You are not logged in.

Pages: 1

#1 2014-10-31 20:31:00

peer
Member
From: Poland
Registered: 2011-05-20
Posts: 11

Update kernel to 3.17 - Black screen under booting

Hi,

I update kernel from 3.16 to 3.17, and when I start booting, see log an after a certain time I get black screen.

I have notebook Asus X200M with intel graphic card.

Booting log:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014
[    0.000000] Command line: initrd=\EFI\archiso\archiso.img archisobasedir=arch archisolabel=ARCH_201409
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b8d36fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8d37000-0x00000000b8d66fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b8d67000-0x00000000b8eb6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8eb7000-0x00000000b93b9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b93ba000-0x00000000b9bacfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9bad000-0x00000000b9badfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9bae000-0x00000000b9beffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9bf0000-0x00000000b9d65fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9d66000-0x00000000b9ff9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xa9461018-0xa9471057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020100000-0x00000000a9461017] usable
[    0.000000] reserve setup_data: [mem 0x00000000a9461018-0x00000000a9471057] usable
[    0.000000] reserve setup_data: [mem 0x00000000a9471058-0x00000000b8d36fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000b8d37000-0x00000000b8d66fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b8d67000-0x00000000b8eb6fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000b8eb7000-0x00000000b93b9fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000b93ba000-0x00000000b9bacfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b9bad000-0x00000000b9badfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000b9bae000-0x00000000b9beffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b9bf0000-0x00000000b9d65fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000b9d66000-0x00000000b9ff9fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xb93a4000  ACPI 2.0=0xb93a4000  SMBIOS=0xb9a96e18 
[    0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[    0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[    0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000008f000) (0MB)
[    0.000000] efi: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[    0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
[    0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[    0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f47000) (15MB)
[    0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f47000-0x0000000020000000) (480MB)
[    0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
[    0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020100000-0x000000007ec2e000) (1515MB)
[    0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007ec2e000-0x0000000080000000) (19MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x000000009a000000) (416MB)
[    0.000000] efi: mem13: type=4, attr=0xf, range=[0x000000009a000000-0x000000009a020000) (0MB)
[    0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000009a020000-0x00000000a9461000) (244MB)
[    0.000000] efi: mem15: type=2, attr=0xf, range=[0x00000000a9461000-0x00000000a9472000) (0MB)
[    0.000000] efi: mem16: type=1, attr=0xf, range=[0x00000000a9472000-0x00000000aa3b9000) (15MB)
[    0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000aa3b9000-0x00000000aa3bc000) (0MB)
[    0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000aa3bc000-0x00000000aa3d3000) (0MB)
[    0.000000] efi: mem19: type=2, attr=0xf, range=[0x00000000aa3d3000-0x00000000aa3d5000) (0MB)
[    0.000000] efi: mem20: type=1, attr=0xf, range=[0x00000000aa3d5000-0x00000000aa3f0000) (0MB)
[    0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000aa3f0000-0x00000000b8737000) (227MB)
[    0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000b8737000-0x00000000b8af2000) (3MB)
[    0.000000] efi: mem23: type=3, attr=0xf, range=[0x00000000b8af2000-0x00000000b8d37000) (2MB)
[    0.000000] efi: mem24: type=0, attr=0xf, range=[0x00000000b8d37000-0x00000000b8d67000) (0MB)
[    0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000b8d67000-0x00000000b8eb7000) (1MB)
[    0.000000] efi: mem26: type=10, attr=0xf, range=[0x00000000b8eb7000-0x00000000b93ba000) (5MB)
[    0.000000] efi: mem27: type=6, attr=0x800000000000000f, range=[0x00000000b93ba000-0x00000000b9b4c000) (7MB)
[    0.000000] efi: mem28: type=5, attr=0x800000000000000f, range=[0x00000000b9b4c000-0x00000000b9bad000) (0MB)
[    0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000b9bad000-0x00000000b9bae000) (0MB)
[    0.000000] efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000b9bae000-0x00000000b9bf0000) (0MB)
[    0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000b9bf0000-0x00000000b9d66000) (1MB)
[    0.000000] efi: mem32: type=6, attr=0x800000000000000f, range=[0x00000000b9d66000-0x00000000b9ffa000) (2MB)
[    0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000b9ffa000-0x00000000ba000000) (0MB)
[    0.000000] efi: mem34: type=7, attr=0xf, range=[0x0000000100000000-0x0000000140000000) (1024MB)
[    0.000000] efi: mem35: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[    0.000000] efi: mem36: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[    0.000000] efi: mem37: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X200MA/X200MA, BIOS X200MA.404 04/04/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BA000000 mask FFE000000 uncachable
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xba000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[    0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[    0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
[    0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[    0.000000]  [mem 0x13c000000-0x13fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20100000-0xb8d36fff]
[    0.000000]  [mem 0x20100000-0x201fffff] page 4k
