You are not logged in.

Pages: 1

Topic closed

#1 2014-11-15 14:39:57

Sterver
Member
From: Slovakia ZV
Registered: 2014-11-15
Posts: 6
Website

[SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

Hello,

I have a problem with steam.
When I start steam, it fails on "OpenGL GLX extension not supported by display".

[sterver@arch ~]$ steam
Running Steam on arch rolling 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1415758987)
Installing breakpad exception handler for appid(steam)/version(1415758987)
Installing breakpad exception handler for appid(steam)/version(1415758987)
OpenGL GLX extension not supported by displayAssert( Assertion Failed: Fatal Error: OpenGL GLX extension not supported by display ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/Main.cpp:283

Installing breakpad exception handler for appid(steam)/version(1415758987)
Uploading dump (out-of-process) [proxy '']
/tmp/dumps/assert_20141115152801_5.dmp
^C
[sterver@arch ~]$

I've got Intel + Nvidia graphic.


glxinfo output:

[sterver@arch ~]$ glxinfo
name of display: :0.0
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".

Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
[sterver@arch ~]$

What should I do?

I really appreciate any help you can provide.

Last edited by Sterver (2014-11-16 16:25:22)

Offline

#2 2014-11-15 16:29:20

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 12,945

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

you can remove steam from the title, glxinfo shows there are problems with your graphics setup.

post your xorg.0.log please (if you can't find it in /var/log folder , check the wiki for other places the log might be)

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#3 2014-11-15 16:33:27

Sterver
Member
From: Slovakia ZV
Registered: 2014-11-15
Posts: 6
Website

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

Ok, here is Xorg.0.log.

[sterver@arch log]$ cat /var/log/Xorg.0.log
[     4.125] 
X.Org X Server 1.16.2
Release Date: 2014-11-10
[     4.125] X Protocol Version 11, Revision 0
[     4.125] Build Operating System: Linux 3.17.2-1-ARCH x86_64 
[     4.125] Current Operating System: Linux arch 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[     4.125] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=27b1d9ff-0ffe-45da-9c41-4038279633d1 rw quiet
[     4.125] Build Date: 10 November 2014  07:52:13PM
[     4.125]  
[     4.125] Current version of pixman: 0.32.6
[     4.125] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     4.125] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.125] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 15 10:48:19 2014
[     4.132] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     4.132] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.134] (==) No Layout section.  Using the first Screen section.
[     4.134] (==) No screen section available. Using defaults.
[     4.134] (**) |-->Screen "Default Screen Section" (0)
[     4.134] (**) |   |-->Monitor "<default monitor>"
[     4.134] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     4.134] (==) Automatically adding devices
[     4.134] (==) Automatically enabling devices
[     4.134] (==) Automatically adding GPU devices
[     4.157] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     4.157] 	Entry deleted from font path.
[     4.157] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     4.157] 	Entry deleted from font path.
[     4.157] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     4.157] 	Entry deleted from font path.
[     4.157] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     4.157] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     4.157] 	Entry deleted from font path.
[     4.157] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     4.157] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[     4.157] (==) ModulePath set to "/usr/lib/xorg/modules"
[     4.157] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     4.158] (II) Loader magic: 0x818d80
[     4.158] (II) Module ABI versions:
[     4.158] 	X.Org ANSI C Emulation: 0.4
[     4.158] 	X.Org Video Driver: 18.0
[     4.158] 	X.Org XInput driver : 21.0
[     4.158] 	X.Org Server Extension : 8.0
[     4.158] (EE) systemd-logind: failed to get session: PID 281 does not belong to any known session
[     4.158] (II) xfree86: Adding drm device (/dev/dri/card1)
[     4.158] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.159] (--) PCI:*(0:0:2:0) 8086:0416:17aa:3803 rev 6, Mem @ 0xd1000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[     4.159] (--) PCI: (0:1:0:0) 10de:1140:17aa:3803 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     4.159] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     4.160] (II) LoadModule: "glx"
[     4.162] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.342] (II) Module glx: vendor="NVIDIA Corporation"
[     4.342] 	compiled for 4.0.2, module version = 1.0.0
[     4.342] 	Module class: X.Org Server Extension
[     4.343] (II) NVIDIA GLX Module  343.22  Thu Sep 11 15:55:13 PDT 2014
[     4.344] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[     4.344] 	loading driver: nvidia
[     4.344] (==) Matched intel as autoconfigured driver 0
[     4.344] (==) Matched nvidia as autoconfigured driver 1
[     4.344] (==) Matched nouveau as autoconfigured driver 2
[     4.344] (==) Matched nvidia as autoconfigured driver 3
[     4.344] (==) Matched nv as autoconfigured driver 4
[     4.344] (==) Matched intel as autoconfigured driver 5
[     4.344] (==) Matched modesetting as autoconfigured driver 6
[     4.344] (==) Matched fbdev as autoconfigured driver 7
[     4.344] (==) Matched vesa as autoconfigured driver 8
[     4.344] (==) Assigned the driver to the xf86ConfigLayout
[     4.344] (II) LoadModule: "intel"
[     4.350] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     4.368] (II) Module intel: vendor="X.Org Foundation"
[     4.368] 	compiled for 1.16.1, module version = 2.99.916
[     4.368] 	Module class: X.Org Video Driver
[     4.368] 	ABI class: X.Org Video Driver, version 18.0
[     4.368] (II) LoadModule: "nvidia"
[     4.368] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     4.380] (II) Module nvidia: vendor="NVIDIA Corporation"
[     4.380] 	compiled for 4.0.2, module version = 1.0.0
[     4.380] 	Module class: X.Org Video Driver
[     4.382] (II) LoadModule: "nouveau"
[     4.382] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     4.385] (II) Module nouveau: vendor="X.Org Foundation"
[     4.385] 	compiled for 1.16.1, module version = 1.0.11
[     4.385] 	Module class: X.Org Video Driver
[     4.385] 	ABI class: X.Org Video Driver, version 18.0
[     4.385] (II) LoadModule: "nv"
[     4.386] (WW) Warning, couldn't open module nv
[     4.386] (II) UnloadModule: "nv"
[     4.386] (II) Unloading nv
[     4.386] (EE) Failed to load module "nv" (module does not exist, 0)
[     4.386] (II) LoadModule: "modesetting"
[     4.387] (WW) Warning, couldn't open module modesetting
[     4.387] (II) UnloadModule: "modesetting"
[     4.387] (II) Unloading modesetting
[     4.387] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     4.387] (II) LoadModule: "fbdev"
[     4.387] (WW) Warning, couldn't open module fbdev
[     4.387] (II) UnloadModule: "fbdev"
[     4.387] (II) Unloading fbdev
[     4.387] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     4.387] (II) LoadModule: "vesa"
[     4.387] (WW) Warning, couldn't open module vesa
[     4.387] (II) UnloadModule: "vesa"
[     4.387] (II) Unloading vesa
[     4.387] (EE) Failed to load module "vesa" (module does not exist, 0)
[     4.387] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     4.387] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     4.387] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     4.387] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     4.387] (II) NVIDIA dlloader X Driver  343.22  Thu Sep 11 15:34:47 PDT 2014
[     4.387] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     4.388] (II) NOUVEAU driver 
[     4.388] (II) NOUVEAU driver for NVIDIA chipset families :
[     4.388] 	RIVA TNT        (NV04)
[     4.388] 	RIVA TNT2       (NV05)
[     4.388] 	GeForce 256     (NV10)
[     4.388] 	GeForce 2       (NV11, NV15)
[     4.388] 	GeForce 4MX     (NV17, NV18)
[     4.388] 	GeForce 3       (NV20)
[     4.388] 	GeForce 4Ti     (NV25, NV28)
[     4.388] 	GeForce FX      (NV3x)
[     4.388] 	GeForce 6       (NV4x)
[     4.388] 	GeForce 7       (G7x)
[     4.388] 	GeForce 8       (G8x)
[     4.388] 	GeForce GTX 200 (NVA0)
[     4.388] 	GeForce GTX 400 (NVC0)
[     4.388] (++) using VT number 1

