You are not logged in.

Pages: 1

#1 2014-11-30 03:21:04

IlPrincipino
Member
Registered: 2010-06-10
Posts: 61

Grub not working - UEFI - Gigabyte GA-B75m-D3V

Hello, I just installed Arch and grub isnt starting. I followed the advice on the internet for UEFI systems and created a dedicated partition for /boot. However, when trying to boot from it, grub gives the error unknown filesystem
This is my system:
/dev/sda1    fat32    512MB    boot,esp
/dev/sda2    linux-swap     2048MB       
/dev/sda4    ext4      43.78GB     

Any help would be really appreciated. Thanks.

Last edited by IlPrincipino (2014-11-30 03:24:02)

Offline

#2 2014-11-30 03:30:30

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: Grub not working - UEFI - Gigabyte GA-B75m-D3V

Post your grub config and the output of `blkid`...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2014-11-30 03:49:21

IlPrincipino
Member
Registered: 2010-06-10
Posts: 61

Re: Grub not working - UEFI - Gigabyte GA-B75m-D3V

Hello, here it is:


grub.conf:

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos4 --hint-efi=hd0,msdos4 --hint-baremetal=ahci0,msdos4  8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7
else
  search --no-floppy --fs-uuid --set=root 8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
  set timeout_style=menu
  set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
  set timeout=5
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod fat
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  B257-9E4D
    else
      search --no-floppy --fs-uuid --set=root B257-9E4D
    fi
    echo    'Loading Linux linux ...'
    linux    /vmlinuz-linux root=UUID=8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7 rw  quiet
    echo    'Loading initial ramdisk ...'
    initrd     /initramfs-linux.img
}
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7' {
    menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7' {
        load_video
        set gfxpayload=keep
        insmod gzio
        insmod part_msdos
        insmod fat
        set root='hd0,msdos1'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  B257-9E4D
        else
          search --no-floppy --fs-uuid --set=root B257-9E4D
        fi
        echo    'Loading Linux linux ...'
        linux    /vmlinuz-linux root=UUID=8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7 rw  quiet
        echo    'Loading initial ramdisk ...'
        initrd     /initramfs-linux.img
    }
    menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7' {
        load_video
        set gfxpayload=keep
        insmod gzio
        insmod part_msdos
        insmod fat
        set root='hd0,msdos1'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  B257-9E4D
        else
          search --no-floppy --fs-uuid --set=root B257-9E4D
        fi
        echo    'Loading Linux linux ...'
        linux    /vmlinuz-linux root=UUID=8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7 rw  quiet
        echo    'Loading initial ramdisk ...'
        initrd     /initramfs-linux-fallback.img
    }
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###



blkid:

/dev/sdb1: LABEL="Data Volume I" UUID="083417E23417D214" TYPE="ntfs" PARTUUID="9d25f988-01"
/dev/sda1: UUID="B257-9E4D" TYPE="vfat" PARTUUID="d7269934-01"
/dev/sda2: UUID="dc1a35b9-5cb1-4353-b7d8-eb2ca856c907" TYPE="swap" PARTUUID="d7269934-02"
/dev/sda3: LABEL="Data Volume II" UUID="442108C85ED99D4F" TYPE="ntfs" PARTUUID="d7269934-03"
/dev/sda4: UUID="8a5484f9-e12f-42c1-9fcd-3ac3408f8ff7" TYPE="ext4" PARTUUID="d7269934-04"
/dev/sdc1: UUID="2014-08-07-02-28-36-00" LABEL="ANTERGOS" TYPE="iso9660" PTUUID="77582134" PTTYPE="dos" PARTUUID="77582134-01"
/dev/sdc2: SEC_TYPE="msdos" LABEL="ARCHISO_EFI" UUID="337C-96D7" TYPE="vfat" PARTUUID="77582134-02"
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="9ff50ec2-96ad-4b29-a68b-f09d5aeb36c8" TYPE="ext4"
/dev/loop2: UUID="9ff50ec2-96ad-4b29-a68b-f09d5aeb36c8" TYPE="ext4"
/dev/mapper/arch_root-image: UUID="9ff50ec2-96ad-4b29-a68b-f09d5aeb36c8" TYPE="ext4"

Last edited by IlPrincipino (2014-11-30 16:22:14)

Offline

#4 2014-11-30 03:52:43

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: Grub not working - UEFI - Gigabyte GA-B75m-D3V

Please use code tags when pasting to the boards: https://wiki.archlinux.org/index.php/Fo … s_and_Code

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#5 2014-11-30 16:22:26

IlPrincipino
Member
Registered: 2010-06-10
Posts: 61

Re: Grub not working - UEFI - Gigabyte GA-B75m-D3V

jasonwryan wrote:

Please use code tags when pasting to the boards: https://wiki.archlinux.org/index.php/Fo … s_and_Code

Done

Offline

Pages: 1

Board footer

Powered by FluxBB