[    0.000000]  [mem 0x20200000-0xb8bfffff] page 2M
[    0.000000]  [mem 0xb8c00000-0xb8d36fff] page 4k
[    0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
[    0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xb8d67000-0xb8eb6fff]
[    0.000000]  [mem 0xb8d67000-0xb8eb6fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb9bad000-0xb9badfff]
[    0.000000]  [mem 0xb9bad000-0xb9badfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb9bf0000-0xb9d65fff]
[    0.000000]  [mem 0xb9bf0000-0xb9d65fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb9ffa000-0xb9ffffff]
[    0.000000]  [mem 0xb9ffa000-0xb9ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x7ec2e000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000B93A4000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000B93A4080 00008C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000B93B5EE0 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20140424/tbfadt-618)
[    0.000000] ACPI: DSDT 0x00000000B93A41A0 011D3A (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000B93B9F80 000040
[    0.000000] ACPI: APIC 0x00000000B93B5FF0 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000B93B6078 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000B93B60C0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: LPIT 0x00000000B93B6100 000104 (v01 _ASUS_ Notebook 00000003 VLV2 0100000D)
[    0.000000] ACPI: ECDT 0x00000000B93B6208 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: HPET 0x00000000B93B62D0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000B93B6308 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000B93B6A70 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000B93B6D00 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000B93B6E80 000042 (v01 _ASUS_ Notebook 00000000      00000000)
[    0.000000] ACPI: BGRT 0x00000000B93B6EC8 000038 (v00 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MSDM 0x00000000B8D64F98 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fff5000-0x13fff9fff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0008efff]
[    0.000000]   node   0: [mem 0x00090000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20100000-0xb8d36fff]
[    0.000000]   node   0: [mem 0xb8d67000-0xb8eb6fff]
[    0.000000]   node   0: [mem 0xb9bad000-0xb9badfff]
[    0.000000]   node   0: [mem 0xb9bf0000-0xb9d65fff]
[    0.000000]   node   0: [mem 0xb9ffa000-0xb9ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] On node 0 totalpages: 1019552
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11773 pages used for memmap
[    0.000000]   DMA32 zone: 753412 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics stolen memory at 0xbb000000-0xbeffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] res edge lint[0x51])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] res res lint[0xaa])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0xa3])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x70])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 103
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa9461000-0xa9461fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa9471000-0xa9471fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8d37000-0xb8d66fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8eb7000-0xb93b9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb93ba000-0xb9bacfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9bae000-0xb9beffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9d66000-0xb9ff9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86784 r8192 d23808 u524288
[    0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1003598
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\EFI\archiso\archiso.img archisobasedir=arch archisolabel=ARCH_201409
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3677272K/4078208K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 400936K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:8448 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[    0.000000] TSC runs at 2163200 KHz
[    0.000000] lapic_timer_frequency = 277333
[    0.000000] tsc: Detected 2163.200 MHz processor
[    0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4328.66 BogoMIPS (lpj=7210666)
[    0.000044] pid_max: default: 32768 minimum: 301
[    0.000061] ACPI: Core revision 20140424
[    0.029799] ACPI: All ACPI Tables successfully acquired
[    0.031844] Security Framework initialized
[    0.031853] Yama: becoming mindful.
[    0.032325] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.034100] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.034885] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.034901] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.035292] Initializing cgroup subsys memory
[    0.035333] Initializing cgroup subsys devices
[    0.035346] Initializing cgroup subsys freezer
[    0.035352] Initializing cgroup subsys net_cls
[    0.035360] Initializing cgroup subsys blkio
[    0.035395] CPU: Physical Processor ID: 0
[    0.035398] CPU: Processor Core ID: 0
[    0.035404] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.040179] mce: CPU supports 6 MCE banks
[    0.040190] CPU0: Thermal monitoring enabled (TM1)
[    0.040199] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
tlb_flushall_shift: 6
[    0.040321] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[    0.054319] ftrace: allocating 20434 entries in 80 pages
[    0.065409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.098392] smpboot: CPU0: Intel(R) Pentium(R) CPU  N3520  @ 2.16GHz (fam: 06, model: 37, stepping: 03)
[    0.098419] TSC deadline timer enabled
[    0.098452] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.098468] ... version:                3
[    0.098470] ... bit width:              40
[    0.098472] ... generic registers:      2
[    0.098474] ... value mask:             000000ffffffffff
[    0.098476] ... max period:             000000ffffffffff
[    0.098478] ... fixed-purpose events:   3
[    0.098480] ... event mask:             0000000700000003
[    0.121896] x86: Booting SMP configuration:
[    0.121902] .... node  #0, CPUs:      #1