[     4.389] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[     4.391] (EE) [drm] KMS not enabled
[     4.392] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[     4.392] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[     4.392] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     4.392] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     4.392] (==) intel(0): RGB weight 888
[     4.392] (==) intel(0): Default visual is TrueColor
[     4.392] (II) intel(0): Output eDP1 has no monitor section
[     4.392] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     4.392] (II) intel(0): Enabled output eDP1
[     4.392] (II) intel(0): Output VGA1 has no monitor section
[     4.392] (II) intel(0): Enabled output VGA1
[     4.392] (II) intel(0): Output HDMI1 has no monitor section
[     4.392] (II) intel(0): Enabled output HDMI1
[     4.392] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     4.392] (II) intel(0): Output VIRTUAL1 has no monitor section
[     4.392] (II) intel(0): Enabled output VIRTUAL1
[     4.392] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[     4.392] (==) intel(0): TearFree disabled
[     4.392] (==) intel(0): DPI set to (96, 96)
[     4.392] (II) Loading sub module "dri2"
[     4.392] (II) LoadModule: "dri2"
[     4.392] (II) Module "dri2" already built-in
[     4.392] (II) Loading sub module "present"
[     4.392] (II) LoadModule: "present"
[     4.392] (II) Module "present" already built-in
[     4.392] (II) UnloadModule: "nvidia"
[     4.392] (II) Unloading nvidia
[     4.392] (==) Depth 24 pixmap format is 32 bpp
[     4.398] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[     4.398] (==) intel(0): Backing store enabled
[     4.398] (==) intel(0): Silken mouse enabled
[     4.399] (II) intel(0): HW Cursor enabled
[     4.399] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.400] (==) intel(0): DPMS enabled
[     4.400] (II) intel(0): [DRI2] Setup complete
[     4.400] (II) intel(0): [DRI2]   DRI driver: i965
[     4.400] (II) intel(0): [DRI2]   VDPAU driver: i965
[     4.400] (II) intel(0): direct rendering: DRI2 enabled
[     4.400] (II) intel(0): hardware support for Present enabled
[     4.400] (==) intel(0): display hotplug detection enabled
[     4.400] (--) RandR disabled
[     4.422] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[     4.425] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     4.436] (II) intel(0): Setting screen physical size to 423 x 238
[     4.697] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     4.697] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.697] (**) Power Button: Applying InputClass "system-keyboard"
[     4.697] (II) LoadModule: "evdev"
[     4.697] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     4.713] (II) Module evdev: vendor="X.Org Foundation"
[     4.713] 	compiled for 1.16.0, module version = 2.9.0
[     4.713] 	Module class: X.Org XInput Driver
[     4.713] 	ABI class: X.Org XInput driver, version 21.0
[     4.713] (II) Using input driver 'evdev' for 'Power Button'
[     4.713] (**) Power Button: always reports core events
[     4.713] (**) evdev: Power Button: Device: "/dev/input/event2"
[     4.713] (--) evdev: Power Button: Vendor 0 Product 0x1
[     4.713] (--) evdev: Power Button: Found keys
[     4.713] (II) evdev: Power Button: Configuring as keyboard
[     4.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[     4.713] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.713] (**) Option "xkb_rules" "evdev"
[     4.713] (**) Option "xkb_model" "pc104"
[     4.713] (**) Option "xkb_layout" "sk"
[     4.726] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     4.726] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.726] (**) Video Bus: Applying InputClass "system-keyboard"
[     4.726] (II) Using input driver 'evdev' for 'Video Bus'
[     4.726] (**) Video Bus: always reports core events
[     4.726] (**) evdev: Video Bus: Device: "/dev/input/event13"
[     4.726] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     4.726] (--) evdev: Video Bus: Found keys
[     4.726] (II) evdev: Video Bus: Configuring as keyboard
[     4.726] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event13"
[     4.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     4.726] (**) Option "xkb_rules" "evdev"
[     4.726] (**) Option "xkb_model" "pc104"
[     4.726] (**) Option "xkb_layout" "sk"
[     4.726] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[     4.726] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.726] (**) Video Bus: Applying InputClass "system-keyboard"
[     4.726] (II) Using input driver 'evdev' for 'Video Bus'
[     4.726] (**) Video Bus: always reports core events
[     4.726] (**) evdev: Video Bus: Device: "/dev/input/event12"
[     4.726] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     4.726] (--) evdev: Video Bus: Found keys
[     4.726] (II) evdev: Video Bus: Configuring as keyboard
[     4.726] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:00/input/input13/event12"
[     4.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     4.726] (**) Option "xkb_rules" "evdev"
[     4.726] (**) Option "xkb_model" "pc104"
[     4.726] (**) Option "xkb_layout" "sk"
[     4.726] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     4.726] (II) No input driver specified, ignoring this device.
[     4.726] (II) This device may have been added with another device file.
[     4.727] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[     4.727] (II) No input driver specified, ignoring this device.
[     4.727] (II) This device may have been added with another device file.
[     4.727] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[     4.727] (II) No input driver specified, ignoring this device.
[     4.727] (II) This device may have been added with another device file.
[     4.727] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[     4.727] (II) No input driver specified, ignoring this device.
[     4.727] (II) This device may have been added with another device file.
[     4.727] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event9)
[     4.727] (**) COMPANY USB Device: Applying InputClass "evdev keyboard catchall"
[     4.727] (**) COMPANY USB Device: Applying InputClass "system-keyboard"
[     4.727] (II) Using input driver 'evdev' for 'COMPANY USB Device'
[     4.727] (**) COMPANY USB Device: always reports core events
[     4.727] (**) evdev: COMPANY USB Device: Device: "/dev/input/event9"
[     4.727] (--) evdev: COMPANY USB Device: Vendor 0x9da Product 0x71fd
[     4.727] (--) evdev: COMPANY USB Device: Found 1 mouse buttons
[     4.727] (--) evdev: COMPANY USB Device: Found scroll wheel(s)
[     4.727] (--) evdev: COMPANY USB Device: Found relative axes
[     4.727] (--) evdev: COMPANY USB Device: Found absolute axes
[     4.727] (--) evdev: COMPANY USB Device: Found absolute multitouch axes
[     4.727] (--) evdev: COMPANY USB Device: Found x and y absolute axes
[     4.727] (--) evdev: COMPANY USB Device: Found keys
[     4.727] (II) evdev: COMPANY USB Device: Forcing relative x/y axes to exist.
[     4.727] (II) evdev: COMPANY USB Device: Configuring as mouse
[     4.727] (II) evdev: COMPANY USB Device: Configuring as keyboard
[     4.727] (II) evdev: COMPANY USB Device: Adding scrollwheel support
[     4.727] (**) evdev: COMPANY USB Device: YAxisMapping: buttons 4 and 5
[     4.727] (**) evdev: COMPANY USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     4.727] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:09DA:71FD.0001/input/input11/event9"
[     4.727] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: KEYBOARD, id 9)
[     4.727] (**) Option "xkb_rules" "evdev"
[     4.727] (**) Option "xkb_model" "pc104"
[     4.727] (**) Option "xkb_layout" "sk"
[     4.727] (II) evdev: COMPANY USB Device: initialized for relative axes.
[     4.727] (WW) evdev: COMPANY USB Device: ignoring absolute axes.
[     4.727] (**) COMPANY USB Device: (accel) keeping acceleration scheme 1
[     4.727] (**) COMPANY USB Device: (accel) acceleration profile 0
[     4.727] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[     4.727] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[     4.728] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/js0)
