Arch Linux

joaocandre

Member

Registered: 2013-02-23

Posts: 157

Re: The AMD/ATI Bar & Grill

Switched from open source drivers to catalyst, but cannot get X to start. Xorg log file throws the error (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory. Any idea how to fix this? I've seen some supposed solutions for Ubuntu, quite reluctant to try them out in fear of breaking things even more.

I've installed the proprietary drivers through Vi0L0's repository, and followed all the instructions in ArchWiki (blacklisting 'radeon' module, adding 'nomodeset' to boot), but I don't get past the boot messages, and fglrxinfo shows Error: unable to open display (null)...

Reznor

Member

From: BiH

Registered: 2012-06-23

Posts: 78

Re: The AMD/ATI Bar & Grill

Just have to say that all my problems went away with Xorg 1.16 and kernel 3.16
So, no more overheats, laptop cold start temperature is 38C, on load about 56C which is incredible compared to what I had earlier.
It seems that radeon.dpm=0 is no longer needed, I haven't seen old issue yet with washed out stripes. And on top of all that, brightness controls are now working natively, no more flickering and lag when changing brightness with fn+f5/f6, then, I can switch to external display modes (cloned,single, etc.) without having to reboot system, as I had with fglrx. I hope it will stay like this in future
My laptop is ASUS K55N-DS81 with APU A8-4500M and HD7640G graphics.

M8 I have the same hardware configuration.

Now using Arch + KDE and Arch + XFCE without problems with Vi0l0's Catalyst-hook packages.

However I'm able to run GNOME 3.14 only with open source drivers. Overheat problems are gone, but actually I get some problems of power consumption: laptop's battery life is still better with Catalyst (using amdconfig --px-igpu and battery oriented power management).

Do you are using some power management configuration with open drivers? I tried dpm + poweroff discrete gpu (https://wiki.archlinux.org/index.php/ATI#Powersaving) but I'm unable to set battery mode, and overall battery life isn't very good.

Those profiles never really worked for me. I changed profile to low, but it doesn't seem to affect anything. Battery is not an issue for me. 95% of time I use my laptop on AC.
Gnome >3.10 worked for me, but as someone mentioned in previous post gdm will have to be downgraded to 3.10, or use lightdm if you want it with fglrx.
And I don't know about discrete GPU, I think that mine 7640G is integrated graphics.
But overall I'm satisfied, because I finally have everything working out-of-box and I can do anything without cooling down my laptop. I had to put some things under laptop to make better airflow. I was also planning to buy a cooling pad

---

rm -rf /

milli-961227

Member

Registered: 2014-04-15

Posts: 13

Re: The AMD/ATI Bar & Grill

Switched from open source drivers to catalyst, but cannot get X to start. Xorg log file throws the error (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory. Any idea how to fix this? I've seen some supposed solutions for Ubuntu, quite reluctant to try them out in fear of breaking things even more.

Making a symbolic link from /usr/lib/xorg/modules to /usr/X11R6/lib64/modules worked for me. Create the directory /usr/X11R6/lib64 if it does not exist.

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

error (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory

was never the problem. fglrx will find this lib anyway, its throwing error because its not finding it in default (for AMD/ubuntu/whatever) directory. Making X11R6 symlink should never be the solution, and looks nasty. Check if /usr/lib/xorg/modules/dri/fglrx_dri.so exists and ignore this error.
Please paste whole Xorg.0.log, so we could look whats really going on.
Also:

fglrxinfo shows Error: unable to open display (null)

- it's normall (for catalyst) you need to start X, otherwise it will always show this error

As for the GNOME 3.14 - wish I have more time to look at this closer, I catched problems with GNOME latelly (but before 3.14) - it started to crash before start - I spent not much time on it, but didn't find solution. Fixing it is not that important for me right now, since im planning to install arch on btrfs 2xSSD . Its just the time... Wish I had some kind of clone of myself with shared awareness .
But anyhow I think that GNOME 3.14 support could be real problem atm (at least with unmodified gnome packages), afaik 3.14 is really close to wayland and catalyst doesn't even have egl.

Last edited by Vi0L0 (2014-10-19 10:33:57)

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

joaocandre

Member

Registered: 2013-02-23

Posts: 157

Re: The AMD/ATI Bar & Grill

was never the problem. fglrx will find this lib anyway, its throwing error because its not finding it in default (for AMD/ubuntu/whatever) directory. Making X11R6 symlink should never be the solution, and looks nasty. Check if /usr/lib/xorg/modules/dri/fglrx_dri.so exists and ignore this error.

Exactly, I came across the symlinking solution in some Ubuntu forums but it seemed more like a workaround and definely not a permanent solution.
/usr/lib/xorg/modules/dri/fglrx_dri.so does exists in my system.

Please paste whole Xorg.0.log, so we could look whats really going on.

Here it goes. For some reason when I run startx, the log file created is Xorg.6.log. Not sure if the numbering is relevant (there are no other Xorg log files under /var/log)

[  1405.185] 
X.Org X Server 1.16.1
Release Date: 2014-09-21
[  1405.189] X Protocol Version 11, Revision 0
[  1405.190] Build Operating System: Linux 3.16.1-1-ARCH x86_64 
[  1405.191] Current Operating System: Linux joao-desktop 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[  1405.191] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda3 rw nomodeset
[  1405.193] Build Date: 21 September 2014  10:53:13AM
[  1405.194]  
[  1405.195] Current version of pixman: 0.32.6
[  1405.198] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1405.198] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1405.202] (==) Log file: "/var/log/Xorg.6.log", Time: Sun Oct 19 14:58:04 2014
[  1405.203] (==) Using config file: "/etc/X11/xorg.conf"
[  1405.204] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1405.205] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1405.206] (==) ServerLayout "Arch"
[  1405.206] (**) |-->Screen "Screen0" (0)
[  1405.206] (**) |   |-->Monitor "Monitor0"
[  1405.206] (**) |   |-->Device "card0"
[  1405.206] (==) Automatically adding devices
[  1405.206] (==) Automatically enabling devices
[  1405.206] (==) Automatically adding GPU devices
[  1405.206] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1405.206] 	Entry deleted from font path.
[  1405.206] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1405.206] 	Entry deleted from font path.
[  1405.206] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1405.206] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1405.206] 	Entry deleted from font path.
[  1405.206] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1405.206] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[  1405.206] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1405.206] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1405.206] (II) Loader magic: 0x818d80
[  1405.206] (II) Module ABI versions:
[  1405.206] 	X.Org ANSI C Emulation: 0.4
[  1405.206] 	X.Org Video Driver: 18.0
[  1405.206] 	X.Org XInput driver : 21.0
[  1405.206] 	X.Org Server Extension : 8.0
[  1405.208] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[  1405.209] (--) PCI:*(0:1:0:0) 1002:68b8:1043:0344 rev 0, Mem @ 0xe0000000/268435456, 0xf7e20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[  1405.209] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1405.209] (II) "glx" will be loaded by default.
[  1405.209] (II) LoadModule: "glx"
[  1405.209] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1405.209] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[  1405.209] 	compiled for 6.9.0, module version = 1.0.0
[  1405.210] (II) LoadModule: "fglrx"
[  1405.210] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[  1405.226] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[  1405.226] 	compiled for 1.4.99.906, module version = 14.20.7
[  1405.226] 	Module class: X.Org Video Driver
[  1405.227] (II) Loading sub module "fglrxdrm"
[  1405.227] (II) LoadModule: "fglrxdrm"
[  1405.227] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  1405.227] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  1405.227] 	compiled for 1.4.99.906, module version = 14.20.7
[  1405.227] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[  1405.227] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002         
[  1405.227] (II) AMD Proprietary Linux Driver Build Date: Sep  2 2014 10:14:55
[  1405.227] (++) using VT number 2