[    0.139857] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.143193]  #2 #3
[    0.182296] x86: Booted up 1 node, 4 CPUs
[    0.182302] smpboot: Total of 4 processors activated (17312.66 BogoMIPS)
[    0.183192] devtmpfs: initialized
[    0.189816] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.189820] PM: Registering ACPI NVS region [mem 0xb8eb7000-0xb93b9fff] (5255168 bytes)
[    0.191745] pinctrl core: initialized pinctrl subsystem
[    0.191811] RTC time: 20:42:53, date: 10/31/14
[    0.191901] NET: Registered protocol family 16
[    0.192122] cpuidle: using governor ladder
[    0.192127] cpuidle: using governor menu
[    0.192195] ACPI: bus type PCI registered
[    0.192199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.192351] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.192356] PCI: not using MMCONFIG
[    0.192358] PCI: Using configuration type 1 for base access
[    0.209690] ACPI: Added _OSI(Module Device)
[    0.209695] ACPI: Added _OSI(Processor Device)
[    0.209697] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.209700] ACPI: Added _OSI(Processor Aggregator Device)
[    0.213766] ACPI : EC: EC description table is found, configuring boot EC
[    0.235995] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.261579] ACPI: Dynamic OEM Table Load:
[    0.261590] ACPI: SSDT 0xFFFF880139648800 00045B (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.262859] ACPI: Dynamic OEM Table Load:
[    0.262869] ACPI: SSDT 0xFFFF880139649000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.286101] ACPI: Dynamic OEM Table Load:
[    0.286109] ACPI: SSDT 0xFFFF880139ACB200 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.295812] ACPI: Dynamic OEM Table Load:
[    0.295821] ACPI: SSDT 0xFFFF8801396240C0 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.310441] ACPI: Interpreter enabled
[    0.310454] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.310463] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.310489] ACPI: (supports S0 S3 S4 S5)
[    0.310493] ACPI: Using IOAPIC for interrupt routing
[    0.310534] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.311446] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.312163] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.321942] ACPI: Power Resource [USBC] (on)
[    0.330436] ACPI: Power Resource [PLPE] (on)
[    0.330733] ACPI: Power Resource [PLPE] (on)
[    0.335104] ACPI: Power Resource [CLK0] (on)
[    0.335182] ACPI: Power Resource [CLK1] (on)
[    0.338894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.338905] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.338985] \_SB_.PCI0:_OSC invalid UUID
[    0.338989] _OSC request data:1 1f 0 
[    0.338996] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.339862] PCI host bridge to bus 0000:00
[    0.339868] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.339872] pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
[    0.339876] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
[    0.339879] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.339883] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.339887] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.339890] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[    0.339894] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0815ffe]
[    0.339906] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.340095] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.340112] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[    0.340124] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.340136] pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
[    0.340329] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[    0.340352] pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]
[    0.340363] pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]
[    0.340374] pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]
[    0.340384] pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]
[    0.340395] pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]
[    0.340405] pci 0000:00:13.0: reg 0x24: [mem 0xd0815000-0xd08157ff]
[    0.340454] pci 0000:00:13.0: PME# supported from D3hot
[    0.340613] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.340635] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit]
[    0.340695] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.340814] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.340900] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.340929] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[    0.340944] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[    0.341048] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.341212] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    0.341238] pci 0000:00:1b.0: reg 0x10: [mem 0xd0810000-0xd0813fff 64bit]
[    0.341311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.341467] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    0.341532] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.341633] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.341704] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[    0.341768] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.341865] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.341939] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[    0.342003] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.342100] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.342181] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.342411] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[    0.342448] pci 0000:00:1f.3: reg 0x10: [mem 0xd0814000-0xd081401f]
[    0.342521] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.342839] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.342968] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[    0.342996] pci 0000:02:00.0: reg 0x10: [mem 0xd0700000-0xd077ffff 64bit]
[    0.343047] pci 0000:02:00.0: reg 0x30: [mem 0xd0780000-0xd078ffff pref]
[    0.343115] pci 0000:02:00.0: supports D1 D2
