You are not logged in.
- Topics: Active | Unanswered
#6801 2014-11-06 19:19:23
- Vi0L0
- Member
- From: Poland
- Registered: 2009-06-24
- Posts: 1,349
- Website
Re: The AMD/ATI Bar & Grill
daboka wrote:
@Vi0L0
So the suggested way of making catalyst work on gnome 3.14 is using the [catalyst] repo, xorg 1.16 from official repos, reinstalling libnm-gtk and using a dm different from GDM (or just console login and startx)? The other thing which is still not clear to me, is if i have a laptop with an integrated and a discrete graphics card, do I still need the *-pxp packages, or is PowerXpress already implemented in the main package?
Im unable to guarantee that it will work, just saying that in my case gnome "crash" was not related to catalyst. The answer for your first question is yes. Use dm(or startx) other than gdm, its possible that libnm-gtk reinstall wont be needed.
As for the pxp support the answer is also yes, it should work just fine with the main package.
Offline
#6802 2014-11-06 21:52:33
- Kopkins
- Member
- Registered: 2012-07-01
- Posts: 189
Re: The AMD/ATI Bar & Grill
Ignore this,
Decided to start a thread about it instead.
Last edited by Kopkins (2014-11-07 21:28:13)
Offline
#6803 2014-11-09 09:17:03
- mazrimtaim1914
- Member
- Registered: 2014-02-05
- Posts: 4
Re: The AMD/ATI Bar & Grill
vipo wrote:
Vi0L0 wrote:doblerone wrote:Then I will wait for a reply from the maintainer.
I'm pretty sure that you didn't update catalyst-total-hd234k to version 13.1-28, because there I fixed conflict with ati-dri.
@vipo:
is this some kind of pxp notebook?
AMD often had problems with mobile gpus... Have you tried catalyst 14.9 + [xorg115] repo?Yup it s a laptop with integrated intel 3000 + amd 7690m xt graphics.
I know it worked fine with Xorg 1.15 so i am downgrading now and re-installing the catalyst drivers (i removed them). I will report back.
I had a configuration like yours and got the same error message.
Then I followed the vi0l0's suggestion by downgrade xorg to xorg115 and it worked.
Last edited by mazrimtaim1914 (2014-11-09 09:35:22)
Offline
#6804 2014-11-20 03:27:17
- Slashmolder
- Member
- Registered: 2014-11-20
- Posts: 1
Re: The AMD/ATI Bar & Grill
EDIT: Fixed everything but just using a different port in my graphics card.
I'm running into the problem where i3 is not displaying the i3bar on my secondary screen. I believe this issue is because for some reason my second monitor is showing up as disconnected in xrandr even though I'm currently using the monitor.
This issue is only happening when I use the xf86-video-ati driver. When utilizing the catalyst driver both monitors show up as connected in xrandr and i3bar is displayed on both of my monitors.
He's what xrandr outputs when I'm using the catalyst driver:
Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 16384 x 16384
DFP1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 59.95*+
1920x1080 60.00 50.00 59.94 60.00 50.00 24.00 59.94 23.98
1600x1200 60.00
1776x1000 50.00 59.94 50.00 24.00 59.94
1680x1050 60.00 50.00 59.94 24.00 23.98
1400x1050 60.00
1280x1024 75.02 60.02
1440x900 60.00
1280x960 75.02 60.02
1280x800 75.02 60.02
1152x864 59.95 75.00
1280x768 75.02 60.02
1280x720 60.00 50.00 59.94
1024x768 75.03 60.00
1152x648 50.00 59.94
800x600 75.00 60.32
720x480 60.00 59.94
640x480 75.00 59.94
DFP2 disconnected (normal left inverted right x axis y axis)
DFP3 disconnected (normal left inverted right x axis y axis)
DFP4 disconnected (normal left inverted right x axis y axis)
DFP5 disconnected (normal left inverted right x axis y axis)
DFP6 disconnected (normal left inverted right x axis y axis)
DFP7 disconnected (normal left inverted right x axis y axis)
DFP8 disconnected (normal left inverted right x axis y axis)
DFP9 disconnected (normal left inverted right x axis y axis)
DFP10 disconnected (normal left inverted right x axis y axis)
DFP11 disconnected (normal left inverted right x axis y axis)
DFP12 disconnected (normal left inverted right x axis y axis)
DFP13 disconnected (normal left inverted right x axis y axis)
DFP14 disconnected (normal left inverted right x axis y axis)
DFP15 disconnected (normal left inverted right x axis y axis)
DFP16 disconnected (normal left inverted right x axis y axis)
DFP17 connected 1920x1080+1920+120 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.00*+
1600x1200 60.00
1680x1050 59.95
1400x1050 60.00
1600x900 60.00
1280x1024 60.02
1440x900 59.89
1280x960 60.00
1280x800 59.81
1280x768 59.81
1280x720 59.81
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
DFP18 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)And here's what the xf86-video-ati driver is being used:
Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 16384 x 16384
DisplayPort-4 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 59.95*+
1920x1080 60.00 50.00 59.94 24.00 23.98
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1280x1024 75.02 60.02
1152x864 75.00
1280x720 60.00 50.00 59.94
1440x576i 50.00
1024x768 75.08 60.00
1440x480i 60.00 59.94
800x600 75.00 60.32
720x576 50.00
720x480 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
DisplayPort-5 disconnected (normal left inverted right x axis y axis)
DisplayPort-6 disconnected (normal left inverted right x axis y axis)
DisplayPort-7 disconnected (normal left inverted right x axis y axis)
DVI-1 disconnected (normal left inverted right x axis y axis)
1680x1050 (0xb6) 119.000MHz
h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 64.67KHz
v: height 1050 start 1053 end 1059 total 1080 clock 59.88Hz
1440x900 (0xb7) 88.750MHz
h: width 1440 start 1488 end 1520 total 1600 skew 0 clock 55.47KHz
v: height 900 start 903 end 909 total 926 clock 59.90Hz
1280x960 (0xb8) 108.000MHz
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1280x800 (0xb9) 71.000MHz
h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 49.31KHz
v: height 800 start 803 end 809 total 823 clock 59.91Hz
800x600 (0xba) 36.000MHz
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25HzHere's what I get when I physically unplug the display:
Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 16384 x 16384
DisplayPort-4 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 59.95*+
1920x1080 60.00 50.00 59.94 24.00 23.98
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1280x1024 75.02 60.02
1152x864 75.00
1280x720 60.00 50.00 59.94
1440x576i 50.00
1024x768 75.08 60.00
1440x480i 60.00 59.94
800x600 75.00 60.32
720x576 50.00
720x480 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
DisplayPort-5 disconnected (normal left inverted right x axis y axis)
DisplayPort-6 disconnected (normal left inverted right x axis y axis)
DisplayPort-7 disconnected (normal left inverted right x axis y axis)
DVI-1 connected (normal left inverted right x axis y axis)
1920x1080 60.00 +
1600x1200 60.00
1680x1050 59.88
1280x1024 60.02
1440x900 59.90
1280x960 60.00
1280x800 59.91
1024x768 60.00
800x600 60.32 56.25
640x480 60.00 I found it quite interesting that the correct resolution isn't showing up in xrandr even though the screen is most certainly running at 1920x1080. This resolution then shows up when I remove the cable.
When using the catalyst driver my xorg.conf was automatically generated and I never really touched it. When using the open source driver I'm using this org.conf to correctly position my two monitors:
Section "Monitor"
Identifier "DisplayPort-4"
Option "PreferredMode" "1920x1200"
Option "Primary" "true"
Option "Position" "0 0"
EndSection
Section "Monitor"
Identifier "DVI-1"
Option "PreferredMode" "1920x1080"
Option "Position" "1920 120"
EndSectionMy GPU is a HD 7970
My two monitors are a 1920x1200 plugged into the displayport plug and a 1920x1080 display plugged into the DVI port.
Last edited by Slashmolder (2014-11-24 00:00:35)
Offline
#6805 2014-11-20 10:09:27
- joanmanel
- Member
- Registered: 2012-11-06
- Posts: 236
Re: The AMD/ATI Bar & Grill
I have an AMD HD 7770, I also use Gnome. After months and months of perfectly use with the open source driver, I decided to give it a try to Catalyst.
I followed the guide, installed Catalyst-hook and related from Vi0L0's repo. Blacklisted radeon. Created the new xorg with aticonfig --initial
Once I rebot the computer, it goes to the terminal screen with the things loading, and it stops there forever after loading 4-5 things.
I can log to consoles, but there's nothing in the xorg logs.
There's seems to be nothing wrong, it simply won't load
EDIT: After login, I tried startx, and I got this log from Xorg:
[ 354.589]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 354.589] X Protocol Version 11, Revision 0
[ 354.589] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 354.589] Current Operating System: Linux arch 3.17.3-1-ARCH #1 SMP PREEMPT Fri Nov 14 23:13:48 CET 2014 x86_64
[ 354.589] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7065ae1d-097b-432c-b29c-42eb0289d7a8 rw quiet
[ 354.589] Build Date: 10 November 2014 07:52:13PM
[ 354.589]
[ 354.589] Current version of pixman: 0.32.6
[ 354.589] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 354.589] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 354.589] (==) Log file: "/var/log/Xorg.6.log", Time: Thu Nov 20 13:29:17 2014
[ 354.589] (==) Using config file: "/etc/X11/xorg.conf"
[ 354.589] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 354.589] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 354.589] (==) ServerLayout "aticonfig Layout"
[ 354.589] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 354.589] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 354.590] (**) | |-->Device "aticonfig-Device[0]-0"
[ 354.590] (==) Automatically adding devices
[ 354.590] (==) Automatically enabling devices
[ 354.590] (==) Automatically adding GPU devices
[ 354.590] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 354.590] Entry deleted from font path.