[  1405.227] (--) controlling tty is VT number 2, auto-enabling KeepTty
[  1405.227] (WW) Falling back to old probe method for fglrx
[  1405.231] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[  1405.232] ukiDynamicMajor: found major device number 251
[  1405.232] ukiDynamicMajor: found major device number 251
[  1405.232] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1405.232] ukiOpenDevice: node name is /dev/ati/card0
[  1405.232] ukiOpenDevice: open result is 10, (OK)
[  1405.232] ukiOpenByBusid: ukiOpenMinor returns 10
[  1405.232] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1405.233] (--) Chipset Supported AMD Graphics Processor (0x68B8) found
[  1405.233] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[  1405.234] (II) fglrx(0): pEnt->device->identifier=0x2772cc0
[  1405.234] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[  1405.234] (II) Loading sub module "vgahw"
[  1405.234] (II) LoadModule: "vgahw"
[  1405.234] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  1405.234] (II) Module vgahw: vendor="X.Org Foundation"
[  1405.234] 	compiled for 1.16.1, module version = 0.1.0
[  1405.234] 	ABI class: X.Org Video Driver, version 18.0
[  1405.235] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[  1405.235] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  1405.235] (==) fglrx(0): Default visual is TrueColor
[  1405.235] (**) fglrx(0): Option "DPMS" "true"
[  1405.235] (==) fglrx(0): RGB weight 888
[  1405.235] (II) fglrx(0): Using 8 bits per RGB 
[  1405.235] (==) fglrx(0): Buffer Tiling is ON
[  1405.235] (II) Loading sub module "fglrxdrm"
[  1405.235] (II) LoadModule: "fglrxdrm"
[  1405.235] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  1405.235] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  1405.235] 	compiled for 1.4.99.906, module version = 14.20.7
[  1405.236] ukiDynamicMajor: found major device number 251
[  1405.236] ukiDynamicMajor: found major device number 251
[  1405.236] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1405.236] ukiOpenDevice: node name is /dev/ati/card0
[  1405.236] ukiOpenDevice: open result is 12, (OK)
[  1405.236] ukiOpenByBusid: ukiOpenMinor returns 12
[  1405.236] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1405.236] (**) fglrx(0): NoAccel = NO
[  1405.236] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[  1405.236] (--) fglrx(0): Chipset: "AMD Radeon HD 5700 Series" (Chipset = 0x68b8)
[  1405.236] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x0344)
[  1405.236] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[  1405.236] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[  1405.236] (--) fglrx(0): MMIO registers at 0xf7e20000
[  1405.236] (--) fglrx(0): I/O port at 0x0000e000
[  1405.236] (==) fglrx(0): ROM-BIOS at 0x000c0000
[  1405.237] (II) fglrx(0): AC Adapter is used
[  1405.237] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[  1405.237] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[  1405.237] (II) fglrx(0): PCIE card detected
[  1405.237] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[  1405.237] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[  1405.237] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[  1405.237] (II) fglrx(0): RandR 1.2 support is enabled!
[  1405.237] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[  1405.237] (II) Loading sub module "fb"
[  1405.237] (II) LoadModule: "fb"
[  1405.237] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1405.237] (II) Module fb: vendor="X.Org Foundation"
[  1405.237] 	compiled for 1.16.1, module version = 1.0.0
[  1405.237] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1405.237] (II) fglrx(0): EDID Management option: EDID Management is enabled
[  1405.237] (II) Loading sub module "ddc"
[  1405.237] (II) LoadModule: "ddc"
[  1405.237] (II) Module "ddc" already built-in
[  1405.370] (II) fglrx(0): Output DFP1 using monitor section Monitor0
[  1405.370] (II) fglrx(0): Output DFP2 has no monitor section
[  1405.370] (II) fglrx(0): Output CRT1 has no monitor section
[  1405.370] (II) fglrx(0): Output CRT2 has no monitor section
[  1405.370] (II) Loading sub module "ddc"
[  1405.370] (II) LoadModule: "ddc"
[  1405.370] (II) Module "ddc" already built-in
[  1405.370] (II) fglrx(0): Connected Display0: DFP1
[  1405.371] (II) fglrx(0): Display0 EDID data ---------------------------
[  1405.371] (II) fglrx(0): Manufacturer: ACI  Model: 23e1  Serial#: 16843009
[  1405.371] (II) fglrx(0): Year: 2013  Week: 27
[  1405.371] (II) fglrx(0): EDID Version: 1.3
[  1405.371] (II) fglrx(0): Digital Display Input
[  1405.371] (II) fglrx(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[  1405.371] (II) fglrx(0): Gamma: 2.20
[  1405.371] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[  1405.371] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1405.371] (II) fglrx(0): First detailed timing is preferred mode
[  1405.371] (II) fglrx(0): redX: 0.651 redY: 0.338   greenX: 0.321 greenY: 0.614
[  1405.371] (II) fglrx(0): blueX: 0.154 blueY: 0.063   whiteX: 0.313 whiteY: 0.329
[  1405.371] (II) fglrx(0): Supported established timings:
[  1405.371] (II) fglrx(0): 720x400@70Hz
[  1405.371] (II) fglrx(0): 640x480@60Hz
[  1405.371] (II) fglrx(0): 640x480@72Hz
[  1405.371] (II) fglrx(0): 640x480@75Hz
[  1405.371] (II) fglrx(0): 800x600@56Hz
[  1405.371] (II) fglrx(0): 800x600@60Hz
[  1405.371] (II) fglrx(0): 800x600@72Hz
[  1405.371] (II) fglrx(0): 800x600@75Hz
[  1405.371] (II) fglrx(0): 1024x768@60Hz
[  1405.371] (II) fglrx(0): 1024x768@70Hz
[  1405.371] (II) fglrx(0): 1024x768@75Hz
[  1405.371] (II) fglrx(0): 1280x1024@75Hz
[  1405.371] (II) fglrx(0): 1152x864@75Hz
[  1405.371] (II) fglrx(0): Manufacturer's mask: 0
[  1405.371] (II) fglrx(0): Supported standard timings:
[  1405.371] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[  1405.371] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  1405.371] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[  1405.371] (II) fglrx(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[  1405.371] (II) fglrx(0): #4: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[  1405.371] (II) fglrx(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[  1405.371] (II) fglrx(0): #6: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[  1405.371] (II) fglrx(0): Supported detailed timing:
[  1405.371] (II) fglrx(0): clock: 148.5 MHz   Image Size:  510 x 290 mm
[  1405.371] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  1405.371] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  1405.371] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[  1405.371] (II) fglrx(0): Monitor name: VX239
[  1405.371] (II) fglrx(0): Serial No: D7LMRS001217
[  1405.371] (II) fglrx(0): Supported detailed timing:
[  1405.371] (II) fglrx(0): clock: 148.5 MHz   Image Size:  510 x 290 mm
[  1405.371] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  1405.371] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  1405.371] (II) fglrx(0): Supported detailed timing:
[  1405.371] (II) fglrx(0): clock: 74.2 MHz   Image Size:  510 x 290 mm
[  1405.371] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  1405.371] (II) fglrx(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[  1405.371] (II) fglrx(0): Supported detailed timing:
[  1405.371] (II) fglrx(0): clock: 74.2 MHz   Image Size:  510 x 290 mm
[  1405.371] (II) fglrx(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[  1405.371] (II) fglrx(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[  1405.371] (II) fglrx(0): Supported detailed timing:
[  1405.371] (II) fglrx(0): clock: 27.0 MHz   Image Size:  510 x 290 mm
[  1405.371] (II) fglrx(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[  1405.371] (II) fglrx(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[  1405.371] (II) fglrx(0): Number of EDID sections to follow: 1
[  1405.371] (II) fglrx(0): EDID (in hex):
[  1405.371] (II) fglrx(0): 	00ffffffffffff000469e12301010101
[  1405.371] (II) fglrx(0): 	1b17010380331d78eae595a656529d27
[  1405.371] (II) fglrx(0): 	105054afcf80714f8180818fb3008140
[  1405.371] (II) fglrx(0): 	9500a9400101023a801871382d40582c
[  1405.371] (II) fglrx(0): 	4500fe221100001e000000fd00384b1e
[  1405.371] (II) fglrx(0): 	530f000a202020202020000000fc0056
[  1405.371] (II) fglrx(0): 	583233390a20202020202020000000ff
[  1405.371] (II) fglrx(0): 	0044374c4d52533030313231370a013a
[  1405.371] (II) fglrx(0): End of Display0 EDID data --------------------
[  1405.371] (II) fglrx(0): Dynamic Surface Resizing Enabled
[  1405.371] (II) fglrx(0): EDID for output DFP1
[  1405.371] (II) fglrx(0): Manufacturer: ACI  Model: 23e1  Serial#: 16843009
[  1405.371] (II) fglrx(0): Year: 2013  Week: 27
[  1405.371] (II) fglrx(0): EDID Version: 1.3
[  1405.371] (II) fglrx(0): Digital Display Input