[    0.343119] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.343175] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.349069] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.349077] pci 0000:00:1c.1:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.349202] pci 0000:03:00.0: [10ec:5286] type 00 class 0xff0000
[    0.349225] pci 0000:03:00.0: reg 0x10: [mem 0xd0600000-0xd060ffff]
[    0.349361] pci 0000:03:00.0: supports D1 D2
[    0.349365] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.349427] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.349509] pci 0000:03:00.2: [10ec:8136] type 00 class 0x020000
[    0.349532] pci 0000:03:00.2: reg 0x10: [io  0xe000-0xe0ff]
[    0.349561] pci 0000:03:00.2: reg 0x18: [mem 0xd0614000-0xd0614fff 64bit]
[    0.349580] pci 0000:03:00.2: reg 0x20: [mem 0xd0610000-0xd0613fff 64bit pref]
[    0.349661] pci 0000:03:00.2: supports D1 D2
[    0.349665] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.355738] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.355744] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.355750] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.356698] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[    0.356818] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.356935] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.357050] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.357165] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.357280] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.357396] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.357512] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.359318] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.359471] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.359689] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.359696] vgaarb: loaded
[    0.359698] vgaarb: bridge control possible 0000:00:02.0
[    0.359824] PCI: Using ACPI for IRQ routing
[    0.365679] PCI: pci_cache_line_size set to 64 bytes
[    0.365734] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.365738] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.365740] e820: reserve RAM buffer [mem 0xa9461018-0xabffffff]
[    0.365743] e820: reserve RAM buffer [mem 0xb8d37000-0xbbffffff]
[    0.365746] e820: reserve RAM buffer [mem 0xb8eb7000-0xbbffffff]
[    0.365749] e820: reserve RAM buffer [mem 0xb9bae000-0xbbffffff]
[    0.365752] e820: reserve RAM buffer [mem 0xb9d66000-0xbbffffff]
[    0.365755] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[    0.365940] NetLabel: Initializing
[    0.365943] NetLabel:  domain hash size = 128
[    0.365945] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.365968] NetLabel:  unlabeled traffic allowed by default
[    0.366034] Switched to clocksource refined-jiffies
[    0.374184] pnp: PnP ACPI init
[    0.374218] ACPI: bus type PNP registered
[    0.374302] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.374554] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.374560] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.374564] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.374568] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.374573] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.374688] system 00:02: [io  0x03f8-0x0411] could not be reserved
[    0.374694] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.374837] pnp 00:03: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.374933] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.375354] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.375359] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.375364] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.375368] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[    0.375372] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
[    0.375376] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.375380] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.375384] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.375388] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.375394] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.376886] pnp: PnP ACPI: found 6 devices
[    0.376889] ACPI: bus type PNP unregistered
[    0.385464] Switched to clocksource acpi_pm
[    0.385504] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.385518] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.385524] pci 0000:00:1c.1:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.385533] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.385537] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.385543] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.385552] pci_bus 0000:00: resource 4 [io  0x0000-0x006f]
[    0.385556] pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7]
[    0.385559] pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
[    0.385563] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    0.385566] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[    0.385570] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[    0.385574] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd0815ffe]
[    0.385578] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff]
[    0.385582] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.385585] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff]
[    0.385634] NET: Registered protocol family 2
[    0.386034] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.386172] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.386319] TCP: Hash tables configured (established 32768 bind 32768)
[    0.386368] TCP: reno registered
[    0.386384] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.386423] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.386554] NET: Registered protocol family 1
[    0.386582] pci 0000:00:02.0: Boot video device
[    0.386878] PCI: CLS 64 bytes, default 64
[    0.386971] Unpacking initramfs...
[    3.798196] Freeing initrd memory: 20296K (ffff88007ec2e000 - ffff880080000000)
[    3.798214] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.798219] software IO TLB [mem 0xa5461000-0xa9461000] (64MB) mapped at [ffff8800a5461000-ffff8800a9460fff]
[    3.798657] Scanning for low memory corruption every 60 seconds