[ 354.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 354.590] Entry deleted from font path.
[ 354.590] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 354.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 354.590] Entry deleted from font path.
[ 354.590] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 354.590] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 354.590] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 354.590] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 354.590] (II) Loader magic: 0x818d80
[ 354.590] (II) Module ABI versions:
[ 354.590] X.Org ANSI C Emulation: 0.4
[ 354.590] X.Org Video Driver: 18.0
[ 354.590] X.Org XInput driver : 21.0
[ 354.590] X.Org Server Extension : 8.0
[ 354.592] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 354.594] (--) PCI:*(0:1:0:0) 1002:683d:1787:2014 rev 0, Mem @ 0xd0000000/268435456, 0xfeac0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 354.594] (II) Open ACPI successful (/var/run/acpid.socket)
[ 354.594] (II) "glx" will be loaded by default.
[ 354.594] (II) LoadModule: "glx"
[ 354.595] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 354.595] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 354.595] compiled for 6.9.0, module version = 1.0.0
[ 354.595] (II) LoadModule: "fglrx"
[ 354.595] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 354.618] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 354.618] compiled for 1.4.99.906, module version = 14.20.7
[ 354.618] Module class: X.Org Video Driver
[ 354.618] (II) Loading sub module "fglrxdrm"
[ 354.618] (II) LoadModule: "fglrxdrm"
[ 354.618] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 354.618] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 354.618] compiled for 1.4.99.906, module version = 14.20.7
[ 354.618] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 354.618] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002
[ 354.618] (II) AMD Proprietary Linux Driver Build Date: Sep 2 2014 10:14:55
[ 354.618] (++) using VT number 2
[ 354.618] (WW) Falling back to old probe method for fglrx
[ 354.622] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 354.626] ukiDynamicMajor: found major device number 250
[ 354.626] ukiDynamicMajor: found major device number 250
[ 354.626] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 354.626] ukiOpenDevice: node name is /dev/ati/card0
[ 354.626] ukiOpenDevice: open result is 11, (OK)
[ 354.626] ukiOpenByBusid: ukiOpenMinor returns 11
[ 354.626] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 354.771] (--) Chipset Supported AMD Graphics Processor (0x683D) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 354.772] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 354.772] (II) fglrx(0): pEnt->device->identifier=0x1ea7d90
[ 354.773] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[ 354.773] (II) Loading sub module "vgahw"
[ 354.773] (II) LoadModule: "vgahw"
[ 354.773] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 354.773] (II) Module vgahw: vendor="X.Org Foundation"
[ 354.773] compiled for 1.16.2, module version = 0.1.0
[ 354.773] ABI class: X.Org Video Driver, version 18.0
[ 354.774] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 354.774] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 354.774] (==) fglrx(0): Default visual is TrueColor
[ 354.774] (**) fglrx(0): Option "DPMS" "true"
[ 354.774] (==) fglrx(0): RGB weight 888
[ 354.774] (II) fglrx(0): Using 8 bits per RGB
[ 354.774] (==) fglrx(0): Buffer Tiling is ON
[ 354.774] (II) Loading sub module "fglrxdrm"
[ 354.774] (II) LoadModule: "fglrxdrm"
[ 354.774] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 354.774] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 354.774] compiled for 1.4.99.906, module version = 14.20.7
[ 354.776] ukiDynamicMajor: found major device number 250
[ 354.776] ukiDynamicMajor: found major device number 250
[ 354.776] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 354.776] ukiOpenDevice: node name is /dev/ati/card0
[ 354.776] ukiOpenDevice: open result is 13, (OK)
[ 354.776] ukiOpenByBusid: ukiOpenMinor returns 13
[ 354.776] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 354.776] (**) fglrx(0): NoAccel = NO
[ 354.776] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 354.776] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x683d)
[ 354.776] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2014)
[ 354.776] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 354.776] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 354.776] (--) fglrx(0): MMIO registers at 0xfeac0000
[ 354.776] (--) fglrx(0): I/O port at 0x0000d000
[ 354.776] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 354.777] (II) fglrx(0): AC Adapter is used
[ 354.784] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 354.784] (II) Loading sub module "vbe"
[ 354.784] (II) LoadModule: "vbe"
[ 354.784] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 354.784] (II) Module vbe: vendor="X.Org Foundation"
[ 354.784] compiled for 1.16.2, module version = 1.1.0
[ 354.784] ABI class: X.Org Video Driver, version 18.0
[ 354.785] (II) fglrx(0): VESA BIOS detected
[ 354.785] (II) fglrx(0): VESA VBE Version 3.0
[ 354.785] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 354.785] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 354.785] (II) fglrx(0): VESA VBE OEM Software Rev: 15.24
[ 354.785] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 354.785] (II) fglrx(0): VESA VBE OEM Product: VERDE
[ 354.785] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 354.785] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 354.785] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 354.785] (II) fglrx(0): PCIE card detected
[ 354.785] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 354.785] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 354.785] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
[ 354.785] (II) fglrx(0): RandR 1.2 support is enabled!
[ 354.785] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 354.785] (II) Loading sub module "fb"
[ 354.785] (II) LoadModule: "fb"
[ 354.785] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 354.785] (II) Module fb: vendor="X.Org Foundation"
[ 354.785] compiled for 1.16.2, module version = 1.0.0
[ 354.785] ABI class: X.Org ANSI C Emulation, version 0.4
[ 354.785] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 354.786] (II) Loading sub module "ddc"
[ 354.786] (II) LoadModule: "ddc"
[ 354.786] (II) Module "ddc" already built-in
[ 354.889] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 354.889] (II) fglrx(0): Output DFP2 has no monitor section
[ 354.889] (II) fglrx(0): Output CRT1 has no monitor section
[ 354.889] (II) Loading sub module "ddc"
[ 354.889] (II) LoadModule: "ddc"
[ 354.889] (II) Module "ddc" already built-in
[ 354.889] (II) fglrx(0): Connected Display0: DFP2
[ 354.889] (II) fglrx(0): Display0 EDID data ---------------------------
[ 354.889] (II) fglrx(0): Manufacturer: BNQ Model: 78ce Serial#: 21573
[ 354.889] (II) fglrx(0): Year: 2013 Week: 29
[ 354.889] (II) fglrx(0): EDID Version: 1.3
[ 354.889] (II) fglrx(0): Digital Display Input
[ 354.889] (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 354.889] (II) fglrx(0): Gamma: 2.20
[ 354.889] (II) fglrx(0): DPMS capabilities: Off
[ 354.889] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 354.889] (II) fglrx(0): Default color space is primary color space
[ 354.889] (II) fglrx(0): First detailed timing is preferred mode
[ 354.889] (II) fglrx(0): redX: 0.642 redY: 0.334 greenX: 0.334 greenY: 0.624
[ 354.889] (II) fglrx(0): blueX: 0.152 blueY: 0.050 whiteX: 0.313 whiteY: 0.329
[ 354.889] (II) fglrx(0): Supported established timings:
[ 354.889] (II) fglrx(0): 720x400@70Hz
[ 354.889] (II) fglrx(0): 640x480@60Hz
[ 354.889] (II) fglrx(0): 640x480@75Hz
[ 354.889] (II) fglrx(0): 800x600@60Hz
[ 354.889] (II) fglrx(0): 800x600@75Hz
[ 354.889] (II) fglrx(0): 832x624@75Hz
[ 354.889] (II) fglrx(0): 1024x768@60Hz
[ 354.890] (II) fglrx(0): 1024x768@75Hz
[ 354.890] (II) fglrx(0): 1280x1024@75Hz
[ 354.890] (II) fglrx(0): 1152x864@75Hz
[ 354.890] (II) fglrx(0): Manufacturer's mask: 0
[ 354.890] (II) fglrx(0): Supported standard timings:
[ 354.890] (II) fglrx(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 354.890] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 354.890] (II) fglrx(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 354.890] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 354.890] (II) fglrx(0): #4: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 354.890] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 354.890] (II) fglrx(0): Supported detailed timing:
[ 354.890] (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 354.890] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 354.890] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 354.890] (II) fglrx(0): Serial No: N7D07903SL0
[ 354.890] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 354.890] (II) fglrx(0): Monitor name: BenQ GL2460
[ 354.890] (II) fglrx(0): EDID (in hex):
[ 354.890] (II) fglrx(0): 00ffffffffffff0009d1ce7845540000
[ 354.890] (II) fglrx(0): 1d17010380351e782e6b35a455559f27
[ 354.890] (II) fglrx(0): 0c5054a56b80d1c081c081008180a9c0
[ 354.890] (II) fglrx(0): b30001010101023a801871382d40582c
[ 354.890] (II) fglrx(0): 4500132b2100001e000000ff004e3744
[ 354.890] (II) fglrx(0): 3037393033534c300a20000000fd0032
[ 354.890] (II) fglrx(0): 4c1e5311000a202020202020000000fc
[ 354.890] (II) fglrx(0): 0042656e5120474c323436300a20006e
[ 354.890] (II) fglrx(0): End of Display0 EDID data --------------------
[ 354.890] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 354.890] (II) fglrx(0): EDID for output DFP1
[ 354.890] (II) fglrx(0): EDID for output DFP2
[ 354.890] (II) fglrx(0): Manufacturer: BNQ Model: 78ce Serial#: 21573
[ 354.890] (II) fglrx(0): Year: 2013 Week: 29
[ 354.890] (II) fglrx(0): EDID Version: 1.3
[ 354.890] (II) fglrx(0): Digital Display Input
[ 354.890] (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 354.890] (II) fglrx(0): Gamma: 2.20
[ 354.890] (II) fglrx(0): DPMS capabilities: Off
[ 354.890] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 354.890] (II) fglrx(0): Default color space is primary color space
[ 354.890] (II) fglrx(0): First detailed timing is preferred mode
[ 354.890] (II) fglrx(0): redX: 0.642 redY: 0.334 greenX: 0.334 greenY: 0.624
[ 354.890] (II) fglrx(0): blueX: 0.152 blueY: 0.050 whiteX: 0.313 whiteY: 0.329
[ 354.890] (II) fglrx(0): Supported established timings:
[ 354.890] (II) fglrx(0): 720x400@70Hz
[ 354.890] (II) fglrx(0): 640x480@60Hz
[ 354.890] (II) fglrx(0): 640x480@75Hz
[ 354.890] (II) fglrx(0): 800x600@60Hz
[ 354.890] (II) fglrx(0): 800x600@75Hz
[ 354.890] (II) fglrx(0): 832x624@75Hz
[ 354.890] (II) fglrx(0): 1024x768@60Hz
[ 354.890] (II) fglrx(0): 1024x768@75Hz
[ 354.891] (II) fglrx(0): 1280x1024@75Hz
[ 354.891] (II) fglrx(0): 1152x864@75Hz
[ 354.891] (II) fglrx(0): Manufacturer's mask: 0
[ 354.891] (II) fglrx(0): Supported standard timings:
