You are not logged in.
Pages: 1
Hi
I'm compiling a tex-file with the code below. I use xelatex
and although I get the message
Process exited normally
when I open the pdf file, there is no picture.
When I'm in Debian, with the same file I'm getting the full picture.
I would like to know what to do to have the full picture in arch linux
Thanks
The code (was created in latexdraw)
\begin{figure}[htd]
\centering
\scalebox{1} % Change this value to rescale the drawing.
{
\begin{pspicture}(0,-2.01)(5.781875,2.0140624)
\psline[linewidth=0.04](0.1,1.29)(0.12,-1.33)(1.52,-1.33)(1.52,-0.73)(3.32,-0.73)(3.32,-1.33)(3.92,-1.33)
\psline[linewidth=0.04](4.12,-1.31)(4.72,-1.31)(4.72,1.29)(3.32,1.27)(3.32,0.87)(1.52,0.87)(1.52,1.27)(0.52,1.27)
\psline[linewidth=0.04](1.52,0.49)(1.52,-0.31)(3.32,-0.31)(3.32,0.47)(1.52,0.47)
\psline[linewidth=0.04cm,arrowsize=0.05291667cm 2.0,arrowlength=1.4,arrowinset=0.4]{->}(2.5,0.65)(1.86,0.65)
\psline[linewidth=0.04cm,arrowsize=0.05291667cm 2.0,arrowlength=1.4,arrowinset=0.4]{->}(0.0,1.99)(0.28,1.29)
\psline[linewidth=0.04cm,arrowsize=0.05291667cm 2.0,arrowlength=1.4,arrowinset=0.4]{->}(4.02,-1.35)(4.22,-1.99)
\psline[linewidth=0.04cm,arrowsize=0.05291667cm 2.0,arrowlength=1.4,arrowinset=0.4]{->}(1.92,-0.53)(2.62,-0.53)
\usefont{T1}{ptm}{m}{n}
\rput(3.2375,0.655){\footnotesize $2lt/min$}
\usefont{T1}{ptm}{m}{n}
\rput(3.3214064,-0.505){\footnotesize $8lt/min$}
\usefont{T1}{ptm}{m}{n}
\rput(0.9975,1.835){\small $6lt/min$}
\usefont{T1}{ptm}{m}{n}
\rput(5.061406,-1.585){\small $6lt/min$}
\usefont{T1}{ptm}{m}{n}
\rput(4.0075,0.135){\small $T_{2}$}
\usefont{T1}{ptm}{m}{n}
\rput(1.1214062,0.115){\small $T_{1}$}
\end{pspicture}
}
\caption{two tanks}
\end{figure}
Offline
Please use code tags and proper punctuation.
https://ugjka.net
paru > yay | webcord > discord
pacman -S spotify-launcher
mount /dev/disk/by-...
Offline
And post a fully compiling source test case and the output of xelatex
Last edited by arojas (2014-12-11 08:24:29)
Offline
I' m posting the tex code and the pdf file. It is the first time I'm posting picture and code, so I'm sorry if something is not ok
The tex code,
\documentclass[reqno,a4paper,twoside,11pt]{stml-l}
\usepackage{amsfonts}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{amsthm,xfrac}
\usepackage[toc,page]{appendix}
\usepackage{mathtools}
\usepackage{eulervm}
\usepackage{unicode-math}
\usepackage{pdfsync}
\usepackage{xltxtra}
\setmainfont{Linux Libertine O}
\setmathfont{xits-math.otf}
\addtolength{\oddsidemargin}{-.75in}
\addtolength{\evensidemargin}{-.75in}
\addtolength{\textwidth}{1.5in}
\addtolength{\topmargin}{-.875in}
\addtolength{\textheight}{1.75in}
\usepackage[bookmarks=false,plainpages=false,
colorlinks,urlcolor=blue,unicode,
bookmarksopen,pdfstartview=FitH]
{hyperref}
\usepackage{graphics}
\usepackage{epsfig,wrapfig}%,subfigure
%\usepackage%[dvipdfm,hiresbb,dvips]%{graphicx}
\usepackage{psfrag}
\usepackage{pstricks}
\usepackage[a4paper,text={15.5cm,22.2cm},centering]{geometry}
\begin{document}
\begin{figure}[htd]
\centering
\scalebox{1} % Change this value to rescale the drawing.