[     4.728] (**) COMPANY USB Device: Applying InputClass "system-keyboard"
[     4.728] (II) No input driver specified, ignoring this device.
[     4.728] (II) This device may have been added with another device file.
[     4.728] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event10)
[     4.728] (**) COMPANY USB Device: Applying InputClass "evdev pointer catchall"
[     4.728] (II) Using input driver 'evdev' for 'COMPANY USB Device'
[     4.728] (**) COMPANY USB Device: always reports core events
[     4.728] (**) evdev: COMPANY USB Device: Device: "/dev/input/event10"
[     4.728] (--) evdev: COMPANY USB Device: Vendor 0x9da Product 0x71fd
[     4.728] (--) evdev: COMPANY USB Device: Found 12 mouse buttons
[     4.728] (--) evdev: COMPANY USB Device: Found scroll wheel(s)
[     4.728] (--) evdev: COMPANY USB Device: Found relative axes
[     4.728] (--) evdev: COMPANY USB Device: Found x and y relative axes
[     4.728] (II) evdev: COMPANY USB Device: Configuring as mouse
[     4.728] (II) evdev: COMPANY USB Device: Adding scrollwheel support
[     4.728] (**) evdev: COMPANY USB Device: YAxisMapping: buttons 4 and 5
[     4.728] (**) evdev: COMPANY USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     4.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:09DA:71FD.0002/input/input12/event10"
[     4.728] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: MOUSE, id 10)
[     4.728] (II) evdev: COMPANY USB Device: initialized for relative axes.
[     4.728] (**) COMPANY USB Device: (accel) keeping acceleration scheme 1
[     4.728] (**) COMPANY USB Device: (accel) acceleration profile 0
[     4.728] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[     4.728] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[     4.728] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/mouse0)
[     4.728] (II) No input driver specified, ignoring this device.
[     4.728] (II) This device may have been added with another device file.
[     4.728] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event8)
[     4.728] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[     4.728] (**) Lenovo EasyCamera: Applying InputClass "system-keyboard"
[     4.728] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[     4.728] (**) Lenovo EasyCamera: always reports core events
[     4.728] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event8"
[     4.728] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x295
[     4.728] (--) evdev: Lenovo EasyCamera: Found keys
[     4.728] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[     4.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input10/event8"
[     4.728] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[     4.728] (**) Option "xkb_rules" "evdev"
[     4.728] (**) Option "xkb_model" "pc104"
[     4.728] (**) Option "xkb_layout" "sk"
[     4.729] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[     4.729] (II) No input driver specified, ignoring this device.
[     4.729] (II) This device may have been added with another device file.
[     4.729] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5)
[     4.729] (II) No input driver specified, ignoring this device.
[     4.729] (II) This device may have been added with another device file.
[     4.729] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event6)
[     4.729] (II) No input driver specified, ignoring this device.
[     4.729] (II) This device may have been added with another device file.
[     4.729] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event3)
[     4.729] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[     4.729] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[     4.729] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[     4.729] (**) Ideapad extra buttons: always reports core events
[     4.729] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event3"
[     4.729] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[     4.729] (--) evdev: Ideapad extra buttons: Found keys
[     4.729] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[     4.729] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7/event3"
[     4.729] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[     4.729] (**) Option "xkb_rules" "evdev"
[     4.729] (**) Option "xkb_model" "pc104"
[     4.729] (**) Option "xkb_layout" "sk"
[     4.729] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     4.729] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     4.729] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     4.729] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     4.729] (**) AT Translated Set 2 keyboard: always reports core events
[     4.729] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     4.729] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     4.729] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     4.729] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     4.729] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     4.729] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[     4.729] (**) Option "xkb_rules" "evdev"
[     4.729] (**) Option "xkb_model" "pc104"
[     4.729] (**) Option "xkb_layout" "sk"
[     4.730] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event11)
[     4.730] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[     4.730] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     4.730] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[     4.730] (II) LoadModule: "synaptics"
[     4.730] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     4.737] (II) Module synaptics: vendor="X.Org Foundation"
[     4.737] 	compiled for 1.16.0, module version = 1.8.1
[     4.737] 	Module class: X.Org XInput Driver
[     4.737] 	ABI class: X.Org XInput driver, version 21.0
[     4.737] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[     4.737] (**) ETPS/2 Elantech Touchpad: always reports core events
[     4.737] (**) Option "Device" "/dev/input/event11"
[     4.863] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940 (res 0)
[     4.863] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1260 (res 0)
[     4.863] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[     4.863] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[     4.863] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[     4.863] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[     4.863] (**) Option "TapButton1" "1"
[     4.863] (**) Option "TapButton2" "2"
[     4.863] (**) Option "TapButton3" "3"
[     4.863] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     4.863] (**) ETPS/2 Elantech Touchpad: always reports core events
[     4.916] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event11"
[     4.916] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[     4.916] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     4.916] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[     4.916] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.063
[     4.917] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[     4.917] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[     4.917] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[     4.917] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[     4.917] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     4.917] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[     4.917] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     4.917] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     4.917] (II) No input driver specified, ignoring this device.
[     4.917] (II) This device may have been added with another device file.
[    29.920] (II) intel(0): EDID vendor "CMN", prod id 5928
[    29.920] (II) intel(0): Printing DDC gathered Modelines:
[    29.920] (II) intel(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1940  900 903 908 926 +hsync -vsync (55.6 kHz eP)
[  2005.700] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event17)
[  2005.700] (II) No input driver specified, ignoring this device.
[  2005.700] (II) This device may have been added with another device file.
[sterver@arch log]$