[ 354.891] (II) fglrx(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 354.891] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 354.891] (II) fglrx(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 354.891] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 354.891] (II) fglrx(0): #4: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 354.891] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 354.891] (II) fglrx(0): Supported detailed timing:
[ 354.891] (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 354.891] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 354.891] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 354.891] (II) fglrx(0): Serial No: N7D07903SL0
[ 354.891] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 354.891] (II) fglrx(0): Monitor name: BenQ GL2460
[ 354.891] (II) fglrx(0): EDID (in hex):
[ 354.891] (II) fglrx(0): 00ffffffffffff0009d1ce7845540000
[ 354.891] (II) fglrx(0): 1d17010380351e782e6b35a455559f27
[ 354.891] (II) fglrx(0): 0c5054a56b80d1c081c081008180a9c0
[ 354.891] (II) fglrx(0): b30001010101023a801871382d40582c
[ 354.891] (II) fglrx(0): 4500132b2100001e000000ff004e3744
[ 354.891] (II) fglrx(0): 3037393033534c300a20000000fd0032
[ 354.891] (II) fglrx(0): 4c1e5311000a202020202020000000fc
[ 354.891] (II) fglrx(0): 0042656e5120474c323436300a20006e
[ 354.891] (II) fglrx(0): Printing probed modes for output DFP2
[ 354.891] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 354.891] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1400x1050"x60.0 146.25 1400 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1440x900"x60.0 108.00 1440 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1280x720"x60.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 354.891] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 354.891] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 354.891] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 354.891] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 354.891] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 354.891] (II) fglrx(0): EDID for output CRT1
[ 354.891] (II) fglrx(0): Output DFP1 disconnected
[ 354.891] (II) fglrx(0): Output DFP2 connected
[ 354.891] (II) fglrx(0): Output CRT1 disconnected
[ 354.891] (II) fglrx(0): Using exact sizes for initial modes
[ 354.891] (II) fglrx(0): Output DFP2 using initial mode 1920x1080
[ 354.891] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 354.891] (II) fglrx(0): DPI set to (96, 96)
[ 354.891] (II) fglrx(0): Eyefinity capable adapter detected.
[ 354.891] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 354.891] (==) fglrx(0): PseudoColor visuals disabled
[ 354.891] (II) Loading sub module "ramdac"
[ 354.891] (II) LoadModule: "ramdac"
[ 354.891] (II) Module "ramdac" already built-in
[ 354.891] (==) fglrx(0): NoDRI = NO
[ 354.891] (==) fglrx(0): Capabilities: 0x00000000
[ 354.891] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 354.891] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 354.891] (==) fglrx(0): UseFastTLS=0
[ 354.891] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 354.891] (--) Depth 24 pixmap format is 32 bpp
[ 354.891] (II) fglrx(0): doing swlDriScreenInit
[ 354.891] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 354.891] ukiDynamicMajor: found major device number 250
[ 354.891] ukiDynamicMajor: found major device number 250
[ 354.891] ukiDynamicMajor: found major device number 250
[ 354.891] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 354.891] ukiOpenDevice: node name is /dev/ati/card0
[ 354.892] ukiOpenDevice: open result is 14, (OK)
[ 354.892] ukiOpenByBusid: ukiOpenMinor returns 14
[ 354.892] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 354.892] (II) fglrx(0): [uki] DRM interface version 1.0
[ 354.892] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 354.892] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x43000
[ 354.892] (II) fglrx(0): [uki] mapped SAREA 0x43000 to 0x7fac15f53000
[ 354.892] (II) fglrx(0): [uki] framebuffer handle = 0x44000
[ 354.892] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 354.892] (II) fglrx(0): swlDriScreenInit done
[ 354.892] (II) fglrx(0): Kernel Module Version Information:
[ 354.892] (II) fglrx(0): Name: fglrx
[ 354.892] (II) fglrx(0): Version: 14.20.7
[ 354.892] (II) fglrx(0): Date: Sep 2 2014
[ 354.892] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 354.892] (II) fglrx(0): Kernel Module version matches driver.
[ 354.892] (II) fglrx(0): Kernel Module Build Time Information:
[ 354.892] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.17.3-1-ARCH
[ 354.892] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 354.892] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 354.892] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 354.892] (II) fglrx(0): [uki] register handle = 0x00045000
[ 354.892] (II) fglrx(0): DRI initialization successfull
[ 354.892] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000
[ 354.892] (==) fglrx(0): Backing store enabled
[ 354.892] (**) fglrx(0): DPMS enabled
[ 354.893] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 354.893] (**) fglrx(0): Textured Video is enabled.
[ 354.893] (II) LoadModule: "glesx"
[ 354.893] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 354.893] (II) Module glesx: vendor="X.Org Foundation"
[ 354.893] compiled for 1.4.99.906, module version = 1.0.0
[ 354.893] (II) fglrx(0): GLESX enableFlags = 8784
[ 354.893] (II) fglrx(0): GLESX is enabled
[ 354.893] (II) LoadModule: "amdxmm"
[ 354.893] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 354.894] (II) Module amdxmm: vendor="X.Org Foundation"
[ 354.894] compiled for 1.4.99.906, module version = 2.0.0
[ 354.908] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 354.909] (II) fglrx(0): Enable composite support successfully
[ 354.909] (WW) fglrx(0): Option "VendorName" is not used
[ 354.909] (WW) fglrx(0): Option "ModelName" is not used
[ 354.909] (II) fglrx(0): X context handle = 0x2
[ 354.909] (II) fglrx(0): [DRI] installation complete
[ 354.910] (==) fglrx(0): Silken mouse enabled
[ 354.910] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 354.910] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 355.036] (--) RandR disabled
[ 355.041] ukiDynamicMajor: found major device number 250
[ 355.041] ukiDynamicMajor: found major device number 250
[ 355.042] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 355.042] ukiOpenDevice: node name is /dev/ati/card0
[ 355.042] ukiOpenDevice: open result is 15, (OK)
[ 355.042] ukiOpenByBusid: ukiOpenMinor returns 15
[ 355.042] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 355.042] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 355.044] ukiDynamicMajor: found major device number 250
[ 355.044] ukiDynamicMajor: found major device number 250
[ 355.044] ukiDynamicMajor: found major device number 250
[ 355.044] ukiOpenDevice: node name is /dev/ati/card0
[ 355.044] ukiOpenDevice: open result is 16, (OK)
[ 355.044] ukiGetBusid returned 'PCI:1:0:0'
[ 355.044] ukiOpenDevice: node name is /dev/ati/card1
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: Open failed
[ 355.044] ukiOpenDevice: node name is /dev/ati/card2
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: Open failed
[ 355.044] ukiOpenDevice: node name is /dev/ati/card3
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: Open failed
[ 355.044] ukiOpenDevice: node name is /dev/ati/card4
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: Open failed
[ 355.044] ukiOpenDevice: node name is /dev/ati/card5
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: Open failed
[ 355.044] ukiOpenDevice: node name is /dev/ati/card6
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: Open failed
[ 355.044] ukiOpenDevice: node name is /dev/ati/card7
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: Open failed
[ 355.044] ukiOpenDevice: node name is /dev/ati/card8
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.044] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: Open failed
[ 355.045] ukiOpenDevice: node name is /dev/ati/card9
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: Open failed
[ 355.045] ukiOpenDevice: node name is /dev/ati/card10
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: Open failed
[ 355.045] ukiOpenDevice: node name is /dev/ati/card11
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: Open failed
[ 355.045] ukiOpenDevice: node name is /dev/ati/card12
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: Open failed
[ 355.045] ukiOpenDevice: node name is /dev/ati/card13
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: Open failed
[ 355.045] ukiOpenDevice: node name is /dev/ati/card14
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: Open failed
[ 355.045] ukiOpenDevice: node name is /dev/ati/card15
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: open result is -1, (No such device)
[ 355.045] ukiOpenDevice: Open failed
[ 355.045] ukiDynamicMajor: found major device number 250
[ 355.045] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 355.045] ukiOpenDevice: node name is /dev/ati/card0
[ 355.045] ukiOpenDevice: open result is 16, (OK)
[ 355.045] ukiOpenByBusid: ukiOpenMinor returns 16
[ 355.045] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 355.066] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 355.067] ukiDynamicMajor: found major device number 250
[ 355.067] ukiDynamicMajor: found major device number 250
[ 355.067] ukiDynamicMajor: found major device number 250
[ 355.067] ukiOpenDevice: node name is /dev/ati/card0
[ 355.067] ukiOpenDevice: open result is 17, (OK)
[ 355.067] ukiGetBusid returned 'PCI:1:0:0'
[ 355.067] ukiOpenDevice: node name is /dev/ati/card1
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card2
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card3
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card4
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card5
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card6
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card7
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card8
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card9
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card10
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card11
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card12
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card13
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card14
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiOpenDevice: node name is /dev/ati/card15
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: open result is -1, (No such device)
[ 355.067] ukiOpenDevice: Open failed
[ 355.067] ukiDynamicMajor: found major device number 250
[ 355.067] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 355.067] ukiOpenDevice: node name is /dev/ati/card0
[ 355.068] ukiOpenDevice: open result is 17, (OK)
[ 355.068] ukiOpenByBusid: ukiOpenMinor returns 17
[ 355.068] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 355.081] (II) fglrx(0): OverDrive5 Detected!