[  1405.371] (II) fglrx(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[  1405.371] (II) fglrx(0): Gamma: 2.20
[  1405.371] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[  1405.371] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1405.371] (II) fglrx(0): First detailed timing is preferred mode
[  1405.371] (II) fglrx(0): redX: 0.651 redY: 0.338   greenX: 0.321 greenY: 0.614
[  1405.372] (II) fglrx(0): blueX: 0.154 blueY: 0.063   whiteX: 0.313 whiteY: 0.329
[  1405.372] (II) fglrx(0): Supported established timings:
[  1405.372] (II) fglrx(0): 720x400@70Hz
[  1405.372] (II) fglrx(0): 640x480@60Hz
[  1405.372] (II) fglrx(0): 640x480@72Hz
[  1405.372] (II) fglrx(0): 640x480@75Hz
[  1405.372] (II) fglrx(0): 800x600@56Hz
[  1405.372] (II) fglrx(0): 800x600@60Hz
[  1405.372] (II) fglrx(0): 800x600@72Hz
[  1405.372] (II) fglrx(0): 800x600@75Hz
[  1405.372] (II) fglrx(0): 1024x768@60Hz
[  1405.372] (II) fglrx(0): 1024x768@70Hz
[  1405.372] (II) fglrx(0): 1024x768@75Hz
[  1405.372] (II) fglrx(0): 1280x1024@75Hz
[  1405.372] (II) fglrx(0): 1152x864@75Hz
[  1405.372] (II) fglrx(0): Manufacturer's mask: 0
[  1405.372] (II) fglrx(0): Supported standard timings:
[  1405.372] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[  1405.372] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  1405.372] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[  1405.372] (II) fglrx(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[  1405.372] (II) fglrx(0): #4: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[  1405.372] (II) fglrx(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[  1405.372] (II) fglrx(0): #6: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[  1405.372] (II) fglrx(0): Supported detailed timing:
[  1405.372] (II) fglrx(0): clock: 148.5 MHz   Image Size:  510 x 290 mm
[  1405.372] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  1405.372] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  1405.372] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[  1405.372] (II) fglrx(0): Monitor name: VX239
[  1405.372] (II) fglrx(0): Serial No: D7LMRS001217
[  1405.372] (II) fglrx(0): Supported detailed timing:
[  1405.372] (II) fglrx(0): clock: 148.5 MHz   Image Size:  510 x 290 mm
[  1405.372] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  1405.372] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  1405.372] (II) fglrx(0): Supported detailed timing:
[  1405.372] (II) fglrx(0): clock: 74.2 MHz   Image Size:  510 x 290 mm
[  1405.372] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  1405.372] (II) fglrx(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[  1405.372] (II) fglrx(0): Supported detailed timing:
[  1405.372] (II) fglrx(0): clock: 74.2 MHz   Image Size:  510 x 290 mm
[  1405.372] (II) fglrx(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[  1405.372] (II) fglrx(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[  1405.372] (II) fglrx(0): Supported detailed timing:
[  1405.372] (II) fglrx(0): clock: 27.0 MHz   Image Size:  510 x 290 mm
[  1405.372] (II) fglrx(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[  1405.372] (II) fglrx(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[  1405.372] (II) fglrx(0): Number of EDID sections to follow: 1
[  1405.372] (II) fglrx(0): EDID (in hex):
[  1405.372] (II) fglrx(0): 	00ffffffffffff000469e12301010101
[  1405.372] (II) fglrx(0): 	1b17010380331d78eae595a656529d27
[  1405.372] (II) fglrx(0): 	105054afcf80714f8180818fb3008140
[  1405.372] (II) fglrx(0): 	9500a9400101023a801871382d40582c
[  1405.372] (II) fglrx(0): 	4500fe221100001e000000fd00384b1e
[  1405.372] (II) fglrx(0): 	530f000a202020202020000000fc0056
[  1405.372] (II) fglrx(0): 	583233390a20202020202020000000ff
[  1405.372] (II) fglrx(0): 	0044374c4d52533030313231370a013a
[  1405.372] (II) fglrx(0): EDID vendor "ACI", prod id 9185
[  1405.372] (II) fglrx(0): Using EDID range info for horizontal sync
[  1405.372] (II) fglrx(0): Using EDID range info for vertical refresh
[  1405.372] (II) fglrx(0): Printing DDC gathered Modelines:
[  1405.372] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[  1405.372] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1405.372] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[  1405.372] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1405.372] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  1405.372] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[  1405.372] (II) fglrx(0): Printing probed modes for output DFP1
[  1405.372] (II) fglrx(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[  1405.372] (II) fglrx(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1920x1080"x60.0   74.25  1920 2008 2052 2200  1080 1085 1095 1125 interlace +hsync +vsync (33.8 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1920x1080"x50.0   74.25  1920 2448 2492 2640  1080 1085 1095 1125 interlace +hsync +vsync (28.1 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1920x1080"x59.9   74.18  1920 2008 2052 2200  1080 1085 1095 1125 interlace +hsync +vsync (33.7 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1776x1000"x50.0  148.50  1776 2304 2348 2640  1000 1004 1009 1125 +hsync +vsync (56.2 kHz ez)
[  1405.372] (II) fglrx(0): Modeline "1776x1000"x59.9  148.35  1776 1864 1908 2200  1000 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
[  1405.372] (II) fglrx(0): Modeline "1776x1000"x50.0   74.25  1776 2304 2348 2640  1000 1005 1015 1125 interlace +hsync +vsync (28.1 kHz ez)
[  1405.372] (II) fglrx(0): Modeline "1776x1000"x59.9   74.18  1776 1864 1908 2200  1000 1005 1015 1125 interlace +hsync +vsync (33.7 kHz ez)
[  1405.372] (II) fglrx(0): Modeline "1680x1050"x50.0  148.50  1680 2448 2492 2640  1050 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1400x1050"x60.0  162.00  1400 1664 1856 2160  1050 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1400x1050"x50.0  148.50  1400 2448 2492 2640  1050 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1600x900"x60.0  162.00  1600 1664 1856 2160  900 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1600x900"x50.0  148.50  1600 2448 2492 2640  900 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x1024"x50.0  148.50  1280 2448 2492 2640  1024 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1440x900"x50.0  148.50  1440 2448 2492 2640  900 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x960"x50.0  148.50  1280 2448 2492 2640  960 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1152x864"x50.0  148.50  1152 2448 2492 2640  864 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1152x864"x59.9  148.35  1152 2008 2052 2200  864 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x768"x50.0  148.50  1280 2448 2492 2640  768 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1376 1488 1800  768 961 964 1000 +hsync +vsync (60.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1024x768"x50.0  148.50  1024 2448 2492 2640  768 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1405.372] (II) fglrx(0): Modeline "1152x648"x50.0   74.25  1152 1592 1632 1980  648 653 658 750 +hsync +vsync (37.5 kHz ez)
[  1405.372] (II) fglrx(0): Modeline "1152x648"x59.9   74.18  1152 1262 1302 1650  648 653 658 750 +hsync +vsync (45.0 kHz ez)
[  1405.372] (II) fglrx(0): Modeline "800x600"x50.0  148.50  800 2448 2492 2640  600 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  1405.372] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  1405.372] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1405.372] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "720x480"x50.0  148.50  720 2448 2492 2640  480 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "640x480"x50.0  148.50  640 2448 2492 2640  480 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  1405.372] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 -hsync -vsync (37.9 kHz e)
[  1405.372] (II) fglrx(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1405.372] (II) fglrx(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1405.372] (II) fglrx(0): EDID for output DFP2
[  1405.372] (II) fglrx(0): EDID for output CRT1
[  1405.372] (II) fglrx(0): EDID for output CRT2
[  1405.372] (II) fglrx(0): Output DFP1 connected
[  1405.372] (II) fglrx(0): Output DFP2 disconnected
[  1405.372] (II) fglrx(0): Output CRT1 disconnected
[  1405.372] (II) fglrx(0): Output CRT2 disconnected
[  1405.372] (II) fglrx(0): Using exact sizes for initial modes
[  1405.372] (II) fglrx(0): Output DFP1 using initial mode 1920x1080
[  1405.372] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1405.372] (II) fglrx(0): Display dimensions: (510, 290) mm
[  1405.372] (II) fglrx(0): DPI set to (95, 95)
[  1405.372] (II) fglrx(0): Eyefinity capable adapter detected.
[  1405.372] (II) fglrx(0): Adapter AMD Radeon HD 5700 Series has 5 configurable heads and 1 displays connected.