[    3.799231] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    3.799830] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.802497] zbud: loaded
[    3.802768] VFS: Disk quotas dquot_6.5.2
[    3.802834] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.803065] msgmni has been set to 7684
[    3.803159] Key type big_key registered
[    3.803575] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    3.803705] io scheduler noop registered
[    3.803711] io scheduler deadline registered
[    3.803804] io scheduler cfq registered (default)
[    3.804386] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.804416] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.804493] efifb: probing for efifb
[    3.804515] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 1876k, total 1875k
[    3.804518] efifb: mode is 800x600x32, linelength=3200, pages=1
[    3.804520] efifb: scrolling: redraw
[    3.804523] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.807600] Console: switching to colour frame buffer device 100x37
[    3.810507] fb0: EFI VGA frame buffer device
[    3.810524] intel_idle: MWAIT substates: 0x33000020
[    3.810527] intel_idle: v0.4 model 0x37
[    3.810529] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.810913] GHES: HEST is not enabled!
[    3.811063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.831365] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.832332] hpet: number irqs doesn't agree with number of timers
[    3.832373] Linux agpgart interface v0.103
[    3.832472] rtc_cmos 00:00: RTC can wake from S4
[    3.832710] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    3.832742] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    3.832763] Intel P-state driver initializing.
[    3.832782] Intel pstate controlling: cpu 0
[    3.832876] Intel pstate controlling: cpu 1
[    3.832970] Intel pstate controlling: cpu 2
[    3.833076] Intel pstate controlling: cpu 3
[    3.833279] ledtrig-cpu: registered to indicate activity on CPUs
[    3.833991] TCP: cubic registered
[    3.834789] NET: Registered protocol family 10
[    3.835678] NET: Registered protocol family 17
[    3.837271] registered taskstats version 1
[    3.839828]   Magic number: 2:163:752
[    3.839841] tty ttyS3: hash matches
[    3.840028] rtc_cmos 00:00: setting system clock to 2014-10-31 20:42:56 UTC (1414788176)
[    3.840203] PM: Hibernation image not present or could not be loaded.
[    3.842178] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[    3.842183] Write protecting the kernel read-only data: 8192k
[    3.846670] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[    3.848729] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[    3.865722] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    3.868883] systemd-udevd[58]: starting version 216
[    3.887455] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    3.887463] ACPI: Power Button [PWRB]
[    3.887570] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    3.888627] ACPI: Lid Switch [LID]
[    3.888729] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    3.888734] ACPI: Sleep Button [SLPB]
[    3.888823] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.888827] ACPI: Power Button [PWRF]
[    3.892296] sdhci: Secure Digital Host Controller Interface driver
[    3.892301] sdhci: Copyright(c) Pierre Ossman
[    3.902568] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    3.905559] i8042: Detected active multiplexing controller, rev 1.1
[    3.906663] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.906689] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.906694] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.906698] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.906701] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.914328] wmi: Mapper loaded
[    3.918784] ACPI: bus type USB registered
[    3.918835] usbcore: registered new interface driver usbfs
[    3.918867] usbcore: registered new interface driver hub
[    3.918875] rtsx_pci 0000:03:00.0: irq 103 for MSI/MSI-X
[    3.918901] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 103
[    3.918953] usbcore: registered new device driver usb
[    3.919389] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.919409] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
[    3.919726] r8169 0000:03:00.2: irq 104 for MSI/MSI-X
[    3.920037] r8169 0000:03:00.2 eth0: RTL8402 at 0xffffc9000064c000, 10:c3:7b:66:32:b5, XID 04000800 IRQ 104
[    3.920547] SCSI subsystem initialized
[    3.921052] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.921071] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.921487] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.921518] xhci_hcd 0000:00:14.0: irq 105 for MSI/MSI-X
[    3.921976] hub 1-0:1.0: USB hub found
[    3.921995] hub 1-0:1.0: 6 ports detected
[    3.923415] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.923425] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.923770] hub 2-0:1.0: USB hub found
[    3.923785] hub 2-0:1.0: 1 port detected
[    3.925827] libata version 3.00 loaded.
[    3.927536] ahci 0000:00:13.0: version 3.0
[    3.927753] ahci 0000:00:13.0: irq 106 for MSI/MSI-X
[    3.927966] [drm] Initialized drm 1.1.0 20060810
[    3.938420] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[    3.938428] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm apst 
[    3.939052] scsi0 : ahci
[    3.939333] scsi1 : ahci
[    3.939427] ata1: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815100 irq 106
[    3.939430] ata2: DUMMY
[    3.940211] [drm] Memory usable by graphics device = 2048M
[    3.940216] [drm] Replacing VGA console driver
[    3.940221] checking generic (c0000000 1d5000) vs hw (c0000000 10000000)
[    3.940224] fb: switching to inteldrmfb from EFI VGA
[    3.940252] Console: switching to colour dummy device 80x25
[    3.945163] i915 0000:00:02.0: irq 107 for MSI/MSI-X
[    3.945177] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.945180] [drm] Driver supports precise vblank timestamp query.