Offline

#4 2014-11-15 16:49:01

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 12,945

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

[     4.387] (II) NVIDIA dlloader X Driver  343.22  Thu Sep 11 15:34:47 PDT 2014
[     4.387] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     4.388] (II) NOUVEAU driver 
[     4.388] (II) NOUVEAU driver for NVIDIA chipset families :

Looks like you got a clash between nvidia and nouveau drivers, which one do you want to use ?

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#5 2014-11-15 16:50:51

Sterver
Member
From: Slovakia ZV
Registered: 2014-11-15
Posts: 6
Website

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

I want to use nvidia driver.

I have to uninstall xf86-video-nouveau, haven't I?
Do I need restart after?

Last edited by Sterver (2014-11-15 16:53:47)

Offline

#6 2014-11-15 16:53:36

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 12,945

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

then remove the nouveau driver,

pacman -Rns xf86-video-nouveau should do that, but check thoroughly for any questions pacman asks you, else it may remove to much.

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#7 2014-11-15 16:54:41

Sterver
Member
From: Slovakia ZV
Registered: 2014-11-15
Posts: 6
Website

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

Ok, I already did it.

//EDIT:
After reboot, still same.

And recent xorg log:

[     6.965] 
X.Org X Server 1.16.2
Release Date: 2014-11-10
[     6.965] X Protocol Version 11, Revision 0
[     6.965] Build Operating System: Linux 3.17.2-1-ARCH x86_64 
[     6.965] Current Operating System: Linux arch 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[     6.965] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=27b1d9ff-0ffe-45da-9c41-4038279633d1 rw quiet
[     6.965] Build Date: 10 November 2014  07:52:13PM
[     6.965]  
[     6.965] Current version of pixman: 0.32.6
[     6.965] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.965] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.965] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 15 19:32:55 2014
[     6.995] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     6.995] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.997] (==) No Layout section.  Using the first Screen section.
[     6.997] (==) No screen section available. Using defaults.
[     6.997] (**) |-->Screen "Default Screen Section" (0)
[     6.997] (**) |   |-->Monitor "<default monitor>"
[     6.998] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     6.998] (==) Automatically adding devices
[     6.998] (==) Automatically enabling devices
[     6.998] (==) Automatically adding GPU devices
[     7.039] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     7.040] 	Entry deleted from font path.
[     7.040] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     7.040] 	Entry deleted from font path.
[     7.040] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     7.041] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     7.041] 	Entry deleted from font path.
[     7.041] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     7.041] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[     7.041] (==) ModulePath set to "/usr/lib/xorg/modules"
[     7.041] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     7.041] (II) Loader magic: 0x818d80
[     7.041] (II) Module ABI versions:
[     7.041] 	X.Org ANSI C Emulation: 0.4
[     7.041] 	X.Org Video Driver: 18.0
[     7.041] 	X.Org XInput driver : 21.0
[     7.041] 	X.Org Server Extension : 8.0
[     7.042] (EE) systemd-logind: failed to get session: PID 428 does not belong to any known session
[     7.042] (II) xfree86: Adding drm device (/dev/dri/card1)
[     7.042] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.043] (--) PCI:*(0:0:2:0) 8086:0416:17aa:3803 rev 6, Mem @ 0xd1000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[     7.043] (--) PCI: (0:1:0:0) 10de:1140:17aa:3803 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     7.043] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     7.043] (II) LoadModule: "glx"
[     7.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     7.330] (II) Module glx: vendor="NVIDIA Corporation"
[     7.330] 	compiled for 4.0.2, module version = 1.0.0
[     7.330] 	Module class: X.Org Server Extension
[     7.332] (II) NVIDIA GLX Module  343.22  Thu Sep 11 15:55:13 PDT 2014
[     7.334] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[     7.334] 	loading driver: nvidia
[     7.334] (==) Matched intel as autoconfigured driver 0
[     7.334] (==) Matched nvidia as autoconfigured driver 1
[     7.334] (==) Matched nouveau as autoconfigured driver 2
[     7.334] (==) Matched nvidia as autoconfigured driver 3
[     7.334] (==) Matched nv as autoconfigured driver 4
[     7.334] (==) Matched intel as autoconfigured driver 5
[     7.334] (==) Matched modesetting as autoconfigured driver 6
[     7.334] (==) Matched fbdev as autoconfigured driver 7
[     7.334] (==) Matched vesa as autoconfigured driver 8
[     7.334] (==) Assigned the driver to the xf86ConfigLayout
[     7.334] (II) LoadModule: "intel"
[     7.345] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     7.359] (II) Module intel: vendor="X.Org Foundation"
[     7.359] 	compiled for 1.16.1, module version = 2.99.916
[     7.359] 	Module class: X.Org Video Driver
[     7.359] 	ABI class: X.Org Video Driver, version 18.0
[     7.359] (II) LoadModule: "nvidia"
[     7.359] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     7.373] (II) Module nvidia: vendor="NVIDIA Corporation"
[     7.373] 	compiled for 4.0.2, module version = 1.0.0
[     7.373] 	Module class: X.Org Video Driver
[     7.374] (II) LoadModule: "nouveau"
[     7.376] (WW) Warning, couldn't open module nouveau
[     7.376] (II) UnloadModule: "nouveau"
[     7.376] (II) Unloading nouveau
[     7.376] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     7.376] (II) LoadModule: "nv"
[     7.376] (WW) Warning, couldn't open module nv
[     7.376] (II) UnloadModule: "nv"
[     7.376] (II) Unloading nv
[     7.376] (EE) Failed to load module "nv" (module does not exist, 0)
[     7.376] (II) LoadModule: "modesetting"
[     7.376] (WW) Warning, couldn't open module modesetting
[     7.376] (II) UnloadModule: "modesetting"
[     7.376] (II) Unloading modesetting
[     7.376] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     7.376] (II) LoadModule: "fbdev"
[     7.376] (WW) Warning, couldn't open module fbdev
[     7.376] (II) UnloadModule: "fbdev"
[     7.376] (II) Unloading fbdev
[     7.376] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     7.376] (II) LoadModule: "vesa"
[     7.376] (WW) Warning, couldn't open module vesa
[     7.376] (II) UnloadModule: "vesa"
[     7.376] (II) Unloading vesa
[     7.376] (EE) Failed to load module "vesa" (module does not exist, 0)
[     7.376] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     7.376] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     7.376] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     7.376] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     7.376] (II) NVIDIA dlloader X Driver  343.22  Thu Sep 11 15:34:47 PDT 2014
[     7.376] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     7.378] (++) using VT number 1

