JTAG adapter ULINK-ME and openocd

71GA · 2014-11-23 08:35:37

I installed Openocd from opfficial repositories today and am now trying to use it with my JTAG adapter ULINK-ME. I found out that ULINK-ME uses CMSIS-DAP debugging firmware. Openocd has CMSIS-DAP drivers and should therefore be able to communicate with my adapter but after I wrote the command below I got an error. I am connecting ULINK-ME to the board EA3141 which integrates microcontroller LPC3141 - a close relative to LPC3131 for whom I load the configuration file.

sudo openocd -f /usr/local/share/openocd/scripts/interface/cmsis-dap.cfg -f /usr/local/share/openocd/scripts/target/lpc3131.cfg -d3

Open On-Chip Debugger 0.8.0-dev-00175-g8b7acca-dirty (2014-10-14-19:53)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.sourceforge.net/doc/doxygen/bugs.html
User : 13 1 command.c:549 command_print(): debug_level: 3
Debug: 14 1 configuration.c:45 add_script_search_dir(): adding /root/.openocd
Debug: 15 1 configuration.c:45 add_script_search_dir(): adding /usr/local/share/openocd/site
Debug: 16 1 configuration.c:45 add_script_search_dir(): adding /usr/local/share/openocd/scripts
Debug: 17 1 configuration.c:86 find_file(): found /usr/local/share/openocd/scripts/interface/cmsis-dap.cfg
Debug: 18 1 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_interface cmsis-dap
Debug: 19 2 command.c:145 script_debug(): command - interface ocd_interface cmsis-dap
Debug: 21 2 command.c:369 register_command_handler(): registering 'ocd_cmsis-dap'...
Debug: 22 2 command.c:369 register_command_handler(): registering 'ocd_cmsis_dap_vid_pid'...
Debug: 23 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 24 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 25 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 26 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 27 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 28 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 29 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 30 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 31 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Info : 32 2 transport.c:118 allow_transports(): only one transport option; autoselect 'cmsis-dap'
Debug: 33 2 adi_v5_cmsis_dap.c:246 cmsis_dap_select(): CMSIS-ADI: cmsis_dap_select
Debug: 34 2 command.c:404 register_command(): command 'cmsis-dap' is already registered in '<global>' context
Debug: 35 2 command.c:369 register_command_handler(): registering 'ocd_cmsis-dap'...
Error: 36 7 cmsis_dap_usb.c:175 cmsis_dap_usb_open(): unable to open CMSIS-DAP device
Error: 37 7 adi_v5_cmsis_dap.c:266 cmsis_dap_select(): unable to init CMSIS-DAP driver
Error: 38 7 transport.c:83 transport_select(): Error selecting 'cmsis-dap' as transport
Debug: 39 7 command.c:631 run_command(): Command failed with error code -4
User : 40 7 command.c:669 command_run_line(): Runtime Error: /usr/local/share/openocd/scripts/interface/cmsis-dap.cfg:7: 
in procedure 'script' 
at file "embedded:startup.tcl", line 58
in procedure 'interface' called at file "/usr/local/share/openocd/scripts/interface/cmsis-dap.cfg", line 7

Does anyone know why I get the errors?

EDIT:
I allso tried to start it in another way but again it prints errors. A bit difrently this time.

sudo openocd -c "interface cmsis-dap" -f /usr/local/share/openocd/scripts/target/lpc3131.cfg -d3

Open On-Chip Debugger 0.8.0-dev-00175-g8b7acca-dirty (2014-10-14-19:53)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.sourceforge.net/doc/doxygen/bugs.html
User : 13 2 command.c:549 command_print(): debug_level: 3
Debug: 14 2 configuration.c:45 add_script_search_dir(): adding /root/.openocd
Debug: 15 2 configuration.c:45 add_script_search_dir(): adding /usr/local/share/openocd/site
Debug: 16 2 configuration.c:45 add_script_search_dir(): adding /usr/local/share/openocd/scripts
Debug: 17 2 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_interface cmsis-dap
Debug: 18 2 command.c:145 script_debug(): command - interface ocd_interface cmsis-dap
Debug: 20 2 command.c:369 register_command_handler(): registering 'ocd_cmsis-dap'...
Debug: 21 2 command.c:369 register_command_handler(): registering 'ocd_cmsis_dap_vid_pid'...
Debug: 22 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 23 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 24 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 25 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 26 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 27 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 28 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 29 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Debug: 30 2 command.c:369 register_command_handler(): registering 'ocd_jtag'...
Info : 31 2 transport.c:118 allow_transports(): only one transport option; autoselect 'cmsis-dap'
Debug: 32 2 adi_v5_cmsis_dap.c:246 cmsis_dap_select(): CMSIS-ADI: cmsis_dap_select
Debug: 33 2 command.c:404 register_command(): command 'cmsis-dap' is already registered in '<global>' context
Debug: 34 2 command.c:369 register_command_handler(): registering 'ocd_cmsis-dap'...
Error: 35 7 cmsis_dap_usb.c:175 cmsis_dap_usb_open(): unable to open CMSIS-DAP device
Error: 36 7 adi_v5_cmsis_dap.c:266 cmsis_dap_select(): unable to init CMSIS-DAP driver
Error: 37 7 transport.c:83 transport_select(): Error selecting 'cmsis-dap' as transport
Debug: 38 7 command.c:631 run_command(): Command failed with error code -4
User : 39 7 command.c:669 command_run_line(): in procedure 'interface'

Last edited by 71GA (2014-11-23 08:41:35)

Arch Linux

#1 2014-11-23 08:35:37

JTAG adapter ULINK-ME and openocd

Board footer