[  1405.372] (==) fglrx(0):  PseudoColor visuals disabled
[  1405.372] (II) Loading sub module "ramdac"
[  1405.372] (II) LoadModule: "ramdac"
[  1405.372] (II) Module "ramdac" already built-in
[  1405.373] (==) fglrx(0): NoDRI = NO
[  1405.373] (==) fglrx(0): Capabilities: 0x00000000
[  1405.373] (==) fglrx(0): CapabilitiesEx: 0x00000000
[  1405.373] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[  1405.373] (==) fglrx(0): UseFastTLS=0
[  1405.373] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[  1405.373] (--) Depth 24 pixmap format is 32 bpp
[  1405.373] (II) fglrx(0): doing swlDriScreenInit
[  1405.373] (II) fglrx(0): swlDriScreenInit for fglrx driver
[  1405.373] ukiDynamicMajor: found major device number 251
[  1405.373] ukiDynamicMajor: found major device number 251
[  1405.373] ukiDynamicMajor: found major device number 251
[  1405.373] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1405.373] ukiOpenDevice: node name is /dev/ati/card0
[  1405.373] ukiOpenDevice: open result is 13, (OK)
[  1405.373] ukiOpenByBusid: ukiOpenMinor returns 13
[  1405.373] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1405.373] (II) fglrx(0): [uki] DRM interface version 1.0
[  1405.373] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[  1405.373] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x40000
[  1405.373] (II) fglrx(0): [uki] mapped SAREA 0x40000 to 0x7f13b985b000
[  1405.373] (II) fglrx(0): [uki] framebuffer handle = 0x41000
[  1405.373] (II) fglrx(0): [uki] added 1 reserved context for kernel
[  1405.373] (II) fglrx(0): swlDriScreenInit done
[  1405.373] (II) fglrx(0): Kernel Module Version Information:
[  1405.373] (II) fglrx(0):     Name: fglrx
[  1405.373] (II) fglrx(0):     Version: 14.20.7
[  1405.373] (II) fglrx(0):     Date: Sep  2 2014
[  1405.373] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[  1405.373] (II) fglrx(0): Kernel Module version matches driver.
[  1405.373] (II) fglrx(0): Kernel Module Build Time Information:
[  1405.373] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.16.4-1-ARCH
[  1405.373] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[  1405.373] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[  1405.373] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[  1405.373] (II) fglrx(0): [uki] register handle = 0x00042000
[  1405.374] (II) fglrx(0): DRI initialization successfull
[  1405.374] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010e0000
[  1405.374] (==) fglrx(0): Backing store enabled
[  1405.374] (**) fglrx(0): DPMS enabled
[  1405.374] (II) fglrx(0): Initialized in-driver Xinerama extension
[  1405.374] (**) fglrx(0): Textured Video is enabled.
[  1405.374] (II) LoadModule: "glesx"
[  1405.374] (II) Loading /usr/lib/xorg/modules/glesx.so
[  1405.375] (II) Module glesx: vendor="X.Org Foundation"
[  1405.375] 	compiled for 1.4.99.906, module version = 1.0.0
[  1405.375] (II) fglrx(0): GLESX enableFlags = 8784
[  1405.375] (II) fglrx(0): GLESX is enabled
[  1405.375] (II) LoadModule: "amdxmm"
[  1405.375] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[  1405.375] (II) Module amdxmm: vendor="X.Org Foundation"
[  1405.375] 	compiled for 1.4.99.906, module version = 2.0.0
[  1405.395] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[  1405.396] (II) fglrx(0): Enable composite support successfully
[  1405.396] (WW) fglrx(0): Option "VendorName" is not used
[  1405.396] (WW) fglrx(0): Option "ModelName" is not used
[  1405.396] (II) fglrx(0): X context handle = 0x2
[  1405.396] (II) fglrx(0): [DRI] installation complete
[  1405.396] (==) fglrx(0): Silken mouse enabled
[  1405.396] (==) fglrx(0): Using HW cursor of display infrastructure!
[  1405.396] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1405.436] (--) RandR disabled
[  1405.439] ukiDynamicMajor: found major device number 251
[  1405.439] ukiDynamicMajor: found major device number 251
[  1405.439] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1405.439] ukiOpenDevice: node name is /dev/ati/card0
[  1405.439] ukiOpenDevice: open result is 14, (OK)
[  1405.439] ukiOpenByBusid: ukiOpenMinor returns 14
[  1405.439] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1405.439] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[  1405.440] ukiDynamicMajor: found major device number 251
[  1405.440] ukiDynamicMajor: found major device number 251
[  1405.440] ukiDynamicMajor: found major device number 251
[  1405.440] ukiOpenDevice: node name is /dev/ati/card0
[  1405.441] ukiOpenDevice: open result is 15, (OK)
[  1405.441] ukiGetBusid returned 'PCI:1:0:0'
[  1405.441] ukiOpenDevice: node name is /dev/ati/card1
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card2
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card3
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card4
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card5
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card6
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card7
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card8
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card9
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card10
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card11
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card12
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card13
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card14
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiOpenDevice: node name is /dev/ati/card15
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: open result is -1, (No such device)
[  1405.441] ukiOpenDevice: Open failed
[  1405.441] ukiDynamicMajor: found major device number 251
[  1405.441] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1405.441] ukiOpenDevice: node name is /dev/ati/card0
[  1405.441] ukiOpenDevice: open result is 15, (OK)
[  1405.441] ukiOpenByBusid: ukiOpenMinor returns 15
[  1405.441] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1405.463] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[  1405.464] ukiDynamicMajor: found major device number 251
[  1405.464] ukiDynamicMajor: found major device number 251
[  1405.464] ukiDynamicMajor: found major device number 251
[  1405.464] ukiOpenDevice: node name is /dev/ati/card0
[  1405.464] ukiOpenDevice: open result is 16, (OK)
[  1405.464] ukiGetBusid returned 'PCI:1:0:0'
[  1405.464] ukiOpenDevice: node name is /dev/ati/card1
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card2
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card3
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card4
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card5
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card6
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card7
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card8
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card9
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card10
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card11
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card12
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card13
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card14
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiOpenDevice: node name is /dev/ati/card15
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: open result is -1, (No such device)
[  1405.464] ukiOpenDevice: Open failed
[  1405.464] ukiDynamicMajor: found major device number 251
[  1405.464] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1405.464] ukiOpenDevice: node name is /dev/ati/card0
[  1405.464] ukiOpenDevice: open result is 16, (OK)
[  1405.464] ukiOpenByBusid: ukiOpenMinor returns 16
[  1405.464] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1405.472] (II) fglrx(0): OverDrive5 Detected!
[  1405.478] (II) fglrx(0): Setting screen physical size to 508 x 285
[  1405.509] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  1405.509] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1405.509] (**) Power Button: Applying InputClass "system-keyboard"
[  1405.509] (II) LoadModule: "evdev"
[  1405.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1405.510] (II) Module evdev: vendor="X.Org Foundation"
[  1405.510] 	compiled for 1.16.0, module version = 2.9.0
[  1405.510] 	Module class: X.Org XInput Driver
[  1405.510] 	ABI class: X.Org XInput driver, version 21.0
[  1405.510] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 17 paused 0
[  1405.510] (II) Using input driver 'evdev' for 'Power Button'
[  1405.510] (**) Power Button: always reports core events
[  1405.510] (**) evdev: Power Button: Device: "/dev/input/event1"
[  1405.511] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1405.511] (--) evdev: Power Button: Found keys