[ 355.087] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 355.128] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 355.129] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 355.129] (**) Power Button: Applying InputClass "system-keyboard"
[ 355.129] (II) LoadModule: "evdev"
[ 355.129] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 355.129] (II) Module evdev: vendor="X.Org Foundation"
[ 355.129] compiled for 1.16.0, module version = 2.9.0
[ 355.129] Module class: X.Org XInput Driver
[ 355.129] ABI class: X.Org XInput driver, version 21.0
[ 355.130] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 18 paused 0
[ 355.130] (II) Using input driver 'evdev' for 'Power Button'
[ 355.130] (**) Power Button: always reports core events
[ 355.130] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 355.130] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 355.130] (--) evdev: Power Button: Found keys
[ 355.130] (II) evdev: Power Button: Configuring as keyboard
[ 355.130] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[ 355.130] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 355.130] (**) Option "xkb_rules" "evdev"
[ 355.130] (**) Option "xkb_model" "pc104"
[ 355.130] (**) Option "xkb_layout" "gb,es"
[ 355.130] (**) Option "xkb_variant" ","
[ 355.156] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 355.156] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 355.156] (**) Power Button: Applying InputClass "system-keyboard"
[ 355.157] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 19 paused 0
[ 355.157] (II) Using input driver 'evdev' for 'Power Button'
[ 355.157] (**) Power Button: always reports core events
[ 355.157] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 355.157] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 355.157] (--) evdev: Power Button: Found keys
[ 355.157] (II) evdev: Power Button: Configuring as keyboard
[ 355.157] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2"
[ 355.157] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 355.157] (**) Option "xkb_rules" "evdev"
[ 355.157] (**) Option "xkb_model" "pc104"
[ 355.157] (**) Option "xkb_layout" "gb,es"
[ 355.157] (**) Option "xkb_variant" ","
[ 355.158] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[ 355.158] (II) No input driver specified, ignoring this device.
[ 355.158] (II) This device may have been added with another device file.
[ 355.158] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4008 (/dev/input/event0)
[ 355.158] (**) Logitech Unifying Device. Wireless PID:4008: Applying InputClass "evdev pointer catchall"
[ 355.159] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[ 355.159] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4008'
[ 355.159] (**) Logitech Unifying Device. Wireless PID:4008: always reports core events
[ 355.159] (**) evdev: Logitech Unifying Device. Wireless PID:4008: Device: "/dev/input/event0"
[ 355.159] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Vendor 0x46d Product 0xc52b
[ 355.159] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Found 20 mouse buttons
[ 355.159] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Found scroll wheel(s)
[ 355.159] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Found relative axes
[ 355.159] (--) evdev: Logitech Unifying Device. Wireless PID:4008: Found x and y relative axes
[ 355.159] (II) evdev: Logitech Unifying Device. Wireless PID:4008: Configuring as mouse
[ 355.159] (II) evdev: Logitech Unifying Device. Wireless PID:4008: Adding scrollwheel support
[ 355.159] (**) evdev: Logitech Unifying Device. Wireless PID:4008: YAxisMapping: buttons 4 and 5
[ 355.159] (**) evdev: Logitech Unifying Device. Wireless PID:4008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 355.159] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input2/event0"
[ 355.159] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4008" (type: MOUSE, id 8)
[ 355.159] (II) evdev: Logitech Unifying Device. Wireless PID:4008: initialized for relative axes.
[ 355.160] (**) Logitech Unifying Device. Wireless PID:4008: (accel) keeping acceleration scheme 1
[ 355.160] (**) Logitech Unifying Device. Wireless PID:4008: (accel) acceleration profile 0
[ 355.160] (**) Logitech Unifying Device. Wireless PID:4008: (accel) acceleration factor: 2.000
[ 355.160] (**) Logitech Unifying Device. Wireless PID:4008: (accel) acceleration threshold: 4
[ 355.160] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4008 (/dev/input/mouse0)
[ 355.160] (II) No input driver specified, ignoring this device.
[ 355.160] (II) This device may have been added with another device file.
[ 355.161] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4003 (/dev/input/event1)
[ 355.161] (**) Logitech Unifying Device. Wireless PID:4003: Applying InputClass "evdev keyboard catchall"
[ 355.161] (**) Logitech Unifying Device. Wireless PID:4003: Applying InputClass "system-keyboard"
[ 355.162] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 21 paused 0
[ 355.162] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4003'
[ 355.162] (**) Logitech Unifying Device. Wireless PID:4003: always reports core events
[ 355.162] (**) evdev: Logitech Unifying Device. Wireless PID:4003: Device: "/dev/input/event1"
[ 355.162] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Vendor 0x46d Product 0xc52b
[ 355.162] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found 1 mouse buttons
[ 355.162] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found scroll wheel(s)
[ 355.162] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found relative axes
[ 355.162] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing relative x/y axes to exist.
[ 355.162] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found absolute axes
[ 355.162] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing absolute x/y axes to exist.
[ 355.162] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found keys
[ 355.162] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as mouse
[ 355.162] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as keyboard
[ 355.162] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Adding scrollwheel support
[ 355.162] (**) evdev: Logitech Unifying Device. Wireless PID:4003: YAxisMapping: buttons 4 and 5
[ 355.162] (**) evdev: Logitech Unifying Device. Wireless PID:4003: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 355.162] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input3/event1"
[ 355.162] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4003" (type: KEYBOARD, id 9)
[ 355.162] (**) Option "xkb_rules" "evdev"
[ 355.162] (**) Option "xkb_model" "pc104"
[ 355.162] (**) Option "xkb_layout" "gb,es"
[ 355.162] (**) Option "xkb_variant" ","
[ 355.162] (II) evdev: Logitech Unifying Device. Wireless PID:4003: initialized for relative axes.
[ 355.162] (WW) evdev: Logitech Unifying Device. Wireless PID:4003: ignoring absolute axes.
[ 355.163] (**) Logitech Unifying Device. Wireless PID:4003: (accel) keeping acceleration scheme 1
[ 355.163] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration profile 0
[ 355.163] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration factor: 2.000
[ 355.163] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration threshold: 4
[ 355.163] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
[ 355.163] (II) No input driver specified, ignoring this device.
[ 355.163] (II) This device may have been added with another device file.
[ 355.163] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)
[ 355.163] (II) No input driver specified, ignoring this device.
[ 355.163] (II) This device may have been added with another device file.
[ 355.164] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9)
[ 355.164] (II) No input driver specified, ignoring this device.
[ 355.164] (II) This device may have been added with another device file.
[ 355.164] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)
[ 355.164] (II) No input driver specified, ignoring this device.
[ 355.164] (II) This device may have been added with another device file.
[ 355.164] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
[ 355.164] (II) No input driver specified, ignoring this device.
[ 355.164] (II) This device may have been added with another device file.
[ 355.164] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12)
[ 355.164] (II) No input driver specified, ignoring this device.
[ 355.164] (II) This device may have been added with another device file.
[ 355.164] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event13)
[ 355.165] (II) No input driver specified, ignoring this device.
[ 355.165] (II) This device may have been added with another device file.