{
\begin{pspicture}(0,-2.01)(5.781875,2.0140624)
\psline[linewidth=0.04](0.1,1.29)(0.12,-1.33)(1.52,-1.33)(1.52,-0.73)(3.32,-0.73)(3.32,-1.33)(3.92,-1.33)
\psline[linewidth=0.04](4.12,-1.31)(4.72,-1.31)(4.72,1.29)(3.32,1.27)(3.32,0.87)(1.52,0.87)(1.52,1.27)(0.52,1.27)
\psline[linewidth=0.04](1.52,0.49)(1.52,-0.31)(3.32,-0.31)(3.32,0.47)(1.52,0.47)
\psline[linewidth=0.04cm,arrowsize=0.05291667cm 2.0,arrowlength=1.4,arrowinset=0.4]{->}(2.5,0.65)(1.86,0.65)
\psline[linewidth=0.04cm,arrowsize=0.05291667cm 2.0,arrowlength=1.4,arrowinset=0.4]{->}(0.0,1.99)(0.28,1.29)
\psline[linewidth=0.04cm,arrowsize=0.05291667cm 2.0,arrowlength=1.4,arrowinset=0.4]{->}(4.02,-1.35)(4.22,-1.99)
\psline[linewidth=0.04cm,arrowsize=0.05291667cm 2.0,arrowlength=1.4,arrowinset=0.4]{->}(1.92,-0.53)(2.62,-0.53)
\usefont{T1}{ptm}{m}{n}
\rput(3.2375,0.655){\footnotesize $2lt/min$}
\usefont{T1}{ptm}{m}{n}
\rput(3.3214064,-0.505){\footnotesize $8lt/min$}
\usefont{T1}{ptm}{m}{n}
\rput(0.9975,1.835){\small $6lt/min$}
\usefont{T1}{ptm}{m}{n}
\rput(5.061406,-1.585){\small $6lt/min$}
\usefont{T1}{ptm}{m}{n}
\rput(4.0075,0.135){\small $T_{2}$}
\usefont{T1}{ptm}{m}{n}
\rput(1.1214062,0.115){\small $T_{1}$}
\end{pspicture}
}
\caption{two tanks}
\end{figure}
\end{document}.
the pdf ouput
Offline
It would help if you could strip out all working code and leave a minimal example that shows the error. I tried to compile but I get errors on the fonts.
Offline
To have a '' minimal code''
In the tex code
I changed the document class from smtl-l to book
and I comment the lines
%\usepackage{eulervm}
%\usepackage{unicode-math}
%\usepackage{pdfsync}
%\usepackage{xltxtra}
%\setmainfont{Linux Libertine O}
%\setmathfont{xits-math.otf}
%\addtolength{\oddsidemargin}{-.75in}
%\addtolength{\evensidemargin}{-.75in}
%\addtolength{\textwidth}{1.5in}
%\addtolength{\topmargin}{-.875in}
%\addtolength{\textheight}{1.75in}
%\usepackage[bookmarks=false,plainpages=false,
%colorlinks,urlcolor=blue,unicode,
%bookmarksopen,pdfstartview=FitH]
%{hyperref}.
the pdf output is the same.
(I have install texlive is from arch)
Offline
The problem seems to be with ghostscript. Downgrading from 9.15-1 to 9.14-1 solved the issue for me (found here). At least there is schematic picture now, not sure of course if it is completely correct.
Offline
The solution of FreeTheBee works perfect, downgrading ghostscipt from 9.15-1 to 9.14-1, I'm getting the full picture.
thanks
Offline
Pages: 1