[ 894.165] (II) intel(0): 260058c110000018000000fe004e3135
[ 894.165] (II) intel(0): 364247452d4c32310a20000000fe0043
[ 894.165] (II) intel(0): 4d4f0a202020202020202020000000fe
[ 894.165] (II) intel(0): 004e3135364247452d4c32310a200095
[ 894.165] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 894.165] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 894.165] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 894.165] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 894.165] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 894.165] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 894.165] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 894.165] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 894.165] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 894.166] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 894.166] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 894.166] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 894.166] (II) intel(0): Printing probed modes for output LVDS1
[ 894.166] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 894.166] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 894.166] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 894.166] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 894.166] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 894.167] (II) intel(0): EDID for output VGA1
[ 894.167] (II) intel(0): EDID for output HDMI1
[ 894.167] (II) intel(0): EDID for output DP1
[ 894.168] (II) intel(0): Output LVDS1 connected
[ 894.168] (II) intel(0): Output VGA1 disconnected
[ 894.168] (II) intel(0): Output HDMI1 disconnected
[ 894.168] (II) intel(0): Output DP1 disconnected
[ 894.168] (II) intel(0): Using exact sizes for initial modes
[ 894.168] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 894.168] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 894.168] (II) intel(0): Kernel page flipping support detected, enabling
[ 894.168] (==) intel(0): DPI set to (96, 96)
[ 894.168] (II) Loading sub module "fb"
[ 894.168] (II) LoadModule: "fb"
[ 894.168] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 894.169] (II) Module fb: vendor="X.Org Foundation"
[ 894.169] compiled for 1.16.1, module version = 1.0.0
[ 894.169] ABI class: X.Org ANSI C Emulation, version 0.4
[ 894.169] (II) Loading sub module "dri2"
[ 894.169] (II) LoadModule: "dri2"
[ 894.169] (II) Module "dri2" already built-in
[ 894.169] (==) Depth 24 pixmap format is 32 bpp
[ 894.169] (II) intel(0): Allocated new frame buffer 1366x768 stride 5632, untiled
[ 894.170] (II) UXA(0): Driver registered support for the following operations:
[ 894.170] (II) solid
[ 894.170] (II) copy
[ 894.170] (II) composite (RENDER acceleration)
[ 894.170] (II) put_image
[ 894.170] (II) get_image
[ 894.170] (II) intel(0): [DRI2] Setup complete
[ 894.171] (II) intel(0): [DRI2] DRI driver: i965
[ 894.171] (II) intel(0): [DRI2] VDPAU driver: i965
[ 894.171] (==) intel(0): Backing store enabled
[ 894.171] (==) intel(0): Silken mouse enabled
[ 894.171] (II) intel(0): Initializing HW Cursor
[ 894.171] (II) intel(0): Use legacy UXA acceleration.
[ 894.171] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 894.171] (==) intel(0): DPMS enabled
[ 894.171] (==) intel(0): Intel XvMC decoder enabled
[ 894.171] (II) intel(0): Set up textured video
[ 894.171] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 894.171] (II) intel(0): DRI2: Enabled
[ 894.171] (II) intel(0): DRI3: Not available
[ 894.171] (==) intel(0): hotplug detection: "enabled"
[ 894.190] (--) RandR disabled
[ 894.232] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 894.232] (II) AIGLX: enabled GLX_ARB_create_context
[ 894.232] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 894.232] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 894.232] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 894.232] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 894.232] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 894.232] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 894.232] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 894.232] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 894.232] (II) AIGLX: Loaded and initialized i965
[ 894.232] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 894.233] (II) intel(0): Setting screen physical size to 361 x 203
[ 894.304] (II) Using input driver 'kbd' for 'keyboard0'
[ 894.304] (**) Option "CoreKeyboard"
[ 894.304] (**) keyboard0: always reports core events
[ 894.304] (**) keyboard0: always reports core events
[ 894.304] (**) Option "Protocol" "standard"
[ 894.304] (**) Option "XkbRules" "xorg"
[ 894.304] (**) Option "XkbModel" "pc104"
[ 894.304] (**) Option "XkbLayout" "us"
[ 894.304] (II) XINPUT: Adding extended input device "keyboard0" (type: KEYBOARD, id 6)
[ 894.330] (II) Using input driver 'mouse' for 'Mouse0'
[ 894.330] (**) Option "CorePointer" "on"
[ 894.330] (**) Mouse0: always reports core events
[ 894.330] (**) Option "Device" "/dev/input/mice"
[ 894.330] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 894.330] (==) Mouse0: Protocol: "ExplorerPS/2"
[ 894.330] (**) Mouse0: always reports core events
[ 894.440] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 894.440] (**) Mouse0: ZAxisMapping: buttons 4 and 5
[ 894.440] (**) Mouse0: Buttons: 9
[ 894.440] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 7)
[ 894.440] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 894.440] (**) Mouse0: (accel) acceleration profile 0
[ 894.440] (**) Mouse0: (accel) acceleration factor: 2.000
[ 894.440] (**) Mouse0: (accel) acceleration threshold: 4
[ 894.734] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 894.734] (II) Using input driver 'mouse' for 'Mouse0'
[ 894.734] (**) Option "CorePointer" "on"
[ 894.734] (**) Mouse0: always reports core events
[ 894.734] (**) Option "Device" "/dev/input/mice"
[ 894.734] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 894.734] (==) Mouse0: Protocol: "ExplorerPS/2"
[ 894.734] (**) Mouse0: always reports core events
[ 894.760] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 894.760] (**) Mouse0: ZAxisMapping: buttons 4 and 5
[ 894.760] (**) Mouse0: Buttons: 9
[ 894.760] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 8)
[ 894.760] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 894.760] (**) Mouse0: (accel) acceleration profile 0
[ 894.760] (**) Mouse0: (accel) acceleration factor: 2.000
[ 894.760] (**) Mouse0: (accel) acceleration threshold: 4
[ 895.054] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 895.057] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 895.057] (II) AutoAddDevices is off - not adding device.
[ 895.057] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 895.057] (II) AutoAddDevices is off - not adding device.
[ 895.058] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 895.058] (II) AutoAddDevices is off - not adding device.
[ 895.058] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 895.058] (II) AutoAddDevices is off - not adding device.
[ 895.059] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:400a (/dev/input/event1)
[ 895.059] (II) AutoAddDevices is off - not adding device.
[ 895.059] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:400a (/dev/input/mouse0)
[ 895.059] (II) AutoAddDevices is off - not adding device.
[ 895.060] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event7)
[ 895.060] (II) AutoAddDevices is off - not adding device.
[ 895.060] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 895.060] (II) AutoAddDevices is off - not adding device.
[ 895.061] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[ 895.061] (II) AutoAddDevices is off - not adding device.
[ 895.061] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 895.061] (II) AutoAddDevices is off - not adding device.
[ 895.061] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 895.061] (II) AutoAddDevices is off - not adding device.
[ 895.062] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 895.062] (II) AutoAddDevices is off - not adding device.
[ 895.062] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 895.062] (II) AutoAddDevices is off - not adding device.
Offline