[ 355.165] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event6)
[ 355.165] (II) No input driver specified, ignoring this device.
[ 355.165] (II) This device may have been added with another device file.
[ 355.165] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 355.165] (II) No input driver specified, ignoring this device.
[ 355.165] (II) This device may have been added with another device file.
[ 355.169] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 355.204] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Close
[ 355.204] (II) UnloadModule: "evdev"
[ 355.205] (II) systemd-logind: releasing fd for 13:65
[ 355.230] (II) evdev: Logitech Unifying Device. Wireless PID:4008: Close
[ 355.230] (II) UnloadModule: "evdev"
[ 355.230] (II) systemd-logind: releasing fd for 13:64
[ 355.296] (II) evdev: Power Button: Close
[ 355.296] (II) UnloadModule: "evdev"
[ 355.296] (II) systemd-logind: releasing fd for 13:66
[ 355.330] (II) evdev: Power Button: Close
[ 355.330] (II) UnloadModule: "evdev"
[ 355.330] (II) systemd-logind: releasing fd for 13:67
[ 355.373] (II) fglrx(0): Shutdown CMMQS
[ 355.374] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 355.374] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x43000 at 0x7fac15f53000
[ 355.946] (EE) Server terminated successfully (0). Closing log file.Last edited by joanmanel (2014-11-20 14:47:46)
Offline
#6806 2014-11-25 07:38:00
- aktivb
- Member
- Registered: 2014-11-25
- Posts: 1
Re: The AMD/ATI Bar & Grill
ok, so I'm having trouble loading the fglrx module:
$ catalyst_build_module
Building catalyst-3.17-ARCH package for 3.17.3-1-ARCH kernel ...
--------
OsVersion says: SMP=1
file /proc/kallsyms says: SMP=1
file /usr/lib/modules/3.17.3-1-ARCH/build/include/generated/autoconf.h says: SMP=1
file /usr/lib/modules/3.17.3-1-ARCH/build/include/generated/autoconf.h says: MODVERSIONS=1
file /usr/lib/modules/3.17.3-1-ARCH/build/arch/x86/include/asm/compat.h says: COMPAT_ALLOC_USER_SPACE=arch_compat_alloc_user_space
make: Entering directory '/usr/lib/modules/3.17.3-1-ARCH/build'
CC [M] /tmp/catalyst.kUCZP0/src/firegl_public.o
CC [M] /tmp/catalyst.kUCZP0/src/kcl_acpi.o
/tmp/catalyst.kUCZP0/src/kcl_acpi.c: In function ‘KCL_ACPI_Slot_No_Hotplug’:
/tmp/catalyst.kUCZP0/src/kcl_acpi.c:836:20: warning: unused variable ‘pdev’ [-Wunused-variable]
struct pci_dev *pdev = (struct pci_dev *)data;
^
CC [M] /tmp/catalyst.kUCZP0/src/kcl_agp.o
CC [M] /tmp/catalyst.kUCZP0/src/kcl_debug.o
CC [M] /tmp/catalyst.kUCZP0/src/kcl_ioctl.o
CC [M] /tmp/catalyst.kUCZP0/src/kcl_io.o
CC [M] /tmp/catalyst.kUCZP0/src/kcl_pci.o
CC [M] /tmp/catalyst.kUCZP0/src/kcl_str.o
CC [M] /tmp/catalyst.kUCZP0/src/kcl_iommu.o
CC [M] /tmp/catalyst.kUCZP0/src/kcl.o
CC [M] /tmp/catalyst.kUCZP0/src/kcl_wait.o
LD [M] /tmp/catalyst.kUCZP0/src/fglrx.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/catalyst.kUCZP0/src/fglrx.mod.o
LD [M] /tmp/catalyst.kUCZP0/src/fglrx.ko
make: Leaving directory '/usr/lib/modules/3.17.3-1-ARCH/build'==> Entering fakeroot environment...
==> Starting package()...
==> Tidying install...
-> Purging unwanted files...
-> Removing libtool files...
-> Removing static library files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package "catalyst-3.17-ARCH"...
-> Generating .PKGINFO file...
-> Adding install file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: catalyst-3.17-ARCH 14.9-1 (Tue Nov 25 07:07:49 CET 2014)
==> Cleaning up...
Ok. catalyst-3.17-ARCH package built succesfully. Installing ...
If it's asking for password - type root password
Password:
loading packages...
resolving dependencies...
looking for inter-conflicts...
Packages (1): catalyst-3.17-ARCH-14.9-1
Total Installed Size: 3.18 MiB
:: Proceed with installation? [Y/n] Y
checking keyring...
checking package integrity...
loading package files...
checking for file conflicts...
checking available disk space...
installing catalyst-3.17-ARCH...
Done.looks fine to me, an unused variable shouldn't be an issue, but when I reboot, systemd-modules-load.service fails (after a systemctl restart):
# systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Tue 2014-11-25 05:47:15 CET; 1h 26min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 314 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
Main PID: 314 (code=exited, status=1/FAILURE)
Nov 25 05:47:15 #### systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Nov 25 05:47:15 #### systemd[1]: Failed to start Load Kernel Modules.
Nov 25 05:47:15 #### systemd[1]: Unit systemd-modules-load.service entered failed state.
Nov 25 05:47:15 #### systemd[1]: systemd-modules-load.service failed. # journalctl -xe
-- Userspace start-up required 4405 microseconds.
Nov 25 06:09:02 #### su[1113]: (to root) #### on pts/1
Nov 25 06:09:02 #### su[1113]: pam_unix(su-l:session): session opened for user root by ####(uid=####)
Nov 25 06:09:06 #### su[1113]: pam_unix(su-l:session): session closed for user root
Nov 25 06:10:20 #### kernel: fglrx: Unknown symbol amd_iommu_bind_pasid (err 0)
Nov 25 06:10:20 #### kernel: fglrx: Unknown symbol amd_iommu_set_invalid_ppr_cb (err 0)
Nov 25 06:10:20 #### kernel: fglrx: Unknown symbol acpi_lid_open (err 0)
Nov 25 06:10:20 #### kernel: fglrx: Unknown symbol amd_iommu_set_invalidate_ctx_cb (err 0)
Nov 25 06:10:20 #### kernel: fglrx: Unknown symbol amd_iommu_unbind_pasid (err 0)
Nov 25 06:10:20 #### kernel: fglrx: Unknown symbol amd_iommu_init_device (err 0)
Nov 25 06:10:20 #### kernel: fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
Nov 25 06:10:20 #### kernel: fglrx: Unknown symbol amd_iommu_free_device (err 0)
Nov 25 06:10:20 #### kernel: fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
Nov 25 07:07:56 #### su[2458]: (to root) #### on pts/1
Nov 25 07:07:56 #### su[2458]: pam_unix(su-l:session): session opened for user root by ####(uid=####)
Nov 25 07:08:00 #### su[2458]: pam_unix(su-l:session): session closed for user root
Nov 25 07:17:31 #### systemd-modules-load[2520]: Failed to insert 'fglrx': No such device
Nov 25 07:17:31 #### systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Nov 25 07:17:31 #### systemd[1]: Failed to start Load Kernel Modules.
-- Subject: Unit systemd-modules-load.service has failed # dmesg --level err
[ 145.179701] systemd[1]: Failed to start Load Kernel Modules.
[ 145.357448] piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr # cat /etc/modprobe.d/modprobe.conf
blacklist radeon
# cat /etc/modules-load.d/catalyst.conf
fglrx # lspci -k | grep -A2 00:07
00:07.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde XT [Radeon HD 7770/8760 / R7 250X]
Subsystem: ASUSTeK Computer Inc. Device 0429
Kernel modules: radeon, fglrx # modprobe fglrx
modprobe: ERROR: could not insert 'fglrx': No such device
# insmod /usr/lib/modules/extramodules-3.17-ARCH/fglrx.ko.gz
insmod: ERROR: could not insert module /usr/lib/modules/extramodules-3.17-ARCH/fglrx.ko.gz: Unknown symbol in module
# cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=124afd49-9cc6-4fd3-8616-eaae01b3230d rw quiet nomodesetThis is with catalyst-generator, I had the same exact issue with catalyst-hook
# pacman -Qs catalyst
local/catalyst-3.17-ARCH 14.9-1
AMD/ATI Catalyst drivers. fglrx kernel module for 3.17.3-1-ARCH kernel
local/catalyst-generator 14.9-1
AMD/ATI drivers. Generator of catalyst-{kernver} packages with fglrx module inside.
local/catalyst-libgl 14.9-1
AMD/ATI drivers. Catalyst drivers libraries symlinks + experimental powerXpress support.
local/catalyst-utils 14.9-1
AMD/ATI drivers. Utilities and libraries. Radeons HD 2 3 4 xxx ARE NOT SUPPORTED
local/opencl-catalyst 14.9-1
AMD/ATI drivers. OpenCL implemention for AMD Catalyst
# uname -a
Linux #### 3.17.3-1-ARCH #1 SMP PREEMPT Fri Nov 14 23:13:48 CET 2014 x86_64 GNU/LinuxThis is on a clean install. It is running as a xen HVM guest, the card gets VGA-passthrough'ed. catalyst/fglrx works fine on a gentoo HVM guest.