[    3.986231] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    4.178812] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.265360] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.282149] ata1.00: ATA-8: KINGSTON SV300S37A120G, 525ABBF0, max UDMA/133
[    4.282170] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    4.282186] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.301865] ata1.00: configured for UDMA/133
[    4.302143] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[    4.305528] [drm] VBT doesn't support DRRS
[    4.313905] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    4.314705] sd 0:0:0:0: [sda] Write Protect is off
[    4.314710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.314769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.318558]  sda: sda1 sda2 sda3 sda4 sda5
[    4.319762] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.352944] fbcon: inteldrmfb (fb0) is primary device
[    4.656003] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    4.802506] tsc: Refined TSC clocksource calibration: 2166.666 MHz
[    4.833949] hub 1-4:1.0: USB hub found
[    4.834515] hub 1-4:1.0: 3 ports detected
[    4.836858] usb: failed to peer 1-4-port1 and usb2-port1 by location (1-4-port1:none) (usb2-port1:usb1-port1)
[    4.836867] usb 1-4-port1: failed to peer to usb2-port1 (-16)
[    4.836870] usb: port power management may be unreliable
[    4.838038] usb: failed to peer 1-4-port2 and usb2-port1 by location (1-4-port2:none) (usb2-port1:usb1-port1)
[    4.838047] usb 1-4-port2: failed to peer to usb2-port1 (-16)
[    4.839283] usb: failed to peer 1-4-port3 and usb2-port1 by location (1-4-port3:none) (usb2-port1:usb1-port1)
[    4.839292] usb 1-4-port3: failed to peer to usb2-port1 (-16)
[    5.106630] usb 1-4.1: new full-speed USB device number 4 using xhci_hcd
[    5.260234] usb 1-4.2: new high-speed USB device number 5 using xhci_hcd
[    5.352708] usb-storage 1-4.2:1.0: USB Mass Storage device detected
[    5.354630] scsi2 : usb-storage 1-4.2:1.0
[    5.355157] usbcore: registered new interface driver usb-storage
[    5.358066] usbcore: registered new interface driver uas
[    5.804227] Switched to clocksource tsc
[    5.996975] Console: switching to colour frame buffer device 170x48
[    6.023343] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.023358] i915 0000:00:02.0: registered panic notifier
[    6.092491] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.127628] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    6.127865] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.347180] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    6.358480] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     8.02 PQ: 0 ANSI: 0 CCS
[    6.360601] sd 2:0:0:0: [sdb] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB)
[    6.361027] sd 2:0:0:0: [sdb] Write Protect is off
[    6.361050] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
[    6.361491] sd 2:0:0:0: [sdb] No Caching mode page found
[    6.361741] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    6.370486]  sdb: sdb1 sdb2
[    6.374072] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    6.585273] ISO 9660 Extensions: RRIP_1991A
[    6.604648] loop: module loaded
[    6.669200] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    6.699504] device-mapper: uevent: version 1.0.3
[    6.699820] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    6.761101] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
[    7.249501] efivars: duplicate variable: AcpiGlobalVariable-c020489e-6db2-4ef2-9aa5-ca06fc11d36a
[    7.261555] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[    7.262617] systemd[1]: Detected architecture 'x86-64'.
[    7.301337] systemd[1]: Set hostname to <archiso>.
[    7.301524] systemd[1]: Initializing machine ID from random generator.
[    7.625350] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.625510] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.625540] systemd[1]: Starting Remote File Systems.
[    7.625765] systemd[1]: Reached target Remote File Systems.
[    7.625796] systemd[1]: Starting Encrypted Volumes.
[    7.625970] systemd[1]: Reached target Encrypted Volumes.
[    7.626024] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.626109] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.626135] systemd[1]: Starting Paths.
[    7.626295] systemd[1]: Reached target Paths.
[    7.626380] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.626764] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.626798] systemd[1]: Starting Swap.
[    7.626957] systemd[1]: Reached target Swap.
[    7.626985] systemd[1]: Starting Root Slice.
[    7.647934] systemd[1]: Created slice Root Slice.
[    7.647965] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.648331] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.648355] systemd[1]: Starting Delayed Shutdown Socket.
[    7.648535] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.648558] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    7.648749] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.648771] systemd[1]: Starting Journal Socket (/dev/log).
[    7.648960] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.648983] systemd[1]: Starting LVM2 metadata daemon socket.
[    7.649165] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.649199] systemd[1]: Starting udev Kernel Socket.
[    7.649365] systemd[1]: Listening on udev Kernel Socket.
[    7.649397] systemd[1]: Starting udev Control Socket.
[    7.649567] systemd[1]: Listening on udev Control Socket.
[    7.649590] systemd[1]: Starting User and Session Slice.
[    7.650145] systemd[1]: Created slice User and Session Slice.
[    7.650179] systemd[1]: Starting Journal Socket.
[    7.650370] systemd[1]: Listening on Journal Socket.
[    7.650417] systemd[1]: Starting System Slice.
[    7.650925] systemd[1]: Created slice System Slice.
[    7.662478] systemd[1]: Started Set Up Additional Binary Formats.
[    7.662529] systemd[1]: Mounting Huge Pages File System...
[    7.663922] systemd[1]: Starting Load Kernel Modules...
[    7.665094] systemd[1]: Starting udev Coldplug all Devices...
[    7.666141] systemd[1]: Starting Setup Virtual Console...