[  1405.511] (II) evdev: Power Button: Configuring as keyboard
[  1405.511] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[  1405.511] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1405.511] (**) Option "xkb_rules" "evdev"
[  1405.511] (**) Option "xkb_model" "pc104"
[  1405.511] (**) Option "xkb_layout" "pt"
[  1405.528] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  1405.528] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1405.528] (**) Power Button: Applying InputClass "system-keyboard"
[  1405.528] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
[  1405.528] (II) Using input driver 'evdev' for 'Power Button'
[  1405.528] (**) Power Button: always reports core events
[  1405.528] (**) evdev: Power Button: Device: "/dev/input/event0"
[  1405.528] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1405.528] (--) evdev: Power Button: Found keys
[  1405.528] (II) evdev: Power Button: Configuring as keyboard
[  1405.528] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[  1405.528] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  1405.528] (**) Option "xkb_rules" "evdev"
[  1405.528] (**) Option "xkb_model" "pc104"
[  1405.528] (**) Option "xkb_layout" "pt"
[  1405.529] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event3)
[  1405.529] (II) No input driver specified, ignoring this device.
[  1405.529] (II) This device may have been added with another device file.
[  1405.529] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/event12)
[  1405.529] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[  1405.530] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 19 paused 0
[  1405.530] (II) Using input driver 'evdev' for 'Logitech USB Gaming Mouse'
[  1405.530] (**) Logitech USB Gaming Mouse: always reports core events
[  1405.530] (**) evdev: Logitech USB Gaming Mouse: Device: "/dev/input/event12"
[  1405.530] (--) evdev: Logitech USB Gaming Mouse: Vendor 0x46d Product 0xc041
[  1405.530] (--) evdev: Logitech USB Gaming Mouse: Found 20 mouse buttons
[  1405.530] (--) evdev: Logitech USB Gaming Mouse: Found scroll wheel(s)
[  1405.530] (--) evdev: Logitech USB Gaming Mouse: Found relative axes
[  1405.530] (--) evdev: Logitech USB Gaming Mouse: Found x and y relative axes
[  1405.530] (II) evdev: Logitech USB Gaming Mouse: Configuring as mouse
[  1405.530] (II) evdev: Logitech USB Gaming Mouse: Adding scrollwheel support
[  1405.530] (**) evdev: Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
[  1405.530] (**) evdev: Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1405.530] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C041.0001/input/input15/event12"
[  1405.530] (II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE, id 8)
[  1405.530] (II) evdev: Logitech USB Gaming Mouse: initialized for relative axes.
[  1405.530] (**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
[  1405.530] (**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
[  1405.530] (**) Logitech USB Gaming Mouse: (accel) acceleration factor: 2.000
[  1405.530] (**) Logitech USB Gaming Mouse: (accel) acceleration threshold: 4
[  1405.531] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/mouse0)
[  1405.531] (II) No input driver specified, ignoring this device.
[  1405.531] (II) This device may have been added with another device file.
[  1405.531] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7)
[  1405.531] (II) No input driver specified, ignoring this device.
[  1405.531] (II) This device may have been added with another device file.
[  1405.531] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[  1405.531] (II) No input driver specified, ignoring this device.
[  1405.531] (II) This device may have been added with another device file.
[  1405.531] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[  1405.531] (II) No input driver specified, ignoring this device.
[  1405.531] (II) This device may have been added with another device file.
[  1405.532] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event10)
[  1405.532] (II) No input driver specified, ignoring this device.
[  1405.532] (II) This device may have been added with another device file.
[  1405.532] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[  1405.532] (II) No input driver specified, ignoring this device.
[  1405.532] (II) This device may have been added with another device file.
[  1405.532] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[  1405.532] (II) No input driver specified, ignoring this device.
[  1405.532] (II) This device may have been added with another device file.
[  1405.532] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[  1405.532] (II) No input driver specified, ignoring this device.
[  1405.532] (II) This device may have been added with another device file.
[  1405.532] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[  1405.532] (II) No input driver specified, ignoring this device.
[  1405.532] (II) This device may have been added with another device file.
[  1405.533] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event13)
[  1405.533] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  1405.533] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[  1405.533] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 20 paused 0
[  1405.533] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[  1405.533] (**) Logitech USB Keyboard: always reports core events
[  1405.533] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event13"
[  1405.533] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31d
[  1405.533] (--) evdev: Logitech USB Keyboard: Found keys
[  1405.533] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[  1405.533] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C31D.0003/input/input16/event13"
[  1405.533] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[  1405.533] (**) Option "xkb_rules" "evdev"
[  1405.533] (**) Option "xkb_model" "pc104"
[  1405.533] (**) Option "xkb_layout" "pt"
[  1405.534] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event14)
[  1405.534] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  1405.534] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[  1405.534] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 21 paused 0
[  1405.534] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[  1405.534] (**) Logitech USB Keyboard: always reports core events
[  1405.534] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event14"
[  1405.534] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31d
[  1405.534] (--) evdev: Logitech USB Keyboard: Found absolute axes
[  1405.534] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[  1405.534] (--) evdev: Logitech USB Keyboard: Found keys
[  1405.534] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[  1405.534] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[  1405.534] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[  1405.534] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:046D:C31D.0004/input/input17/event14"
[  1405.535] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[  1405.535] (**) Option "xkb_rules" "evdev"
[  1405.535] (**) Option "xkb_model" "pc104"
[  1405.535] (**) Option "xkb_layout" "pt"
[  1405.535] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[  1405.535] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[  1405.535] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[  1405.535] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[  1405.535] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[  1405.535] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[  1405.535] (II) No input driver specified, ignoring this device.
[  1405.535] (II) This device may have been added with another device file.
[  1405.538] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[  1405.546] (II) evdev: Logitech USB Keyboard: Close
[  1405.546] (II) UnloadModule: "evdev"
[  1405.546] (II) systemd-logind: releasing fd for 13:78
[  1405.613] (II) evdev: Logitech USB Keyboard: Close
[  1405.613] (II) UnloadModule: "evdev"
[  1405.613] (II) systemd-logind: releasing fd for 13:77
[  1405.676] (II) evdev: Logitech USB Gaming Mouse: Close
[  1405.676] (II) UnloadModule: "evdev"
[  1405.676] (II) systemd-logind: releasing fd for 13:76
[  1405.729] (II) evdev: Power Button: Close
[  1405.730] (II) UnloadModule: "evdev"
[  1405.730] (II) systemd-logind: releasing fd for 13:64
[  1405.756] (II) evdev: Power Button: Close
[  1405.756] (II) UnloadModule: "evdev"
[  1405.756] (II) systemd-logind: releasing fd for 13:65
[  1405.783] (II) fglrx(0): Shutdown CMMQS
[  1405.785] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[  1405.786] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x40000 at 0x7f13b985b000
[  1405.833] (EE) Server terminated successfully (0). Closing log file.