I am using the vanilla arch kernel, (which should be fine btw, HVMs think they are running on bare metal and require no special configuration), but I looked at the config anyways:
# grep AMD_IOMMU /tmp/src/core/linux/config.x86_64
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set
CONFIG_AMD_IOMMU_V2=mLoaded the amd_iommu_v2 module for funsies (I have an intel motherboard/cpu .. ) and tried a systemctl restart systemd-modules-load.service, which reduced the noise a bit:
# journalctl -xe
-- Unit UNIT has begun starting up.
Nov 25 08:05:25 #### systemd[377]: Received SIGRTMIN+24 from PID 3166 (kill).
Nov 25 08:05:25 #### systemd[378]: pam_unix(systemd-user:session): session closed for user ####
Nov 25 08:10:16 #### kernel: AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
Nov 25 08:10:16 #### kernel: AMD IOMMUv2 functionality not available on this system
Nov 25 08:11:20 #### systemd-modules-load[3184]: Failed to insert 'fglrx': No such device
Nov 25 08:11:20 #### systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Nov 25 08:11:20 #### systemd[1]: Failed to start Load Kernel Modules.
-- Subject: Unit systemd-modules-load.service has failedBut no go. So, any suggestions? What's the missing piece here? Might be something obvious, since this is my first go at arch/pacman/systemd
Offline
#6807 2014-11-25 11:02:51
- Jarno
- Member
- Registered: 2013-12-26
- Posts: 7
Re: The AMD/ATI Bar & Grill
Do you guys have that problem that Unity3D games, like Rust and 7 Days to Die, freezes Xorg and computer hardlocks like even REISUB isn't working?
When Xorg freezes, I can connect to computer with SSH and when checking with htop it shows that Xorg.bin hogs 100% of 1 core.
When Xorg freezes, only thing I can do is force restart with power button or sudo reboot when connected with SSH.
In journalctl there is "[fglrx] ASIC hang happened" error when Xorg freezes, journalctl shown below.
GPU: 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850] Xorg version: 1.16.2-1 Kernel version: 3.17.3-1-ARCH Installed catalyst packages:
local/catalyst-hook 14.9-11
local/catalyst-libgl 14.9-10
local/catalyst-utils 14.9-10
local/lib32-catalyst-libgl 14.9-10
local/lib32-catalyst-utils 14.9-10
local/lib32-opencl-catalyst 14.9-10
local/opencl-catalyst 14.9-10 xorg.conf: http://pastebin.com/YD6EgDDp Xorg.0.log: http://pastebin.com/6hZrfYb7 journalctl when Xorg freezes: http://pastebin.com/mD7dXRR6 Offline
#6808 2014-11-26 18:53:48
- ~lynks
- Member
- Registered: 2013-10-14
- Posts: 14
Re: The AMD/ATI Bar & Grill
Jarno wrote:
Do you guys have that problem that Unity3D games, like Rust and 7 Days to Die, freezes Xorg and computer hardlocks like even REISUB isn't working?
When Xorg freezes, I can connect to computer with SSH and when checking with htop it shows that Xorg.bin hogs 100% of 1 core.
When Xorg freezes, only thing I can do is force restart with power button or sudo reboot when connected with SSH.
In journalctl there is "[fglrx] ASIC hang happened" error when Xorg freezes
Yep, I have this issue exactly as you describe with the same error in journalctl, triggered by Kerbal Space Program (another Unity game), often after an hour or so in game or during a 'scene change' or load.
Weirdly, if I drop the graphical settings (particularly settings that lower texture cache usage), it doesn't happen...
Offline
#6809 2014-12-03 21:40:39
- Daniel.White
- Member
- Registered: 2014-07-27
- Posts: 13
Re: The AMD/ATI Bar & Grill
I have a question: catalyst 14.9 works with Xorg1.16?
I am using catalyst pxp driver but xorg doesn't start after the updating...
Offline
#6810 2014-12-04 02:23:27
- Xabre
- Member
- From: Serbia
- Registered: 2009-03-19
- Posts: 755
Re: The AMD/ATI Bar & Grill
Seems that PowerExpress is not agreeing well with Xorg 1.16. I tried everything on my ProBook. If anyone has a hint, would be greatly appreciated too.
Offline
#6811 2014-12-07 00:27:24
- l0vot
- Member
- Registered: 2011-08-26
- Posts: 117
Re: The AMD/ATI Bar & Grill
Does anyone have instructions on how to install AMD ADL SDK, everything I try get's shot down because the file I DLed doesn't pass the integrity check, even after I fixed the md5sum.
Offline
#6812 2014-12-08 15:33:00
- Sarge
- Member
- Registered: 2014-07-21
- Posts: 14
Re: The AMD/ATI Bar & Grill
Hello, guys
Im trying to setup amd/intel graphics on my laptop
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mars [Radeon HD 8670A/8670M/8750M]I install catalyst-test from aur
Blacklist radeon
Check that /etc/modules-load.d/catalyst.conf contains fglrx
Create initial config
sudo aticonfig --initialEnable amd with
sudo pxp_switch_catalyst amd
And then I get fatal error in xorg after reboot
Here is my xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionand Xorg.0.log
[ 10.252]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 10.252] X Protocol Version 11, Revision 0
[ 10.252] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 10.252] Current Operating System: Linux sarge-laptop 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 x86_64
[ 10.252] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda2 rw video.use_native_backlight=1 quiet
[ 10.252] Build Date: 10 November 2014 07:52:13PM
[ 10.252]
[ 10.252] Current version of pixman: 0.32.6
[ 10.252] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.252] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.252] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 8 18:15:53 2014
[ 10.252] (==) Using config file: "/etc/X11/xorg.conf"
[ 10.252] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10.252] (==) ServerLayout "aticonfig Layout"
[ 10.252] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 10.252] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 10.253] (**) | |-->Device "aticonfig-Device[0]-0"
[ 10.253] (==) Automatically adding devices
[ 10.253] (==) Automatically enabling devices
[ 10.253] (==) Automatically adding GPU devices
[ 10.253] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10.253] Entry deleted from font path.
[ 10.253] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 10.253] Entry deleted from font path.
[ 10.253] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.253] Entry deleted from font path.
[ 10.253] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.253] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.253] Entry deleted from font path.
[ 10.253] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.253] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 10.253] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.253] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.253] (II) Loader magic: 0x818d80
[ 10.253] (II) Module ABI versions:
[ 10.253] X.Org ANSI C Emulation: 0.4
[ 10.253] X.Org Video Driver: 18.0
[ 10.253] X.Org XInput driver : 21.0
[ 10.253] X.Org Server Extension : 8.0
[ 10.254] (EE) systemd-logind: failed to get session: PID 2239 does not belong to any known session
[ 10.254] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 10.255] (--) PCI:*(0:0:2:0) 8086:0a16:1025:081e rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[ 10.255] (--) PCI: (0:2:0:0) 1002:6600:1025:082b rev 0, Mem @ 0xa0000000/268435456, 0xc0500000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 10.255] (II) Open ACPI successful (/var/run/acpid.socket)
[ 10.255] (II) "glx" will be loaded by default.
[ 10.255] (II) LoadModule: "glx"
[ 10.255] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.255] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 10.255] compiled for 6.9.0, module version = 1.0.0
[ 10.255] (II) LoadModule: "fglrx"
[ 10.255] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 10.269] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 10.269] compiled for 1.4.99.906, module version = 14.20.7
[ 10.269] Module class: X.Org Video Driver
[ 10.270] (II) Loading sub module "fglrxdrm"
[ 10.270] (II) LoadModule: "fglrxdrm"
[ 10.270] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 10.270] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 10.270] compiled for 1.4.99.906, module version = 14.20.7
[ 10.270] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 10.270] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002
[ 10.270] (II) AMD Proprietary Linux Driver Build Date: Sep 2 2014 10:14:55
[ 10.270] (++) using VT number 1
[ 10.270] (WW) Falling back to old probe method for fglrx
[ 10.274] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 10.275] ukiDynamicMajor: found major device number 251
[ 10.275] ukiDynamicMajor: found major device number 251
[ 10.275] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 10.275] ukiOpenDevice: node name is /dev/ati/card0
[ 10.275] ukiOpenDevice: open result is 11, (OK)
[ 10.275] ukiOpenByBusid: ukiOpenMinor returns 11
[ 10.275] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 10.277] (--) Chipset Supported AMD Graphics Processor (0x6600) found
[ 10.277] (II) fglrx: intel VGA device detected, load intel driver.
[ 10.277] (II) LoadModule: "intel"
[ 10.277] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 10.278] (II) Module intel: vendor="X.Org Foundation"
[ 10.278] compiled for 1.16.1, module version = 2.99.916
[ 10.278] Module class: X.Org Video Driver
[ 10.278] ABI class: X.Org Video Driver, version 18.0
[ 10.278] (II) fglrx(0): pEnt->device->identifier=0x11c8f80
[ 10.278] (II) intel(1): pEnt->device->identifier=(nil)
[ 10.278] (EE) Screen 1 deleted because of no matching config section.