[     7.379] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[     7.383] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[     7.383] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[     7.383] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     7.383] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     7.383] (==) intel(0): RGB weight 888
[     7.383] (==) intel(0): Default visual is TrueColor
[     7.383] (II) intel(0): Output eDP1 has no monitor section
[     7.383] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     7.383] (II) intel(0): Enabled output eDP1
[     7.383] (II) intel(0): Output VGA1 has no monitor section
[     7.383] (II) intel(0): Enabled output VGA1
[     7.383] (II) intel(0): Output HDMI1 has no monitor section
[     7.383] (II) intel(0): Enabled output HDMI1
[     7.383] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     7.383] (II) intel(0): Output VIRTUAL1 has no monitor section
[     7.383] (II) intel(0): Enabled output VIRTUAL1
[     7.383] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[     7.383] (==) intel(0): TearFree disabled
[     7.383] (==) intel(0): DPI set to (96, 96)
[     7.383] (II) Loading sub module "dri2"
[     7.383] (II) LoadModule: "dri2"
[     7.383] (II) Module "dri2" already built-in
[     7.383] (II) Loading sub module "present"
[     7.383] (II) LoadModule: "present"
[     7.383] (II) Module "present" already built-in
[     7.383] (II) UnloadModule: "nvidia"
[     7.383] (II) Unloading nvidia
[     7.383] (==) Depth 24 pixmap format is 32 bpp
[     7.388] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[     7.388] (==) intel(0): Backing store enabled
[     7.388] (==) intel(0): Silken mouse enabled
[     7.389] (II) intel(0): HW Cursor enabled
[     7.390] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     7.390] (==) intel(0): DPMS enabled
[     7.390] (II) intel(0): [DRI2] Setup complete
[     7.390] (II) intel(0): [DRI2]   DRI driver: i965
[     7.390] (II) intel(0): [DRI2]   VDPAU driver: i965
[     7.390] (II) intel(0): direct rendering: DRI2 enabled
[     7.390] (II) intel(0): hardware support for Present enabled
[     7.390] (==) intel(0): display hotplug detection enabled
[     7.390] (--) RandR disabled
[     7.397] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[     7.401] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     7.416] (II) intel(0): Setting screen physical size to 423 x 238
[     8.513] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     8.513] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.513] (**) Power Button: Applying InputClass "system-keyboard"
[     8.513] (II) LoadModule: "evdev"
[     8.513] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     8.557] (II) Module evdev: vendor="X.Org Foundation"
[     8.557] 	compiled for 1.16.0, module version = 2.9.0
[     8.557] 	Module class: X.Org XInput Driver
[     8.557] 	ABI class: X.Org XInput driver, version 21.0
[     8.557] (II) Using input driver 'evdev' for 'Power Button'
[     8.557] (**) Power Button: always reports core events
[     8.557] (**) evdev: Power Button: Device: "/dev/input/event4"
[     8.557] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.557] (--) evdev: Power Button: Found keys
[     8.557] (II) evdev: Power Button: Configuring as keyboard
[     8.557] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[     8.557] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.557] (**) Option "xkb_rules" "evdev"
[     8.557] (**) Option "xkb_model" "pc104"
[     8.557] (**) Option "xkb_layout" "sk"
[     8.572] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     8.572] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.572] (**) Video Bus: Applying InputClass "system-keyboard"
[     8.572] (II) Using input driver 'evdev' for 'Video Bus'
[     8.572] (**) Video Bus: always reports core events
[     8.572] (**) evdev: Video Bus: Device: "/dev/input/event13"
[     8.572] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.572] (--) evdev: Video Bus: Found keys
[     8.572] (II) evdev: Video Bus: Configuring as keyboard
[     8.572] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event13"
[     8.572] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.572] (**) Option "xkb_rules" "evdev"
[     8.572] (**) Option "xkb_model" "pc104"
[     8.572] (**) Option "xkb_layout" "sk"
[     8.572] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[     8.572] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.572] (**) Video Bus: Applying InputClass "system-keyboard"
[     8.572] (II) Using input driver 'evdev' for 'Video Bus'
[     8.572] (**) Video Bus: always reports core events
[     8.572] (**) evdev: Video Bus: Device: "/dev/input/event12"
[     8.572] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.572] (--) evdev: Video Bus: Found keys
[     8.572] (II) evdev: Video Bus: Configuring as keyboard
[     8.572] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:00/input/input13/event12"
[     8.572] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     8.572] (**) Option "xkb_rules" "evdev"
[     8.572] (**) Option "xkb_model" "pc104"
[     8.572] (**) Option "xkb_layout" "sk"
[     8.572] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[     8.572] (II) No input driver specified, ignoring this device.
[     8.572] (II) This device may have been added with another device file.
[     8.573] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[     8.573] (II) No input driver specified, ignoring this device.
[     8.573] (II) This device may have been added with another device file.
[     8.573] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[     8.573] (II) No input driver specified, ignoring this device.
[     8.573] (II) This device may have been added with another device file.
[     8.573] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[     8.573] (II) No input driver specified, ignoring this device.
[     8.573] (II) This device may have been added with another device file.
[     8.573] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event1)
[     8.573] (**) COMPANY USB Device: Applying InputClass "evdev keyboard catchall"
[     8.573] (**) COMPANY USB Device: Applying InputClass "system-keyboard"
[     8.573] (II) Using input driver 'evdev' for 'COMPANY USB Device'
[     8.573] (**) COMPANY USB Device: always reports core events
[     8.573] (**) evdev: COMPANY USB Device: Device: "/dev/input/event1"
[     8.573] (--) evdev: COMPANY USB Device: Vendor 0x9da Product 0x71fd
[     8.573] (--) evdev: COMPANY USB Device: Found 1 mouse buttons
[     8.573] (--) evdev: COMPANY USB Device: Found scroll wheel(s)
[     8.573] (--) evdev: COMPANY USB Device: Found relative axes
[     8.573] (--) evdev: COMPANY USB Device: Found absolute axes
[     8.573] (--) evdev: COMPANY USB Device: Found absolute multitouch axes
[     8.573] (--) evdev: COMPANY USB Device: Found x and y absolute axes
[     8.573] (--) evdev: COMPANY USB Device: Found keys
[     8.573] (II) evdev: COMPANY USB Device: Forcing relative x/y axes to exist.
[     8.573] (II) evdev: COMPANY USB Device: Configuring as mouse
[     8.573] (II) evdev: COMPANY USB Device: Configuring as keyboard
[     8.573] (II) evdev: COMPANY USB Device: Adding scrollwheel support