Also:

fglrxinfo shows Error: unable to open display (null)

- it's normall (for catalyst) you need to start X, otherwise it will always show this error

Problem is, I can't start X. It is supposed to start after booting, but it hangs, so the only way I have is to log into tty2 and call startx, which throws me back to tty2 after attempting to start X.

As for the GNOME 3.14 - wish I have more time to look at this closer, I catched problems with GNOME latelly (but before 3.14) - it started to crash before start - I spent not much time on it, but didn't find solution. Fixing it is not that important for me right now, since im planning to install arch on btrfs 2xSSD . Its just the time... Wish I had some kind of clone of myself with shared awareness .
But anyhow I think that GNOME 3.14 support could be real problem atm (at least with unmodified gnome packages), afaik 3.14 is really close to wayland and catalyst doesn't even have egl.

Thanks for the effort anyway, I'm sure people truly appreciate your work.

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

Log looks pretty good. Install acpi(d), maybe it will help. Also was your xorg.conf generated by aticonfig?

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

joaocandre

Member

Registered: 2013-02-23

Posts: 157

Re: The AMD/ATI Bar & Grill

Log looks pretty good. Install acpi(d), maybe it will help. Also was your xorg.conf generated by aticonfig?

Yes, I used aticonfig --initial to generate my xorg.conf. I installed acpi and acpid, the problem persists but there seem to be some changes to the output when I run startx, complaining that xterm was not found, so I guess startx was trying to launch it - weird because I was using GDM+GNOME with xf86-video-ati before installing catalyst, and I installed LightDM in order to use the proprietary drivers (apparently GDM is not supported). Editing the default WM in ~/.xinitrc allows me to get into GNOME with startx, but I can't get it to work on boot - which right now I think might be a LightDM issue.

saronno

Member

Registered: 2009-10-02

Posts: 207

Re: The AMD/ATI Bar & Grill

Vi0l0, just a little question: is it possibile to use radeon and catalyst on the same
machine switching with pxp script?
I have a hd5450 with three head (DVI, VGA and HDMI). From what I knew
only two head can be used at the same time ... but I tried a a Mint Live DVD
using OS radeon driver and it let me use all the outputs simultaneously.
So, I'd like to have a setup with catalyst and radeon. The first if I need
3d acceleration, the second if I need to use a three monitor setup.

At the moment I'm using catalyst-total and I just installed OS driver.
But I think there could be some problems with the libraries ...

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

Sure, look at /usr/bin/pxp_switch_catalyst script, its available on catalyst-test(/total) and catalyst-libgl(split from catalyst-utils). Since its a bash you can easily modify it to your needs (ie when using custom 20-radeon.conf).Basically `pxp_switch_catalyst amd` will switch to catalyst, `pxp_switch_catalyst intel` will switch to open source, so intel or radeon or noveau , last i didnt check actually .
Let my copy from catalyst-test@AUR:

Actually if you didn't mess with your system you should be able to have both oss radeon and catalyst installed and switch between them with my pxp_switch_catalyst script, only reboot is required. It's working well on my system, so should on yours.

pxp_switch_catalyst in a basic way
( so if you don't want to change anything in you system, which means no graphic bootloader modifies [NO nomodeset NOR radeon.modeset=0 flags added, also NO radeon.dpm=1,no vga, no video nor any gfx boot option], and don't have xorg.conf(.d) with radeon inside )
AND if you only have one graphics card AND it is radeon, should work as follows:
- pxp_switch_catalyst amd - this command will switch to catalyst, xorg.conf is set to use fglrx, fglrx is added to modules load, reboot and you are working on catalyst.
Short story: at boot it will load fglrx because its inside modules-load, it will also load radeon module becase we didn't add nomodeset, but Xserver will use fglrx because it's inside xorg.conf, and it should work well.
- pxp_switch_catalyst intel - this command will switch to oss driver, so in our case to radeon (command could misslead, yes, but its because its designed to pxp switch), script removes fglrx from modules-load, and removes xorg.conf, reboot and you are working on oss radeon.
Short story: script removes fglrx from modules-load so it's not loaded, radeon is loaded, xorg.conf doesn't exist so by default xserver is using radeon.

BTW I installed new arch on new drives, and all seems to work fine, GDM didn't start so I used KDM. All problems are gone and GNOME 3.14 works pretty nice.