[ 10.278] (II) UnloadModule: "intel"
[ 10.278] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[ 10.278] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[ 10.348] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibGL:
Switch to AMD
[ 10.351] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 10.351] (==) fglrx(0): RGB weight 888
[ 10.351] (==) fglrx(0): Default visual is TrueColor
[ 10.351] (**) fglrx(0): Option "Tiling" "off"
[ 10.351] (**) fglrx(0): Option "LinearFramebuffer" "on"
[ 10.351] (**) fglrx(0): ChipID override: 0x0A16
[ 10.351] (**) fglrx(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[ 10.351] (**) fglrx(0): Relaxed fencing enabled
[ 10.351] (**) fglrx(0): Wait on SwapBuffers? enabled
[ 10.351] (**) fglrx(0): Triple buffering? enabled
[ 10.351] (**) fglrx(0): Framebuffer linear
[ 10.351] (**) fglrx(0): Pixmaps linear
[ 10.351] (**) fglrx(0): 3D buffers tiled
[ 10.351] (**) fglrx(0): SwapBuffers wait enabled
[ 10.351] (==) fglrx(0): video overlay key set to 0x101fe
[ 10.352] (II) fglrx(0): Output eDP1 using monitor section aticonfig-Monitor[0]-0
[ 10.352] (--) fglrx(0): found backlight control interface intel_backlight
[ 10.352] (II) fglrx(0): Output DP1 has no monitor section
[ 10.376] (II) fglrx(0): Output HDMI1 has no monitor section
[ 10.376] (II) fglrx(0): Output DP2 has no monitor section
[ 10.377] (II) fglrx(0): Output HDMI2 has no monitor section
[ 10.377] (II) fglrx(0): EDID for output eDP1
[ 10.377] (II) fglrx(0): Manufacturer: AUO Model: 113d Serial#: 0
[ 10.377] (II) fglrx(0): Year: 2012 Week: 0
[ 10.377] (II) fglrx(0): EDID Version: 1.4
[ 10.377] (II) fglrx(0): Digital Display Input
[ 10.377] (II) fglrx(0): 6 bits per channel
[ 10.377] (II) fglrx(0): Digital interface is DisplayPort
[ 10.377] (II) fglrx(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 10.377] (II) fglrx(0): Gamma: 2.20
[ 10.377] (II) fglrx(0): No DPMS capabilities specified
[ 10.377] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 10.377] (II) fglrx(0): First detailed timing is preferred mode
[ 10.377] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 10.377] (II) fglrx(0): redX: 0.643 redY: 0.336 greenX: 0.313 greenY: 0.620
[ 10.377] (II) fglrx(0): blueX: 0.151 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
[ 10.377] (II) fglrx(0): Manufacturer's mask: 0
[ 10.377] (II) fglrx(0): Supported detailed timing:
[ 10.377] (II) fglrx(0): clock: 141.0 MHz Image Size: 309 x 173 mm
[ 10.377] (II) fglrx(0): h_active: 1920 h_sync: 1936 h_sync_end 1952 h_blank_end 2104 h_border: 0
[ 10.377] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1097 v_blanking: 1116 v_border: 0
[ 10.377] (II) fglrx(0): Unknown vendor-specific block f
[ 10.377] (II) fglrx(0): AUO
[ 10.377] (II) fglrx(0): B140HAN01.1
[ 10.377] (II) fglrx(0): EDID (in hex):
[ 10.377] (II) fglrx(0): 00ffffffffffff0006af3d1100000000
[ 10.377] (II) fglrx(0): 00160104951f11780287e5a456509e26
[ 10.377] (II) fglrx(0): 0d505400000001010101010101010101
[ 10.378] (II) fglrx(0): 010101010101143780b8703824401010
[ 10.378] (II) fglrx(0): 3e0035ad100000180000000f00000000
[ 10.378] (II) fglrx(0): 00000000000000000020000000fe0041
[ 10.378] (II) fglrx(0): 554f0a202020202020202020000000fe
[ 10.378] (II) fglrx(0): 004231343048414e30312e31200a00a5
[ 10.378] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 10.378] (II) fglrx(0): Printing probed modes for output eDP1
[ 10.378] (II) fglrx(0): Modeline "1920x1080"x60.0 141.00 1920 1936 1952 2104 1080 1083 1097 1116 -hsync -vsync (67.0 kHz eP)
[ 10.378] (II) fglrx(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 10.378] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 10.378] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 10.378] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 10.378] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 10.378] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 10.378] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 10.378] (II) fglrx(0): EDID for output DP1
[ 10.403] (II) fglrx(0): EDID for output HDMI1
[ 10.403] (II) fglrx(0): EDID for output DP2
[ 10.403] (II) fglrx(0): EDID for output HDMI2
[ 10.403] (II) fglrx(0): Output eDP1 connected
[ 10.403] (II) fglrx(0): Output DP1 disconnected
[ 10.403] (II) fglrx(0): Output HDMI1 disconnected
[ 10.403] (II) fglrx(0): Output DP2 disconnected
[ 10.403] (II) fglrx(0): Output HDMI2 disconnected
[ 10.403] (II) fglrx(0): Using exact sizes for initial modes
[ 10.403] (II) fglrx(0): Output eDP1 using initial mode 1920x1080
[ 10.403] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 10.403] (II) fglrx(0): Kernel page flipping support detected, enabling
[ 10.403] (==) fglrx(0): DPI set to (96, 96)
[ 10.403] (II) Loading sub module "fb"
[ 10.403] (II) LoadModule: "fb"
[ 10.403] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.404] (II) Module fb: vendor="X.Org Foundation"
[ 10.404] compiled for 1.16.2, module version = 1.0.0
[ 10.404] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.404] (II) Loading sub module "dri2"
[ 10.404] (II) LoadModule: "dri2"
[ 10.404] (II) Module "dri2" already built-in
[ 10.404] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 10.404] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 10.404] (==) fglrx(0): Default visual is TrueColor
[ 10.404] (**) fglrx(0): Option "DPMS" "true"
[ 10.404] (==) fglrx(0): RGB weight 888
[ 10.404] (II) fglrx(0): Using 8 bits per RGB
[ 10.404] (==) fglrx(0): Buffer Tiling is ON
[ 10.404] (II) Loading sub module "fglrxdrm"
[ 10.404] (II) LoadModule: "fglrxdrm"
[ 10.404] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 10.404] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 10.404] compiled for 1.4.99.906, module version = 14.20.7
[ 10.405] ukiDynamicMajor: found major device number 251
[ 10.405] ukiDynamicMajor: found major device number 251
[ 10.405] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 10.405] ukiOpenDevice: node name is /dev/ati/card0
[ 10.405] ukiOpenDevice: open result is 14, (OK)
[ 10.405] ukiOpenByBusid: ukiOpenMinor returns 14
[ 10.405] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 10.405] (**) fglrx(0): NoAccel = NO
[ 10.405] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 10.405] (--) fglrx(0): Chipset: "AMD Radeon HD 8600/8700M" (Chipset = 0x6600)
[ 10.405] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x082b)
[ 10.405] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 10.405] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[ 10.405] (--) fglrx(0): MMIO registers at 0xc0500000
[ 10.405] (--) fglrx(0): I/O port at 0x00003000
[ 10.405] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 10.405] (II) fglrx(0): AC Adapter is used
[ 10.405] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 10.405] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3
[ 10.405] (II) fglrx(0): PCIE card detected
[ 10.405] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 10.405] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 10.414] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 10.414] (II) fglrx(0): RandR 1.2 support is enabled!
[ 10.414] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 10.414] (II) Loading sub module "fb"
[ 10.414] (II) LoadModule: "fb"
[ 10.414] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.414] (II) Module fb: vendor="X.Org Foundation"
[ 10.414] compiled for 1.16.2, module version = 1.0.0
[ 10.414] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.414] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 10.414] (II) Loading sub module "ddc"
[ 10.414] (II) LoadModule: "ddc"
[ 10.414] (II) Module "ddc" already built-in
[ 10.418] (II) fglrx(0): Adapter AMD Radeon HD 8600/8700M has 2 configurable heads and 0 displays connected.
[ 10.418] (==) fglrx(0): PseudoColor visuals disabled
[ 10.418] (II) Loading sub module "ramdac"
[ 10.418] (II) LoadModule: "ramdac"
[ 10.418] (II) Module "ramdac" already built-in
[ 10.418] (==) fglrx(0): NoDRI = NO
[ 10.418] (==) fglrx(0): Capabilities: 0x00000000
[ 10.418] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 10.418] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 10.418] (==) fglrx(0): UseFastTLS=0
[ 10.418] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[ 10.418] (--) Depth 24 pixmap format is 32 bpp
[ 10.418] (II) LoadModule: "glesx"
[ 10.418] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 10.419] (II) Module glesx: vendor="X.Org Foundation"
[ 10.419] compiled for 1.4.99.906, module version = 1.0.0
[ 10.419] (II) fglrx(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
[ 10.419] (II) UXA(0): Driver registered support for the following operations:
[ 10.419] (II) solid
[ 10.419] (II) copy
[ 10.419] (II) composite (RENDER acceleration)
[ 10.419] (II) put_image
[ 10.419] (II) get_image
[ 10.419] (II) fglrx(0): [DRI2] Setup complete
[ 10.419] (II) fglrx(0): [DRI2] DRI driver: i965
[ 10.419] (II) fglrx(0): [DRI2] VDPAU driver: i965
[ 10.419] (==) fglrx(0): Backing store enabled
[ 10.419] (==) fglrx(0): Silken mouse enabled
[ 10.419] (II) fglrx(0): Initializing HW Cursor
[ 10.419] (II) fglrx(0): Use legacy UXA acceleration.