[    7.667202] systemd[1]: Mounting POSIX Message Queue File System...
[    7.738374] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.740716] systemd[1]: Mounting Debug File System...
[    7.742925] systemd[1]: Starting system-getty.slice.
[    7.744791] systemd[1]: Created slice system-getty.slice.
[    7.744825] systemd[1]: Starting Journal Service...
[    7.748641] systemd[1]: Started Journal Service.
[    8.073656] random: nonblocking pool is initialized
[    8.186980] FS-Cache: Loaded
[    8.258509] RPC: Registered named UNIX socket transport module.
[    8.258516] RPC: Registered udp transport module.
[    8.258546] RPC: Registered tcp transport module.
[    8.258551] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.451188] FS-Cache: Netfs 'nfs' registered for caching
[    8.753221] systemd-journald[175]: Received request to flush runtime journal from PID 1
[    9.115001] systemd-udevd[213]: starting version 216
[    9.796902] ACPI: AC Adapter [AC0] (on-line)
[    9.883837] hidraw: raw HID events driver (C) Jiri Kosina
[    9.889691] ACPI: Battery Slot [BAT0] (battery present)
[    9.891267] thermal LNXTHERM:00: registered as thermal_zone0
[    9.891268] ACPI: Thermal Zone [THRM] (0 C)
[    9.963438] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[    9.963449] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.964519] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[    9.964525] mei_txe 0000:00:1a.0: PCI INT A: no GSI
[    9.964590] mei_txe 0000:00:1a.0: irq 108 for MSI/MSI-X
[   10.141120] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   10.174886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.200306] systemd-udevd[228]: renamed network interface eth0 to enp3s0f2
[   10.241618] media: Linux media interface: v0.10
[   10.242057] microcode: CPU0 sig=0x30673, pf=0x8, revision=0x320
[   10.332225] systemd-journald[175]: Received request to flush runtime journal from PID 1
[   10.340831] Linux video capture interface: v2.00
[   10.356019] iTCO_vendor_support: vendor-support=0
[   10.405092] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.405174] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[   10.405434] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.422683] microcode: CPU1 sig=0x30673, pf=0x8, revision=0x320
[   10.422740] microcode: CPU2 sig=0x30673, pf=0x8, revision=0x320
[   10.422840] microcode: CPU3 sig=0x30673, pf=0x8, revision=0x320
[   10.422970] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.429277] Bluetooth: Core ver 2.19
[   10.429308] NET: Registered protocol family 31
[   10.429311] Bluetooth: HCI device and connection manager initialized
[   10.429322] Bluetooth: HCI socket layer initialized
[   10.429326] Bluetooth: L2CAP socket layer initialized
[   10.429339] Bluetooth: SCO socket layer initialized
[   10.545328] asus_wmi: ASUS WMI generic driver loaded
[   10.555713] usbcore: registered new interface driver btusb
[   10.568780] asus_wmi: Initialization: 0x1
[   10.568880] asus_wmi: BIOS WMI version: 7.9
[   10.568996] asus_wmi: SFUN value: 0x4a0877
[   10.571556] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input15
[   10.607024] asus_wmi: Backlight controlled by ACPI video driver
[   10.619927] cfg80211: Calling CRDA to update world regulatory domain
[   10.620046] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b424)
[   10.621588] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input16
[   10.621725] usbcore: registered new interface driver uvcvideo
[   10.621728] USB Video Class driver (1.1.1)
[   10.623479] snd_hda_intel 0000:00:1b.0: irq 109 for MSI/MSI-X
[   10.829115] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.829123] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.829126] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.829129] sound hdaudioC0D0:    mono: mono_out=0x0
[   10.829132] sound hdaudioC0D0:    inputs:
[   10.829136] sound hdaudioC0D0:      Mic=0x1b
[   10.912319] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   10.912449] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   10.929663] intel_soc_dts_thermal: request_threaded_irq ret -22
[   10.938823] ath: phy0: WB335 2-ANT card detected
[   10.938829] ath: phy0: Set BT/WLAN RX diversity capability
[   10.947885] cfg80211: World regulatory domain updated:
[   10.947892] cfg80211:  DFS Master region: unset
[   10.947894] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.947898] cfg80211:   (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[   10.947901] cfg80211:   (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[   10.947904] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.947907] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[   10.947910] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.947913] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.947915] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.947918] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.948016] ath: phy0: Enable LNA combining
[   10.949134] ath: phy0: ASPM enabled: 0x42
[   10.949138] ath: EEPROM regdomain: 0x60
[   10.949139] ath: EEPROM indicates we should expect a direct regpair map
[   10.949143] ath: Country alpha2 being used: 00
[   10.949145] ath: Regpair used: 0x60
[   10.949212] intel_rapl: RAPL domain uncore detection failed
[   10.949220] intel_rapl: RAPL domain dram detection failed
[   11.012452] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.012826] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90022480000, irq=17
[   11.038314] systemd-udevd[216]: renamed network interface wlan0 to wlp2s0
[   12.184211] r8169 0000:03:00.2 enp3s0f2: link down
[   12.184241] r8169 0000:03:00.2 enp3s0f2: link down
[   12.184263] IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
[   13.309766] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input14
[   13.313404] mousedev: PS/2 mouse device common for all mice
[   13.775732] r8169 0000:03:00.2 enp3s0f2: link up
[   13.775767] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f2: link becomes ready
[  173.542337] EXT4-fs (sda5): recovery complete
[  173.545042] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)