Last edited by Vi0L0 (2014-10-19 18:48:00)

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

IVIonty

Member

Registered: 2013-02-19

Posts: 23

Re: The AMD/ATI Bar & Grill

BTW I installed new arch on new drives, and all seems to work fine, GDM didn't start so I used KDM. All problems are gone and GNOME 3.14 works pretty nice.

Interesting... so could be a display manager issue... I tried both GDM and LightDM with the same result: GNOME 3.14 crash after login :-)

Last edited by IVIonty (2014-10-19 20:02:59)

---

_______________________________________________________________________
- One may not reach the dawn save by the path of the night -
Kahlil Gibran

joaocandre

Member

Registered: 2013-02-23

Posts: 157

Re: The AMD/ATI Bar & Grill

BTW I installed new arch on new drives, and all seems to work fine, GDM didn't start so I used KDM. All problems are gone and GNOME 3.14 works pretty nice.

Interesting... so could be a display manager issue... I tried both GDM and LightDM with the same result: GNOME 3.14 crash after login :-)

I had a similar experience, ended up with auto-login and startx afterboot. Might give a shot at KDM later, right now it's working as it is.

saronno

Member

Registered: 2009-10-02

Posts: 207

Re: The AMD/ATI Bar & Grill

Sure, look at /usr/bin/pxp_switch_catalyst script, its available on catalyst-test(/total) and catalyst-libgl(split from catalyst-utils). Since its a bash you can easily modify it to your needs (ie when using custom 20-radeon.conf).Basically `pxp_switch_catalyst amd` will switch to catalyst, `pxp_switch_catalyst intel` will switch to open source, so intel or radeon or noveau , last i didnt check actually . .....
.

Everything fine, the script works very well.

                                         Thanks.

PS: Anyway it's ridicolous that Open Source Driver can manage all the ports and catalyst can't.
Shame on AMD.

cassfalg

Member

Registered: 2014-10-21

Posts: 7

Re: The AMD/ATI Bar & Grill

For me it does not work with catalyst and gnome 1.14. Tried gdm and libgdm 1.10 and kdm, did not help. Lots of messages like this:

Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 2, issue_cycle = -1, ready_cycle = 1
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 3, issue_cycle = -1, ready_cycle = 1
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 4, issue_cycle = -1, ready_cycle = 1
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 5, issue_cycle = -1, ready_cycle = 1
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 6, issue_cycle = -1, ready_cycle = 0
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 6, issue_cycle = -1, ready_cycle = 0
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 6, issue_cycle = -1, ready_cycle = 0
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 6X Error of failed request:  BadValue (integer parameter out of range for operation)
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: Major opcode of failed request:  141 (RANDR)
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: Minor opcode of failed request:  13 (RRChangeOutputProperty)
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: Value in failed request:  0x97
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: Serial number of failed request:  276
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: Current serial number in output stream:  278
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: , issue_cycle = -1, ready_cycle = 0
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 7, issue_cycle = -1, ready_cycle = 6
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 8, issue_cycle = -1, ready_cycle = 7
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 2, issue_cycle = -1, ready_cycle = 1
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 3, issue_cycle = -1, ready_cycle = 1
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 2, issue_cycle = -1, ready_cycle = 1
Okt 21 19:10:20 chris-u38n-arch gnome-session[449]: cur_cycle = 3, issue_cycle = -1, ready_cycle = 3

I like gnome. So this is bad. Also, I am using a Asus U38N Laptop, and there are issues with the open source driver - the built-in screen simply stays black. So that is no option... It could be some issues with screen resolution (randr...) , but I don't know... all kinda strange.

schizo-ri

Member

From: Rijeka, Croatia

Registered: 2014-06-01

Posts: 25

Re: The AMD/ATI Bar & Grill

Sorry to bump in so abruptly in middle of Gnome crisis. I have Gnome without gdm (using startx) and XBMC on my living room PC, Gnome is autostarting XBMC. When I set XBMC to put display (it's a plasma TV) to sleep after 5 minutes, the CPU usage goes to 100% (after 5 min). I have read that Catalyst had problem with DPMS. Is that still an issue and if so is there a solution? Should I look somewhere else? XBMC debug log doesn't report any errors. DPMS signal sent and that is it. TV goes blank as it should i suppose. GPU is HD 8470D (A6-6400K APU). Vsync is set to ~"On, unless application says otherwise".

cassfalg

Member

Registered: 2014-10-21

Posts: 7

Re: The AMD/ATI Bar & Grill

All  that "cur_cycle = 3, issue_cycle = -1, ready_cycle = 1" stuff may actually be unrelated to the gnome issues. I've found hints of similar outputs in a flight simulator console out and in minecraft logs using google. They also popped up in the output of wine when I played StarCraft 1. Does anyone have any idea where those might come from (or how  to find out where they're comming from)? The only upside ATM is that in KDE, I can set my screen resolution to 640x480, which means StarCraft can be played fullscreen - previously, in gnome 800x600 was the minimum.

Regardles, "Gnomee crisis" is aptly put... What can be done? Gnome is not exactly easy to downgrade, ( I tried downgrading parts, did not help), and I'm not even sure what the issue really is. The logs are not really all that helpful. I mean there's no real error that I've seen so far. Also, KDE looks different (read ugly in parts), and the usability is quite different.

Ah, I haven't had any issues with dpms or so yet, however.

Last edited by cassfalg (2014-10-21 21:15:07)

IVIonty

Member

Registered: 2013-02-19

Posts: 23

Re: The AMD/ATI Bar & Grill

The issue of incompatibility between GNOME 3.14 and Catalyst (up to 14.9) reported by many peple is quite strange:
it's not only related with GDM, cause me and other people can't start GNOME session with any display manager (neither directly with .xinitrc and startx).
However some other people was able to start it without problems, apparently using catalyst-total from AUR.
We need some addictional information to understand what's going wrong.

---

_______________________________________________________________________
- One may not reach the dawn save by the path of the night -
Kahlil Gibran

Kat

Member

Registered: 2014-08-30

Posts: 3

Re: The AMD/ATI Bar & Grill

Yes this is all quite strange ,well I am confused..
For example,In the past I could NOT use Arch UNLESS,I installed Vi0L0s Catalyst,or GPU fan  would spin Nonstop,couldn't login to Gnome (hangs)
Now all of a sudden,I can use free drivers and Voila no gpu spinning, I can log into Gnome no prob, what the hell is going on?
From what I can tell it has something to do with the new Kernel, Mesa got an update as well Mesa 10.3.2
i am on Ati 6870
I am baffled!
Any ideas?

Last edited by Kat (2014-10-31 02:25:39)

---

Kat

"The general population doesn’t know what’s happening, and it doesn’t even know that it doesn’t know."Noam Chomsky

clfarron4

Member

From: London, UK

Registered: 2013-06-28

Posts: 2,163

Website

Re: The AMD/ATI Bar & Grill

Yes this is all quite strange ,well I am confused..
For example,In the past I could NOT use Arch UNLESS,I installed Vi0L0s Catalyst,or GPU fan  would spin Nonstop,couldn't login to Gnome (hangs)
Now all of a sudden,I can use free drivers and Voila no gpu spinning, I can log into Gnome no prob, what the hell is going on?
From what I can tell it has something to do with the new Kernel, Mesa got an update as well Mesa 10.3.2
i am on Ati 6870
I am baffled!
Any ideas?