[     8.573] (**) evdev: COMPANY USB Device: YAxisMapping: buttons 4 and 5
[     8.573] (**) evdev: COMPANY USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.573] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:09DA:71FD.0001/input/input2/event1"
[     8.573] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: KEYBOARD, id 9)
[     8.573] (**) Option "xkb_rules" "evdev"
[     8.573] (**) Option "xkb_model" "pc104"
[     8.573] (**) Option "xkb_layout" "sk"
[     8.574] (II) evdev: COMPANY USB Device: initialized for relative axes.
[     8.574] (WW) evdev: COMPANY USB Device: ignoring absolute axes.
[     8.574] (**) COMPANY USB Device: (accel) keeping acceleration scheme 1
[     8.574] (**) COMPANY USB Device: (accel) acceleration profile 0
[     8.574] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[     8.574] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[     8.574] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/js0)
[     8.574] (**) COMPANY USB Device: Applying InputClass "system-keyboard"
[     8.574] (II) No input driver specified, ignoring this device.
[     8.574] (II) This device may have been added with another device file.
[     8.574] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event2)
[     8.574] (**) COMPANY USB Device: Applying InputClass "evdev pointer catchall"
[     8.574] (II) Using input driver 'evdev' for 'COMPANY USB Device'
[     8.574] (**) COMPANY USB Device: always reports core events
[     8.574] (**) evdev: COMPANY USB Device: Device: "/dev/input/event2"
[     8.574] (--) evdev: COMPANY USB Device: Vendor 0x9da Product 0x71fd
[     8.574] (--) evdev: COMPANY USB Device: Found 12 mouse buttons
[     8.574] (--) evdev: COMPANY USB Device: Found scroll wheel(s)
[     8.574] (--) evdev: COMPANY USB Device: Found relative axes
[     8.574] (--) evdev: COMPANY USB Device: Found x and y relative axes
[     8.574] (II) evdev: COMPANY USB Device: Configuring as mouse
[     8.574] (II) evdev: COMPANY USB Device: Adding scrollwheel support
[     8.574] (**) evdev: COMPANY USB Device: YAxisMapping: buttons 4 and 5
[     8.574] (**) evdev: COMPANY USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.574] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:09DA:71FD.0002/input/input3/event2"
[     8.574] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: MOUSE, id 10)
[     8.574] (II) evdev: COMPANY USB Device: initialized for relative axes.
[     8.574] (**) COMPANY USB Device: (accel) keeping acceleration scheme 1
[     8.574] (**) COMPANY USB Device: (accel) acceleration profile 0
[     8.574] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[     8.574] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[     8.574] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/mouse0)
[     8.574] (II) No input driver specified, ignoring this device.
[     8.574] (II) This device may have been added with another device file.
[     8.575] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event17)
[     8.575] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[     8.575] (**) Lenovo EasyCamera: Applying InputClass "system-keyboard"
[     8.575] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[     8.575] (**) Lenovo EasyCamera: always reports core events
[     8.575] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event17"
[     8.575] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x295
[     8.575] (--) evdev: Lenovo EasyCamera: Found keys
[     8.575] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[     8.575] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18/event17"
[     8.575] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[     8.575] (**) Option "xkb_rules" "evdev"
[     8.575] (**) Option "xkb_model" "pc104"
[     8.575] (**) Option "xkb_layout" "sk"
[     8.575] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[     8.575] (II) No input driver specified, ignoring this device.
[     8.575] (II) This device may have been added with another device file.
[     8.575] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[     8.575] (II) No input driver specified, ignoring this device.
[     8.575] (II) This device may have been added with another device file.
[     8.575] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[     8.575] (II) No input driver specified, ignoring this device.
[     8.575] (II) This device may have been added with another device file.
[     8.575] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[     8.575] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[     8.575] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[     8.575] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[     8.575] (**) Ideapad extra buttons: always reports core events
[     8.575] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event5"
[     8.575] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[     8.575] (--) evdev: Ideapad extra buttons: Found keys
[     8.575] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[     8.575] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6/event5"
[     8.575] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[     8.575] (**) Option "xkb_rules" "evdev"
[     8.575] (**) Option "xkb_model" "pc104"
[     8.575] (**) Option "xkb_layout" "sk"
[     8.576] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     8.576] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     8.576] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     8.576] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     8.576] (**) AT Translated Set 2 keyboard: always reports core events
[     8.576] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     8.576] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     8.576] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     8.576] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     8.576] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     8.576] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[     8.576] (**) Option "xkb_rules" "evdev"
[     8.576] (**) Option "xkb_model" "pc104"
[     8.576] (**) Option "xkb_layout" "sk"
[     8.576] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[     8.576] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[     8.576] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     8.576] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[     8.576] (II) LoadModule: "synaptics"
[     8.576] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     8.577] (II) Module synaptics: vendor="X.Org Foundation"
[     8.577] 	compiled for 1.16.0, module version = 1.8.1
[     8.577] 	Module class: X.Org XInput Driver
[     8.577] 	ABI class: X.Org XInput driver, version 21.0
[     8.577] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[     8.577] (**) ETPS/2 Elantech Touchpad: always reports core events
[     8.577] (**) Option "Device" "/dev/input/event7"
[     8.666] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940 (res 0)
[     8.667] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1260 (res 0)
[     8.667] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[     8.667] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[     8.667] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[     8.667] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[     8.667] (**) Option "TapButton1" "1"