It seems that after this line screen turn off:

fb: switching to inteldrmfb from EFI VGA

Last edited by peer (2014-10-31 20:50:24)

Offline

#2 2014-10-31 20:39:47

majewsky
Member
Registered: 2014-10-31
Posts: 8

Re: Update kernel to 3.17 - Black screen under booting

I'm seeing a similar problem with the 3.17 update on an Asus Zenbook UX31A (Intel HD 4000 graphics).

I narrowed it down to the screen blacking out once my window manager (KDM) tries to enable compositing. I cannot access any ttys after this, so this looks like a driver issue (KMS?). Maybe you could check if we're having the same problem.

As a result of this error, I'm currently ignoring *mesa*, *libva* and *linux* in pacman -Syu. Does a downgrade to the 3.16 kernel and the older mesa and libva packages help for you?

Offline

#3 2014-10-31 20:53:37

peer
Member
From: Poland
Registered: 2011-05-20
Posts: 11

Re: Update kernel to 3.17 - Black screen under booting

Maybe I will make downgrade in future.

Offline

#4 2014-11-04 08:37:09

majewsky
Member
Registered: 2014-10-31
Posts: 8

Re: Update kernel to 3.17 - Black screen under booting

Any update, peer?

Since I can reliably reproduce this error by disabling the kdm.service and then starting it manually, I tried to look into some logs, but neither `dmesg` nor `journalctl -f` reveal anything of interest.

Anyone got an idea what else I could check?

Offline

#5 2014-11-08 06:30:21

lembang
Member
Registered: 2014-02-24
Posts: 6

Re: Update kernel to 3.17 - Black screen under booting

I use asus X200MA and yes same result, I downgraded to kernel 3.16.6
I had already add i915 module to the mkinitcpio.conf and seems just reach lxdm and thats it...

Offline

#6 2014-11-08 11:51:01

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,163
Website

Re: Update kernel to 3.17 - Black screen under booting

Question: Might this be an Intel Processor that is affected by the Intel Microcode Update that was posted on the news page?

Some quick reading makes me believe it is. If so, have you applied the update?

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#7 2014-11-08 13:37:24

majewsky
Member
Registered: 2014-10-31
Posts: 8

Re: Update kernel to 3.17 - Black screen under booting

Yes, I have applied the microcode update before I tried to upgrade to 3.17 for the first time.

Offline

#8 2014-11-08 15:06:04

glenb77
Member
Registered: 2014-10-02
Posts: 68

Re: Update kernel to 3.17 - Black screen under booting

I have a x200ma using btrfs, on 3.17 the laptop froze after a few seconds. I installed linux-mainline with the 3.18 kernel and everything ran well again.

Offline

#9 2014-11-09 16:37:33

Greed1sGood
Member
Registered: 2012-02-11
Posts: 44

Re: Update kernel to 3.17 - Black screen under booting

Got the same problem twice when I've tried to update the kernel to 3.17.1 and 3.17.2, downgrading to 3.16.4 solved the problem.
I'm running on Samsung series 7 ultra np740u3e.

Offline

#10 2014-11-09 18:13:44

majewsky
Member
Registered: 2014-10-31
Posts: 8

Re: Update kernel to 3.17 - Black screen under booting

Is there any related bugreport yet anywhere? I would file a bugreport, but I don't know where to file it (against the kernel, Mesa, KWin, etc.). Any idea for other logs to check for useful hints?

Offline

#11 2014-11-09 19:45:30

Potomac
Member
Registered: 2011-12-25
Posts: 528

Re: Update kernel to 3.17 - Black screen under booting

check these bugreports :

https://bugs.archlinux.org/task/42505

https://bugs.archlinux.org/task/42353

it seems that this bug related to i915 chip ( or intel graphic card ) is fixed in kernel 3.18rc3 mainline ( we can find this kernel package in AUR )

there is also another and complete different bug when we use a kernel 3.17 and even 3.18 ( it's a random bug ) but with a similar effect : boot can hang ( the boot process suddenly stops ) :

https://bbs.archlinux.org/viewtopic.php?id=189622

https://bbs.archlinux.org/viewtopic.php?id=189324

downgrading to kernel 3.16.x is the workaround

Last edited by Potomac (2014-11-09 19:49:34)

Offline

#12 2014-11-09 20:16:44

peer
Member
From: Poland
Registered: 2011-05-20
Posts: 11

Re: Update kernel to 3.17 - Black screen under booting

I install linux-lts and also help.

Offline

#13 2014-11-10 04:24:56

Ledti
Member
Registered: 2010-07-31
Posts: 122
Website

Re: Update kernel to 3.17 - Black screen under booting

Potomac wrote:

check these bugreports :

https://bugs.archlinux.org/task/42505

https://bugs.archlinux.org/task/42353

it seems that this bug related to i915 chip ( or intel graphic card ) is fixed in kernel 3.18rc3 mainline ( we can find this kernel package in AUR )

there is also another and complete different bug when we use a kernel 3.17 and even 3.18 ( it's a random bug ) but with a similar effect : boot can hang ( the boot process suddenly stops ) :

https://bbs.archlinux.org/viewtopic.php?id=189622

https://bbs.archlinux.org/viewtopic.php?id=189324

downgrading to kernel 3.16.x is the workaround

I assume my computer is affected by one of these bugs. While I can get to the point where my window manager is loaded, everything almost immediately hangs (but doesn't freeze). Terminal windows become non-responsive and Chromium will refuse input. It's very weird. This happens with both of the 3.17 kernel updates but not in any of the 3.16 releases (including 3.16.7).

This is on an AMD system (cpu/gpu w/ open source driver). Overall 3.17 seems rather buggy.

dotfiles

Offline

Pages: 1

Board footer

Powered by FluxBB