There were a load of improvements in the kernel with features for AMD Card, and this Phoronix article lists a few of them.

---

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Kat

Member

Registered: 2014-08-30

Posts: 3

Re: The AMD/ATI Bar & Grill

Yes this is all quite strange ,well I am confused..
For example,In the past I could NOT use Arch UNLESS,I installed Vi0L0s Catalyst,or GPU fan  would spin Nonstop,couldn't login to Gnome (hangs)
Now all of a sudden,I can use free drivers and Voila no gpu spinning, I can log into Gnome no prob, what the hell is going on?
From what I can tell it has something to do with the new Kernel, Mesa got an update as well Mesa 10.3.2
i am on Ati 6870
I am baffled!
Any ideas?

There were a load of improvements in the kernel with features for AMD Card, and this Phoronix article lists a few of them.

Ah cool clfarron4 Much appreciated!! and I was ALL set to buy a new card.
wow I am a happy camper!

---

Kat

"The general population doesn’t know what’s happening, and it doesn’t even know that it doesn’t know."Noam Chomsky

jascha

Member

From: Germany

Registered: 2014-03-26

Posts: 12

Re: The AMD/ATI Bar & Grill

I already messed around with the catalyst-stuff for my new R285 but wasn't able to get it going. I want to start from scratch now and wanted to know if this is the (theoreticaly) correct way to do it:

1. add xorg115 repo
2. install all the xorg stuff
3. download the src from http://catalyst.wirephire.com/tarball/14.30-285/
4. untar it & build package with makepkg -s --asroot
5. install package with pacman
6. 'systemctl enable catalyst-hook' & 'systemctl start catalyst-hook'
7. reboot
8. check with fglrxinfo

Is there another (easier?) way to get the R285 up and running? And what has to be done when support has been merged inmto the main catalyst package? How do I upgrade my system then? Hopefully you can clear my confusion here... Thank you in advance.

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

I finally have more time to look closer at this:

The issue of incompatibility between GNOME 3.14 and Catalyst (up to 14.9) reported by many peple is quite strange:
it's not only related with GDM, cause me and other people can't start GNOME session with any display manager (neither directly with .xinitrc and startx).
However some other people was able to start it without problems, apparently using catalyst-total from AUR.
We need some addictional information to understand what's going wrong.

Well... it seems like I kinda fixed gnome 3.14 problem on my older arch instance (Im not talking about gdm, im pretty sure it won't be resolved anytime soon, just gnome 3.14). BTW this instance is 6 years old, was moved through 3 PCs, 3 disks (and 3 filesystem types), it survided 3 different sysinits and one `rm -rf /lib` "misclick" and is still lightfast. i love arch.
At first I updated all my packages with pacman and cower (gnome-applets, gnome-panel). It didn't help, none of my users was able to login.
.xsession-errors was clean after gnome crash, journalctl -b informed that libnm-gtk.so.0 was missing, so I reinstalled libnm-gtk package.
And it seems to solved my issue - now gnome 3.14 works fine on any account except my main one where its logging (to journalctl) something like:

lis 02 20:09:54 xaos org.gtk.vfs.Daemon[679]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
lis 02 20:09:54 xaos org.a11y.Bus[679]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.

Im sure that I would be able to fix also my main user config, but since im migrating and still missing free time I will just leave it.
Meanwhile I've found that atieventsd.service doesn't work so I will put it on my todo list.
Edit: ah forgot to mention - my older system is working on pkgs from [catalyst] repo atm (and xserv 1.16).

I already messed around with the catalyst-stuff for my new R285 but wasn't able to get it going. (...)

afaik stable catalyst 14.9 supports 285, simply use packages from [catalyst-stable] (or lets say catalyst-total@AUR) and [xorg115] repos.
Also since theres no release notes for ubuntus driver - I would also check it (catalyst-test@AUR or [catalyst] repo).
Edit: ah, you missed:
6,5:

# aticonfig --initial

7,5:
after reboot you may check if fglrx module is loading fine: modprobe fglrx
also: you wont be able to run fglrxinfo without X running

Last edited by Vi0L0 (2014-11-02 20:15:33)

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

jascha

Member

From: Germany

Registered: 2014-03-26

Posts: 12

Re: The AMD/ATI Bar & Grill

@Vi0L0
Ah thank you, didn't know that your repo has r285 by now. If I want to have "bleeding edge" driver, I should use [catalyst], shouldn't I?

€dit: Just tried 'catalyst-test' from AUR. That one definetly doesn't work with R285. Had to "downgrade" back to the special R285-Version. startx and my cinnamon desktop only start with the r285-version... Wasn't able to try out your repo because I have some dependencies that can't be solved that easy. At least for me.

Last edited by jascha (2014-11-02 23:16:41)

daboka

Member

Registered: 2014-08-26

Posts: 7

Re: The AMD/ATI Bar & Grill

@Vi0L0
So the suggested way of making catalyst work on gnome 3.14 is using the [catalyst] repo, xorg 1.16 from official repos, reinstalling libnm-gtk and using a dm different from GDM (or just console login and startx)? The other thing which is still not clear to me, is if i have a laptop with an integrated and a discrete graphics card, do I still need the *-pxp packages, or is PowerXpress already implemented in the main package?

IVIonty

Member

Registered: 2013-02-19

Posts: 23

Re: The AMD/ATI Bar & Grill

I finally have more time to look closer at this:

The issue of incompatibility between GNOME 3.14 and Catalyst (up to 14.9) reported by many peple is quite strange:
it's not only related with GDM, cause me and other people can't start GNOME session with any display manager (neither directly with .xinitrc and startx).
However some other people was able to start it without problems, apparently using catalyst-total from AUR.
We need some addictional information to understand what's going wrong.

Well... it seems like I kinda fixed gnome 3.14 problem on my older arch instance (Im not talking about gdm, im pretty sure it won't be resolved anytime soon, just gnome 3.14). BTW this instance is 6 years old, was moved through 3 PCs, 3 disks (and 3 filesystem types), it survided 3 different sysinits and one `rm -rf /lib` "misclick" and is still lightfast. i love arch.
At first I updated all my packages with pacman and cower (gnome-applets, gnome-panel). It didn't help, none of my users was able to login.
.xsession-errors was clean after gnome crash, journalctl -b informed that libnm-gtk.so.0 was missing, so I reinstalled libnm-gtk package.
And it seems to solved my issue - now gnome 3.14 works fine on any account except my main one where its logging (to journalctl) something like:

lis 02 20:09:54 xaos org.gtk.vfs.Daemon[679]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
lis 02 20:09:54 xaos org.a11y.Bus[679]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.

Im sure that I would be able to fix also my main user config, but since im migrating and still missing free time I will just leave it.
Meanwhile I've found that atieventsd.service doesn't work so I will put it on my todo list.
Edit: ah forgot to mention - my older system is working on pkgs from [catalyst] repo atm (and xserv 1.16).

Thank you very much Vi0l0 for your tests.

I'll try your advices asap, atm I'm using KDE 5 + xfce

---

_______________________________________________________________________
- One may not reach the dawn save by the path of the night -
Kahlil Gibran

10480

Member

Registered: 2014-11-06

Posts: 1

Re: The AMD/ATI Bar & Grill

never mind. Not card related.

Last edited by 10480 (2014-11-06 08:51:41)