[     8.667] (**) Option "TapButton2" "2"
[     8.667] (**) Option "TapButton3" "3"
[     8.667] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     8.667] (**) ETPS/2 Elantech Touchpad: always reports core events
[     8.716] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[     8.716] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[     8.716] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     8.716] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[     8.716] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.063
[     8.716] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[     8.717] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[     8.717] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[     8.717] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[     8.717] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     8.717] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[     8.717] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     8.717] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     8.717] (II) No input driver specified, ignoring this device.
[     8.717] (II) This device may have been added with another device file.
[     8.717] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event11)
[     8.717] (II) No input driver specified, ignoring this device.
[     8.717] (II) This device may have been added with another device file.
[     8.719] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/js0)
[     8.719] (**) COMPANY USB Device: Applying InputClass "system-keyboard"
[     8.719] (II) No input driver specified, ignoring this device.
[     8.719] (II) This device may have been added with another device file.
[     8.719] (II) config/udev: removing device COMPANY USB Device
[     8.796] (II) evdev: COMPANY USB Device: Close
[     8.796] (II) UnloadModule: "evdev"
[     8.797] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event1)
[     8.797] (**) COMPANY USB Device: Applying InputClass "evdev keyboard catchall"
[     8.797] (**) COMPANY USB Device: Applying InputClass "system-keyboard"
[     8.797] (II) Using input driver 'evdev' for 'COMPANY USB Device'
[     8.797] (**) COMPANY USB Device: always reports core events
[     8.797] (**) evdev: COMPANY USB Device: Device: "/dev/input/event1"
[     8.797] (--) evdev: COMPANY USB Device: Vendor 0x9da Product 0x71fd
[     8.797] (--) evdev: COMPANY USB Device: Found 1 mouse buttons
[     8.797] (--) evdev: COMPANY USB Device: Found scroll wheel(s)
[     8.797] (--) evdev: COMPANY USB Device: Found relative axes
[     8.797] (--) evdev: COMPANY USB Device: Found absolute axes
[     8.797] (--) evdev: COMPANY USB Device: Found absolute multitouch axes
[     8.797] (--) evdev: COMPANY USB Device: Found x and y absolute axes
[     8.797] (--) evdev: COMPANY USB Device: Found keys
[     8.797] (II) evdev: COMPANY USB Device: Forcing relative x/y axes to exist.
[     8.797] (II) evdev: COMPANY USB Device: Configuring as mouse
[     8.797] (II) evdev: COMPANY USB Device: Configuring as keyboard
[     8.797] (II) evdev: COMPANY USB Device: Adding scrollwheel support
[     8.797] (**) evdev: COMPANY USB Device: YAxisMapping: buttons 4 and 5
[     8.797] (**) evdev: COMPANY USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.797] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:09DA:71FD.0001/input/input2/event1"
[     8.797] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: KEYBOARD, id 9)
[     8.797] (**) Option "xkb_rules" "evdev"
[     8.797] (**) Option "xkb_model" "pc104"
[     8.797] (**) Option "xkb_layout" "sk"
[     8.797] (II) evdev: COMPANY USB Device: initialized for relative axes.
[     8.797] (WW) evdev: COMPANY USB Device: ignoring absolute axes.
[     8.797] (**) COMPANY USB Device: (accel) keeping acceleration scheme 1
[     8.797] (**) COMPANY USB Device: (accel) acceleration profile 0
[     8.797] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[     8.797] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[     8.797] (II) config/udev: removing device COMPANY USB Device
[     8.851] (II) evdev: COMPANY USB Device: Close
[     8.851] (II) UnloadModule: "evdev"
[     8.851] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event2)
[     8.851] (**) COMPANY USB Device: Applying InputClass "evdev pointer catchall"
[     8.851] (II) Using input driver 'evdev' for 'COMPANY USB Device'
[     8.851] (**) COMPANY USB Device: always reports core events
[     8.851] (**) evdev: COMPANY USB Device: Device: "/dev/input/event2"
[     8.851] (--) evdev: COMPANY USB Device: Vendor 0x9da Product 0x71fd
[     8.851] (--) evdev: COMPANY USB Device: Found 12 mouse buttons
[     8.851] (--) evdev: COMPANY USB Device: Found scroll wheel(s)
[     8.851] (--) evdev: COMPANY USB Device: Found relative axes
[     8.851] (--) evdev: COMPANY USB Device: Found x and y relative axes
[     8.851] (II) evdev: COMPANY USB Device: Configuring as mouse
[     8.851] (II) evdev: COMPANY USB Device: Adding scrollwheel support
[     8.851] (**) evdev: COMPANY USB Device: YAxisMapping: buttons 4 and 5
[     8.851] (**) evdev: COMPANY USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.851] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:09DA:71FD.0002/input/input3/event2"
[     8.851] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: MOUSE, id 10)
[     8.851] (II) evdev: COMPANY USB Device: initialized for relative axes.
[     8.851] (**) COMPANY USB Device: (accel) keeping acceleration scheme 1
[     8.851] (**) COMPANY USB Device: (accel) acceleration profile 0
[     8.851] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[     8.851] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[     8.852] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/mouse0)
[     8.852] (II) No input driver specified, ignoring this device.
[     8.852] (II) This device may have been added with another device file.
[     8.852] (II) config/udev: removing device Lenovo EasyCamera
[     8.883] (II) evdev: Lenovo EasyCamera: Close
[     8.883] (II) UnloadModule: "evdev"
[     8.883] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event17)
[     8.883] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[     8.883] (**) Lenovo EasyCamera: Applying InputClass "system-keyboard"
[     8.883] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[     8.883] (**) Lenovo EasyCamera: always reports core events
[     8.883] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event17"
[     8.883] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x295
[     8.883] (--) evdev: Lenovo EasyCamera: Found keys
[     8.883] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[     8.883] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18/event17"
[     8.883] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[     8.883] (**) Option "xkb_rules" "evdev"
[     8.883] (**) Option "xkb_model" "pc104"
[     8.883] (**) Option "xkb_layout" "sk"
[    92.850] (II) intel(0): EDID vendor "CMN", prod id 5928
[    92.850] (II) intel(0): Printing DDC gathered Modelines:
[    92.850] (II) intel(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1940  900 903 908 926 +hsync -vsync (55.6 kHz eP)