[ 10.419] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.420] (**) fglrx(0): DPMS enabled
[ 10.420] (==) fglrx(0): Intel XvMC decoder enabled
[ 10.420] (II) fglrx(0): Set up textured video
[ 10.420] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
[ 10.420] (II) fglrx(0): DRI2: Enabled
[ 10.420] (II) fglrx(0): DRI3: Not available
[ 10.420] (WW) fglrx(0): Option "VendorName" is not used
[ 10.420] (WW) fglrx(0): Option "ModelName" is not used
[ 10.420] (WW) fglrx(0): Option "Shadow" is not used
[ 10.420] (WW) fglrx(0): Option "Tiling" is not used
[ 10.420] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 10.420] (==) fglrx(0): hotplug detection: "enabled"
[ 10.420] (EE)
[ 10.420] (EE) Backtrace:
[ 10.420] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x593d36]
[ 10.420] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x197e89) [0x597e89]
[ 10.420] (EE) 2: /usr/lib/libc.so.6 (0x7ffc40b40000+0x33b20) [0x7ffc40b73b20]
[ 10.420] (EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ffc3ce1e000+0x16335) [0x7ffc3ce34335]
[ 10.420] (EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ffc3ce1e000+0x12deb9) [0x7ffc3cf4beb9]
[ 10.420] (EE) 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ffc3ce1e000+0x12e425) [0x7ffc3cf4c425]
[ 10.420] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs116_atiddxPxScreenInit+0x72) [0x7ffc3d953a82]
[ 10.420] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs116_atiddxScreenInit+0x11fa) [0x7ffc3d9303ba]
[ 10.420] (EE) 8: /usr/bin/Xorg.bin (AddScreen+0x101) [0x437a41]
[ 10.420] (EE) 9: /usr/bin/Xorg.bin (InitOutput+0x3df) [0x479bcf]
[ 10.420] (EE) 10: /usr/bin/Xorg.bin (0x400000+0x3b65a) [0x43b65a]
[ 10.420] (EE) 11: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7ffc40b60040]
[ 10.420] (EE) 12: /usr/bin/Xorg.bin (0x400000+0x25d0e) [0x425d0e]
[ 10.420] (EE)
[ 10.420] (EE) Segmentation fault at address 0x18
[ 10.420] (EE)
Fatal server error:
[ 10.420] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 10.420] (EE)
[ 10.420] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 10.420] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 10.420] (EE)I can't understand what is wrong. Could you please help?
Offline
#6813 2014-12-08 22:40:16
- Xabre
- Member
- From: Serbia
- Registered: 2009-03-19
- Posts: 755
Re: The AMD/ATI Bar & Grill
Have the same combo, Intel Haswell/AMD Radeon 8750M, it just won't work with xorg 1.16. Have you tried using xorg 1.15 repo?
Offline
#6814 2014-12-09 08:19:36
- Sarge
- Member
- Registered: 2014-07-21
- Posts: 14
Re: The AMD/ATI Bar & Grill
Xabre wrote:
Have the same combo, Intel Haswell/AMD Radeon 8750M, it just won't work with xorg 1.16. Have you tried using xorg 1.15 repo?
No I don't.
catalyst-test package is compatible with 1.6 (but it is test version - may be it is just unstable)
If you combo is working well on xorg 1.15, could you please provide additional info (version of catalyst, used packages, repo, etc)?
Thank you in advance
Offline
#6815 2014-12-09 09:44:12
- mazrimtaim1914
- Member
- Registered: 2014-02-05
- Posts: 4
Re: The AMD/ATI Bar & Grill
@Vi0L0
Hi,
today a new Amd Catalyst 14.12 (http://support.amd.com/en-us/download/d … x%20x86_64) version is out!
When are you updating your repositories?
As stated in the release notes (http://support.amd.com/en-us/kb-article … Notes.aspx) this is the first AMD Catalyst™ OMEGA Linux Release.
Keep up the good work!
Last edited by mazrimtaim1914 (2014-12-09 09:46:53)
Offline
#6816 2014-12-09 10:42:18
- Xabre
- Member
- From: Serbia
- Registered: 2009-03-19
- Posts: 755
Re: The AMD/ATI Bar & Grill
Sarge wrote:
Xabre wrote:Have the same combo, Intel Haswell/AMD Radeon 8750M, it just won't work with xorg 1.16. Have you tried using xorg 1.15 repo?
No I don't.
catalyst-test package is compatible with 1.6 (but it is test version - may be it is just unstable)
If you combo is working well on xorg 1.15, could you please provide additional info (version of catalyst, used packages, repo, etc)?
Thank you in advance
Am using catalyst-test-pxp from AUR and fully upgraded Arch (with xorg115 repo added). It's one thing to claim compatibility, reality is something else. Catalyst works with regular setup on my desktop machine, but PowerExpress (at least with my Intel/AMD combo) is crashing the server right away (or completely freezing the machine if display manager is enabled).
From my experiments I came to a conclusion that it's the Intel driver that poses the problem for Catalyst, as it works fine with xf86-video-intel 2.99.910 from Vi0L0's xorg115 repo. I tried rebuilding older Intel driver against new Xorg, but even though it builds, it ends u having various graphical glitches (invisible cursor for one), git version of intel driver also crashes on start if Catalyst is used.
Last edited by Xabre (2014-12-09 10:44:50)
Offline
#6817 2014-12-09 12:46:40
- The Mighty Buzzard
- Member
- Registered: 2014-08-02
- Posts: 6
Re: The AMD/ATI Bar & Grill
Having the following issue since https://www.archlinux.org/news/gnupg-21 … n-keyring/
error: database 'catalyst' is not valid (invalid or corrupted database (PGP signature))Any hints on how to resolve this?
Offline
#6818 2014-12-09 13:20:15
- clfarron4
- Member
- From: London, UK
- Registered: 2013-06-28
- Posts: 2,163
- Website
Re: The AMD/ATI Bar & Grill
The Mighty Buzzard wrote:
Having the following issue since https://www.archlinux.org/news/gnupg-21 … n-keyring/
error: database 'catalyst' is not valid (invalid or corrupted database (PGP signature))Any hints on how to resolve this?
Have you added the key back into the keyring? Those commands nuke the keyring, so you have to rebuild it, adding back all the extra keys you put in and signed.
Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository
Offline
#6819 2014-12-09 14:34:23
- TheNumb
- Member
- Registered: 2013-10-01
- Posts: 4
Re: The AMD/ATI Bar & Grill
The new "Omega" drivers are out!
Offline
#6820 2014-12-09 15:55:57
- The Mighty Buzzard
- Member
- Registered: 2014-08-02
- Posts: 6
Re: The AMD/ATI Bar & Grill
clfarron4 wrote:
Have you added the key back into the keyring? Those commands nuke the keyring, so you have to rebuild it, adding back all the extra keys you put in and signed.
Yep, get the following when I try.
error: key "Vi0L0 <vi0l093@gmail.com>" could not be importedOffline
#6821 2014-12-09 16:10:29
- snack
- Member
- From: Italy
- Registered: 2009-01-13
- Posts: 874
Re: The AMD/ATI Bar & Grill
The Mighty Buzzard wrote:
clfarron4 wrote:Have you added the key back into the keyring? Those commands nuke the keyring, so you have to rebuild it, adding back all the extra keys you put in and signed.
Yep, get the following when I try.
error: key "Vi0L0 <vi0l093@gmail.com>" could not be imported
Try with sudo pacman-key -r <keyid> and then sign it. Worked for me in resolving a similar issue.
Offline
#6822 2014-12-09 19:46:40
- parchedas
- Member
- From: Cambridge, UK
- Registered: 2013-06-01
- Posts: 74
Re: The AMD/ATI Bar & Grill
Jarno wrote:
Do you guys have that problem that Unity3D games, like Rust and 7 Days to Die, freezes Xorg and computer hardlocks like even REISUB isn't working?
When Xorg freezes, I can connect to computer with SSH and when checking with htop it shows that Xorg.bin hogs 100% of 1 core.
When Xorg freezes, only thing I can do is force restart with power button or sudo reboot when connected with SSH.
In journalctl there is "[fglrx] ASIC hang happened" error when Xorg freezes, journalctl shown below.
I get a similar thing with CS:GO, HD7850 too.
Regarding REISUB, do you have it enabled? Initially I didn't so had to hard reset.
Offline
#6823 2014-12-09 20:53:03
- The Mighty Buzzard
- Member
- Registered: 2014-08-02
- Posts: 6
Re: The AMD/ATI Bar & Grill
snack wrote:
Try with sudo pacman-key -r <keyid> and then sign it. Worked for me in resolving a similar issue.
Cheers, worked like a charm.
Offline
#6824 2014-12-10 17:42:13
- turboNOMAD
- Member
- From: Ukraine
- Registered: 2009-09-06
- Posts: 21
Re: The AMD/ATI Bar & Grill
Hi Violo,
Do you plan to update catalyst-test package in the AUR?
Offline
#6825 2014-12-10 18:11:24
- Xabre
- Member
- From: Serbia
- Registered: 2009-03-19
- Posts: 755
Re: The AMD/ATI Bar & Grill
He said on AUR Catalyst page that he's AFK and will see about new driver this evening when he's able.
Offline