Last edited by Sterver (2014-11-15 18:39:39)

Offline

#8 2014-11-16 12:26:52

PReP
Member
From: Sweden
Registered: 2010-06-13
Posts: 359
Website

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

7.334] (==) Matched intel as autoconfigured driver 0
[     7.334] (==) Matched nvidia as autoconfigured driver 1
[     7.334] (==) Matched nouveau as autoconfigured driver 2
[     7.334] (==) Matched nvidia as autoconfigured driver 3
[     7.334] (==) Matched nv as autoconfigured driver 4
[     7.334] (==) Matched intel as autoconfigured driver 5
[     7.334] (==) Matched modesetting as autoconfigured driver 6
[     7.334] (==) Matched fbdev as autoconfigured driver 7
[     7.334] (==) Matched vesa as autoconfigured driver 8

Don't know if that is the issue, but does this mean you have _all_ the drivers installed?
If not the just ignore my speculation.

. Main: Intel Core i5 6600k @ 4.4 Ghz, 16 GB DDR4 XMP, Gefore GTX 970 (Gainward Phantom) - Arch Linux 64-Bit
. Server: Intel Core i5 2500k @ 3.9 Ghz, 8 GB DDR2-XMP RAM @ 1600 Mhz, Geforce GTX 570 (Gainward Phantom) - Arch Linux 64-Bit
. Body: Estrogen @ 90%, Testestorone @ 10% (Not scientific just out-of-my-guesstimate-brain)

Offline

#9 2014-11-16 15:29:26

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 12,945

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

PRep,

that is typical output when X is started without a config file.

Sterver, we need to know more about your system.

laptop / desktop , processor, videocard ?
Is there an Optimus logo on the case ?

please post the output of lspci -k.

Also post a complete dmesg (you may want to put that on a pastebin site, see wiki ).

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#10 2014-11-16 15:36:56

Sterver
Member
From: Slovakia ZV
Registered: 2014-11-15
Posts: 6
Website

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

It is notebook Lenovo G710.
I've got Optimus settings in BIOS - I can set to use Optimus or only Nvidia graphic card.

Here is lspci -k:

$ lspci -k
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
	Subsystem: Lenovo Device 3978
	Kernel modules: ie31200_edac
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
	Subsystem: Lenovo Device 3803
	Kernel driver in use: i915
	Kernel modules: i915
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
	Subsystem: Intel Corporation Device 2010
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
	Subsystem: Lenovo Device 3978
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_hcd
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Intel Corporation Device 2010
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
	Subsystem: Lenovo Device 3978
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
	Subsystem: Intel Corporation Device 2010
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
	Subsystem: Lenovo Device 3978
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
	Subsystem: Intel Corporation Device 2010
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
	Subsystem: Intel Corporation Device 2010
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
	Subsystem: Lenovo Device 3978
	Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev a1)
	Subsystem: Lenovo GeForce GT 720M
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia
07:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
	Subsystem: Lenovo Device 0611
	Kernel driver in use: wl
	Kernel modules: bcma, wl
08:00.0 Ethernet controller: Qualcomm Atheros QCA8172 Fast Ethernet (rev 10)
	Subsystem: Qualcomm Atheros Device 1090
	Kernel driver in use: alx
	Kernel modules: alx

Here is dmsg output in txt: https://www.dropbox.com/s/jgbw6q0il7ixgc2/dmsg.txt?dl=0

Offline

#11 2014-11-16 16:12:09

Sterver
Member
From: Slovakia ZV
Registered: 2014-11-15
Posts: 6
Website

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

OK, I probably solved it.

I installed bumblebee.
$ sudo pacman -Syu mesa-dri xf86-video-intel bumblebee nvidia lib32-nvidia-utils
according to wiki, and after reboot, glxgears works.

$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
305 frames in 5.0 seconds = 60.996 FPS

So, thanks for your help.

Offline

#12 2016-11-05 10:09:26

faroinsua
Member
Registered: 2016-11-05
Posts: 1

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

Open the nvidia settings box at the right bottom corner. Click on "Nvidia settings configuration". Now check the box "Include X display names in the config file". Close session and login again or restart.

Offline

#13 2016-11-05 12:07:44

WorMzy
Administrator
From: Scotland
Registered: 2010-06-16
Posts: 12,412
Website

Re: [SOLVED] OpenGL GLX problem (glxinfo - Xlib: extension "GLX" missing)

Thanks for sharing, faroinsua. However, please don't necrobump, particularly when the topic is marked as solved.

https://wiki.archlinux.org/index.php/Co … bumping.22

Closing.

Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.

Offline

Pages: 1

Topic closed

Board footer

Powered by FluxBB